Blaupunkt CD Player CM 168 User Manual

Radio / Cassette  
Munich CM 168  
Operating instructions  
®
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
The display consists of three fields and varies according to the operating mode and function.  
Display field 3:  
Display field 1:  
Display field 2:  
Active functions  
Radio mode  
Radio mode  
Memory banks and wavebands  
Brief indication of preset station (e.g. P1)  
Radio frequency or station name  
Clock display  
- Stereo  
- Cassette inserted  
- CD changer connected  
- Loudness  
Cassette mode  
CAS - cassette inserted  
MTL - tape type  
Cassette mode  
TAPE1/TAPE2 - side of tape playing  
Active functions (e.g. CPS)  
Clock display  
LD  
Radio mode  
Changer mode (optional)*  
Current track  
lo  
- Seek tuning sensitivity  
Changer mode (optional)*  
Current CD playing  
CD time (elapsed time), CD name, CD  
number and Brief indication of changes in  
function  
Cassette mode  
RPT - Repeat function  
Audio  
Numeric and graphic representation of vol-  
ume and audio settings  
- Dolby noise reduction  
Clock display  
Changer mode (optional)  
RPT - Repeat function  
MIX - Tracks played at random  
DSC  
DSC  
Permanent display for DSC programming.  
Graphic representation of the adjusted vol-  
ume level.  
Serves as display and input field during  
DSC programming  
Miscellaneous  
Indicates new source (e.g. when changing  
from radio to cassette) and active functions  
(e.g. BASS, SCAN)  
* CD changer all sold separately.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Contents  
Display ........................................... 3  
Automatically storing the strongest  
Deleting CD names ............................. 17  
Deleting one CD name ..................... 17  
Deleting all CD names ..................... 18  
stations with Travelstore...................... 12  
Naming radio stations.......................... 12  
Deleting radio station names............... 13  
Deleting a radio station name .......... 13  
Deleting all of the radio station  
Quick reference ............................. 5  
RC 08H Remote control  
operation ................................................ 8  
Clock/Display changes............... 18  
Setting the clock ......................... 18  
Important notes ............................. 9  
names ............................................... 13  
Setting the TIMER ............................... 13  
What you need to know ......................... 9  
Traffic safety .......................................... 9  
Installation.............................................. 9  
Accessories ........................................... 9  
Warning note ................................... 9  
Naming an external audio  
source .......................................... 18  
Cassette deck operation ............ 14  
Cassette playback ............................... 14  
Reversing the tape direction................ 14  
Skipping cassette tracks...................... 14  
Repeat song tracks.............................. 14  
SCAN ................................................... 14  
Fast winding......................................... 14  
Tape type selection ............................. 14  
DOLBY B NR (Noise reduction)*......... 14  
Cassette eject ...................................... 15  
Turn On Message (TOM) ............ 19  
DSC programming ...................... 19  
Overview of the DSC factory settings . 21  
Detachable face .......................... 10  
Theft protection.................................... 10  
Affixing the detachable face ................ 10  
Specifications.............................. 21  
Amplifier ............................................... 21  
Tuner.................................................... 21  
Cassette............................................... 21  
CD changer (optional) ......................... 21  
Selecting the audio source ........ 10  
Radio operation .......................... 11  
Selecting a waveband ......................... 11  
Station tuning....................................... 11  
CD changer operation ................ 15  
Troubleshooting Guide .............. 22  
Inserting a CD ...................................... 15  
Switching to the CD changer mode..... 15  
Ejecting CDs ........................................ 15  
CD playback ........................................ 15  
Selecting a CD ..................................... 15  
Selecting a track .................................. 16  
RPT ...................................................... 16  
MIX....................................................... 16  
SCAN ................................................... 16  
Naming CDs ........................................ 17  
LIST ..................................................... 17  
Automatic seek tuning  
/
............. 11  
General ................................................ 22  
Radio reception ................................... 22  
CD Changer operation......................... 22  
Error Displays ...................................... 23  
Manual tuning with << >>................. 11  
Switching between the memory  
banks (FM)........................................... 11  
Storing stations .................................... 11  
Recalling stored stations ..................... 11  
Scanning stations with Preset Scan .... 11  
Scanning stations with Radio Scan ..... 12  
Changing the scan time....................... 12  
Selecting the automatic tuning  
sensitivity ............................................. 12  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick reference  
3 Volume knob  
9 Rocker switch  
1 REL  
Turn the knob to adjust the volume.  
To release the detachable panel (theft  
protection).  
4 DSC Direct Software Control  
This feature allows you to adjust the  
basic programmable settings.  
Press this knob and remove the re-  
lease panel.  
For further information, refer to the  
section on DSC programming.  
2 ON - Power up/down  
Press this button to turn the unit on. It  
will play at the volume set under DSC.  
Mute: If you press this button briefly  
during radio reception, the volume will  
turn down instantly.  
This function is cancelled by pressing  
the ON button again. You can pro-  
gramme the mute volume (refer to  
“DSC programming”).  
5 Cassette slot  
Radio mode  
Insert the tape into the slot with the  
open side showing to the right. The  
tape will be played in direction  
“TAPE 1”.  
/
Seek tuning  
Up  
Down  
<< / >> Manual tuning  
6 Display  
Press the button for about 1 second to  
turn the unit off.  
The display indicates all settings, op-  
erating modes and functions.  
