Smoke
AlArm
120VAC, 60Hz Wire-in
CAT.
with 9V Battery Backup (9120B)
Description:
9120 SerieS
The BRK Brands, Inc. Cat. Nos. 9120 and 9120B are wire-in, 120V AC 60Hz single
and/or multiple station smoke alarms specifically designed for residential and
institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family dwellings as defined in standard NFPA 101. Models
9120 and 9120B comply with UL217, CSFM, NFPA 72, HUD, FHA and other agencies
that model their codes after the above agencies. They meet building codes where AC
and AC/DC with Silence smoke alarms are required. The alarms are interconnectable
with up to 18 devices, of which 12 can be smoke alarms.
(9120B only)
DUAl ioNiZATioN
Dual Ionization sensing chamber.
Generally more effective at detecting
small particles produced by flaming
fires. Sources may include paper or
kitchen grease.
The BRK® 9120 Series alarms feature a dual ionization smoke sensing chamber - screened
for insect protection, an 85dB horn, 9V battery back-up (all versions except model 9120) and
a “silence” feature. The “Smart Technology” system is designed to reduce nuisance alarms.
“LatchingAlarm Indication”remembers which unit initiated an alarm.When interconnected in
a series, the unit that triggered the alarm rapidly flashes its red LED indicator.After the alarm
condition subsides,the initiating unit will store in memory or“latch”the information and begin
to flash the green LED indicator 2 seconds on, 2 seconds off. The “Perfect Mount” system
features a gasketless base and a mounting bracket that keeps the alarm secure over a wide
rotation range to allow for true alignment. This will allow fine-tuning on the positioning to
compensate for out of aligned wall studs and to keep the wording level when wall mounting.
A Single button test/silence button eliminates confusion. Depending on what mode the alarm
is in, pushing the button will test, silence, re-test the alarm when in silence and clear the
latching feature. Battery installation and removal can occur while the unit is mounted to
the ceiling or wall via the side load battery compartment. Other Contractor
Preferred features include a dust cover to keep alarm clean during
lATCHiNG AlArm iNDiCATor
Remembers which unit initiated an
alarm.
SmArT TeCHNoloGY
Helps reduce the number of non-
emergency or nuisance alarms.
SiNGle BUTToN TeST/SileNCe
One touch button combines both
features
construction, keyhole slots in the mounting bracket
eliminatetheneedtoremovetheelectricalboxscrewsfor
installation. Two locking features are provided to
prevent battery theft and/or theft of the unit.
Connection to AC power is made with a
“Quick-Connect” wiring harness. Installa-
tion is quick, easy and cost effective.
TWo loCkiNG FeATUreS
Pins are provided to lock battery
drawer and/ or alarm to base. Great
for apartment, dormitory or hotel
applications where unauthorized
removal of battery or alarm is not
desired.
Available in the following versions:
9120
AC Alarm with silence
9120B
9120AB
9120LB
9120B-48P
9120B-48B
9120B-GFD
91206CP
9120B6CP
AC Alarm with silence and battery backup
Same as 9120B but with alkaline battery
Same as 9120B but with lithium battery
48 pack of Boxed 9120B
48 pack of Bulk 9120B
18 count Gravity Feed Display
Contractor Bulk 6-pack of 9120 Alarm
Contractor Bulk 6-pack of 9120B Alarm
Listed to
Standard
Download from Www.Somanuals.com. All Manuals Search And Download.
|