®
PowerForce
B A G L E S S
U S E R ’ S G U I D E
6594 SERIES
3
Safety Instructions
Product View
4
5-6
6-8
Assembly Instructions
Operation / Special Tools
8-11
Maintenance
12-13
Troubleshooting
14
Replacement Parts
15
Consumer Services
16
Warranty
DJ68-00281A
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
unplugging vacuum cleaner.
■ Use extra care when cleaning stairs.
■ Unplug before attaching the turbobrush.
■ Do not pick up flammable materials (lighter
fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapors.
READ ALL INSTRUCTIONS
BEFORE USING YOUR
UPRIGHT VACUUM.
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, etc.).
Always connect to a polarized outlet (left slot is
wider than right). Unplug from outlet when not in
use and before conducting maintenance.
■ Do not use vacuum cleaner in an enclosed
space filled with vapors given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapors.
■ Do not pick up hard or sharp objects such as
WARNING:To reduce
glass, nails, screws, coins, etc.
the risk of fire, electric shock,
■ Do not pick up anything that is burning
or smoking, such as cigarettes, matches, or
hot ashes.
■ Do not use without filters in place.
■ Use only on dry, indoor surfaces.
■ Keep appliance on a level surface.
or injury:
■ Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
■ Do not leave vacuum cleaner unattended
when it is plugged in.
■ Unplug from outlet when not in use and
■ Do not carry the vacuum cleaner while it
before servicing.
is running.
■ Do not use outdoors or on wet surfaces.
■ Do not allow children to operate vacuum
SAVE THESE
INSTRUCTIONS FOR
FUTURE USE
cleaner or use as a toy.
■ Close attention is necessary when used by or
near children.
■ Do not use for any purpose other than described
in this User’s Guide.
■ Use only manufacturer’s recommended
attachments.
THIS APPLIANCE HAS
A POLARIZED PLUG.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should,
has been dropped, damaged, left outdoors,
or dropped into water, have it repaired at an
authorized service center.
■ Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
appliance over cord. Keep cord away from
heated surfaces.
To reduce the risk of electric shock, this appliance has
a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician
to install a proper outlet. Do not change the plug in
any way.
■ Do not unplug by pulling on cord. To unplug,
This model is for household use only.
grasp the plug, not the cord.
■ Do not handle vacuum cleaner or plug with
wet hands.
■ Do not put any object into openings.
Do not use with any opening blocked; keep
openings free of dust, lint, hair, and anything
that may reduce air flow.
■ Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
■ Turn off all controls before plugging or
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cord Clip
Hose Clip
Handle
Stretch Hose
Crevice Tool
Carrying
Handle
Quick Release
Cord Wrap
Extension Wand
Louvers
®
Quick Reach
Handle
Power Cord
Combination
Hose Wand
Dusting Brush/
Upholstery Tool
Upper Tank
Hose
Wand Base
Power Switch
Handle
Release
Pedal
Inner and Outer
Circular Filters
Dirt Container
Filter Cup
™
Foot Hose
Lock ’n Seal
Lever
Post-Motor
Filter
Headlight
Height
Adjustment
Knob
Powerfoot
Furniture Protection
Guard
CAUTION:
Do not plug in your vacuum
cleaner until you are familiar
with all instructions and
operating procedures.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How To Use This Guide
This User’s Guide has been designed to help
you get the most satisfaction from your BISSELL
PowerForce Bagless. You’ll find assembly and
operating instructions, safety precautions, as well
as maintenance and troubleshooting instructions.
Please read this Guide thoroughly before assembling
your vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they fit. Following
this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL
PowerForce Bagless for many years.
WARNING:
Plastic film can be
dangerous. To avoid
danger of suffoca-
tion, keep away from
babies and children.
How To Put It Together
The only tool you’ll need to assemble your vacuum
cleaner is a screwdriver.
Attach Handle To Vacuum
Locate the vacuum Handle and remove the screw
packet taped to the base of the Handle.