>>  
<<  
up in short intervals  
down in short intervals  
Switching on/off via the ignition:  
If the unit has been connected corre-  
spondingly, it can also be turned on  
and off with the vehicle ignition.  
If ON is pressed while no power is be-  
ing supplied to the red (ignition) lead,  
the unit will automatically turn off after  
one hour. This prevents the battery  
from going dead.  
7
Cassette mode  
CPS function  
This button switches tape playback  
between Tape 1 and Tape 2 (different  
sides of the tape).  
/
Up  
Down  
8
Eject  
Press repeatedly to skip over the cor-  
responding number of songs. Press  
or << >> to stop the function.  
Press this button to eject the  
cassette.  
<<  
>>  
Fast forward  
Fast rewind  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Press the button indicating the oppo-  
: SRC (Source)  
Switching AUD off: Press the button  
again briefly.  
If you do not make any adjustments to  
the tone within 8 seconds, the AUD  
mode will quit automatically.  
site direction,  
winding.  
or  
/
to stop tape  
Press button briefly to select the oper-  
ating mode (tuner, cassette, changer  
or Aux-in). The active mode will ap-  
pear in the display.  
Changer mode (optional)  
Select CD  
Up  
< LD: Loudness  
; AUD  
Loudness boosts the bass frequency  
at low volume.  
Down  
Treble and bass adjustment  
You can store different settings for the  
FM, AM, cassette, CD-changer mode  
or Aux-in.  
Select track  
Loudness on/off: Press LD briefly.  
“LD” will appear when this setting is  
active.  
Refer to the section on DSC program-  
ming to adjust Loudness to different  
levels.  
>>  
Up: press briefly  
CUE - fast forward (audible):  
hold button down.  
Setting the tone:  
Select the operating mode.  
Press AUD once and use the rocker  
switch to set the tone.  
Treble +  
<<  
Down: press two or more  
times briefly  
Repeat track: press once  
briefly.  
REVIEW - fast reverse  
(audible) - hold button  
down.  
=
DIS - Clock display  
This unit is equipped with an internal  
clock.  
Treble -  
Bass -  
Bass +  
<<  
>>  
Display priority  
For Fader and balance adjustment:  
press AUD twice.  
Fader front  
To alter the display priority, press  
until you hear a beep. Repeat this pro-  
cedure until the desired display ap-  
pears.  
Additional rocker switch functions:  
For additional settings use  
AUD  
DSC-MODE  
Important: The corresponding func-  
tion must be active.  
Fader rear  
Balance left  
Balance right  
;
4
<<  
>>  
Temporary display change  
Press  
briefly as many times as  
needed to show the desired informa-  
tion for a few seconds.  
The selected values will appear in the  
display. The last setting is stored au-  
tomatically.  
Radio mode  
Press this button to switch between  
the clock, the station name and the  
frequency.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cassette mode  
5/MIX  
3/ - Pause  
Press this button to switch between  
the track played and the clock.  
“MIX CD” plays the tracks of one CD  
in random order.  
Interrupts tape playback. “PAUSE” will  
appear in the display.  
“MIX ALL” plays the tracks of all the  
CDs in one changer magazine in ran-  
dom order as determined by CD  
changer.  
To turn “MIX CD” on:  
Press 5/MIX briefly.  
The current setting is briefly indicated  
in the display: “MIX-CD”.  
Hold down 5/MIX to select “MIX-ALL”.  
Keep 5/MIX pressed down until a  
beep is emitted.The desired option  
lights up in the display.  
Press this button once again to  
resume playback.  
Changer mode (optional)  
Press this button to switch the display  
of the CD Name, CD number, the  
playback time elapsed and the clock.  
4/RPT  
Repeats song tracks.  
> Preset buttons 1 to 6  
“REPEAT-T” will appear briefly in the  
display. RPT will light up in the display  
and the track will repeat until 4/RPT is  
pressed again. “RPT” will disappear  
from the display.  
Radio mode  
You can store six stations in each FM  
memory bank (1, 2, and “T”).  
On AM you can store six stations.  
Store station - hold down a preset  
button in radio mode until a beep is  
emitted.  
Recall station - select a waveband  
and also the memory bank on FM;  
press the relevant preset button brief-  
ly. The selected preset button will  
briefly appear in display field 1 (e.g.  
P1).  
Changer mode  
To stop MIX functions, press 5/MIX  
briefly.  
3/ - Pause  
Interrupts CD playback. “PAUSE” will  
appear in the display. Press button  
again to resume CD playback.  
6/LIST  
Accesses CD-List mode.  
4/RPT  
? BA/TS  
Repeats tracks: press 4/RPT. “RE-  
PEAT-T” will appear briefly. The track  
will be repeated until 4/RPT is  
pressed again.  
Switches between the wavebands/  
memory banks FM1, FM2, FMT (Trav-  
elstore) and AM  
Cassette mode  
Extra function: Travelstore  
1/MTL -  
Repeat CD: select “REPEAT-D”.  
Hold down 4/RPT to select “REPEAT-  
D” until a beep is emitted.  
To stop “REPEAT-CD”, press 4/RPT  
again.  
To store the six most powerful FM or  
AM stations in the Travelstore bank:  
Select FM or AM by pressing BA/TS.  
Press BA/TS until a beep sounds and  
“T-STORE” appears.  
