In Car Video
IVSC-5501
Operating and installation instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
General
Installation and safety notices
Thank you for deciding to use a Blau- Before connecting your signal conver-
punkt product. We hope you enjoy us- ter, please read the following informati-
ing this new piece of equipment.
on carefully.
Please read these operating instruc- The battery’s negative terminal must
tions before using the equipment for remain disconnected whilst you are
the first time.
installing and connecting the unit.
The Blaupunkt editors are constantly Whilst doing so, you must observe the
working on making the operating in- vehicle manufacturer’s safety notices
structions clearer and easier to under- (airbags, alarm systems, trip computers,
stand. However, if you still have any immobilizers).
questions on how to operate the equip-
Before drilling any holes, you must make
ment, please contact your dealer or the
sure that no installed cables or vehicle
telephone hotline for your country. You
components can be damaged.
will find the telephone numbers printed
When installing the signal converter, se-
at the back of this booklet.
lect a location in the vehicle that allows
We provide a manufacturer guarantee
you to attach it firmly into place using
for our products bought within the Eu-
screws. The installation location should
ropean Union. You can view the guar-
be such that the signal converter does
antee conditions at www.blaupunkt.de
not get in the way of the driver and can-
not endanger the occupants in the event
or ask for them directly at:
of the vehicle suddenly coming to a halt,
Blaupunkt GmbH
for instance, during an emergency stop.
Hotline CM/PSS 6
Robert Bosch Str. 200
D-31139 Hildesheim
Accessories
We recommend you use accessories
that have been approved by Blaupunkt.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED EQUIPMENT
INSTALLATION
Supplied equipment
Installation
The signal converter is supplied with all Note:
the parts listed below. Please check that
•
Before connecting the monitors to
your signal converter, check that
the +/- and the switched positive
are connected properly. After con-
necting the +/- and the switched
positive, the red LED on the sig-
nal converter must light up!
the range of parts supplied with your de-
vice is complete. If one of the listed parts
is missing, please contact your dealer
immediately.
● Signal Converter
● Connecting cable
● RGB adapter
Positive connection
● Installation and operating instruc-
Connect the fuse holder (5A fuse) to pro-
tect the positive cable (3) (see Fig. 1).
The fuse holder must be connected to
the positive terminal at a distance of
max. 30 cm from the vehicle battery (if
necessary, drill a hole in the bulkhead
use the appropriate cable grommets).
tions
Signal Converter
7 607 003 550
Switched positive
Connect the switched positive cable (4)
(see Fig. 1) to the switched positive out-
put (
) of the main system unit (e.g.
car radio or navigation unit). If connect-
ing to the vehicle’s terminal 15, you must
connect a fuse holder (1A fuse) to pro-
tect the switched positive cable (4) (see
Fig. 1). The fuse holder must be con-
nected to the positive terminal at a di-
stance of max. 30 cm from the vehicle
battery (if necessary, drill a hole in the
bulkhead and use the appropriate ca-
ble grommets).
Connecting cable
RGB adapter
Negative (earth) connection
Attach the negative cable (1) (see Fig. 1)
directly to the vehicle body using a screw.
Scratch the surface down to the bare
metal at the point at which the earth con-
tact is made and apply graphite grease
(important for a good earth connection).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
•
If the installation requires holes to be
drilled or any other changes to the
vehicle to be made, please contact
a specialist workshop in your area.
Note:
You cannot display PAL video on the
wide vision TV monitor using the RGB
input.
In this case, the PAL video signal must
be connected directly to the AV input of
the wide vision TV monitor.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
12V
Earth/GND
(1)
1
DC 12V IN
Monitor
(3)
Audio in
(4)
+12V
R1
L1
RGB IN
+12V Permanent
Fig. 1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Video in
1
2
3
4
DC 12V IN
Monitor
Audio in
R1
L1
R2
L2
R3
L3
R4
L4
RGB IN
Audio in
RGB in
Fuse ( 4 A)
E
S
OUTPUT
1
2
3
4
RGB OUT
RGB out
Monitors
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION DIAGRAM
TravelPilot DX
7 607 001 601 / 1,5 m
7 607 001 602 / 4 m
Signal converter
7 607 001 600
RGB adapter
7 607 001 601 / 1,5 m
7 607 001 602 / 4 m
12V
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION DIAGRAM
I V M S / R
V i d e o o u t
u d A i o R o u t
u d A i o L o u t
t e r v ( I e V r S C - 5 5 0 1 S ) i g n a l C o n
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Features
Specifications
4 audio/video inputs:
Video input:
Cinch jacks
Composite Video, 0.7 ~ 2.0 Vpp,
75 Ohm
1 RGB input:
Audio input:
15-pin Sub-D socket
0 ~ 0.3 Vrms, 10-20 kHz
4 monitor outputs:
RGB input (video signal, internal re-
sistance 100 ohm):
CCVS 50Hz, 8-pin jack, with power,
earth, switched positive
min –1.0 / max 1.0 Vdc
typical 0.7 / max 2.0 Vpp
1 RGB output:
15-pin Sub-D plug-type connector
RGB input (composite-sync, internal
resistance 100 ohm):
Conversion:
RGB (NTSC) 60 Hz in CCVS 50Hz
CCVS 50Hz in RGB (NTSC) 60 Hz
min –1.0 / max 1.0 Vdc
min 0.7 / typical 1.0 / max 2.0 Vpp
Power input:
Video output:
4-pin plug-type connector
Composite Video, 0.7 ~ 2.0 Vp-p,
75 Ohm
Metal housing
Audio output:
0 ~ 0.3 Vrms, 10-20 kHz
RGB output (video signal, internal re-
sistance 100 ohm):
min –1.0 / max 1.0 Vdc
typical 0.7 / max 2.0 Vpp
RGB output (composite sync, inter-
nal resistance 100 ohm):
min –1.0 / max 1.0 Vdc
min 0.7 / typical 1.0 / max 2.0 Vpp
Power supply:
DC 12V, +/- 10%, max. 5A
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Números de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
01-576 9473
01-4598830
02-369 6464
40 2085
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 0800-550 6550
(IRL) 01-4149400
(I)
02-369 6331
40 4078
Luxembourg (L)
Netherland
Norway
Portugal
Spain
(NL)
023-565 6348
66-817 000
01-2185 00144
902-120234
08-7501500
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
(N)
(P)
(E)
(S)
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ)
02-6130 0441
01-333 9575
0800-118922
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
Poland
(PL)
Turkey
USA
(TR)
0212-3350677
0212-3460040
708-6817188
(USA) 800-2662528
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
05/02
CM/PSS - 8 622 403 178
Download from Www.Somanuals.com. All Manuals Search And Download.
|