GL650
GL660
GL660P
GL670
GL670P
GL650_UK.PM5
1
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
1
4
5
7
8
2
3
8
5
6
7
9
10
11
8
4
1
12 13
15 14
8
9
10
11
12 13
14 15
A
3
GL650_UK.PM5
3
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
19
16
11
19
17
18
20
B
C
°
20
D
4
GL650_UK.PM5
4
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
7
E
F
7
5
6
H
G
5
GL650_UK.PM5
5
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
D
A
10
11
C
B
J
I
24
22
25
23 12
21
26
25
K
6
L
GL650_UK.PM5
6
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
28
27
27
27
27
N
M
P
O
7
GL650_UK.PM5
7
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
GRASS TRIMMER
GL650/GL660/GL660P/GL670/GL670P
CONGRATULATIONS!
INTENDED USE
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
Your Black & Decker grass trimmer GL650/GL660/
GL660P/GL670/GL670P has been designed for
trimming and finishing lawn edges and to cut
grass in confined spaces.
This tool is intended for consumer use only.
EC DECLARATION OF CONFORMITY
SAFETY INSTRUCTIONS
GL650/GL660/GL660P/GL670/GL670P
Black & Decker declares that these
products conform to: 98/37/EC,
89/336/EEC, 73/23/EEC, EN 60335,
EN 55014, EN 61000
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Level of sound pressure, measured according to
84/538/EEC:
GL650 GL660 GL670
GL660P GL670P
Denotes risk of electric shock.
LpA (sound pressure)
LWA (acoustic power)
dB(A)
dB(A)
83
96
83
96
83
96
Read the manual prior to operation.
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Know your appliance
Hand/arm weighted vibration value according to
98/37/EC:
◆
Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
electric shock and personal injury.
Read all of this manual carefully before
operating the appliance.
Before operating the appliance, make
sure that you know how to switch it off
in an emergency.
GL650
GL660
GL660P
GL670
GL670P
< 2.5 m/s2 < 2.5 m/s2 < 2.5 m/s2 < 2.5 m/s2 < 2.5 m/s2
◆
◆
◆
The intended use is described in this
manual. The use of any accessory or
attachment or performance of any
operation with this appliance other than
those recommended in this instruction
manual may present a risk of personal
injury.
Brian Cooke
Director of Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
8
GL650_UK.PM5
8
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
◆
Retain this manual for future reference.
After use
◆
Switch off, remove the plug from the socket
and ensure that moving parts have stopped
rotating before leaving the appliance
unattended and before changing, cleaning or
inspecting any parts of the appliance.
When not in use, the appliance should be
stored in a dry place. Children should not have
access to stored appliances.
Work area
◆
Do not expose the appliance to rain. Do not
use the appliance in damp or wet conditions.
Only use the appliance in daylight or good
artificial light.
◆
◆
Personal protection
◆
Wear stout shoes or boots to protect your feet.
Do not operate the appliance wearing open-
toed sandals or when barefoot.
Inspection and repairs
◆
Before use, check the appliance for damaged
or defective parts. Check for misalignment and
seizure of moving parts, breakage of parts,
damage to guards and switches and any other
conditions that may affect its operation.
Do not use the appliance if any part is damaged
or defective. Do not use the appliance if the
switch does not turn it on and off.
◆
Wear long trousers to protect your legs.
Using your appliance
◆
Be sure that the appliance is switched off when
plugging in.
◆
◆
Stay alert. Watch what you are doing.
Use common sense.
◆
◆
Do not operate the appliance when you are tired.
If the appliance begins to vibrate abnormally,
switch it off and remove the plug from the
socket. Allow rotating parts to stop and inspect
the appliance for damage and loose parts.
Never pull the cord to disconnect the plug
from the socket. Keep the cord away from
heat, oil and sharp edges.
If the mains cable is damaged during use,
switch the appliance off and disconnect the
plug from the mains immediately. Do not
touch the mains cable before disconnecting
from the mains.
◆
◆
◆
◆
◆
◆
Never use the appliance when any guard or
enclosure is damaged or not in place.
Ensure that the appliance will operate properly
and perform its intended function.
Have any damaged or defective parts repaired
or replaced by an authorised repair agent.
Before use, check the mains cable for signs of
damage, ageing and wear.
Do not use the appliance if the mains cable is
damaged or defective.
If the mains cable is damaged or defective it
must be repaired by an authorised repair agent
to avoid a hazard.
◆
◆
◆
Never attempt to remove or replace any parts
other than those specified in this manual.