Press 1/MTL when playing CrO2 or  
Metal tapes.  
2/ - Dolby  
Press 2/ when playing Tapes re-  
corded with the Dolby B system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Remote control operation  
@ Preset Scan  
Cassette mode  
General  
Press PS. “PS Scan” will appear in  
the display, followed by the station  
symbol (flashing).  
The stations stored on the station pre-  
set buttons and within reception range  
will be scanned.  
Press SCA briefly. “SCAN” will appear  
in the display.  
All of the tracks on the cassette will be  
scanned.  
To stop Scan:  
Press SCA again  
SRC Press briefly: change the audio  
source  
Press briefly: muting  
V+  
V-  
Higher volume  
Lower volume  
Radio mode  
Seek tuning upwards  
You can set the scan time in DSC pro-  
gramming.  
Changer mode  
Seek tuning downwards  
Next preset station upwards  
Press briefly: select the wave-  
band  
To stop Preset Scan:  
Press SCA briefly.  
>>  
<<  
All of the CD tracks will be scanned.  
“SCAN” will appear in the display.  
To stop CD scan:  
Press PS again.  
A SCA Scan  
Hold down: Travelstore  
Press SCA again.  
Scans radio stations or song titles/  
Cassette mode  
Select track (CPS) upwards  
tracks.  
You can set the scan time in DSC pro-  
gramming.  
Select track (CPS) downwards  
Fast forward  
>>  
<<  
Radio mode  
Press SCA briefly.  
Fast rewind  
Hold down: reversing the tape  
direction  
All of the FM or AM stations within re-  
ception range will be scanned.  
“SCAN” will appear in the display, al-  
ternating with the radio station cur-  
rently being scanned (flashing).  
CD changer  
Next CD  
Previous CD  
To stop scan:  
Press SCA again.  
>>  
<<  
Press briefly: next track  
Hold down: cue  
Press briefly: previous track  
Hold down: review  
SRC Hold down: access to list mode  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important notes  
Remote Control unit RC 08  
(not included with the unit, sold separately)  
Installation  
What you need to know  
If you would like to install your new car ra-  
dio yourself or add other audio components  
to existing ones, please read the enclosed  
instructions on installation and connection  
carefully.  
In order to ensure that the unit operates  
properly the positive power supply line must  
be connected via the ignition and the per-  
manent +12 V lead.  
Before using your new car radio, please  
read through the following information care-  
fully.  
The RC 08 infrared remote control unit al-  
lows you to conveniently operate the most  
important functions from the steering wheel.  
Traffic safety  
Warning note  
Danger of damaging the automatic  
power antenna in a car wash  
As the driver of a motor vehicle, it is your  
responsibility to pay attention to the traffic  
situation at all times.  
Never use your car radio in a way that could  
distract you.  
Please keep in mind that you travel a dis-  
tance of 14 m per second at a speed of only  
50 km/h.  
Should the traffic situation become partic-  
ularly demanding, we advise you not to use  
the radio.  
Before you drive into a car wash  
Do not ground the loudspeaker outputs!  
switch the radio off by pressing the  
ON button.  
Accessories  
The power antenna will retract, if it  
doesn’t, press ON again.  
Use Blaupunkt-approved accessories and  
spare parts only.  
Do not drive into the car wash unless  
the power antenna has retracted!  
Changer  
(not included with the unit, sold separately)  
Always make sure that you are still able to  
hear any warning signals coming from out-  
side the vehicle, such as police or fire en-  
gine sirens, so that you can react accord-  
ingly.  
CDC-A08  
CDC-A072  
CDC-A05 (with adapter only)  
Consequently, you should always select a  
moderate volume for playing your car ra-  
dio while you are driving.  
Remote Control unit RC 08H  
The RC 08H infrared remote control unit  
allows you to conveniently operate the most  
important functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Detachable face  
Selecting the audio source  
If the unit was still in operation, it will turn  
off now. All current settings remain stored.  
If a cassette is inserted, it will be kept in  
the unit.  
The radio will turn on automatically when  
you attach the detachable face again.  
Use the SRC (source) button to select be-  
tween radio, cassette and CD or Aux-in  
mode.  
Theft protection  
This unit is equipped with a detachable  
face. A car radio without face is worthless  
for thieves.  
The CD mode is not available unless a CD  
changer is connected.  
Protect your car radio and detach the face  
when you leave your car. It is very easy to  
attach and detach the detachable face.  
The Aux-in mode is available if a changer  
is not connected. (See DSC programming.)  
Attaching the detachable face  
To select the operating mode:  
Slide the panel (B) from the left to the guide  
of the chassis (A). Gently push the left side  
of the panel against the front of the chassis  
until it snaps into place.  
Press SRC.  
Note:  
Do not pull the detachable face straight out  
from the chassis, but detach it as illustrat-  
ed below. Be sure not to drop the panel.  
Do not expose the detachable face to di-  
rect sunlight or other heat sources.  
Do not leave it in a humid place.  
Detaching the detachable face  
Press the REL button to release the con-  
trol panel. Then pull it off gently as illustrat-  
ed.  
Affixing the detachable face  
If you wish to fix the detachable face per-  
manently to the chassis, screw down the  
enclosed bolt at the left hand side of the  
chassis into the hole, see Fig.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio operation  
change in short intervals in the down-  
wards or upwards direction.  
ing (takes approximately 2 seconds)  
or until you hear a beep.  
