Photo Printer
Series
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Printer
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Canon PIXMA iP6700D Photo Printer Quick Start Guide.
Copyright
This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual
may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.
© 2006 Canon U.S.A., Inc.
Disclaimer
Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use
guide to your Canon PIXMA iP6700D Photo Printer. All statements, technical information and recommendations
in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness
thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be,
representation or warranties concerning the products described.
Specifications are subject to change without notice.
As an ENERGY STAR partner, Canon U.S.A., Inc., has determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
All information regarding non-Canon products was compiled from publicly available information. No
representation is made regarding the accuracy thereof.
About Consumables
Consumables (ink tanks/FINE Cartridges) are available for 5 years after production has stopped.
Trademarks
ꢀ
“Windows” and “Internet Explorer” are trademarks of Microsoft Corporation, registered in the United States
and other countries.
ꢀ
ꢀ
ꢀ
“Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
“SmartMedia” is a trademark of Toshiba Corporation.
“MEMORY STICK”, “Memory Stick PRO”, “MEMORY STICK Duo” and “Memory Stick PRO Duo” are trademarks
of Sony Corporation.
“xD-Picture Card” is a trademark of Fuji Photo Film Co., Ltd.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
“MultiMediaCard” is a trademark of Infineon Technologies AG.
“SD Card” and “miniSD Card” are trademarks of SD Association.
“IrDA Feature Trademark” is owned by the Infrared Association and used under license therefrom.
“Bluetooth” is a trademark of Bluetooth SIG,Inc.,U.S.A. and are licensed to Canon Inc.
“Adobe” and “Adobe RGB(1998)” are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
ꢀ
“Photo Rag” is a trademark of Hahnemühle FineArt GmbH.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
Bluetooth ID: B02165
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Basic Printing
Turning on the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Turning off the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using Specialty Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Printing with Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Printing with Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Canceling Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Accessing the Printer Driver (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Bundled Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Printing Maintenance
Replacing an Ink Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
When Printing Becomes Faint or Colors are Incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Troubleshooting
Cannot Install the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cannot Connect to PC Properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Print Results Not Satisfactory or Contains Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Troubleshooting Printer Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Paper Does Not Feed Properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
An Error Message is displayed on the Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
POWER Lamp and Alarm Lamp Flash Alternately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Appendix
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Basic Printing
This Quick Start Guide describes some of the features of your printer and how
to use them. For more information, view the iP6700D User’s Guide, Printer
Driver Guide, and Photo Application Guide installed on your computer, or use
the online help within your printer driver interface:
While in the printer’s properties window, press the F1 key, or click in the
upper right corner. Then click the feature you want to know more about, or click
the Help button when displayed.
While in the Page Setup dialog box or Print dialog box, click
corner.
in the lower left
Clicking provides detailed information about each setting.
When the Help window appears, select your desired topic.
Turning on the Printer
1
Press the POWER button.
The POWER lamp flashes while the printer warms up and changes to steady (non-
flashing) when the printer is ready.
ꢀ If the Alarm lamp lights, refer to “An Error Message is Displayed on the
LCD” in the Direct Printing Guide.
ꢀ If the POWER lamp and the Alarm lamp flash alternately, see “POWER
Lamp and Alarm Lamp Flash Alternately” on page 43.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Turning off the Printer
1
To turn off the printer, press the POWER button.
When the POWER lamp stops blinking, the printer is turned off.
About the Power Plug
When removing the power plug after turing off the printer, be sure to
check that the POWER lamp is not lit. If the power plug is removed from
the wall outlet with the POWER lamp lit or blinking, the printer cannot
protect its print heads and may be unable to print.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Loading Paper
This section describes how to load paper in the auto sheet feeder and the cassette.
Auto sheet feeder
Cassette
ꢀ Print Media to Avoid
Do not use the following types of paper. Using such paper will not only produce
unsatisfactory results, but can also cause the printer to jam or malfunction.
• Folded, curled or wrinkled paper
• Damp paper
• Excessively thin paper (less than 64 gsm or 17 lb)
• Excessively thick paper* (more than 105 gsm or 28 lb)
*
non-Canon genuine paper
• Picture postcards
• Postcards affixed with photos or stickers
• Envelopes with double flaps
• Envelopes with sticker flaps
• Envelopes with an embossed or treated surface
• Any type of paper with holes
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Using the Auto Sheet Feeder and the Cassette
You can load paper in both the auto sheet feeder and cassette.
Loading paper in the auto sheet feeder is easy, and is convenient if you frequently
switch to and print on various sizes or types of paper.
Loading paper in the cassette allows you to print without reloading paper for each job.
This is convenient for loading a certain type of paper, such as plain paper, you regularly
print onto.
Loading paper in both the auto sheet feeder and cassette makes the following paper
feed methods available:
*
Legal-sized paper and 2.13" x 3.39"/54.0 x 86.0 mm size paper, and Photo Stickers PS-101 are not loadable in the
cassette.
• Changing the paper source to feed different types/sizes of paper
If you load plain paper in the cassette and photo paper in the auto sheet feeder,
changing the paper source allows you to print on both types of paper without
removing and reloading paper. To change the paper source, use the Feed Switch
button on the printer or printer driver.
You can also specify the type/size of paper to be fed from the cassette for regular use
with the printer driver. For example, you can specify that Letter-sized plain paper is
always fed from the cassette whenever you print.
For information on the printer driver settings, refer to the Printer Driver
Guide.
You can switch between paper
loaded in the auto sheet feeder
(e.g., 4" x 6"/101.6 x 152.4
mm) and the cassette (e.g., A4/
Letter-sized paper).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
• Continuous printing on the same type/size of paper by using both the auto sheet
feeder and cassette together
If the auto sheet feeder or cassette runs out of paper, the paper source automatically
switches to the other one. This is useful for printing onto a large volume of paper. To
use this feature, you need to configure the printer driver beforehand.
For information on the printer driver settings, refer to the Printer Driver
Guide.
If the auto sheet feeder runs
out of paper, the paper source
automatically changes to the
cassette.
• Choosing the paper source to match the location of the printer
You can use just the auto sheet feeder or cassette according to the location of the
printer.
For example, if you intend to install the printer in a small place, such as on a shelf
with minimal space, you can use just the cassette for printing.
Legal-sized paper and 2.13" x 3.39"/54.0 x 86.0 mm size paper, and
Photo Stickers PS-101 are not loadable in the cassette.
If you intend to use only the cassette, check any usage restrictions in
advance.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Loading Plain Paper in the Auto Sheet Feeder
ꢀ For detailed information on the specialty media Canon provides for use
with its various printers, see “Using Specialty Media” on page 18.
ꢀ Refer to “Printing Media” in the User’s Guide for detailed instructions
on how to load specialty media into the printer.
1
Flatten the four corners of the paper before loading it.
When paper is curled, gently bend it in the opposite direction of the curl
(without curling the reverse side) and then load the paper. How to flatten
paper curl, refer to “Media is curled” on page 38
2
Prepare to load paper.
2
(1) 1 Open the paper support.
2 Pull out the paper
support extension to
support the paper.
1
1
Auto sheet feeder lamp
2
(2) 1 Put your fingers in the notches in
either side of the front cover and
pull down to open it.
(3) Press the Feed Switch
button so that the auto
sheet feeder lamp lights.
2 Pull out the paper output tray
extension completely.
You can also select the paper source with the printer driver. For details,
refer to the Printer Driver Guide.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Load the paper.
3
Load limit mark
Do not load beyond this load limit mark.
(1) Load the paper
into the auto
sheet feeder with
the print side
facing UP.
(2) Align the paper stack
against the cover
guide on the right
side of the paper
support.
(3) Pinch the paper
guide and slide
it against the
Ensure that the
cover guide
stands when
you load paper
in the auto
left side of the
paper stack.
sheet feeder.
ꢀ You can use general copy paper or Canon’s Super White Paper.
ꢀ You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the auto sheet feeder.
However, the paper may not feed correctly depending on the type of
paper and the environment (temperature, high humidity and low
temperature or low humidity). If this happens, reduce the number of
sheets of paper by about half (approximately 5 mm/0.2 inches).
ꢀ Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Loading Envelopes in the Auto Sheet Feeder
Use either DL Env. or Comm. Env. #10 size envelopes.
The address is rotated automatically to match the direction of the envelope when
printing.
ꢀ Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
ꢀ Select either DL Env. or Comm. Env. #10 in the printer driver according
to the envelope size you are using. If you do not, the address will be
printed in the wrong direction.
Fold the envelope
flap shut.
(1) Load the envelope
against the cover
guide on the right side
of the paper support
with the front face UP,
and the rear flaps
(2) Pinch the
DOWN on the left.
paper guide
and slide it
against the
left side of
Ensure that the
cover guide
stands when
you load paper
in the auto
the envelope.
sheet feeder.
A maximum of
10 envelopes
can be loaded at
once.
(3) Press the Feed Switch
button so that the auto
sheet feeder lamp lights.
Printing direction
(4) Select Envelope in Media Type, and then select DL Env. or Comm. Env. #10 in
Page Size.
