Belkin Computer Drive P74080 User Manual

P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page a  
Hi-Speed USB 2.0  
External Drive Enclosure  
User Manual  
P74080  
F5U209  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page c  
TABLE OF CONTENTS  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Assembling Your Drive Enclosure . . . . . . . . . . . . . . . . . . . . . . . . .3  
Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Safe Removal of the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Format the USB 2.0 External Drive . . . . . . . . . . . . . . . . . . . . . .11  
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page d  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 1  
INTRODUCTION  
The Hi-Speed USB 2.0 External Drive Enclosure (the External Drive) is  
a portable compact storage drive that incorporates the USB 2.0  
(Universal Serial Bus 2.0) high-speed interface. The External Drive  
provides a fast and easy way to add more storage space to your  
computer. The Plug-and-Play feature gives you great convenience on  
the road, the External Drive can be easily connected to your  
computer by USB interface, and can even be disconnected and  
reconnected while the computer is running.  
Note: To enable Hi-Speed USB 2.0 mode (480Mbps), your computer  
must be equipped with built-in USB 2.0 ports or a USB 2.0 host  
adapter card.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 2  
SYSTEM REQUIREMENTS  
Hardware  
Notebook and desktop computer with USB 1.0 or USB 2.0 port  
Operating System  
Windows® 98 SE, Me, 2000, or XP  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 3  
ASSEMBLING YOUR DRIVE ENCLOSURE  
1. Remove top of the External Drive.  
1
2
2. If you are installing a 3 / -inch hard drive, check to make  
sure your drive is set to “Master” (see jumper setting  
information printed on top of your disk drive), then  
connect the 34-position data cable and 4-position  
power cable.  
3. If you are installing a CD/CD-RW drive, check to make  
sure your drive is set to “Master”, then connect the  
34-position data cable, 4-position power cable, and  
4-position audio cable.  
4. Choose the set of mounting holes that match the drive  
you intend to use, and install at least four of the provided  
mounting screws.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 4  
ASSEMBLING YOUR DRIVE ENCLOSURE  
Note: There are four fine-threaded screws, and four  
course-threaded screws included with your Hi-Speed External  
Drive Enclosure Kit. Be sure to choose the screws that match  
the mounting holes for your drive. Do not try to force a  
course-threaded screw into a fine-threaded mounting hole.  
5. Replace top cover and make sure it is aligned with  
bottom cover.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 5  
ASSEMBLING YOUR DRIVE ENCLOSURE  
6. Hook the first side rail around the front edge of the  
External Drive and press the rail into the six  
rectangular-shaped mounting holes on the side.  
7. If you are installing a hard disk, it is necessary to install  
the front panel. Insert the tabs on one side of the front  
panel into the mounting holes in the installed side rail.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 6  
ASSEMBLING YOUR DRIVE ENCLOSURE  
8. Insert the mounting tabs on the free end of the front panel  
into the second side rail, and hook the side rail onto the  
front of the External Drive.  
9. Finish the assembly by pressing the rail into the six  
rectangular mounting holes in the side of the External Drive.  
Important Note: If you are using Windows 98 or 98 SE, DO  
NOT connect the External Drive to your computer until driver  
installation is completed.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 7  
ASSEMBLING YOUR DRIVE ENCLOSURE  
10. Plug the square-shaped connector of the USB cable into  
the USB port on the rear panel of the External Drive.  
11. Plug the rectangular-shaped connector of the USB  
cable into a Hi-Speed USB 2.0 port on your computer or  
Hi-Speed USB 2.0 hub. You may also connect the cable to  
a full-speed USB 1.1 port on your computer or full-speed  
USB 1.1 hub.  
Note: When connected to a full-speed USB 1.1 port, the  
maximum USB bandwidth will be 12 Mbps.  
12. Plug the AC power cord into the power connector on the  
rear panel of the External Drive, and into an AC wall outlet.  
13. Power on the drive.  
14. Proceed to Driver Installation section.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 8  
DRIVER INSTALLATION  
Windows 98 SE  
1. Insert the installation CD into your CD-ROM drive.  
2. Open the Install CD.  
3. Run the “TPPINST.EXE” to install the drivers for your  
USB 2.0 External Drive.  
4. An installer dialog box appears. Click “Next”.  
5. Choose “Complete” and click “Next”.  
6. You may now connect the External Drive to your computer.  
7. Windows will now detect “USB Storage Adapter”, and finish  
installation of the required device drivers.  
