Behringer Stereo Amplifier MX882 User Manual

User’s Manual  
Version 1.2 März 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
FOREWORD  
Dear Customer,  
Welcome to the team of ULTRALINK PRO users and thank you very much for expressing your confidence in  
BEHRINGER products by purchasing this unit.  
It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of  
hard work delivered by our engineering team to reach a very ambitious goal: making an outstanding device  
better still. The ULTRALINK has for quite a long time been a standard tool used by numerous studios and P.A.  
rental companies. The task to improve one of our best-selling products certainly meant a great deal of  
responsibility, which we assumed by focusing on you, the discerning user and musician. It also meant a lot of  
work and night shifts to accomplish this goal. But it was fun, too. Developing a product usually brings a lot of  
people together, and what a great feeling it is when everybody who participated in such a project can be proud  
of what we’ve achieved.  
It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER  
family. With your highly competent suggestions for new products you’ve greatly contributed to shaping our  
company and making it successful. In return, we guarantee you uncompromising quality (manufactured under  
ISO9000 certified management system) as well as excellent technical and audio properties at an extremely  
favorable price. All of this will enable you to fully unfold your creativity without being hampered by budget  
constraints.  
We are often asked how we can make it to produce such high-grade devices at such unbelievably low prices.  
The answer is quite simple: it’s you, our customers! Many satisfied customers means large sales volumes  
enabling us to get better conditions of purchase for components, etc. Isn’t it only fair to pass this benefit back  
to you? Because we know that your success is our success, too!  
I would like to thank all people whose help on “Project ULTRALINK PRO” has made it all possible. Everybody  
has made very personal contributions, starting from the designers of the unit via the many staff members in our  
company to you, the user of BEHRINGER products.  
My friends, it’s been worth the trouble!  
Thank you very much,  
Uli Behringer  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
ULTRALINK PRO  
Ultra-flexible, multi-purpose 8-channel Signal Router for stage and studio applications  
s
Use it as Effects Mixer, for P.A. Monitoring, Live Sound Systems, Theaters, Conference Rooms, Hotels,  
Churches, etc.  
s
s
s
s
s
s
s
s
Any channel can be selected either as Mixer or Splitter  
You can use it as 8-IN, 2-OUT Line Mixer  
You can use it as 2-IN, 8-OUT Line Splitter  
You can use it as 6-IN, 6-OUT Line Driver or DI-box  
You can use it as independent line driver to convert -10 dBV into +4 dBu or vice versa  
Extremely high headroom—offering more dynamic range  
Ultra-wide bandwidth from 2 Hz to 200 kHz for “open” sound  
Offers you 6 mono inputs, 6 mono outputs, 2 main inputs and 2 main outputs  
s
s
s
s
s
s
s
Offers you 6 Input Level controls, 6 Balance/Pan controls, a Main Input and a Main Output control  
A Main Link switch allows you to route the Main Input to the Main Output to link several units  
Accurate 4 / 8-segment LED metering for each individual gain section  
Servo-balanced gold-plated XLR and 1/4" TRS inputs and outputs  
Completely versatile DI-Box due to servo-balanced inputs and outputs  
Ultra low-noise 4580 audio operational amplifiers for outstanding sound performance  
High-quality detented potentiometers and illuminated switches  
s
Manufactured under ISO9000 certified management system  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
TABLE OF CONTENTS  
1. INTRODUCTION.....................................................................................................................6  
2. THE DESIGN CONCEPT .......................................................................................................7  
2.1 High quality components and design ............................................................................................... 7  
2.2 Inputs and outputs .......................................................................................................................... 7  
2.2.1 Balanced inputs and outputs................................................................................................. 7  
3. INSTALLATION .......................................................................................................................7  
3.1 Rack mounting................................................................................................................................ 7  
3.2 Mains voltage .................................................................................................................................. 7  
3.3 Audio connections .......................................................................................................................... 8  
4. CONTROL ELEMENTS .........................................................................................................9  
4.1 The front panel control elements ..................................................................................................... 9  
4.2 The rear panel elements ................................................................................................................ 10  
5. BLOCK DIAGRAM ................................................................................................................ 11  
6. APPLICATIONS .....................................................................................................................12  
6.1 Application as a mixer .................................................................................................................. 12  
6.2 Application as a splitter................................................................................................................. 13  
6.2.1 The ULTRALINK PRO as a 4-channel stereo splitter ........................................................... 13  
6.3 Application as a matching amplifier ............................................................................................... 14  
7. SPECIFICATIONS .................................................................................................................15  
8. WARRANTY..................................................................................................................... ......16  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
1. INTRODUCTION  
With the BEHRINGER ULTRALINK PRO you have purchased an ultra-flexible “problem solver” in signal  
distribution applications, designed to meet highest requirements: professional recording, broadcast and  
television studios, CD and digital production facilities, etc. Much like an all-in-one tool, it provides virtually  
unlimited configurations. Be it the distribution of a stereo signal to several outputs (splitter); the combination of  
separate signals to one stereo output (mixer), or the specific level adaption of individual signals (buffer  
amplifier): the ULTRALINK PRO can perform all of these functions easily - and simultaneously.  
