Beko Washer WMB 91242DLSC User Manual

WMB 91242 DLSC  
Washing Machine  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Auxiliary functions . . . . . . . . . . . . . . . . 19  
Time display . . . . . . . . . . . . . . . . . . . . 19  
Starting the Program . . . . . . . . . . . . . . 20  
Progress of program . . . . . . . . . . . . . . 20  
Changing the selections after the program  
has started . . . . . . . . . . . . . . . . . . . . . 21  
Switching the machine to standby mode21  
Child-proof lock. . . . . . . . . . . . . . . . . . 21  
Ending the program through canceling 21  
Program in rinse hold mode. . . . . . . . . 22  
End of program . . . . . . . . . . . . . . . . . . 22  
1 Your Washing Machine  
4
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4  
Specifications . . . . . . . . . . . . . . . . . . . . 5  
2 Warnings  
6
General Safety. . . . . . . . . . . . . . . . . . . . 6  
First Use . . . . . . . . . . . . . . . . . . . . . . . . 6  
Intended use . . . . . . . . . . . . . . . . . . . . . 6  
Safety instructions . . . . . . . . . . . . . . . . . 7  
If there are children in your house... . . . . 7  
3 Installation  
8
6 Quick instructions for daily  
use  
23  
24  
Removing packaging reinforcement. . . . 8  
Opening the transportation locks. . . . . . 8  
Appropriate installation location . . . . . . . 8  
Adjusting the feet. . . . . . . . . . . . . . . . . . 8  
Connecting to the water supply. . . . . . . 8  
Connecting to the drain . . . . . . . . . . . . . 9  
Electrical connection . . . . . . . . . . . . . . 10  
Destroying the packaging material. . . . 10  
Disposing of the old machine. . . . . . . . 10  
7 Cleaning and care  
Detergent drawer. . . . . . . . . . . . . . . . . 24  
The door and the drum . . . . . . . . . . . . 24  
Outer cabinet and control panel. . . . . . 24  
Inlet water filters. . . . . . . . . . . . . . . . . . 24  
Draining any remaining water and cleaning  
the pump filter . . . . . . . . . . . . . . . . . . . 25  
4 Initial preparations for  
washing  
8 Solution suggestions for  
problems  
11  
27  
Sorting the laundry . . . . . . . . . . . . . . . 11  
Preparing clothes for washing . . . . . . . 11  
Correct load capacity . . . . . . . . . . . . . 11  
Loading door. . . . . . . . . . . . . . . . . . . . 12  
Detergents and softeners . . . . . . . . . . 12  
5 Selecting a Program and  
Operating Your Machine  
14  
Control panel. . . . . . . . . . . . . . . . . . . . 14  
Display symbols. . . . . . . . . . . . . . . . . . 15  
Turning the machine on . . . . . . . . . . . . 15  
Program selection . . . . . . . . . . . . . . . . 15  
Additional programs . . . . . . . . . . . . . . 15  
Special programs . . . . . . . . . . . . . . . . 17  
Temperature selection . . . . . . . . . . . . . 17  
Spin Speed selection. . . . . . . . . . . . . . 17  
Program and consumption table . . . . . 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Your Washing Machine  
Overview  
3
4
1
2
5
6
1 - Detergent Drawer  
2 - Door  
4 - Control Panel  
5 - Filter Cap  
3 - Top Lid  
6 - Height-adjustable feet  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Specifications  
Models  
WMB 91242 DLSC  
Maximum dry laundry capacity (kg)  
Height (cm)  
9
84  
Width (cm)  
60  
Depth (cm)  
59  
73  
220-240 V / 50Hz  
10  
Net Weight (±4 kg)  
Electricity (V/Hz.)  
Total Current (A)  
Total Power (W)  
Spinning cycle (rpm max.)  
2000-2350  
1200  
Specifications of this appliance may change without notice to improve the quality of the  
product. Figures in this manual are schematic and may not match your product exactly.  
Values stated on the machine labels or in the documentation accompanying it are  
obtained in laboratory in accordance with the relevant standards. Depending on  
operational and environmental conditions of the appliance, values may vary.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
2
Warnings  
Please read the following information.  
Otherwise, there may be the risk of  
personal injury or material damage.  
Moreover, any warranty and reliability  
commitment will become void.  
First Use  
To prepare your machine for washing,  
carry out your first washing process  
without loading your machine and  
with detergent under “Cottons 90°C”  
program.  
Ensure that the cold and hot water  
connections has been made correctly  
when installing your machine.  
General Safety  
Never place your machine on a carpet  
covered floor. Otherwise, lack of  
airflow from below of your machine  
may cause electrical parts to overheat.  
This may cause problems with your  
washing machine.  
Otherwise, your laundry may come  
out hot at the end of the washing  
process and may wear out.  
If the power cable or mains plug is  
damaged you must call Authorized  
Service for repair.  
If the current fuse or circuit breaker is  
less than 16 Amperes, please have  
a qualified electrician install a 16  
Ampere fuse or circuit breaker.  
While using with or without a  
Check water hoses for wear. Do not  
use old/used water inlet hoses. These  
may cause stains on your laundry.  
Fit the drain hose into the discharge  
housing securely to prevent any  
water leakage and to allow machine  
to take in and discharge water as  
required. It is very important that the  
water intake and drain hoses are not  
folded, squeezed, or broken when the  
appliance is pushed into place after it  
is installed or cleaned.  
Your washing machine is designed to  
continue operating in the event of a  
power interruption. You cannot cancel  
any program by pressing the “On/Off  
button.” Your machine will not resume  
its program when the power restores.  
Press the “Start/Pause/Cancel” button  
for 3 seconds to cancel the program  
(See, Cancelling a Program)  
There may be some water in your  
machine when you receive it. This is  
from the quality control process and  
is normal. It is not harmful to your  
machine.  
Some problems you may encounter  
may be caused by the software. Press  
“Start/Pause/Cancel” button for 3  
seconds to cancel the program set  
in your machine before calling the  
authorized service.  
transformer, do not neglect to have  
the grounding installation laid by a  
qualified electrician. Our company  
shall not be liable for any damages  
that may arise when the machine is  
used on a line without grounding.  
To make your machine ready for use,  
please be sure that the tap water  
supply and water drainage systems  
are appropriate before calling the  
authorized service. If they are not,  
call a qualified plumber to have any  
necessary arrangements carried out.  
Intended use  
This product has been designed for  
home use.  
The appliance may only be used for  
washing and rinsing of textiles that are  
marked accordingly.  
Only detergents, softeners and  
supplements suitable for washing  
machines may be used.  
Observe the care instructions labelled  
on textile products and any other  
instructions given by companies that  
produce detergents for your machine.  
This appliance is not intended for use  
by persons (including children) with  
reduced physical, sensory or mental  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
capabilities, or lack of experience  
and knowledge, unless they have  
been given supervision or instruction  
concerning use of the appliance by a  
person responsible for their safety.  
If there are children in your  
house...  
Electrical appliances may be  
dangerous for the children. Keep  
children away from the machine when  
it is operating. Do not let them tamper  
with the machine.  
Safety instructions  
This appliance must be connected to  
an earthed outlet protected by a fuse  
of suitable capacity.  
Close the door when you leave the  
area where the machine is located.  
Store all detergents in a safe place out  
of reach of the children.  
The supply and draining hoses must  
always be securely fastened and  
remain in an undamaged state.  