Selecting a waveband  
With this car radio you can select between  
the following wavebands:  
If you hold << >> pressed to the left or the  
right on the rocker switch, the frequency  
scan will speed up.  
Now the station has been stored.  
The display will temporarily indicate which  
preset button is currently activated.  
FM 87.5 – 108.0 MHz  
AM 531 – 1602 kHz  
Select the desired waveband by  
pressing the BA/TS button.  
Switching between the memory  
banks (FM)  
Recalling stored stations  
You can recall any stored station at the  
touch of a button.  
You can switch between the memory banks  
FM1, FM2 and FMT in order to store sta-  
tions and recall them later.  
The currently selected memory bank ap-  
pears in the display.  
Station tuning  
Select the waveband by pressing  
BA/TS. For FM, also choose the cor-  
responding memory bank by pressing  
the BA/TS button as many times as  
necessary until the desired bank ap-  
pears in the display.  
Automatic seek tuning  
/
Press or ; the car radio will auto-  
matically search for the next station.  
If you hold pressed up or down on the  
Press the BA/TS button as many  
times as necessary until the desired  
memory bank lights up in the display.  
/
rocker switch, seek tuning will speed up in  
the upwards or downwards direction.  
Press the corresponding preset button  
briefly to recall the station.  
Storing stations  
Scanning stations with  
Preset Scan  
On FM, you can store six stations on the  
preset buttons 1, 2, 3, 4, 5, 6 for each of  
the memory banks (FM1, FM2, FMT).  
You can scan all of the radio stations on  
AM or FM.  
You can also store six stations on AM.  
Automatic seek tuning  
Select the waveband by pressing  
BA/TS.  
The scanned stations of the current wave-  
band will appear briefly one after the other  
in the display.  
Up  
Down  
Tune into a station with the rocker  
switch (either automatically  
manually << >>).  
/
or  
Start Preset Scan:  
Manual tuning with << >>  
Press PS briefly.  
You can also tune into a station manually.  
Press the desired preset button until  
the radio resumes play after the mut-  
“PS-Scan” and the station name or frequen-  
cy will appear alternately in the display.  
Press << >>; the frequency will  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
The preset station indication (e.g. P1) will  
flash in the display  
If the AM band is active, the six strongest  
AM stations will be automatically stored in  
the AM memory bank.  
Selecting the automatic tuning  
sensitivity  
Listen to scanned station/end Preset  
Scan:  
You can alter the automatic tuning sensi-  
tivity.  
When this process has been completed, the  
radio will play the strongest station.  
Press PS briefly.  
If “lo” is displayed, the radio will only pick  
up strong, local stations (low sensitivity).  
If “lo” does not light up, the radio will also  
pick up weaker, more distant stations (high  
sensitivity).  
If you would like to alter the sensitivity level  
please refer to the section on “DSC pro-  
gramming - SENS”.  
If desired, stations can also be stored man-  
ually in the Travelstore bank (see “Storing  
stations”).  
Scanning stations with  
Radio Scan  
You can scan through all of the stations in  
your reception area.  
Naming radio stations  
To enable you to pick out your favorite ra-  
dio station more quickly, DSC programming  
allows you to give up to 30 radio stations  
individual names.  
The radio station does not have to be stored  
in the memory bank. The names are linked  
to the radio frequencies.  
To start the Scan function:  
Press SCA briefly.  
The scanned frequency or the station name Automatically storing the strong-  
will start flashing in the display.  
est stations with Travelstore  
During the actual scanning process “SCAN”  
You can automatically store the six FM /  
will appear in the display.  
AM stations with the most powerful signals  
Listen to scanned station/end Radio  
Proceed as follows:  
Select the DSC mode.  
in your current reception area sorted ac-  
Scan:  
cording to their signal strength. This func-  
tion is particularly convenient on longer  
trips.  
Press SCA briefly.  
Press DSC.  
Press to select STA-NAME.  
You will hear the current selected station.  
/
Press the BA/TS button to select the  
Press << >> to switch to the station-  
select mode.  
Changing the scan time  
waveband.  
hold the BA/TS button for 2 seconds  
down.  
Press  
would like to name.  
/
to select the station you  
The scan time can be selected from be-  
tween 5 to a maximum of 20 seconds.  
“T-STORE” will appear in the display.  
The six strongest FM stations will be auto-  
matically stored in the “FMT” memory bank  
(Travelstore).  
Press << >> to confirm your selection.  
If you would like to alter the scan time,  
please refer to the section on “DSC pro-  
gramming - SCANTIME”.  
Now you are in the edit mode. If the  
station selected does not have a  
name, 8 dashes “_” will appear in the  
display.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The cursor will flash at the current po-  
sition. Press << >> to move the cur-  
sor.  
Release the DSC button after 2 sec-  
onds but before 8 seconds. “DELET-  
ED” will appear in the display.  
Setting the TIMER  
Using this unit it is possible to conveniently  
switch on any two radio stations you select  
at any time you select. The radio stations  
can be selected independently of the cur-  
rently active operating mode.  
Press  
/
to select a character. If  
The station name has been deleted.  
The unit will switch back to DSC  
mode.  
you want to enter a blank, select the  
dash “_”.  
