BIPAC-645
DSL/Cable Router Plus ISDN Router
With 4-Port 10/100M LAN Switch
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
The Rear Ports
Power
(jack)
Connect the supplied power adapter to this jack.
Console
(port)
Connect the supplied RS-232 cable to this port when
connecting to a PC’s RS-232 port (9-pin serial port).
ISDN So
(RJ-45
Connect an RJ-45 cable to this port when connecting
to the ISDN.
connector)
LAN 1-4
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when
connecting to a LAN such as an office or home
network.
WAN
(RJ-45
connector)
Connect an UTP Ethernet cable to this port when
connecting to the Internet or making other WAN
connections.
Connecting the BIPAC-645
1. Connect the BIPAC-645 to a LAN (Local Area Network)
and the WAN or ISDN.
2. Power on the device.
3. Ensure the Power and LAN LEDs are lit.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
For more detailed instructions on configuring
and using the device, please refer to the on-line
manual.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
Configuring PC in Windows 95/98/ME
1. Go to Start / Settings /
Control Panel. In the
Control Panel
double-click on Network
and choose the
Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or
any Network Interface
Card (NIC) in your PC.
Then click Properties.
3. Select the Obtain an IP
address automatically
radio button.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
4. Then select the DNS
Configuration tab.
5. Select the Disable DNS
radio button and click
OK to finish the
configuration.
Configuring PC in Windows NT4.0
1. Go to Start / Settings /
Control Panel. In the
Control Panel double
click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol
and click Properties.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
3. Select the Obtain an IP
address from a DHCP
server radio button and
click OK.
Configuring PC in Windows 2000
1. Go to Start / Settings /
Control Panel. In the
Control Panel
double-click on Network
and Dial-up
Connections.
2. Double-click Local Area
Connection.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
3. In the Local Area
Connection Status
window click
Properties.
4. Select Internet Protocol
(TCP/IP) and click
Properties.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
5. Select the Obtain an IP
address automatically
and the Obtain DNS
server address
automatically radio
buttons.
6. Click OK to finish the
configuration.
Configuring PC in Windows XP
1. Go to Start / Control
Panel (in Classic
View). In the Control
Panel, double-click on
Network Connections.
2. Double-click Local
Area Connection.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
3. In the Local Area
Connection Status
window, click
Properties.
4. Select Internet
Protocol (TCP/IP) and
click Properties.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
5. Select the Obtain an
IP address
automatically and the
Obtain DNS server
address automatically
radio buttons.
6. Click OK to finish the
configuration.
Configuring the BIPAC-645
1. Start a web browser on any one of the PCs in the LAN and enter the
You should see the
following screen.
2. The default password (“password”) has already been entered for you.
You can just click “Log On!” to log on. You may use the “System
Tools” menu to change the password later.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
3. Make a decision either Internet access via EWAN or ISDN.
For EWAN
1. You need to make a decision about Obtain IP Address Automatically.
Available options are via PPP over Ethernet, via DHCP, via PPTP
or No.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
2. If you choose via DHCP for the selection of Obtain IP Address
Automatically. The following screen will be displayed. Enter the
following information and then Click Apply.
3. If you choose via PPP over Ethernet for the selection of Obtain IP
Address Automatically. The following screen will be displayed. Enter
the following information and then Click Apply and Test.
4. If you choose via PPTP for the selection of Obtain IP Address
Automatically. The following screen will be displayed. Enter the
following information and then click Apply and Test.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
5. If you choose No for the selection of Obtain IP Address
Automatically. The following screen will be displayed. Enter the
following information and then Click Apply.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BIPAC-645 DSL/Cable Router plus ISDN Router
For ISDN
1. Select I use Internet Access over ISDN and then click Next.
2. Select “Basic Internet Access” and press “Next”
3. Enter the information about ISP.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
If the test is successful, your users will be ready to
access the Internet. If not, the device will try to give
you enough information to let you know why the
connection is not successful.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|