Fit the draining hose to a washbasin  
or bathtub securely before starting up  
your machine. There may be a risk of  
being scalded due to high washing  
temperatures!  
Never open the door or remove the  
filter while there is still water in the  
drum. Otherwise, there may be the  
risk of flooding and possible injury due  
to the hot water.  
Never force open the locked door!  
The door will be ready to open just a  
few minutes after the washing cycle  
comes to an end.  
Unplug the machine when it is not in  
use.  
Never wash down the appliance with a  
water hose! There is the risk of electric  
shock! Always disconnect from the  
mains by unplugging before cleaning.  
Never touch the plug with wet hands.  
Never unplug by pulling on the cable,  
always pull out from the plug only. Do  
not operate the machine if the power  
cord or plug is damaged.  
Never attempt to repair the machine  
yourself. Otherwise, you may be  
putting yours and others lives in  
danger.  
For malfunctions that cannot be  
solved by information in the operating  
manual:  
Turn off the machine, unplug it, turn  
off the water tap and contact an  
authorized service agent.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
3
Installation  
washing machine needs to be moved  
again in the future.  
Never move the appliance without the  
transportation safety bolts properly  
fixed in place!  
Removing packaging  
reinforcement  
C
Tilt the machine to remove the packaging  
reinforcement. Remove the packaging  
reinforcement by pulling the ribbon.  
Appropriate installation location  
Install the appliance in environments which  
have no risk of freezing, in a stable and  
level position.  
The floor must be capable of carrying  
the load on it!  
C
If the washing machine and a drier  
are placed on top of each other, their  
approximate weight together may  
reach 180 kg when they are full.  
C
Important:  
Do not place the appliance on top of  
the power cable.  
Keep at least 1cm distance from the  
edges of other furniture.  
Place the machine on a firm surface;  
do not position it on a long pile rug or  
such like surfaces.  
Opening the transportation  
locks  
Transportation safety bolts must be  
removed before operating the washing  
machine! Otherwise, the machine will  
be damaged!  
C
Adjusting the feet  
Do not use any tools to loosen the  
1. Loosen all the bolts with a spanner  
C
lock nuts. Otherwise, they can be  
damaged.  
until they rotate freely (“C”)  
1. Manually (by hand) loosen the lock  
nuts on the feet.  
2. Adjust them until the machine stands  
level and firm.  
3. Important: Tighten all lock nuts up  
again.  
2. Remove transportation safety bolts by  
turning them gently.  
3. Fit the covers (supplied in the bag with  
the Operation Manual) into the holes  
on the rear panel. (“P”)  
Connecting to the water supply.  
Important:  
The water supply pressure required  
to run the machine must be 1-10 bar  
(0,1 – 1,0 MPa). Attach a pressure-  
reducing valve if the water pressure is  
Keep the transportation safety bolts  
C
in a safe place to reuse when the  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
higher.  
Models with a single water inlet should  
not be connected to the hot water  
tap. Laundry may be damaged or the  
appliance may switch to protection  
mode and not work.  
Connect the special hoses supplied  
with the machine to the water intake  
valves on the machine. The hose  
bearing the “red” sign (90°C max)  
is the hot water inlet and the hose  
bearing the “blue” sign (25°C max) is  
for the cold water inlet.  
When returning the appliance to its place  
after maintenance or cleaning, care should  
be taken not to fold, squeeze or block the  
hoses.  
Connecting to the drain  
The water discharge hose can be  
attached to the edge of a washbasin or  
bathtub. The drain hose should be firmly  
fitted into the drain as to not loosen in its  
housing.  
Important:  
The end of the drain hose can be  
directly connected to the wastewater  
drain or to the washbasin. The  
fitting must be secured in all types  
of connections. Your house may be  
flooded if the hose falls out of its  
housing during water discharging.  
The hose should be attached to a  
height of at least 40 cm, and 100 cm  
at most.  
If you are going to use your double  
water-inlet machine as a single (cold)  
water-inlet unit, you must install the  
stopper*, supplied with your machine  
to the hot water valve.  
If you want to use both water inlets of  
the product, you can connect the hot  
water hose after removing the stopper  
and gasket group from the hot water  
valve.  
* Applies for the products supplied  
with a blind stopper group.  
Open the taps completely after  
making the hose connection to check  
if there is any water leakage at the  
connection points. Turn off the tap  
and remove the nut in case of any  
leakage. Retighten the nut carefully  
after checking the seal. To prevent any  
water leakage and any other damage  
to be caused by it, keep the taps  
closed when the machine is not in  
use.  
In case the hose is elevated after  
laying it on the floor level or close to  
the ground (less than 40 cm above the  
ground), water discharge becomes  
more difficult and the laundry may  
come out wet. Therefore, the heights  
described in the figure should be  
followed.  
To prevent dirty water refilling the  
machine, and to allow for easy  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
discharge, the end of the hose must  
not be submerged in the drain water.  
The end of the hose must be able  
to take in air. The hose should be  
pushed into the drainage for more  
than 15 cm. If it is too long you may  
have it shortened.  
The end of the hose should not be  
bent, it should not be stepped on and  
it must not be folded between the  
drain and the machine.  
The length of the hose is too short,  
you may add an extension hose to the  
original section. The length of the hose  
must not be longer than 3.2 m after  
coming out of the machine. To avoid  
water leakage failures, the connection  
between the extension hose and the  
drain hose of the product must be  
fitted well with an appropriate clamp  
as not to come off and leak.  
domestic waste.  
Packaging materials of your machine are  
manufactured from recyclable materials.  
Disposing of the old machine  
Dispose of your old appliance in an  
environmental friendly manner.  
You may refer to your local agent or  
solid waste collection center in your  
municipality to learn how to dispose of  
your machine.  
Before disposing of your old washing  
machine, cut off the mains plug and make  
the door lock unusable.  
Electrical connection  
Connect the machine to an earthed outlet  
protected by a fuse of suitable capacity.  
Important:  
Connection should comply with  
national regulations.  
Power cord plug must be within easy  
reach after installation.  
The voltage and the allowed fuse  
protection are specified in the section  
Technical Specifications”.  
The specified voltage must be equal  
to your mains voltage.  
Connection via extension cords or  
multi-plugs should not be made.  
A damaged power cable must be  
replaced by a qualified electrician.  
The appliance must not be operated  
unless it is repaired! There is the risk  
of electric shock!  
B
B
Destroying the packaging  
material  
Packaging material can be dangerous to  
children. Keep the packaging materials out  
of reach of children or dispose them by  
classifying according to waste directives.  
Do not dispose them together with normal  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Initial preparations for washing  
Empty pockets and remove all foreign  
Sorting the laundry  
objects such as coins, pens and  
paper clips. If possible, turn pockets  
out and brush.  
Sort the laundry according to type of  
fabric, colour, and degree of soiling  
and permissible water temperature.  
Always follow the advice on the  
garment labels.  
Place small items like infants’ socks  
and nylon stockings, etc. in a laundry  
bag, pillow case or something similar.  
This will also save your laundry from  
getting lost.  
Place curtains in the machine with  
care. Remove curtain rails and pullers.  
Fasten zippers, sew loose buttons  
and mend rips and tears.  
Wash “machine washable” or “hand  
washable” labelled products only with  
an appropriate Programme.  
Do not wash colours and whites  
together. New, dark coloured cottons  
may release a lot of dye. Wash them  
separately.  
Non machine  
washable  
Washing water  
Wash with  
Do not wash  
temperature sensitive, short  
programmes.  
