Floor Standing-Type
Air Conditioner
OWNER'S MANUAL
Prior to installation, this air-conditioning
unit must be submitted for approval by the
utility service which provides electricity
(EN 61000-3 Norm).
MODELS:
LG-BKE 9300 D
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating your air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
I Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
This symbol indicates the possibility of death or serious injury.
WARNING
This symbol indicates the possibility of injury or damage.
CAUTION
I Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
I Installation
Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.
For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.
Always ground the product.
• There is risk of fire or electric
shock.
• Do not disassemble or repair the • There is risk of fire or electric
product. There is risk of fire or
electric shock.
shock.
Install the panel and the
cover of control box
securely.
Always install a dedicated
circuit and breaker.
Use the correctly rated
breaker or fuse.
• There is risk of fire or electric
shock.
• Improper wiring or installation
may cause fire or electric shock
• There is risk of fire or electric
shock.
Owner's Manual 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Do not modify or extend the
power cable.
Do not install, remove, or re-
install the unit by yourself
(customer).
Be cautious when unpacking
and installing the product.
• There is risk of fire or electric
shock.
• There is risk of fire, electric
shock, explosion, or injury.
• Sharp edges could cause injury.
Be especially careful of the case
edges and the fins on the
condenser and evaporator.
Do not install the product on a
defective installation stand.
Be sure the installation area
does not deteriorate with age.
For installation, always contact the
dealer or an Authorized Service Center.
• It may cause injury, accident, or
damage to the product.
• If the base collapses, the air
conditioner could fall with it,
causing property damage,
product failure, and personal
injury.
• There is risk of fire, electric
shock, explosion, or injury.
I Operation
Do not let the air conditioner run for a
long time when the humidity is very high
Take care to ensure that power
cable could not be pulled out or
damaged during operation.
Do not place anything on the
power cable.
and a door or a window is left open
.
• Moisture may condense and wet • There is risk of fire or electric
• There is risk of fire or electric
shock.
or damage furniture.
shock.
Do not plug or unplug the
power supply plug during
operation.
Do not touch(operate) the
product with wet hands.
Do not place a heater or
other appliances near the
power cable.
• There is risk of fire or electric
shock.
• There is risk of fire or electrical
shock.
• There is risk of fire and electric
shock.
4 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Do not allow water to run
into electric parts.
Do not store or use flammable
gas or combustibles near the
product.
Do not use the product in a
tightly closed space for a
long time.
• It may cause There is risk of fire,
failure of the product, or electric
shock.
• There is risk of fire or failure of
product.
• Oxygen deficiency could occur.
Gasolin
When flammable gas leaks,
turn off the gas and open a
window for ventilation
If strange sounds, or small or
smoke comes from product. Turn
the breaker off or disconnect the
power supply cable.
Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.
before turn the product on.
• Do not use the telephone or turn
switches on or off.
• There is risk of electric shock or
fire.
• There is risk of property damage,
failure of product, or electric shock.
There is risk of explosion or fire
Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)
When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.
Be cautious that water could
not enter the product.
• There is risk of physical injury,
electric shock, or product failure.
• There is risk of fire or electric
shock.
• There is risk of fire, electric shock,
or product damage.
Ventilate the product from time to time when
operating it together with a stove, etc.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of fire or electric shock.
• There is risk of electric shock.
Owner's Manual 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
When the product is not be used for a long
time, disconnect the power supply plug or
turn off the breaker.
Take care to ensure that nobody could step
on or fall onto the outdoor unit.
• There is risk of product damage or failure, or
unintended operation.
• This could result in personal injury and product
damage.
CAUTION
I Installation
Always check for gas
(refrigerant) leakage after
installation or repair of product.
Install the drain hose to
ensure that water is drained
away properly.
Keep level even when
installing the product.
• Low refrigerant levels may cause
failure of product.
• A bad connection may cause
water leakage.
• To avoid vibration or water
leakage.
90˚
Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.
Use two or more people to
lift and transport the
product.
Do not install the product where
it will be exposed to sea wind
(salt spray) directly.
• It may cause a problem for your
neighbors.
• Avoid personal injury.
• It may cause corrosion on the
product. Corrosion, particularly on
the condenser and evaporator fins,
could cause product malfunction or
inefficient operation.
I Operation
Do not expose the skin directly to cool air for
long periods of time.
(Don't sit in the draft.)
Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.
• This could harm to your health.
• There is risk of
damage or
loss of property.
6 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Do not block the inlet or
outlet of air flow.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
Do not touch the metal parts of
the product when removing the
air filter. They are very sharp!
• It may cause product failure.
• There is risk of fire, electric shock,
or damage to the plastic parts of
the product.
• There is risk of personal injury.
Do not step on or put
anyting on the product.
(outdoor units)
Always insert the filter securely.
Clean the filter every two weeks
or more often if necessary.
