Bissell Vacuum Cleaner 18PO User Manual

Garage Pro  
V A C U U M  
U S E R ’ S G U I D E  
1 8 P 0 S E R I E S  
4 3 Z 3 S E R I E S  
Safety Instructions  
3
4
Product View  
5-6 Assembly  
6-9 Operation  
10-12 Maintenance and Care  
13 Troubleshooting  
14 Consumer Services  
15 Replacement Parts  
16 Warranty  
ug110-4046_18P0_408.indd  
1
4/17/08 4:42:59 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
When using an electrical appliance, basic  
precautions should be observed, including  
the following:  
This appliance is provided with double-insulation. Use  
only identical replacement parts. See instructions  
for servicing of double-insulated appliances.  
Turn off all controls before plugging or unplugging  
READ ALL INSTRUCTIONS  
BEFORE USING YOUR  
vacuum cleaner.  
Use extra care when cleaning stairs.  
Do not pick up flammable materials (lighter fluid,  
gasoline, kerosene, wood shavings, etc.) or use in  
the presence of explosive liquids or vapors.  
GARAGE PRO VACUUM.  
Always connect to a polarized outlet (left slot is wider  
than right). Unplug from outlet when not in use and  
before conducting maintenance.  
Do not pick up toxic material (chlorine bleach,  
ammonia, drain cleaner, etc.).  
Do not use vacuum cleaner in an enclosed space  
filled with vapors given off by oil base paint, paint  
thinner, some moth proofing substances, flammable  
dust, or other explosive or toxic vapors.  
WARNING:To reduce  
the risk of fire, electric shock,  
Do not pick up hard or sharp objects such as  
or injury:  
glass, nails, screws, coins, etc.  
Do not modify the polarized plug to fit a  
non-polarized outlet or extension cord.  
Do not pick up anything that is burning or smoking,  
such as cigarettes, matches, or hot ashes.  
Do not leave vacuum cleaner unattended when it  
Do not use without filters in place.  
Keep appliance level.  
is plugged in.  
Unplug from outlet when not in use and  
before servicing.  
Use indoors only.  
Do not carry the vacuum cleaner while it  
is running.  
Do not allow children to operate vacuum  
SAVE THESE  
cleaner or use as a toy.  
Close attention is necessary when used by or  
INSTRUCTIONS FOR  
FUTURE USE  
near children.  
Do not use for any purpose other than described in  
this user’s guide.  
Use only manufacturer’s recommended  
attachments.  
THIS APPLIANCE  
HAS A POLARIZED  
PLUG.  
Do not use with damaged cord or plug.  
If appliance is not working as it should, has been  
dropped, damaged, left outdoors, or dropped  
into water, have it repaired at an authorized  
service center.  
Do not pull or carry by cord, use cord as a handle,  
close a door on cord, or pull cord around sharp  
edges or corners. Do not run appliance over cord.  
Keep cord away from heated surfaces.  
To reduce the risk of electric shock, this appliance has a  
polarized plug (one blade is wider than the other). This plug  
will fit in a polarized outlet only one way. If the plug does  
not fit fully in the outlet, reverse the plug. If it still does not  
fit, contact a qualified electrician to install a proper outlet.  
Do not change the plug in any way.  
Do not unplug by pulling on cord. To unplug, grasp  
the plug, not the cord.  
Do not handle vacuum cleaner or plug with  
This model is for household use only.  
wet hands.  
Do not put any object into openings. Do not use with  
any opening blocked; keep openings free of dust,  
lint, hair, and anything that may reduce air flow.  
Keep hair, loose clothing, fingers, and all parts of  
body away from openings and moving parts.  
3
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd  
3
4/17/08 4:43:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product view  
Face Plate  
Power Switch  
Wet/Dry Hose Inlet  
Blower Hose  
Outlet  
Muffler  
Power Cord  
Slots  
Dirt Tank Handles  
Dirt Tank  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
4
ug110-4046_18P0_408.indd  
4
4/17/08 4:43:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Your unit will require no tools to put together.  
1. Remove the dirt tank by pulling up on both  
handles to unlatch. Lift upper half of unit  
to remove.  
2. Remove all accessories and parts stored in  
the bottom of the tank prior to use.  
3. If the round funnel comes out of dirt tank,  
set back inside the dirt tank before reas-  
sembling vacuum.  
