Contents
Key Features: .........................................
4
4
4
Station
Automatic (seek) tuning
Manual tuning with
RDS Seek (only
Changing the memory bank (FM).
tuning ........................................
14
14
14
15
15
15
Switching the tape side (autoreverse). . 19
IV-US Tuner Features:.
..............
............
.................
FM) .............................
Tape equalisation .................................
Scanning cassette tracks with SCAN..
19
20
20
Audio Features: ......................................
Cassette Features: .................................
.
4
Dolby
B
..........................................
DMS CD Changer Control Features:
..... 4
........
Skipping unrecorded tape portions
with Blank Skip .....................................
Listening to the radio during fast tape
Other Features:. ......................................
4
Storing
stations .....................................
20
Automatically storing the strongest
stations with Travelstore..
Recalling stored stations
Scanning stored stations with
Preset Scan
Scanning stations with Radio-Scan..
Changing the scan time..
Selecting the seek tuning sensitivity
Switching from stereo to mono (FM)
PTY Program Type
............................
Switching
Program
Checking the program type of the
station
Displaying the selected program type 17.
Selecting a program type
Storing
Quick reference ..............................
5
.....................
......................
15
15
winding with RM (Radio Monitor)
......... 20
Care notes ............................................
20
Important notes ............................ 11
Precautions ...........................................
Traffic safety .........................................
Installation.. ...........................................
Telephone mute.. ..................................
Accessories ..........................................
11
1 1
CD changer operation (optional) 21
..........................................
16
16
16
16
16
16
16
17
Switching to CDC operation
................. 21
....
Selecting CDs and tracks
..................... 21
......................
11
1
MIX playback ........................................
21
.................. 21
....
....
Selecting the display mode
Storing the display mode
...................... 22
theft protection
SCAN operation ....................................
Entering CD names ..............................
Deleting CD names with
22
22
system ...........................................
12
PTY on/off.........................
types ...................................
Putting the unit into operation
.............. 12
........................ 12
.......................... 12
......................... 12
Removing the
Replacing a
Loss of both
DSC-UPDATE ......................................
22
................................................
17
DSC programming
....................... 23
..................
program types .......................
17
18
Displaying the radio pass data
Optical indication for extra
............. 13
Overview of the DSC factory
settings.. ................................................
25
Scanning stations with
Emergency Alert System..
... 18
.................
security.. ................................................
13
13
18
Appendix .......................................
26
Care of your
...........................
.......
RDS ........... 14
Specifications.. ......................................
26
Tape operation
.............................
19
Switching the audio source
Inserting a tape
Removing
Fast Forward/Rewind
Selecting tracks with
.....................................
a tape...................................
19
19
19
19
Radio operation with
AF Alternative frequency..
...........................
.................
.................. 14
Selecting a
.......................... 14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Here is a recap of feature highlights:
Congratulations on your purchase of this
Blaupunkt Cassette Radio with CD Chang-
warning for USA
The equipment has been tested and found
to comply with the limits for a Class B de-
vice, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide rea-
sonable protection against harmful interfer-
ence in a residential installation. This equip-
ment generates, uses, and can radiate ra-
dio frequency energy, and, if not installed
and used in accordance with instructions,
may cause harmful interference with radio
communications. However, there is no guar-
antee that radio interference will not occur
in particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be deter-
mined by turning the equipment off and on,
the user is encouraged to contact the deal-
er or an experienced Radio/TV technician
for help.
You are cautioned that any changes or mod-
ifications not expressly approved in this
manual could void your authority to operate
this equipment.
The shielded interface cable recommended
in this manual must be used with this equip-
ment in order to comply with limits for a dig-
ital device pursuant to Sub-part B of Part 15
of the FCC rules.
Key Features:
er Control. Its
IV-US RDS tuner and
full-featured cassette deck provide the ulti-
mate in sound reproduction. Its high-power
amplifier and 4-Channel preamp output pro-
vide you with versatility in configuring your
car audio system. In addition, Blaupunkt’s
exclusive Direct Software Control menu al-
lows you to customize many of the features
to your specific personal preferences. And
no other company offers radios with either
VarioColour Illumination or the
Security System with 2
Cards
Each
also holds separate Preset,
Audio and DSC Settings
Flashing LED “Tongue” Warning System
Window Decals
VarioColour Illumination
Brightness and Viewing Angle Adjustment
17 Direct Software Control Menu Options
Wireless Remote Control Ready
Security System.
IV-US Tuner Features:
RDS (Radio Data System) Reception
Station Call Letter Display
PTY Program Type Seek
AF Alternative Frequency Search
Emergency Alert System Capability
Multipath Management
18 FM/6 AM Presets, including 6 FM/6 AM
Presets
Station Scan Preset Scan
3 lo and 3 dx Tuning Sensitivities
ASU Electrical Impulse Noise Suppression
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference
After the ignition has been switched
off, a double beep tone will remind you
Switching on/off at a ON button:
Press ON.
When switching the set on with the ON
Audio Features:
35 x 4 Watts Peak Internal
Dual-Level Fader
V Preamp Out w/75 Ohm
Resistance
Switchable Auxiliary Input
rove the
that you should
before leaving your vehicle.
button, the
has to be insert-
ed. The unit will play with the pre-
adjusted volume.
Switching on with the ignition being
switched off:
To keep on operating the set when the
Cassette Features:
ignition is switched off
is in-
serted), proceed as follows:
Press ON after the double beep tone.
The unit will be turned-on.
Soft-Touch, Full-Logic Deck
Super CPS Program Search
Tape Scan Blank Skip
Dolby B Noise Reduction
Tape Equalization
Switching on/off with the
Turn the unit ON.
Make the orange tongue stick out by
pressing it into the radio so that it pops
DMS CD Changer Control Fea-
tures:
out. Insert the
into the slot
To alter the volume.
Controls Blaupunkt CDC-A05 or
A071 Changer
Disc Naming
with the gold contact facing up and the
arrow pointed into the unit.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).
Track Scan
MIX CD
MIX MAG
Note:
Read the information in chapter
Card theft protection system”.
Other Features:
Switching on/off via the ignition:
When connected correspondingly, the
set can also be turned on and off via
the vehicle ignition.
For instantly muting the volume.
