Small Size LCD/LED Monitors
UML-080-90 | UML-082-90 | UML-100-90 | UML-102-90
en User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Table of Contents | en
3
Table of Contents
1
Safety
5
5
1.1
1.2
1.3
1.4
Important safety instructions
Safety precautions
8
Important notices
8
Customer Support and Service
15
2
Unpacking
17
2.1
Parts List
17
3
Exploded View
18
4
Description
Features
Power
21
21
22
4.1
4.2
5
Installing the Monitor
Ventilation
23
23
23
23
24
24
25
25
26
26
5.1
5.2
5.2.1
5.2.2
5.3
5.4
5.5
5.6
5.7
Mounting the Monitor
Desktop Installation
Wall Mount Installation
Connecting the Composite Video Signal to the Monitor
Connecting the Y/C (S-Video) Signal to the Monitor
Connecting Audio to the Monitor
Connecting the PC Signal to the Monitor
Single / Multiple Monitor Configuration
6
Navigating the Monitor
28
28
29
30
30
32
6.1
6.2
6.3
6.4
6.5
Navigating the Front Panel
Navigating the Monitor On-screen Display (OSD)
On-screen Display Menus
Custom Menu
Picture/Sound Menu
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
4
en | Table of Contents
Setup Menu
Small Size LCD/LED Monitors
34
6.6
7
Power Management
36
36
36
7.1
7.2
Power Consumption
LED Indicator
8
9
Troubleshooting
Maintenance
37
38
10
Technical Specifications
UML-080-90/UML-100-90
UML-082-90/UML-102-90
39
39
40
10.1
10.2
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Safety | en
5
1
Safety
1.1
Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Unplug the unit from the outlet before cleaning.
Follow any instructions provided with the unit. Generally,
using a dry cloth for cleaning is sufficient, but a moist fluff-
free cloth or leather shammy may also be used. Do not use
liquid cleaners or aerosol cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Ventilation - Any openings in the unit enclosure are
provided for ventilation to prevent overheating and ensure
reliable operation. Do not block or cover these openings.
Do not place the unit in an enclosure unless proper
ventilation is provided, or the manufacturer's instructions
have been adhered to.
4. Water - Do not use this unit near water, for example near a
bathtub, washbowl, sink, laundry basket, in a damp or wet
basement, near a swimming pool, in an outdoor
installation, or in any area classified as a wet location. To
reduce the risk of fire or electrical shock, do not expose
this unit to rain or moisture.
5. Object and liquid entry - Never push objects of any kind
into this unit through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electrical shock. Never spill liquid of any
kind on the unit. Do not place objects filled with liquids,
such as vases or cups, on the unit.
6. Lightning - For added protection during a lightning storm,
or when leaving this unit unattended and unused for long
periods, unplug the unit from the wall outlet and
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
6
en | Safety
Small Size LCD/LED Monitors
disconnect the cable system. This will prevent damage to
the unit from lightning and power line surges.
7. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit. Use of
controls or adjustments, or performance of procedures
other than those specified, may result in hazardous
radiation exposure.
8. Overloading - Do not overload outlets and extension cords.
This can cause fire or electrical shock.
9. Power cord and plug protection - Protect the plug and
power cord from foot traffic, being pinched by items
placed upon or against them at electrical outlets, and its
exit from the unit.
10. Power disconnect - Units have power supplied to the unit
whenever the power cord is inserted into the power
source. The power cord is the main power disconnect
device for switching off the voltage for all units.
11. Power sources - Operate the unit only from the type of
power source indicated on the label. Before proceeding,
be sure to disconnect the power from the cable to be
installed into the unit.
–
–
–
For battery powered units, refer to the operating
instructions.
For external power supplied units, use only the
recommended or approved power supplies.
For limited power source units, this power source
must comply with EN60950. Substitutions may
damage the unit or cause fire or shock.
If unsure of the type of power supply to use, contact
your dealer or local power company.
–
12. Servicing - Do not attempt to service this unit yourself.
Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
13. Damage requiring service - Unplug the unit from the main
AC power source and refer servicing to qualified service
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Safety | en
7
personnel when any damage to the equipment has
occurred, such as:
–
–
the power supply cord or plug is damaged;
exposure to moisture, water, and/or inclement
weather (rain, snow, etc.);
–
–
–
–
–
liquid has been spilled in or on the equipment;
an object has fallen into the unit;
unit has been dropped or the unit cabinet is damaged;
unit exhibits a distinct change in performance;
unit does not operate normally when the user
correctly follows the operating instructions.
14. Replacement parts - Be sure the service technician uses
replacement parts specified by the manufacturer, or that
have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical
shock, or other hazards.
