Radio / CD
San Francisco CD70
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
1
5
6
9
8
14
13
12
11
10
7
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
1
2
button - opens the operating panel
Button - switches the radio and mute
function on/off
3
4
Volume control
Soft keys - the function of the soft
keys depends on the current content
of the display
5
OK button - confirms menu entries
and leaves the menu
6
7
8
DSA button - selects the DSA menu
Multifunction rocker switch
MENU button - selects the menu for
basic settings
9
AUD button - adjusts bass and treble,
balance and fader as well as loudness
:
;
<
=
DIS button - changes display contents
Display
CD button - starts CD playback
CDC button - starts CD changer play-
back (only if connected) or
plays an external audio source (only if
connected)
>
TUNE button - activates radio mode
Selects the radio function menu (only
possible in radio mode)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Selecting a track.................................... 22
Fast search (audible)............................. 22
Random play (MIX) ............................... 22
Scanning tracks (SCAN) ....................... 22
Repeating a track (REPEAT)................. 23
Changing the display............................. 23
Programming favourite CD tracks ......... 23
Naming CDs.......................................... 24
Notes ............................................... 6
Road safety ............................................. 6
Installation ............................................... 6
Accessories............................................. 6
Guarantee ............................................... 6
International telephone information......... 6
Theft protection, KeyCard ............. 7
Inserting the KeyCard ............................. 7
Removing the KeyCard ........................... 7
Replacing / “training” KeyCards............... 7
Lost or damaged KeyCards..................... 8
“Training” a new KeyCard / entering the
master code ............................................ 8
Optical theft protection indicator (LED) ... 8
Viewing radio pass data .......................... 9
Caring for your KeyCard.......................... 9
CD changer mode (optional) ....... 25
Switching to CD changer mode............. 25
Selecting a CD ...................................... 25
Selecting a track.................................... 25
Fast search (audible)............................. 25
Changing the display............................. 25
Repeating individual tracks or whole
CDs (REPEAT) ...................................... 25
Random play (MIX) ............................... 26
Scanning all tracks on all CDs (SCAN) . 26
Naming CDs.......................................... 26
Programming favourite CD tracks ......... 27
Switching on/off ............................. 9
First use ........................................ 10
Volume adjustment ...................... 11
Audio settings .............................. 12
Setting the display ....................... 13
CLOCK time .................................. 28
Setting the time ..................................... 28
Switching between 12- and
24-hour clock mode............................... 29
Permanent time display when unit is off . 29
Radio mode................................... 14
Switching to radio mode ........................ 14
Switching the RDS function on and off . 14
Switching the AF function on and off .... 14
Selecting the frequency range /
memory bank ........................................ 14
Tuning to a station ................................. 15
Selecting short-/long-range reception ... 15
Setting station scanning sensitivity ....... 16
Storing stations ..................................... 16
Storing stations automatically
(“Travelstore”) ........................................ 16
Listening to preset stations ................... 17
Radio scan ............................................ 17
Setting the scan time............................. 17
Programme type (PTY) ......................... 18
Optimising radio reception .................... 19
Switching between stereo and mono .... 20
Changing the display............................. 20
Selecting radio text display.................... 20
Naming a station ................................... 20
DSA - Digital Sound Adjustment 30
Switching DSA on/off ............................ 30
Lining up the equaliser automatically .... 30
Selecting an equaliser........................... 31
Select sound preset .............................. 31
Setting the equalisers manually ............ 31
Setting aid for the equaliser .................. 32
DNC - Dynamic Noise Covering .. 33
Lining up DNC....................................... 33
Switching DNC line-up on/off ................ 33
Setting the DNC increase...................... 33
TMC for dynamic navigation
systems ......................................... 34
Pre-amplifiers ............................... 34
Subout/subwoofer........................ 35
High-pass filter ............................. 35
External audio sources................ 36
Technical data .............................. 36
Installation instructions............. 137
CD Mode........................................ 22
Switching to CD mode, inserting a CD.. 22
Removing a CD ..................................... 22
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Thank you for deciding in favour of a Blau-
punkt product. We wish you a great deal of
pleasure with your new car radio.
CD changer
The following Blaupunkt CD changers can be
connected to the radio: CDC A 06, CDC A
08, CDC A 072 and IDC A 09.
The CD changers CDC A 5 and CDC A 071
can also be connected if you use an adapter
cable (Blaupunkt no.: 7 607 889 093).
Note
Before using your car radio, please read these
instructions carefully and familiarise yourself
with the unit. Keep these instructions in your
vehicle for later reference.
Guarantee
The scope of the guarantee complies with the
legal provisions applicable in the country in
which the unit was bought.
Such legal provisions notwithstanding, Blau-
punkt grants a 12-month guarantee.
If you have any queries regarding the terms
of the guarantee, please consult your autho-
rised Blaupunkt dealer. The purchase receipt
applies in all cases as your guarantee slip.
Road safety
Road safety has priority. Only operate
your car radio if road and traffic conditions
allow. Familiarise yourself with the unit
before setting off on your journey.
You should always be able to hear police,
fire and ambulance sirens in good time.
For this reason, set the volume of your car
radio at a suitable level.
International telephone
information
Should you have any questions about how to
use the car radio or require any further infor-
mation, please call us!
Installation
If you would like to install your car radio your-
self, please read the installation and connec-
tion instructions at the end of the manual.
The telephone information service numbers
are printed on the last page of this manual.
Accessories
Please use only Blaupunkt-approved acces-
sories.
Remote controls
The most important functions can be select-
ed safely from the steering wheel using the
optional remote controls RC 08 or RC 10.
The RC 10 H remote control is included.
Amplifiers
All Blaupunkt amplifiers are suitable for use
with the radio.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
THEFT PROTECTION
Note:
Theft protection, KeyCard
If a card that does not belong to the unit (for
example, a bankcard) is inserted, the display
will read “Wrong KC”.
Remove the incorrect card and insert a card
that the unit is able to recognise.
Your radio comes with two KeyCards.
To replace a lost or damaged KeyCard, con-
tact your Blaupunkt dealer.
If you use two KeyCards, the settings for the
first KeyCard are also used for the second
KeyCard. You can, however, store the follow-
ing functions individually:
Preset stations, beep volume, equaliser set-
tings.
Removing the KeyCard
To unlock the operating panel,
➮ Press the button 1.
This will open the operating panel.
In addition, the last values set for frequency
range, station, scanning time, and switch-on
volume remain stored.
➮ Use the “slide” to push the card to the
right as far as it will go.
➮ Remove the card from the operating
This way, after you insert your KeyCard, the
unit will always be in the basic configuration
that you have chosen.
panel.
➮ Close the operating panel.
Inserting the KeyCard
Note:
To discourage theft, always remove your Key-
Card before exiting the vehicle and leave the
operating panel open.
➮ Press the
button to open the operat-
ing panel 1.
➮ Insert the KeyCard as shown in the pic-
ture (Arrow 1) with the contacts facing
downward.
For reasons of safety, the operating
panel must be closed whenever the vehi-
cle is in motion.
➮ Use the slide to push the card carefully
in the direction shown by the arrow (2)
as far as it will go.
Replacing / “training” KeyCards
Note:
No more than two KeyCards can be used for
each unit.
If you already have two KeyCards for your unit
and you “train” a third KeyCard, then the unit
can no longer be operated with the KeyCard
that was not used in training.