Do not insert hands or other
objects through the air inlet or
outlet while the product is operated.
• There is risk of personal injury
and failure of product.
• A dirty filter reduces the efficiency • There are sharp and moving parts
of the air conditioner and could
cause product malfunction or
damage.
that could cause personal injury.
Do not drink the water
drained from the product.
Use a firm stool or ladder
when cleaning or
maintaining the product.
Replace the all batteries in the
remote control with new ones of
the same type. Do not mix old
and new batteries or different
types of batteries.
• It is not sanitary and could cause
serious health issues.
• Be careful and avoid personal
injury.
• There is risk of fire or explosion
Do not recharge or disassemble the batteries.
Do not dispose of batteries in a fire.
If the liquid from the batteries gets onto your
skin or clothes, wash it well with clean water. Do
not use the remote if the batteries have leaked.
• They may burn or explode.
• The chemicals in batteries could cause burns or other
health hazards.
Owner's Manual 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Operating Instructions
Features and Specifications
1. Design for cooling and heating
2. Super energy efficiency
3. Micom control
6. 2 cooling/heating speeds
7. Removable air filter
8. Anti-Bacteria filter
9. 3 minutes delay circuit
4. Whisper quiet operation
5. Wireless remote control
Air Outlet Vent
Air Intake Vent
(Rear)
Remote Signal
Receptor
Air Outlet
Vent
Air Intake Vent
Piping
8 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Indoor Unit Controls and Indicators
8
9
7
6
13
2
4
1
5
A/CL
3
12 10
11
Owner's Manual 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Indoor Unit Controls and Indicators
1. START/STOP BUTTON
10. DEFROST OPERATION LAMP
Operation starts when this button is pressed and
stops when the button is pressed again.
11. OFF TIMER OPERATION LAMP
12. OUTDOOR UNIT OPERATION LAMP
13. ELECTRIC HEATER OPERATION LAMP
2. OPERATION MODE SELECTION
BUTTON
Used to select the operation Mode.
3. ROOM TEMPERATURE SETTING
BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTION
Used to select fan speed in two steps-low, med.
5. HEATER OPERATION BUTTON
6. AIR CLEANER OPERATION LAMP
FAN OPERATION LAMP
7. COOLING OPERATION LAMP
8. SOFT DRY OPERATION LAMP
9. HEATING OPERATION LAMP
10 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Remote-Controller for MODEL
1
15
2
4
A/CL
11
9
10
12
7
8
13
14
3
6
5
Owner's Manual 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Name and Function-Remote Control
1. Signal Transmitter
• Transmits the signals to the floor standing type air conditioner
2. Operation Display of the Remote Control
3. Indoor Fan Speed Selection Button
• To select the desired fan speed in two steps [Low, Mid]
4. Cooling ON Button
5. Temperature Setting Buttons
6. Power ON/OFF Button
• Operation will start when this button is pressed, and stop when the button is pressed again.
7. Auto Airfloor Direction Control Button
• The horizontal louvers swing up and down.
8. Auto Airflow Direction Control Button
• The vertical louvers swing left and right.
9. Heating Button (Heat Pump Model)
10. Plasma Air purifying Button
11. Timer Set Button
• Each time the button is pressed, the mode is changed in the following process.
Time set (1, 2, 3, 4, 5, 6, 7 hours)
If you select "0" the off Timer function will be cancelled.
12. Soft Dry Operation Button
13. JET Cool Operation Button
(If you select JET Cool Operation Button, display shows "Po")
14. Auto Air Flow Operation Button(No application)
15. Electric Heater On/Off Button (Heat pump & Heater Model only)
Wireless Remote Control Puts all functions at your fingertips
Handling the remote control
• Aim at the signal receptor on the floor standing type air
conditioner when operating.
• The remote control signal can be received at a distance of up to
about 7meters.
• Be sure that there are no obstructions between the remote
control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct
sunlight, or next to a heating unit, or other heat source.
12 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Remote Control Preparation
1. How to mount onto a wall
Use the screws to secure the holder to the wall or attach the holder side of indoor unit.
2. To insert the remote control to the holder.
Insert
Pull
How to insert batteries
• Do not use rechargeable batteries
such batteries as different from
standard dry cells in shape,
1. Remove the cover from the back of the
remote controller.
• Slide the cover according to the arrow
direction.
dimensions, and performance.
• Change the batteries with a new
one if the remote control does not
work properly after using for an
extended length of time.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Slide the cover into back position.
Owner's Manual 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
How to use the Operation Mode Button
• Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted in the arrow direction.
Cooling Operation
Soft Dry Operation
Heating Operation
How to use the Fan speed Button
• Each time the Fan speed Button is pressed, the Fan speed is shifted in the arrow direction.
Low
Mid
14 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Cooling Operation Mode
Press the Start/Stop Button.