Future-oriented BEHRINGER technology  
Our ULTRALINK range of devices has been a hit ever since we introduced our first model several years ago.  
This splitter/mixer is based on many years of experience and findings in mixing technology and is used  
throughout the world in renowned studios, sound reinforcement systems as well as in broadcast and television  
studios.  
It was a real challenge to improve the well-known ULTRALINK even further, and we are proud of our success.  
Compared to its predecessor models, the ULTRALINK PRO not only has additional features, but also comes  
with dramatically improved functionality. For example, it now has input and output level meters and balanced  
in- and outputs.  
The architecture of the ULTRALINK PRO  
Basically, the unit consists of six mono channels, which can be used either as a splitter or as a mixer. For  
instance, a stereo program source can be inserted via the main input to be subsequently routed to any of the  
mono channels that are set to SPLIT mode. Using the individual BALANCE/PAN control, you can—for each  
channel—determine the ratio between the left and right main input signals that are routed to the corresponding  
output of the channels. Thus, the stereo input signal coming from the main input section can be distributed  
selectively among the six mono output channels.  
In MIX mode, the input signals from the respective channel(s) can be mixed at the stereo main output, with the  
individual BALANCE/PAN control determining the signal ratio between the left and right main outputs (pan  
function). It is of particular advantage that, in MIX mode, the stereo input signal from the main input section is  
alternatively routed to the main outputs. By using this feature a total of up to 8 single signals can be combined.  
In MIX mode, the mono input signals are simultaneously applied to the respective mono outputs, which permits  
each channel to be used as an individual matching amplifier. The LEVEL controls in the corresponding  
channels enable the user to adapt the levels at will, with a maximum gain of +15 dB. Levels used in home-  
recording can therefore be converted into studio levels (+4 dBu), and vice versa.  
Typical applications  
The ULTRALINK PRO MX882 is one of the most flexible systems of its type. The following applications can be  
realized:  
2 IN/8 OUT splitter, 8 IN/2 OUT mixer, 6 IN/6 OUT matching amplifier or any other combination.  
s
s
Keyboard submixer  
Distribution amplifier for P.A. systems, discotheques, theatres, churches, hotels, communication  
systems, etc.  
s
s
s
Add-on module for mixer channels  
Add-on module for effect and monitor paths  
Level translator from -10 dBV to +4 dBu etc.  
By combining several ULTRALINK PROs you can set up, for instance, a 24-channel mixer or splitter.  
+
The following operational manual will introduce you to the BEHRINGER ULTRALINK PRO and  
its various functions. After reading the manual carefully, make sure it is always on hand for  
future reference.  
6
1. INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
2. THE DESIGN CONCEPT  
2.1 High quality components and design  
The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the  
best choice of components. The operational amplifiers NJM4580 which are used in the ULTRALINK PRO, are  
exceptional. They boast extreme linearity and very low distortion characteristics. To complement this design  
the choice of components includes high tolerance resistors and capacitors, detent potentiometers and several  
other stringently selected elements.  