1
3
➮ Close the operating panel (Arrow 3).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
THEFT PROTECTION
To “train” a new KeyCard as a replacement
for a lost or unusable KeyCard:
“Training” a new KeyCard /
entering the master code
If you no longer have any valid KeyCards for
your unit and want to “train” a new KeyCard:
➮ Insert the remaining valid KeyCard and
switch on the unit.
➮ Press the MENU button 8.
➮ Insert a new KeyCard that is unknown
to the unit.
➮ Press the soft key 4 with the display
allocation “KC”.
➮ Close the operating panel.
➮ Turn off the unit if necessary.
➮ Press the soft key 4 with the display
allocation “LRN”.
➮ Simultaneously hold down the TUNE
button > and the second soft key 4
from the top on the left side 2.
The display will read “LEARN KC”.
➮ Remove the first KeyCard.
The display will read “INSERT”.
➮ Insert the new KeyCard.
The display will read “LEARN OK”.
To exit the KeyCard menu
The display will read “0000”.
Enter the four-digit master code from the ra-
dio pass as follows:
➮ Use the
/
buttons 7 to enter the
respective digits of the master code.
Press the buttons until the desired num-
ber appears on the display.
➮ press the MENU button 8 or the OK
button 5.
Now the car radio can be used with two Key-
Cards again.
➮ Use the
buttons 7 to move from
one digit to the next during input.
➮ Once the master code is displayed cor-
rectly, press the OK button 5.
Lost or damaged KeyCards
If all of the KeyCards belonging to a unit have
been lost or damaged, first a new KeyCard
with the master code of the unit must be
“trained”. The master code of the unit is con-
tained in the radio pass.
The new KeyCard is accepted when the unit
switches to play.
Optical theft protection indicator
(LED)
The ON/OFF button and the CD bay illumi-
nation can be set to blink when the unit is off
and the KeyCard has been removed. To do
this, the menu setting “LED” must be set to
“ON”.
Always keep the radio pass in a safe
place, but never in your vehicle.
To “train” a new KeyCard, follow the instruc-
tions given in the section “Training a new Key-
Card / entering the master code”.
If necessary, you can use this KeyCard to train
a second KeyCard. For instructions on how
to do this, read the section “Replacing / train-
ing KeyCards”.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “KC”.
➮ Press the soft key 4 with the display
New KeyCards can be obtained from your
dealer.
allocation “LED”.
The display will show the current status “LED
ON” or “LED OFF”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
THEFT PROTECTION
SWITCHING ON/OFF
➮ Press the soft key 4 with the display
allocation “LED” to toggle between “LED
ON” and “LED OFF”.
Switching on/off
There are various ways of switching the car
radio on and off.
To exit the KeyCard menu
Switching on/off using the button
➮ Press the OK button 5 to go up one
level in the menu or press the MENU
button 8 to exit the menu. The settings
are now stored.
2
➮ To switch the unit on, press the button
2.
The car radio is now switched on.
Viewing radio pass data
➮ To switch the unit off, hold the button 2
Using the KeyCard that came with your unit,
you can view the radio pass data, such as
unit name, type number (76 ...) and serial
number, on the display.
down for more than two seconds.
The car radio is now switched off.
Switching on/off using the
ignition
If the car radio is correctly connected to the
ignition and has not been switched off using
the button 2, it is switched on/off simulta-
neously with the ignition.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “KC”.
➮ Press the soft key 4 with the display
allocation “READ”.
The radio pass data will scroll across the dis-
play.
You can also switch on your car radio when
the vehicle ignition is off.
To exit the KeyCard menu:
➮ To do so, press the button 2.
➮ Press the MENU button 8 or the OK
button 5.
Note:
To protect the vehicle battery, the unit switch-
es off automatically after one hour.
Caring for your KeyCard
Trouble-free KeyCard function is assured pro-
vided that the contacts are free of foreign
particles. Avoid direct skin contact with the
contacts.
Switching on/off using the
KeyCard
You can switch the car radio on or off by in-
serting and removing the KeyCard if the unit
was previously switched off using the button
2. You can read about inserting/removing
the KeyCard in the chapter “Theft protection,
KeyCard”.
If necessary, clean the KeyCard contacts us-
ing a lint-free cloth soaked in alcohol.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR CAR RADIO FOR THE FIRST TIME
Setting the tuner
First use
To ensure proper tuner function in
the US the tuner must be set to “US”.
If the unit is being connected for the first time
or if the power supply to the unit has been
interrupted, the Install menu will appear. The
following settings are made in the Install
menu:
➮ Press the soft key 4 with the display
allocation “TUNE”.
➮ Select “EUROPE” or “US” using the us-
ing the or button 7.
➮
Selection of an external audio source
instead of a CD changer
➮ Press the OK button 5.
➮
➮
Time setting
Switching the internal amplifier on/off
Tuner configuration for US or European
operation
➮ Press the soft key 4 with the display
➮
➮
Reset to factory defaults
Internal amplifier on/off.
allocation “AMP”.
➮ Select “AMP ON” or “AMP OFF” using
the using the or button 7.
You can reopen the Install menu at any time:
➮ Press the OK button 5.
➮ Hold down the MENU button 8 until
the Install menu appears.
Note:
If you set the internal amplifier to “AMP OFF”,
there will be no playback via the loudspeak-
ers connected directly to the unit. In this case,
playback will be solely via an external ampli-
fier.
Changing settings
Selecting an external audio source
➮ Press the soft key 4 with the display
allocation “AUX” .
If the display reads “AUX”, then the input is
already on.
Reset (factory defaults)
➮ Press the soft key 4 with the display
➮ Press the or button 7 to toggle
allocation “NORM”.
“AUX” on or off.
The display will read “NORMSET”.
➮ Press the OK button 5.
If you really want to reset the device to the
factory presets,
Note:
➮ press the OK button 5.
If the AUX input is on, it can be selected with
the CDC button =.
Exiting the Install menu
To exit the install menu,
Setting the clock
➮ Press the soft key 4 with the display
➮ press the OK button 5. The settings
allocation “CLK”.
are now stored.
➮ Set the hour using the or button
7.
➮ Press the button 7.
➮ Set the minutes using the or button
7.
➮ Press the OK button 5.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VOLUME
Mute setting
This feature enables you to lower the system
volume instantaneously (mute).
Volume adjustment
The system volume can be adjusted in steps
from 0 (off) to 50 (maximum).
➮ Briefly press the button 2.
“MUTE” appears on the display.
➮ To raise the system volume, turn the
volume control 3 to the right.
➮ To lower the system volume, turn the
volume control 3 to the left.
Deactivating the mute setting
➮ Briefly press the button 2
or
Setting the switch-on volume
➮ turn the volume control 3.
It is possible to adjust the volume that will play
when you switch the radio on.
Mute during telephone
➮ Press the MENU button 8.
If your car radio is connected to a mobile tele-
phone, the volume will be muted as soon as
you “pick up” the telephone. In order for this
to work, the mobile telephone has to be con-
nected to the car radio as described in the
instructions.
➮ Press the soft key 4 with the display
allocation “VAR”.
➮ Press the soft key 4 with the display
allocation “VOL”.
➮ Set the volume using volume control 3
or the or buttons 7.
Setting the volume for the
warning tone (beep)
If you hold down a button for longer than two
seconds when using certain functions, e.g.
storing a station on a station button, a warn-
ing tone (beep) sounds. The volume of this
beep is adjustable.
If you wish to set the volume active before
the unit was last switched off as the switch-
on volume,
➮ press the button 7.