Quick-Release Wire Harness
DIN Chassis, Bracket Hardware
Dimensions 179 x 50 x 150 mm
By pressing the
button the volume
will be muted immediately. “MUTE” will
appear in the display.
The function is cancelled by pressing
button or VOL+.
Designed, Engineered and Manufactured
by
in Germany
5
When pressing VOL-, the normal vol-
ume will be by one grade lower than
the mute volume.
AMT
AM switch
Operation
0
To program the mute volume level,
proceed as follows:
Extra function AMT
To store the six most powerful stations
automatically with Travelstore:
Press AMT until you hear a beep or
“T-STORE” appears in the display.
l
Adjust the desired volume.
l
Press
for two seconds until you
hear a beep.
Track selection (S-CPS)
Up
Down
Now this volume level is stored as your
mute volume.
Rocker switch
>>
Fast forward
Fast rewind
Extra function
<<
Memory storing button in the DSC
menu.
Stop function by pressing
Press repeatedly to switch between
the FM memory banks I, II and T
(Travelstore).
When pressing this button, the system
will automatically switch to FM.
Station search (seek tuning)
Down
Up/Down in short intervals when AF
is off (manual tuning)
Extra function
To store the six most powerful stations
automatically with Travelstore:
Press FMT until you hear a beep or
“T-STORE” appears in the display.
When AF is on, press
to
seek previously-turned RDS sta-
tions. Once RDS stations have
been turned in by radio, they are
added to this RDS seek table.
e.g. WNEW, WNYC-FM, THE
WAVE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo
Alternative frequency for
RDS operation
Program type function
Dolby B noise reduction
Display
Chanaer ooeration
k) AF
PTY
a
A metal or
ing played
Radio-Monitor (to listen to
the radio during fast tape
winding)
type is be-
n) MTL
RM
I
e
k
b
m
CD Disc selection
Blank-Skip (to skip un-
recorded tape portions)
CD playback in random
order
p) BLS
q) MIX
up
P o n
Down
Track selection
Upwards: Press briefly.
CUE fast advance (audible):
Keep depressed.
theft protection
To operate the set it is necessary that
the is inserted.
d
v
Downwards: Press as many times
as required.
To restart a track: Press briefly.
REVIEW -fast reverse (audible):
Keep depressed.
Station name
Track (side) 2 of the cas-
sette
a) WNEW
CD name or
VIVALDI
d) 1 : 52
Extra rocker switch functions:
Further setting functions with
For this purpose, introduce the
Card (with the contact area showing
up) into the slot above the tongue
sticking out of the unit.
To remove the card, press first to un-
lock.
CD time (playback time)
and number for changer op-
eration (optional)
AUD
e) FM
f) lo
DSC MODE
PTY
Seek tuning sensitivity
Memory bank I, II or
store
Preset button (l-6)
Loudness
14
g)
T
Condition: The corresponding function
has to be activated.
Read also the information in chapter
theft protection system”.
6
i) LD
7
lo
“‘Flashing
tongue
When the radio is turned off and the
removed, the
To switch the seek tuning sensitivity
level:
Radio ooeration
Press button briefly.
To switch between mono and stereo
reception:
Press button for approximately two
seconds (beep).
The stereo symbol
mono playback.
tongue can be programmed to flash for
optical theft protection.
For more information see chapter
“DSC programming”.
This flashlight can be switched off by
pushing in the tongue and lock.
Scan
Press SC briefly
“FM SCAN” and the name of the
scanned station will alternately appear
in the display. The unit will scan all
stations which can be received.
To stop, press SC again.
will disappear for
MIX
Preset Scan
Cassette operation
Chanaer
MIX CD
operation (optional)
Press PS, ‘SCAN” and the name of the
scanned station will alternately appear
in the display. The unit will scan all sta-
tions stored on the preset buttons.
To stop Preset Scan:
Cassette-Scan
Press SC.
“CC-SCAN” will appear in the display.
All CC tracks will be scanned briefly.
To stop CC-Scan:
The CD tracks will be played at ran-
dom.
The individual discs are selected in nu-
meric order.
Press PS once again.
Press SC once again.
AF
MIX MAG
The CD tracks will be played at ran-
dom.
The individual discs are also selected
in random order.
Chanaer operation (optional)
Alternative frequency during RDS op-
eration:
When
system will automatically look for a fre-
quency offering better reception of the
same RDS program.
CD-Scan
Press SC.
“CDC-SCAN” will appear in the dis-
lights up in the display, the
play.
MIX OFF
The Mix function is deactivated.
All CD tracks will be scanned briefly.
AF on/off: Press AF briefly.
To stop CD-Scan:
Press SC once again.
Press MIX as many times until the de-
sired function briefly appears in the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
corresponding memory bank. Then
press the relevant preset button briefly.
Chanaer operation (optional)
PTY (Program Type)
In the PTY mode, the preset buttons
become program type buttons. With
each preset you can select one pro-
gram type, such as for example
NEWS, SPORT, ROCK, CLASSICL,
etc.
To switch the display mode and select
between name, time (playback time)
and number (disc number):
Extra function for preset buttons
To store and recall a PTY program
l
Press
briefly.
type.
On FM, vou can store and recall one
program-type on/from each preset but-
ton when PTY is active (“PTY”
lights up in the display).
(Radio Monitor)
Press this button to listen to the radio
while fast forwarding or rewinding the
tape.
To switch RM on/off: Press RM.
When this function has been activated,
“RM” shows on the display panel.
The radio is played back during fast
tape run.
SRC (source)
You can switch between the different
audio sources radio, tape, and
AUX (if activated).
Cassette loading slot
Insert the tape with side A or 1 facing
up, the open side showing to the right.
DIS
Tape side selector
Radio ooeration
Press this button to switch over to the
other side during tape operation. The
display shows “TR 1” or “TR 2”.
When an RDS station is received,
press the
button and the frequen-
to eject the tape.
cy will be displayed for approximately
four seconds.
1,
4, 5, 6 preset buttons
On FM, you can store six stations for
each of the memory banks I, II and T.
On AM, you can store six stations.
To store a station: Press a preset
button during radio operation and hold
down until the set resumes play after
the muting and you hear a beep.