For a detailed description of the printer driver settings, see “Printing with
Windows” on page 20, “Printing with Macintosh” on page 24.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Loading Other Small-Sized Paper in the Auto Sheet Feeder
Cutting plain paper to 4" x 6"/101.6 mm x 152.4 mm, 5" x 7"/127.0 x
177.8 mm, or 2.13" x 3.39"/54.0 x 86.0 mm (Credit Card) size for a trial
printing can cause paper jams.
(1) Load the paper into the
auto sheet feeder with
the print side facing UP
and align the cover guide
on the right side of the
paper support.
Ensure that the
cover guide stands
when you load
paper in the auto
sheet feeder.
• Load the paper lengthways
regardless of the direction of
the document.
• You can load up to 20 sheets
of 4" x 6" or 2.13" x 3.39"
(Credit Card)-sized paper; 10
sheets of 5" x 7"-sized
paper.
(2) Pinch the paper guide and slide it
against the left side of the paper
stack.
(3) Press the Feed Switch
button so that the auto
sheet feeder lamp lights.
(4) Select 4 x 6 in 101.6 x 152.4 mm, 5 x 7 in 127.0 x 177.8 mm, or Credit Card 2.13
x 3.39 in 54.0 x 86.0 mm from Page Size in the printer driver.
For a detailed description of the printer driver settings, see “Printing with
Windows” on page 20, or “Printing with Macintosh” on page 24.
Always load paper in portrait orientation. Loading paper in
landscape orientation can cause the paper to be jammed.
Portrait
Landscape
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
We recommend using genuine Canon photo media when printing
photographs.
See “Using Specialty Media” on page 18.
ꢀ Loading Plain Paper in the Cassette
Ensure that the paper is loadable in the cassette. Legal-sized paper, 2.13" x 3.39" /
54.0 x 86.0 mm size paper, and Photo Stickers are not loadable in the cassette.
ꢀ For detailed information on the specialty media Canon provides for use
with its various printers, see “Using Specialty Media” on page 18.
ꢀ Refer to “Printing Media” in the User’s Guide for detailed instructions
on how to load specialty media into the printer.
1
Flatten the four corners of the paper before loading it.
When paper is curled, hold the opposing curled corners and gently bend
them in the opposite direction until the paper becomes completely flat.
2
Prepare to load paper.
(1) Pull out the cassette from
the printer.
(2) Remove the cover on the
cassette.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Adjust the size of the Cassette.
3
When loading A5- or larger sized paper (nonstandard-size paper: 203 mm/8 inches
or more in length), extend the cassette.
When loading 5" x 7"- or smaller sized paper (nonstandard-size paper: less than 203
mm/8 inches in length), do not extend the cassette.
Legal-sized paper, 2.13" x 3.39"/54.0 x 86.0 mm size paper, and Photo
Stickers are not loadable in the cassette.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
4
Load the paper. (Print side facing DOWN)
Load limit mark
Do not load beyond this load limit
mark.
(1) Load the paper into the cassette
with the print side facing DOWN.
(2) Align the paper stack against the
right side of the cassette.
(3) Slide the paper guides to fit the
loaded paper stack.
ꢀ You can use general copy paper or Canon’s Super White Paper.
ꢀ You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the cassette. However, do not stack more
than 50 sheets in the paper output tray.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
5
Insert the Cassette into the printer.
(1) Set the cover on the
cassette.
(2) Insert the cassette into the
printer.
Push the cassette all the way
into the printer.
If the cassette has been extended to accommodate paper sizes larger
than 5" x 7", the front edge of the cassette will extend beyond the front of
the printer.
6
Prepare the Paper Output Tray.
(1) 1 Put your fingers in the notches
in either side of the front cover
and pull down to open it.
2 Pull out the paper output tray
extension completely.
1
Cassette
lamp
2
(2) Press the Feed Switch button so
that the cassette lamp lights.
ꢀ You can also select the paper source with the printer driver. For details,
refer to the Printer Driver Guide.
ꢀ Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Loading Envelopes in the Cassette
Use either DL Env. or Comm. Env. #10 size envelopes.
The address is rotated automatically to match the direction of the envelope when
printing.
ꢀ Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
ꢀ Select either DL Env. or Comm. Env. #10 in the printer driver according
to the envelope size you are using. If you do not, the address will be
printed in the wrong direction.
(1) Align the envelope stack
against the right side of
the cassette.
Fold the envelope flap shut.
The flap of the envelope
will appear with its flap
facing UP on the left
side.
A maximum of 5
envelopes can be
loaded at once.
(2) Slide the paper guide against
the side of the envelope.
(3) Press the Feed Switch button
so that the cassette lamp
lights.
Printing direction
(4) Select Envelope in Media Type, and then select DL Env. or Comm. Env. #10 in
Page Size.
For a detailed description of the printer driver settings, see “Printing with
Windows” on page 20, “Printing with Macintosh” on page 24.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Loading 4" x 6" or 5" x 7"-Sized Paper in the Cassette
ꢀ Do not leave photo paper, such as Photo Paper Pro, in the cassette for a
long time. This may cause paper discoloration due to natural aging.
ꢀ Cutting plain paper to 4" x 6"/101.6 mm x 152.4 mm or 5" x 7"/127.0 x
177.8 mm size for a trial printing can cause paper jams.
(1) Load the paper into the cassette
with the print side facing DOWN.
• Do not extend the cassette.
• Load the paper lengthways regardless of
the direction of the document.
• You can load up to 20 sheets of 4" x 6"-
sized paper or 10 sheets of 5" x 7"-sized
paper.
(2) Align the paper stack against the
right side of the cassette.
(3) Slide the paper guides to fit the
loaded paper stack.
(4) Press the Feed Switch button so
that the cassette lamp lights.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
(5) Select 4 x 6 in 101.6 x 152.4 mm or 5 x 7 in 127.0 x 177.8 mm from Page Size in
the printer driver.
For a detailed description of the printer driver settings, see “Printing with
Windows” on page 20, or “Printing with Macintosh” on page 24.
Always load paper in portrait orientation. Loading paper in
landscape orientation can cause the paper to be jammed.
Portrait
Landscape
We recommend using genuine Canon photo media when printing
photographs.
See “Using Specialty Media” on page 18.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Using Specialty Media
Canon recommends that you use Canon genuine paper to ensure optimal print quality.
ꢀ Photo Quality Media
• High Resolution Paper
• Glossy Photo Paper
ꢀ Media Suited for Business
Documents
• High Resolution Paper
• Matte Photo Paper
• Photo Paper Plus Double Sided
• Photo Paper Plus Glossy
• Photo Paper Plus Semi-Gloss
• Photo Paper Pro
• Fine Art Paper “Photo Rag™”
• Photo Stickers
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ Canon genuine paper
Media Type
Paper Support Load Limit
Auto Sheet Feeder Cassette
Up to 80 sheets Up to 80 sheets
Printer Driver Setting
for Media Type
High Resolution
Paper
High Resolution
Paper
Super White Paper Up to 13 mm or
0.52 inches
Up to 13 mm or
0.52 inches
Plain Paper
Glossy Photo Paper Letter: up to 10
sheets
Letter: up to 10
sheets
Glossy Photo Paper
4" x 6": up to 20
sheets
4" x 6": up to 20
sheets
2.13" x 3.39": up to 2.13" x 3.39": not
20 sheets
loadable*3
Matte Photo Paper Letter: up to 10
sheets
Letter: up to 10
sheets
Matte Photo Paper
4" x 6": up to 20
sheets
4" x 6": up to 20
sheets
Photo Paper Plus
Double Sided*1
Letter: up to 10
sheets
Letter: up to 10
sheets
Photo Paper Plus
Double Sided
5" x 7": up to 10
sheets
5" x 7": up to 10
sheets
Photo Paper Plus
Glossy*1
Letter: up to 10
sheets
Letter: up to 10
sheets
Photo Paper Plus
Glossy
5" x 7": up to 10
sheets
5" x 7": up to 10
sheets
4" x 6": up to 20
sheets
4" x 6": up to 20
sheets
Photo Paper Plus
Semi-Gloss*1
Letter: up to 10
sheets
Letter: up to 10
sheets
Photo Paper Plus
Glossy
8" x 10": up to 10
sheets
4" x 6": up to 20
sheets
4" x 6": up to 20
sheets
Photo Paper Pro*1 Letter: up to 10
sheets
Letter: up to 10
sheets
Photo Paper Pro
8" x 10": up to 10
sheets
4" x 6": up to 20
sheets
4" x 6": up to 20
sheets
Fine Art Paper
“Photo Rag”*4*5
Letter: 1 sheet
Not loadable
Fine Art Photo Rag
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Media Type
Paper Support Load Limit
Printer Driver Setting
for Media Type
Auto Sheet Feeder Cassette
Photo Stickers*2*6 1 sheet
T-Shirt Transfers 1 sheet
Not loadable*3
Photo Paper Plus
Glossy
1 sheet
T-Shirt Transfers
*1 When loading a stack of paper, the printed side may be marked when it is fed in. If this happens, load paper one
sheet at a time.
*2 You can specify the print setting easily by using the Easy-PhotoPrint provided with the Setup CD-ROM.
*3 Feeding from the cassette can damage the printer. Always load in the auto sheet Feeder.
*4 Canon genuine paper is produced and stored to get optimum printing quality. We recommend using Canon genuine
paper.