“LAST VOL” appears on the display.
Risk of serious injury! If the switch-on
volume is set at the maximum, the volume
can be very high when you switch on your
car radio.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “VAR”.
➮ Press the soft key 4 with the display
If the volume was set on maximum
before the unit was last switched off and
the switch-on volume is set at “LAST VOL”,
the volume can be very high when you
switch on your car radio.
allocation “BEEP”.
➮ Adjust the volume using the and
buttons.
If you wish to deactivate the beep,
➮ press the button 7.
In both cases, your hearing may suffer
serious damage!
“BEEP OFF” appears on the display.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
➮ Press the OK button 5 to go back to
the previous menu level or the MENU
button 8 to leave the menu altogether.
The settings are now stored.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO SETTINGS
Audio settings
If you want to deactivate the loudness func-
tion,
Note:
➮ press the button 7.
You can adjust the bass, treble and loudness
settings separately for each audio source.
“LOUD OFF” appears on the display.
When the settings have been completed,
➮ press the AUD button 9.
Bass settings
➮ Press the AUD button 9.
“AUDIO 1” appears on the display.
Setting the right/left balance
➮ To set the balance, press the AUD but-
ton 9.
➮ Press the soft key 4 with the display
allocation “BASS”.
“AUDIO 1” appears on the display.
➮ Press the or button 7 to adjust
➮ Press the soft key 4 with the display
the bass.
allocation “BAL”.
When the settings have been completed,
➮ Press the or button 7 to adjust the
➮ press the AUD button 9.
right/left balance.
When the settings have been completed,
Treble settings
➮ Press the AUD button 9.
“AUDIO 1” appears on the display.
➮ press the AUD button 9.
Fader settings, front/back
➮ To set the fader, press the AUD button
9.
➮ Press the soft key 4 with the display
allocation “TREB”.
➮ Press the or button 7 to adjust
“AUDIO 1” appears on the display.
the treble.
➮ Press the soft key 4 with the display
When the settings have been completed,
allocation “FADE”.
➮ press the AUD button 9.
➮ Press the or button 7 to adjust the
front/back fader.
Loudness
Loudness means the bass levels are aurally
compensated, i.e. they are increased at low-
er volume levels.
When the settings have been completed,
➮ press the AUD button 9.
➮ Press the AUD button 9.
“AUDIO 1” appears on the display.
➮ Press the soft key 4 with the display
allocation “LOUD”.
➮ Press the or button 7 to adjust
the loudness.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
Display brightness - night
Setting the display
You can adjust the display to your needs and
the position of the car radio in your vehicle.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “DISP”.
Setting the reading angle
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “NGHT”.
➮ Press the soft key 4 with the display
➮ Set the brightness using the
7.
button
allocation “DISP”.
➮ Press the soft key 4 with the display
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
allocation “ANGL”.
➮ Set the reading angle using the or
buttons 7.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Setting the display brightness
If your car radio has been connected as de-
scribed in the instructions, the display bright-
ness will be activated when you turn on the
headlights. The display brightness can be set
separately in stages from 1 - 9 for day and
night.
Display brightness - day
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “DISP”.
➮ Press the soft key 4 with the display
allocation “DAY”.
➮ Set the brightness using the
7.
button
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Radio mode
This unit is equipped with an RDS radio re-
ceiver. Some FM stations broadcast a signal
that contains not only the programme, but also
information such as the station name and pro-
gramme type (PTY).
If it is receivable and the RDS function is on,
then the station name will appear on the dis-
play. Furthermore, the programme type will
be displayed briefly each time you tune to a
different station. For more information, please
see the section “Programme Type (PTY)”.
To deactivate the RDS function,
➮ in radio mode, press the soft key 4
with the display allocation “TA” again.
The RDS function is off if the display reads
“TA” in normal characters.
Switching the AF function on and
off
To use the AF function,
➮ in radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
In addition, this device is equipped with an
“Alternative Frequency” (AF) function:
➮ Press the soft key 4 with the display
➮
AF: If the AF function is on, the unit will
search automatically for the frequency
that provides the best reception of the
station to which the radio is tuned.
allocation “RDS”.
➮ Press the TUNE button > or wait eight
seconds. The settings are now stored.
The AF function is active if an arrow symbol
appears in front of “RDS” on the display.
Note:
Due to differences in broadcasting infrastruc-
ture in the US, some car radio functions are
not supported. For this reason, the soft keys
“REG” in the Radio Function menu and “PTY”
in the Radio menu are disabled.
To deactivate the AF function,
➮ in the Radio Function menu, press the
soft key 4 with the display allocation
“RDS” again.
The AF function is inactive if there is not an
arrow symbol in front of “RDS” on the display.
Switching to radio mode
If the unit is in CD or CD changer mode,
➮ press the TUNE button >.
Selecting the frequency range /
memory bank
This unit can be used to receive both FM and
AM broadcasts. There are four memory banks
for FM stations and two memory banks for
AM stations.
Switching the RDS function on
and off
To use the RDS function,
➮ in radio mode, press the soft key 4
Six stations can be stored in each memory
bank.
with the display allocation “TA”.
* The RDS function is on if the display reads
“TA” in inverse characters.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Selecting a frequency range
Browsing in broadcasting networks (FM
only)
To select the FM or AM frequency range,
If a station provides multiple programmes,
then you can browse these so-called “broad-
casting networks”.
➮ in radio mode, press the TUNE button
>.
The Radio Function menu will appear in the
display.
➮ Press the or button 7 to switch to
the next station in the network.”
➮ Press the soft key 4 with the display
allocation “FM” for the FM frequency
range.
Note:
In order to use this function, the RDS conve-
nience function must be activated.
➮ Press the soft key 4 with the display
allocation “AM” for the AM frequency
range.
This method can only be used to tune to sta-
tions that you have already listened to before.
To do this, use the scan or “travelstore” func-
tion.
➮ Press the TUNE button > or wait eight
seconds. The settings are now stored.
Selecting short-/long-range
reception
You can choose whether tuning should be lim-
ited to local stations (short-range reception)
or also include distant stations (long-range
reception).
Selecting a memory bank
To move from one memory bank to the next
(FM1, FM2, FM3 or FMT or AM and AMT),
➮ in radio mode, press the soft key 4
with the display allocation “NEXT” until
the desired memory bank appears on
the display.
➮ In radio mode, press the TUNE button
>.
Tuning to a station
There are various ways of tuning to a station.
The Radio Function menu will appear on the
display.
➮ Press the soft key 4 with the display
Automatic station scanning
allocation “NEXT”.
➮ Press the or button 7.
The radio will be tuned to the next receivable
station.
The “second page” of the Radio Function
menu will appear on the display.
➮ Press the soft key 4 with the display
Manual tuning
allocation “LOC”.
You can also tune manually.
➮ Press the or button 7.
The current status “LOCAL” (short-range re-
ception) or “DISTANCE” (long-range recep-
tion) will appear briefly on the display. If the
“LOCAL” function is active, an arrow symbol
will appear next to “LOC”.
Note:
This function is available only when the RDS
function is inactive.
➮ press the TUNE button > or wait eight
seconds. The settings are now stored.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
The display will show the current sensitivity
value. “DX 3” means maximum sensitivity for
long-range reception, while “DX 1” means
minimum sensitivity.
Setting station scanning
sensitivity
You can set the sensitivity of short- and long-
range reception separately for AM and FM
reception.