Bleach can be Do not use  
Dry-cleanable  
Do not  
dry-clean  
used  
bleach  
Tough stains must be treated properly  
before washing. If you are not sure,  
check with a dry cleaner.  
Use only dyes/colour changers and  
lime removers suitable for machine  
wash. Always follow the instructions  
on the packaging.  
Suitable for  
drier  
Do not dry  
with drier  
Dry  
horizontally  
Dry on a  
hanger  
Wash trousers and delicate clothes  
turned inside out.  
Keep laundry items made of Angora  
wool in the freezer for a few hours  
before washing. This will reduce  
pilling.  
Hang without Can be ironed  
Can be  
Do not iron  
spinning  
with hot iron ironed with  
warm iron  
Preparing clothes for washing  
Laundry items with metal attachments  
such as, bras, belt buckles and metal  
buttons will damage the machine. Remove  
metal attachments or place the items in  
a clothing bag, pillow case, or something  
similar.  
Correct load capacity  
The maximum load capacity depends  
on the type of laundry, the degree of  
soiling and the washing Programme  
you wish to use.  
The machine adjusts the amount of  
water according to the amount of  
laundry placed inside.  
Please follow the information in  
the "Programme Selection Table".  
Washing results will degrade when the  
machine is overloaded.  
C
C
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Following weights are given as examples.  
Detergent, softener and other  
cleaning agents  
Add detergent and softener before starting  
the washing Programme.  
Never open the detergent dispenser  
drawer while the washing Programme is  
running!  
When using a Programme without pre-  
wash, no detergent should be put into the  
pre-wash compartment (Compartment  
no. I).  
Laundry type  
Bathrobe  
Napkin  
Weight (gr.)  
1200  
100  
Duvet cover  
Bed Sheet  
Pillowcase  
Tablecloth  
Towel  
700  
500  
200  
250  
200  
A Programme without pre-wash should be  
selected if a detergent bag or a dispensing  
ball is going to be used. You can place  
the detergent bag or the dispensing  
ball directly among the laundry in your  
machine.  
Evening gown  
Underclothing  
Mens overalls  
Mens shirt  
Mens pyjamas  
Blouse  
200  
100  
600  
200  
500  
100  
Choosing the detergent type  
The type of detergent to be used depends  
on the type and colour of fabric.  
Loading door  
The door is locked during Programme  
operation. The door can be opened after  
some time following the Programme end.  
Use different detergents for coloured  
and white clothes.  
Wash woollen with a special detergent  
specifically for woollens.  
Use only detergents manufactured  
specifically for automatic washing  
machines.  
Open the door.  
Place laundry items loosely in the  
machine.  
Push the door until it clicks into place  
tightly. Ensure that no items are  
caught in the door.  
Detergent quantity  
The amount of washing detergent to be  
used depends on the amount of laundry,  
the degree of soiling and water hardness.  
Detergents and softeners  
Detergent drawer  
The detergent drawer is composed of  
three compartments:  
Do not use amounts exceeding  
the quantities recommended on  
the package to avoid problems of  
excessive foam, poor rinsing, financial  
savings and finally, environmental  
protection.  
The detergent dispenser may be in two  
different types according to the model of  
your machine.  
- (I) for prewash  
- (II) for main wash  
- (III) siphon  
Use small amounts of detergent at a  
suitable measure for small amounts  
of laundry or for only slightly soiled  
laundry.  
Use exact measures for highly  
concentrated detergents.  
– ( ) for softener  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
quantity  
for prewashing  
for main washing  
1/2 measure  
1 measure  
an additional 1/2  
measure  
with hard water  
Softener  
Put the softener into the softener  
compartment of the detergent dispenser.  
Use the proportions recommended on  
the packet.  
Never exceed the (> max <) level  
marking; otherwise, the softener will  
be wasted without being used.  
If the softener has lost its fluidity, dilute  
dense softener with water before  
placing it in the detergent drawer.  
Liquid detergent  
When using liquid or gel washing  
detergents, please note the following:  
The liquid detergent may leave stains  
on your laundry if time delay feature is  
selected.  
Do not use liquid detergent if you want  
to wash using the time delay feature.  
Do not use liquid detergent for the  
main wash in a cycle with pre-wash.  
Use the detergent manufacturers  
measuring cup and follow the  
instructions on the package.  
Starch  
Add liquid starch, powder starch  
or the fabric dye into the softener  
compartment as instructed on the  
package.  
Never use fabric softener and starch  
together in the same washing cycle.  
Wipe the inside of the drum after using  
starch.  
Eliminating lime formation  
When required, use only appropriate  
lime removers developed specifically  
for washing machines and always  
follow the instructions on the package.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
5
Selecting a Program and Operating Your Machine  
Control panel  
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
-
-
-
-
-
-
-
-
Spin Speed Adjustment Button  
Display  
Temperature Adjustment Button  
Program Selection Knob  
On/Off Button  
Time Delaying Button (+/-)  
Auxiliary Function Buttons  
Start/Pause/Cancel Button  
Dark wash Dark wash Synthetics Cottons Pre-wash  
Main  
wash  
Rinse  
Wash  
Spin  
Delicates Pet hair  
removal  
Drain  
Anti-  
creasing  
Duvet  
Child-  
proof lock Wash  
Hand  
Baby  
Finished  
Jeans  
Cotton Woolens expres 14  
Daily  
Super short  
express  
Eco  
Temperature Self  
Daily  
express  
Rinse hold  
Start/ No spin  
Pause  
Quick  
wash  
Cold  
Lingerie  
Clean  
Mixed 40 Super 40 Extra rinse Freshen  
up  
Shirts  
Sport Time delay Intensive  
Fasion  
care  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display symbols  
washing, rinsing and, if required, spin  
cycles.  
a
b
c d e  
f
When selecting the program you are  
going to use, always consider type  
of fabric, color, degree of soiling and  
permissible water temperature.  
Always select the lowest required  
temperature. Higher temperature  
means higher power consumption.  
For further program details, see  
“Program Selection Table”  
A
m
g
A
C
h
i
F3  
F2  
F4  
F1  
l
k
j
• Cottons  
You can wash your durable clothes with  
this program. Your laundry will be washed  
with vigorous washing movements during  
a longer washing cycle. It is recommended  
for your cotton items (such as bed sheets,  
duvet and pillowcase sets, bathrobes,  
underclothing, etc.).  
a
- Spin Symbol  
- Spin Speed Indicator  
b
c – Water cut-off symbol (According to  
your machines model)  
d
e
f
g
h
i
- Economy Symbol  
- Temperature Indicator  
- Temperature Symbol  
- Door Locked Symbol  
- Standby Symbol  
• Synthetics  
You can wash your less durable clothes on  
this program. Gentler washing movements  
and a shorter washing cycle is used  
compared to the “Cottons” program. It is  
recommended for your synthetic clothes  
(such as shirts, blouses, synthetic/cotton  
blended garments, etc.). For curtains and  
lace, the “Synthetic 40” program with pre-  
wash and anti-creasing functions selected  
is recommended. Detergent should not  
be put in the pre-wash compartment.  
Less detergent should be put in the main  
wash compartment as loose knit fabrics  
(lace) foam too much due to its meshed  
structure.  
- Start Symbol  
j
k
- Auxiliary Function Symbols  
- Remaining Time and Delaying Time  
Indicator  
l
- Program Indicator Symbols (pre-  
wash/main wash/rinse/softener/spin)  
- Time Delaying Symbol  
m
Turning the machine on  
Plug in your machine. Turn the tap on  
completely. Check if the hoses are  
connected tightly. Place the laundry in  
the machine. Add detergent and softener.  