Dolby B
Press this button to play back a tape
which has been recorded with Dolby-B
noise reduction. When this button is
pressed, “B“ lights up in the display.
Noise Reduction system manufactured under li-
cense from Dolby Laboratories Licensing Cor-
poration, “Dolby“ and the double-D symbol are
trademarks of Dolby Laboratories Licensing
poration.
When pressing the DIS button, the sta-
tion name or frequency will be dis-
played for approximately four seconds.
To recall a station: Select the desired
waveband. On FM, also adjust the
AUD
Loudness When listening at a low
level, the Loudness function creates a
more natural sound by boosting the
low frequency range.
To adjust the balance (left/right) and
fader (front/rear) with the rocker
switch.
To adjust the treble and bass
with the rocker switch.
LD on/off: Press the button.
When the Loudness function is active,
will light up in the display.
See chapter
programming” for
more information.
Treble +
V
Treble
B a s s
B a s s
Fader front
DSC (Direct Software Control)
Use the DSC function to
certain programmable, basic settings
to suit your personal needs and prefer-
ences. See chapter “DSC
V
Fader rear
Balance left
Balance right
+
>>
The last setting will be stored automat-
ically.
To switch off AUD: Press button once
again.
If the setting remains unchanged with-
in four seconds, the AUD setting will
be terminated automatically.
The last setting will be stored automat-
ically.
To switch off GEO: Press button once
again.
If the setting remains unchanged
within four seconds, the display will
switch back to the previous condition._
for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Important notes
Installation
Remote control
Precautions
With the infrared steering wheel remote con-
trol and its signal-receiving apparatus you
can control all of the important functions of
your car audio system from the steering
wheel.
If you would like to install your new car ster-
please read the following information care- eo yourself or add other audio components
Before starting to use your new car radio,
to existing ones, then please read carefully
the enclosed instructions on installation and
connection.
In order to ensure that the set operates prop-
erly it is necessary that the positive power
supply line is connected via the ignition and
fully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
radio in a way that could distract you.
Please keep in mind that you travel a dis-
tance of 15 yards per second at a speed of
only 30 miles per hour.
the permanent
Do not ground the loudspeaker outputs!
V lead.
Telephone mute
Should the traffic situation become particu- If you have a mobile telephone installed in
your vehicle, radio, tape or changer play-
back can be muted automatically when us-
larly demanding, we advise you not to use
the radio.
Always make sure that you are still able to ing the phone (telephone mute).
hear any warning signals coming from out- “PHONE” will then appear in the display.
side of the vehicle, such as police or fire
Amplifier
All Blaupunkt amplifiers
engine sirens, so that you can react ac-
Accessories
cordingly.
Auxiliary Input 7 607 890 093
Adapter for portable audio equipment, for
example.
Use only the accessories and spare parts
Therefore, you should always select a
approved by Blaupunkt.
moderate volume for playing your car radio
while you are driving.
You can use the following Blaupunkt prod-
Speakers
All Blaupunkt speakers
ucts with this car stereo:
Changer
CDC A 05 or CDC A 071
theft protection system
Replacing a
Putting the unit into operation
The Blaupunkt
Security System
provides an effective and convenient means
of theft deterrence. Each unit operates only
when it’s own card is inserted. No card, no
use. It’s that simple.
1. Insert the remaining
on the set.
and turn
Turn the unit on.
2. Make the orange tongue stick out by
pressing it into the radio so that it pops
out.
2. Press the DSC button and select
“LEARN KC” with
The units flashing tongue and security sys-
tem window stickers emphasize that point
to the potential thief. No bulky release pan-
el to put in your pocket under your seat
3. Press
The display will switch to “CHANGE”.
4. Push in the The card is re-
or
3. Insert the
into the slot with
the gold contact facing up and the ar-
row pointed into the unit.
where thieves know to look for it. Just re- The car radio is now ready for operation.
move the card and put in your wallet or pock-
leased and put in the proper position
for being removed.
If a wrong
is inserted, then “CARD
et. It’s that convenient.
ERR” will appear in the display. In this case
5. Remove the first
and insert
This unit is supplied with two Keycards, a please do not make any further adjustments.
blue “main” card and “screamer” card. The The system will switch off after approxi-
the new one while “CHANGE” is still
being displayed.
difference: the
number (the mately ten seconds. When inserting anoth-
After the display indication “READY” or
“LEARN KC”,
“radio pass data”) has been embedded into er card type (e.g. phone or credit card), the
the main card in case you ever need it.
display will show “WRONG KC” for approx-
imately two seconds.
6. press DSC.
In addition to convenient security, each card
has a personal memory bank for the FM1
and AMT band presets, bass, treble, bal-
ance, fader and DSC settings. The benefit:
two drivers, such as a husband and wife,
can store separate settings to their individ-
ual likings on their separate cards.
Now you can also use the new
for
4. Remove the wrong card and introduce
operating your unit.
A maximum of two cards can be used for
the set.
the correct
after the display
indications “CARD ERR” or “WRONG
KC” disappear.
When trying to “train” a third one, the ac-
5. Press ON to turn the set on.
cess authorisation for the
not used
for the “training” process will be deleted
automatically.
To replace a lost or stolen card, please
call l-800-920-21 21.
Removing the
Never pull out the
First, slightly push in the
directly!
Loss of both
l
Please contact your dealer or in USA call
I-800-920-21 21.
This releases the card and puts it in the
proper position for being removed.
l
Now you can pull it out.
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the audio source
Turning off the blinking LED
Displaying the radio pass data
Using the SRC button you can switch be-
tween the following audio sources:
When you insert your
the LED is
Using the
supplied with your
automatically turned off until the card is re-
moved and the ignition turned off, assum-
ing the unit is connected as described in the
installation instructions.
If you do not want the tongue to blink at any
time, simply access “LED” in the DSC menu,
radio,
set you can have the radio pass data such
as the model name, product number (7 6 . ..)
and serial number indicated on the display
panel.
Please refer to chapter “DSC programming
READ KC”.
tape,
changer (optional), or AUX
Tape operation is only available if a cassette
is inserted.
AUX is only available if no Blaupunkt chang-
er CDC A05 or CDC A 071 is connected.
“AUX ON” must be activated in the DSC
menu.
and press
or
to turn in off.