1.
Stand the vacuum upright and place the Handle on the
top of the vacuum body as shown.
2.
Insert the screws provided from the screw packet into
the existing holes on each side. Tighten securely with
a screwdriver.
3.
Attach Vacuum Hose and Tools
Attach the Twist ‘n Snap™ Hose by lining up the tabs on
the base with the corresponding notches on the back of
the vacuum as shown.
1.
Turn the Twist ‘n Snap Hose to the right to lock the hose
into place.
2.
3.
Grasping the Quick Reach Handle, slide the end of the
Hose Wand onto the Hose Wand Base. Snap the Hose
into the Hose Clip.
NOTE: The Powerfoot will not operate
effectively unless the Hose Wand is
firmly attached.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach Vacuum Hose and Tools Continued
Slide the Extension Wand and the Crevice Tool together
into the storage clip on the side of the vacuum.
4.
5.
Snap the Combination Tool into the storage clip on the back
of the vacuum.
How To Use Your Vacuum
Handle Positions
Press the Handle Release Pedal with your foot to place
your vacuum in one of three cleaning positions.
Upright- For storage and above floor cleaning with tools.
1.
Normal Cleaning- Press Handle Release Pedal once.
Use for most household floor cleaning tasks.
2.
Low Cleaning- With the vacuum in normal cleaning posi-
tion, press Handle Release Pedal again. Use for reaching
under low furniture such as tables, chairs
or beds.
3.
CAUTION:
Container is in locked posi-
tion and that all filters (Inner
Circular, Outer Circular,
Pre-Motor and Post-Motor) are
in place. Do not operate your
vacuum without these filters.
Height Adjustment
Before using your vacuum,
make sure that the Dirt
The Powerfoot/Rotating Floor Brush can be
adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
Place Handle in Upright Position.
1.
Tip:
Turn Height Adjustment Knob to desired setting.
2.
Before cleaning under
low furniture, check
area first for objects
that might harm the
unit or block the
Lowest Setting For bare floors.
Medium Settings For short and medium
pile carpets.
Highest Setting For plush pile carpet.
Vacuum Hose.
Place the Handle in the normal cleaning position and
the Powerfoot will adjust to the setting chosen.
3.
Tip:
NOTE: You may also adjust the setting
while in the normal cleaning position.
Your vacuum features
a Quick Release Cord
Wrap. To remove the
Power Cord quickly
and easily, rotate the
Upper Cord Wrap
towards floor, and
slip Power Cord from
Upper and Lower
Cord Wraps.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Transporting Cleaner
To move your cleaner from room to
room, put the Handle in the upright
position, tilt the cleaner back on its rear
wheels and push forward.
1.
2.
The cleaner can also be moved by
using the Carrying Handle on the back.
Carrying Handle
Special On-Board Tools
Your BISSELL PowerForce Bagless is
not only a powerful carpet and rug
vacuum cleaner, it’s also a versatile
above floor vacuum cleaner when you
select one of the special tools.
NOTICE:
Raise Handle to Upright Position.
1.
The Floor Brush will continue to rotate
while you use your vacuum for above
floor cleaning. To prevent carpet
damage, do not lean on the vacuum
or let the Powerfoot tilt forward.
Grasp the Quick Reach Handle and lift
Hose Wand to separate from suction
intake opening.
2.
Attach tools by firmly pushing onto
Vacuum Hose or Extension Wand.
3.
Combination Dusting Brush/
Upholstery Tool:
Two types of cleaning tools are included in
one attachment: rotate for desired tool.
■ Use Brush side to dust furniture,
blinds, books, lamps, shelves, and
baseboards.
■ Use Upholstery side for curtains,
draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a
longer reach.
CAUTION:
The Rotating Floor Brush
continues to rotate while tools are in use.
To reduce the risk of injury from moving
parts, always move the cleaner with the
Carrying Handle at the back of the cleaner.
