Secure DVI-I KVM
Dual-Head Switch with Audio
User Manual
F1DN104E – Secure 4-Port DVI-I Dual-Head KVM with Audio
F1DN104F – Secure 4-Port DVI-I Dual-Head KVM with Audio Plus
8820-00764 Rev. A00
Download from Www.Somanuals.com. All Manuals Search And Download.
InTroDuCTIon
9
table of contents
sections
1
2
3
4
5
6
7
8
Thank you for purchasing this Belkin Secure DVI-I Dual-Head
KVM Switch (the Switch). This KVM Switch is designed for use in
Package Contents
secure defense and intelligence installations. The Switch offers safe
centralized control, which prevents unintended data transfer between
computers running at different security levels. The Switch provides
the highest security safeguards and features that meet today’s IA
(information assurance) computing requirements.
• Belkin Secure DVI-I Dual-Head KVM Switch
• 12V 1.5A DC Power Supply and Power Cord
• 10 Interchangeable Port Color Chips (multiple colors)
• 12 Port-Naming Labels
This User Manual provides all the details you’ll need to install and
operate your new Switch, in addition to expert troubleshooting
advice—in the unlikely event of a problem.
• 6 Ft. USB Cable (F1DN104F model only)
• User Manual
Important: This Switch is equipped with active anti-tamper
triggers. Any attempt to open the enclosure will activate the
anti-tamper triggers and render the unit inoperable. If the
unit’s enclosure appears disrupted or if all the port leDs flash
continuously, please call belkin Technical Support at
(800) 282-2355.
Secure DVI-I KVM Dual-Head Switch with Audio
1
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
Security features
The Belkin Secure DVI-I Dual-Head KVM Switch is the most
advanced and secure commercially available KVM Switch available
today. Below is a summary of all the security features incorporated
into the Switch.
unidirectional Data Paths
Optical diodes used in USB data paths provide high isolation and
prevent data leakage.
Solid-Aluminum, uni-body enclosure
Dedicated Processors
The one-piece aluminum enclosure reduces the entry points into
the Switch’s electronics and minimizes radiated signals that can be
snooped or intercepted.
The Switch features a dedicated processor per computer port. This
keeps each computer running on different security levels physically
separated and secure at all times, and prevents any unintended data
leakage between computers.
Active Anti-Tamper Triggers
no Memory buffer
Active chassis anti-tamper triggers prevent KVM electronics from
being accessed and tampered with.
The Switch does not have a memory buffer and does not have the
ability to store data. This prevents any keystrokes or other data
input from being unintentionally transferred as you switch between
computers, ensuring the integrity of your data.
Tamper-evident Tape
A holographic security tamper-evident label is placed on the
enclosure to provide a visual indication if the Switch has been opened
or compromised.
non-reprogrammable firmware
The Switch features custom firmware that is not reprogrammable,
preventing the ability to tamper with the KVM logic.
Secure DVI-I KVM Dual-Head Switch with Audio
2
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
Tamper-Proof Hardware
Secure Packaging
All integrated circuits are soldered directly to the printed circuit board
to prevent tampering with the components.
“Tear away” packaging ensures secure delivery of the Switch as it is
routed to the end user.
Protected Display Information
nIAP listing
Protected DDC/EDID emulation prevents software weaknesses that
can cause data leakage while maintaining compatibility with the
console display.
The Switch is listed by the National Information Assurance Partnership
(NIAP). It is NIAP Common Criteria validated to EAL 2+ (Evaluation
Assurance Level 2).
uSb Device Detection
Storage and other unsafe USB devices are rejected when connected
to the Switch. Only mouse and keyboard data are passed through.
Secure DVI-I KVM Dual-Head Switch with Audio
3
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
other features
The Belkin Secure DVI-I Dual-Head KVM Switch was designed with
the user in mind for today’s IT environment. Below is a summary of
some features incorporated into the Switch.
Port Coloring
The included color chips can be inserted into each
port-selector button.
uSb Support
Colors can be associated with an established network to facilitate
port identification and reduce user switching error.
The Switch is compatible with USB technology and supports
plug-and-play connectivity with USB computers, keyboards,
and mice.
Port naming
The included network-name labels can be placed in the area
underneath the port-selector button to facilitate port identification and
reduce user switching error.
DVI-I Support
The Switch supports both digital and analog video signals. Analog
signals are passed through.
leD Indicators
Dual-link/Dual-Display DVI Support
Each port button number illuminates to indicate that the console
currently controls the corresponding computer. As a port selector is
pushed, the LED number will light up.