Optical indication for extra
security
Care of your
For a proper function of the
important that the contacts are free from any
foreign particles. Avoid direct skin contact.
If necessary, clean the
using a cotton swab soaked with alcohol.
it is
Blinking
tongue
To switch to another source,
l
press SRC briefly.
When the vehicle is stationary and the
Card removed, the
switched to blink for extra anti-theft
rity.
tongue can be
contacts
For this it is necessary that the positive pow-
er supply line and the permanent
V lead
are connected such as described in the in-
stallation instructions.
Be sure that “LED ON” is adjusted in the
DSC mode.
If required, please refer to chapter “DSC
programming LED”.
Radio operation with RDS (Radio Data System)
stored frequencies, the unit is automatically
is equipped to receive Radio Data
System or RDS signals. RDS is a
ary signal used by many FM radio stations
to broadcast additional information.
punkt has been a key player in developing
RDS in Europe.
searching for an alternative frequency.
“SEARCH” will disappear from the display
when the alternative frequency has been
found or after the frequency band has been
run through completely.
If the reception quality of the selected pro-
gram becomes too bad:
This radio’s RDS features include program
service name (PS), which automatically dis-
plays RDS station’s identification such as
WNYC-FM or THE WAVE. Other RDS fea-
tures included are alternative frequency
switching (AF), program type identification
and search (PTY), and capability to receive
future Emergency Alert System (EAS) mes-
sage broadcasted by RDS stations. All are
explained in this section.
Seek tuning
l
Tune into another station.
v D o w n
Down in
intervals
must be switched off)
Up in short intervals
must be switched off)
Selecting a
With this car radio you can select between
the following wavebands:
FM 87.5 107.9 MHz
Manual tuning with
You can also tune in a station manually.
l
Select the desired
by
Condition:
ing the FMT or AMT button.
AF Alternative frequency
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected program is always
tuned in automatically.
Station tuning
If necessary, deactivate these functions:
Automatic (seek) tuning A/V
l
Press
or PTY.
l
Press A/V; the car radio will
search for the next station.
This function is activated when
in the display.
appears
Manual tuning:
Press
When keeping the upper or lower part
of the rocker switch depressed, seek tuning
will speed up in upwards or downwards
l
the frequency will change
In order to switch this function on or off,
press the AF button briefly.
in short intervals in downwards or
wards direction.
l
While searching for the strongest reception
signal, the radio may switch to mute briefly.
If “SEARCH” appears in the display when
switching on the radio or recalling one of the
When holding the right or left
er switch down, the frequency movement is
speeded up.
of the rock-
Download from Www.Somanuals.com. All Manuals Search And Download.
14
RDS Seek (only FM)
Storing stations
Automatically storing the
strongest stations with
store
You can use the
buttons to tune in
On FM, you can store six stations on the
preset buttons 1-6 for each of the memory
banks I, II and T.
RDS stations.
For this it is necessary that the stations have
been tuned in at least once and that
active (lights up in the display).
A quick way to tune in RDS stations is to
use Travelstore:
You can automatically store the six most
powerful FM and AM stations of your cur-
rent reception area sorted according to their
signal strength. This function is particularly
convenient on longer trips.
is
On AM, you can store six stations.
l
Select the appropriate
FMT or AMT.
with
l
Tune in a station with the rocker switch
(either automatically or manually
l
Press FMT for two seconds; the sys-
tem starts to run through the frequency
band.
l
Press the FMT or AMT button for two
seconds.
“T-STORE” will appear in the display.
The six strongest FM or AM stations will be
automatically stored on the memory bank
(Travelstore). When this process has
been completed, the radio will play the first
station.
If desired, stations can also be stored
manually on the Travelstore bank (see “Stor-
ing stations”).
l
Press the desired preset button until
the radio resumes play after the mut-
ing (takes approximately two seconds,
confirmed by beep).
If
is not displayed,
l
press
With this, the requirements for selecting sta-
tions with are fulfilled.
Now the station has been stored.
The activated preset button is indicated in
the display.
Changing the memory bank (FM)
You can shift between the memory banks I,
II and T in order to store stations and recall
them later.
The currently selected memory bank is in-
dicated in the display.
Notice:
Should you tune in a station which has al-
ready been stored before on another
memory bank, the corresponding preset
button and the memory bank will briefly flash
in the display.
Recalling stored stations
You can recall any stored station at the touch
of a button.
l
Press the FMT button as many times
until the desired memory bank lights
up in the display.
l
the
On FM, also choose the corre-
sponding memory bank by pressing
the button as many times until the
by pressing FMT
or
desired bank appears in the display.
l
Press the corresponding preset button
briefly to recall the station.
15
Switching from stereo to
If no station is selected, the scan function
will be automatically switched off after the
frequency band has been run through com-
pletely. The unit will tune in the station lis-
tened to before starting the scan.
Scanning stored stations with
Preset Scan
reception is poor, you may get better
sound quality by switching to mono:
You can have all of the stored stations briefly
scanned on all wavebands.
l
Press the lo button for approximately
To start Preset Scan:
two seconds.
With mono playback, the stereo Sign
disappear from the display.
Each time the radio is switched on, stereo
playback is activated.
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.
l
Press SC for approximately two sec-
onds.
Changing the scan time
The scan time can be changed from be-
tween five to a maximum of 30 seconds.
Please refer to chapter “DSC programming
SCANTIME”.
All of the stored stations of the adjusted
will be scanned one after the oth-
er. The memory bank and preset position of
the currently scanned station will flash in the
display.
Selecting the seek tuning sensi-
tivity
To select a scanned station and switch
off Preset Scan:
PTY Program Type
You can alter the automatic seek tuning
sensitivity.
l
Press SC briefly.
PTY is an RDS service offered by more and
more radio broadcasters. This feature allows
you to select FM stations according to their
program type. After you have chosen the
PTY of your preference, the corresponding
stations can be selected either by seek
tuning or using the scan function.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, distant stations (high sen-
sitivity).
The sensitivity level can be altered in both
modes (see also chapter “DSC program-
ming”).
Scanning stations with
Scan
You can also scan all stations which can be
received.
To start the Scan function:
l
Press SC briefly.
Switching PTY on/off
The scanned frequency or the station name
will start flashing in the display. During the
actual scanning process “FM-SCAN” or
“AM-SCAN” will be displayed.