Always place vacuum cleaner on floor with
Handle in Upright position when using tools.
Never place your fingers under the cleaner
when it is running. Never place Powerfoot
on furniture or uneven surfaces. Do not
place vacuum cleaner close enough
to objects to pull them into rotating brush.
Tip:
Hair, string and small
objects can block
the Vacuum Hose
or Tools. Check
them occasionally for
obstructions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Cord Storage
When you are done using your vacuum, return it
to the Upright position and store the Power Cord.
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely
harmless and are not associated
in any way with the main
power supply.
Turn vacuum cleaner off.
1.
Unplug Power Cord by grasping the polarized plug (NOT
the cord) and disconnect from outlet.
2.
Loop Power Cord around Cord Wraps on side of
vacuum cleaner.
3.
4.
Clip molded plug to Power Cord to secure.
How To Maintain Your Vacuum
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
WARNING:
To reduce the risk of
electric shock, turn Power
Switch OFF and discon-
nect polarized
Empty the Dirt Container when the dirt reaches the
“Full” line on the side.
1.
plug from electrical outlet
before performing
Check the Inner and Outer Circular Filters, and the
Pre-Motor Filter at least once a month and clean or
replace as needed.
2.
3.
maintenance or
troubleshooting checks.
Clean or replace the Post-Motor Filter every three to
six months.
Note: More frequent filter cleaning or
replacing may be necessary if you are
vacuuming new carpet, fine dust, or have
allergy concerns. Follow the instructions on
the following pages to perform these simple
maintenance steps.
Tip:
For maximum cleaning
performance, check
and clean or replace all
filters as suggested.
Full Line
Empty Dirt Container
The Dirt Container needs to be emptied when the dirt
reaches the “Full” line on the side of the Container.
Lock Position
Unlock
Position
Unplug cleaner from electrical outlet.
1.
Slide the Lock ‘n Seal Lever to the "Unlock" position.
2.
3.
Grasp handle and pull the Dirt Container straight out to
remove from vacuum.
Empty dirt into garbage container.
4.
5.
Put the Dirt Container back in the vacuum and slide the
lever to the "Lock" position.
Note: The Dirt Container may be washed in
warm water with a mild detergent. Remove
the Filter Cup from the bottom before
washing. Reassemble and make sure it is
completely dry before using again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning The Inner & Outer Circular Filters
Use only BISSELL Style 10 Replacement Filters in your BISSELL
PowerForce Bagless.
Unplug the cleaner from electrical outlet.
1.
Remove the Dirt Container as described in the previous section. Grasp
the Filter Cup located at the bottom of the Dirt Container and twist
counterclockwise to unlock and remove.
2.
Grasp the Circular Filters and twist to unlock. Pull straight
up to remove.
3.
4.
Separate the Outer foam and Inner pleated Circular Filters. Wash each
individually by hand in warm water. Mild detergent may be used if
desired. Rinse well, then air dry thoroughly before putting them back
together and replacing in Filter Cup.
The Filter Cup may be washed in warm water with a mild detergent.
Make sure it is completely dry before reassembling with filters.
5.
6.
The Upper Tank and Louvers may also be wiped clean with a damp
cloth. Reach underneath the Upper Tank and turn the rim of the Louvers
to unlock. Pull straight down to remove.
WARNING:
Do not operate cleaner
with damp or wet
filters or without all
filters in place.
Cleaning the Pre-Motor Filter
Unplug the cleaner from electrical outlet.
1.
2.
The Pre-Motor Filter protects the motor from debris. It is located
underneath the Dirt Container and Filter Cup in the center of the
round part of the Lock ‘n Seal Lever.
Pre-Motor
Filter
Remove the small round Filter and any debris on top of it. Rinse well
under warm water, then air dry thoroughly before replacing.
3.
Cleaning the Post-Motor Filter
Use only BISSELL Style 10 Replacement Filters in your
BISSELL PowerForce Bagless.