The Switch supports video resolutions of up to 2560x1600 for up to
two displays. This includes support for digital displays 24 inches
and larger.
Integrated Mounting rails
Audio Switching
Integrated mounting system for easy under-desk or
side-wall mounting.
Allows you to share speakers between computers.
Secure DVI-I KVM Dual-Head Switch with Audio
4
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
equipment requirements
Cables
Belkin highly recommends you use Belkin Dual DVI/USB KVM Cable
Kits for your Switch to help ensure superior performance. These
cables offer the highest quality possible to ensure optimal data and
video transmission. One Cable Kit is required per
connected computer
Belkin Dual DVI-D/USB KVM Cable Kits with audio:
F1D9014b06 – 6 ft. (1.8m)
F1D9014b10 – 10 ft. (3m)
F1D9014b15 – 15 ft. (4.6m)
Belkin CAC USB A/B Cable (F1DN104F model only)
F1D9013b06 – 6 ft. (1.8m)
F1D9013b10 – 10 ft. (3m)
F1D9013b15 – 15 ft. (4.6m)
note: Due to USB and DVI signal limitations, the cable length cannot
exceed 15 feet (4.6m).
Secure DVI-I KVM Dual-Head Switch with Audio
5
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
System requirements
operating-System (oS) Platforms
Keyboards
The Switch is compatible with computers running on, but not limited
to, the following OS platforms:
• USB-compatible (non-composite)
• (or) PS/2-compatible
• Windows® 2000
Mice
• Windows XP (Home/Professional)
• Windows 2003 Server
• Windows 7
• USB-compatible (non-composite)
• (or) PS/2-compatible
• Windows Vista®
Monitors
• Red Hat® Linux®
• Digital displays with DVI-D support, single-link and dual-link
• Analog displays with VGA support
• Other Linux distributions
• Mac OS® X v10.3 and higher
Common Access Card readers
(F1DN104F model only)
• USB-compatible CAC or smart-card readers
Secure DVI-I KVM Dual-Head Switch with Audio
6
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
unit Display Diagram, front View
Tamper-evident Seal
Port Selector
leD Indicator
IMPorTAnT
noTICe:
If for any reason
the tamper-evident
seal is missing,
appears disrupted,
or looks different
than the example
shown here, please
call Belkin Technical
Support at (800)
282-2355.
CAC enable Switch
(f1Dn104f model only)
name label Guide
Color Chip
(F1DN104F model shown)
Secure DVI-I KVM Dual-Head Switch with Audio
7
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
unit Display Diagram, back View
Console uSb
Mouse Port
Console uSb
Keyboard Port
Computer DVI, uSb,
Audio, and CAC Ports
Computer CAC uSb Port
(f1Dn104f model only)
Video Diagnostic leDs
PS/2 Console Ports
DC Power Jack
CAC
Audio
M
Audio
K/M
CAC
Mounting
Track
Mounting
Track
Console
12V, 1.5A
Video
4
Console uSb CAC reader Port
(f1Dn104f model only)
Console Monitor Ports
Console Audio
Input Jack
Secure DVI-I KVM Dual-Head Switch with Audio
8
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
Specifications
Part No.:
F1DN104E, F1DN104F
Console CAC Input:
Console Monitor Port:
Console Speaker:
USB Type A (F1DN104F model only)
2 DVI-I dual-link female
3.5mm female
Enclosure:
Metal enclosure with high-impact
plastic faceplate
Power Requirements:
12V DC, 1.5A (minimum)
power adapter with
center-pin-positive polarity
CPU Keyboard/Mouse Ports: USB Type B
CPU CAC Ports: USB Type B
CPU Keyboard/Mouse Ports: USB Type B
AC Input:
100 to 240VAC
No. of Secure Channels:
No. of Users Supported:
No. of Computers Supported:
Monitors Supported:
4
1
4
CPU Audio:
3.5mm female
CPU Monitor Ports:
Port Selectors:
LED Indicators:
Operating Temp:
Storage Temp:
Humidity:
2 DVI dual-link female
4
2 single-link and dual-link digital
DVI-D displays; analog VGA
monitors with adapter
4
32° to 104° F (0° to 40° C)
-4° to 140° F (-20° to 60° C)
0-80% RH, non-condensing
3 years
Resolution Support:
Up to 2560x1600
USB Type A
Console Keyboard Input:
Console Mouse Input:
USB Type A
Warranty:
Secure DVI-I KVM Dual-Head Switch with Audio
9
Download from Www.Somanuals.com. All Manuals Search And Download.
oVerVIeW
table of contents
sections
1
2
3
4
5
6
7
8
Dimensions:
(F1DN104E) 12.5 (W) x 6.4 (D) x 2.5 (H) inches
(F1DN104F) 12.5 (W) x 6.4 (D) x 2.5 (H) inches
Weight:
(F1DN104E) 4.85 lbs.