Press DSC to store the name. Press  
DSC again to quit the DSC mode or  
press << >> to re-enter the station-se-  
lect mode.  
Proceed as follows:  
Deleting all of the radio station names  
Select the radio station of your choice.  
Select the DSC mode.  
Press DSC.  
Press DSC.  
Press  
Press  
/
to select TIMER 1.  
If you want to change the name, select the  
name in the DSC mode and overwrite it in  
the edit mode. If you want to change just a  
few of the letters, press << >> to move the  
cursor to the corresponding position and  
change only that character.  
/
to select STA-NAME.  
Press >> to turn the TIMER on. (Press  
<< to turn the TIMER off.).  
Press << >> to switch to the station  
select mode.  
Press >> again to select time display.  
The minutes will flash.  
Press and hold down DSC for 8 sec-  
onds.  
Press  
/
to set the minutes.  
After 2 seconds and 8 seconds you  
will hear a beep. “ONE NAME” will ap-  
pear first in the display, followed by  
“ALLNAMES”  
Press << to activate the hours.  
(>> back to the minutes).  
Deleting radio station names  
Deleting a radio station name  
Press  
/
to set the hours.  
Select the DSC mode.  
Release DSC. “DELETED” will appear  
in the display. All of the station names  
have been deleted. The unit will  
switch back to DSC mode.  
Press DSC to store your entry. You  
Press DSC.  
Press to select STA-NAME.  
have now set TIMER 1.  
/
If you would like to set TIMER 2 as well,  
repeat the steps as described above.  
Press << >> to switch to the station  
select mode.  
Note  
Press  
/
to select the station name  
The timers can be turned on and off while  
any audio source is in use.  
you would like to delete.  
Press and hold down DSC.  
“ONE NAME” will appear in the dis-  
play.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Cassette deck operation  
track selected has been reached.  
Press or << >> to stop the function.  
If you have activated “Radio Monitor ON”,  
the unit will play the radio station last se-  
lected while the tape is winding. You can  
alter the Radio Monitor setting in DSC  
mode.  
Fast winding  
Cassette playback  
Use the rocker switch to fast forward or re-  
wind the tape during cassette operation:  
Insert the tape into the slot with the open  
side showing to the right. “CASSETTE” will  
appear in the display. The tape will play in  
the direction “TAPE 1”.  
If a tape is already inside, press SRC to  
select “CASSETTE” mode. The tape will  
play in the direction last selected.  
>>  
<<  
forward  
rewind  
“FORWARD” or “REWIND” will light up in  
the display.  
Press the button indicating the opposite  
Repeat song tracks  
direction,  
, or  
/
to stop the function.  
During tape playback press 4/RPT. “RPT”  
will light up in display field 3; “REPEAT-T”  
will appear briefly in display field 2. While  
the tape is rewinding, “REWIND-T” will ap-  
pear in the display. The track playing will  
repeat until you press 4/RPT again. “RPT”  
will disappear from the display.  
If you have activated “Radio Monitor ON”,  
the unit will play the radio station last se-  
lected while the tape is winding. You can  
alter the Radio Monitor setting in DSC  
mode.  
Reversing the tape direction  
Press  
to change the tape direction dur-  
ing cassette playback from TAPE1 to  
TAPE2 or vice versa:  
At the end of the tape, the unit will auto-  
matically switch to the opposite side.  
Tape type selection  
Playback will now continue normally.  
If you have activated “Radio Monitor ON”,  
the unit will play the radio station last se-  
lected while the tape is winding. You can  
alter the Radio Monitor setting in DSC  
mode.  
If you are playing METAL or CrO2 cassettes,  
press MTL. “MTL” will then light up in dis-  
play field 1.  
Skipping cassette tracks  
CPS stands for Cassette Program Search  
and allows you to skip over songs on the  
tape.  
The tracks must, however, be separately  
by at least 3 seconds of blank tape.  
During tape playback press either  
on the rocker switch to activate the CPS  
mode. “CPS FF” or “CPS FR” will appear  
in the display. Press the button  
tedly to skip the corresponding number of  
tracks in either direction.  
The number of tracks to be skipped will ap-  
pear in the display and count down until the  
DOLBY B NR (Noise reduction)*  
Cassettes which have been recorded with  
the DOLBY B NR system exhibit consider-  
ably less tape noise and higher dynamics.  
To play properly cassettes recorded using  
SCAN  
or  
To scan all of the songs on a tape, press  
SCA. “SCAN” will appear in the display.  
All of the tracks on the tape in the tape deck  
will be scanned briefly one after the other.  
Press SCA again to switch the SCAN func-  
tion off. The track currently playing will con-  
tinue to play.  
this system, press  
.
/
repea-  
will light up in display field 3  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD changer operation  
Cassette eject  
This unit offers you the ability to conven-  
iently control a Blaupunkt CDC-A08 or  
CDC-A072 changer (or CDC-A05 with a  
special adaptor), all sold separately  
Switching to the CD changer  
mode  
Press to eject the cassette.  
Make sure that at least one CD has been  
inserted into the magazine.  
* Dolby noise reduction system is manufactured  
under licence by Dolby Laboratories Licensing  
Corporation. The word “Dolby” and the double-  
D symbol are trademarks of Dolby Laboratories  
Lincensing Corporation.  
If the CD changer is connected, the  
symbol will light up in the display.  
The changer is equipped with a magazine  
for 10 discs.  