To select a scanned station and switch
off the Radio-Scan function:
l
Press PTY.
When the function is active, the program
type selected last will briefly appear in the
display. “PTY” will be permanently indi-
cated in the lower right corner of the display
panel.
l
Press SC briefly.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
If you wish to listen to a station with
this PTY,
REL MUSC
REL TALK
PERSNLTY
PUBLIC
Program types
Use
to have the last selected program
l
press
to start seek tuning op-
type displayed and to choose a new one.
You can select any one of the stored types
with the preset buttons 1 6.
Condition: PTY must be active.
All of the program types listed below are
available.
eration.
TEST (used for factory testing)
If the system is unable to find a station of-
fering the selected program type, the
play will show “NO PTY” and a beep tone
will be released. The station received be-
fore starting seek tuning will be tuned in.
You can assign different program types to
each preset position. Please refer to the next
chapter “Storing program types”.
PTY 23 to
29 have not been assigned.
Checking the program type of the sta-
tion
The letters printed in bold are identical to
the actual short-time indication in the dis-
l
Press PTY for approximately two sec-
onds.
play.
NEWS
INFORM
SPORTS
TALK
After the beep tone the display will show the
program type offered by the tuned in sta-
tion.
Using the
switch
buttons of the rocker
When PTY is switched on, you can se-
lect a program type using buttons
<<
ROCK
CLS ROCK
ADLT HIT
SOFT RCK
TOP 40
COUNTRY
OLDIES
SOFT
Displaying the selected program type
l
l
l
Press cc or
selected last will be displayed for
three seconds.
the program type
l
Press
or
The program type selected last will be dis-
played briefly.
During this period press
wards) or (backwards) to select
the desired type.
(for-
Selecting a program type
NOSTALGA
JAZZ
Using the preset buttons
Press
or
as many times as
When PTY is switched on, you can use
the preset buttons l-6 to select the
program types stored at the factory.
required.
R & B
SOFT R&B
LANGUAGE
If you wish to listen to a station offering
the selected PTY,
l
Press one of the presets 1 6.
l
press
to start seek tuning op-
The selected program type will be dis-
played for two seconds.
eration.
17
Scanning stations with PTY-SCAN
system is unable to find a station of-
fering the selected program type, the dis-
play will show “NO PTY” and a beep tone
will be released. The station received be-
fore starting seek tuning will be tuned in.
Condition: “PTY” must appear in the display.
l
Press the SC button.
All received stations offering the selected
program type will be scanned.
To switch off PTY-SCAN:
Storing program types
l
Press SC once again.
One program type was assigned to each of
the preset buttons l-6 at the factory.
If desired, you can also store other availa-
ble program types.
To do so, make sure that “PTY” lights up in
the display.
Emergency Alert System
Your RDS tuner is also able to automatical-
ly receive any RDS emergeny announce-
ments broadcast during extraordinary cir-
cumstances.
l
If necessary, press the PTY button to
switch on the function.
l
l
Select a program type using buttons
and
hold down the desired preset button
(l-6) until you hear a beep.
Now the selected program type can be re-
called by pressing this preset. For this the
PTY function must be active.
Notice:
As earlier mentioned, these functions are
currently only supported by a limited number
of RDS stations.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Tape operation
The car stereo has to be switched on.
Fast Forward/Rewind
portion of at least three seconds between
the individual tracks.
The unit automatically switches to tape op-
eration when a cassette is inserted.
Switching the tape side
(autoreverse)
Inserting a tape
To change the tape direction during cassette
playback:
l
Turn on the set.
Insert a tape.
l
l
Press A V .
Fast forward
The tape will be automatically transported
to the playback position. Side A or 1 starts
to play.
During tape operation, “TR 1” or “TR 2”
(track) will show on the display panel.
At the end of a tape side, the mechanism
changes directions automatically to play the
other side (autoreverse). The display shows
-PLAY” for track (side) 1 or
<<
Fast rewind
V Track selection (S-CPS)
Up
V Down
for track 2.
Stop function by pressing
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Notice:
Selecting tracks with S-CPS
If there is too much tension on the tape
during playback, the set may switch over by
itself before having reached the end of the
tape side. In this case check the condition
of the cassette tape. Sometimes it helps to
rewind it completely.
(Super Cassette Program Search)
Use this function to skip (A) and repeat
recorded tracks.
A maximum of nine tracks can be skipped.
To do so,
Removing a tape
l
press the rocker switch as many times
as required.
l
Press
Tape equalisation
The cassette will eject.
The number of tracks to be skipped appears
on the display panel.
If necessary, you can correct your entry by
pressing the opposite rocker switch button.
Stop by pressing AV.
When a metal or
tape mechanism automatically adjusts to
tape equalisation.
tape is inserted, the
The “MTL” indicator will illuminate.
For a proper operation of the S-CPS func-
tion there has to be an unrecorded tape
19
Care notes
Skipping unrecorded tape por-
tions with Blank Skip
cassette tracks with
To avoid possible problems, we recommend
you to use
type cassette tapes
This function senses an unrecorded tape
portion continuing for more than 15 seconds
and automatically fast forwards the cassette
to the beginning of the next track.
During fast tape winding, “B-SKIP” will be
indicated on the display panel.
You can have the cassette tracks played
briefly by using the scan function. If you like
a title, stop the scan to continue listening to
that track.
only. Store your tapes in a cool place away
from dirt, dust and temperatures exceeding
120 “Fahrenheit (50 “Celsius). Allow very
cold tapes to warm up before playing them
in order to avoid uneven tape transport. Af-
ter approximately 100 hours of use, dust par-
ticles collected on the playback head or roller
may lead to tape run problems and sound
distortions.
To start/stop the scan function:
l
Press the SC button briefly.
To switch the Blank Skip function on and
off:
You can individually adjust the scan time in
the DSC menu (see “DSC programming
SCANTIME”).
l
Press the RM button for approximately
one second until you hear a beep.
Use a head cleaning tape to remove nor-
When the function has been activated,
will appear in the display.
mal
build-up. For tougher cases, use a
Dolby B
cotton swab (Q-Tip) soaked with alcohol. Do
not attempt to clean by inserting a hard ob-
ject into the player!