(F1DN104F) 4.9 lbs.
Made in the uSA
Secure DVI-I KVM Dual-Head Switch with Audio
10
Download from Www.Somanuals.com. All Manuals Search And Download.
InSTAllATIon
table of contents
sections
1
2
3
4
5
6
7
8
Pre-Configuration
Connection and Installation
Where to place the Switch:
Step 1 Connecting the Console to the Switch
The enclosure of the Switch is designed for desktop or under-mount
configuration. An optional Mount Kit (Belkin part number F1D008)
is available.
Warning: Before attempting to connect anything to the Switch or your
computers, please ensure that all computer equipment and devices
are powered off.
Connect your monitors, keyboard, mouse, and speaker to the rear of
the Switch in the “User Console” section. (Refer to diagram on page 8)
Consider the following when deciding where to place the Switch:
Step 2 Power up
• your proximity to the port selectors on the front of the Switch
2.1 Power on the monitors.
• the lengths of the cables attached to your keyboard, monitor,
and mouse
2.2 Power up the KVM Switch by connecting the power. The display
diagnostic LEDs should be solid green a few seconds after
power up. This indicates the display EDID information has been
captured and secured. If the display diagnostic LED remains
blinking for longer than 10 seconds after power up, refer to the
Troubleshooting section of this user manual.
• the location of your computers in relation to your console
• the lengths of the cables you use to connect your computers
to the Switch
Warning: Avoid placing cables near fluorescent lights,
air-conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Secure DVI-I KVM Dual-Head Switch with Audio
11
Download from Www.Somanuals.com. All Manuals Search And Download.
InSTAllATIon
table of contents
sections
1
2
3
4
5
6
7
8
Step 3 Connecting Computers to the Switch
3.1 Make sure all computers are powered off.
Step 4 Powering up the Computers
Power up all the attached computers and check for display
and peripheral functionality. All computers can be powered on
simultaneously.
3.2 Using the Belkin Dual DVI/USB KVM Cable Kit, connect the
computers to a port on the rear of the KVM Switch. (Refer to
diagram on page 8)
note: The Cable Kit must be connected directly to a free USB port on
your computer, with no USB hubs or other devices in between.
note: Your computers should recognize the Switch and automatically
install the HID USB driver if necessary. Refer to the Troubleshooting
section of this manual if you are having problems with the USB
keyboard or mouse.
When you power on your computers, the Switch emulates both a
mouse and keyboard on each port and allows your computers to
boot normally. The computer connected to port “1” will be displayed
on the monitor. Check to see that the keyboard, monitor, and mouse
are working normally. Proceed to do this with all occupied ports to
verify that all computers are connected and responding correctly.
If you encounter an error, check your cable connections for that
computer and reboot. If the problem persists, please refer to the
Troubleshooting section in this User Manual.
Secure DVI-I KVM Switch with Audio
12
Download from Www.Somanuals.com. All Manuals Search And Download.
InSTAllATIon
table of contents
sections
1
2
3
4
5
6
7
8
Color Code Chip Installation
Port name label
The KVM Switch’s port-selector buttons can be color-coded for easier
identification. Refer to the installation instructions below. Note: You
may have to remove the existing black color chip first.
The included network-name labels can be placed in the area
underneath the port-selector buttons for port identification.
Insert color chip
Remove color chip
with a standard paperclip
Secure DVI-I KVM Dual-Head Switch with Audio
13
Download from Www.Somanuals.com. All Manuals Search And Download.
oPerATInG THe SWITCH
table of contents
sections
1
2
3
4
5
6
7
8
operation
Selecting a Computer using Port Selectors
Now that you have connected your console and computers to the
Switch, it is ready for use. You can select which computer you wish
to control by pressing the corresponding port selector on the front of
the Switch. The LED number will illuminate to indicate which computer
(or port) is currently selected. It may take approximately 1 second for
the video signal to sync after switching ports. This is normal behavior
and is dependent on the display connected. This is normal operation
and ensures that proper synchronization is established between the
monitor and the connected computers.
Keyboard and mouse inputs can only be sent to the selected
computer, and video outputs can only be received from the selected
computer. The Switch also prevents any data transfer between
connected computers, ensuring the security of your computers.
Please note that the default port at power-up is port 1. In case
of a power failure or if the power is cycled, the Switch will
default to port 1.