Press SRC to change the audio source:  
Press SRC repeatedly until the CD  
functions appear in the display.  
Ejecting CDs  
Inserting a CD  
Open the door of the CD changer and press  
the eject button.  
Insert one or several CDs into the maga-  
zine (printed surface facing up).  
Slide the magazine into the CD changer in  
the direction of the arrow.  
The CDs are counted from bottom to top.  
CD playback  
Use SRC to select the CD changer.  
Press SRC repeatedly until “CHANG-  
ER” appears in the display.  
Note:  
CD playback starts with the first CD identi-  
fied by the changer.  
Use only perfectly circular CDs with a di-  
ameter of 12 cm.  
CDs with a diameter of 8 cm or CDs manu-  
factured in the shape of a mug, for exam-  
ple, are not suitable for use with this equip-  
ment.  
Using such CDs can very likely result in the  
destruction of the CD and the CD drive.  
We assume no responsibility for damages  
caused by using unsuitable CDs.  
After you have inserted the magazine, keep  
the door closed to prevent the magazine  
from becoming dusty or dirty.  
Selecting a CD  
When CD playback starts, all active CD  
functions and the CD number or name will  
light up in the display.  
To change the display between CD Name,  
CD number, elapsed time indication and  
clock, press  
during CD playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Press the button repeatedly to skip several  
tracks.  
Mix all tracks of one CD (“MIX-CD”) or  
Mix all tracks of all CDs (“MIX-ALL”) in  
manner determined by the CD chang-  
er model.  
The number of the selected track will ap-  
pear beside “T” (track).  
“MIX” will appear in display field 3 as long  
as the MIX function is active.  
“MIX-CD” or “MIX-ALL” will light up briefly  
in display field 2 when you activate this  
function and each time when the track chan-  
ges.  
RPT  
/
CD selection  
Up  
Down  
CD tracks can be played repeatedly.  
The following options are available:  
CD Select-By-Name  
Repeat the current track (“REPEAT-  
T”) or  
Switch MIX-CD on:  
If you have named a CD and it has been  
selected at least once since the magazine  
was inserted, the name is seen immediate-  
ly, so that you can easily find the desired  
CD.  
Press 5/MIX briefly.  
Switch MIX-ALL on:  
• Hold 5/MIX down for longer.  
Repeat the CD, i.e. all tracks on the  
current disc (“REPEAT-D”).  
“RPT” will appear in display field 3 as long  
as RPT is active. “REPEAT-T” will light up  
briefly in display field 2 when you activate  
this function and each time the track chang-  
es. “REPEAT-D” will show when a CD is  
repeated.  
To stop mix functions, press 5/MIX again.  
Selecting a track  
SCAN  
Use this function to scan all of the CD  
tracks.  
To start the Scan function:  
Switch REPEAT-T on:  
Press 4/RPT briefly.  
Switch REPEAT-D on:  
Hold 4/RPT down for longer.  
Press SCA, “SCAN” will appear in the  
display, alternatimg with CD number  
or CD Name of the CD currently being  
scanned.  
>> Up: Press briefly.  
To stop repeat functions, press 4/RPT.  
CUE - fast advance (audible): Hold button  
down.  
All tracks on the CD will be scanned one  
after the other in ascending order.  
MIX  
<< Down: Press two or more times briefly.  
To re-start a track: Press briefly.  
REVIEW - fast reverse (audible):  
Hold button down. When at start of first  
track, unit goes to last track on same disc.  
To stop the Scan function:  
You can have the CD tracks played in ran-  
dom order.  
Press SCA briefly.  
The track currently scanned will continue  
to play.  
The following options are available:  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Naming CDs  
If you want to alter a name which has al- Deleting CD names  
ready been entered, select that CD in the  
To allow you to identify your CDs more  
quickly, you can use DSC programming to  
enter individual names for up to 99 CDs.  
The names can have up to 7 characters.  
If you attempt to enter more than 99 names,  
“FULL” will appear in the display. The CD  
name has priority over the CD number in  
the display when manually changing CDs.  
Deleting one CD name  
DSC mode and overwrite it in the editing  
Proceed as follows:  
Select DSC programming mode.  
mode. If you want to change individual let-  
ters only, press << >> to move the cursor  
to the corresponding position and change  
that letter.  
Press DSC.  
Press to select CDC_NAME.  
/
Press << >> to enter the CD select  
mode.  
LIST  
In DSC mode (Direct Software Control) it  
is possible to assign names to your CDs.  
In LIST mode you can view these names  
without interrupting CD playback. If you  
have not named the CDs, the display will  
list the numbers only.  
Press  
want to delete.  
/
to select the name you  
Proceed as follows:  
Select DSC programming mode.  
Press DSC.  
Press to select CDC_NAME.  
Press << >> to enter the select mode.  
Press to select the CD you want  
to name.  
Press DSC and hold it down. After 2  
seconds you will hear a beep and  
“ONE_NAME” will appear in the dis-  
play.  
/
/
To enter LIST mode:  
Release DSC after 2 seconds but be-  
fore 8 seconds. “DELETED” will ap-  
pear in the display.  
Press 6/LIST, “LST” will appear in dis-  
play field 1  
Press << >> to switch to the editing  
mode. If the CD you have selected  
does not already have a name, 7  
dashes “_” will appear in the display.  
