Output Connections
The DCM290P provides separate stereo
outputs via analog RCA connectors and
digital optical and coaxial connectors.
MULTI-DISC CD PLAYER
5-Disc
MP3/WMA Decoders
CD Player
MP3/WMA decoders play finalized CD-
R/RW discs containing MP3 or WMA
audio files. A single CD-R/RW disc can
contain up to 10 times more tracks than an
ordinary audio CD. Installations requiring
long-play background music are excellent
applications for CD-R/RW discs contain-
ing a large number of MP3 files.
DCM290P*
This 5-Disc CD Player is capable of loading and removing discs without
interrupting play. Plays audio CDs as well as CD-R/RW discs with MP3
and WMA files. A rack mounting kit is included.
Playback Modes
Audio track selection can be configured in
a variety of ways for playback. Tracks can
be played back sequentially or randomly,
manually or programmed (up to 32 tracks)
from any one or up to five loaded discs.
Random playback functions include ran-
dom playback of tracks from one, all or
programmed tracks from the loaded discs.
Once all tracks are played back in random
order, "repeat playback" plays back the
same selected tracks in a different random
order.
Product Features:
• 3-mode random playback (full random,
program random, disc sequential random)
• 5-Disc CD changer
• Load or remove discs without
interrupting play mode
• Includes rack mount kit (3 rack spaces)
• UL and C-UL listed
• Stereo output via analog RCA jacks
and digital output via coaxial and
optical jacks
Power Requirements:
Dimensions:
120V AC
• Program up to 32 tracks from up to
five separate discs
• MP3 and WMA decoders
• Infrared remote control
17-1/8" W x 4-3/4" H x 15-3/4" D
(without Rack Kit)
Product Weight:
13 lb.
Intelligent Disc Scan
When using the remote control, the disc
skip button rotates the carousel tray
clockwise or counterclockwise when
searching for a disc for faster playback.
*This product is not covered by Bogen Limited Warranty. Please contact
Customer Service for warranty information on this product.
Antenna Connections
Anyone who has installed a tuner inside
an industrial building knows that radio
signals don’t penetrate too far into these
steel-laced structures. Because the
TP30D is designed for industrial instal-
lations, it contains inputs for both exter-
nal 300-ohm (twin line) and 75-ohm
(coaxial) antenna feeds. The 75-ohm
input uses an “f” connector and is ideal
for receiving feeds from antenna distri-
bution systems or cable systems. For
convenience, the TP30D also provides a
built-in antenna that uses the AC line
cord as its antenna for those situations
that are less demanding.
AM/FM TUNER
TP30D
The TP30D is a compact, commercial-grade AM/FM tuner for background music
applications. The 18 FM and 12 AM station presets can be automatically scanned
to make finding a desired station quick and easy. Stations are tuned using
push-button controls and the backlit LCD display.
Product Features:
• Provides background music on paging
systems and MOH for telephone systems
• PLL-synthesized tuning for drift-free
operation
• 75-ohm and 300-ohm antenna connectors
• Includes FM dipole antenna and AM loop
• Heavy-duty, commercial-grade construction
• Rack-mountable (1 rack space) with an
accessory mounting kit
• Push-button controls
• Large, easy-to-read backlit LCD station
frequency display (orange)
• 18 FM and 12 AM station presets
• Automatic scanning of station presets
• Stereo or mono operation
• Excellent sensitivity, image rejection
and frequency response
• Precise tuning and superior signal quality
• Low hum, low noise, low distortion
• Output cables included
• UL and C-UL listed
Whether sitting on a shelf or mounted in
a rack, the TP30D is a great choice for an
industrial-grade tuner.
Accessories
RPK46A
Power Requirements:
Dimensions:
120V AC
10-1/2" W x 1-5/8" H x 7-1/8" D
Rack Mount
Kit
Product Weight:
6 lb.
Download from Www.Somanuals.com. All Manuals Search And Download.
Space Saving
CD PLAYER & AM/FM RECEIVER
CDR1
The CDR1 is an excellent choice for sup-
plying background music to a paging
system. It incorporates a full-featured
receiver and CD player in an extremely
compact size. When rack-mounted using
the optional mounting kit, the CDR1 fits
in 2 rack spaces.