For the first time, the ULTRALINK PRO MX882 uses SMD technology (Surface Mounted Device). These  
sub-miniature components known from aerospace technology allow for an extreme packing density and  
improved reliability. Additionally, the unit is manufactured in compliance with a ISO9000 certified management  
system.  
2.2 Inputs and outputs  
2.2.1 Balanced inputs and outputs  
As standard, the BEHRINGER ULTRALINK PRO is installed with electronically servo-balanced inputs and  
outputs. The new circuit design features automatic hum and noise reduction for balanced signals and thus  
allows for trouble-free operation, even at high operating levels. Externally induced mains hum etc. will be  
effectively suppressed. The automatic servo-function recognizes the presence of unbalanced connectors and  
adjusts the nominal level internally to avoid level differences between the input and output signals (correction  
6 dB).  
3. INSTALLATION  
Your BEHRINGER ULTRALINK PRO was carefully packed in the factory and the packaging was designed to  
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging  
and its contents for any signs of physical damage, which may have occurred in transit.  
+
If the unit is damaged, please do not return it to us, but notify your dealer and the shipping  
company immediately, otherwise claims for damage or replacement may not be granted.  
Shipping claims must be made by the consignee.  
3.1 Rack mounting  
The BEHRINGER ULTRALINK PRO fits into one standard 19" rack unit of space (1 3/4"). Please allow at least  
an additional 4" depth for the connectors on the back panel. Be sure that there is enough air space around the  
unit for cooling and please do not place the ULTRALINK PRO on high temperature devices such as power  
amplifiers etc. to avoid overheating.  
3.2 Mains voltage  
Before you connect your ULTRALINK PRO to the mains, please make sure that your local voltage  
matches the voltage required by the unit! The fuse holder on the female mains connector has 3 triangular  
markers, with two of these triangles opposing each other. Your ULTRALINK PRO is set to the operating voltage  
printed next to these markers, and can be set to another voltage by turning the fuse holder by 180°. CAUTION:  
this instruction does not apply to export models exclusively designed, e.g. for 115 V operation!  
2. THE DESIGN CONCEPT  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
3.3 Audio connections  
The audio inputs and outputs on the BEHRINGER ULTRALINK PRO are fully balanced. If possible, connect the  
unit to other devices in a balanced configuration to allow for maximum interference immunity.  
Unbalanced use of  
Balanced use of  
mono 1/4" jack plugs  
stereo 1/4" jack plugs  
Tip =  
Signal  
Tip =  
hot (+ve)  
Ring =  
cold (-ve)  
Sleeve =  
Ground / Shield  
Sleeve =  
Ground / Shield  
Tip  
Tip  
Ring  
Sleeve  
Sleeve  
Strain relief clamp  
Strain relief clamp  
For connection of balanced and  
unbalanced plugs, ring and sleeve have  
to be bridged at the stereo plug.  
Balanced use with XLR connectors  
2
1
1
2
1 = Ground / Shield  
2 = hot (+ve)  
3 = cold (-ve)  
3
3
Input  
Output  
For unbalanced use pin 1 and pin 3 have to be bridged  
Fig. 3.1: Different plug types  
+
Please ensure that only qualified persons install and operate the ULTRALINK PRO. During  
installation and operation the user must have sufficient electrical contact to earth. Electro-  
static charges might affect the operation of the ULTRALINK PRO!  
8
3. INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
4. CONTROL ELEMENTS  
Fig. 4.1: ULTRALINK PRO front panel  
The BEHRINGER ULTRALINK PRO has six identical channels. Each channel is equipped with two rotary  
controls, one button and eight LEDs. Moreover there is a main section with two rotary controls, one button and  
eight LEDs.  