➮ Press the OK button 5 to go up one
level in the menu or press the MENU
button 8 to exit the menu. The settings
are now stored.
Sensitivity for short-range reception
(S-LO)
➮ Press the MENU button 8.
Storing stations
➮ Press the soft key 4 with the display
Storing stations manually
allocation “TUN”.
➮ Select the desired FM memory bank
(FM1, FM2 FM3, FMT) or an AM mem-
ory bank (AM or AMT).
➮ Press the soft key 4 with the display
allocation “S-LO”.
➮ Use the
buttons 7 to select
➮ Tune to the desired station as described
whether you want to set the sensitivity
for the AM or FM frequency range.
in the section “Tuning to a station”.
➮ Use the
/
buttons 7 to adjust the
➮ Hold down one of the six soft keys, un-
der which the station is to be stored, for
longer than two seconds.
sensitivity.
The display will show the current sensitivity
value. “LO 3” means maximum sensitivity for
short-range reception, while “LO 1” means
minimum sensitivity.
Storing stations automatically
(“Travelstore”)
You can automatically store the six strongest
stations in the region. These are stored in the
FMT or AMT memory bank.
➮ Press the OK button 5 to go up one
level in the menu or press the MENU
button 8 to exit the menu. The settings
are now stored.
Note:
Sensitivity for long-range reception
(S-DX)
Any stations previously stored in the memory
bank used will be deleted in the process.
➮ Press the MENU button 8.
To use the “Travelstore” function,
➮ Press the soft key 4 with the display
➮ in radio mode, press the TUNE button
>.
allocation “TUN”.
The Radio Function menu will appear on the
display.
➮ Press the soft key 4 with the display
allocation “S-DX”.
➮ press the soft key 4 with the display
➮ Use the
buttons 7 to select
allocation “TS”.
whether you want to set the sensitivity
for the AM or FM frequency range.
The “Travelstore” process will begin. “T-
STORE” will appear on the display. Once the
process is complete, the radio will be tuned
to the station stored in memory slot 1 of the
FMT or AMT memory bank.
➮ Press the
/
buttons to adjust the
sensitivity.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
The scan will start. The memory banks will
be “scanned” one after the other starting with
the FM1 memory bank. An arrow symbol will
light up next to each memory slot scanned.
Listening to preset stations
➮ Select the frequency range and memo-
ry bank.
➮ Press the soft key 4 with the display
allocation of the station name or fre-
quency of the desired station.
Stop scanning, continue listening to
station
➮ Press the OK button 5.
The scan will stop; the radio will remain tuned
to the last station scanned.
Radio scan
You can scan all receivable stations. The scan
time is adjustable within a range of 5-30 sec-
onds.
Setting the scan time
➮ Press the MENU button 8.
Starting a radio scan
To start the radio scan,
➮ Press the soft key 4 with the display
allocation “VAR”.
➮ in radio mode, press the TUNE button
>.
➮ Press the soft key 4 with the display
allocation “SCAN”.
The Radio Function menu will appear on the
display.
➮ Press the or button 7 repeatedly
until the desired scan time appears on
the display.
➮ Press the soft key 4 with the display
allocation “SCAN”.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
The scan will start. The radio will be tuned to
the next receivable station, in ascending or-
der.
Preset Scan
Note:
You can scan all stations that are stored in
the memory banks and can currently be re-
ceived. The scan time can be adjusted within
a range of 5-30 seconds in the menu.
The scan time that is set also applies for scan-
ning in CD, cassette, and minidisk mode (de-
pending on how the car radio is equipped) as
well as in CD changer mode.
Staring a preset scan
To start the preset scan,
➮ in radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
➮ Press the soft key 4 with the display
allocation “PS”.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Deactivating PTY
Programme type (PTY)
Besides the station name, some stations also
broadcast information about the type of pro-
gramme that they provide. Your car radio can
receive and display this information.
➮ In radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display. PTY will light up on the display.
Examples of such programme types include:
➮ Press the soft key 4 with the display
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
allocation “PTY”.
PTY will no longer be lighted on the display.
To return to the basic Radio menu,
CLASSICS
You can use the PTY function to specifically
select stations that broadcast a certain type
of programme.
➮ press the TUNE button > or wait eight
seconds. The settings are now stored.
Selecting a programme type and starting
a scan
If you start a PTY scan and no stations are
found, this scan will continue to run in the
background. As soon as a station with the
selected programme type is received, the unit
will automatically switch from the current sta-
tion or from CD / CD-changer mode to the
station with the selected programme type.
➮ Press the or button 7.
The current programme type will appear on
the display.
To select a different programme type,
➮ press one of the
buttons 7 repeat-
Activating PTY
edly until the desired programme type
appears on the display.
To use the PTY function,
➮ in radio mode, press the TUNE button
>.
Or
to select a stored programme type,
The Radio Function menu will appear on the
display.
➮ press one of the soft keys 4 that is
with the display allocation with the de-
sired programme type.
➮ Press the soft key 4 with the display
allocation “PTY”.
➮ Press the or button 7 to start a
When PTY is activated, the last programme
type selected will briefly appear on the dis-
play. PTY will light up on the display.
scan.
The radio will be tuned to the first receivable
station with the selected programme type.
To return to the basic Radio menu,
Note:
➮ Press the TUNE button > or wait eight
If no station is found with the selected pro-
gramme type, then “NO PTY” will appear brief-
ly on the display. The radio will be retuned to
the last station received.
seconds. The settings are now stored.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Storing a programme type under a
station button
➮ Press the or button 7 repeatedly
until the desired HiCut level is shown on
the display.
➮ Use the or button 7 to select a
“HICUT 3” means maximum automatic atten-
uation of the highs and the noise level.
programme type.
To store a programme type,
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
➮ hold down one of the soft keys 4 with
the display allocation of a programme
type for longer than one second.
The programme type will be saved in the se-
lected memory slot.
Interference-related bandwidth selection
(SHARX)
Optimising radio reception
The SHARX function enables you to virtually
eliminate interference from neighbouring sta-
tions. Activate the SHARX function in areas
with high station density.
The HiCut function
The HiCut function improves sound quality
under poor reception conditions. When there
is interference, the highs and thus the noise
level are cut automatically.
Activating/deactivating SHARX
To activate/deactivate SHARX,
➮ press the MENU button 8.
Activating/deactivating HiCut
To activate/deactivate HiCut,
➮ press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
➮ Press the soft key 4 with the display
allocation “SHRX”.
allocation “TUN”.
The current status “SHARX ON” or “NO
SHARX” will appear briefly on the display. If
SHARX is activated, an arrow symbol will
appear next to “SHRX” on the display.
➮ Press the soft key 4 with the display
allocation “HCUT”.
➮ Press the or button 7.
If HiCut is deactivated, “NO HICUT” will ap-
pear briefly on the display.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Setting the HiCut level
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “HCUT”.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
Switching between stereo and
mono
In the event of poor reception, you can select
radio playback in mono. After each time the
car radio is switched on, playback is in ste-
reo.
Selecting radio text display
Some stations also use the RDS signal to
broadcast running text, so-called “radio text”.
You can permit or block radio text display.
➮ In radio mode, press the TUNE button
>.
➮ in radio mode, press the TUNE button
>.
The Radio Function menu will appear on the
display.
The Radio Function menu will appear on the
display.
➮ Press the soft key 4 with the display
allocation “NEXT”.
➮ Press the soft key 4 with the display
The “second page” of the Radio Function
menu will appear on the display.
allocation “NEXT”.