4. To reassemble, place the top of the unit on the  
dirt tank so the edges fit together and latch  
handles to secure top and bottom of unit.  
5. Mount to wall (see instructions below).  
Mounting & installation  
Only use when properly mounted on the wall.  
When mounting to a stud, use the (3) center holes.  
Mounting on drywall or plaster wall with stud  
(fasteners included)  
1. Locate a stud in your dry wall and drill a  
1/8” pilot hole.  
2. Mount the bracket with a #10-16 x 1-3/4”  
Use (3) Middle Holes  
To Mount Bracket  
screw, starting at the center hole.  
3. Ensuring your bracket is aligned correctly  
with the stud; drill a second pilot hole using  
the next hole as a guide. Securely fasten  
with a screw.  
4. Repeat step 3 for remaining hole.  
Note: Mount near a wall outlet, making sure  
the cord provided will reach the outlet.  
WARNING:  
Do not mount unit  
5. Mount the unit by making sure the two  
square slots on backside of unit are sitting  
on the two hooks on the mounting bracket.  
directly into dry wall.  
ALWAYS locate a stud.  
ATTENTION:  
Make sure the end of the  
bracket with the smaller  
width faces up.  
5
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd  
5
4/17/08 4:43:01 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Mounting & installation continued  
Concrete Wall (fasteners not included)  
You will need; (4) 3/8” x 2-1/4” concrete sleeve  
anchors.  
1. Drill a 3/8” x 1-3/4” hole with a masonry drill bit.  
Use (4) Outer Holes  
To Mount Bracket  
2. Insert a bolt and anchor sleeve into the hole.  
3. Align the bracket over the hole and mark  
remaining hole locations using the (4) outer  
holes of the mounting bracket; remove  
bracket and drill remaining holes.  
Slots  
4. Mount the bracket starting at top corner hole,  
tightly securing sleeve anchor with hex nut.  
5. Repeat for three remaining holes.  
6. Mount the unit by making sure the two  
square slots on backside of unit are sitting  
on the two hooks on the mounting bracket.  
Mounting the Hose Holder (fasteners included)  
1. Determine desired location for hose holder  
and screw 1-1/4” screw into stud.  
(If mounting into drywall with no stud  
available, use supplied drywall anchors)  
2. Hang holder from screw and insert 2-1/2”  
screw in bottom hole of hose holder to finish  
mounting.  
3. Wrap hose around holder.  
WARNING:  
Operation  
Do not remove  
plastic covering on  
power switch.  
Power switch  
The power switch is located on the top left side  
of the vacuum.  
To turn vacuum on, ( I ) press up.  
To turn vacuum off, ( O ) press down.  
Power Switch  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
6
ug110-4046_18P0_408.indd  
6
4/17/08 4:43:09 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Wet or dry vacuuming mode  
1. Attach hose to the wet/dry hose inlet  
opening (located on the front left side of the  
unit) by pushing fitted end of hose and  
turning clockwise until you feel it is secure.  
2. Attach extension wand, if desired, to end of  
hose by pushing it firmly into the hose.  
WARNING:  
Do not tamper with  
float/water sensor.  
Always make sure the  
float/water sensor is  
in the dirt tank and not  
outside of the tank.  
3. Attach additional wand or tool, if desired, by  
firmly inserting onto the wand.  
4. Plug in the unit and push the power switch  
up to begin vacuuming.  
Blower mode  
1. Attach hose to the blower hose outlet  
opening (located on the right side of the unit  
on top of muffler) by inserting fitted end of  
hose and turning clockwise until it is locked  
in and secure.  
Float/  
Water  
Sensor  
2. Attach extension wand, if desired, to end of  
hose by pushing it firmly into the hose.  
3. Attach additional wand or tool, if desired, by  
firmly inserting onto the wand.  
4. Plug in the unit and push the power switch  
up to begin blowing.  
Safety device  
1. The vacuum has a protection device to  
automatically power off when the tank reaches  
its water capacity (this prevents water from  
reaching the motor). If this happens, the red  
light will turn on indicating the tank needs  
immediate emptying.  
CAUTION:  
Do not run any objects  
including cars over hose.  
2. If the temperature exceeds the unit’s limit,  
the thermal protection device will turn on and  
automatically power off the unit. If this  
happens, wait 30 minutes prior to restarting  
the vacuum.  