4.1 The front panel control elements  
Fig. 4.2: Control elements on the front panel  
1
2
3
4
The MAIN INPUT LEVEL control sets the main input gain, before the signal reaches the input bus. In  
SPLIT mode, the MAIN INPUT LEVEL control determines the common output level for all mono outputs.  
The 4-digit INPUT LEVEL meter informs you about the input level of the main input within a range from  
-24 to +6 dB.  
By depressing the MAIN LINK switch you can route the MAIN INPUT signal to the MAIN OUT. This way  
it is possible to route a maximum of eight input channels to the main mix.  
The MAIN OUTPUT LEVEL control adjusts the output level applied to the main outputs. The levels  
present at the six mono outputs are not affected. Summing the signal levels of several mono channels  
can overload the main output stage. The MAIN OUTPUT LEVEL control is therefore used to adjust the  
overall output level.  
5
The 4-digit OUTPUT LEVEL meter informs you about the output level of the main input within a range  
from -24 to +6 dB.  
6
7
This SPLIT/MIX switch sets the respective channel to SPLITTER or MIXER mode.  
The LEVEL control determines the signal level of the individual channels. In SPLIT mode, the LEVEL  
control sets the output level of the mono channels. In MIX mode, however, it controls the amount of the  
mono channel's input signal feeding into the main output section; at the same time, the level of the mono  
channel can be determined, which—owing to the maximum gain of +15 dB—allows for converting, e.g.,  
home recording levels (-10 dBV) into studio levels (+4 dBu).  
8
The 8-digit OUTPUT LEVEL meter informs you about the output level of each channel within a range  
from -24 to +18 dB.  
4. CONTROL ELEMENTS  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
9
With the BALANCE/PAN control you can set the balance between the left and right main signals. In  
SPLIT mode, the main input signal is routed to the mono output, with the BALANCE control determining  
the balance beween the left and right main signal portions. In MIX mode, the mono inputs are mixed and  
routed via the LEVEL control to the main outputs, with the PAN controls determining the allocation of  
the mono inputs to the left and right main outputs.  
4.2 The rear panel elements  
Fig. 4.3: Rear panel elements  
10  
FUSE HOLDER / VOLTAGE SELECTOR. Please make sure that your local voltage matches the  
voltage indicated on the unit, before you attempt to connect and operate the ULTRALINK PRO. Blown  
fuses may only be replaced by fuses of the same type and rating.  
11  
12  
13  
14  
MAINS CONNECTION. Use the enclosed power cord to connect the unit to the mains. Please also note  
the instructions given in chapter 3 “INSTALLATION” .  
MAIN INPUTS. These are the main audio inputs of your ULTRALINK PRO, available as balanced XLR  
connectors. They may feed the mono outputs of all channels which are operated in SPLIT mode.  
MAIN OUTPUTS. These are the main outputs, available as balanced XLR connectors. They may be fed  
either by the left and right main inputs or by any of the six mono inputs (or a combination of both).  
MONO INPUTS (channel 1 to 4). These are the mono inputs. Connection takes place via balanced XLR  
connectors.  
15  
16  
MONO OUTPUTS (channel 1 to 4). These are the mono outputs, available as balanced XLR connectors.  
MONO INPUTS (channel 5 to 6). These are the mono inputs. Connection takes place via balanced  
phone jacks.  
17  
MONO OUTPUTS (channel 5 to 6). These are the mono outputs, available as balanced phone jacks.  
+
Please take the time to fill in and return the warranty card within 14 days after the date of  
purchase, so as to benefit from our extended warranty. Or use our online registration option  
10  
4. CONTROL ELEMENTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
5. BLOCK DIAGRAM  
Fig. 5.1: Block diagram of the BEHRINGER ULTRALINK PRO MX882  
MAIN Section  
Both main inputs interface via the MAIN INPUT LEVEL control with the input bus as well as with the main  
outputs. The MAIN OUTPUT LEVEL control determines the output level of the signals which are summed by  
the second bus (i.e., the output bus) and are subsequently routed to the main outputs.  