The CDR1 is a combination
CD Player and AM/FM Receiver,
providing reliable, economic
background music for sound systems.
Dual Outputs
Product Features:
A unique feature of the CDR1 is its dual
outputs. Since it is designed for paging
systems, a set of signal level RCA outputs
is available on the rear of the unit. These
outputs can feed the music or AUX inputs
of a paging system directly. But the CDR1
also contains a pair of 1-watt outputs that
can drive 8-ohm speakers directly.These
outputs provide a convenient way to sup-
ply local music or to monitor the receiver
tuning, without the need to run paging
speakers into the equipment room.
• Single Disc CD Player & AM/FM Receiver
• Stereo & Mono signal out
• 1W minimum, @ 8-ohms stereo output
Power Requirements:
Dimensions:
12V DC/3A
• Adjustable loudness contour
• 12- or 24-hour time display
• AUX input via 1/8" stereo jack
• Pluggable screw terminal connector
for antenna & speaker wiring
• Rack-mountable (2 rack spaces)
w/accessory mounting kit
• External power supply (UL and C-UL listed) included
7-1/4" W x 2-1/8" H x 9-1/4" D
4 lb.
Product Weight:
CD Player: •Plays CD, CD-R, and CD-RW discs
• Browse, Repeat, Random Play, and Pause functions
Accessories
RK78
Receiver: •30 Station presets: 5 selectable bands (3 FM and 2 AM)
can be programmed with 6 stations each
Rack
Mount Kit
•Manual Tuner, Auto Seek, and Preset Scan features
•Pluggable screw terminal inputs for AM loop and FM dipole antennas
•F-Type connector for coaxial 75-ohm antenna
Commercial Sound Use
FM RADIO RECEIVER
FMR
The FMR is an advanced commercial music
source. It may be housed in a compact and
familiar package, but this is no simple tran-
sistor radio. It has two types of outputs.The
line output is designed to interface with
any AUX input, and the 1-watt output has
enough power to supply even older tele-
phone systems’ music-on-hold inputs.
They both have level controls so you can
use them simultaneously. The FMR also has
a tone control to further shape the sound.
This economical FM Radio Receiver provides
background music (BGM) to paging systems
or music-on-hold (MOH) to telephone systems.
Another feature that makes the FMR
unique is its external antenna connec-
tions. The built-in telescoping antenna is
convenient, but radio signals don’t pene-
trate very far into most industrial build-
ings. Connect the FMR’s external antenna
terminals to a roof antenna or RF distri-
bution feed for crystal-clear reception.
Product Features:
• Automatic Frequency Control prevents signal drift
• LED indicator illuminates when the signal is strongest
• 1W output for MOH to telephone systems
• Line-level output for background music to paging systems
• Connects to a variety of telephone and paging systems
including self-amplified speaker systems
• Built-in monitor speaker makes tuning easy
• Telescoping antenna built-in or
connect to an external antenna
• Volume and tone controls
• Wall-mountable
Accessories
PRS40C
Power Requirements: 12V or 24V DC power supply
(not included)
Dimensions:
3-3/8" W x 6" H x 1-1/2" D
1 lb.
Power Supply
(12V DC)
Product Weight:
Download from Www.Somanuals.com. All Manuals Search And Download.
MICROPHONES
Bogen's microphone line includes a variety of types and styles (handheld, wireless handheld/lavaliere, desktop, gooseneck, boundary,
and overhead hanging) to meet your application needs, from paging systems to instrument and vocal reproduction. These
microphones provide clear, natural, intelligible sound reproduction with accurate response and dependable performance.
WIRELESS SYSTEMS
UHF Wireless Microphone Systems
UDMS16HH
• UHT16 Handheld Mic
• UDR16 UHF Receiver
includes:
UDMS16HH, UDMS16BP
These Wireless Microphone Systems offer users the freedom to
move around while speaking. System choices consist of a 16-channel
PLL-synthesized UHF Receiver with either a handheld microphone
or lavaliere microphone and body-pack transmitter.