Press the “On/Off” button.  
Program selection  
• Woollens  
Select the appropriate program from the  
program table according to type, amount  
and degree of soiling of the laundry and  
washing temperatures.  
You can wash your machine-washable  
woolen garments on this program. Wash  
by selecting the proper temperature  
according to the labels of your clothes.  
It is recommended to use appropriate  
detergents for woolens.  
Turn the Programme Selection Knob to the  
program mode that you wish to wash your  
laundry.  
Additional programs  
For special cases, there are also extra  
programs available:  
The recommended temperature and spin  
speed for the selected program appear.  
Press “Start/Pause/Cancel” button to start  
the program.  
Additional programs may differ  
according to the model of your  
machine.  
C
Main programs  
Depending on the type of textile, the  
following main programs are available:  
Each of these main programs comprise  
of a complete washing process, including  
• Cotton Economic  
You may wash your laundry to be washed  
in cottons program in longer periods which  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
ensure very good washing performance.  
Cottons economy program consumes  
less energy compared to other  
cottons programs.  
C
• Babycare  
Increased hygiene is provided by a longer  
heating period and an additional rinse  
cycle. It is recommended for baby clothes  
and clothes worn by allergic people.  
• Hand wash  
You can wash your woolen/delicate  
clothes that bear “not machine-  
washable” labels for which hand wash is  
recommended on this program. It washes  
the laundry with very tender washing  
movements without damaging your  
clothes.  
Each of these main programs comprise  
of a complete washing process, including  
washing, rinsing and, if required, spin  
cycles.  
Sort the laundry according to type  
of fabric, color, degree of soiling and  
permissible water temperature while  
choosing a program.  
C
• Daily Express  
This program is used to wash lightly soiled  
and unstained cotton garments in a short  
time.  
Always select the lowest required  
temperature. Higher temperature  
means higher power consumption.  
For further program details, see  
“Program Selection Table”  
C
C
• Xpress Super Short  
You can use this program to quickly  
wash a small number of lightly soiled  
and unstained cotton garments. E.g.:  
bathrobes, duvet covers, sport wear, daily  
clothes and etc. used only once.  
• Freshen Up  
You can use “Refreshing” program to  
remove odors from laundry that are used  
only for once and do not have any spots or  
dirt on them.  
• Darkcare  
Use this programme to wash your dark  
coloured laundry, or the coloured laundry  
that you do not want them get faded. This  
programme washes your laundry with  
low mechanical movements and at low  
temperature. We recommend you to use  
liquid detergent or woolen shampoo for  
dark coloured laundry.  
• Eco clean 20  
You can use this program, which is more  
sensitive to environment and natural  
resources, to wash lightly soiled and  
unspotted cotton laundry (max 3.5 kg)  
in a short time and economical way. It is  
suggested to use liquid or gel washing  
detergents.  
• Mix  
You can use this program to wash cottons  
and synthetics together. There is no need  
to sort them.  
• Self Clean  
It is suggested to run this program with  
certain intervals (e.g. once in 1 or 2 months)  
for the self-cleaning of your machine. This  
program must certainly be run without any  
laundry in the machine. Make sure that  
the machine is empty before starting the  
program. For more effective cleaning, you  
can run the program by adding powder  
lime remover for washing machines into  
compartment II of the detergent drawer.  
After the program is completed, leave  
• Duvet  
You can also wash your machine-  
washable fiber duvets with this program.  
You must not load more than 1 piece  
of fiber duvet for two persons.  
C
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the door ajar to allow the inside of the  
machine get dry.  
40˚C  
30˚C  
Cold  
Blended clothes including synthetics  
and woolens as well as delicates.  
This is not a program for washing  
laundry. This is a maintenance  
program for the machine.  
C
Economy Symbol  
Shows energy saving programs and  
temperature selections.  
As “Intensive” and “Hygiene” programs are  
long programs with higher temperature  
selections to ensure hygiene, “Economy”  
Symbol will not light up.  
Never use this program if there is  
something in your machine.  
When this feature is started your  
machine senses the load inside of it  
automatically, if any, and interrupts the  
program.  
C
C
Special programs  
For specific applications, select any of the  
following programs:  
• Rinse  
This program is used when you want to  
rinse or starch separately.  
Spin Speed selection  
Whenever a new program is selected,  
the maximum spin speed of the selected  
program is displayed on the spin speed  
indicator.  
• Spin + Drain  
This program spins with maximum  
possible rpm in the default setting after the  
water drains from the machine.  
To decrease the spin speed, press the  
“Spin” button. Spin speed decreases  
gradually. Then, rinse hold and no spin  
options are shown respectively.  
Rinse hold is shown with “ ” and no  
spin is shown with “ ” symbols.  
Use a lower spin speed for delicate  
laundries.  
C
Temperature selection  
Whenever a new program is selected, the  
temperature anticipated for that program  
appears on the temperature indicator .  
To change the temperature, press  
the temperature button. Temperature  
decreases in 10° increments.  
Cold selection is shown with “-” symbol.  
If you are not going to unload your clothes  
immediately after the cycle, you may use  
rinse hold function in order to prevent your  
clothes become wrinkled when there is no  
water in the machine. With this function,  
your laundry is kept in the final rinsing  
water. If you want to spin your laundry  
after the rinse hold function:  
When the “Temperature” button is pressed  
after Cold is selected, the maximum  
temperature of the program you have  
selected will be displayed.  
To decrease the temperature, press the  
Temperature” button again.  
-
Adjust the spin speed.  
-
Press “Start/Pause/Cancel” button.  
Program resumes. Your machine  
drains the water and spins your  
laundry.  
Normally soiled, white cottons and  
90˚C linens. (Ex.: coffee table covers,  
tablecloths, towels, bed sheets)  
Normally soiled, fade proof colored  
linens, cottons or synthetic clothes  
60˚C (Ex.: shirts, nightgowns, pajamas)  
and lightly soiled white linen clothes  
(Ex.: underwear)  
You can use no spin function in order to  
drain the water without spinning at the end  
of the program.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Program and consumption table  
EN  
2
Auxiliary functions  
Selectable  
temperature range  
°C  
Programme (°C)  
Cottons  
Cottons  
Cottons  
Babycare  
Cotton Economic  
Cotton Economic  
Synthetics  
Synthetics  
Eco Clean  
Mix  
90  
60  
40  
90  
60**  
40  
9
9
9
9
9
9
4
4
87 2.7 1600  
85 1.8 1600  
*
90-Cold  
90-Cold  
90-Cold  
90-30  
60-Cold  
60-Cold  
60-Cold  
60-Cold  
20  
85  
1
1600  
80 2.7 1600  
66 1.35 1600  
80 0.95 1600  
60  
40  
55  
1
1000  
55 0.52 1000  
20 3.5 45 0.16 1600  
40  
40  
4
-
55 0.62 1000  
60 0.6 1000  
42 0.1 1400  
70 2.02 1400  
70 1.2 1400  
80 0.3 1400  
56 0.3 1000  
40-Cold  
60-40  
Duvet  
Xpress Super Short 30  
2
9
9
9
2
30-Cold  
90-Cold  
90-Cold  
90-Cold  
40-Cold  
30-Cold  
40-Cold  
70  
Daily Express  
Daily Express  
Daily Express  
Woollens  
Hand wash  
Darkcare  
90  
60  
30  
40  
30 1.5 40 0.25 1000  
40  
70  
-
4
-
95 0.6 1000  
110 800  
35 0.03 1000  
*
*
Self Clean  
2
Freshen Up  
2
-
• : Selectable  
* : Automatically selected, not cancellable.  