Safety of others
◆
Do not allow children or any person unfamiliar
with these instructions to operate the appliance. Additional safety instructions for grass trimmers
◆
Do not allow children, visitors or animals to
come near the work area or to touch the
appliance or mains cable.
The following warning symbols are found on the
appliance:
◆
Remember that the operator may be held
responsible for accidents or hazards occurring
to other people or their property.
Wear safety glasses or goggles when
operating this tool.
The cutting line will continue to run for a
few seconds after switching the appliance
off. Never attempt to force the line to
come to a standstill.
9
GL650_UK.PM5
9
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
360˚
ELECTRICAL SAFETY
6m/20ft
The appliance has been designed for one voltage
only. Always check that the power supply
corresponds to the voltage on the rating plate.
Keep people and animals at least 6 m
away from the cutting area.
Do not expose the appliance to rain or
high humidity.
This appliance is designed for use on AC
(mains) power supplies only. Do not
attempt to use on any other supply.
Switch off, remove the plug from the
socket and ensure that moving parts have
stopped rotating before leaving the
appliance unattended and before
changing, cleaning or inspecting any parts
of the appliance.
This appliance is double insulated in
accordance with EN 60335; therefore no
earth wire is required.
◆
◆
Prevent body contact with earthed or grounded
surfaces (e.g. metal railings, lamp-posts etc.).
Electric safety can be further improved by
using a high-sensitivity (30 mA / 30 mS)
residual current device (RCD).
◆
Before using the appliance, check that your
cutting path is free from sticks, stones,
wire and any other objects.
◆
Only use the appliance in the correct position,
with the cutting line near the ground, as shown
in the illustrations. Never switch the appliance
on in any other position.
Replacement of the supply cord
(Australia & New Zealand)
If the supply cord is damaged, it must be replaced
by the manufacturer or an authorised Black & Decker
Service Centre in order to avoid a hazard.
◆
◆
◆
Switch on the appliance only when hands and
feet are away from the cutting line.
Avoid body contact with the cutting line while
the appliance is running.
Do not work on steep slopes. Be sure of your
footing. Be aware that freshly cut grass is
damp and slippery.
Mains plug replacement (U.K. & Ireland only)
◆
Take care when trimming near borders and
gravel paths or roads, as stones and soil may
be moved by the cutting line.
◆
◆
Do not put the appliance down until the
cutting line has come to a complete standstill.
Use only the appropriate type of Black & Decker
cutting line. Never use metal cutting line or
fishing line.
◆
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorised
repair agent or a qualified electrician.
◆
Take care to avoid injury from the line
trimming blade. Do not touch the blade.
After extending new cutting line, always return
the appliance to its normal operating position
before switching on.
◆
◆
Disconnect the plug from the supply and
remove the fuse from the plug.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
◆
Take care to keep the mains cable away from
the cutting line. Always be aware of the
position of the cable.
◆
Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
Use 5 Amperes fuses.
10
GL650_UK.PM5
10
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
◆
◆
◆
The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their
respective points in the plug (see above).
Brown is for Live (L) (2), blue is for Neutral (N) (4).
Before replacing the top cover of the mains
plug ensure that the cable restraint (3) is
holding the outer sheath of the cable firmly
and that the leads are correctly fixed at the
terminal screws.
7. Locking ring
8. Cable storage hooks
9. Motor housing
10. Pedal (GL670/GL670P)
11. Guard
12. Line trimming blade
13. Edge guide
14. Spool housing
15. Cutting line
If the plug has a fuse cover, make sure that the
fuse cover is fitted. Do not use the plug if the
fuse cover is missing or damaged.
ASSEMBLY
Before assembly, make sure that the tool
is switched off and unplugged.
Never use a light socket.
Fitting the guard (fig. B)
◆
◆
◆
◆
◆
Unplug the tool.
Using an extension cable
Remove the screw (16) from the housing.
Place the guard (11) onto the tool as shown.
Firmly press the guard until it snaps into place.
Secure the guard with the screw (16).
Always use an approved extension cable suitable
for the power input of this appliance (see rating
plate). The extension cable must be suitable for
outdoor use.
◆
Before use, inspect the cable for signs of
damage, wear and ageing. Replace the
extension cable if damaged or defective.
When using a cable reel, always unwind the
cable completely.
Take care to keep the cable away from the
cutting line. Always be aware of the position of
the cable.
Never use the tool unless the guard is
properly fitted.