SPLIT Mode  
In SPLIT mode, the main input signal is sent via the BALANCE control to the output buffer amplifiers of the  
mono channels, with the LEVEL control determining the output level of the respective channel. The maximum  
gain is +15 dB.  
MIX Mode  
In MIX mode, the input signals of the mono channels are “collected” via the LEVEL and PAN controls and are  
routed to the output bus. In this mode, the LEVEL control determines the amount of each channel at the output  
bus, while the PAN control is responsible for the allocation of the input signal to the left and right main outputs.  
Additionally, the input signal is routed to the respective mono outputs, i.e., the circuit acts as a matching  
amplifier. The LEVEL control allows for level compensation of up to +15 dB.  
5. BLOCK DIAGRAM  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
6. APPLICATIONS  
6.1 Application as a mixer  
Fig. 6.1: Block diagram of the MIXER function  
When the mono channels are operated in MIX mode, a maximum of 8 (6+2) mono input signals can be  
summed and routed to the main outputs. In this mode, the individual signal sources are connected to the mono  
inputs on the BEHRINGER ULTRALINK PRO. Each channel has a LEVEL knob to control the amount of its  
signal relative to others in the main section. Via the corresponding PAN control, each mono input signal can be  
routed either to the left or right main output. Of course, any intermediate pan settings can be achieved as well.  
The MAIN OUTPUT LEVEL control determines the overall level of the main output signal.  
Since the two main inputs are alternatively routeable to the main outputs, two additional input signals can be  
added using the main inputs. For this you have to depress the MAIN LINK switch. However, as these inputs do  
not feature a PAN control, the left main input will always be routed to the left main output; similarly, the right  
main input can only be sent to the right main output. A total of 8 mono channels can thus be routed to two  
main outputs.  
12  
6. APPLICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
6.2 Application as a splitter  
Fig. 6.2: Block diagram of the SPLITTER function  
A splitter is a distribution amplifier which allows for splitting a specific input signal to several outputs. This  
function is of use, e.g., in a large-scale sound reinforcement system where the mixer's output signal needs to  
be allocated to several power amplifiers. Another field of application is in tape duplication systems, where one  
master tape machine is to be interfaced with several tape duplication recorders.  
In this mode, the output signal from the mixer is applied to the main inputs of the BEHRINGER  
ULTRALINK PRO. If the SPLIT/MIX switches are set to “SPLIT”, the mono outputs of the respective channels  
provide either the left or the right main signal. Depending on the setting of the BALANCE control, any balance  
between left and right main signal can be adjusted.  
At the same time, the main input signal is also sent to the left or right main output, so that here two additional  
splitter outputs are available. Please note that these outputs do not feature a balance routing function. The left  
main input is routed exclusively to the left main output; similarly, the right main input feeds the right main  
output only.  
6.2.1 The ULTRALINK PRO as a 4-channel stereo splitter  
For this special application, the splitter function configures the unit as a 4-channel stereo splitter. Here, the  
stereo signal source is connected to the two main inputs. If all mono channels are operated in SPLIT mode, the  
BALANCE controls of channels 1, 3, and 5 are set to “LEFT”, and the BALANCE controls of channels 2, 4, and  
6 to “RIGHT”: thus, the corresponding stereo output pairs are routed through channels 1+2, 3+4, and 5+6. This  
kind of application is particularly useful for tape duplication systems.  
6. APPLICATIONS  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
6.3 Application as a matching amplifier  
Fig. 6.3: Block diagram of the MATCHING AMPLIFIER function  
The BEHRINGER ULTRALINK PRO can also be used as a multiple matching amplifier. The task of a matching  
amplifier is to convert the level of a signal source into another level. For instance, a cassette recorder with  
home recording level (-10 dBV) can be raised to studio level (+4 dBu). Of course, this process can also be  
reversed (level attenuation).  
In this application, the ULTRALINK PRO is operated in MIX mode. The output of the signal source is connected  
to the mono input of the ULTRALINK PRO. The corresponding mono output provides the resulting output signal  
which can be raised or lowered in level. Each of the six mono channels is equipped with a LEVEL control. The  
control range is from -oo(full attenuation) to a maximum gain of +15 dB.  