The “second page” of the Radio Function
menu will appear on the display.
➮ Press the soft key 4 with the display
allocation “RTXT”.
➮ Press the soft key 4 with the display
If the radio text function is active, an arrow
symbol will appear in front of “RTXT”.
allocation “MONO”.
The current status “MONO” or “STEREO” will
appear briefly on the display. If “MONO” is
activated, an arrow symbol will appear next
to “MONO”.
➮ Press the TUNE button > or wait for
eight seconds. The settings are now
stored.
Naming a station
You can assign to a stored station your own,
four-character name that will be shown on the
display.
➮ Press the TUNE button > or wait eight
seconds. The settings are now stored.
Changing the display
You can change what is shown on the dis-
play. The top line of the display (headline) can
be toggled to show the station name, frequen-
cy, programme type, or time.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
➮ Press the DIS button : repeatedly un-
til the desired information (station name,
frequency, programme type, or time)
appears in the headline.
allocation “NAME”.
You are now in edit mode. If the selected sta-
tion has not been assigned a name yet, four
underline characters will appear on the dis-
play.
➮ The current input position will blink.
➮ Use the soft key 4 with the display allo-
cation “PREV” or “NEXT” (for the previ-
ous or next stored station in the memory
bank) to select the station that you want
to name.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO MODE
➮ Use the
/
buttons 7 to select your
➮ Use the soft key 4 with the display al-
location “PREV” or “NEXT” (for the pre-
vious or next stored station in the mem-
ory bank) to select the station for which
you want to reset the name.
character. If a character should remain
vacant, select the underline character.
➮ Use the or button 7 to change the
input position.
➮ Press the soft key 4 with the display
➮ To store the name, press the OK button
5.
allocation “DEF”.
The station name is reset to the abbreviation
of the RDS station name.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Deleting station names
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “NAME”.
Now you are in edit mode.
➮ Use the soft key 4 with the display al-
location “PREV” or “NEXT” (for the pre-
vious or next stored station in the mem-
ory bank) to select the station for which
you want to delete the name.
➮ Press the soft key 4 with the display
allocation “CLR”.
The station name is deleted.
Resetting station names to RDS names
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “TUN”.
➮ Press the soft key 4 with the display
allocation “NAME”.
Now you are in edit mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
CD Mode
You can use this unit to play standard CDs
with a diameter of 12 cm.
Removing a CD
➮ Press the button 1.
The operating panel opens to the front.
Generally, so-called CD-Rs (home-recorded
CDs) can be played, but due to differences in
CD quality, Blaupunkt cannot vouch for per-
fect performance.
➮ Press the button on the open operat-
ing panel.
The CD is ejected.
➮ Carefully remover the CD.
Rewritable CDs (CD-RWs) cannot be played
on this unit.
Note:
If you do not remove the CD within eight sec-
onds, it will be drawn back into the CD drive.
Risk of damage to CD drive!
Single CDs with a diameter of 8 cm and
CDs which are not circular (“shape CDs”)
should not be used.
Selecting a track
➮ Press one of the buttons on the arrow
block 7 repeatedly until the number of
the desired track appears on the display.
We accept no liability for any damage to
the CD drive that may occur as a result of
the use of unsuitable CDs.
If the or button 7 is pressed once, the
current track is played again from the begin-
ning.
Switching to CD mode, inserting
a CD
Fast search (audible)
➮
If there is no CD in the drive,
For a fast search backwards or forwards
➮ press the button 1.
The operating panel opens.
➮ keep the
or
/
buttons 7
pressed until the fast search backwards
➮ Gently insert the CD into the CD com-
partment with the printed side upper-
most until you feel some resistance.
or forwards begins.
Random play (MIX)
The CD will be drawn into the drive automat-
ically.
Do not hinder or assist the drive as it draws
the CD in.
➮ Press the soft key 4 with the display
allocation “MIX”.
“MIX CD” appears briefly on the display. The
next track played will be randomly selected.
➮ Close the operating panel using light
Stopping MIX
pressure until you feel it latch into place.
The CD menu appears on the display, CD
playback begins.
➮ Press the soft key 4 with the display
allocation “MIX” one again.
➮
If there is already a CD in the drive,
“MIX OFF” appears briefly on the display.
➮ press the CD button <.
Scanning tracks (SCAN)
You can briefly listen in to all the tracks on a
CD.
The CD menu appears on the display and
playback begins from the point at which it was
last interrupted.
➮ Press the soft key 4 with the display
allocation “SCAN”.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
“SCAN” appears briefly on the display. The
CD tracks are played in ascending order.
Programming favourite CD tracks
With the TPM function (Track Programme
Memory), you can programme, store and play
your favourite tracks on a particular CD. No
matter what order the tracks are programmed,
they will always be played back in ascending
order. When playback of favourite tracks is
activated, only the previously programmed
tracks of the CD in the drive will be played.
Up to 30 CDs with a maximum of 40 tracks
each can be handled in CD mode.
Note:
The scanning time is adjustable. Read about
setting the scanning time in the section “Set-
ting the scanning time” in the chapter “Radio
mode”.
Stopping SCAN and continuing playback
➮ Press the soft key 4 with the display
allocation “SCAN” once again.
Selecting favourite tracks
The current track will then continue to play.
Proceed as follows to select your favourite
tracks on a CD:
Repeating a track (REPEAT)
➮ Press the soft key 4 with the display
➮ insert the CD from which you wish to
select your favourite tracks in the CD
drive;
allocation “RPT”.
The track is then repeated until RPT is deac-
tivated.
➮ choose your first favourite track;
Stopping REPEAT
➮ press the soft key 4 with the display
allocation “TPM” for more than one sec-
ond.
➮ Press the soft key 4 with the display
allocation “RPT” once again.
The track is now included in the list of favou-
rite tracks for this CD.
Normal playback is resumed.
Changing the display
In CD mode, you can switch between the
various display modes:
➮ Proceed in exactly the same way with
all your other favourite tracks on the CD.
Switching off playback of favourite tracks
➮
display of track number and time;
To call up the list of favourite tracks for the
inserted CD or to switch off playback of favou-
rite tracks,
➮
display of track number and playing
time;
➮
display of CD name and track number.
➮ press the soft key 4 with the display
To switch between the different display
modes,
allocation “TPM”.
The current TPM status (“TPM ON” or “TPM
OFF”) appears briefly on the display. When
playback of favourite tracks is active, an ar-
row symbol lights up alongside “TPM” on the
display.
➮ press the DIS button : repeatedly until
the desired information appears on the
display.
Note:
A CD name can only be displayed if a name
has been allocated to the inserted CD. Please
see the section “Naming CDs”.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CD MODE
Clearing preset tracks
➮ Use the or button 7 to change the
input position.
In order to clear individual tracks from the list
of favourite tracks for a CD,
➮ Press the OK button 5 to store the
name.
➮ switch on TPM;
➮ select the track you wish to clear;
Clearing a CD name
➮ hold down the soft key 4 with the dis-
play allocation “CLR” for approx. two
seconds.
➮ Listen to the CD whose name you wish
to clear.
➮ Press the MENU button 8.
“TR CLR” appears briefly on the display and
the track is cleared from the list.
➮ Press the soft key 4 with the display
allocation “CD”.
Clearing the list of favourite tracks for a
CD
➮ Hold down the soft key 4 with the dis-
play allocation “CD” until “CD CLR” ap-
pears on the display.