*5 If you are using this paper, you cannot print in the 35 mm/1.38 inches margin on the top and bottom edges.
If you choose a special paper size for Fine Art Paper in the printer driver, a limit is set to prevent printing in the 35
mm/1.38 inches margin on the top and bottom edges of the paper.
We recommend checking the area being printed in the preview screen before printing.
Refer to the Printer Driver Guide.
*6 You can print photos in a memory card or digital camera on the Canon Photo Stickers without a computer. For details,
refer to the Direct Printing Guide.
ꢀ When using plain paper (64 gsm or 17 lb), up to 150 sheets (13 mm or
0.52 inches in height) can be loaded in the auto sheet feeder and
cassette respectively. Select Plain Paper from Media Type in the printer
driver.
ꢀ For a detailed description of printing media types, refer to the User’s
Guide.
Printing with Windows
ꢀ Menu and command names may differ between software applications, and
more steps may be required. For details, refer to the documentation for each
software application you use.
ꢀ The steps described in this section are for printing in Windows® XP Service
Pack 2 (hereafter, called Windows XP SP2).
ꢀ You can use Easy-PhotoPrint to easily do print operations when printing
photographs. Easy-PhotoPrint is provided on the Setup CD-ROM. For details
on how to use Easy-PhotoPrint, refer to the Photo Application Guide.
1
Turn on the printer.
See “Turning on the Printer” on page 2.
2
Load the paper in the printer.
See “Loading Paper” on page 4.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
3
Ensure that the proper paper source is selected.
When the auto sheet feeder lamp is
lit, paper is fed from the auto sheet
feeder.
When the cassette lamp is lit, paper
is fed from the cassette.
4
5
Create a document or open a file to print.
Open the printer properties dialog box.
(1) Select Print from the application software’s File menu.
The Print dialog box opens.
(2) Ensure that your printer
is selected.
(3) Click Preferences or
Properties.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Specify the required settings.
6
(1) Click Media Type to select
the type of media loaded in
the printer.
Ensure that Paper Feed
Switch is selected from
Paper Source.
(2) Click OK.
ꢀ From the Page Setup tab, select the correct document size to be
printed. If the size is different from that set in the application, then you
need to set it to the same size or use Scaled Printing or Fit-to-Page.
Refer to the Printer Driver Guide.
ꢀ This section describes the procedure for selecting the paper source
with the Feed Switch button on the printer. For a detailed description of
the Paper Source settings, refer to the Printer Driver Guide.
ꢀ To adjust the Print Quality settings, select Custom and click Set on the
Main tab. You can control the print quality in the Custom dialog box.
ꢀ For details about other printer driver functions, click Help or
Instructions to view the Help or Printer Driver Guide. Instructions is
displayed on the Main and Maintenance tabs only. If the On-screen
Manual is not installed, Instructions is not displayed.
ꢀ Selecting the Preview before printing check box displays a preview
screen that allows you to confirm the selected printing effects and how
your document will look when printed. Some applications do not have
a preview function.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
7
Print the document.
(1) Click Print or OK.
You can cancel a print job in progress by simply pressing the Stop/Reset
button on the printer.
See “Canceling Printing” on page 27.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Printing with Macintosh
ꢀ Menu and command names may differ between software applications, and
more steps may be required. For details, refer to the documentation for each
software application you use.
ꢀ The steps described in this section are for printing in Mac® OS X v.10.4.x
(hereafter called Macintosh®).
ꢀ You can use Easy-PhotoPrint to easily do print operations when printing
photographs. Easy-PhotoPrint is provided on the Setup CD-ROM. For details
on how to use Easy-PhotoPrint, refer to the Photo Application Guide.
1
Turn on the printer.
See “Turning on the Printer” on page 2.
2
3
Load the paper on the printer.
See “Loading Paper” on page 4.
Ensure that the proper paper source is selected.
When the auto sheet feeder lamp is
lit, paper is fed from the auto sheet
feeder.
When the cassette lamp is lit, paper
is fed from the cassette.
4
Create a document or open a file to print.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
5
Select Paper Size.
(1) Select Page Setup from the application software’s File menu.
The Page Setup dialog box opens.
(2) Confirm that iP6700D is
selected in Format for.
(3) Select the desired
paper size from Paper
Size.
(4) Click OK.
6
Specify the required settings.
(1) Select Print from the application software’s File menu.
The Print dialog box opens.
(2) Select Quality &
Media from the pop-
up menu.
(3) Select the desired
media type from
Media Type.
(4) Ensure that Paper
Feed Switch is
selected from Paper
Source.
(5) Select the print mode
appropriate to your
document from Print
Mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
ꢀ This section describes the procedure for selecting the paper
source with the Feed Switch button on the printer. For a detailed
description of the Paper Source settings, refer to the Printer
Driver Guide.
ꢀ When you select the print mode appropriate to your document
from Print Mode, the document will be printed in color and at a
print quality suited to the characteristics of the Media Type you
have selected.
- Printing a top-quality photo: Select when printing documents
consisting mainly of photographs and graphics featuring fine
color gradation.
- Printing tables and charts: Select when printing documents
consisting mainly of graphs and graphics (illustrations) with
strong color definition.
- Printing a composite document: Select when printing
documents consisting mainly of text.
- Detailed Setting: Select to fine-tune the Print Quality and
Halftoning settings.
(6) Select Color Options
from the pop-up menu.
ꢀ For details about the printer driver, refer to the Printer Driver
Guide.
ꢀ To view the Printer Driver Guide, click
on any Print dialog box
that has a Quality & Media, Color Options, Special Effects,
Borderless Printing, or Margin selected from the pop-up menu. If
the On-screen Manual is not installed, the Printer Driver Guide is
not displayed even if
is clicked.
ꢀ Clicking the Preview button displays a preview screen that allows
you to confirm the selected printing effects and how your
document will look when printed. Some applications do not have
a preview function.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
7
Print the document.
(1) Click Print.
You can cancel a print job while printing.
See “Canceling Printing” on page 27.
Canceling Printing
You can cancel a print job while printing, with the Stop/Reset button on the printer.
1
Press the Stop/Reset button while printing.
(1) Press the Stop/Reset button.
Printing is canceled and paper is fed out.
You can also cancel a print job by clicking Cancel Printing on the Canon IJ
Status Monitor. To display the Canon IJ Status Monitor, click Canon
iP6700D on the taskbar.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
1
Click the printer’s icon in the Dock and display the list of print jobs in
progress.
If you are using Mac OS X v.10.2.8, click on the printer icon in the Dock to start up
the Print Center and double-click on the name of your printer in the Printer List to
open a list of print jobs in progress.
2
Select an undesired document and click the Delete icon.
The print job is deleted.
To temporarily stop a job in progress, click Hold. To cancel all the jobs in
the list, click Stop Jobs.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Accessing the Printer Driver (Windows)
The printer properties dialog box can be opened from either within an application, or
directly from the Windows Start menu.
This manual refers to Windows XP SP2 operation.
The operations may vary depending on the version of your Windows operating
system.
ꢀ Opening the Printer Properties Dialog Box from Your Application
Program
Depending on your application program, the command and menu names
may differ, and there may be more steps involved in opening the printer
properties dialog box. For more details, see the user’s manual for your
application.
1
In your application program, select the command to print a document.
The Print dialog box can usually be opened by selecting Print from the File menu.
2
Ensure that the name of your printer is selected. Then click Preferences (or
Properties).
The printer properties dialog box opens.
ꢀ Opening the Printer Properties Dialog Box Directly from the Start
Menu
This method is used for printer maintenance, and configuring shared print settings for
all application programs.
1
Click Start and select Control Panel, Printers and Other Hardware, and then
Printers and Faxes.
For non-Windows XP, click Start, select Settings, and then Printers.
2
Select the icon of your printer.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Printing
Open the File menu and select Printing Preferences (or Properties).
3
The printer properties dialog box opens.
When opening the printer properties dialog box from Properties, the tabs related to
the Windows function (e.g., the Ports tab, or the Details tab) are displayed. These
tabs are not displayed, when the printer properties dialog box is opened from
Printing Preferences or application programs. For details about these tabs, refer to
the Windows documentation.
For details on how to set each function, refer to the Help or Printer Driver
Guide.
Using the Bundled Software
The Setup CD-ROM includes photo applications designed to edit the photographs taken by a
digital camera and print them as photo-lab quality prints without standard white borders.
Please use the application(s) suitable for your print purposes.
ꢀ To install applications, refer to the Easy Setup Instructions.
ꢀ For details about using the photo applications, refer to the Photo Application
Guide.
ꢀ Easy-PhotoPrint (Windows/Macintosh)
You can make a Borderless Print easily and quickly, just by selecting a photograph
taken with a digital camera and the paper type on which to print. Also it has tools to
correct red eye caused by the camera’s flash or smooth and beautify the facial skin. It
is compatible with ExifPrint*.
ꢀ PhotoRecord (Windows)
You can create fun and unique photo albums with the decorative themes such as frame,
background, and clip-art. You can also copy or move the decorated photos.
It is compatible with ExifPrint*.