14  
6. APPLICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
7. SPECIFICATIONS  
AUDIO INPUTS  
Connectors  
Type  
Impedance  
Nominal operating level  
Max. input level  
CMRR  
XLR and 1/4" TRS  
RF filtered, servo-balanced input  
50 kOhms balanced, 25 kOhms unbalanced  
-10 dBV to +4 dBu  
+21 dBu balanced and unbalanced  
Typ. 40 dB, > 55 dB @ 1 kHz  
AUDIO OUTPUTS  
Connectors  
Type  
Impedance  
Max. output level  
XLR and 1/4" TRS  
Electronically servo-balanced output stage  
60 Ohms balanced, 30 Ohms unbalanced  
+22 dBu balanced and unbalanced  
SYSTEM SPECIFICATIONS  
Frequency response  
S/N ratio  
THD  
5 Hz to 200 kHz, +/- 3 dB  
>95 dBu, unweighted, 22 Hz to 22 kHz  
0.002 % typ. @ +4 dBu, 1kHz, gain 1  
FUNCTION CONTROLS  
Main input level  
Main ouput level  
Level  
variable  
variable  
variable for each channel  
placing in the stereo field  
Balance/pan  
FUNCTION SWITCHES  
Main Link  
Split/mix  
links the main input signal to the main output  
changeover from split to mix mode for each channel  
INDICATORS  
Input level (main)  
Ouput level (main)  
Input/output level  
4-digit LED display: -24/-12/0/+6 dB  
4-digit LED display: -24/-12/0/+6 dB  
8-digit LED display: -24/-18/-12/-6/0/+6/+12/+18 dB  
POWER SUPPLY  
Mains Voltages  
USA/Canada  
U.K./Australia  
Europe  
120 V ~, 60 Hz  
240 V ~, 50 Hz  
230 V ~, 50 Hz  
General Export Model  
max. 35 Watts  
100 - 120 V ~: T 630 mA H  
200 - 240 V ~: T 315 mA H  
Standard IEC receptacle  
100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz  
Power Consumption  
Fuse  
Mains Connection  
PHYSICAL/WEIGHT  
Dimensions (H * W * D)  
Net Weight  
approx. 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm)  
approx. 3 kg  
Shipping Weight  
approx. 3.8 kg  
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be  
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or  
shown.  
7. SPECIFICATIONS  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRALINK PRO MX882  
8. WARRANTY  
§ 1 WARRANTY CARD/ONLINE REGISTRATION  
To be protected by the extended warranty, the buyer must com-  
plete and return the enclosed warranty card within 14 days of  
the date of purchase to BEHRINGER Spezielle Studiotechnik  
GmbH, in accordance with the conditions stipulated in § 3. Fail-  
ure to return the card in due time (date as per postmark) will void  
any extended warranty claims.  
3. Free inspections and maintenance/repair work are expressly  
excluded from this warranty, in particular, if caused by improper  
handling of the product by the user.  
This also applies to defects caused by normal wear and tear, in  
particular, of faders, potentiometers, keys/buttons and similar  
parts.  
Based on the conditions herein, the buyer may also choose to  
use the online registration option via the Internet  
4. Damages/defects caused by the following conditions are not  
covered by this warranty:  
s misuse, neglect or failure to operate the unit in compliance  
with the instructions given in BEHRINGER user or service  
manuals.  
§ 2 WARRANTY  
1. BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH in-  
cluding all BEHRINGER subsidiaries listed on the enclosed page,  
except BEHRINGER Japan) warrants the mechanical and elec-  
tronic components of this product to be free of defects in mate-  
rial and workmanship for a period of one (1) year from the  
original date of purchase, in accordance with the warranty regu-  
lations described below. If the product shows any defects within  
the specified warranty period that are not due to normal wear  
and tear and/or improper handling by the user, BEHRINGER shall,  
at its sole discretion, either repair or replace the product.  
s connection or operation of the unit in any way that does not  
comply with the technical or safety regulations applicable in  
the country where the product is used.  
s damages/defects caused by force majeure or any other  
condition that is beyond the control of BEHRINGER.  