You can also clear the entire list of favourite
tracks for a CD. The CD whose favourite tracks
you wish to clear must be inserted at the time
of clearance.
The CD name has now been cleared.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
➮ Switch on TPM.
➮ Hold down the soft key 4 with the dis-
play allocation “CLR” for approx. five
seconds.
Clearing all CD names
➮ Listen to a CD.
“CD CLR” appears briefly on the display and
the list is cleared.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
Naming CDs
allocation “CD”.
To make it easier for you to recognise your
CDs, the car radio offers an individual name
option for 30 CDs. The names should have a
maximum of eight digits.
➮ Hold down the soft key 4 with the dis-
play allocation “ALL” until “MEMO CLR”
appears on the display.
If you attempt to allocate more than 30 names,
“FULL” will appear on the display.
All CD names have now been cleared.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Entering/altering CD names
➮ Listen to the desired CD.
➮ Press the soft key 4 with the display
allocation “NAME”.
This brings you to the edit mode. If the CD
you have selected is not yet known to the unit,
eight underlines will appear on the display.
The current input position flashes.
➮ Use the or buttons 7 to choose
your characters. Should a position re-
main blank, you select the underline.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
Fast search (audible)
For a fast search backwards or forwards
CD changer mode
(optional)
To find out which CD changer is compatible
with this unit, please see page 6 of this ma-
nual or consult your Blaupunkt dealer.
➮ keep the or buttons 7 pressed
until the fast search backwards or for-
wards begins.
Changing the display
In CD changer mode, you can switch between
the various display modes:
Note:
Information on handling CDs, inserting CDs
and operating the CD changer can be found
in the operating instructions accompanying
your CD changer.
➮
display of CD number and track num-
ber;
➮
display of CD number, track number
and playing time;
Switching to CD changer mode
➮ Press the CDC button =.
➮
➮
display of time and track number.
The CD changer menu appears on the dis-
play and playback is resumed at the point
where it was interrupted. If the magazine has
been removed from the CD changer and re-
inserted, the CD magazine will first be
scanned. Playback then begins with the first
track of the first CD the CD changer recogn-
ises.
display of CD name and track number.
To switch between the different display
modes,
➮ press the DIS button : repeatedly until
the desired information appears on the
display.
Note:
Selecting a CD
A CD name can only be displayed if a name
has been allocated to the inserted CD. Please
see the section “Naming CDs”.
To change up or down to a different CD,
➮ press the soft key 4 with the display
allocation of the desired CD (CD1 -
CD10). To do this, if necessary press
the soft key 4 with the display alloca-
tion “NEXT” to the “second page” of the
basic CD changer menu
Repeating individual tracks or
whole CDs (REPEAT)
➮ In CD changer mode, press the CDC
button =.
or
The CD changer function menu appears on
the display.
➮ press the or button 7 repeatedly
until the number of the desired CD ap-
pears on the display.
➮ Press the soft key 4 with the display
allocation “RPT”.
“RPT TRCK” appears briefly on the display.
To repeat play of the entire CD,
Selecting a track
To move up/down from one track to another
on the current CD,
➮ press the soft key 4 with the display
allocation “RPT” once again.
➮ press the or button 7 repeatedly
until the number of the desired track ap-
pears on the display.
“RPT CD” appears briefly on the display.
If the button 7 is pressed once, the cur-
rent track begins once more.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
Stopping REPEAT
Scanning all tracks on all CDs
(SCAN)
To listen in briefly to all the tracks on all in-
serted CDs in ascending order,
To stop the repeat function for the current
track or CD,
➮ press the soft key 4 with the display
allocation “RPT” repeatedly until “RPT
OFF” appears briefly on the display.
➮ press the button CDC button = while in
CD changer mode.
The CD changer menu appears on the dis-
play.
Random play (MIX)
To play the tracks on the current CD in ran-
dom order,
➮ Press the soft key 4 with the display
allocation “SCAN”
➮ press the CDC button = while in CD
“SCAN” appears in the display alongside a
flashing arrow symbol.
changer mode.
The CD changer function menu appears on
the display.
Stopping SCAN
To stop scanning,
➮ Press the soft key 4 with the display
allocation “MIX”.
➮ press the soft key 4 with the display
allocation “SCAN” once again.
“MIX OFF” appears on the display.
The track last scanned then continues to be
played.
➮ Select “MIX CD” using the button 7.
To play all tracks of all inserted CDs in ran-
dom order,
Note:
You can set the scanning time as required.
Please see the section “Setting the scanning
time” in the “Radio mode” chapter.
➮ select “MIX ALL” with the button 7.
Note:
In the case of CD changers CDC A 08 and
IDCA09, all CDs and all tracks in the chang-
er are randomly selected. All other changers
first play all the tracks on a CD in random
selection before moving to the next CD in the
changer.
Naming CDs
To make it easier for you to recognise your
CDs, the car radio offers an individual name
option for 99 CDs. The names should have a
maximum of seven digits.
If you attempt to allocate more than 99 names,
“FULL” will appear on the display.
Stopping MIX
➮ Select “MIX OFF” using the button
7.
Entering/altering CD names
➮ Press the CDC button = when in CD
changer mode.
The CD changer function menu is displayed.
➮ Press the soft key 4 with the display
allocation “NAME”.
➮ Select the CD you wish to name using
the
/
buttons 7 or the soft keys
4 “PREV” (previous) or “NEXT.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
This brings you to the edit mode. If the CD
you have selected is not yet known to the unit,
seven underlines appear on the display and
the current input position flashes.
Programming favourite CD tracks
With the TPM function (Track Programme
Memory), you can programme, store and play
your favourite tracks on a particular CD. No
matter what order the tracks are programmed,
they will always be played back in ascending
order. When playback of favourite tracks is
activated, only the previously programmed
tracks of the CD in the drive will be played.
Up to 30 CDs with a maximum of 40 tracks
each can be handled in CD mode.
➮ Use the
/
buttons 7 to choose
your characters. Should a position re-
main blank, you select the underline.
➮ User the or button 7 to change
the input position.
➮ Press the OK button 5 to store the
name.
Programming favourite tracks
Clearing a CD name
Proceed as follows to select your favourite
tracks on a CD:
➮ Press the MENU button 8 when in CD
changer mode.
➮ in the CD changer mode, select the CD
from which you wish to select your
favourite tracks;
➮ Press the soft key 4 with the display
allocation “CDC”.
➮ Select the CD whose name you wish to
➮ choose your first favourite track;
choose using the
/
buttons 7 or
➮ press the soft key 4 with the display
allocation “TPM” for more than one sec-
ond.
the soft keys “PREV” (previous) or
“NEXT”.
➮ Hold down the soft key 4 with the dis-
play allocation “CD” until ”CD CLR” ap-
pears on the display.
The track is now included in the list of favou-
rite tracks for this CD.
➮ Proceed in exactly the same way with
The CD name has now been cleared.
all your other favourite tracks on the CD.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Switching playback of favourite tracks
on/off
To call up the preset favourite tracks for the
inserted CD or to switch off playback of the
favourite tracks,
Clearing all CD names
➮ Press the MENU button 8 while in CD
➮ press the soft key 4 with the display
changer mode.
allocation “TPM”.
➮ Press the soft key 4 with the display
The current TPM status (“TPM ON” or “TPM
OFF”) appears briefly on the display. When
playback of favourite tracks is active, an ar-
row symbol lights up alongside “TPM” on the
display.
allocation “CDC”.