** : Energy Label programme (EN 60456)  
*** If maximum spin speed of your machine is lower, selection may be made until  
maximum spin speed.  
- : See program description for maximum load.  
The auxiliary functions in the table vary according to the model of your machine.  
Water and power consumption and program duration differ from the table subject to  
changes in water pressure, water hardness and temperature, ambient temperature,  
type and amount of laundry, selection of auxiliary functions, and changes in supply  
voltage.  
C
C
Program duration will be displayed on the screen of your machine according to your  
selection.  
C
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use this function for smaller amounts  
Auxiliary functions  
or slightly soiled laundries.  
Auxiliary Function Selection Buttons  
• Rinse Plus  
When this function (c) is selected, washing  
and rinsing is performed with plenty of  
water. F3” symbol lights up on the display.  
• Anti-Creasing  
With this function (d), drum movement  
will be lessened to prevent creasing and  
spinning speed is limited. In addition,  
washing is carried out at a higher water  
level. “F4” symbol lights up on the display.  
Use this function for delicate laundries  
that crease easily.  
a
b
c
d
Depending on the program, you can  
select the desired auxiliary function by  
pressing the buttons a, b, c,d.  
Select the required auxiliary functions  
before starting the program.  
Some combinations cannot be  
selected together. Ex.: Pre-wash and  
Quick Wash.  
Whenever you select this auxiliary  
function, load your machine with half of  
the maximum laundry specified in the  
program table.  
C
• Rinse Hold  
If you are not going to unload your clothes  
immediately after the program completes,  
you may use rinse hold function and keep  
your laundry in the final rinsing water in  
order to prevent them become wrinkled  
when there is no water in the machine.  
Press “Start/Pause” button after this  
process if you want to drain the water  
without spinning. Program resumes. Your  
machine drains the water and program  
completes.  
If you want to spin your laundry that you  
left in water:  
- Adjust the spin speed.  
- Press Start/Pause button  
Program resumes. Your machine drains  
the water, spins the laundry and program  
completes.  
Symbol of the selected auxiliary  
function will light up.  
Auxiliary function selection  
If an auxiliary function that should not  
be selected together with a previously  
selected function is chosen, the first  
selected function will be cancelled and the  
last auxiliary function selection will remain  
active.  
Ex.: If you want to select pre-wash first  
and then quick wash, pre-wash will be  
cancelled and quick wash will remain  
active.  
Auxiliary function that is not compatible  
with the program cannot be selected. (see,  
“Program Selection Table”)  
Time display  
The display shows the time remaining for  
the program to complete while a program  
is running. Time is displayed in hours and  
minutes as “01:30”.  
• Prewash  
When you select this function (a), the  
display will indicate “F1” symbol.  
A pre-wash is only worthwhile for  
heavily soiled laundry. Without  
pre-wash you save energy, water,  
detergent and time.  
Pre-wash without detergent is  
recommended for lace and curtains.  
• Quick Wash  
With this function (b), the wash time is  
shortened. “F2” symbol lights up on the  
display.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Time delay  
2. Start symbol will fade. The standby  
symbol and the time delaying symbol  
will flash.  
3. Press time delaying button “-” to  
decrease the desired time delay.  
Program duration after 30 minutes  
shall be displayed.  
With the “Time delay” function you can  
delay the program start up to 24 hours.  
Setting can be made in intervals of 30  
minutes.  
1. Open the loading door, place the  
laundry inside and fill detergent  
drawer.  
4. Press Start/Pause/Cancel Button to  
start the program.  
2. Set the washing program,  
temperature, spin speed and, if  
required, select the auxiliary functions.  
3. Press “Time delaying” buttons “+” and  
“-” to set your desired time delay. The  
Time delaying symbol will flash.  
4. Press “Start/Pause/Cancel” button.  
Then the time delay starts to count  
down. The Time delaying symbol will  
light up. The Start symbol will light up.  
The “:” in the middle of the displayed  
time delay will start to flash.  
Starting the Program  
1. Press Start/Pause/Cancel button to  
start the program.  
2. The start symbol which indicates that  
the program has started will light up.  
3. The door locks and the door locked  
symbol will light up.  
4. The Symbol of the relevant step  
(prewash, main wash, rinse, softener  
and spin) that the program has started  
from will light up.  
More laundry may be loaded or taken  
out during the time delay period. At  
the end of the time delay countdown  
process, time delaying symbol fades  
and the washing starts as the program  
duration is displayed.  
Progress of program  
The progress of a running program is  
shown through a number of symbols on  
the screen.  
At the beginning of each program  
Changing the delay time  
If you want to change the time during the  
countdown:  
step, the relevant symbol in the series  
of symbols will light up and thus, at  
the end of the program, all symbols  
will remain lit up. The symbol that  
lights up at the far right of the series  
of symbols indicates the step that is  
being carried out.  
1. Press “Start/Pause/Cancel” button.  
“ : “ in the middle of the screen will  
stop flashing. The Standby symbol will  
light up. The Time delaying symbol will  
flash. The Start Symbol will fade.  
2. Press “Time delaying” buttons “+” or  
“-” to set your desired time delay.  
3. Press “Start/Pause/Cancel” button.  
The Time delaying symbol will light  
up. The Standby symbol will fade. The  
Start symbol will light up.  
Pre-wash  
When “prewash” auxiliary function is  
selected, prewash symbol will light up to  
indicate the beginning of prewash step.  
Main wash  
Main wash symbol will light up to indicate  
that the main wash cycle has started.  
Rinse  
4. The “:” in the middle of the displayed  
time delay will start to flash.  
Rinse symbol lights up at the beginning of  
the rinse step.  
Canceling the time delay  
If you want to cancel the time delay  
countdown and start the program  
immediately:  
Softener  
Softener symbol lights up at the beginning  
of softener step.  
Spin  
Spin symbol will light up at the beginning  
of the final spin, during “Spin” and “Pump”  
1. Press “Start/Pause/Cancel” button.  
The “:” in the middle of the displayed  
time delay will stop flashing.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
special programs.  
Door lock  
If the machine is not spinning, the  
The Door Locked Symbol lights up when  
the loading door is locked. This symbol  
will flash until the door is allowed to open.  
Do not force the door at this stage. This  
symbol will fade out as soon as the door is  
allowed to open. You may open the door  
after the symbol fades out.  
program may be in rinse hold mode  
or the automatic spin correction  
system has been activated due to an  
excessive unbalanced distribution of  
laundry in the machine.  
Changing the selections after  
Child-proof lock  
the program has started  
The selected spin speed and program  
temperature fade out. An empty frame  
appears.  
When the “Program selection” button is  
brought to the appropriate position, rpm  
and temperature data reappear.  
Protect the appliance from being tampered  
by children by means of the child-proof  
lock. In this case, no change can be made  
in the running program.  
Your machine can be turned on and  
off with On/Off button while the child-  
proof lock is activated. In this case,  
your machine will resume its program  
with child-proof lock activated.  