◆
◆
Releasing the cutting line (fig. A)
In transit, the cutting line is taped to the spool
housing.
◆
Remove the tape holding the cutting line (15)
to the spool housing (14).
CARTON CONTENTS
Fitting the plant protector (fig. C)
The carton contains:
1 Grass trimmer
1 Guard with mounting screw
1 Plant protector incl. parts pack
(GL660P/GL670P only)
1 Instruction manual
The plant protector is supplied as a standard
accessory with the GL660P & GL670P. For other
models, it is available as an optional accessory.
◆
Place the plant protector (17) over the guard as
shown. Make sure that the orientation is correct.
Place the two plastic caps (18) onto the plant
protector, aligning any of the marks (19) on the
caps with those on the guard (11).
◆
◆
Carefully unpack all parts.
◆
Secure the caps using the screws (20). Do not
overtighten the screws.
OVERVIEW (fig. A)
1. On/off switch
2. Handle
3. Cable restraint
4. Power inlet (not for UK)
5. Secondary handle
6. Handle button (GL670/GL670P)
Wait until the cutting line has come to a
standstill before adjusting the plant
protector.
11
GL650_UK.PM5
11
21-11-2000, 13:40
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
USE
GL670/GL670P - Adjusting the trimmer head
angle (fig. I)
Let the tool work at its own pace. Do not
overload.
The adjustable trimmer head angle allows you to
set the optimum trimming angle regardless of
your length. It also allows you to trim under
benches and shrubs.
Setting the tool to trimming or edging mode
(fig. D, E & F)
The tool can be used in trimming mode as shown
in fig. D or in edging mode to trim overhanging
grass along lawn edges and flower beds as shown
in fig. E.
◆
Let the guard (11) rest on the ground.
Keeping the pedal (10) depressed with your
foot, move the switch handle up or down as
required.
◆
◆
Release the pedal.
Trimming mode (fig. D & F)
Switching on and off (fig. A)
For trimming, the trimmer head should be in the
position shown in fig. D. If it is not:
◆
To switch the tool on, push the on/off switch (1).
To switch the tool off, release the the on/off
switch.
◆
◆
Turn the locking ring (7) counterclockwise.
Rotate the trimmer body counterclockwise
until the trimmer head engages in the
trimming position.
◆
Never attempt to lock a switch in the on
position.
◆
Tighten the locking ring by turning it clockwise.
Hints for optimum use
Edging mode (fig. E & F)
For edging, the trimmer head should be in the
position shown in fig. E. If it is not:
Trimming
◆
Hold the tool as shown in fig. D.
Gently swing the trimmer from side to side as
shown in fig. D.
◆
Turn the locking ring (7) counterclockwise.
Rotate the trimmer body clockwise until the
trimmer head engages in the edging position.
Tighten the locking ring by turning it clockwise.
◆
◆
◆
◆
◆
When cutting long grass, work in stages from
the top. Take small cuts.
Keep the tool away from hard objects and
delicate plants.
◆
GL670/GL670P - Adjusting the position of the
secondary handle (fig. A & G)
If the tool starts running slowly, reduce the load.
The secondary handle can be adjusted to provide
optimum balance and comfort.
Edging
◆
Let the guard (11) rest on the ground.
While keeping the handle button (6)
depressed, move the handle (5) into the
desired position.
Optimum cutting results are achieved on edges
deeper than 50 mm.
◆
◆
◆
◆
Do not use the tool to create edges. To create
edges, use an edging spade.
Guide the tool as shown in fig. E. Keep the
edge guide against the lawn edge.
◆
Release the handle button.
GL660/GL660P/GL670/GL670P -
To make a closer cut, slightly tilt the tool.
Adjusting the height of the tool (fig. A & H)
This tool has a telescopic body, allowing you to
set it to a comfortable height.
General
In order to achieve optimum cutting results,
only cut dry grass.
◆
◆
◆
◆
Let the guard (11) rest on the ground.
Turn the locking ring (7) counterclockwise.
Move the switch handle up or down to the
desired height.
GL660P/GL670P - Using the plant protector (fig. J)
The plant protector will help you to protect plants
while trimming along lawn edges.
◆
Tighten the locking ring by turning it clockwise.
12
GL650_UK.PM5
12
07-11-2000, 15:19
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
◆
◆
◆
In trimming mode, set the plant protector to
position A.
In edging mode, set the plant protector to
position B or C.
When there are no plants near the cutting
area, set the plant protector to position D.