15. Safety check - Safety checks should be performed upon
completion of service or repairs to the unit to ensure
proper operating condition.
16. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
17. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
8
en | Safety
Small Size LCD/LED Monitors
1.2
Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as “Dangerous Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
1.3
Important notices
Accessories - Do not place this unit on an unstable stand,
tripod, bracket, or mount. The unit may fall, causing serious
injury and/or serious damage to the unit. Use only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer. When a cart is used, use caution and care when
moving the cart/apparatus combination to avoid injury from
tip-over. Quick stops, excessive force, or uneven surfaces may
cause the cart/unit combination to overturn. Mount the unit
per the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch,
with a contact separation of at least 3 mm in each pole, into the
electrical installation of the building.If it is needed to open the
housing for servicing and/or other activities, use this all-pole
switch as the main disconnect device for switching off the
voltage to the unit.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Safety | en
9
Coax grounding:
–
Ground the cable system if connecting an outside cable
system to the unit.
–
Connect outdoor equipment to the unit's inputs only after
this unit has had its grounding plug connected to a
grounded outlet or its ground terminal is properly
connected to a ground source.
–
–
Disconnect the unit's input connectors from outdoor
equipment before disconnecting the grounding plug or
grounding terminal.
Follow proper safety precautions such as grounding for
any outdoor device connected to this unit.
U.S.A. models only - Section 810 of the National Electrical Code,
ANSI/NFPA No.70, provides information regarding proper
grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors,
location of discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that electronic
and electrical appliances, which have reached the end of their
working life, must be collected and disposed of separately
from household waste material. Separate collecting systems
are usually in place for disused electronic and electrical
products. Please dispose of these units at an environmentally
compatible recycling facility, per European Directive 2002/96/
EC
Electronic Surveillance - This device is intended for use in
public areas only. U.S. federal law strictly prohibits
surreptitious recording of oral communications.
Environmental statement - Bosch has a strong commitment
towards the environment. This unit has been designed to
respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET
handling precautions to avoid electrostatic discharge.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
10 en | Safety
Small Size LCD/LED Monitors
NOTE: Wear required grounded wrist straps and observe proper
ESD safety precautions when handling the electrostatic-
sensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch
circuit protection must be secured with a maximum fuse rating
of 16A. This must be in accordance with NEC800 (CEC Section
60).
Grounding and polarization - This unit may be equipped with a
polarized alternating current line plug (a plug with one blade
wider than the other blade). This safety feature allows the plug
to fit into the power outlet in only one way. If unable to insert
the plug fully into the outlet, contact a locally certified
electrician to replace the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-pole grounding
plug (a plug with a third pin for earth grounding). This safety
feature allows the plug to fit into a grounded power outlet only.
If unable to insert the plug into the outlet, contact a locally
certified electrician to replace the obsolete outlet. Do not
defeat the safety purpose of the grounding plug.
Moving - Disconnect the power before moving the unit. Move
the unit with care. Excessive force or shock may damage the
unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially
regarding clearance from power and lightning conductors and
transient protection, must be in accordance with NEC725 and
NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily
accessible disconnect device in the building installation wiring.
Pluggable equipment - Install the socket outlet near the
equipment so it is easily accessible.
Power resupply - If the unit is forced to power down due to
exceeding the specified operating temperatures, disconnect
the power cord, wait for at least 30 seconds, and then
reconnect the power cord.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Safety | en 11
Power lines - Do not locate the display near overhead power
lines, power circuits, or electrical lights, nor where it may
contact such power lines, circuits, or lights.
Rack-mount
–
Ventilation - Do not place this unit in a built-in installation
or rack without proper ventilation or adhering to the
manufacturer's instructions. The equipment must not
exceed its maximum operating temperature requirements.
Mechanical loading - Properly mount the equipment in a
rack to prevent a hazardous condition due to uneven
mechanical loading.
–
SELV
All the input/output ports are Safety Extra Low Voltage (SELV)
circuits. SELV circuits should only be connected to other SELV
circuits.
Because the ISDN circuits are treated like telephone-network
voltage, avoid connecting the SELV circuit to the Telephone
Network Voltage (TNV) circuits.
System ground/Safety ground
The system ground is only used to comply with safety standards
or installation practices in certain countries. Bosch does not
recommend connecting system ground to safety ground unless
it is explicitly required. However, if the system ground and
safety ground are connected and grounding loops are causing
interference in the video signal, use an isolation transformer
(available separately from Bosch).
CAUTION!