ꢀ Easy-WebPrint (Windows)
You can easily print out homepages displayed on Internet Explorer® in full size without
its right-hand side being cropped. This application is automatically added to the
Internet Explorer toolbar. Internet Explorer 6.0 is recommended.
For more information on the applications, refer to the Photo Application Guide.
*
ExifPrint is the worldwide standard. Under ExifPrint, the digital camera can record data tags for specific camera
settings and functions such as whether the flash was on or off, if the camera was in portrait or night scene mode, etc.
Canon PIXMA Printers support ExifPrint and use a suitable photo application to read the camera data precisely,
producing optimal prints. This enables you to create prints that reproduce color more accurately.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Maintenance
Printing Maintenance
Replacing an Ink Tank
Replace ink tank(s) if they are out of ink. When replacing them, check the model numbers
and their installation positions.
With this printer, the ink tanks must be installed in the order (from left to right) indicated
below:
ꢀ Black: CLI-8BK
ꢀ Cyan: CLI-8C
ꢀ PhotoMagenta: CLI-8PM
ꢀ Magenta: CLI-8M
ꢀ Yellow: CLI-8Y
ꢀ PhotoCyan: CLI-8PC
ꢀ Be sure to install the ink thanks in the correct order. The proper
arrangement from the left is Black, Cyan, Photo Cyan, Photo Magenta,
Magenta, Yellow.
ꢀ Should missing characters or white streaks appear despite sufficient
ink levels, see “When Printing Becomes Faint or Colors are Incorrect”
on page 32.
For details, refer to “Replacing an Ink Tank” in the Direct Printing Guide.
ꢀ To maintain optimal print quality, use an ink tank within six months of
its first use.
ꢀ Once an ink tank has been used, do not remove it from the printer and
leave it out in the open. This will cause the ink tank to dry out and the
printer may not operate properly if it is reinstalled.
ꢀ Color ink consumption may occur even when black-and-white or
grayscale printing is specified.
Color ink is consumed in the head cleaning and deep cleaning, which
are necessary to maintain the printer’s capabilities.
ꢀ When you start printing after replacing the ink tank, the printer
executes Print Head Cleaning automatically. Do not perform any other
operations until the Print Head Cleaning finishes.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Maintenance
When Printing Becomes Faint or Colors are Incorrect
When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the
print head nozzles are probably clogged. Follow the procedures below to clean the nozzles.
If the ruled lines are shifted after running the print head maintenance, align the print head.
Before printing the nozzle check pattern or cleaning the Print Head, check the
following;
ꢀ Open the cover and make sure that all the ink tanks click into place and then
their lamps light red.
If any one of the lamps is flashing, the associated ink tank is empty or
running low. Replace the ink tank. Refer to “Replacing an Ink Tank” in the
Direct Printing Guide.
If an ink tank lamp is flashing even though ink remains in that ink tank, it is
inserted in the wrong position. Make sure that the correct ink tank color is
inserted in each position. Open the cover and make sure all the ink tank
lamps are lit. Refer to “Replacing an Ink Tank” in the Direct Printing Guide.
If the ink tank lamp is unlit, press the
mark on the ink tank to fully insert
it. Make sure that all packaging material is peeled off the ink tank. Refer to
“Replacing an Ink Tank” in the Direct Printing Guide.
ꢀ Increase the Print Quality setting in the printer driver settings.
See “Print Results Not Satisfactory or Contains Errors” on page 36.
Step 1
Refer to “Printing the Nozzle Check Pattern” in the Direct Printing Guide.
After print head
cleaning, print the
nozzle check pattern.
If missing lines or white stripes appear
Step 2
Refer to “Print Head Cleaning” in the Direct Printing Guide.
If the problem remains after performing print head cleaning twice
Step 3
Refer to “Print Head Deep Cleaning” in the Direct Printing Guide.
If Print Head Deep Cleaning does not resolve the problem, the print head may
be detective. Contact the Customer Care Center.
ꢀ If the ruled lines are shifted
Step 1
Refer to “Aligning Print Head-Auto head align” in the Direct Printing Guide.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
This section provides troubleshooting tips for the most common printing problems.
Troubleshooting usually falls into one of the following categories.
Refer to the User’s Guide for additional information on topics not covered in this section.
When an error message is displayed on the LCD, refer to “An Error Message is Displayed on
the LCD” in the Direct Printing Guide. When photos cannot be printed properly from a digital
camera, refer to “Cannot Print Properly from the Digital Camera” in the Direct Printing
Guide.
ꢀ “Cannot Install the Printer Driver” on page 34
ꢀ “Cannot Connect to PC Properly” on page 35
ꢀ “Print Results Not Satisfactory or Contains Errors” on page 36
ꢀ “Troubleshooting Printer Hardware” on page 39
ꢀ “Paper Does Not Feed Properly” on page 41
ꢀ “Paper Jams” on page 41
ꢀ “An Error Message is displayed on the Screen” on page 42
ꢀ “POWER Lamp and Alarm Lamp Flash Alternately” on page 43
When an Error Occurs
When an error occurs in printing such as the printer is out of paper or paper jams, a
troubleshooting message is displayed automatically. Take the appropriate action described
in the message.
The message may vary depending on the version of your Windows operating system.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Cannot Install the Printer Driver
Problem
Possible Cause
Try This
Cannot Install the Installation
Printer Driver
Follow the Easy Setup Instructions packaged with your printer for proper printer
driver installation.
procedure not
followed correctly
If the installer was forced to be terminated due to an error, Windows may be
unstable. Remove the CD-ROM from the CD-ROM drive and restart your computer.
Reinstall the printer driver. If this problem persists, refer to your Windows
documentation for more information.
Installation does
not start
If the printer driver installation did not start automatically when you inserted the
Setup CD-ROM into the CD-ROM drive:
automatically when
the Setup CD-ROM
is inserted into the
drive
1. Click Start and select My Computer.
2. Double-click the CD-ROM icon.
For non-Windows XP, open the My Computer window, and then double-click the
CD-ROM icon.
Double-click the CD-ROM icon on your desktop to start installation.
If the CD-ROM icon is not displayed on the desktop, there is a problem with the CD-
ROM. Contact the Customer Care Center.
Reinstall the printer driver.
1. Click Cancel on the Printer Connection
screen.
2. Click Start Over on the Installation
Failure screen.
Unable to proceed
beyond the Printer
Connection screen
3. Click Back on the screen that appears
next.
4. Click Exit on the Welcome screen, then
remove the CD-ROM.
5. Turn the printer off.
6. Check the cable connection.
7. Restart the computer.
8. Make sure no other applications
(including anti-virus programs) are
running.
9. Carefully follow the procedures
described in the Easy Setup
Instructions and reinstall the driver.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Cannot Connect to PC Properly
Problem
Possible Cause
Try This
Printing Speed Is Your environment is If your environment is not fully compatible with USB 2.0, the printer will operate at
Slow/USB 2.0 Hi- not fully compatible a lower speed provided under USB 1.1.
Speed
Connection Does
Not Work.
with USB 2.0.
Check the following to ensure that your PC environment supports USB 2.0 Hi-
Speed connection.
ꢀ
The USB port on your PC supports USB 2.0 Hi-Speed connection.
ꢀ
Both the USB cable and USB hub support USB 2.0 Hi-Speed connection.
Be sure to use a certified USB 2.0 Hi-Speed cable. You are recommended to use
the cable no longer than 3 meters.
ꢀ
ꢀ
Your PC supports the USB 2.0 Hi-Speed connection.
Obtain the latest version of the OS update program and install it on your PC.
The USB 2.0 Hi-Speed driver operates properly.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on your
PC.
For details on checking the above, contact the maker of your
computer, USB cable, or USB hub.
Your environment is See “Printing Speed Is Slow/USB 2.0 Hi-Speed Connection Does Not Work.”
not fully compatible above.
with USB 2.0.
When You
Connect to a
Computer
Running
Windows XP, the
Screen Shows
the Warning
Message “Hi-
speed USB
device plugged
intonon-hi-speed
USB hub” or
“This device can
perform faster”.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Print Results Not Satisfactory or Contains Errors
Problem
Possible Cause
Try This
Ink does not eject
Print head nozzles are Open the cover and check if all ink tanks lamp are lit.
properly/Printing is clogged
Blurred/Colors are
Wrong/White
Refer to “Replacing an Ink Tank” in the Direct Printing Guide.
Print the nozzle check pattern to check for uneven ink output.
Refer to “Printing the Nozzle Check Pattern” in the Direct Printing Guide.
Streaks appear
When a specific color is missing from the nozzle check pattern, clean the print
head.
Refer to “Print Head Cleaning” in the Direct Printing Guide.
Print head is
misaligned
Perform Automatic Print Head Alignment.
Refer to “Aligning Print Head-Auto head align” in the Direct Printing Guide.
If this does not solve the problem, refer to “Manual Print Head Alignment” in
“Routine Maintenance” of the User’s Guide and align the print head manually.
Paper loaded wrong
side up
Check the print side of the paper.
Follow the instructions packaged with your specialty media for
loading and handling.
Incorrect paper type
On the Main tab of the printer driver, ensure that the Media Type selected
matches the paper loaded.
In the Print dialog box of the printer driver, select Quality & Media from the
pop-up menu, and then ensure that the Media Type selected matches the
paper loaded.
