Windows Setup Procedure (Vista)
What do you connect it to?
1
What is the Snowflake?
Where do you put it?
1. Under Start Menu, open the Control Pane,
Simply connect the Snowflake to the USB port
on your Macintosh or Windows computer.
Make sure that the active, on-axis side of the
diaphragm (again, the side with the metal grille)
is facing the desired source.
then select Sound.
The Snowflake is a high-quality condenser
microphone designed to give you professional
results with very little effort. Simply connect
it to your computer’s USB port, follow the
prompts and you’ll have high-fidelity sound in
no time! The Snowflake has its own digital
converter and specially-designed preamplifier,
both optimized to work in conjunction with
Blue’s precision-machined capsule to make sure
that you always get the best sound possible
into your computer.
The Snowflake’s unique design allows you to
place it on a desk or flat surface near your
computer, or mounted to the screen of most
laptops. Gently grasp the top and bottom
halves of the Snowflake mounting box and
slide them away from each other (figure 1).
You’ll find the USB cable snugly fit inside. The
top half of the mount can then be positioned
on any flat surface (figure 2), or hung over
the back of most laptops (figure 3). The
Snowflake capsule also pivots back and forth
and rotates side-to-side for optimal positioning.
2. Select Recording tab; insure that Blue Snow-
flake is selected as Working with check mark
next to icon (Disable alternate mic if necessary).
3. Click on Properties; select the Levels tab,
set your input level, click Apply, then OK.
2
4. Exit control panel.
Snowflake Setup
Macintosh Setup Procedure:
Specifications
Transducer Type: Pressure Gradient
Polar Pattern: Cardioid
1. For OSX users: in the Apple menu, open
System Preferences.
2. Double-click Sound preference file.
3. Click on the Input tab.
4. Double click Blue USB Snowflake Mic under
Choose a device for sound input dialog box.
5. Set input volume to the appropriate level.
6. Exit System Preferences.
Frequency Response: 35Hz – 20kHz
Sample Rate/Word Length: 44.1 kHz/16 bit
Maximum SPL (THD 0.5%): 120 dB SPL
Snowflake Suggested Applications
NOTE: Forceful positioning of the capsule
swivel can result in damage not covered
by the warranty.
The compact Snowflake was designed with
the traveler in mind. Because you just connect
it to your USB port, it offers a wide range of
applications coupled with an ease of use
never before offered in a professional-quality
microphone. Some suggested applications
include podcasting, internet conferencing,
internet telephony, narration, dictation, field
recording, lecture recording, baby monitoring,
and of course, our favorite, recording your
own music!
Windows Setup Procedure
(Win98/XP/NT):
When not in use, just disconnect the USB
cable and store it in the mounting box, sliding
both haves together to close. When traveling
with the Snowflake, gently swivel the active
side of the round capsule head (with the metal
grille) so that it faces down and into the box
(figure 4). This will help protect the precision
capsule from damage.
5706 Corsa Ave., Suite 102, Westlake Village, CA 91362
1. Under Start Menu, open the Sounds and
Audio Devices control panel.
2. Select Audio tab; insure that Blue Snowflake
USB Mic is selected as default device.
3. Click on Volume; select appropriate
volume level.
4. Exit control panel.
In keeping with our policy of continued product improvement, Baltic Latvian
Universal Electronics (BLUE) reserves the right to alter specifications without
prior notice.
3
Portable Professional USB mic
© 2008 Blue Microphones, LLC. All Rights Reserved. Blue Microphones, Blue
Oval and Snowflake are registered trademarks of Blue Microphones.
Macintosh is
a
registered trademark of Apple Computer, Inc. Windows is
a
4
registered trademark of Microsoft, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|