◆
◆
Align the tabs (21) on the spool cover with the
holes (26) in the housing (fig. K).
Push the cover onto the housing until it snaps
securely into place.
If the cutting lines protrude beyond the
trimming blade (12), cut them off so that
they just reach the blade.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
Your Black & Decker grass trimmer uses a
specific grade of cutting line to ensure
correct auto-feed operation and optimum
performance. The use of incorrect
Black & Decker line or the use of other than
Black & Decker line may damage the auto-
feed mechanism and will void the warranty.
Before performing any maintenance,
switch off and unplug the tool.
◆
◆
◆
Regularly clean the ventilation slots in your tool Winding new line onto an empty spool
using a soft brush or dry cloth.
(fig. M, N & P)
Regularly clean the cutting line and spool
using a soft brush or dry cloth.
Regularly use a blunt scraper to remove grass
and dirt from the underneath of the guard.
You may wind new cutting line onto an empty
spool. Replacement packs of cutting line are
available from your Black & Decker dealer
(cat. no. A6440).
◆
◆
◆
Remove the empty spool from the tool as
described above.
Remove any remaining cutting line from
the spool.
First wind new line onto the uppermost part of
the spool:
Fitting a new spool of cutting line (fig. K & L)
Replacement spools of cutting line are available
from your Black & Decker dealer (cat. no. A6441).
Complete cassettes containing a spool of cutting
line are also available (cat. no. A6442).
◆
Unplug the tool.
- Feed 2 cm of cutting line into one of the slots
in the upper section of the spool as shown.
- Wind the cutting line onto the spool in the
direction of the arrow. Make sure to wind the
line on neatly and in layers. Do not criss-cross.
- When the wound cutting line reaches the
recesses (28), cut the line.
◆
Keep the tabs (21) depressed and remove the
spool cover (22) from the housing (23) (fig. K).
Remove the empty spool (24) from the spool
cover.
Remove any dirt and grass from the spool
cover and housing.
Take the new spool and push it onto the boss
in the spool cover. Rotate the spool slightly
until it is seated.
Unclip the end of one of the cutting lines and
guide the line into one of the eyelets (25) (fig. L).
The line should protrude approx. 9 cm from the
spool cover.
◆
◆
◆
- Temporarily park the line in the slots (27) on
one side of the spool as shown.
◆
◆
Repeat the above procedure for the second
cutting line on the lower section of the spool.
Park the line in the unused slots (27).
Proceed as described above to fit the spool on
the tool. Do not forget to release the cutting
line from the parking slots (27).
◆
◆
Unclip the end of the other cutting line and
guide the line into the other eyelet. The line
should protrude approx. 9 cm from the spool
cover.
13
GL650_UK.PM5
13
07-11-2000, 15:20
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
Only use the appropriate type of
PROTECTING THE ENVIRONMENT
Black & Decker cutting line. Ensure that
cutting line is present in both sections of
the spool (fig. P).
Should you find one day that your tool
needs replacement, or if it is of no further
use to you, think of the protection of the
environment. Black & Decker repair agents
will accept old Black & Decker tools and
ensure that they are disposed of in an
environmentally safe way.
TROUBLESHOOTING
If your tool seems not to operate properly, follow
the instructions below. If this does not solve the
problem, please contact your local Black & Decker
repair agent.
GUARANTEE
The Black & Decker lawn and garden guarantee
provides: 36 months parts and 12 months
labour cover in the UK, 24 months parts and
labour cover in South Africa, Australia and New
Zealand. Proof of purchase will be required.
Should your Black & Decker product become
defective within the guarantee period due to
faulty materials or workmanship, we guarantee to
either replace all defective parts or -at our
discretion- to replace the unit free of charge,
provided that:
Before proceeding, unplug the tool.
Tool runs slowly
◆
Check that the spool housing can rotate freely.
Carefully clean it if necessary.
Check that the cutting line does not protrude
more than 9 cm from the spool housing. If it
does, cut it off so that it just reaches the line
trimming blade.
◆
Automatic line feed does not work
◆
◆
◆
◆
◆
The product is returned to us or one of our
authorised repair agents with proof of purchase.
The product has been used within the
parameters of its consumer classification.
The product has not been used for hire
purposes.
Repairs have not been attempted by anyone
other than our authorised repair agents.
The failure represents normal wear and tear.
◆
Keep the tabs depressed and remove the
spool cover from the housing.
◆
Pull the cutting line until it protrudes 9 cm from
the housing. If insufficient cutting line is left on
the spool, install a new spool of cutting line as
instructed above.