Glossy photo paper
Select Other Photo Paper from Media Type. It may resolve the problem. Load
other than the Canon one sheet at a time and remove each sheet as soon as it is printed.
genuine paper is used
Print Quality is not set Be sure to set the Print Quality setting to High in Windows, or Fine in
properly
Macintosh.
1. Open the printer properties dialog box.
2. On the Main tab, click High for the Print Quality setting.
When you cannot choose the High setting or when the print quality does
not improve, select Custom, click Set and then adjust the Quality bar for
higher print quality.
1. Open the Print dialog box.
2. Select Quality & Media from the pop-up menu and then click Detailed
Setting.
3. Drag the Print Quality slide bar to the Fine end.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Try This
Printed Ruled Lines Print head is
are Displaced
Align the print head. Refer to “Aligning Print Head-Auto head align” in the
Direct Printing Guide.
misaligned
Print Quality not set
properly
Be sure to set the Print Quality setting to High in Windows, or Fine in
Macintosh.
1. Open the printer properties dialog box.
2. On the Main tab, click High for the Print Quality setting.
When you cannot choose the High setting or when the print quality does
not improve, select Custom, click Set and then adjust the Quality bar for
higher print quality.
1. Open the Print dialog box.
2. Select Quality & Media from the pop-up menu and then click Detailed
Setting.
3. Drag the Print Quality slide bar to Fine end.
Printed Paper Curls Paper being used is
too thin
Use photo paper such as Canon’s Photo Paper Pro to print photos or pictures
in deep color that have high color saturation.
or Ink Blots
Incorrect paper type
On the Main tab of the printer driver, ensure that the Media Type selected
matches the paper loaded.
In the Print dialog box of the printer driver, select Quality & Media form the
pop-up menu, and then ensure that the Media Type selected matches the
paper loaded.
Printed Surface is
Scratched/Back of type is used
Paper is Smudged
Inappropriate paper
Check to see if the paper you are printing on is too thick or curled.
See “Print Media to Avoid” on page 4.
Note that smudging may occur at the top and bottom edges of the paper when
using Borderless Printing. Ensure that the paper you are using is compatible
with Borderless Printing.
Paper feed roller is
dirty
Clean the paper feed roller.
Refer to “Back of Paper is Smudged/Paper Does Not Feed Properly/Printed
Surface is Scratched” in “Troubleshooting” of the Direct Printing Guide.
Inside of the printer is If the inside of the printer is dirty, printed paper may be smudged. Periodically
dirty
clean the inside of the printer.
Refer to “Cleaning the Inside of the Printer” in “Routine Maintenance” of the
User’s Guide.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Try This
Printed Surface is
Scratched/Back of
Paper is Smudged
Thick paper is used
Select the Prevent paper abrasion check box to widen the clearance between
the Print Head and the loaded paper.
Clear the Prevent paper abrasion check box once printing is
complete, and then click Send.
1. Open the printer properties dialog box.
2. Click the Maintenance tab and then Custom Settings.
3. Select the Prevent paper abrasion check box and click Send.
Click OK when the confirmation message appears.
1. Open the Canon IJ Printer Utility dialog box.
2. Select Custom Settings from the pop-up menu.
3. Select the Prevent paper abrasion check box and click Send.
Click OK when the confirmation message appears.
When Prevent paper abrasion is selected in the printer properties dialog box
(Windows) or selected from Custom Settings in the Canon IJ Printer Utility
dialog box (Macintosh), the setting is also applied under direct printing with
the digital camera.
Media is curled
If all four corners or the printing surface of the paper is curled, the paper may
become dirty or the paper may not feed properly. Use the paper after
correcting paper curl as follows.
1. Face up the printing surface*1, and cover it with a non-printing regular
paper to avoid damaging the surface.
2. Roll up the paper in a direction opposite to paper curl as the figure below.
3. Check the printing paper if paper is corrected within approximately 2 to 5
.
mm/0.08 to 0.2 inches*2
It is recommended to print the curl-corrected paper one sheet at a time.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting Printer Hardware
Problem
Possible Cause
Try This
Printer Does Not Ink tank is empty
Start or Printer
Stops During
If the ink tank lamp is flashing fast, ink is empty. Replace the ink tank and close
the cover. If printing is not finished yet, just press the OK button on the printer to
continue printing in the “no ink” state. Replace the ink tank as soon as possible
after printing finishes.
Print Jobs
Continuing to print in the “no ink” state may cause damage to the printer. Refer to
“Replacing an Ink Tank” in the Direct Printing Guide.
If multiple ink tank lamps are flashing, check how fast they flash. Fast
flashing (at about a second interval) indicates the ink is empty. Slow
flashing (at about three second interval) indicates ink is low. For
details on different flashing speeds, Refer to “Getting the Ink Level
Information” in the Direct Printing Guide.
Ink tank is not
installed in the
correct position
If an ink tank lamp is flashing even though ink remains in that ink tank, it is
inserted in the wrong position. Make sure that the correct ink tank color is inserted
in each position. Open the cover and make sure all the ink tank lamps are lit.
Refer to “Replacing an Ink Tank” in the Direct Printing Guide.
Ink tank is not fully When the ink tank lamp is unlit, press the mark on the ink tank until it clicks
inserted
into place. The ink tank lamp lights red when the ink tank is fully inserted.
Make sure all of the orange tape is peeled off the ink tank as illustrated in Figure 1.
If any orange parts are left like in Figure 2, remove all of the orange parts.
(1) Correct
An L shaped notch
appears on the ink
tank.
(2) Incorrect
There remains the
orange tape. Peel off
the tape completely
along the perforation.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Try This
Printer Does Not There may be
Restart your computer. It may solve the problem.
Start or Printer
Stops During
Print Jobs
problems with your
operating system
Delete an undesired print job, if there is any. Use Canon IJ Status Monitor in
Windows or Printer Setup Utility (or Print Center) in Macintosh for the deletion.
1. Open the printer properties dialog box.
See “Opening the Printer Properties Dialog Box Directly from the Start Menu”
on page 29.
2. Click the Maintenance tab and then View Printer Status.
3. Click Display Print Queue.
4. Select Cancel All Documents in the Printer menu.
In Windows XP and Windows 2000
The print jobs may not be selected.
5. When the confirmation message is displayed, click Yes.
The print job is deleted.
In Windows Me and Windows 98
Click to select an undesired document and select Purge Print
Documents in the Printer menu.
1. Select Applications from the Go menu.
2. Double-click the Printer Setup Utility icon in the Utilities folder.
When using Mac OS X v.10.2.8, double-click the Print Center icon.
3. Double-click the name of your printer displayed under Name in the Printer List.
4. Click to select an undesired document and click
The print job is deleted.
.
Cannot Print to
End of Job
Incorrect page size Ensure that the page size setting matches the size of the paper loaded in the
is selected
printer:
ꢀ
Check the Page Size setting from within your application to ensure that it
matches the size of the paper loaded.
ꢀ
Check Page Size on the Page Setup tab in the printer properties dialog box of
the printer driver (Windows) or the Page Setup dialog box of the printer driver
(Macintosh) to ensure that it matches the size of the paper loaded.
Check the size of the print data. For Windows XP and Windows 2000, if the size of
the data is too large, part of it may be lost. When the spool format is EMF, follow
the procedure below.
The size of the print
data is too large
1. Open the printer properties dialog box.
2. On the Page Setup tab, click Print Options.
3. Select the Reduce spool data size check box, and click OK.
When Reduce spool data size is set, the print quality may be
degraded.
Performing
automatic duplex
printing
Select Use reduced printing in the printer driver. It may solve the problem.
Print layout may be altered with the reduced printing function.
1. Open the printer properties dialog box.
2. Click Print Area Setup in the Page Setup tab and select Use reduced printing.
1. In the Print dialog box, select Duplex Printing & Margin from the pop-up menu.
2. Select Automatic Duplex Printing, and select Use reduced printing in Print
Area.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Paper Does Not Feed Properly
Problem
Possible Cause
Try This
Paper Does Not
Feed Properly
Inappropriatepaper Check to see if the paper you are printing on is too thick or curled.
type is used
See “Print Media to Avoid” on page 4.
Flatten paper when it is curled.
Paper feed roller is Clean the paper feed roller.
dirty
Refer to “Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface
is Scratched” in “Troubleshooting” of the Direct Printing Guide.
Paper is loaded
incorrectly
Load in the portrait orientation regardless of the print direction of the auto sheet
feeder or cassette.
Ensure that paper is loaded correctly. Slide the paper guides against the paper
stack. See “Loading Paper” on page 4.
A large quantity of Depending on the environment in which it is used (high temperature/high
plain paper is
loaded in the auto
sheet feeder
humidity/low temperature/low humidity), some types of plain paper may not feed
correctly.
If this happens, reduce the number of pages loaded to about the half the
recommended maximum (stack approx. 5 mm or 0.2 inches high).
Paper Jams
Problem
Possible Cause
Try This
Paper Jams
Paper jams in the
Remove the paper in the paper output slot/auto sheet feeder. Refer to “Paper
paper output slot/ jams” in “Troubleshooting” of the Direct Printing Guide.
auto sheet feeder
Landscape Credit
Card-sized Paper
Jams inside the
Printer
Remove the paper inside of the printer. Refer to “Paper jams” in
“Troubleshooting” of the Direct Printing Guide.
