Belkin Tech Support
Belkin B.V.
US: 310-898-1100, ext. 2263
800-223-5546, ext. 2263
UK: 0845 607 77 87
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 800 616 1790
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
4 Pioneer Avenue
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2007 Belkin International, Inc. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed. Windows, Windows
Vista, and Microsoft are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
P74242-D
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
• 2-Port KVM Switch with Cabling (PS/2)
• User Guide
Introduction
Congratulations and thank you for purchasing the Belkin 2-Port KVM
Switch with Cabling. The Switch is easy to set up and use, and comes
with everything you need to share one monitor, keyboard, and mouse
between your two computers. No additional cables or software
are required.
The diagram below shows a typical KVM Switch setup. Your monitor,
keyboard, and mouse connect to the Switch. The Switch is connected
to your two computers using the included cables.
Package Contents/Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
1
System Requirements
Monitor
The Switch supports LCD and CRT monitors with VGA connections.
You can also use your DVI-I monitor with the Switch by connecting a
VGA adapter to the DVI cable. The Switch does not support direct DVI
connections from monitors.
VGA connection
Keyboard/Mouse
The Switch supports PS/2-based keyboards and mice.
PS/2 connection
Computers
The Switch can be used with desktop or notebook computers that
support PS/2 keyboard and mouse connections, and that run on one of
these operating systems:
®
™
• Windows 2000, XP, 2003, or Vista
®
• Linux
2
System Requirements
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing your Switch
Before you begin, make sure that both computers are powered off.
1. Connect your monitor, keyboard, and mouse to the Switch.
Installing your Switch
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connect the cables to the monitor, keyboard, and mouse ports on
your two computers.
3. Power on your computers.
You are now ready to use your Switch.
4
Installing your Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your Switch
When you power up your computers, your first computer’s desktop will
appear on your monitor. You are now ready to use that computer as if
it were directly connected to your monitor, keyboard, and mouse.
To switch access to your other computer, press the “SCROLL LOCK”
key twice on your keyboard, followed by the up arrow key. Your other
computer’s desktop will appear on your monitor. You are now ready
to use your other computer as if it were directly connected to your
monitor, keyboard, and mouse. To switch back to your other computer,
press the “SCROLL LOCK” key twice, followed by the down arrow key.
Switch to Computer 2
Switch to Computer 1
Using your Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
5
FAQs
What operating systems does the Switch support?
The Switch supports Windows 2000, XP, 2003, and Vista; and Linux.
What type of mice does the Switch support?
The Switch supports PS/2 mice from many manufacturers including
®
®
®
Belkin, Microsoft , Logitech , and Kensington
What is the maximum video resolution the Switch supports?
The advanced video circuit in the Switch supports a maximum
resolution of 2048x1536@65Hz.
Can I use my DVI-I monitor with the Switch?
Yes, you can use a DVI-I monitor with the Switch by attaching a VGA
adapter to the monitor’s DVI connector.
Do I have to install any software to use the Switch?
No, the Switch does not require any software to be installed in
your computers.
Do I have to connect one notebook and one desktop computer to
the Switch?
No, the Switch can also be used for two notebook computers or two
desktop computers.
6
FAQs
Download from Www.Somanuals.com. All Manuals Search And Download.
Does the Switch allow me to transfer files from one computer to
another computer?
No, the Switch allows you to share peripherals between computers
(monitor, keyboard, and mouse). To share or transfer files between
computers, you will need a networking switch.
Does the Switch require an AC adapter?
No, no additional power supply is required for the Switch to
function properly.
Can I use the Switch to switch video signals only?
No, the Switch requires power from the PS/2 ports in order to operate.
FAQs
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Troubleshooting
Monitor Support
I am getting ghosting, shadowing, or fuzzy images on my monitor.
• Check that all video cables are inserted properly.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Check that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
• Connect the monitor directly into the computer with which you are
having trouble to see if the problem still appears.
I am getting a black screen on my monitor.
• Check that all video cables are inserted properly.
• Connect your monitor directly to the computer to verify that your
monitor is functioning properly.
• Take your computer off standby mode.
• Check that the power supply is properly connected.
Keyboard Support
My computer does not detect my keyboard and I get a keyboard
error reported at boot up.
• Check that your keyboard cable is connected properly to the Switch.
Tighten any loose connections.
• Try swapping your keyboard with a different one.
8
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Mouse Support
My mouse is lost when I switch to a different computer.
• Check that your mouse cable is connected properly to the Switch.
Tighten any loose connections.
• Attach the mouse directly to the computer with which you are
experiencing mouse problems.
• Allow up to one minute after your computer wakes up from standby
mode for mouse function to return.
• Deactivate power management schemes on the computer with
which you are experiencing problems.
• Try swapping the mouse with a different one.
My computer boots up fine, but the mouse does not work.
• Make sure the mouse works when directly plugged into the
computer. (Rebooting may be necessary when trying this.)
• Try a different mouse.
When I switch from one computer to another, mouse movement is
completely erratic.
• Avoid moving the mouse or pressing the mouse button when
switching ports on the Switch.
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
9
General Support
My computer does not boot up when connected to the Switch,
but works fine when I connect the monitor, keyboard, and mouse
directly to it.
• Make sure that the keyboard and mouse cables are connected
tightly between the Switch and the computer.
• Check that the keyboard and mouse cables are not crossed, i.e.,
make sure the connectors are plugged into the correct ports.
10 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street, Compton CA 90220, declare
under our sole responsibility that the product F1DK102P, to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the F1DK102P, to
which this declaration relates, is in conformity with Emissions Standard EN55022 and with
Immunity Standard EN55024, LVP EN61000-3-2, and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la classe B est conforme á la norme NMB-003 du Canada.
Belkin International, Inc., Limited 3-Year Product Warranty
What this warranty covers.
Belkin International, Inc., warrants to the original purchaser of this Belkin product that the
product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin International, Inc., warrants the Belkin product for three years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge (except for
shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin
International, Inc., for inspection upon Belkin’s request at the sole expense of the
purchaser, or if Belkin International, Inc., determines that the Belkin product has been
improperly installed, altered in any way, or tampered with. The Belkin Product Warranty
does not protect against acts of God (other than lightning) such as flood, earthquake,
war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse,
damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program,
or system equipment modification or alteration.
Information 11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to get service.
To get service for your Belkin product you must take the following steps:
1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn:
Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how to forward
your receipt and Belkin product and how to proceed with your claim.
Belkin International, Inc., reserves the right to review the damaged Belkin product. All costs
of shipping the Belkin product to Belkin International, Inc., for inspection shall be borne
solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical
to ship the damaged equipment to Belkin International, Inc., Belkin may designate, in its
sole discretion, an equipment repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from such repair facility and
of such estimate shall be borne solely by the purchaser. Damaged equipment must remain
available for inspection until the claim is finalized. Whenever claims are settled, Belkin
International, Inc., reserves the right to be subrogated under any existing insurance policies
the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN INTERNATIONAL, INC.,
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY
LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED
WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL BELKIN INTERNATIONAL, INC., BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS,
BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR
USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights, which
may vary from state to state. Some states do not allow the exclusion or limitation of
incidental, consequential, or other damages, so the above limitations may not apply to you.
12 Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|