8. If your new drive is already partitioned, it will now appear in  
the “My Computer” window as a “Removable Disk”.  
Note: If the removable disk option is not selected in the  
Device Manager Settings window, your new drive will appear  
as a standard Windows fixed disk.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 9  
DRIVER INSTALLATION  
Note: If the new drive does not appear in My Computer, you  
may need to partition and format the drive. Please refer to the  
“Format the USB 2.0 External Drive” section to prepare your  
USB 2.0 hard disk drive.  
A green “Unplug or Eject Hardware” icon will appear in the  
system tray.  
Windows Me/2000/XP  
1. If you are plugging the External Drive into your computer for  
the first time, Windows will detect “USB 2.0 Storage Device”  
and install the USB mass storage device class driver, which is  
built into Windows.  
2. Your new drive will now appear in the “My Computer”  
window as a “USB Disk”.  
Note: If the new drive does not appear in My Computer, you  
may need to partition and format the drive. Please refer to the  
“Partition the USB 2.0 External Hard Disk” section to prepare  
your USB 2.0 hard disk drive.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 10  
SAFE REMOVAL OF THE USB  
DISK FROM WINDOWS  
Windows 98  
1. Click the green “Unplug or Eject Hardware” icon in the  
system tray and select the device that you want to remove.  
2. When the system prompts “You may safely remove this  
device”, unplug the USB cable from the USB port of  
your computer.  
Windows Me/2000/XP  
1. Double-click on the “Unplug or Eject Hardware” icon  
in the system tray.  
2. Select the “USB Mass Storage Device” then click “Stop”.  
3. Choose the USB 2.0 External Drive that you want to  
disconnect, then click on “Stop” again.  
4. When the system prompts “You may safely remove this  
device”, unplug the USB cable from the USB port of  
your computer.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 11  
FORMAT THE USB 2.0 EXTERNAL DRIVE  
Format under Windows 98/Me  
1. Boot-up the computer into the Windows operating system.  
2. Plug in your External Drive.  
There are two methods to partition and format your  
USB 2.0 hard disk drive.  
Control Panel Method  
1. Click “Start” and choose “Setting”.  
2. Choose “Control Panel”.  
3. Double-click on “System”, then “Device Manager”.  
4. The following screen will appear.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 12  
FORMAT THE USB 2.0 EXTERNAL DRIVE  
5. Select “Disk Drives”. Your new hard disk will appear in the  
hard drive list (in this case as “Toshiba 1924FCV”).  
6. Double-click on the entry for your hard drive. Select  
“Settings”. The following screen will appear.  
7. Make sure there are check marks in the “Disconnect”,  
“Sync Data Transfer”, “Removable”, and “Int 13 unit” boxes.  
After making these changes, it will be necessary to restart  
your computer.  
8. After Windows restarts, a “Removable Disk” icon will appear  
in the “My Computer” window.  
9. Right-click the “Removable Disk” icon and select “Format”  
from the drop-down list.  
10. Your removable hard drive is now ready for use.  
Note: Using this method to format your removable hard drive  
will result in a single partition equal in size to the maximum  
rated capacity of your hard disk.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 13  
FORMAT THE USB 2.0 EXTERNAL DRIVE  
DOS Method (Recommended for Advanced Users Only)  
1. Click on “Start”, and choose “Programs”. Select “MSDOS”.  
2. At the DOS prompt, type “FDISK” and press “Enter”.  
Note: If the FDISK utility terminates without displaying an error  
message, exit back to Windows and disconnect the External  
Drive. Reboot your computer. When Windows restarts,  
reconnect the External Drive and go back to Step 1.  
3. In the opening FDISK screen, answer the question: “Do you  
want to enable large disk support?” Enter “Y” if you want to  
create a partition larger than 2GB. Enter “N” if you want to  
create a partition smaller than 2GB.  
4. The FDISK “Options” screen will now appear. Select option  
5, “Change Current Fixed Disk”. Select your new disk from  
the list of available drives.  
5. In the “Change Current Fixed Disk Drive” screen, enter the  
disk drive number that is assigned to your External Drive.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 14  
FORMAT THE USB 2.0 EXTERNAL DRIVE  
IMPORTANT  
Be sure that you select option 5 and change the “Current  
Fixed Disk” from “Disk 1” to the disk number assigned to your  
External Drive. If your computer is equipped with only one  
internal drive, your new External Drive will be identified as  
“Disk 2”. If your computer is equipped with two internal disk  
drives, your new External Drive will be identified as “Disk 3”.  