5. Any repair or opening of the unit carried out by unauthorized  
personnel (user included) will void the warranty.  
6. If an inspection of the product by BEHRINGER shows that the  
defect in question is not covered by the warranty, the inspection  
costs are payable by the customer.  
2. If the warranty claim proves to be justified, the product will be  
returned to the user freight prepaid.  
3. Warranty claims other than those indicated above are ex-  
pressly excluded.  
7. Products which do not meet the terms of this warranty will be  
repaired exclusively at the buyer’s expense. BEHRINGER will  
inform the buyer of any such circumstance. If the buyer fails to  
submit a written repair order within 6 weeks after notification,  
BEHRINGER will return the unit C.O.D. with a separate invoice  
for freight and packing. Such costs will also be invoiced sepa-  
rately when the buyer has sent in a written repair order.  
§ 3 RETURN AUTHORIZATION NUMBER  
1. To obtain warranty service, the buyer (or his authorized dealer)  
must call BEHRINGER (see enclosed list) during normal business  
hours BEFORE returning the product. All inquiries must be ac-  
companied by a description of the problem. BEHRINGER will then  
issue a return authorization number.  
§ 5 WARRANTY TRANSFERABILITY  
2. Subsequently, the product must be returned in its original  
shipping carton, together with the return authorization number to  
the address indicated by BEHRINGER.  
This warranty is extended exclusively to the original buyer (cus-  
tomer of retail dealer) and is not transferable to anyone who  
may subsequently purchase this product. No other person (re-  
tail dealer, etc.) shall be entitled to give any warranty promise on  
behalf of BEHRINGER.  
3. Shipments without freight prepaid will not be accepted.  
§ 4 WARRANTY REGULATIONS  
§ 6 CLAIM FOR DAMAGES  
1. Warranty services will be furnished only if the product is  
accompanied by a copy of the original retail dealer’s invoice.  
Any product deemed eligible for repair or replacement by  
BEHRINGER under the terms of this warranty will be repaired or  
replaced within 30 days of receipt of the product at BEHRINGER.  
Failure of BEHRINGER to provide proper warranty service shall  
not entitle the buyer to claim (consequential) damages. In no  
event shall the liability of BEHRINGER exceed the invoiced value  
of the product.  
§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW  
2. If the product needs to be modified or adapted in order to  
comply with applicable technical or safety standards on a na-  
tional or local level, in any country which is not the country for  
which the product was originally developed and manufactured,  
this modification/adaptation shall not be considered a defect in  
materials or workmanship. The warranty does not cover any  
such modification/adaptation, irrespective of whether it was  
carried out properly or not. Under the terms of this warranty,  
BEHRINGER shall not be held responsible for any cost resulting  
from such a modification/adaptation.  
1. This warranty does not exclude or limit the buyer’s statutory  
rights provided by national law, in particular, any such rights  
against the seller that arise from a legally effective purchase  
contract.  
2. The warranty regulations mentioned herein are applicable  
unless they constitute an infringement of national warranty law.  
The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or  
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any  
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.  
BEHRINGER is a registered trademark.ALL RIGHTS RESERVED.  
© 2001 BEHRINGER Spezielle Studiotechnik GmbH.  
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany  
Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30  
8. WARRANTY  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Projector MP8630 User Manual
Acnodes Laptop PC 5152 User Manual
Allied Telesis Clothes Dryer 395 User Manual
Altec Lansing MP3 Docking Station IMV712 User Manual
American Audio Musical Instrument CK 800Mp3 User Manual
Atlona Riding Toy AT DVI15SRS User Manual
Atmel Switch AT91 User Manual
Axis Communications Security Camera Q6044 C User Manual
Axis Communications Server 250S User Manual
Axor Plumbing Product 10135001 User Manual