1
Select Cooling Operation.
Press the Operation Mode Selection Button.
Press the Cooling Operation Button on the remote controller.
2
A/CL
Set the temperature lower than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
3
4
To raise the temperature
To lower the temperature
Set the Fan Speed.
❑ Each time the Fan Speed Button is
pressed, the Fan Speed mode is
shifted in the arrow direction.
Owner's Manual 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Soft Dry Operation
Press the Start/Stop Button.
1
Select Soft Dry Operation.
Press the Operation Mode Selection Button.
Press the Soft Dry Operation Button on the remote controller.
2
A/CL
Set the temperature lower than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
3
To raise the temperature
To lower the temperature
During softy Dry Operation
• The indoor fan speed is automatically set to low and can be set fan speed.
16 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Heating Operation Mode(Heat Pump Model)
Press the Start/Stop Button.
1
Select heating Operation.
2
Press the Operation Mode Selection Button.
Press the heating Operation Button on the remote controller.
A/CL
Set the temperature upper than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
3
4
To raise the temperature
To lower the temperature
Set the Fan Speed.
❑ Each time the Button is pressed, the
Fan Speed mode is shifted.
Owner's Manual 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Auto Operation Mode(Cooling Model Only)
Press the Start/Stop Button.
1
Select Auto Operation.
Press the Operation Mode Selection Button.
Press Auto Operation Button.
2
A/CL
Set the temperature upper or lower than the standard temperature.
The temperature can be set within a range of
by 1 level.
3
Cold Cool Proper
Warm Hot
(This indication will be shifted to the initial Auto Mode Display state after 4 seconds.)
To raise the temperature. (When you feel too cool or cold)
To lower the temperature. (When you feel too warm or hot)
During Auto Operation
• It is impossible to switch the indoor fan speed because of being already set to the best
conditioner by fuzzy rule.
18 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Electric Heater Operation Mode(Heat pump & Electric heater product only)
Press the Start/Stop Button.
1
Select heating Operation by pressing the Opertion Mode Selection button.
2
Press the Heater Operation Button on the remote controller.
HEATER
Set the temperature upper than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
3
4
To raise the temperature
To lower the temperature
Set the Fan Speed.
❑ Each time the Button is pressed, the
Fan Speed mode is shifted.
Owner's Manual 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL)
Press the Start/Stop Button.
1
Select Function.
2
Press the Timer Button.
3
A/CL
• If you press the button, the selected off timer is displayed as follows;
• If you select ‘ ’, the Off Timer function will be cancelled.
When you finish the Off Timer setting, the Timer indicator lights off.
4
After 4 seconds
During off-timer operation if you press the Timer Button, the rest time will be displayed.
5
20 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Plasma Air Purifying Operation Procedure
Air Purifying Operation only
1
Press the Plasma Air Purifying Operation Start/Stop Button.
1
A/CL
(Operation will start when the button is pressed, and stop when the button is pressed again.)
Select Fan speed.
2
The display shows low fan speed at the initial condition.
Low
Mid
• You can operate the Plasma Air Purifying under the unit operation of cooling, heating, soft
dry or Auto mode.
Air Purifying Operation with Cooling or any other Operateion.
2
1. Press the Start/Stop Button.
2. Select the desired Operation Mode.
3. Press the Plasma Air Purifying Operation ON/OFF Button.
4. Set the fan speed.
Owner's Manual 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Fan Operation Mode
Press the Start/Stop
Press Fan Operation Button.
Button.
1
2
Set the Fan Speed.
3
❑ Each time the Button is pressed, the
Fan Speed mode is shifted.
Airflow Direction Procedure
Press the Auto Swing Button and then
louvers will swing left and right.
Press the Airflow Direction
Control Button again to set
the Vertical louver at the
Press the Start/Stop Button.
1
2
desired airflow direction.
The vertical louver swing left and right.
The horizontal louver swing up and down.
(Operation will start when the button is pressed,
and stop when the button is pressed again.)
22 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Jet Cool Operation
Press the Start/Stop Button.
1
On/Off
Press the Jet Cool button to operate the speed cooling mode and the unit will operate in high
fan speed on cooling mode.
2
3
To cancel the Jet Cool mode, press the Jet Cool button again or the fan speed button or the
room temperature setting button and the unit will operate in mid fan speed on cooling mode.
or
or
NOTE:
❏ During the JET COOL function at any moment, the A/C starts to blow the cool air at
extremely high speed setting the room temp. automatically to 18°C. It is especially used to
cool the room temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode however, the JET COOL function is not available.
❏ In order to return to the normal cooling mode from the JET COOL mode, you just press either
the operation mode selection button, airflow volume selection or temp. setting button or the
JET COOL button again.
Owner's Manual 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Child Lock Operation Procedure
Press the fan speed button and High temperature setting buttons simultaneously for 3 conds.