Connecting System ground to Safety ground may result in
ground loops that can disrupt the CCTV system.
Video loss - Video loss is inherent to digital video recording;
therefore, Bosch Security Systems cannot be held liable for any
damage that results from missing video information. To
minimize the risk of lost digital information, Bosch Security
Systems recommends multiple, redundant recording systems,
and a procedure to back up all analog and digital information.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
12 en | Safety
Small Size LCD/LED Monitors
NOTICE!
This is a class A product. In a domestic environment this
product may cause radio interference, in which case the user
may be required to take adequate measures.
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following conditions:
–
this device may not cause harmful interference, and
this device must accept any interference received,
including interference that may cause undesired operation.
–
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and radiates
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his expense.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Safety | en 13
Informations FCC et ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Ce produit est conforme aux normes FCC partie 15. la mise en
service est soumises aux deux conditions suivantes :
–
cet appareil ne peut pas provoquer d'interférence nuisible
et
–
cet appareil doit pouvoir tolérer toutes les interférences
auxquelles il est soumit, y compris les interférences qui
pourraient influer sur son bon fonctionnement.
AVERTISSEMENT : Suite à différents tests, cet appareil s’est
révélé conforme aux exigences imposées aux appareils
numériques de Classe A en vertu de la section 15 du règlement
de la Commission fédérale des communications des États-Unis
(FCC). Ces contraintes sont destinées à fournir une protection
raisonnable contre les interférences nuisibles quand l'appareil
est utilisé dans une installation commerciale. Cette appareil
génère, utilise et émet de l'energie de fréquence radio, et peut,
en cas d'installation ou d'utilisation non conforme aux
instructions, générer des interférences nuisibles aux
communications radio. L’utilisation de ce produit dans une
zone résidentielle peut provoquer des interférences nuisibles.
Le cas échéant, l’utilisateur devra remédier à ces interférences
à ses propres frais.
Au besoin, l’utilisateur consultera son revendeur ou un
technicien qualifié en radio/télévision, qui procédera à une
opération corrective. La brochure suivante, publiée par la
Commission fédérale des communications (FCC), peut s’avérer
utile : How to Identify and Resolve Radio-TV Interference Problems
(Comment identifier et résoudre les problèmes d’interférences
de radio et de télévision). Cette brochure est disponible auprès
du U.S. Government Printing Office, Washington, DC 20402,
États-Unis, sous la référence n° 004-000-00345-4.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
14 en | Safety
Small Size LCD/LED Monitors
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed
Circuit Television Equipment, UL 2044. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Information
Technology Equipment, UL 60950-1. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and must be
treated accordingly.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Safety | en 15
NOTE!
This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the
user guide can change without notice. Bosch Security Systems
accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user
guide and the product described.
1.4
Customer Support and Service
If this unit needs service, contact the nearest Bosch Security
Systems Service Center for authorization to return and shipping
instructions.
Service Centers
USA
Repair Center-
Telephone: 800-566-2283
Fax: 800-366-1329
E-mail: [email protected]
Customer Service
Telephone: 888-289-0096
Fax: 585-223-9180
E-mail: [email protected]
Technical Support
Telephone: 800-326-1450
Fax: 585-223-3508 or 717-735-6560
E-mail: [email protected]
Canada
Telephone: 514-738-2434
Fax: 514-738-8480
Europe, Middle East, Africa Region
Repair Center
Telephone: 31 (0) 76-5721500
Fax: 31 (0) 76-5721413
E-mail: [email protected]
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
16 en | Safety
Small Size LCD/LED Monitors
Asia Region
Repair Center
Telephone: 65 63522776
Fax: 65 63521776
E-mail: [email protected]
Customer Service
Telephone: 86 (0) 756 7633117 or
86 (0) 756 7633121
Fax: 86 (0) 756 7631710
E-mail: [email protected]
Warranty and more information
For additional information and warranty queries, please contact
your Bosch Security Systems representative or visit our website
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Unpacking | en 17
2
Unpacking
This equipment should be unpacked and handled with care. If
an item appears to have been damaged in shipment, notify the
shipper immediately.
Verify that all the parts listed in the Parts List below are
included. If any items are missing, notify your Bosch Security
Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to
transport the unit and must be used if returning the unit for
service. Save it for possible future use.
2.1
Parts List
Quantity Description
1
1
Color LCD Flat Panel Monitor
Installation Manual (printed booklet, English
version)
1
2
Installation manual (CD-ROM, multi-language
version)
Power Cords, 3-wire with grounded plug 1.8 m (6 ft)
long: one with a U.S plug type and one with a
European Continental plug type
VGA to VGA (D-Sub) cable, 1.5 m (5 ft)
Trigger cable
1
1
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
18 en | Exploded View
Small Size LCD/LED Monitors
3
Exploded View
Figure 3.1 Front Panel
Ref. Button
Description
1
2
Speaker
Input
Generate sounds from the input audio signal.