Secure DVI-I KVM Dual-Head Switch with Audio
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CoMMon ACCeSS CArD (CAC) ConfIGurATIon AnD InSTAllATIon
table of contents
sections
1
2
3
4
5
6
7
8
Step 1 Installation
CAC (Common Access Card) Configuration and
operation (F1DN104F model only)
1.1 Using the included USB cable, connect one end of the cable to
the computer that requires CAC, and the other end to the CAC
port on the KVM Switch that corresponds to the computer.
CAC connection to the computer requires a separate USB cable
connection and allows the user to specify whether there is a
CAC required for that computer or not. This allows the CAC to be
connected and controlled separately to the keyboard, mouse, video,
and audio.
1.2 Enable CAC for the same port connection in Step 1.1 by switching
the CAC switch to the right.
1.3 Repeat steps above for additional computers that require CAC.
Make sure that the CAC switch is disabled (left) for all other
non-connected CAC systems.
notice: The CAC functionality was not certified by Common
Criteria. Currently, Common Criteria does not offer any guidelines
for CAC peripheral support in the Peripheral Sharing Protection
Profile. The inclusion of this functionality does not affect the
Common Criteria certification applied to the rest of the product.
1.4 Once configured, the CAC connection will be switched only when
required by the connected computer. When switching from a CAC-
enabled port to a non-CAC-enabled port, the CAC connection will
remain with the last previously selected port where the CAC was
set to “Enable.”
Secure DVI-I KVM Dual-Head Switch with Audio
15
Download from Www.Somanuals.com. All Manuals Search And Download.
freQuenTly ASKeD QueSTIonS
table of contents
sections
1
2
3
4
5
6
7
8
What does “nIAP Common Criteria validation to eAl” mean?
To learn more about NIAP Common Criteria and EAL, visit
Can I use the Switch with a computer that does not
support uSb?
The Switch is designed to work with USB-capable computers. Call
your sales rep for Secure KVM accessories that allow support of
different input and video formats.
What do I do if I find that the tamper-evident seal on the Switch
has been removed or disrupted?
Does the Switch require an AC adapter?
Please call Belkin Technical Support at (800) 282-2355 immediately.
The KVM Switch’s circuitry may have been compromised.
Yes, the Switch requires a 12-volt DC, 1.5-Amp (minimum) power
adapter in order to function properly.
How far can the Switch be from my computer?
Does the Switch support linux?
The Switch can be located up to 15 feet (4.6m) away from your
computer due to DVI- and USB-cable limitation.
Yes, the Switch works with Red Hat Linux and other Linux
distributions configured for USB support.
Do I have to install software to use the Switch?
What computer equipment does the KVM support?
No, the Switch does not require any software to be installed in
your computers.
The Switch is compatible with systems and peripherals from Dell, HP,
ClearCube, WYSE, Microsoft, Logitech, etc. Please contact Belkin
Technical Support at (800) 282-2355 for compatibility issues you
may experience.
Secure DVI-I KVM Dual-Head Switch with Audio
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TroubleSHooTInG
table of contents
sections
1
2
3
4
5
6
7
8
I am getting a black screen on my monitor.
General
• Check that all video cables are inserted properly.
My computer does not boot when connected to the Switch but
works fine when I connect my keyboard, video, and mouse
directly to my computer.
• Check that there is proper voltage available to the power adapter
and that it is inserted correctly.
• Connect your monitor directly to the computer to verify that your
monitor is functioning properly.
• Make sure that the DVI/USB KVM Cable Kit is connected tightly
between the Switch and the computer.
• Reboot the computer.
Video
The display diagnostic leD does not stop blinking.
I am getting ghosting, shadowing, or fuzzy images on
my monitor.
• Check that the cable that connects to the monitor is inserted
properly on both ends.
• Check that all video cables are inserted properly to the Switch,
computer, and monitor.
• Check that the monitor is powered on.
• With everything connected, power-cycle the KVM Switch to reset
the video. Make sure the Video Diagnostic LED is solid green.
• Power-cycle the KVM unit by removing and reattaching the
power plug.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Try a different monitor.
• Lower the video resolution of your monitor.
• Check that the video-cable length does not exceed 15 feet (4.6m).
• Check that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
• Connect the monitor directly into the computer you are having
trouble with to see if the problem still appears.
Secure DVI-I KVM Dual-Head Switch with Audio
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TroubleSHooTInG
table of contents
sections
1
2
3
4
5
6
7
8
Keyboard
Mouse
The computer does not detect my keyboard, or my keyboard does
not work when I switch computers or reboot.