Press  
/
to see CD names  
The name of this CD has now been  
deleted. The main CDC_NAME menu  
will appear again in the display.  
If you see a CD you want to hear,  
press << >> to select that CD and it  
will begin to play.  
The cursor will flash at its current po-  
sition. Press << >> to move it.  
If you don't select a CD, the LIST  
mode will automatically end after 8  
seconds.  
Press  
/
to select the character you  
want to enter. Select a dash “_” to  
leave a blank space.  
Note:  
Press DSC to store the name. The  
main CDC_NAME menu will appear  
again in the display.  
In order for names to be seen in the LIST  
mode, the named CD must have been se-  
lected at least once since the magazine was  
inserted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Clock/Display changes  
Deleting all CD names  
Setting the clock  
This unit is equipped with an internal clock.  
All of the CD names stored in the CD chang-  
er will be deleted.  
Select DSC programming mode.  
Display priority:  
To alter the display priority, press  
you hear a beep. Repeat this procedure  
until the desired display appears.  
Set the clock in the DSC mode.  
until  
Press DSC briefly.  
Press to select the function  
/
Press DSC.  
Press to select CDC_NAME.  
“CLOCKSET”.  
/
Press << >> to activate the hours or  
the minutes. The option you can set  
will flash.  
Temporary display change:  
Press << >> to enter the CD select  
mode.  
Press as many times as needed to show  
the desired information for a few seconds.  
Press  
play.  
/
to alter the flashing dis-  
Press DSC and hold it down. After 2  
seconds and after 8 seconds you will  
hear a beep respectively  
Radio mode  
Press  
to switch between the clock, the  
When you have completed the setting,  
press DSC briefly to store it.  
station name and the frequency.  
“ONE_NAME” and then “ALLNAMES”  
will appear in the display.  
Cassette mode  
Press DSC again to exit DSC mode.  
Press to switch between the track played  
and the clock.  
Release DSC. “DELETED” will appear  
in the display. The names of all of the  
CDs have now been deleted. The  
main CDC_NAME menu will appear  
again in the display.  
Changer mode  
Press to switch between a display of the  
CD Name,CD number, the playing time  
elapsed and the clock.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Naming an external audio  
source  
Turn On Message (TOM)  
This unit offers you the possibility to enter  
a turn on message of up to 40 characters.  
The message will briefly appear in the dis-  
play each time you turn the unit on.  
AUX NAME makes it possible to enter a  
name of up to 8 characters for an external  
audio source (AUX ON, see DSC Menu).  
For this, press SRC to select the AUX mode  
(only possible if AUX ON is set in the DSC  
menu and CD changer is not connected).  
Proceed as follows:  
Select the DSC mode.  
Press DSC.  
Press to select TOM.  
Press SRC as often as required until  
/
AUX appears in the display.  
Press << to turn the message off.  
Enter the AUX NAME in the DSC menu.  
Press >> two times to select the edit  
mode.  
Press DSC briefly.  
Press  
/
to select the AUX NAME  
If there is no TOM programmed, dash-  
es “_” will appear in the display.  
function  
Press << >> to enter into editing  
mode.  
The cursor will flash at the current po-  
sition. Press << / >> to move the cur-  
sor.  
The adjustable position will flash.  
Press  
/
to select the character you  
Press  
/
to select a character. If  
want to enter. Select a dash “_” to  
leave a blank space.  
you want to enter a blank, select the  
dash “_”.  
Press << >> to select the next posi-  
tion.  
Press DSC to store the message.  
Press DSC again to quit the DSC  
mode.  
When you have entered the name  
completely, press DSC briefly to store  
the name.  
If you want to change the message, select  
TOM in the DSC mode and overwrite it in  
the edit mode. If you want to change just a  
few of the letters, press << / >> to move  
the cursor to the corresponding position and  
change that character only.  
Press DSC again to quit the DSC  
menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
DSC programming  
LOUDNESS Loudness boosts the bass  
frequencies at low volume.  
LOUD 1 - Low boost  
CLOCK 12 Switches between 12-h and  
The car radio has been equipped with DSC  
(Direct Software Control) to allow you to  
customize certain programmable, basic  
settings to suit your personal needs and  
preferences and then store them.  
24-h clock display.  
LOUD 6 - Max. boost  
CLOCKSET Sets the clock manually.  
Press << >> to select  
The basic settings for this car radio were  
made at the factory.  
BAS CENT Bass Center Frequency Ad-  
justment.  
hours/minutes. Press  
/
to adjust the flashing value.  
In the following you can find an overview of  
these settings, so that you can always re-  
set to them if desired.  
Adjusts the mid-range fre-  
quency to the specific  
equipment in the vehicle  
(50 or 100 Hz)  
TIMER 1  
The radio will automatically  
switch to a station you have  
selected at the time you  
program.  
If you wish to alter any of the programming,  
press DSC.  
“MENU  
display.  
/
” will temporarily appear in the  
STA NAME Allows you to name up to  
30 radio stations based on  
their frequency.  
TIMER 2  
ON VOL  
You can also program the  
unit to go to a second sta-  
tion at a programmed time.  
Use the  
/
buttons of the rocker switch  
to select the function you wish to change.  
The display will show you the setting you  
have selected. Press the << >> buttons of  
the rocker switch to change the settings and  
exit the current mode. Confirm the setting  
you have selected by pressing the DSC  
button.  