With this unit you can play back tapes re-
corded with Dolby-B NR or without noise
reduction.
Cassette tapes recorded with Dolby NR*
stand out by their reduced tape hiss and the
improved dynamics.
Listening to the radio during fast
tape winding with RM
(Radio Monitor)
When the tape is fast forwarded or rewound
(also with S-CPS), the radio will normally
be muted. To listen to the radio during fast
winding, activate the Radio Monitor
If Dolby-B NR is switched on,
up in the display.
will light
To switch RM on and off:
To switch
l
Press RM.
l
l
Press B (not during scan operation).
When the function is active, “RM” will light
up in the display.
Noise Reduction system manufactured under license
from Dolby Laboratories Licensing Corporation. “Dol-
by” and the double-D symbol are trademarks of Dol-
by Laboratories Licensing Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
CD changer operation (optional)
This car stereo offers you convenient con-
Selecting CDs and tracks
MIX MAG CDC-A 05 -A071
All CD tracks will be played
trol of a Blaupunkt CD changer CDC-A05
or CDC-A071. These changers are sold sep-
arately and can be purchased through your
Blaupunkt dealer.
at random.
The next disc will then also
be selected and played ran-
domly, etc.
Switching to CDC operation
MIX OFF The Mix function is
ed. Discs and tracks will be
selected in numeric order.
Make sure that at least one CD has been
inserted into the magazine.
>> up
Down
Press SRC to go through the available au-
dio sources:
To alter the setting:
l
Press MIX as many times until the de-
l
Press as many times until the display
briefly shows “CDC ON”.
sired function is briefly displayed.
Track selection
Upwards: Press briefly.
If the function is active, “MIX” will appear in
the right display corner.
CUE fast advance (audible): Keep
depressed.
“CD ERROR” Disc is dirty, damaged,
upside-down or CD-ROM
V
Downwards: Press as many times as
required.
Selecting the display mode
“NO CD”
No magazine in changer
or no disc in selected slot.
You can select the desired display mode for
CD operation:
To restart a track: Press briefly.
REVIEW -fast reverse (audible):
Keep depressed.
“NAME”
The specified name, for
example “MADONNA”
will be displayed.
MIX playback
“TIME”
The elapsed playback
time of the track is dis-
played, for example
“2 32”.
You can have the CD tracks played in ran-
dom order.
MIX CD
The tracks of the selected
CD will be played at random.
The next disc will be selected
in numeric order.
“NUMBER”
The CD position in the
magazine (disc number)
is displayed, for example
“CD8
21
Once you have completed the name as de-
sired:
To stop the Scan function:
Press SC briefly.
the display mode:
l
l
Press
during CD playback.
l
Press
To quit the naming mode,
leave the DSC menu by pressing DSC.
If you would like to name another CD,
in order to store it.
The track currently being scanned is con-
tinued to be played.
The display mode and the corresponding
setting or value will briefly show on the dis-
play panel, e.g. “TIME”,
If you have selected “NAME” without hav-
ing specified a name for the corresponding
disc, “CD PLAY” will appear in the display.
Please read also the chapter “Entering CD
names”.
l
32”.
SCAN will also be terminated by
l
pressing one of the buttons AUD,
GEO, DSC, SRC, or
.
select a new disc.
You can change any existing name by en-
tering and storing a new one (overwriting).
Entering CD names
You can name up to 99 discs.
The specified name (e.g. VIVALDI) will then
appear in the display.
Deleting CD names with
DSC-UPDATE
Storing the display mode
You can store your preferred display mode
which will then be active each time the ra-
dio is switched on.
You can delete a CD name with the help of
the DSC update function. Use “CDC UPD”
to confirm all of the CDs for which the spec-
ified name is not to be deleted.
Be sure to select the display mode “NAME”
using the
button.
To start the entry:
If required,
l
l
Press the DSC button.
“CDC-NAME” will be displayed.
l
press DIS as many times until the de-
l
Insert a magazine with CDs for which
the stored information is to be main-
tained.
sired setting is displayed.
Press
l
Hold down the
hear a beep.
button until you
The first underscore character will flash.
l
l
l
Press the DSC button.
l
Select the first character with the help
of the rocker switch
Press
Press
to select “CDC UPD”.
SCAN operation
You have the choice between the capital
letters A to Z, special characters and the
numbers 0 to 9.
Use this function to scan all of the CD tracks.
After the update has been completed,
“NEXT MAG” appears in the display.
To start the Scan function:
l
Press the button on the changer for
approximately two seconds.
l
Use the rocker switch
to the next underscore and select a
character.
to move
l
Press SC.
The tracks will be scanned one after the oth-
er in ascending order.
The magazine will eject.
Insert the next magazine.
You can select up to seven characters.
l
Download from Www.Somanuals.com. All Manuals Search And Download.
22
DSC programming
Proceed as described above for all of the
CDs/magazines for which the entered name
is to be maintained.
DSC (Direct Software Control) allows YOU
LOUDNESS Loudness When listenina
at a low level, the Loudness
function creates a more nat-
ural sound by boosting the
low frequency range.
to
certain programmable, basic
settings to suit your personal needs and
preferences and then store them.
The basic settings for this audio equipment
were made at the factory.
After having updated the last maga-
l
zine, press
To quit the function,
LOUD 1 Low boost
In the following you can find an overview of
these settings, so that you can always reset
to these if desired.
LOUD 6 Max. boost
l
press DSC.
The system has saved the name informa-
tion for all of the CDs which were inserted.
For all other discs the CD names have been
deleted.
TA VOL
Used in USA for Emergency
Alert System volume level.
If you wish to alter any of the programming,
l
press DSC.
Use the rocker switch and the
button to
In future many RDS radio
stations will differentiate be-
tween music and speech
programs.
select and adjust the functions described in
the following. The display will show you the
adjusted condition.
You can alter the tone for
speech programs from be-
tween “SPEECH 0 . . . 4”.
SPEECH 0:
Music and speech as per
AUD bass and treble set-
tings.
N V
>>
Select function
Adjust/recall value
SPEECH 1:
Linear reproduction (bass,
treble and Loudness set to
CDC NAME
Only available for CD
changer playback (optional).
Use this function to name
your CDs. (See “Entering
CD names”).
To read out the
data.