C
Switching the machine to  
standby mode  
The machine is switched to child-lock by  
pressing the 2nd and 4th auxiliary functions  
for 3 sec. “C:on” (Child-proof lock is  
The machine is switched to standby  
mode by pressing “Start/Pause/Cancel”  
button momentarily. The Standby symbol  
which indicates the machine is in standby  
mode lights up and the start symbol that  
shows the program has started and is still  
continuing fades out.  
activated) label appears on the display.ꢀ  
The same symbol will also be displayed  
whenever any button is pressed while the  
machine is child-locked.  
F3  
F1  
To deactivate the child-proof lock, press  
the 2nd and 4th auxiliary function buttons  
for 3 sec.  
“C:OFF” (Child-proof lock is deactivated)  
label appears on the screen.  
Selecting or canceling an auxiliary  
function in pause mode  
Auxiliary functions can be cancelled or  
selected in accordance with the step the  
program is at.  
Adding/removing laundry in pause  
mode  
The door can be opened if the water  
level is suitable. The door locked symbol  
will light up until the door is suitable for  
opening. This symbol will fade out as soon  
as the door is allowed to open. Laundry  
may be added / taken out by opening the  
door.  
Ending the program through  
canceling  
“Start/Pause/Cancel” button is pressed  
for 3 seconds to cancel the program.  
Start symbol will flash during cancellation.  
After cancellation, the symbol of the  
corresponding step at which the  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
cancellation was made will remain lit and  
End” will appear on the screen.  
Program in rinse hold mode  
This process is shown with the  
flashing Spin Symbol and the lit up  
Standby Symbol.  
If you wish to spin when the machine is in  
this mode:  
Adjust the spin speed. Press “Start/Pause/  
Cancel” button. The program continues,  
pumps out the water and spins. The  
Standby Symbol fades out and Start  
Symbol lights up.  
If you want to discharge the water only  
without spinning:  
Press “Start/Pause/Cancel” button.  
The Standby symbol will fade. The  
Start symbol will light up. The program  
continues and only drains the water.  
End of program  
When the program is finished, the  
symbols of the relevant steps will remain  
lit up and the auxiliary function, spin and  
temperature data selected at the start-up  
of the program will remain selected. “End”  
will appear on the display.  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Quick instructions for daily use  
Preparation  
1. Press “Start/Pause/Cancel” button.  
1. Turn the tap on completely. Check that 2. Open the loading door and put in  
the hose is connected tightly.  
2. Place the laundry in the machine.  
3. Add detergent and softener.  
Starting  
more laundry.  
3. Close the loading door.  
4. Press “Start/Pause/Cancel” button.  
Programme is in rinse hold mode  
1. Press the “On/Off” button.  
2. Select the Programme and the  
temperature.  
This process is shown with the  
flashing spin symbol and the standby  
symbol which is lit up.  
C
3. If desired (according to your machines If you wish to spin when the machine is in  
model):  
this mode:  
1. Adjust the spin speed.  
2. Press “Start/Pause/Cancel” button.  
The Programme continues, pumps out  
the water and spins.  
select any auxiliary function,  
adjust the spin speed,  
set the time delay,  
4. Close the loading door.  
5. Press “Start/Pause/Cancel” button.  
The display shows the time remaining for  
the Programme to complete if time delay  
is not set.  
The display shows the time remaining for  
the Programme to start if the time delay is  
set.  
3. The standby symbol fades out and the  
start symbol lights up.  
If you want to discharge the water without  
spinning:  
1. Press “Start/Pause/Cancel” button.  
2. The standby symbol fades out and the  
start symbol lights up.  
6. Check if the Door Locked Symbol  
lights up on the screen.  
The Door Locked Symbol will light up if  
time delay is not set.  
The Door Locked Symbol will fade if time  
delay is set.  
Cancelling a Programme  
3. The Programme continues and only  
pumps out the water.  
Re-spinning the laundry  
The control system for an unbalanced load  
can pause the spinning in cases when the  
distribution of the laundry in the drum is  
not balanced.  
1. Press and hold the “Start/Pause/  
Cancel” button for about 3 seconds;  
the Start symbol will start flashing.  
2. The machine can discharge all the  
water or can take in water for 3 times  
at most to cool down the clothes and  
complete discharging process.  
Adding more laundry  
If you want to re-spin the clothes:  
1. Distribute the laundry in your machine  
for a balanced load.  
2. Select the spin Programme.  
3. Adjust the spin speed.  
After the Programme is finished  
Programme indicator symbols on the  
screen will remain lit after the Programme  
is finished. “End” will appear on the  
screen.  
1. Open the loading door and take out  
the laundry when the door locked  
symbol on the display fades out.  
2. Press the “On/Off” button.  
3. Turn the water tap off.  
This is only possible under the  
following conditions:  
C
during time delay,  
You may add or remove laundry during  
the time delay (until the Programme  
starts). At the beginning of a washing  
cycle (machine allows adding more  
laundry during a future step only if the  
water level is low enough to open the  
loading door or if the temperature in  
the machine is low).  
4. Remove any folds in the rubber seal  
on the loading door and check for  
debris.  
5. Leave the loading door and detergent  
drawer open to dry.  
In order to add laundry after the start-  
up of the Programme:  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
7
Cleaning and care  
Clean the drum with a stainless steel  
cleaning agent. Never use steel wool  
or wire wool.  
Detergent drawer  
Remove any powder residue buildup in  
the drawer. To do this;  
1. Press the dotted point on the siphon  
in the softener compartment and pull  
towards you until the compartment is  
removed from the machine.  
Outer cabinet and control panel  
When necessary:  
Wipe the exterior panels of your  
machine with soapy water or mild  
detergent. Dry it with a soft cloth.  
Use only a soft and damp cloth to  
clean the control panel.  
Never use a sponge or scrubbing  
material. These will damage the  
painted and plastic parts.  
C
Inlet water filters  
If more than a normal amount of water  
and softener mixture starts to gather  
in the softener compartment, the  
siphon must be cleaned.  
C
There is a filter at the end of each water  
intake valve at the back side of the  
machine and also at the end of each water  
intake hose where they are connected to  
the tap. These filters prevent the foreign  
substances and dirt in the water to enter  
into the machine. Filters should be cleaned  
as they get dirty.  
2. Wash the dispenser drawer and the  
siphon with plenty of lukewarm water  
in a washbasin. Wear protective  
gloves or use an appropriate brush  
to avoid touching the residues in the  
drawer when cleaning.  
3. Replace the drawer into its housing  
after cleaning. Check if the siphon is  
in its original location.  
The door and the drum  
After each wash:  
Check if there are any foreign  
substances in the drum.  
Open the hole in the bellow with the  
aid of a toothpick if it is clogged.  
Close the taps.  
Remove the nuts of the water intake  
hoses to clean the surfaces of the  
filters on the water intake valves with  
an appropriate brush.  
If the filters are very dirty, you can pull  
them out by means of pliers and clean  
them.  
Take out the filters on the flat ends of  
the water intake hoses together with  
the gaskets and clean thoroughly  
Foreign metal substances in your  
machine can cause rust stains. In  
such cases:  
C
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
under streaming water.  
Replace the gaskets and filters  
carefully and tighten the hose nuts by  
hand.  
You can remove the filter cover  
by slightly pushing the kick plate  
downwards with a screwdriver,  
through the gap above the filter cover.  
C
Draining any remaining water  
and cleaning the pump filter  
Filter system in your machine prevents  
solid items such as buttons, coins and  
fabric fibers clogging the pump propeller  
during discharging of the washing water.  
Thus, a good water discharge is achieved  
and the pump life is extended.  