Landscape 4" x 6"/
101.6 x 152.4 mm
size paper loaded
in the cassette jams
inside the printer
Paper jams inside
the printer
(Transport Unit)
Remove the paper inside of the printer (Transport Unit). Refer to “Paper jams” in
“Troubleshooting” of the Direct Printing Guide.
Paper jams inside
the printer
Remove the paper inside of the printer (Duplex Transport Section). Refer to “Paper
jams” in “Troubleshooting” of the Direct Printing Guide.
(Duplex Transport
Section)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
An Error Message is displayed on the Screen
Problem
Possible Cause
Printer is not ready Ensure that the POWER lamp lights.
Try This
If the POWER lamp is off, turn the printer on.
The POWER lamp will flash when the printer is initializing. Wait until the POWER
lamp stops flashing.
Writing Error/
Output Error/
Communication
Error
When the Alarm lamp lights, an error may occur in the printer. For details on how
to resolve the error, refer to “An Error Message is Displayed on the LCD” in the
Direct Printing Guide.
Paper is not loaded Load paper and press the OK button.
If paper is loaded, ensure that the paper source is selected correctly. Select the
paper source with the Feed Switch button on the printer, or select it in the
printer driver.
Printer port setting Check the printer port settings.
does not match the
interface connected
to the printer
1. Click Start and select Control Panel, Printers and Other Hardware, and then
Printers and Faxes.
For non-Windows XP, click Start, select Settings, and then Printers.
2. Select the icon of your printer.
3. Open the File menu and select Properties.
4. Click the Port tab (or the Details tab) to confirm the port settings.
A USB port is selected if either USBnnn (Canon iP6700D) or MPUSBPRNnn
(Canon iP6700D) (where n is a number) is indicated.
If the port setting is not correct, change the port setting according to the
interface you are using on the Ports tab (or the Details tab), or reinstall the
printer driver.
Faulty connection
Ensure that the printer cable is securely connected to the computer.
ꢀ If using a switching hub or other device, disconnect the printer
and reconnect it directly to the computer and try printing again.
If successful, the problem may have been with the device.
ꢀ There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Printer driver is not Uninstall then reinstall the printer driver.
installed properly
1. Click Start, and select All Programs (or Programs), the name of your printer,
and Uninstall.
2. Follow the on-screen instructions to uninstall the driver.
3. Follow the procedures described in the Easy Setup Instructions and reinstall
the printer driver.
Cannot print with
Automatic Duplex
Printing
Incorrect paper size Check the Page Size setting from within your application to ensure that it
is selected
matches the size of the paper loaded.
Check Page Size on the Page Setup tab in the printer properties dialog box
(Windows) or the Page Setup dialog box (Macintosh) to ensure that it matches
the size of the paper loaded.
The sizes of media suitable for automatic duplex printing are Letter-sized and 5"
x 7"/127.0 x 177.8 mm.
To print on both sides of the page manually, follow the procedure
below.
On the Page Setup tab, clear the Automatic check box. Then try printing again.
The manual duplex printing function cannot be used.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Printer is not ready Ensure that the POWER lamp lights.
Try This
If the POWER lamp is off, turn the printer on.
The POWER lamp will flash when the printer is initializing. Wait until the POWER
lamp stops flashing.
“Error No.: 300”
When the Alarm lamp lights, an error may occur in the printer. For details on how
to resolve the error, refer to “An Error Message is Displayed on the LCD” in the
Direct Printing Guide.
Printer is not
properly connected
Ensure that the printer is securely connected to the computer.
ꢀ If using a switching hub or other device, disconnect the printer
and reconnect it directly to the computer and try printing again.
If successful, the problem may have been with the device.
ꢀ There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Printer you want to Select iP6700D on the Printer pop-up menu on the Print dialog box.
use is not selected
on the Printer
If iP6700D does not appear on the Printer pop-up menu, do the following to
confirm the printer settings:
1. Select Print and Fax Preferences from the Printer pop-up menu.
When using Mac OS X v.10.3.x or Mac OS X v.10.2.8, select Edit Printer List
popup menu on the
Print dialog box
from the Printer pop-up menu.
2. Ensure that iP6700D is displayed and the check box is selected in the screen
that is displayed.
When using Mac OS X v.10.2.8, ensure that iP6700D is displayed in the
Printer List.
3. If iP6700D is not displayed in the screen displayed in step 2, click Add(+) to
add the printer.
If you cannot add the printer, follow the procedures described in Easy Setup
Instructions and reinstall the driver.
Ink absorber is
almost full
The printer has a built-in ink absorber to hold the ink used during print head cleaning, for
example. This error message indicates that this ink absorber is nearly full.
Press the OK button to clear the error so you can continue printing. Before the
ink absorber becomes completely full, contact the Customer Care Center.
When you experience this error, you will need to call for servicing to replace ink
absorber and to check the printer for proper operation.
“Error No.: 1700”
Inner cover is open Close the inner cover, then press the OK button.
when printing
starts
“Error No.: 1851”
“Error No.: 1856”
“Error No.: 2001”
Inner cover is
opened while
printing
Close the inner cover, then press the OK button.
One page of the print data being sent at the time of the error will be erased, so
print that page again.
A specified period
of time has elapsed
without receiving a
response from the
digital camera/The
digital camera or
digital video
Disconnect the camera cable, and reconnect it.
Depending on the model or brand of your PictBridge compliant device,
you may have to select a print mode before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the printer.
Perform necessary operations according to the instruction manual
supplied with your device.
camcorder
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer.
PictBridge-compatible digital camera or digital video camcorder can be
connected to your printer for Direct Printing.
connected is not
compatible with
this printer
Automatic Print
Head alignment
failed
Refer to “An Error Message is Displayed on the LCD” in the Direct Printing
Guide.
“Error No.: 2500”
POWER Lamp and Alarm Lamp Flash Alternately
Problem
Possible Cause
Try This
POWER Lamp and
Alarm Lamp Flash
Alternately
An error that requires Disconnect the printer cable from the printer, and then turn the printer off and
contacting the unplug the printer from the power supply. Plug the printer back in and turn the
Customer Care Center printer back on after leaving it for a while.
may have occurred
If the problem remains, contact the Customer Care Center.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Appendix
Specifications
Printer
Maximum resolution (dpi):
9600 (horizontal)* x 2400 (vertical)
Ink droplets can be placed with a pitch of 1/9600 inch at
minimum.
*
Print speed *
Black printing (text pattern)
Max speed (custom setting 5): 18 ppm
Standard: 6.5 ppm
*
Print speed may vary depending on system
configuration, software, document complexity,
print mode and page coverage.
Color printing
Max Speed (Custom Setting 5): 17 ppm
Standard: 4.9 ppm
Print width:
203.2 mm max. (8.0 inches)
(for Borderless Printing: 215.9 mm/8.5 inches)
Interface (USB):
USB 2.0 Hi-Speed/Direct Print Port/IrDA v.1.2/
Bluetooth v.1.2 (option)
*
All operations are not guaranteed for computers standard-
equipped with a USB 2.0 Hi-Speed interface.
*
Since the USB 2.0 Hi-Speed interface is fully upwardly
compatible with USB Full-Speed (USB 1.1), it can be used at USB
Full-Speed (USB 1.1).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Printer
Acoustic noise level:
Approx. 35 dB (A) (in the highest print quality mode)
Operating environment:
Storage environment:
Power supply:
Temperature: 5 to 35°C (41 to 95°F)
Humidity: 10 to 90%RH (no condensation)
Temperature: 0 to 40°C (32 to 104°F)
Humidity: 5 to 95% RH (no condensation)
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Power consumption:
Standby: Approx. 2.0 W
Printing: Approx. 17 W
OFF: Approx. 0.8 W
Dimensions
(with the Paper Support and Paper Output
Tray retracted):
429 (W) x 304 (D) x 183 (H) mm
16.89 (W) x 11.97 (D) x 7.2 (H) inches
Weight:
7.5 kg (16.50 lb.)
Print Head:
512 (256 x 2) nozzles of each color
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Camera Direct Print (PictBridge)
Paper size
Default (Selections based on the printer setting)
10 x 15 cm/4" x 6" (Photo Paper Plus Glossy, Photo Paper
Pro, Photo Paper Plus Semi-Gloss, Glossy Photo Paper,
Photo Stickers*1
)
13 x 18 cm/5" x 7" (Photo Paper Plus Glossy)*2
A4/8.5" x 11" (Letter) (Photo Paper Plus Glossy A4/Letter,
Photo Paper Pro A4/Letter, Photo Paper Plus Semi-Gloss
A4/Letter, Glossy Photo Paper A4/Letter, Plain Paper A4/
Letter)
5.4 x 8.6 cm/Credit Card (Glossy Photo Paper Credit Card)
*1
Canon-brand sticker. Printing on this paper is available only
when the Layout function on your camera has a 16-up option.
Refer to “Printing Photographs Directly from a PictBridge
Compliant Device” in the Direct Printing Guide.
*2
If using a Canon PictBridge-compatible camera, you can select it.