The computer does not detect my mouse, or my mouse does not
work when I switch computers or reboot.
• Check that the keyboard you are using is connected properly to
the Switch.
• Check that the mouse you are using is connected properly
to the Switch.
• Check that the USB cable between the Switch and the computer
is completely connected.
• Check that the USB cable between the Switch and the computer
is completely connected.
• Try connecting to a different USB port on the computer.
• Try connecting to a different USB port on the computer.
• Make sure the keyboard works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
• Make sure the mouse works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
• Make sure you are not using a keyboard with an integrated USB
hub or other USB-integrated devices.
• Make sure you are not using a keyboard with an integrated USB
hub or other USB-integrated devices.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• Try a different keyboard.
• Try a different mouse.
The CAPS, nuM, and Scroll lock lights on my keyboard do not
function when I connect to the KVM Switch.
This is normal operation. The lock-state information is fully functional.
Due to the security of the KVM Switch and known exploitation of
lock-state information for leakages, the LED status is not supported.
Please refer to the operating system for verification of the lock-state
information for CAPS, NUM, and Scroll Lock.
Secure DVI-I KVM Dual-Head Switch with Audio
18
Download from Www.Somanuals.com. All Manuals Search And Download.
InforMATIon
table of contents
sections
1
2
3
4
5
6
7
8
belkin International, Inc., limited 3-year Product Warranty
What this warranty covers.
fCC Statement
DeClArATIon of ConforMITy WITH fCC ruleS for
eleCTroMAGneTIC CoMPATIbIlITy
Belkin International, Inc. (“Belkin”) warrants to the original purchaser
of this Belkin product that the product shall be free of defects in
design, assembly, material, or workmanship.
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa
Vista, CA 90094, declare under our sole responsibility that the
products: f1Dn104e, f1Dn104f
What the period of coverage is.
to which this declaration relates:
Belkin warrants the Belkin product for three years.
Comply with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
What will we do to correct problems?
Product Warranty.
received, including interference that may cause undesired operation.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product). Belkin
reserves the right to discontinue any of its products without notice,
and disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is unable to repair or
replace the product (for example, because it has been discontinued),
Belkin will offer either a refund or a credit toward the purchase of
another product from Belkin.com in an amount equal to the purchase
price of the product as evidenced on the original purchase receipt as
discounted by its natural use.
Ce Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility
that the products F1DN104E and F1DN104F, to which this declaration
relates, are in conformity with Emissions Standard EN55022 and with
Immunity Standard EN55024.
ICeS
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme á la norme NMB-003
du Canada.
Secure DVI-I KVM Dual-Head Switch with Audio
19
Download from Www.Somanuals.com. All Manuals Search And Download.
InforMATIon
table of contents
sections
1
2
3
4
5
6
7
8
What is not covered by this warranty?
2. Your Belkin Customer Service Representative will then instruct
you on how to forward your receipt and Belkin product and how to
proceed with your claim.
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin determines that the Belkin
product has been improperly installed, altered in any way, or
Belkin reserves the right to review the damaged Belkin product. All
costs of shipping the Belkin product to Belkin for inspection shall
be borne solely by the purchaser. If Belkin determines, in its sole
discretion, that it is impractical to ship the damaged equipment to
Belkin, Belkin may designate, in its sole discretion, an equipment
repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from
such repair facility and of such estimate shall be borne solely by the
purchaser. Damaged equipment must remain available for inspection
until the claim is finalized. Whenever claims are settled, Belkin
reserves the right to be subrogated under any existing insurance
policies the purchaser may have.
tampered with. The Belkin Product Warranty does not protect against
acts of God such as flood, lightning, earthquake, war, vandalism,
theft, normal-use wear and tear, erosion, depletion, obsolescence,
abuse, damage due to low voltage disturbances (i.e. brownouts or
sags), non-authorized program, or system equipment modification
or alteration.
How to get service.
To get service for your Belkin product you must take the
following steps:
1. Contact Belkin International, Inc., at 12045 E. Waterfront Drive,
Playa Vista, CA 90094, Attn: Customer Service, or call
(800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
Secure DVI-I KVM Dual-Head Switch with Audio
20
Download from Www.Somanuals.com. All Manuals Search And Download.
InforMATIon
table of contents
sections
1
2
3
4
5
6
7
8
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES,
IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS
WARRANTY.
Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES
SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS
ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do not
allow the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
Secure DVI-I KVM Dual-Head Switch with Audio
21
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. Windows, Windows Vista, Microsoft, and IntelliMouse are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|