Selects the signal to be displayed.
Serves as the “Enter” function for OSD menus.
Selects the on-screen display (OSD).
Adjusts the value when in the Scrolls up in the OSD.
3
4
Menu
OSD.
5
Adjusts the value when in the Scrolls down in the
OSD or auto adjusts when in OSD.
PC mode.
6
7
Decreases the value when in Scrolls left in the OSD.
the OSD.
Increases the value when in
Scrolls right in the
OSD.
the OSD.
8
9
Power
Display Power (On/Off)
LED Indicator Power On (green)
Power Off, Standby (red)
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Exploded View | en 19
Figure 3.2 Rear Panel (UML-080-90, UML-082-90)
Ref Connector
Ref Connector
1
2
3
4
5
6
Audio In (for external audio)
AV1 In
AV1 Out
AV2 In
AV2 Out
VGA In
7
8
9
S-Video In
12 VDC In
Adjustable Stand
10 Trigger Input
11 RS-232 In (for firmware update)
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
20 en | Exploded View
Small Size LCD/LED Monitors
Figure 3.3 Rear Panel (UML-100-90, UML-102-90)
Ref Connector
Ref Connector
1
2
3
4
5
6
Audio In (for external audio)
AV1 In
AV1 Out
AV2 In
AV2 Out
VGA In
7
8
9
S-Video In
12 VDC In
Adjustable Stand
10 Trigger Input
11 RS-232 In (for firmware update)
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Description | en 21
4
Description
The Bosch line of High Performance LCD/LED monitors are
highly reliable display devices that combines the flexibility of
signal connectivity and ease of operation. With the AV, Y/C (S-
Video) and VGA terminals you can connect this monitor to a
variety of devices like CCTV video cameras or a PC. The trigger
signal input function allows you to implement the trigger
warning mechanism easily with compatible CCTV video
cameras. The multi-language On-screen Display (OSD) menu
system provides an intuitive and convenient interface where
you can easily change the settings of this monitor. An
adjustable stand is provided so you can easily adjust the angle
of the screen display when this monitor is placed on a table.
Alternatively you can also wall-mount this monitor using the
mounting screw holes on the rear panel of the monitor and a
suitable wall mounting bracket.
4.1
Features
–
8.4-in. and 10.4-in. models
–
LED backlight models (UML-082-90, UML-102- 90) or CCFL
models (UML-080-90, UML-100-90)
NTSC/PAL Auto-Detect
–
–
VGA Input
–
–
–
640 x 480
800 x 600
1024 x 768
–
–
–
–
Composite Video Input
Y/C Input (S-Video)
Trigger input
Multi-language On-screen Display (OSD)
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
22 en | Description
Small Size LCD/LED Monitors
4.2
Power
Model No.
Rated Voltage Voltage
Range
Power at Rated Sync Format
Voltage
UML-080-90 120/230 VAC
100 to 240 V < 35 W
NTSC/PAL
NTSC/PAL
NTSC/PAL
NTSC/PAL
50/60 Hz
UML-100-90 120/230 VAC
100 to 240 V < 35 W
100 to 240 V < 35 W
100 to 240 V < 35 W
50/60 Hz
UML-082-90 120/230 VAC
50/60 Hz
UML-102-90 120/230 VAC
50/60 Hz
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Installing the Monitor | en 23
5
Installing the Monitor
This chapter outlines the procedures to install the UML-080-90,
UML-100-90, UML-082-90 or the UML-102-90 Monitor. A
qualified service person should install the monitor and adhere
to all local codes.
5.1
5.2
Ventilation
To prevent overheating, ensure that the ventilation openings on
the rear of the monitor are not covered.
Mounting the Monitor
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-
90 are designed for use on a desktop or mounted to a wall or
rack.
5.2.1
Desktop Installation
The Bosch High Performance monitors are delivered with a 3-
pole US-style power cord and a 3-pole Euro-style power cord.
Use the US-style power cord where 120 VAC, 60 Hz power is
available; use the Euro-style power cord where 230 VAC, 50 Hz
power is available. The monitor automatically adjusts to either
power input voltage. The viewing angle of the LCD can be
adjusted to fit the most comfortable monitoring status.
Figure 5.1 Maximum degree = 35°
NOTICE!