UHT16 Handheld Microphone
•Sleek metal housing with internal antenna
UDR16
for optimum aesthetics and durable long life
•Uni-directional neodymium dynamic cartridge
for optimum sound, maximum feedback rejection,
and minimal handling noise
• Audio mute switch allows convenient audio muting while
UHT16
leaving the transmitter "ON"
• LED indicator: Unit "ON", and "Low Battery Alert"
• Convenient, economical operation with AA alkaline
UDMS16BP
or NiMH batteries (2x)
includes:
• Mic clip available (model MC28)
•
2" dia. x 9-1/8" long; 10 oz.
• UBP16 Body-Pack
& Lavaliere Mic
UBP16 Body-Pack w/Lavaliere Microphone
• UDR16 UHF Receiver
• Audio mute switch allows convenient audio muting while
UBP16
leaving the transmitter "ON"
• LED indicator: Unit "ON", and "Low Battery Alert"
• Locking 3.5mm mini-jack provides secure connection for
removable microphone
• Convenient, economical operation with AAA alkaline
or NiMH batteries (2x)
•
2-1/4" W x 3-3/8" H x 1-1/8" D; 3 oz.
UDR16
UDR16 16-Channel PLL-Synthesized UHF Receiver
• Offers 16 user-selectable frequencies in UHF 470-510 MHz band;
120 dB dynamic range; operation up to 500 feet line-of-sight
Accessories
RPK89
• DigiTRU Diversity™ for maximum range and dropout protection,
full LED indicators, 1/4" unbalanced and XLR balanced outputs,
Tone Squelch™ for locking out potential interference, noiseless
transmitter ON/OFF switching, and level control for unbalanced output
• Half-rack receiver design with front panel dual antennas, powered
by wall power adapter
Rack Mount
(Single Unit)
BCHM
Headset
Microphone
RPK90
Rack Mount
(Double Unit)
•
8-1/8" W x 1-7/8" H x 5-1/2" D; 1 lb.
DESKTOPS
DDU250
MBS1000A
Dynamic Desktop Microphone
Desktop Paging Microphone
The DDU250 is a high-quality, dynamic, gooseneck desktop
microphone ideal for any PA system. The gooseneck permits
the user to adjust the microphone’s angle and height to suit
the user’s needs. 4-1/4" W x 18-1/4" H x 6-1/4" D; 3.5 lb.
The MBS1000A is a dynamic, dual-impedance,
desktop microphone designed for all industrial and
commercial public address and paging applications.
4-3/8" W x 9-3/8" H x 5-7/8" D; 1.25 lb.
• Cardioid pickup pattern
• Cardioid pickup pattern
• Locking mechanism with push-to-talk bar for
long announcements
• Push-to-talk or lift-to-talk operation
• Impedance: Hi-Z, 50k ohms; Lo-Z, 500 ohms
• Frequency response range of 45 Hz - 15 kHz
• Sensitivity: Lo-Z: -72 dB +/- 3 dB; Hi-Z: -52 dB +/- 3 dB
• Rubberized black finish with die cast base
• 4-conductor, 2-shielded cable included
• Push-to-lock and push-to-talk switches
• Excellent speech intelligibility with low ambient noise
• Effective feedback control
• 16" long, fully flexible gooseneck stalk shock-mounted to a heavy
zinc die cast base
• 10-ft. cable with external contact closure outputs for the talk switches
• 500-ohm Impedance
• Frequency response range of 100 Hz - 12 kHz
• Sensitivity of -76 dB +/- 3 dB
Download from Www.Somanuals.com. All Manuals Search And Download.
MICROPHONES
HANDHELDS
GOOSENECKS
GCU250
HDU250
Condenser Gooseneck
Microphone
Professional Handheld
Stage Microphone
1
The GCU250 is a high-performance, partially rigid, 15- ꢀ4" ad-
justable gooseneck condenser microphone capable of meeting
the stringent demands of today's conference and PA systems. It is
an intelligent choice for sound reinforcement applications. It has
an integral XLR male connector mounting base and requires a 9V-
52V DC phantom power source. Slim and compact, the GCU250
is designed to minimize intrusion between the user and the audi-
ence. 18-1/4" L x 3/4" dia.; 4 ounces.