Paper type
Layout
Default (Selections based on the printer setting), Photo
(Photo Paper Plus Glossy, Photo Paper Plus Semi-Gloss,
Glossy Photo Paper), Fast Photo (Photo Paper Pro), Plain
Paper (Only A4/Letter)
Default (Selections based on the printer setting),
Borderless, Bordered, N-up (2, 4, 9, 16)*1, 35-up*2
*1
Layout compatible with Canon-brand sticker above.
For details, refer to “Printing Photographs Directly from a
PictBridge Compliant Device” in the Direct Printing Guide.
*2
Photos are printed in 35mm Film Style layout (contact printing
layout). This option can be selected for Canon PictBridge-
compliant devices only. (Note that this option cannot be used for
some models.)
For a Canon PictBridge-compliant device, selecting the item
displayed with the [i] icon prints the shooting information (Exif
data) in list format, or in the margins of specified photos. (Note
that these options cannot be used for some models.)
Trimming
Default (Off: No trimming), On (follow camera’s setting),
Off
Image optimize
Default (Selections based on the printer setting), VIVID*,
NR (Noise Reduction)*, VIVID+NR*, Face*
*
If using a Canon PictBridge-compatible camera, you can select it.
Date/File No. print
Default (Off: No printing), Date, File No., Both, Off
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
ꢀ Minimum System Requirements*1
*2
Interface
Operating System
Processor
RAM
Hard Disk
Space*4
USB 2.0 Hi-Speed
Windows XP SP1, SP2
PentiumIII*3
128 MB 400 MB
(Celeron 566 MHz)
Windows 2000 Professional SP4
Windows XP SP1, SP2
USB
PentiumII 300
MHz*3
Windows 2000 Professional SP2,
SP3, SP4
Windows Millennium Edition
Windows 98, 98 Second Edition
*2
Interface
Operating System
Processor
RAM
Hard Disk
Space*4
USB 2.0 Hi-Speed
USB
Mac OS X v.10.4
Intel processor
256 MB 250 MB
128 MB
PowerPC G3/G4/G5
Mac OS X v.10.2.8 - v.10.3
*1 Conform to the operating system's requirement when it is higher than this.
For updated compatibility, visit our website.
*2 Operation can only be guaranteed on a PC with built-in USB or USB 2.0 Hi-Speed port and pre-installed Windows XP, 2000,
Me, 98 or Mac OS X v.10.2.8 - v.10.4.
*3 Including compatible processors.
*4 For bundled software installation.
• CD-ROM drive
• Display : 800 x 600
Thousands Colors
• Display : 800 x 600
Color 16 bit
• Mac File System: Mac OS Extended (Journaled), Mac OS X Extended
ꢀ Additional Systems Requirements for On-screen Manuals
Browser: Help Viewer
Browser: Windows HTML Help Viewer
Note: The on-screen manual may not be displayed
properly depending on your operating system. We
recommend that you keep your system up to date.
Note: Microsoft Internet Explorer 5.0 or later must
be installed.
The on-screen manual may not be displayed
properly depending on your operating system or
Internet Explorer version. We recommend that you
keep your system up to date with Windows Update.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use
your printer safely. Do not attempt to use printer in any way not described in this manual.
You may cause an electric shock, fire or damage the printer if you ignore any of
these safety precautions.
Choosing a location
Power supply
Do not place the printer close to flammable solvents such as alcohol or thinners.
Never attempt to plug in or unplug the printer from the power supply when your hands are wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist the power cord.
Do not place heavy objects on the power cord.
Never plug the printer into a power socket that is shared with other
equipment (extension lead/cord, 2- or 3-way adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around the printer, immediately unplug
the printer at the power supply and call for service.
Periodically, unplug the printer and use a dry cloth to wipe off any dust or
dirt collected on the plug and the power outlet. If the printer is placed at a
location exposed to a lot of dust, smoke, or high humidity, the dust
collected on the plug absorbs moisture and may cause insulation failure
and fire.
Cleaning the printer
Use a damp cloth to clean the printer. Never use flammable solvents such
as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical components inside
the printer, it could cause a fire or electric shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the
printer.
Maintaining the printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside
the printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not
described in this guide.
Working around the
printer
Do not use flammable sprays near the printer.
This could cause a fire or electric shock if the spray comes into contact with electrical components
inside the printer.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
You may cause injury or damage the printer if you ignore any of these safety
precautions.
Choosing a location
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power supply
Ensure that the area around the power outlet is kept clear at all times so you
can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
Never use a power supply source other than the one rated for the printer in the country where you
purchased the printer.
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Working around the
printer
Never put your hands or fingers in the printer while it is printing.
Do not place any object on the printer.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for
service.
Do not transport or store the printer on a slant, vertically or upside-down, as the ink may leak and
damage the printer.
Print heads and ink tanks For safety reasons store Print Heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake Print Heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts or nozzles on a Print Head after
printing.
The metal parts may be very hot and could cause burns.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Regulatory Information
For 120v, 60Hz model
Model Number :K10255 (iP6700D)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ꢀ Reorient or relocate the receiving antenna.
ꢀ Increase the separation between the equipment and receiver.
ꢀ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
ꢀ Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
(For U.S.A. Only)
Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the
interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils numériques de Classe B
prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003 édictée par l’Industrie Canada.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only)
The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished
Canon-brand product (“Product”) packaged with this limited warranty, when purchased and used in the United States only.
The Product is warranted against defects in materials and workmanship under normal use and service (a) for a period of one
(1) year from the date of original purchase when delivered to you in new condition in its original container or (b) for 90 days
from the date of original purchase for refurbished Products. Defective parts or a defective Product returned to a Canon USA
repair facility or a Canon USA Authorized Service Facility (“ASF”), and proven to be defective upon inspection, will be repaired,
exchanged for new or comparable rebuilt parts, or exchanged for a refurbished Product, as determined by the Canon USA
repair facility or the ASF. Warranty repair or replacement shall not extend the original warranty period of the Product. A dated
proof of purchase is required at the time of warranty service. A copy of your dated bill of sale will satisfy this requirement. This
warranty does not cover any accessories, or any consumables, such as paper or ink cartridges, as to which there shall be no
warranty or replacement.
This limited warranty shall only apply if the Product is used in conjunction with compatible computers, peripheral equipment
and software. Canon USA shall have no responsibility for such items except for compatible Canon brand peripheral equipment
covered by a separate warranty (“Separate Warranty”). Repairs of such Canon brand peripheral equipment shall be governed
by the terms of the Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are
sold “as is” and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or
fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non-
Canon brand items is given by the manufacturer or producer thereof.
This limited warranty covers all defects encountered in normal use of the Product and does not apply in the following cases:
(a)
Loss of or damage to the Product due to abuse, neglect, mishandling, improper packaging by you, alteration, accident,
electrical current fluctuations, improper use, failure to follow operating or maintenance instructions in, or
environmental conditions prescribed in, Canon USA’s user’s manual or other documentation, or services performed by
someone other than a Canon USA repair facility or ASF. Without limiting the foregoing, dropping the Product, scratches,
and abrasions will be presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the
user’s manual or other documentation for the Product.
(b)
(c)
Use of parts or supplies (other than those sold by Canon USA) that cause damage to the Product or cause abnormally
frequent service calls or service problems.
If the Product has had its serial number or dating defaced, altered or removed.
ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON THE SOFTWARE DISKETTES OR CD-
ROMS ENCLOSED WITH, OR ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH OR FOR THE
PRODUCT, IS SOLD “AS IS” AND WITHOUT WARRANTY BY CANON USA. THE SOLE WARRANTY WITH RESPECT TO SUCH SOFTWARE
IS CONTAINED IN THE SOFTWARE MANUFACTURER’S LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY
LIMITATIONS AND DISCLAIMERS THEREON. PLEASE CONTACT CANON USA IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF
THE SOFTWARE MANUFACTURER’S LICENSE AGREEMENT.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER
EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE
PRODUCT SHALL BIND CANON USA, OR ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA SHALL NOT BE LIABLE FOR LOSS OF
REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR
CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR
INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA
OR ITS ASF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON
USA OR ITS ASF BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE
PRODUCT SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THE PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR
EXCLUSIVE REMEDY.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Canon USA offers a range of customer technical support* options:
ꢀ Interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked
ꢀ Toll-free live technical support Monday-Saturday (excluding holidays) at 1-800-828-4040
ꢀ Telephone Device for the Deaf (TDD-1-866-251-3752)
ꢀ Repair or Exchange Service Options:
In the event service is required for the Product during the limited warranty period, Canon USA offers two hardware support
options:
Authorized Service Facility Carry-In/Mail-In Service
Canon USA’s Carry-In/Mail-In Service provides repair or exchange, at Canon USA’s option, through Canon USA’s Authorized
Service Facility (ASF) network. The name and telephone number of the ASF(s) near you may be obtained from Canon USA’s Web
speaking to a technical support person. A Product covered by this limited warranty will be repaired or exchanged, as
determined by Canon USA, and returned without charge by the ASF.
InstantExchange Service **
A Canon Customer Care Center or ASF technician will attempt to diagnose the nature of the problem and, if possible, correct it
over the telephone. If the problem cannot be corrected over the telephone, and you elect the InstantExchange option, a
reference number will be issued to you. You will be asked for the Product serial number and other information pertaining to
your defective Product and for a ship-to location for the replacement Product (must include street address).