The suggested bracket angle for the best viewing quality and
holding support is between 25° to 35°.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
24 en | Installing the Monitor
Small Size LCD/LED Monitors
5.2.2
Wall Mount Installation
This monitor can be wall-mounted using the square mounting
holes (75 mm [2.95 in.] centers) and a suitable wall mount or
swivel/tilt mount.
Figure 5.2 Location of mounting holes
5.3
Connecting the Composite Video Signal to
the Monitor
There are two (2) BNC connectors located on the rear side
panel of the monitor for composite video inputs and two (2)
BNC connectors for composite video outputs (see Figure 3.2
and Figure 3.3).
Note: All video inputs are passive loop-through. The impedance
is automatically set to 75 Ohm by the input of the signal on the
input connector, while operating in a single connection mode
(see Figure 5.5). If a cable is also connected to the output
connector, the video signal can be passed on to another
monitor connected to it via the passive loop-through function.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Installing the Monitor | en 25
Up to three (3) monitors may be connected in this manner (see
Figure 5.6).
Note: To select between AV1 and AV2, press Input (see
Figure 3.1, Item 2) located on the front of the monitor.
5.4
Connecting the Y/C (S-Video) Signal to the
Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C)
input (see Figure 3.2 and Figure 3.3) on the rear side panel.
Note: Both Y and C inputs are terminated with 75 Ohm.
Figure 5.3 Y/C Connector pin-out
Number Input
1
2
3
4
Ground
Ground
Y-signal
C-signal
5.5
Connecting Audio to the Monitor
There is one (1) set of stereo audio connectors for audio input,
located on the rear panel.
This audio input is not associated with any input terminals on
the rear panel, and can be freely connected to any audio input.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
26 en | Installing the Monitor
Small Size LCD/LED Monitors
5.6
Connecting the PC Signal to the Monitor
You can connect a PC signal to the monitor using the VGA
connector on the rear panel and a VGA cable (D-SUB to D-SUB).
Figure 5.4 VGA Input
Pin Description
Pin Description
Pin Description
11 Ground
12 SDA (for DDC)
13 H-Sync or H+V Sync
14 V-Sync
1
2
3
4
5
Red Video
Green Video
Blue Video
Ground
6
7
8
9
Red Ground
Green Ground
Blue Ground
N/A
Ground
10 Signal Cable Detect 15 SCL (for DDC)
5.7
Single / Multiple Monitor Configuration
Figure 5.5 Single Monitor Configuration
Ref Description
Ref Description
1
2
Video Camera 3
AV1 In
AV1 Out
DVR
4
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Installing the Monitor | en 27
Figure 5.6 Multiple Monitor Configuration
Ref Description
1
2
3
Video Camera
AV1 In
AV1 Out
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
28 en | Navigating the Monitor
Small Size LCD/LED Monitors
6
Navigating the Monitor
6.1
Navigating the Front Panel
Use the front panel to make any necessary OSD adjustments to
the UML-080-90, UML-100-90, UML-082-90 or the UML-102-90.
See the figure below for an explanation of the front panel.
Figure 6.1 Front Panel Buttons
Ref. Button
Description
1
2
Speaker
Input
Generate sounds from the input audio signal.
Selects the signal to be displayed.
Serves as the “Enter” function for OSD menus.
Selects the on-screen display (OSD).
Adjusts the value when in the Scrolls up in the OSD.
3
4
Menu
OSD.
5
Adjusts the value when in the Scrolls down in the
OSD or auto adjusts when in OSD.
PC mode.
6
7
Decreases the value when in Scrolls left in the OSD.
the OSD.
Increases the value when in
Scrolls right in the
OSD.
the OSD.
8
9
Power
Display Power (On/Off)
LED Indicator Power On (green)
Power Off, Standby (red)
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Navigating the Monitor | en 29
6.2
Navigating the Monitor On-screen Display
(OSD)
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-
90 have two (2) modes: Video and PC. The LCD is programmed
through the on-screen display (OSD) menus and submenus
where an operator can select operating parameters. To access
the OSD menus, press the Menu button on the front panel. Use
the front panel of the monitor to make any necessary
adjustments to the OSD.
NOTICE!
When you are navigating through the OSD menus, use the Input
button to select a menu and use the Menu button to exit a
menu.
To navigate the set up menus, follow the steps below:
1. Connect the CVBS, S-Video or the VGA cable.
2. Press the Power button to turn on the unit (see
Figure 6.1).
3. If required, press the Input button and the
buttons until a signal is displayed.
and
4. Press the Menu button to activate the main menu
selections (see Figure 6.1).