The HDU250 is a dynamic microphone ideal for acoustically
demanding environments. It features a heavy zinc die cast case
with a rigid, low noise cable-mount system and a lockable silent
reed switch. 7" D x 2" dia.; 1 lb.
• Cardioid pickup pattern
• High-output design with excellent gain before feedback characteristics
• High sound pressure capability without distortion
• Low sensitivity to breath/pop noise
• Cardioid pickup pattern
• Clean, accurate vocal reproduction with low ambient noise
• Integral breath/wind filter
• 250-ohm Impedance
• Frequency response range of 50 Hz - 18 kHz
• Sensitivity of -65 dB +/- 3 dB
• Efficient shock-mount system prevents handling and
transmission noise
• High sensitivity Neodymium capsule
• 250-ohm Low-impedance
• Frequency response range of 50 Hz - 18 kHz
• Sensitivity of -72 dB +/- 3 dB
• Integral multi-layer breath/wind filter; includes mic clip
• Rubberized black finish; rugged, reliable construction
• Snap-on windscreen
• Durable all-metal case with non-glare black finish
GDU150
HDU150
Dynamic Gooseneck
Microphone
Handheld Stage
Microphone
The GDU150 is a dynamic, gooseneck microphone that features
a durable all-metal case with a non-glare black finish. It has a
10-1/4" long, fully flexible neck with an integral XLR mounting
base. 17" L x 1-1/4" dia.; 1 lb.
The HDU150 is an attractive, dynamic, all-purpose microphone ideally
suited for a wide variety of vocal and sound reinforcement applications.
6-1/2" D x 1-1/2" dia.; 1 lb.
• Cardioid pickup pattern
• Cardioid pickup pattern
• Outstanding speech intelligibility, feedback rejection,
and user sound isolation
• Wide dynamic range with high-end sparkle and minimum feedback
• Low sensitivity to breath and popping sounds
• Lockable, silent on/off reed switch
• 500-ohm Impedance
• Frequency response range of 70 Hz - 15 kHz
• Sensitivity of -70 dB +/- 3 dB
• Rubber shock-mount system for attenuation of handling & cable noise
• Rigid, low-noise cable-mount system
• Rubberized black finish; durable ball-shaped design; includes mic clip
• High sound pressure capability and low sensitivity
to breath/pop noise
• Superior shock-mount system to reject handling and
transmission noise
• Integral multi-layer breath/wind filter
• 500-ohm Impedance
• Frequency response range of 100 Hz - 12 kHz
• Sensitivity of -75 dB +/- 3 dB
• Silent push-on/push-off talk switch on base
• Rugged, reliable construction
HDO100
Address Microphone
The HDO100 is an attractive, dynamic microphone perfectly suited for
public address applications and instrument sound reproduction.
Handheld Public
MGN19
Industrial Gooseneck
Microphone
6
-1/2" D x 1-1/2" dia.; 1 lb.
• Omni-directional pickup pattern
The MGN19 is a dynamic, push-button activated
microphone designed for all industrial and commercial
public address and paging applications.
23-1/2" L x 1-1/4" dia.; 1.25 lb.
• Clean, clear reproduction with minimal ambient sound
• Low sensitivity to handling noise and stage vibrations
• Lockable, silent on/off reed switch
• 500-ohm Impedance
• Frequency response range of 70 Hz - 15 kHz
• Sensitivity of -72 dB +/- 3 dB
• Internal rubber shock isolation system
• Rugged, reliable construction; includes mic clip
• Rubberized black finish
• Omni-directional pickup pattern
• Rugged, reliable design for quality, long-term use
under strenuous handling conditions
• 400-ohm Impedance
• Frequency response range of 50 Hz - 12 kHz, w/ 2 kHz boost
• Sensitivity of -76 dB +/- 3 dB
• Push-to-talk switch on MIC housing
Accessories
More Microphone
Accessories
•
Chrome-plated screen & gooseneck with black Cycolac® housing
WSGCU250
Mic Windscreen
(for GCU250)
MC27
• 4-conductor, 2-shielded cable included
• 19" flexible neck with mounting flange
Mic Clip
(for HD Handhelds)
on Page 60
Download from Www.Somanuals.com. All Manuals Search And Download.