◆
◆
◆
Align the tabs on the spool cover with the
holes in the housing.
Push the cover onto the housing until it snaps
securely into place.
If the cutting line protrudes beyond the
trimming blade, cut it off so that it just reaches
the blade.
This guarantee is offered as an extra benefit and
does not affect your statutory rights.
The guarantee policy
The following failures are not covered by the
above guarantee:
If the automatic line feed still does not work or the
spool is jammed, try the following suggestions:
◆
Replacing worn or damaged blades, nylon
lines, chains and power cables. These items
are regarded as replacement items which wear
during normal usage.
Failures as a result of sudden impact or
obvious abuse.
Failures due to usage not in accordance with
instructions and recommendations contained
in this manual.
◆
Carefully clean the spool cover and housing.
Remove the spool and check if the lever can
move freely.
◆
◆
◆
◆
Remove the spool and unwind the cutting line,
then wind it on neatly again as described
above. Replace the spool as instructed.
14
GL650_UK.PM5
14
07-11-2000, 15:20
Download from Www.Somanuals.com. All Manuals Search And Download.
E N G L I S H
The use of other than genuine Black & Decker
accessories and parts may cause decreased
performance or damage to the product and will
render the guarantee void.
AFTER SALES SERVICE
Full details on our after-sales service are available
contact our Service and Information Centre at the
address towards the back of this manual.
It is our aim that all Black & Decker customers
should be totally satisfied with their Black & Decker
product and our after sales service. If any help or
advice is needed, please contact your local
Black & Decker repair agent.
If your product needs repair, please take or send it
to an authorised repair agent, providing proof of
purchase if claiming a guarantee repair.
Black & Decker offers a nationwide network of
authorised repair agents.
Full details on our after sales service can be
obtained from any of our authorised repair agents.
OTHER OUTDOOR TOOLS
Black & Decker has a full range of outdoor power
tools that make life in the garden easy. If you would
like further information on the following products,
please contact our Service and Information Centre
(see the address page towards the end of this
manual) or your local Black & Decker retailer.
String trimmers
Cordless shear
Lawnmowers
Leafbusters
Chainsaws
Hedgetrimmers
Lawnrakers
Shredders
Not all products are available in all countries.
15
GL650_UK.PM5
15
07-11-2000, 15:20
Download from Www.Somanuals.com. All Manuals Search And Download.
TYP.
1
GL660 GL660P
GL650
123
140
144
122
142
117
120
141
144
119
122
143
118
121
106
106
117
131
116
108
110
111
117
132
837
836
101
112
117
113
104
149
GL660P
148
114
109
147
115
07 - 08 - 2000
E13015
GL650_UK.PM5
16
07-11-2000, 15:20
Download from Www.Somanuals.com. All Manuals Search And Download.
TYP.
1
GL670
GL670P
123
129
105
102
122
105
121
128
127
103
126
117
120
119
106
118
106
117
131
107
116
124
107
108
125
110
111
101
117
132
112
113
104
135
GL670P
134
117
114
837
109
115
133
07 - 08 - 2000
E13016
GL650_UK.PM5
17
07-11-2000, 15:20
Download from Www.Somanuals.com. All Manuals Search And Download.
Australia
DEWALT Industrial Power Tool Company
7 Clarice Road
Tel. 03 9895 9200
Fax 03 9899 7465
Box Hill, Victoria 3128
New Zealand
South Africa
Black & Decker
81 Hugo Johnson Drive
Penrose, Auckland, New Zealand
Tel. 09 579 7600
Fax 09 579 8200
Black & Decker South Africa (Pty) Ltd
Physical address:
Tel. (011) 653-1400
Fax (011) 653-1499
146 Lechwe Street
Corporate park
Randjiesfontein, Midrand
Postal address:
Postnet Suite 107, Private Bag X65
Halfway House 1685
United Kingdom
Black & Decker
210 Bath Road
Slough, Berkshire SL1 3YD
Tel. 01753 511234
Fax 01753 551155
Helpline 01753 574277
806620-09
GL650_UK.PM5
18
22-11-2000, 12:15
Download from Www.Somanuals.com. All Manuals Search And Download.
GL650_UK.PM5
19
22-11-2000, 12:15
Download from Www.Somanuals.com. All Manuals Search And Download.
806620-09
GL650_UK.PM5
20
22-11-2000, 12:15
Download from Www.Somanuals.com. All Manuals Search And Download.
|