3- An emergency drain hose is supplied  
with some of our models. Others are not  
supplied with this item.  
If your machine fails to drain the water,  
the pump filter may be clogged. You  
may have to clean it every 2 years or  
whenever it is blocked plugged. Water  
must be drained off to clean the pump  
filter.  
If your product is supplied with an  
emergency drain hose, do the following as  
shown in the figure below:  
In addition, water may have to be drained  
off completely in the following cases:  
before transporting the machine (e.g.  
when moving house)  
when there is the danger of frost  
In order to clean the dirty filter and  
discharge the water;  
1- Disconnect or unplug the machine from  
the power supply.  
There may be water at 90°C in the  
machine. Therefore, the filter must be  
cleaned only after the inside water  
is cooled down to avoid hazard of  
scalding.  
A
Pull out the pump outlet hose from its  
housing.  
Place a large container at the end of  
the hose. Drain the water off into the  
container by pulling out the plug at  
the end of the hose. If the amount of  
water to be drained off is greater than  
the volume of the container, replace  
the plug, pour the water out, then  
resume the draining process.  
After draining process is completed,  
replace the plug into the end of the  
hose and fit the hose back into its  
place.  
2- Open the filter cap. The filter cap  
may be composed of one or two pieces  
according to the model of your machine.  
If it is composed of two pieces, press the  
tab on the filter cap downwards and pull  
the piece out towards yourself.  
If your product is not supplied with an  
emergency drain hose, do the following as  
shown in the figure below:  
If it is composed of one piece, hold it from  
both sides and open it by pulling out.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Place a large container in front of the  
filter to receive water flowing from the  
filter.  
Loosen pump filter (anticlockwise) until  
water starts to flow out of it. Direct the  
flowing water into the container you  
have placed in front of the filter. You  
can use a piece of cloth to absorb any  
spilled water.  
When there is no water left, turn the  
pump filter until it is completely loose  
and remove it.  
Clean any residues inside the filter  
as well as fibers, if any, around the  
propeller region.  
If your product has a water jet feature,  
be sure to fit the filter into its housing  
in the pump. Never force the filter  
while replacing it into its housing.  
Fit the filter fully into its housing;  
otherwise, water may leak from the  
filter cap.  
4- Close the filter cap.  
Close the two-piece filter cap of your  
product by pushing the tab on it.  
Close the one-piece filter cap of your  
product by fitting the tabs on the bottom  
into their positions and pushing the upper  
part of it.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
8
Solution suggestions for problems  
Cause  
Explanation / Suggestion  
Programme cannot be started or selected.  
Machine may have switched to self  
protection mode due to an infrastructure  
problem (such as line voltage, water  
pressure, etc.).  
Bring your machine to factory settings by turning  
the Programme selection knob. (see, Ending the  
Programme through Cancelling)  
Water in the machine.  
There may be some water in your machine  
when you receive it. This is from the quality  
control process and is normal.  
It is not harmful to your machine.  
There is water coming from the bottom of the machine.  
- Make sure that the seals of the water inlet hoses  
are securely fitted.  
There might be problems with hoses or the  
pump filter.  
- Tightly attach the drain hose to the tap.  
- Make sure that the pump filter is completely  
closed.  
Machine does not fill with water  
- Tap may be turned off.  
- Open the inlet water taps fully.  
- Flatten the water intake hose.  
- Clean the water intake filter.  
- Close the loading door.  
- Water inlet hose might be bent.  
- Water inlet filter might be clogged.  
- The loading door may be ajar.  
Machine does not discharge water.  
- Water outlet hose might be clogged or  
twisted.  
- Pump filter may be clogged.  
- Clean or flatten the hose.  
- Clean the pump filter.  
Machine vibrates or shakes.  
- Machine feet might not be adjusted.  
- Transportation safety bolts might have not  
been removed.  
- Adjust the machine feet.  
- Remove the transportation safety bolts.  
- Add more laundry to the machine.  
- Reduce the amount of laundry in the machine or  
balance the load by hand.  
- There may be a small amount of laundry in  
the machine.  
- The machine may be overloaded or the  
clothes may be distributed unevenly.  
- There machine might be touching a solid  
surface.  
- Ensure that nothing touches the machine.  
Machine stops shortly after the Programme starts.  
Machine can stop temporarily due to low  
voltage.  
It will resume operating when the voltage is back to  
the normal level.  
The water being taken in is directly discharged.  
Connect the water draining hose as described in  
the operation manual.  
Improper position of the drain hose.  
No water can be seen in the machine during washing.  
This is not a problem. The water level is not  
visible from the outside of the machine.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
The door is jammed.  
- Water level might be above the lower level  
of the door.  
- Machine might be heating up the water or - Run either the “Pump” or “Spin” Programme.  
it may be at the spinning cycle.  
- Wait until the process is over.  
- Wait until the process is over.  
- Due to an electrical mechanism, the door  
can only be opened a few minutes after the  
Programme has stopped.  
Machine fills with water when a process is cancelled.  
For safety reasons cold water is added to cool the  
hot wash load  
Inside of machine may be hot.  
It continuously spins. Remaining time does not count down. (On models with display)  
- The automatic spin correction system might have  
been activated due to the unbalanced distribution  
of the laundry in the drum.  
- The laundry in the drum may be clustered  
There may be an imbalance of laundry in the  
(bundled laundry in a bag). Laundry should be  
machine.  
rearranged and re-spun.  
- No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent any  
damage to the machine and to its environment.  
Washing time takes longer than the time specified in the manual  
- The machine will wait until there is sufficient  
amount of water, which will lengthen the washing  
time to avoid poor washing results due to  
insufficient water.  
- Washing time is extended to avoid poor washing  
results when the supply voltage is low.  
- Cycle time is extended to heat up the water when  
- Water pressure may be low.  
the input water is cold. Also, washing time can be  
- Supply voltage may be low.  
lengthened to avoid poor washing results.  
- Input temperature of water may be low.  
- The automatic spin correction system might have  
- There may be an imbalance of laundry in  
been activated due to the unbalanced distribution  
the machine.  
of the laundry in the drum.  
- Number of rinses and/or amount of rinse  
- The laundry in the drum may be clustered  
water might have increased.  
(bundled laundry in a bag).  
- Laundry should be rearranged and re-spun.  
- No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent any  
damage to the machine and to its environment.  
- Water amount is increased to obtain a better  
rinse and a rinse cycle is added when necessary.  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
It continuously washes. Remaining time does not count down.  
- The machine will wait until there is sufficient  
amount of water to avoid poor washing results due  
to lack of water. Then the timer will start to count  
down.  
- Time will not count down until the selected  
temperature for the Programme is attained.  
- The automatic spin correction system might have  
been activated due to the unbalanced distribution  
of the laundry in the drum.  
In the case of a paused countdown while  
taking in water:  
- Timer will not countdown until the machine  
is filled with the correct amount of water. (On  
models with display)  
- Time might have gotten stuck during  
heating step. (On models with display)  
- The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
- No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent any  
damage to the machine and to its environment.  
In the case of a paused countdown at the  
spinning step:  
There may be an imbalance of laundry in the  
machine. (On models with display)  
It did not spin.  
- The automatic spin correction system might have  
been activated due to the unbalanced distribution  
of the laundry in the drum.  
- The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
- There may be an imbalance of laundry in  
the machine. Therefore, the Programme  
might have been completed without  
spinning.  
- The machine will not spin if the water has  
not completely drained.  