Failure to follow this step will result in the loss of all data on  
your primary internal hard disk.  
6. In the steps that follow, you must specify if you want to  
create one partition equal to the maximum capacity of  
your external disk drive, or if you want to create  
multiple partitions.  
7. After completing the disk partition procedure, exit FDISK  
and restart Windows. Any new drives created through the  
disk partition procedure must now be formatted using the  
Windows disk format utility.  
Partition under Windows 2000/XP  
1. To partition the USB 2.0 hard disk drive under Windows  
2000, please plug in the USB 2.0 External Drive, then click on  
“Start”, choose “Settings”, then choose “Control Panel”.  
Double-click the “Administrative Tools” icon, then  
double-click the “Computer Management” icon. You will see  
the screen on the next page.  
Note: In Widows XP, click on “Start”, choose “Control Panel”,  
click on the “Performance & Maintenance” icon, click on the  
“Administrative Tools” icon, then click on the “Computer  
Management” icon.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 15  
FORMAT THE USB 2.0 EXTERNAL DRIVE  
Note: If you are viewing the Control Panel in classic mode,  
proceed directly to “Administrative Tools”.  
2. Click on “Disk Management”. All connected disk drives will  
be displayed in the lower right-hand corner of the  
“Computer Management” window. Information regarding  
the status of each of your disk drives will be displayed in this  
window. Right-click on the status bar for your new external  
drive to create or delete new partitions, and/or format an  
existing partition.  
Note: When creating a new partition, a “New Partition Wizard”  
will start and guide you through the setup. This will also format  
the drive for you.  
3. Once the disk partition and format procedure is completed,  
your new External Drive is ready for use.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 16  
INFORMATION  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220,  
declare under our sole responsibility that the product:  
F5U209  
to which this declaration relates:  
Complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may  
cause undesired operation.  
CE Declaration of Conformity  
We, Belkin Corporation, declare under our sole responsibility that the F5U209, to which this  
declaration relates, is in conformity with Generic Emissions Standard EN55022 1998 and with  
Generic Immunity Standard EN55024 1998, LVD61000-2-3, and LVD61000-3-3.  
Belkin Corporation Limited Lifetime Product Warranty  
Belkin Corporation warrants this product against defects in materials and workmanship for its  
lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no  
charge provided it is returned during the warranty period, with transportation charges  
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of  
purchase may be required.  
This warranty does not apply if the product has been damaged by accident, abuse, misuse,  
or misapplication; if the product has been modified without the written permission of Belkin;  
or if any Belkin serial number has been removed or defaced.  
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,  
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS  
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or  
addition to this warranty.  
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER  
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME,  
GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM  
OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 17  
Belkin Corporation  
501 West Walnut Street  
Compton • CA • 90220 • USA  
Tel: 310.898.1100  
Fax: 310.898.1111  
Belkin Components, Ltd.  
Express Business Park  
Shipton Way • Rushden • NN10 6GL  
United Kingdom  
Tel: +44 (0) 1933 35 2000  
Fax: +44 (0) 1933 31 2000  
Belkin Components B.V.  
Starparc Building • Boeing Avenue 333  
1119 PH Schiphol-Rijk • The Netherlands  
Tel: +31 (0) 20 654 7300  
Fax: +31 (0) 20 654 7349  
Belkin Components Ltd.  
7 Bowen Crescent • West Gosford  
NSW 2250 • Australia  
Tel: +61 (0) 2 4372 8600  
Fax: +61 (0) 2 4372 8603  
Belkin Tech Support  
US:  
310.898.1100 ext. 2263  
800.223.5546 ext. 2263  
Europe: 00 800 223 55 460  
Australia: 1800 666 040  
© 2002 Belkin Corporation. All rights reserved.  
All trade names are registered trademarks of respective manufacturers listed.  
P74080  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beko Washer Dryer WMB 71443 User Manual
Belkin Computer Accessories F8T042UKB User Manual
Black Box Network Hardware LGB5128A User Manual
Black Box Switch LE14XXA User Manual
Blaupunkt Car Stereo System 33 User Manual
Bosch Power Tools Laser Level DAF220K User Manual
Briggs Stratton Lawn Mower IS3100Z User Manual
Bushnell Telescope 74 0100 User Manual
Canon Digital Camera 130 User Manual
Carcomm PDAs Smartphones CMPC 92 User Manual