WARNING:  
Do not suck up volatile  
or flammable liquids  
such as gasoline,  
3. In the event of a clogged or full dirt tank, the  
yellow light will turn on indicating the dirt tank  
and filter need cleaning. To ensure best  
performance, clean the tank and filter every  
15-30 days.  
kerosene or oil.  
7
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd  
7
4/17/08 4:43:27 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Thermal motor protection:  
An internal thermal protector has been  
designed into your cleaner to protect it  
from overheating. When the thermal  
protector activates, the main vacuum  
motor will stop operating. If this  
happens, proceed as follows.  
1. Turn the vacuum OFF and unplug from  
electrical outlet.  
2. Check the vacuum for the source of  
overheating problem (i.e. full dirt tank, dirty  
filters or clog).  
3. Fix the problem by following the steps in the  
maintenance section of the user guide.  
Face plate  
Green LED light  
The LED power will turn on when unit is  
turned on.  
Yellow LED light  
The LED full dirt tank indicator will turn on  
when dirt tank needs emptying.  
Red LED light  
The LED full water tank indicator will turn on  
when water level is too high.  
Using the tools  
Make sure the tools are secure to the hose or  
wand before using.  
1. Attach extension wand to end of hose by  
pushing it firmly onto the hose.  
2. Attach additional wand or tool, if desired,  
by firmly inserting onto the wand.  
3. Use the hose and wand alone or attach any  
of the tools to the end of the hose wand.  
Accessories  
32” Flexible crush proof hose  
Hose holder  
Accessory caddy  
Mounting bracket  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
8
ug110-4046_18P0_408.indd  
8
4/17/08 4:43:34 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Floor cleaning  
(2) Extension wands  
Use with desired attachment for a longer reach.  
Large area cleaning tool  
Use on large surfaces for maximum pick up.  
Multi surface floor tool  
May be used on both carpet/rugs or hard floor  
surfaces. For use on carpets, make sure the tab is  
Hard Floor  
Carpet  
in the down position  
. This will hide the  
soft outer brushes. For hard floor surfaces, press  
the opposite tab in the down position  
. This will engage the soft outer brushes.  
Upholstery cleaning  
Crevice tool  
May be used for both dry vacuuming or wet  
cleaning in tight spaces and corners.  
Dusting brush  
Use soft bristles for dusting vehicle interior.  
Small upholstery tool  
5” tool may be used for small, quick pick ups.  
Car detailing  
Precision suction tool  
3” tool may be used for cleaning your vehicle.  
Precision blower tool  
May be used to blow air to get rid of unwanted  
debris in tight spaces.  
(3) Small, medium and large detailing tools  
May be used to clean small crevices and edges  
in your vehicle.  
Emptying the dirt tank  
Empty the dirt tank after every use. If red light  
indicates, empty dirt tank.  
1. Unplug the unit from the electrical outlet.  
Unclip the dirt tank handles while holding the  
bottom portion of the vacuum. Empty over  
trash can.  
2. Reattach the dirt tank to the main unit by  
aligning the top of the dirt tank to the upper  
portion of the vacuum. Use one hand to hold  
the tank and use the other hand to clip the  
handles to hold the tank securely.  
9
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd  
9
4/17/08 4:43:50 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Cleaning the dirt tank  
1. Unplug the unit from electrical outlet.  
2. Remove the dirt tank by pulling up on both  
handles to unlatch.  
3. Ensure the dirt tank has been emptied.  
4. The dirt tank may be washed in warm  
water. Make sure it is completely dry  
before reassembling.  
5. Reattach the dirt tank to the main unit by  
aligning the top of the dirt tank to the upper  
portion of the vacuum. Use one hand to hold  
the tank and use the other hand to clip the  
handles to hold the tank securely.  
Cleaning the filters  
The filter should be checked every 15-30 days  
and washed as needed to maintain performance.  
Frequency of cleaning will be based on individual use.  
Primary filter  
1. Unplug the unit from electrical outlet.  
2. Remove the dirt tank by pulling up on both  
handles to unlatch.  
3. The filter is located inside the top portion of  
the vacuum. Pull either black tab towards  
the middle of the unit and remove.  
4. Shake filter over trash can to release any  
loose debris.  
5. Use a damp cloth to wipe the inside and  
outside of the filter if desired. Air dry  
thoroughly before replacing.  
6. To replace, hold one edge of the filter,  
collapse and snap in.  