➮ Hold down the soft key 4 with the dis-
play allocation “ALL” until “MEMO CLR”
appears on the display.
All CD names have now been cleared.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER MODE
CLOCK
Clearing preset of tracks
CLOCK time
In order to clear individual tracks from the list
of favourite tracks for a CD,
Setting the time
➮ switch on TPM;
The time can be set automatically via the RDS
signal. In addition, you can also set the time
manually.
➮ select the track you wish to clear;
➮ hold down the soft key 4 with the dis-
play allocation “CLR” until “TR CLR” ap-
pears on the display.
Note:
The clock can be synchronised automatical-
ly via RDS only if the station that you are re-
ceiving supports this function.
The track is now cleared from the list.
Clearing the list of favourite tracks for a
CD
AUTOSYNC
To synchronise the time automatically,
➮ press the MENU button 8.
You can also clear the entire list of favourite
tracks for a CD. The CD for which you wish to
clear your favourite tracks must be in play at
the time of clearance.
➮ Press the soft key 4 with the display
allocation “CLK”.
➮ Switch on TPM.
➮ Press the soft key 4 with the display
allocation “SYNC” repeatedly until the
display reads “AUTOSYNC”.
➮ Hold down the soft key 4 with the dis-
play allocation “CLR” until “CD CLR” ap-
pears briefly on the display.
If “AUTOSYNC” is selected and the station
being received supports the RDS clock time
(RDS-CT) function, the clock will be set auto-
matically.
The list is now cleared.
If you do not want the clock time to be syn-
chronised automatically (for example, be-
cause you have set the clock to another time
zone),
➮ select “SYNCH OFF”.
Setting the clock time manually
➮ To set the clock time manual, press the
MENU button 8.
➮ Press the soft key 4 with the display
allocation “CLK”.
➮ Press the soft key 4 with the display
allocation “SET”.
The clock time will appear on the display. The
hours blink and can be set.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK
➮ Set the hours using the
7.
/
buttons
➮ Press the or button 7 to switch
between “CLK ON” and “CLK OFF”.
➮ Once the hours are set, press the
button 7.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
The minutes will blink.
➮ Set the minutes using the
7.
/
buttons
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Switching between 12- and
24-hour clock mode
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “CLK”.
➮ Press the soft key 4 with the display
allocation “MODE”.
➮ Press the or button 7 to switch
between 12- and 24-hour mode.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Permanent time display when unit
is off
To configure the unit to display the time per-
manently when the unit is off and the ignition
is on,
➮ press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “CLK”.
➮ Press the soft key 4 with the display
allocation “VIEW”.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DSA - DIGITAL SOUND ADJUSTMENT
Lining up the equaliser
DSA - Digital Sound
Adjustment
This unit is equipped with a digital sound-ad-
justment system. This consists of three self-
aligning, adaptable 7-band equalisers, a dy-
namic noise covering system (DNC) and five
sound presets.
automatically
You can line up the equalisers electronically
for three different situations, and store these
settings, e.g.:
EQ 1 for the driver alone
EQ 2 for the driver and front passenger
EQ 3 for car occupants in front and back.
The three 7-band equalisers (EQ1 - EQ3) are
each allocated two channels (left and right).
The equalisers EQ1 - EQ3 can be automati-
cally lined up with the aid of the microphone
supplied. The automatically read values can
also be altered manually. You also have the
option of setting the equalisers manually.
Hold the microphone in the appropriate posi-
tion during line-up.
The position of the microphone for situation
1 (example, driver alone) is directly on a level
with the driver’s head.
For situation 2, the microphone is between
the driver and the front passenger.
Switching DSA on/off
To switch the equaliser off,
➮ press the DSA button 6.
The setting last selected appears on the dis-
play.
For situation 3, the microphone should be in
the middle of the vehicle interior (left/right,
front/back).
It is a good idea to look for really peaceful
surroundings for lining up the system. Out-
side noises may distort the readings.
➮ Press the button 7.
Note:
“DSA OFF” appears on the display.
Output from the loudspeakers should not be
impaired by objects. All loudspeakers must
be connected up. The microphone must be
connected to the car radio. Please line up the
equaliser before you line up DNC.
➮ Press the DSA button 6. The settings
are now stored.
To switch the equaliser back on again,
➮ press the DSA button 6.
“DSA ON” appears on the display.
➮ Press the button 7.
To line up an equaliser,
➮ press the DSA button 6;
➮ select the desired equaliser using the
The setting last selected appears on the dis-
play before the equaliser is switched off.
/
button 7;
➮ press the soft key 4 with the display
➮ Press the DSA button 6. The settings
allocation “AUTO”;
are now stored.
Acountdown starts on the display. During this
time, you have the opportunity to position the
microphone. Lining up then takes place when
the countdown is over.
➮ Proceed in the same way with all the
equalisers.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DSA - DIGITAL SOUND ADJUSTMENT
Selecting an equaliser
After automatic or manual line-up,
➮ press the DSA button 6;
Setting the equalisers manually
We recommend you use a CD you are famil-
iar with when adjusting the equaliser.
Before adjusting the equaliser, set the tone
➮ select one of the equalisers EQ1, EQ2
or EQ3 using the button 7;
and volume balance to zero and deactivate
the loudness function. To do this, please see
the chapter “Audio settings”.
/
➮ press the OK button 5.
➮ Listen to a CD.
Select sound preset
You can preselect sound settings for the fol-
lowing musical styles:
➮ Evaluate the tone impression according
to your taste.
➮ Now consult the chart “An aid to adjust-
ing the equaliser” under “Sound impres-
sion”.
➮
➮
➮
➮
➮
ROCK
POP
JAZZ
➮ Set the equaliser values as described
CLASSIC
VOCAL
under “What to do”.
Programming the settings
The settings for these musical styles are pre-
programmed.
➮ Press the DSA button 6.
➮ Select one of the equalisers EQ1, EQ2
or EQ3 using the or button 7.
➮ Press the DSA button 6.
➮ Select the desired sound preset using
the or button 7.
➮ Select the left or right channel by press-
ing the “LEFT” or “RGHT” soft key.
➮ Press the OK button 5.
To select the frequency,
➮ press the or button 7;
➮ set the frequency level using the or
button 7;
➮ select the settings for both channels as
described above;
➮ press the OK button 5.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DSA - DIGITAL SOUND ADJUSTMENT
Setting aid for the equaliser
Sound impression/problem
What to do
Bass reproduction too weak
Raise bass with
frequency: 64 to 160 Hz,
level: +4 up to +6 dB
Impure bass
Booming
Reduce lower mid-section with
frequency: 400 Hz,
Disagreeable pressure
level: approx. -4 dB
Sound very dominant,
aggressive, no stereo effect
Reduce mid-section with
frequency: 1,000 to 2,500 Hz,
level: -4 up to - 6 dB
Muffled reproduction
Low transparency
No instrumental brilliance
Raise tweeter range with
frequency: 6,250 to 15,600 Hz,
level: +2 up to +4 dB
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DNC - DYNAMIC NOISE COVERING
Switching DNC line-up on/off
To switch DNC line-up off,
DNC - Dynamic Noise
Covering
➮ press the DSA button 6;
Dynamic Noise Covering – masking of vehi-
cle noise.
➮ press the soft key 4 with the display
allocation “DNC”.
When your vehicle is in motion, the DNC sys-
tem raises the radio volume to the volume
you consider pleasant when your vehicle is
stationary.
The last selected DNC increase appears on
the display.