5. Press the
6. Press the Input button to enter the selected menu.
7. Press the and buttons to select a sub-menu item.
8. Press the Input button to enter the selected sub-menu.
9. Press the and buttons to toggle the OSD values.
and
buttons to select a menu.
10. Press the Menu button to exit the selected menu and to
return to the menu bar or to confirm a selection.
11. Press the Menu button again to exit the OSD menu bar.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
30 en | Navigating the Monitor
Small Size LCD/LED Monitors
6.3
On-screen Display Menus
There are three (3) on-screen menus that allow you to
customize your settings. Press the Menu button to access the
OSD menu.
Icon
Menu
Custom
Function
Adjusts the Brightness, Contrast, Color, Tint and
the Sharpness level for video performance. (The
menu options differ between the Video and PC
modes.)
Picture/Sound Adjusts the Picture Mode, Color Tone, Mute,
Volume, Size, Overscan, DNR and the PC settings.
(The menu options differ between the Video and
PC modes.)
Setup
Enables user to Reset the factory default settings
and to adjust the Language, OSD Tone, Blue
Screen, Key Lock, Trigger and the Auto Switch
settings.
6.4
Custom Menu
To access the Custom menu, press the Menu button on the
front panel of the monitor. Next, press the Input button and
then press the up and down buttons to select a submenu. Press
the Input button to enter the submenu, and then press the up
and down buttons to change the values. When finished, press
the Menu button to save any changes, then press the Menu
button again to exit the OSD.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Navigating the Monitor | en 31
Custom
Brightness
Contrast
Color
Tint
Sharpness
50
50
50
50
50
:Move
:Input
:Menu
Table 6.1 Custom Menu (Video Mode)
Custom
Brightness
Contrast
50
50
:Move
:Input
:Menu
Table 6.2 Custom Menu (PC Mode)
Submenu
Definition
Brightness Adjusts the brightness level for video performance (range 0-100).
Contrast
Color
Tint
Adjusts the contrast level for video performance (range 0-100).
Adjusts the overall intensity of the screen (range 0-100).
Adjusts the tint of the picture (range 0-100). NTSC only.
Sharpness Adjusts the sharpness level for video performance (range 0-100).
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
32 en | Navigating the Monitor
Small Size LCD/LED Monitors
6.5
Picture/Sound Menu
To access the Picture / Sound menu, press the Menu button on
the front panel of the monitor, then press the up and down
buttons to select the Picture / Sound icon. Press the Input
button to enter the menu, and then press the up and down
buttons to select a submenu
Picture/Sound
Picture Mode
Color Tone
Mute
Standard
6500°K
Off
Volume
Size
20
4:3
Overscan
DNR
3D Comb
On
On
:Move
:Input
:Menu
Table 6.3 Picture/Sound Menu (Video Mode)
Picture/Sound
Picture Mode
Color Tone
Mute
Standard
6500°K
Off
Volume
PC
20
:Move
:Input
:Menu
Table 6.4 Picture/Sound Menu (PC Mode)
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Navigating the Monitor | en 33
Submenu
Definition
Picture Mode
(Video Mode)
Selects the automatic picture control mode. Choices are:
Custom: User selected values of the Custom menu are applied.
Dynamic: Automatically adjusts the Brightness, Contrast, and
Sharpness, maximizing the video quality in the picture.
Standard: Applies factory default values.
Picture Mode
(PC Mode)
Selects the automatic picture control mode. Choices are Custom, High,
Middle and Low.
Color Tone
Selects the color temperature. Choices are: 6500°K, 7500°K and
9300°K.
Mute
Enables/disables audio. Choices are: On and Off.
Volume
Controls built-in speaker output volume (range 1-9).
Size (Video
Mode)
Selects the Aspect Ratio Control mode. Choices are: 4:3, Panorama,
Zoom1 and Zoom2.
Overscan
Adjusts the overscan settings when displaying video (non-PC) signals:
H-Overscan: Adjusts the horizontal overscan size (range 1-9).
V-Overscan: Adjusts the vertical overscan size (range 1-9).
H-Phase: Adjusts the horizontal phase of the overscanned picture
(range 1-9).
(Vide Mode)
V-Phase: Adjusts the vertical phase of the overscanned picture (range
1-9).
DNR (Video
Mode)
Turns Noise Reduction On or Off. Turning this feature OFF reduces the
video quality slightly, but improves the monitors response time to
MOTION.
PC (PC Mode)
Selects between Auto or manual adjustment of the desktop screen. Auto
Adjust: Auto synchronizes screen to graphics adaptor.
Manual choices are: Phase (range 0-100), H-Phase (range 0-100), V-
Phase (range 0-100) and Frequency (range 0-100).