7. Reattach the dirt tank to the main unit by  
aligning the top of the dirt tank to the upper  
portion of the vacuum. Use one hand to hold  
the tank and use the other hand to clip the  
handles to hold the tank securely.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
10  
ug110-4046_18P0_408.indd 10  
4/17/08 4:44:05 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Cleaning the filters continued  
Secondary filter  
1. The secondary filter is located above the  
primary filter.  
2. To remove the primary filter, see instructions on  
page 10.  
3. To remove the secondary filter, pull filter  
down and out.  
4. Shake filter over trash can to release any  
loose debris.  
5. Rinse filter with warm water.  
6. To replace filter, insert into top portion of  
vacuum.  
Clearing clogs  
Low suction or poor pickup may be due to a clog  
in the vacuum. If this occurs, the LED full dirt  
tank indicator light will turn yellow and indicate  
airflow is restricted.  
If there is no suction or if suction is reduced at  
the hose, follow these steps to clear the clog:  
1. Unplug vacuum from electrical outlet.  
2. Check the filter and clean as necessary (see  
cleaning your filters above and on page 10).  
3. Check to see if dirt tank is full. Empty if  
needed.  
4. Check wet/dry or blower outlet for clogs.  
If the clog is contained near the top of the hose  
(close to the unit), follow these steps:  
1. Attach hose to the wet/dry inlet and turn the  
power on.  
2. This should dislodge the clog by sucking in  
debris.  
11  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd 11  
4/17/08 4:44:10 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and care  
Clearing clogs continued  
If the clog is contained near the bottom of the  
hose (close to where tools are attached), follow  
these steps:  
1. Remove wand or tool.  
2. Attach hose to the blower outlet and turn the  
power on.  
3. This should dislodge the clog by blowing out  
debris.  
If the above methods are not successful, find the  
clog by hand, then squeeze the hose and shake  
until the debris dislodges.  
Tool maintenance  
Keep tools clean and free of debris.  
1. Wipe tools clean with damp cloth.  
Note: The multi surface floor tool  
contains a strip of red material  
that should not get wet. If it needs  
cleaning, wipe with damp cloth only.  
SERVICING OF DOUBLE-INSULATED APPLIANCE  
A double-insulated appliance is marked  
with one or more of the following: The  
words DOUBLE-INSULATION or DOUBLE-  
INSULATED or the double insulation symbol  
(square within a square).  
In a double-insulated appliance, two  
systems of insulation are provided  
instead of grounding. No grounding  
means is provided on a double-insulated  
appliance, nor should a means for  
grounding be added to the appliance.  
Servicing a double-insulated appliance  
requires extreme care and knowledge of  
the system, and should be done only by  
qualified service personnel. Replacement  
parts for a double-insulated appliance  
must be identical to the parts they replace.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
12  
ug110-4046_18P0_408.indd 12  
4/17/08 4:44:10 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING:  
To reduce the risk of electric shock,  
turn power OFF and disconnect  
polarized plug from electrical outlet  
before performing maintenance or  
troubleshooting.  
Vacuum cleaner won’t turn on  
Possible causes  
Remedies  
1. Power cord not plugged in  
2. Blown fuse/tripped breaker in home  
1. Check electrical plug  
2. Check/replace fuse or reset breaker  
3. Thermal protector activated  
3. Allow cleaner to cool for 30 minutes, see  
pg 8. This will reset thermal protector  
4. Dirt tank is full of water  
5. Dirt tank is full of debris  
4. Empty tank and reattach  
5. Empty tank and reattach  
Vacuum cleaner and tools won’t pick up or low suction  
Possible causes  
Remedies  
1. Hose not properly positioned  
2. Dirt tank not installed properly  
1. Make sure hose is fully connected to base  
2. Check assembly of upper and lower portions,  
correctly position and secure into place  
3. Dirt tank full  
3. Empty dirt tank  
4. Clog in cleaner  
4. Follow instructions on pg 11 and 12 for  
clearing clogs  
5. Filters are dirty  
5. Check and clean filter  
6. Hose not properly attached  
6. Make sure hose collar is pushed in or in  
locked position  
7. Vacuum is not suctioning or blowing  
7. Make sure hose is in correct inlet/outlet  
Other maintenance or service not included in the manual should be performed by an  
authorized service representative.  
Thank you for selecting a BISSELL product.  
If you should happen to need assistance during assembly or operation, call 1-800-237-7691.  
Please do not return this product to the store.  