The Canon USA repair facility will ship out the replacement Product, via 2nd day Air freight service, prepaid by Canon USA.
After receipt of the replacement Product (with instructions and a prepaid waybill), follow the enclosed instructions on how to
ship the defective Product to the Canon USA repair facility. The defective Product must be returned in the shipping carton in
which the replacement Product was packed and include the reference number, A COPY OF YOUR DATED PROOF OF PURCHASE
(BILL OF SALE), and a complete explanation of the problem. DO NOT INCLUDE ANY OTHER ITEMS WITH THE DEFECTIVE PRODUCT
IN THE RETURN SHIPPING CARTON, AND BE SURE TO RETAIN YOUR PRINTHEAD AND INK CARTRIDGE(S) AND TANK(S).
InstantExchange Service expedites, usually by the second business day, the exchange of a defective Product with a
replacement Product, which will normally be shipped the same day if your request for this service is by 3 p.m. E.T. Monday
through Friday, except holidays (three (3) business day InstantExchange Service for Alaska and Hawaii). Canon USA does not
guarantee expedited shipping service in the event of the occurrence of factors beyond its reasonable control. The replacement
Product you receive may be a refurbished or reconditioned unit and will be covered for the balance of the period remaining on
your original limited warranty. NOTE THAT BY USING THIS SERVICE YOU WILL KEEP THE REPLACEMENT PRODUCT THAT IS SENT
TO YOU. CANON USA WILL RETAIN THE DEFECTIVE PRODUCT THAT YOU ORIGINALLY PURCHASED, WHICH SHALL BECOME THE
PROPERTY OF CANON USA. InstantExchange warranty program service is available only during the express limited-warranty
period for your Product and only in the continental United States, Alaska and Hawaii during such period.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
*
Support program specifics are subject to change without notice.
** InstantExchange warranty service is subject to the availability of refurbished or new replacement units.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
USA
Canon is a registered trademark of Canon Inc.
©2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may also be a registered
trademark in other countries.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
Loading Plane Paper in the Cassette............................. 11
A
M
Accessing the Printer Driver ......................................... 29
Aligning the Print Head ................................................ 32
An Error Message is displayed on the Screen ............... 42
Automatic Duplex Printing............................................ 42
Matte Photo Paper ....................................................... 19
Media
specialty .............................................................. 18
to avoid.................................................................. 4
Media Type .......................................................19, 22, 25
B
Borderless Printing ...................................................... 37
O
C
Opening the Printer Properties Dialog Box Directly from the
Start Menu (Windows) .............................................. 29
Opening the Printer Properties Dialog Box from Your
Application Program (Windows)................................ 29
Canceling Print Jobs ..................................................... 23
Canceling Printing........................................................ 27
Cannot Connect to PC Properly ..................................... 35
Cannot Install the Printer Driver ................................... 34
Canon IJ Status Monitor (Windows) .............................. 40
CANON U.S.A., INC. LIMITED WARRANTY --- (USA Only).. 51
CLI-8BK Black............................................................... 31
CLI-8C Cyan.................................................................. 31
CLI-8M Magenta........................................................... 31
CLI-8PC PhotoCyan....................................................... 31
CLI-8PM PhotoMagenta................................................ 31
CLI-8Y Yellow ............................................................... 31
cover guide .................................................................... 8
P
Page Setup (Macintosh) ......................................... 25, 40
Page Setup dialog box (Macintosh) .............................. 40
Paper Does Not Feed Properly ...................................... 41
Paper Feed Roller ......................................................... 41
Paper Jams................................................................... 41
Paper Size.................................................................... 25
Paper Support Load Limit ............................................. 19
Photo Paper Plus Double Sided .................................... 19
Photo Paper Plus Glossy .............................................. 19
Photo Paper Plus Semi-Gloss ....................................... 19
Photo Paper Pro ........................................................... 19
Photo Stickers.............................................................. 20
PhotoRecord ................................................................ 30
POWER button................................................................ 2
POWER lamp .................................................................. 2
POWER Lamp and ALARM Lamp Flash Alternately ......... 43
Print dialog box...................................................... 21, 25
Print Head Cleaning ..................................................... 32
Print Head Deep Cleaning............................................. 32
Print Media to Avoid....................................................... 4
Print Quality................................................................. 36
Print Results Not Satisfactory or Contains Errors .......... 36
Printer Driver Setting for Media Type............................ 19
Printer Properties dialog box.................................. 21, 29
Printing the Nozzle Check Pattern ................................ 32
Printing with Macintosh ............................................... 24
Printing with Windows ................................................. 20
D
Driver
settings................................................................ 22
uninstalling.......................................................... 42
E
Easy-PhotoPrint ........................................................... 30
Easy-WebPrint.............................................................. 30
ExifPrint ....................................................................... 30
F
Feed switch button......................................................... 5
Fine Art Paper “Photo Rag” .......................................... 19
G
Glossy Photo Paper...................................................... 19
H
R
Help button.................................................................... 2
High Resolution Paper.................................................. 19
Regulatory Information ................................................ 50
Replacing an Ink Tank .................................................. 31
L
S
Load Limit Mark ........................................................8, 13
Loading Paper................................................................ 4
Loading Plane Paper in the Auto Sheet Feeder................ 7
Safety Precautions ....................................................... 48
Specifications .............................................................. 44
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Stop/Reset button........................................................ 23
Super White Paper........................................................ 19
T
Troubleshooting........................................................... 33
Troubleshooting Printer Hardware ................................ 39
T-Shirt Transfers........................................................... 20
Turning off the Printer .................................................... 3
Turning on the Printer..................................................... 2
U
Uninstalling the printer driver ...................................... 42
Using Specialty Media.................................................. 18
Using the Auto Sheet Feeder and the Cassette................ 5
Using the Bundled Software ......................................... 30
W
Warranty ...................................................................... 51
When Printing Becomes Faint or Colors are Incorrect .... 32
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Information
For additional supplies, use the following descriptions and order numbers.
Description
Ink Tanks
Order #
CLI-8 BK
CLI-8 C
0620B002
0621B002
0622B002
0623B002
0624B002
0625B002
CLI-8 M
CLI-8 Y
CLI-8 PC
CLI-8 PM
Canon Specialty Papers
Photo Paper Plus Glossy (4" x 6"/20 sheets)
Photo Paper Plus Glossy (4" x 6"/50 sheets)
Photo Paper Plus Glossy (4" x 6"/120 sheets)
Photo Paper Plus Glossy (5" x 7"/20 sheets)
Photo Paper Plus Glossy (8.5" x 11"/20 sheets)
Photo Paper Plus Double Sided (5" x 7"/10 sheets)
Photo Paper Plus Double Sided (8.5" x 11"/10 sheets)
Photo Paper Plus Double Sided Album Kit (5" x 7")
Photo Paper Plus Double Sided Album Kit (8.5" x 11")
Photo Paper Plus Semi-Gloss (4" x 6"/50 sheets)
Photo Paper Plus Semi-Gloss (8.5" x 11"/20 sheets)
Photo Paper Pro for Borderless Printing (4" x 6"/20 sheets)
Photo Paper Pro for Borderless Printing (4" x 6"/75 sheets)
Photo Paper Pro (8.5" x 11"/15 sheets)
7980A007
7980A012
7980A022
7980A019
7980A006
9981A006
9981A005
0041B005
0041B006
8386A010
8386A007
1029A014
1029A027
1029A004
1029A059
1029A028
7981A014
7981A004
0755B021
0775B022
0775B023
0775B024
9157A023
0001C001
1043A011
Photo Paper Pro (8" x 10"/20 sheets)
Photo Paper Pro (8.5" x 11"/30 sheets)
Matte Photo Paper (4" x 6"/120 sheets)
Matte Photo Paper (8.5" x 11"/50 sheets)
Photo Paper Glossy (4" x 6"/50 sheets)
Photo Paper Glossy (4" x 6"/100 sheets)
Photo Paper Glossy (8.5" x 11"/50 sheets)
Photo Paper Glossy (8.5" x 11"/100 sheets)
Glossy Photo Paper Credit Card Size
Photo Stickers
High Resolution Paper (8.5" x 11"/100 sheets)
Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon eStore at
© 2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a
registered trademark or trademarks in other countries. All other product and brand names are trademarks of their
respective owners. As an ENERGY STAR® partner, Canon U.S.A., Inc. has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Canon Inc.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Canada, Inc.
6390 Dixie Road, Mississauga, Ontario, L5T 1P7, Canada
Canon Latin America, Inc.
703 Waterford Way, Suite 400, Miami, FL 33126, U.S.A.
Canon Mexicana
Boulevard Manuel Avila Camacho No. 138 PB
y Pisos 15, 16 y 17, Colonia Lomas de Chapultepec
Delegación Miguel Hidalgo, CP 11000, Mexico D.F.
The following ink tanks are compatible with this printer.
For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide.
QT5-0385-V01
XXXXXXXX
©CANON INC.2006
PRINTED IN THAILAND
Download from Www.Somanuals.com. All Manuals Search And Download.
|