3D Comb
Enables or disables the 3D comb filter.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
34 en | Navigating the Monitor
Small Size LCD/LED Monitors
6.6
Setup Menu
To access the Setup menu, press the Menu button on the front
panel of the monitor, then press the up and down buttons to
select the Setup icon. Press the Input button to enter the menu,
and then press the up and down buttons to select a submenu.
Setup
Reset
Language
English
On
Off
OSD Tone
Blue Screen
Key Lock
Off
Trigger
Auto Switch
Firmware Version
X.X
:Move
:Input
:Menu
Table 6.5 Setup Menu
Submenu
Reset
Definition
Restores default settings.
Language
Adjusts the language of the OSD. Choices are: Chinese, Dutch,
English, French, German, Italian, Polish, Portuguese, Russian, and
Spanish.
OSD Tones
Blue Screen
Selects the type of background for the OSD menu. Choices are:
Transparency and On.
Enables or disables video loss indication. Choices are:
On: displays a blue background when video loss is detected.
Off: displays a black backgound when video loss is detected.
Key Lock
Enables or disables the Key Lock function.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Navigating the Monitor | en 35
Trigger
Enables or disables the Trigger function, and configures the trigger
settings when enabled:
Trigger Enable: Turns the Trigger function On of Off.
Trigger Input: Selects the input signal source to display when a
trigger signal is received.
Buzzer: Turns the trigger buzzer tone On or Off.
Trigger Time: Sets the time duration the trigger input (as set by the
Trigger Input function) is displayed. Once the time expires, the
monitor will automatically switch back to the last viewed input.
Trigger Option: sets the trigger signal type to N/C (normal closed),
N/O (normal opened), High (2~5V) or Low (0~0.6V).
Auto Switching
Enables or disables the auto switch function that allows the monitor
to automatically switch to and display an available input signal.
Firmware Version Displays the release level of the monitor firmware.
NOTICE!
When key lock is enabled through the front panel, use the front
panel buttons to disable the key lock command. To disable the
key lock feature using the front panel buttons, press and hold
both the Input and the Menu buttons until the monitor displays
the Key Unlocked message.
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
36 en | Power Management
Small Size LCD/LED Monitors
7
Power Management
These monitors feature a power management system to “power
down” upon receipt of the display power management signaling
(DPMS) from a DPMS video card.
The DPMS-compliant video card performs this signaling by not
sending a horizontal, vertical, or a sync signal.
The monitor enters an appropriate mode through identifying
each of the three (3) modes of the signaling system.
7.1
7.2
Power Consumption
Mode
Power Consumption
ON
STANDBY
ACTIVE OFF
35 W
2 W
1 W
LED Indicator
The power management feature of the monitor is comprised of
these stages:
Mode
LED Color
Monitor Operation
ON
Green
Normal Operation
STANDBY
ACTIVE OFF
Flashes Red Screen blanks after idle time and
some electronic circuits or all
circuitry in the monitor shuts down.
UNSUPPORTED MODE Green
Normal operation but the screen
displays an error message.
Not Operational
POWER OFF
Red
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Troubleshooting | en 37
8
Troubleshooting
Problem
Solution
No image displayed on screen –
Check that the power cord of the monitor is
securely connected into the wall outlet or grounded
extension cable or strip.
–
–
Power switch should be in the ON position and the
LED lit.
Check that the Brightness and/or Contrast
adjustments of the display have not been turned
down to minimum levels.
The message "No Signal" is
displayed
–
–
The signal cable should be completely connected to
the video card/computer.
The video card should be completely seated in its
slot and the computer switched ON.
Display image is not
Push the down key to activate the Auto Adjust function.
- or -
centered, is too small or too
large in the PC mode
Adjust the Frequency and Phase in the PC OSD submenu.
Vertical or horizontal noise is Push the down key to activate the Auto Adjust function.
present in the picture
- or -
Adjust the Frequency and Phase in the PC OSD submenu.
Select 6500°K, 7500°K or 9300°K in the Color Tone menu.
Incorrect colors
- or -
Use the Reset function to reset to the default settings.
PC is operating with either a resolution or timing mode
that is not supported by the monitor. Change the PC
The error message “Out of
Range” is displayed
timing mode to one of the valid combinations below:
–
–
–
640 x 480; 60/72/75 Hz
800 x 600; 60/72/75 Hz
1024 x 768; 60/70/75 Hz
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
38 en | Maintenance
Small Size LCD/LED Monitors
9
Maintenance
To clean the LCD panel, wipe off water droplets or oil
immediately with absorbent cotton or a soft lint-free cloth.