The card supplied with the
radio is used to display the
model name, type number
READ
Selecting the night
ness:
SPEECH 2-4:
Different settings for vol-
ume, bass and treble with
the Loudness being
switched off.
Try out which SPEECH set-
ting you like most.
Switch on the vehicle lights
and program the brightness
value. The car radio’s light-
ing connector must be
hooked up to the vehicle’s
electric system for this to
function properly.
(7
and the serial
number.
If you remove the
during the reading process,
“READ KC” will show on the
display panel. The unit con-
tinues to play but does not
accept any operations ex-
cept from being switched
off. Re-insert the card.
Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9. (0
off).
COLOUR
(Variocolour)
For gradually matching the
radio illumination with the
dashboard lighting.
red
. . light orange . . . . . . . . . . . . . . . . .
green . . . . . . . . . . .
Use this function to set the
scan time for the radio or
CD player from between five
and 30 seconds.
Use this setting to alter the
viewing angle to your liking
from -1 to 0 to
ANGLE
Here you can choose
tween LED ON or LED OFF.
With LED ON, the
tongue will flash for extra
anti-theft protection when
the unit has been switched.
LED ON
You can adjust the display
brightness from between 1
to 16. You can also select
different values for day and
night.
BRIGHT
To adjust the seek tuning
sensitivity for distant
tion.
DX 1 high sensitivity
DX 3 low sensitivity
S-DX
off and the
moved.
re-
To “train” a replacement
LEARN KC
Please read the information
in chapter
theft
protection system
a
Download from Www.Somanuals.com. All Manuals Search And Download.
24
S-LO
To adjust the seek tuning
sensitivity for local recep-
tion.
LO 1 high sensitivity
LO 3 low sensitivity
The seek tuning sensitivity
values can be separately set
for AM and FM.
VOL FIX
Use this function to select
the volume at which the ra-
dio is set when it is switched
on. Adjust the desired vol-
Overview of the DSC factory
settings
CD NAME
LOUDNESS
TA VOL
SPEECH
BEEP
3
35
0
ume level with
adjusted to
When
the
system will come on with the
volume selected before
switching the radio off.
4
ANGLE
0
BRIGHT
COLOUR
LED
16
green
ON
CDC UPD
Use this function to delete
CD names during CDC op-
eration, in order to have
more storage capacity for
new discs available. See
“Deleting CD names with
DSC-UPDATE”.
To quit the DSC programming mode
and store the adjustment:
LEARN KC
READ KC
l
Press DSC.
10 sec.
S-DX
S-LO
CD UPD
AUX
1
1
AUX
This menu item is not avail-
able if you have connected
a CD changer (A 05 or
A071).
OFF
0
VOL FIX
The setting made at the fac-
tory is AUX OFF.
If you have connected an
external piece of equipment
via AUX, this function must
be set to AUX ON.
Appendix
Amplifier
4 x 23 W RMS power
to DIN 45324 at
14.4 V
Output power:
4 x 35 W max. power
Tuner
Wavebands:
87.5 107.9 MHz
1710
FM
AM
:
0.9
at 26
FM sensitivity:
to-noise ratio
FM frequency response:
Tape player
Frequency response:
Questions? Problems?
Call
Subject to modifications!
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sydney RCM 126 us
Toronto RDM 126 us
Fitting instructions
Instructions de montage
lnstrucciones de montaje
de montagem
Bosch Group
8622401 236
Safety notes
Observaciones de seguridad
Antes de su
Before
before
to mount your car
read the
carefully.
termrnal
de leer
y da
and
the
da
battery’s
Desconecte termrnal
antes de
de la
del
Be sure to observe the safety notes of the
las
manufacturer
computers,
Before
alarm systems, on-board
Observe las
del
ordenador de a bordo,
Antes de taladrar
de
a
del
(con
de
holes, look to see what IS on the other
or fuse box.
of at
do not damage the battery,
lead used must have a
The set IS protected by a
asegurese de no daiiar
cableado,
The
del
least 2.5
10 A fuse.
Dunng
de
La
transversal del cable
of the
the sets
wall may
debe ser de 2 5
por lo menos El
un de A de
esta
heat up
Be sure to keep all
away from hot parts of the
Durante la
del
calentarse
de qua
con la
la parte lateral de la
cables este en
de
del
Indications de
les instructions de montage et de
de
Antes da montagem do seu
de montagem de
ler as
raccordement avant de monter
autoradio.
Debrancher pole
de la batterie pendant les
Durante o tempo da montagem da
desapertar o termrnal do borne
operations de montage et de branchement.
Prendre note des indications de du fabricant
alarmes, ordinateur de bord,
des roues).
a ce que les elements du
a fusibles) ne soient
da batena
do
as
de
do
du
computadores de
dispositifs de
bordo,
En
des
Na furagem de buracos, dar
do
a
cable,
de
pas endommages.
La section du cable
ne
pas
inferieure a
0
do
ser
a
0 aparelho esta
de
est protege par un coupe-circuit a action
10 A de
lateral do
temperaturas altas
a que OS
de
A.
A
durante
La
de I’autoradio
pendant service de I’appareil.
a ce qu’aucun cable ne se sur boitier.
Dar
da
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Connections and Installation
To avoid
you feel
aggravation of costly mistakes and serious damage that could make
way, please carefully read all of the instructions before you begin. Carefully follow
all instructions. You’ll be glad you did!
GENERAL RECOMMENDATIONS AND NOTES
l
If you’re not confident that you can install the unit correctly, have it installed by a qualified
Blaupunkt installation technician.
l
l
Use this unit only with negative ground 12 Volt (11-16 Volt) direct current (DC).
We recommend making and testing all electrical connections before installing the unit. Connect
the leads (wires) according to instructions and diagram below.
l
This unit is protected by a quick-acting
fuse. Do not substitute with any other type of fuse.
IF YOU ARE INSTALLING A COMPATIBLE BLAUPUNKT CD CHANGER
l
l
l
Blaupunkt CDC-A05 and CDC-A071 changers sold separately.
For speaker connection, use the speaker wire harness section that comes with the receiver.
For other connections, use the wire harness sections that come with the CD Changer, not the
receiver.
l
l
In place of this units yellow and green lead, use the changer’s blue lead for the antenna motor.