SENS LO  
Adjusts seek tuning  
sensitivity.“LO” stands for  
local reception.“DX” stands  
for distant reception.  
Select “LO” if you want to  
receive strong stations in  
the local area, select “DX” if  
you want to tune into weak-  
er stations which are further  
away.  
Sets the turn-on volume.  
Press << >> to adjust the  
turn-on volume as desired.  
TOM ON/OFF Turn-on-message.  
You can enter a message  
of up to 40 characters  
which appears in the dis-  
play when you switch the  
unit on.  
CDC NAME Names CDs. A maximum of  
99 CDs can be given names  
of up to 7 characters.  
/
Select function  
<< >> Adjust/recall setting  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MUTE  
BEEP  
Changes the mute volume.  
AUX  
Select AUX-ON if you wish  
to connect a portable CD or  
tape player instead of the  
CD changer. Contact your  
dealer for more information  
about the required adapter  
cable (7 607 897 093),  
Overview of the DSC factory  
settings  
Changes the volume of the  
acknowledgement tone  
(beep) between 0 and 9.  
(0 = off)  
LOUDNESS  
BAS CENT  
SENS  
3
50 Hz  
DX  
STA NAME  
CDC NAME  
CLOCK  
RM ON  
Radio Monitor  
which is sold separately.  
CLOCK 12  
If the Radio Monitor func-  
tion is active during fast  
winding of the tape, the unit  
will switch to the radio and  
play the station listened to  
last.  
CLOCKSET  
TIMER 1  
TIMER 2  
ON VOL  
TOM  
AUX NAME While in the Aux mode, you  
can change the source  
name to “VIDEO” for exam-  
ple.  
OFF  
OFF  
20  
ON  
MUTE  
10  
BEEP  
RM  
SCANTIME  
BL SKIP  
AUX  
3
ON  
10 seconds  
ON  
OFF  
DISPLAY  
Display indications on or off  
with the car radio turned  
off.  
SCANTIME Use this function to set the  
scan time for the cassette,  
radio or CD player from 5 to  
20 seconds.  
AUX NAME  
DISP  
ON  
BL SKIP  
Switches the Blank Skip  
function off and on;If tape  
has blank on more than 10  
seconds the unit fast winds  
to next song.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Specifications  
Amplifier  
17 watts per channel minimum continu-  
ous average output into 4 ohms. 4 chan-  
nels driven from 30-15000 Hz with no  
more than 1% total harmonic distortion.  
40 watts max. power.  
Tuner  
Wavebands:  
FM  
AM  
:
:
87.5 - 107.9 MHz  
530 - 1602 kHz  
FM frequency response:  
35 - 16000 Hz  
Cassette  
Frequency response:  
30 - 18000 Hz  
CD changer (optional)  
This unit offers you the ability to conven-  
iently control a Blaupunkt CDC-A08 or  
CDC-A072 changer (or CDC-A05 with a  
special adaptor), all sold separately  
Frequency response:  
20 - 20000 Hz  
Features and specifications subject to  
change without notice.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
The following check will assist in the correction of most problems which you may encounter with your unit. Before going through the  
check list below, refer back to the connection and operating procedures.  
General  
Trouble  
Cause/Solution  
No sound.  
• Adjust the volume with the volume knob.  
• With a two-speaker system, set the fader control to the center position.  
Radio reception  
Trouble  
Cause/Solution  
Preset stations are not receivable.  
Automatic tuning is not possible.  
• The broadcast is too weak.  
• The broadcast is too weak  
Use manual tuning.  
Travelstore feature does not complete  
storing of six stations.  
• Not enough broadcast frequencies are receivable.  
Also make sure that antenna is connected, extended and dry inside.  
CD Changer operation  
Trouble  
Cause/Solution  
CD does not start.  
• Dusty or defective disc.  
• The ambient temperature is more then 50° C (120° F).  
The disk cannot be loaded or is  
automatically ejected.  
• The disc is inserted with the printed side downwards.  
The sound skips due to vibration.  
• The changer is installed at an angle of more than 20°.  
• The changer is not installed on the sturdy part of a car.  
• Dusty or defective disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Error Displays  
Trouble  
Cause  
Solution  
“CD ERR”  
A disc such as an upside down or dirty  
disk, or a CD-ROM (computer) disc.  
Insert the disc correctly.  
Clean the disc.  
“NO DISC”  
No magazine or disc in changer  
Take out the magazine and insert the disc.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blaupunkt-Werke GmbH  
Postfach 77 77 77  
D-31132 Hildesheim  
Germany  
Made in Malaysia  
Copyright 1998 by the Robert Bosch Corporation  
No portion of this work may be reproduced in any form without  
the written consent of the Robert Bosch Corporation.  
K7/VKD 8 622 401 538  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  

Belkin Boating Equipment 8000I User Manual
Belkin Network Card F7D2101AK 8820AK00384 User Manual
BodyCraft Home Gym GX User Manual
Bosch Appliances Switch LTC 5104 User Manual
Braun Blood Pressure Monitor BP3550 User Manual
Breville Toaster BTA840XL User Manual
Cadet Patio Heater CEH 003M User Manual
Caframo Electric Heater 9206 User Manual
Campbell Hausfeld Staple Gun CHN71600 User Manual
Casio Calculator FX 300ESPLUS User Manual