|
MM327 Bicycle Handlebar Mount Kit for Magellan®, Mio®, and Navman® GPS
Package Contents:
(1) CM032-ST-2 - Bicycle handlebar mount
(1) APMM300 - Dual-T pattern adapter plate
Compatible with:
• Magellan Maestro: 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050,
4210, 4215, 4200, 4220, 4245, 4250, 4350, 4370, 4700, 5310, and 5340
• Magellan RoadMate: 1200, 1210, 1212, 1215, 1220, 1230, 1340, 1400, 1412, 1430, 1440,
1470, 1475T, 2000, 2200T, 2250T, 300, 3000T, 3050T, 360, 500, 500 Plus, 6000T, 700, 760,
800, and 860T
• Magellan Triton: 1500, 200, 2000, 300, 400, and 500
• Magellan Crossover: GPS 2500T
• Mio Moov: 300, 301, 310, 330, 330 Europe, 360, 370 Europe, 380, 500, and Knight Rider Ed.
• Navman: S50, S50 3D, S70, S90i
CM032-ST-2
Bicycle Handlebar Mount
Precaution: Arkon strongly recommends using a securing strap to
!
APMM300
Dual-T Adapter Plate
provide extra protection for your device. Failure to do so may result
in damage to your device. Do not operate portable devices while
riding. Arkon Resources, Inc. assumes no liability for safety of bicycle
rider or portable device.
Bicycle Handlebar Mounting
...continued from previous column
Step 1. Choose a suitable location on the handlebars of your bicycle
in which to mount the pedestal.
Step 2. Adjust the angle of the mount and cradle as needed, then
retighten the swivel tightening knob (F) to firmly secure.
Step 2. Unscrew the wing nut (A) and remove the screw in order to
open the notch cover plate (B) so pedestal can be placed
around the handlebars.
Connect Adapter Plate to Device
Step 1. Insert the adapter plate into the vertical groove pattern on
the back of the GPS unit (not included, sold separately.)
A
C
B
Step 3. Wrap the rubber rings (C) around the handlebar and re-clip
the notch cover plate (B) around the rubber rings. Tighten
the assembly by twisting the wing nut (A) until it stops.
Connect GPS Device to Bicycle Mount
Step 1. Connect the dual T-slots (G) on the back of the adapter plate
to the dual T-tabs (D) on the bicycle mount.
Dual-T Device Attachment
Step 1. If your Magellan device has dual-T slots on the back, attach
the unit to the bicycle mount by connecting the dual T-slots
(E) to the dual T-tabs of the mount (D).
D
D
F
E
F
Step 2. Adjust the angle of the mount and cradle as needed, then
retighten the swivel tightening knob (F) to firmly secure.
®
Safety Precautions
!
Do not reposition the pedestal while cycling or driving. Arkon
Resources, Inc. does not promote the adjustment of GPS or mobile
devices except when the bicycle or vehicle is safely parked or stopped.
The Mobile Mounting Specialists™
Consumer Hotline:
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2009 Arkon Resources, Inc.
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9am-5pm, PST
Arkon is not responsible for any damages caused to your bicycle, your
device, or yourself due to the installation or use of this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
|