- No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent any  
damage to the machine and to its environment.  
- Check the filter.  
- Check the drain hose.  
Washing performance is poor: Laundry turns grey  
- Use the recommended amount of detergent  
- Using insufficient amount of detergent for  
a long time,  
appropriate for water hardness and the laundry.  
- Select the proper temperature for the laundry to  
be washed.  
- Washing at low temperatures for a long  
time,  
- If the water hardness is high, using an insufficient  
amount of detergent can cause laundry to turn  
grey over time.  
- It is difficult to eliminate such greyness once it  
occurs.  
- Using insufficient amount of detergent for  
hard waters (soil can stick to the laundry),  
- Using excessive amount of detergent  
(detergent can stick to the laundry).  
Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not be  
whitened.  
- Use recommended amount of detergent  
- Insufficient amount of detergent used.  
appropriate for the laundry.  
- Excessive laundry loaded into machine  
- Do not load the machine in excess.  
- Wrong Programme and temperature might  
- Select the proper Programme and temperature  
have been selected.  
for the laundry to be washed.  
- Improper detergent may have been used.  
- Put the detergent in the correct compartment.  
- Wrong type of detergent used.  
- Do not mix detergent with bleaching agents.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
- Washing performance is poor: Oily stains appear on laundry.  
- Washing performance is poor: Bad odour  
- Such odours and bacteria layers are formed on  
the drum as a result of continuous washing at  
lower temperatures and/or in short Programmes.  
- Oily accumulations on the drum may have - Leave the detergent dispenser drawer as well  
stuck to the laundry.  
as the loading door of the machine ajar after each  
- Oily accumulations on the drum may have washing. Thus, a humid environment favorable for  
stuck to the laundry.  
bacteria cannot be created inside the machine.  
- Machine must be operated empty either at  
60°C or 90°C Programme with detergent every 6  
months.  
Colour of the clothes faded.  
- Do not load the machine in excess  
- Store detergent in a closed and dry location.  
- Do not keep them under high temperatures.  
- Select the proper Programme and temperature  
according to the type and soiling degree of the  
laundry.  
- Excessive laundry loaded into machine.  
- Detergent may have gotten damp.  
- A higher temperature might have been  
selected.  
It does not rinse well.  
- Store detergent in a closed and dry location. Do  
not keep them under high temperatures.  
- If detergent is put in the prewash compartment  
although prewash cycle is not selected, machine  
- The amount, brand and storage conditions can take this detergent during rinsing or softener  
of the detergent used might not be  
appropriate.  
step.  
- Check the filter.  
- Detergent might have been put in the  
wrong compartment.  
- Check the drain hose.  
- There may be an imbalance of laundry in the  
machine.  
- The laundry in the drum may be clustered  
(bundled laundry in a bag). Laundry should be  
rearranged and re-spun.  
- Machine filter may be clogged.  
- Drain hose may be folded.  
- Intermediate spins may be skipped.  
- No spinning is performed when the laundry is  
not evenly distributed in the drum to prevent any  
damage to the machine and to its environment.  
Clothes stiffened.  
- If the water hardness is higher, using insufficient  
amount of detergent can cause the laundry to  
become stiff in time. Use appropriate amount of  
detergent according to the water hardness.  
- If detergent is put in the prewash compartment  
although prewash cycle is not selected, machine  
can take this detergent during rinsing or softener  
step.  
- Insufficient amount of detergent used.  
- The detergent may have been placed into  
the wrong compartment; the detergent may  
be mixed with the softener.  
- Do not mix the softener with detergent when  
putting in the compartment.  
- Wash and clean the drawer with hot water.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clothes do not smell like the softener.  
- If the water hardness is higher, using insufficient  
amount of detergent can cause the laundry to  
become stiff in time. Use appropriate amount of  
detergent according to the water hardness.  
- If detergent is put in the prewash compartment  
although prewash cycle is not selected, machine  
can take this detergent during rinsing or softener  
step.  
- Insufficient amount of detergent used.  
- The detergent was placed into the wrong  
compartment; the detergent was mixed with  
the softener.  
Do not mix the softener with detergent when  
putting in the compartment.  
Wash and clean the drawer with hot water.  
Detergent residue in the dispensing drawer.  
- Dry the detergent drawer before putting in  
detergent.  
- Store detergent in a closed and dry location.  
- Do not keep them under high temperatures.  
- The detergent dispenser outlet (holes) may have  
a problem.  
- There might be problems with the detergent  
dispenser valves.  
- Do not mix the softener with detergent when  
putting in the compartment.  
- Detergent may have been put in wet  
dispenser drawer.  
- Detergent may have gotten damp.  
- Water pressure might be low  
- The detergent in the main wash  
compartment might have gotten wet while  
taking in the prewash water..  
- Detergent might be mixed with the  
bleaching agent.  
There is detergent left on the laundry.  
- Excessive laundry loaded into machine.  
- Do not load the machine in excess.  
- Wrong Programme and temperature might - Select the proper Programme and temperature  
have been selected.  
- Wrong detergent may have been used.  
for the laundry to be washed.  
- Use wool detergents for woollens.  
There is too much foam  
- Use only automatic washing machine detergents  
in your washing machine.  
.
- You may not be using proper detergent for - Use only sufficient amount of detergent.  
automatic washing machines.  
- Use only sufficient amount of detergent.  
- Store detergent in a closed and dry location.  
- Do not store in excessively hot places.  
- Use smaller amounts of detergent for lace items.  
- If you put detergent in the prewash  
- Excessive amount of detergent may have  
been used.  
- Too much detergent may have been used  
for a small amount of lightly soiled laundry.  
- Detergent may have been stored improperly. compartment although you have not selected  
- Type of material being washed (lace items  
will cause excessive foam due to their  
meshed structure).  
a prewash cycle, the machine can take this  
detergent during rinsing or softener step.  
- Too much softener was put in.  
- Detergent might have been put in the wrong The detergent dispenser is problematic. Water  
compartment.  
- Softener being released early.  
is siphoned (pulling the softener into the washer  
early) during the fill or rinse cycles.  
Valves are problematic.  
There is foaming over the detergent drawer  
Mix 1 tablespoonful softener and ½ liter water  
and pour into the main wash compartment of the  
detergent drawer.  
Too much detergent was used  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Machine does work. Nothing is displayed on the screen.  
The plug might not be plugged in the mains  
outlet.  
Check the plug.  
Fuse may have blown.  
Electricity may be cut off.  
The “On/Off” button might have not been  
pressed.  
The machine did not start after the program was selected and the «Start/Pause/Cancel» button was  
pressed.  
Check the fuse.  
Check the supply power.  
Press this button.  
The front door may be ajar.  
The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your  
machine, water cut-off symbol may light up too)  
You can restart your machine by pressing the «Start/  
Water may have been cut off.  
Pause/Cancel» button for a short time after ensuring  
that the water is not cut off.  
EN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Billy Goat Lawn Mower FM3301 User Manual
Black Decker Convection Oven CTO4550SD User Manual
Black Decker Cultivator CTL36 User Manual
Briggs Stratton Portable Generator 030334 User Manual
Briggs Stratton Pressure Washer 20318 User Manual
Britax Car Seat P216800R9 User Manual
Brother Sewing Machine 884 T09 User Manual
Canon Scanner LiDE 35 User Manual
Cary Audio Design Stereo Amplifier SLP 2002 User Manual
CDA Refrigerator FW420 User Manual