MICROPHONES
OVERHEAD
BOUNDARY
WCU250
SCU250
Professional Overhead
Hanging Microphone
Professional Boundary
Microphone
The WCU250 is a back electret condenser, professional mi-
crophone perfectly suited for picking up audio from large
groups. Because it can hang from the ceiling and is compact in
size, the WCU250 is very useful in minimizing visual
distraction for the performers and the audience alike,
and limits intrusion into the working space.
The SCU250 is an unobtrusive, surface-mount, boundary, condenser
microphone ideal for meeting rooms, conferences, and stage productions
where minimum visibility is ideal. It requires an external 9V - 52V DC
phantom power supply. 2-3/4" W x 3/4" H x 3-1/4" D; 1 lb.
The WCU250 cable is terminated by a mini-XLR (female). A mini-
XLR to standard XLR adapter (included) houses the pre-amplifier.
It requires an external 9V - 52V DC phantom power supply.
• Cardioid pickup pattern
• Full, rich reproduction of voice and music
• Low sensitivity to stage vibration and thumping noise
• Well-suited in capturing the sound source and immediate surroundings
• Excellent user sound isolation with excellent feedback rejection
• Phantom power operated
1-1/4" D x 1/2" dia.; 5 ounces.
• Cardioid pickup pattern
• 250-ohm Impedance
• Clear, crisp sound with outstanding ambient noise isolation
• Frequency response range of 20 Hz - 18 kHz
• Sensitivity of -58 dB +/- 3 dB
• Low-impedance balanced output
• Mounting keyways for hanging or for secure attachment to
the mounting surface
• Heavy-duty metal case; matte black finish
• Utilizes a superior-quality, state-of-the-art transducer element
and circuitry
• Transformerless, direct-coupled design to ensure clear, transparent
reproduction of even the most delicate transients at the highest
output levels
• Phantom power operated
• 250-ohm Impedance
• Outputs for interfacing with auxiliary equipment
• Frequency response range of 50 Hz - 18 kHz
• Sensitivity of -65 dB +/- 3 dB
• Integrated metal hanger; matte black finish; 20-ft. cable included
• Stainless steel, adjustable black hanger
(other accessories listed on page 59)
MICROPHONE ACCESSORIES
STANDS
MOUNTS
MFM
SF4 - Floor Stand
MFM - Flange Mount
•34" to 62" adjustable height
•For use with models GCU250 & GDU150
•3-pin female XLR connector, non-shock-isolated
•Round 10" diameter die cast
base, 9 lb.
•
3-1/4" H x 1-3/4" dia. base, 3 ounces
•Grip-action clutch and
chrome-plated tubing
MSM - Shock-Isolated Microphone Base
•For use with models GCU250 & GDU150
SB6 - Floor Boom Stand
•Telescopic floor stand
•Sliding 30" boom arm
•34" to 62" adjustable
height, 6 lb.
•Chrome-plated tubing
•Tripod base
•Provides superior mechanical noise and vibration handling
•Lightweight ABS material housing
•XLR (female) connector
•Thick, shock-absorbing rubber cushion
•4-3/4" W x 1-3/4" H x 4" D; 6 ounces
MSM
DS3 - Desk Stand
•3" chrome-finish tube
•6" cast iron base, 3 lb.
CABLES
XLR25 - Microphone Cable
•For use with models HDU250,
HDU150, & HDO100
•25' cable; Male XLR to female XLR,
XLR25
2-conductor plus shield
DS3
SB6
SF4
MAC - Microphone Cable Assembly
•For use with models HDU250,
HDU150, & HDO100
•25' cable; Female XLR to stripped andtinned
wires, 2-conductor plus shield
MAC
Download from Www.Somanuals.com. All Manuals Search And Download.
|