➮ Press the button 7.
The volume is raised depending upon fre-
quency ranges and noise development inside
the vehicle.
“DNC OFF” appears on the display.
➮ Press the DSA button 6. The settings
are now stored.
As a result, volume and sound remain agree-
able even when vehicle noise changes. Short-
term noises, such as those arising when you
cross a railway track, are not taken into ac-
count.
To switch DNC back on again,
➮ press the DSA button 6;
➮ press the soft key 4 with the display
allocation “DNC”.
“DNC ON” appears on the display.
Lining up DNC
➮ Press the button 7.
For operation to suit your vehicle, the system
must be lined up using the special micro-
phone. Please do not line up DNC until you
have aligned the hifi. The microphone should
be permanently mounted near to the console
using the self-adhesive tape provided, how-
ever not in the leg area, in resounding places
or near the fan/heater vents.
The microphone mouthpiece should point
towards the passenger area. It is best to line
up the system in a quiet place with the en-
gine switched off.
The DNC increase last selected before switch-
ing off appears on the display.
➮ Press the DSA button 6. The settings
are now stored.
Setting the DNC increase
You can set the DNC increase, i.e. the sensi-
tivity with which the volume and tone are
raised, in five steps.
The “DNC 1” setting is suitable for vehicles
with a loud engine and heavy-bass music. The
“DNC 5” setting is for vehicles with a quiet
engine and classical music. Experiment with
the settings to find the one you prefer.
Starting DNC line-up
➮ Press the DSA button 6.
➮ Hold down the soft key 4 with the dis-
play allocation “DNC” until “DNC ADJ”
appears on the display.
To set the DNC increase,
➮ press the DSA button 6;
➮ press the soft key 4 with the display
DNC line-up now begins. Once “DNC 3” ap-
pears on the display, line-up has been com-
pleted.
allocation “DNC”;
➮ select the desired increase using the
or button 7;
➮ Press the OK button 5.
➮ press the OK button 5.
➮ Once you have completed all settings,
press the DSA button 6.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
TMC
PRE-AMPLIFIERS
TMC for dynamic
navigation systems
Pre-amplifiers
External pre-amplifiers and a subwoofer can
be connected via the appropriate lines of your
car radio.
We recommend the use of matching prod-
ucts from the Blaupunkt or Velocity ranges.
TMC denotes “Traffic Message Channel”. Traf-
fic announcements are transmitted digitally
via TMC and can therefore by used by suit-
able navigation systems for route planning.
Your car radio has one TMC output for con-
nection to Blaupunkt navigation systems. Your
Blaupunkt dealer will tell you which naviga-
tion systems can be used with your car radio.
Switch-on delay for external pre-
amplifier
You can define a switch-on delay for pre-am-
plifiers connected to the pre-amp output line.
The switch-on delay can be set at between
250 ms (“DELAY 1”) to 2.25 seconds (“DE-
LAY 9”).
When a navigation system is connected and
a TMC station received, “TMC” lights up on
the display.
➮ Press the MENU button 8.
➮ Press the soft key 4 with the display
allocation “VAR”.
➮ Press the soft key 4 with the display
allocation “DLAY”.
➮ Press the or button 7 to set the
switch-on delay.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBOUT/SUBWOOFER
Subout/subwoofer
HIGH-PASS FILTER
High-pass filter
Setting the frequency and level
for the subwoofer
You can set the frequency and amplifier level
for a connected subwoofer. The settings you
make depend on the hifi system in your car
and the power of your subwoofer. Experiment
to find your ideal setting.
Setting the high-pass filter
If a subwoofer is connected to your car radio,
you can use a high-pass filter (HP-F) to sup-
press the output of lower frequencies through
the internal final amplifier and an external pre-
amplifier that may be connected. This filter
has five adjustment levels. The settings de-
pend on the unit installed in your car. Experi-
ment to find your ideal setting.
➮ Press the AUD button 9.
➮ Press the soft key 4 with the display
➮ Press the AUD button 9.
allocation “NEXT”.
➮ Press the soft key 4 with the display
➮ Press the soft key 4 with the display
allocation “NEXT”.
allocation “SUB”.
➮ Press the soft key 4 with the display
➮ Press the or button 7 to select
between the frequencies “80 Hz” and
“100 Hz”.
allocation “HP-F”.
➮ Press the or button 7 to switch
the high-pass filter on/off.
➮ Set the desired amplifier level using the
or button 7.
When the high-pass filter is activated,
➮ select the desired amplifier filter, “FIL-
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
TER1” - “FILTER5” using the
or
button 7.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL AUDIO SOURCES
External audio sources
TECHNICAL DATA
Technical data
Instead of the CD changer, you can also con-
nect up a different external audio source with
a line output. Such sources can be, for exam-
ple, portable CD players, MiniDisc players or
MP3 players.
Amplifier
Output power:
4 x 25 watts sine in
accordance with
DIN 45 324 at 14.4V,
4 x 45 watts max.
power
The AUX output has to be switched on in the
install menu.
To connect up an external audio source, you
will need an adapter cable, obtainable from
any Blaupunkt dealer.
Tuner
Frequency ranges:
FM :
Switching the AUX input on/off
87.5 – 107.9 MHz
530 – 1 710 kHz
AM :
➮ Hold down the MENU button 8 until
the install menu appears on the display.
FM transmission range:
30 - 15 000 Hz
➮ Press the soft key 4 with the display
allocation “AUX”.
When “AUX” appears on the display, the in-
put is already activated.
CD
Transmission range:
➮ Press the or button 7 to switch
20 - 20 000 Hz
5 V / 10 kΩ
AUX on or off.
➮ Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Pre-amp output
4 channels:
AUX input
Input sensitivity:
Note:
When theAUX input is switched on, it can be
selected using the CDC button =.
1,2 V / 10 kΩ
Subject to changes!
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Service numbers / Numéros du service après-vente /
Números de servicio / Número de serviço
Tel.:
Fax:
Deutschland
Belgique / België
France
Nederland
Great Britain
Ireland
Danmark
Sverige
Norge
0 18 05 00 02 25
02.525. 54.44
014 010 70 07
023 565 63 48
018 958 383 66
(01) 4149400
44 89 83 60
0 51 21 49 40 02
02.525.54.48
014 010 73 20
023 565 63 31
018 958 383 94
(01) 4598830
44 89 86 44
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Suomi
Österreich
094 359 91
01 610 39 0
015 762 241
094 359 92 36
01 610 39 391
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt-Werke GmbH
Bosch Gruppe
09/00 TRO
K7/VKD 8 622 402 514
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution!
Important notice for customers in USA:
San Francisco CD70
To ensure that the radio mode on the San Francisco CD70
unit works correctly, the first time you use the radio you have to
configure the tuner to receive radio stations in the USA.
To do so, proceed as follows:
When operating the unit for the first time, the “INSTALL” menu
appears in the display.
➮ Press the softkey that is labeled in the display as “TUNE”
➮ Press the or key until “US” appears in the top row of the
display.
➮ Now press the MENU button or OK.
If your unit has already been used and you want to configure
the tuner:
➮ Keep the MENU button pressed down until the “INSTALL”
menu is displayed (approx. 4 seconds).
➮ Proceed as described above.
Thank you, your unit is now ready for radio reception in your
country. Please read the enclosed operating instructions to find
out how to operate your unit and for further information when
using it for the first time.
8 622 402 595
Download from Www.Somanuals.com. All Manuals Search And Download.
|