Unplug the cleaner from electrical outlet.
1.
Post-Motor Filter
The Post-Motor Filter assists in the filtration process to return clean
air to the room. It is located behind the door on the front of the
cleaner. When the filter becomes dirty, open the door, remove the
filter and clean.
2.
WARNING:
To reduce the risk of
The Post-Motor Filter may be hand washed in warm water. Mild
detergent may be used if desired. Rinse well, then air dry thoroughly
before replacing.
injury from moving parts,
turn off vacuum cleaner
and disconnect Power
Plug from electrical outlet.
3.
4.
Replace the door by inserting the tabs on the left side and snapping the
right side into place.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Check Rotating Floor Brush and Drive Belt
You should check your vacuum cleaner’s Rotating
Floor Brush and Drive Belt regularly for wear or
damage. You should also clean the brush and brush
ends of strings, hair, and carpet fibers. These can
wrap around the brush and hamper its ability to
effectively clean your carpet. Also remove any debris
that has accumulated under the brush cover.
Unplug cleaner from electrical outlet.
1.
2.
Place handle in Low position and turn vacuum cleaner over
so bottom side is up.
4
Lift tab 1 and release the three latches in order 2-4 as
marked. Lift the Brush Cover off.
3.
Grasp Rotating Floor Brush at both ends and lift.
4.
5.
Clean strings, hair and other debris from Rotating Floor
Brush, paying particular attention to brush ends.
Clean strings, hair and other debris from Motor Pulley and
Drive Belt areas.
6.
Motor Pulley
Check Drive Belt carefully for wear, cuts or stressed areas.
7.
8.
Check Air Passageway for obstructions. Remove debris
from this area.
Replace Drive Belt
Air Passageway
Use only BISSELL Style 10 Replacement Belts (#32074)
in your BISSELL PowerForce Bagless.
Unplug cleaner from electrical outlet.
1.
With Rotating Floor Brush removed from vacuum cleaner
2.
(Steps 1-4 of Check Rotating Floor Brush and Drive Belt),
grasp old Drive Belt and remove from Motor Pulley. Discard
old Drive Belt.
Place new Drive Belt over Motor Pulley and stretch other
end over Rotating Floor Brush in the space between
the bristles.
3.
Place ends of Rotating Floor Brush down into slots on sides
as shown.
4.
Turn Rotating Floor Brush by hand several times in the
direction of Motor Pulley. If properly installed, Drive Belt will
center itself on Rotating Brush.
5.
Reposition Brush Cover and snap back into place. Check to
be sure all three latches are secured.
6.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Replace Lightbulb
Use only BISSELL Replacement Bulbs in your BISSELL
PowerForce Bagless.
Unplug cleaner from electrical outlet
1.
Using a flat screwdriver, table knife or coin, insert into the
slot on the right of the lens and gently push inner latch
to the left as shown to remove the lens.
2.
3.
Standard Bulb – remove the bulb from the socket by
grasping bulb and pulling straight out. Install the new bulb
by pushing it gently into the socket until the bulb snaps
into place.
Standard Bulb
Large Bulb - remove the bulb from the socket by pushing
bulb in gently and turning it towards brush. Install the new
bulb by pushing it gently into the socket and turning away
from the brush.
Reposition lens, by inserting tab on left side and then
pushing the right side back into place.
4.
Large Bulb
Louvers
Clearing Clogs
Low suction, poor pickup, or no suction may be
due to a clog in the vacuum cleaner. If you notice a
change in the sound of the motor or a reduction in the
spinning action in the Dirt Container, check for clogs.
Unplug cleaner from electrical outlet.
1.
Suction
Inlet
Empty Dirt Container.
2.
Check Upper Tank and Louvers for build up or clogs.
3.
Check to make sure Louvers are installed correctly. To
unlock the Louvers, grasp the rim and turn toward the left.
Pull straight down to remove. If the Louvers are missing
or not locked into place, che |