Staining and discoloration may occur if left on the panel for
long periods. If the surface (polarizer) of the LCD panel is dirty
or stained, use absorbent cotton or a soft lint-free cloth to
remove the residue as follows:
1. Turn off the display and disconnect it from the power
supply.
2. Do not spray any liquid directly on the screen. Dampen a
clean, soft, lint-free cloth with water only (using a paper
towel or dirty cloth can scratch the screen).
3. Gently wipe the screen starting from the top of the screen
to bottom wiping in a downward motion. Be careful not to
press too hard to avoid damaging the screen.
4. To avoid streaking, wipe the screen again with another
clean, dry, lint-free cloth.
NOTICE!
If water does not work, use a mild cleaner labeled for use with
LCD panels, available at office supply stores.
Do not use any of the following as a cleaning agent:
–
–
–
–
–
–
Ketone type materials
Ethyl alcohol
Ethyl acid
Toluene
Methyl chloride
Ammonia
Use of these materials may permanently damage the polarizer
due to a chemical reaction.
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Small Size LCD/LED Monitors
Technical Specifications | en 39
10
Technical Specifications
10.1
UML-080-90/UML-100-90
Model
UML-080-90
UML-100-90
LCD Specifications
LCD Type
8.4 in. Digital LCD
CCFL
10.4 in. Digital LCD
CCFL
Backlight Type
Pixel Pitch (H x V)
Brightness
0.213 x 0.213 mm
0.264 x 0.264 mm
2
2
250 cd/m (typical)
230 cd/m (typical)
Contrast Ratio
Response Time
Resolution (H x V)
Frequency
600:1 (typical)
10 ms (typical)
800 x 600
500:1 (typical)
20 ms (typical)
800 x 600
Horizontal: 31 - 48 KHz
Horizontal: 31 - 48 KHz
Vertical: 56 - 75 Hz
Vertical: 56 - 75 Hz
Input Signal
Video (BNC 2ch input 1.0 Vp-p, 75 Ohm terminated, loop-
through out)
S-Video (Mini Din 4-pin 1ch input (Y/C))
Audio In (L/R)
Trigger In
Active Display Area (H x V) 170.4 x 127.8 mm
211.2 x 158.4 mm
Packing Dimensions
503 x 349 x 343 mm
503 x 349 x 343 mm
(19.8 x 13.7 x 13.5 in.)
1.16 kg (2.56 lb)
12 VDC, 2.5 A
(19.8 x 13.7 x 13.5 in.)
1.53kg (3.37 lb)
12 VDC, 2.5 A
Weight
Electric Ratings
Bosch Security Systems, Inc.
User Manual
F.01U.134.499 | 1.0 | 2009.07
Download from Www.Somanuals.com. All Manuals Search And Download.
40 en | Technical Specifications
Small Size LCD/LED Monitors
10.2
UML-082-90/UML-102-90
Model
UML-082-90
UML-102-90
LCD Specifications
LCD Type
8.4 in. Digital LCD
LED
10.4 in. Digital LCD
LED
Backlight Type
Pixel Pitch (H x V)
Brightness
0.213 x 0.213 mm
0.264 x 0.264 mm
2
2
450 cd/m (typical)
400 cd/m (typical)
Contrast Ratio
Response Time
Resolution (H x V)
Frequency
600:1 (typical)
10 ms (typical)
800 x 600
700:1 (typical)
20 ms (typical)
800 x 600
Horizontal: 31 - 48 KHz
Horizontal: 31 - 48 KHz
Vertical: 56 - 75 Hz
Vertical: 56 - 75 Hz
Input Signal
Video (BNC 2ch input 1.0 Vp-p, 75 Ohm terminated, loop-
through out)
S-Video (Mini Din 4-pin 1ch input (Y/C))
Audio In (L/R)
Trigger In
Active Display Area (H x V) 170.4 x 127.8 mm
211.2 x 158.4 mm
Packing Dimensions
503 x 349 x 343 mm
503 x 349 x 343 mm
(19.8 x 13.7 x 13.5 in.)
1.20 kg (2.65 lb)
12 VDC, 2.5 A
(19.8 x 13.7 x 13.5 in.)
1.59 kg (3.51 lb)
12 VDC, 2.5 A
Weight
Electric Ratings
F.01U.134.499 | 1.0 | 2009.07
User Manual
Bosch Security Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601
U.S.A.
Telephone +1 800-566-2283
Fax
+1 800-366-1329
© Bosch Security Systems, Inc., 2009, Data subject to change.
Download from Www.Somanuals.com. All Manuals Search And Download.
|