The changer harness also includes 4-channel RCA preamp output connections, amplifier
switch-on lead and a telephone mute lead.
ELECTRICAL CONNECTION INSTRUCTIONS
1. Disconnect the vehicle battery’s negative terminal before making connections.
2. Connect the speakers and/or external amplifiers (if you have any) following the guidelines in
the SPEAKER CONNECTION section below.
3. Connect the yellow and green “POWER ANTENNA+” (trigger output) lead to an antenna
motor trigger input terminal (if you have one). (Maximum amperage required must not
exceed
yellow/green /antenna motor
4.
the orange “ILLUMINATION” lead to the vehicle’s adjustable illumination (dimmer).
orange illumination
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the brown “GROUND+” lead to a grounded metal part on the vehicle. We recommend
grounding all audio system ground leads (receiver, external amplifier, etc.) to a common
grounding point, preferably a non-painted surface under the instrument panel.
brown ground
Connect the red lead designated “BATTERY
to a source of constant battery power.
Connect the red lead designated as “ACC
“IGNITION” (turn-on power) only after the
other leads are connected. Be sure to connect the red lead to a positive (+) 12 Volt power
terminal that is energized only when the ignition key is set to the on position or accessory
position.
Cover the ends of any unused leads with electrical tape. This will prevent them from touching
the vehicle or each other and causing a short-circuit and damage to the unit or vehicle.
Reconnect the vehicle’s battery.
8.
9.
10.
that no fuses have blown.
11. Plug the harness
the unit.
12. Attach the antenna “elbow” and affixing bracket to the back of the unit. Insert your vehicle’s
antenna.
Test the unit. Once the connections have been successfully made, you can begin to install the unit
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER CONNECTION INSTRUCTIONS
The unit’s Dual-Level Fader allows you to fade between the front and the rear channels using either
the front and/or rear speaker leads and/or the rear preamp outputs, providing you tremendous
flexibility in configuring your speaker arrangement:
l
You can connect a speaker (regular, co-axial or tri-axial speakers or component speaker system,
all hereafter referred to simply as “speaker”) to each of the units’ four pairs of speaker leads.
With the purchase of Blaupunkt accessory wire harness 8 643 494 218, you can connect the
4 RCA preamp outputs to multiple external amplifiers and power multiple speakers or speaker
systems through the amplifiers. (See below)
l
l
l
You can use a either or both of these two methods.
Blaupunkt amplifiers and speakers sold separately.
Connecting the Speaker Leads
To prevent short circuits or serious damage to the unit and/or speakers:
l
Connect the speaker leads only as indicated in the wiring diagram. Disconnect the vehicle
battery’s negative terminal before making connections.
Only use speakers that have impedance ratings of 4 ohms or higher and have power-handling
capabilities greater than the receiver’s stated power level.
l
l
l
The unit’s internal amplifier is designed to handle a 4-ohm load on each pair of speaker leads.
DON’T connect two soeakers to a
each have at least 8 ohms impedance.
DON’T connect the left and
of speaker leads (“in parallel”) unless both speakers
leads to each other or to the same speakers.
l
l
l
l
l
DON’T connect the front and
speaker leads to each other or to the same speakers.
DON’T connect the negative speaker leads to each other.
DON’T connect the positive speaker leads to each other.
DON’T connect any active speakers (with built-in amplifiers) to the speaker leads unless their
owner’s manuals specifically state that this is O.K.
l
Cover the ends of any unused leads with electrical tape. This will prevent them from touching the
vehicle or each other and causing a short-circuit and damage to the receiver or vehicle.
PREAMP OUTPUT CONNECTION
Blaupunkt wire harness 8 634 494 218
the top block on the rear of the unit. It
4-channel
oreamo out connections,
green): If you purchase a
switch-on lead (blue/white), and cellular telephone mute (dark
CDC-A05 or CDC-A071 CD Changer, you don’t need this harness
because all of these connections are included in changer’s wire harness.
AUXILIARY INPUT
If a changer IS not connected, you can connect portable
equipment to your unit by purchasing
Blaupunkt accessory harness 7 607 890 093. This harness fits in the top block on the rear of the unit.
It includes a 2 meter aux-in cable with a 3.5 mm male plug for direct insert into your portable equipment,
as well as 4-channel preamp out connections, amplifier switch-on lead (blue), and cellular telephone
mute (purple).
REMOTE CONTROLS
This receiver’s most-frequently used features can be controlled by Blaupunkt’s unique Thummer II
Steerina-Wheel Remote Control. Included with remote control are a receiving “eye” that can be placed
on the dash, as well as a wiring harness, which can be used simultaneously with the
harnesses for the preamp
and for the changer or aux Input.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
A. This car radio is designed to be installed in the car radio compartment provided by the vehicle
manufacturer. Open the car radio compartment (remove the shelf or panel by unclipping it) or
adjust the size of the car radio compartment to measure 182 x 53 mm.
B.
The mounting bracket included with this car radio is designed for installation in vehicles with a
standard DIN installation compartment measuring 182 x 53 mm, installation depth and
an instrument panel thickness of approximately 1 to 20 mm in the area of the tab fasteners, see
Fig. Reach behind the car radio compartment and check to see which tab fasteners can be
bent on the mounting bracket. Place the mounting bracket in the compartment and bend over
the tabs with the help of a screwdriver, see Fig.
2. Be sure to bend all of the tabs possible.
C. Your vehicle may also allow you to provide extra ability at the back of the unit. Look at the wall
behind the radio cavity to see if there is a small hole the size of the enclosed plastic plugs. If so,
screw one or both of the plugs onto the threaded bolt at the back of the unit before pushing the
unit into the mounting sleeve.
D
Place the car radio in the front of the mounting bracket and push it in until the side springs snap
into position on the left and the right (you will hear an audible click).
Removing the car radio
Insert the handles into the holes in the panel on the left and right of the radio and push them in
until you hear a distinct click (unlocks side springs).
Pull the unit out using both handles, see Fig. 3.
Note: Handles which have snapped into place can only be removed after you have pulled
the radio out of the compartment.
If you have any questions, please consult your Blaupunkt dealer or in the
United States call l-800-266-2528.
Download from Www.Somanuals.com. All Manuals Search And Download.
|