The unit will respond with beep.
1
After 3 second,
it will shift
After 3 seconds,
it will shift
During Child Lock Operation
2
3
– Whenever you press any Button on Display Panel, it will immediately display
”, which means Display panel is Locked.
❷ All the Button on the indoor unit Display panel will not work.
“
❸ But the Button on the remote controller will work.
For releasing child lock Operation
Press the fan speed button and High temperature setting buttons simultaneously for 3 conds.
The unit will respond with beep, Child Lock Operation will removed.
After pressing
the buttons
it will shift
After 3 seconds,
it will shift
immediately
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to
operate procedures automatically to the previous operating conditions.
24 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Service
Maintenance and Service
CAUTION: Before performing any maintenance, turn off the main power to the system.
During the season
Cleaning of the air cleaner.
Recommended about once every three months
Cleaning of the air filters.
Recommended about once every two weeks
Remove the Air Filter.
Take hold of the tab and pull slightly forward to
remove the filter.
Remove the Air Cleaner.
Take hold of the tab and pull slightly forward to
remove the air cleaner.
Clean.
Clean.
• Dip the air cleaner into the water mixed with
detergent, for 20~30 minutes, and dry in the shade.
• Re-insert the air cleaner to the original position.
•
To remove the dust adhering to the filters, either use a
vacuum cleaner, or wash them in water and dry in the
shade.
• Re-insert the filter to the original position.
Never use any of the followings.
Cleaning of the air conditioner
• Water hotter than 40°C.
Could cause deformation
and/or discoloration.
• Volatile substances.
Could damage the surfaces
of the air conditioner.
• Don’t wash with water.
• Wipe with a soft dry cloth.
When the air conditioner is not going to be used for a long time.
At the start of the season
At the end of the season
Operate the air conditioner at the following
settings for 2 to 3 hours.
• Type of operation : Cooling.
Clean the air filters, re-insert, then operate
the air conditioner.
• Temperature setting : 30°C.
This will dry out the internal mechanisms.
Remove the batteries from the Remote Control.
Turn off the circuit breaker.
Be sure that nothing obstructs the air outlet
and intake vents.
CAUTION
Turn off the circuit breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Operation Tips
Do not overcool the room.
Keep blinds or curtains closed.
Do not let direct sunshine enter the room
Keep the room temperature uniform.
This is not good for your health and
wastes electricity.
Adjust the vertical and horizontal airflow
direction to ensure a uniform temperature
in the room.
when the air conditioner is in operation.
Make sure that the doors and windows
are shut tight.
Clean the air filter regularly.
Ventilate the room occasionally.
Blockages in the air filter reduce the
airflow and lower cooling and
dehumidifying effects. Clean at least once
every two weeks.
Since windows are kept closed, it is a
good idea to open them and ventilate the
room now and then.
Avoid opening doors and windows as
much as possible to keep the cool air in
the room.
Owner's Manual 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Service
Troubleshooting
Check the following points before requesting repairs or service.... If the malfunction persist, please contact your
dealer.
Case
Explanation
See page
Does not operate.
• Have you made a mistake in timer operation?
• Has the fuse blown or has the circuit breaker been
tripped?
• Is the power Switch at Off?
• Is the unit at the starting of Heating Operation?
If yes, Hot-start is activating.
-
• Is the unit in the Deicing?
If yes, wait for finishing the Deicing.
• Check that this is not a damp smell exuded by the
walls, carpet, furniture, or cloth items in the room.
The room has a peculiar
odor.
-
-
• Condensation occurs when the airflow from the air
conditioner cools the warm room air.
It seems that condensation is
leaking from the air
conditioner.
• This is the Protection device of the air conditioner .
• Wait about three minutes and operation will begin.
• If the airflow begins before its temperature become
warm, it will cause an undesired cooling effect. In
order to prevent this, the airflow will not begin until
it is sufficiently warm.
Air conditioner does not
operate for about 3 minutes
when restarted.
• Is the air filter dirty? See air filter cleaning
instructions.
• The room may have been very hot when the room
air conditioner was first turned on. Allow time for it
to cool down.
Does not cool or heat
effectively.
25
-
• Has the temperature been set incorrectly?
• Are the indoor unit's air inlet or outlet vents
obstructed?
-
• For a noise that sounds like water flowing.
-This is the sound of freon flowing inside the air
conditioner unit.
• For a noise that sounds like the compressed air
releasing into atmosphere.
The air conditioner operation
is noisy.
-
-This is the sound of the dehumidifying water being
processed inside the air conditioning unit.
• Are the batteries depleted?
Remote controller display is
faint, or no display at all.
• Are the batteries inserted in the opposite (+) and (-)
13
directions?
26 Floor Standing-Type Air Conditioner
Download from Www.Somanuals.com. All Manuals Search And Download.
|