For any questions or concerns, BISSELL is happy to be of service.  
Contact us directly at 1-800-237-7691.  
13  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd 13  
4/17/08 4:44:10 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BISSELL Consumer Services  
For information about repairs or replacement parts, or questions about your warranty, call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday  
Saturday  
Or write:  
8 a.m. — 10 p.m. ET  
9 a.m. — 8 p.m. ET  
BISSELL Homecare, Inc.  
PO Box 3606  
Grand Rapids MI 49501  
ATTN: Consumer Services  
Or visit the BISSELL website - www.bissell.com  
When contacting BISSELL, have model number of cleaner available.  
Please record your Model Number: ___________________  
Please record your Purchase Date: ___________________  
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of  
a warranty claim. See Warranty on page 16 for details.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
14  
ug110-4046_18P0_408.indd 14  
4/17/08 4:44:10 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacement parts - BISSELL Garage Pro™ Vacuum  
You may purchase parts from your retailer, by calling BISSELL Consumer Services or by  
visiting our website. Below is a list of common replacement parts. While not all of these  
parts may have come with your specific model, they are available for purchase if desired.  
Please note, all attachments may not store on board your vacuum.  
Item  
1
Part No.  
203-0151  
Part Name  
Hose Assembly- 32 FT  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
203-0152  
203-0153  
203-0154  
203-0155  
203-0156  
203-0157  
203-0158  
203-0159  
203-0160  
203-0161  
203-0162  
203-0163  
203-0164  
203-0165  
203-0166  
203-0167  
203-0168  
203-0169  
203-0170  
203-0171  
3
Hose Holder  
Accessory Caddy  
Wall Mounting Bracket  
Extension Wands (2)  
Large Area Cleaning Tool  
Multi Surface Floor Tool  
Crevice Tool  
Dusting Brush  
Small Upholstery Tool  
Precision Suction Tool  
Precision Blower Tool  
Detailing Tools Assembly  
Top Cover  
Secondary Filter  
Primary Filter  
Hose Inlet  
Hose Inlet Gasket  
Dirt Tank Gasket  
Dirt Tank Funnel  
Dirt Tank Assembly  
4
1
2
5
6
7
8
9
10  
16  
11  
17  
12  
18  
13  
19  
14  
20  
15  
21  
15  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
ug110-4046_18P0_408.indd 15  
4/17/08 4:44:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty - BISSELL Garage Pro™ Vacuum  
This warranty gives you specific legal rights, and you may also have other rights which may vary from state  
to state. If you need additional instruction regarding this warranty or have questions regarding what it may  
cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.  
Limited Two Year Warranty  
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL  
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s  
option, free of charge from the date of purchase by the original purchaser, for two years, any defective or  
malfunctioning part.  
See information below on "If your BISSELL product should require service".  
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not  
apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused  
by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is  
not covered.  
If your BISSELL product should require service:  
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.  
If you need information about repairs or replacement parts, or if you have questions about your warranty,  
contact BISSELL Consumer Services.  
Website or E-mail:  
Use the “Customer Services” tab.  
Or Call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday 8 a.m. - 10 p.m. ET  
Saturday 9 a.m. - 8 p.m. ET  
Or Write:  
BISSELL Homecare, Inc.  
PO Box 3606  
Grand Rapids MI 49501  
ATTN: Consumer Services  
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE  
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE  
OF THE PRODUCT.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation or exclusion may not apply to you.  
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY  
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER  
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION  
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION  
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.  
Some states do not allow limitations on how long an implied warranty lasts so the  
above limitation may not apply to you.  
©2008 BISSELL Homecare, Inc  
Grand Rapids, Michigan  
All rights reserved. Printed in Korea  
Part Number 110-4046  
Rev 4/08  
Visit our website at:  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
16  
ug110-4046_18P0_408.indd 16  
4/17/08 4:44:32 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beko Ventilation Hood CWB6403X User Manual
Black Box Network Router MDR210A 485 User Manual
Blanco Indoor Furnishings 157 013 User Manual
Blaupunkt Car Stereo System CR 87 User Manual
Bose Portable Radio Radio II User Manual
Boston Acoustics Speaker 65LF User Manual
Briggs Stratton Portable Generator 30325 User Manual
Cadillac Automobile 2010 User Manual
Canon Camera Lens 135mm F 2L User Manual
Canon Printer 5252B001 User Manual