Behringer DJ Equipment ZMX8210 User Manual

User Manual  
A50-17433-00002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRAZONE ZMX8210  
ULTRAZONE  
Professional 8-Channel 3-Bus Mic/Line Zone Mixer with Remote Control and Link Ports  
= Ultra-flexible and easy-to-use zone mixer with remote control ports for commercial sound systems and  
fixed installation applications  
= 6 ultra-low noise Mic/Line inputs with Gain control, -20 dB Pad, Level/Clip indicator,  
+48 V phantom power and bus-assign switches  
= 2 selectable high-headroom stereo inputs with mono/stereo switch  
= Channel 1 provides variable threshold to enable automatic bus mute for announcements, etc.  
= 3 assignable outputs (Left, Right and Aux) with individual Master controls and 5-segment LED meters  
= Ultra-musical 4-band master EQ and global microphone low-cut filter for perfect sound adjustment  
= Left, Right, Aux and Mute bus links available including Master/Slave switch for connecting multiple  
units  
= Remote master Left/Right level control port for ultimate flexibility  
= Select switch for routing microphone bus post remote control  
= Integrated channel muting system with Priority select  
= All inputs/outputs on Euro-type connectors  
= High-quality components and exceptionally rugged construction ensure long life  
= Conceived and designed by BEHRINGER Germany  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRAZONE ZMX8210  
Foreword  
Table of contents  
Dear Customer,  
Welcome to the team of  
ULTRAZONE users, and  
thank you very much for  
expressing your confi-  
dence in BEHRINGER  
by purchasing this rack  
mixer.  
Writing this foreword  
for you gives me great  
pleasure because it rep-  
resents the culmination  
of many months of hard  
work delivered by engi-  
neering team to achieve  
a very ambitious goal:  
to present an outstand-  
ing rack mixer whose  
amazing functions offer  
a maximum on flexibility  
and performance. The  
task of designing our new  
ZMX8210 certainly meant a great deal of responsibility, which  
we assumed on you, the discerning user and musician. Meeting  
your expectations also meant a lot of work and night shifts. But it  
was fun, too. Developing a product usually brings a lot of people  
together, and what a great feeling it is when all who participated  
in such a project can be proud of what they've achieved.  
It is our philosophy to share our enjoyment with you, because you  
are the most important member of the BEHRINGER team. With  
your highly competent suggestions for new products you've made  
a significant contribution to shaping our company and making it  
successful. In return, we guarantee you uncompromising quality  
as well as excellent technical and audio properties at an extremely  
reasonable price.All of this will let you give free rein to your creativ-  
ity without being hampered by budget constraints.  
We are often asked how we manage to produce such high-quality  
equipment at such unbelievably low prices. The answer is quite  
simple: it's you, our customers! Many satisfied customers mean  
large sales volumes enabling us to get better purchasing terms for  
components, etc. Isn't it only fair to pass these benefits on to you?  
Because we know that your success is our success too!  
I would like to thank all of you who have made the ULTRAZONE  
possible. You have made all your own personal contributions, from  
the developers and the many other employees at this company to  
you, the BEHRINGER user.  
My friends, it's been worth the effort!  
Thank you very much,  
Uli Behringer  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRAZONE ZMX8210  
1.1.3 Online registration  
1. Introduction  
PleaseremembertoregisteryournewBEHRINGERequipmentright  
warranty carefully.  
Thank you for purchasing the ULTRAZONE ZMX8210. The  
ZMX8210 is a professional rack mixer which is especially suitable  
for fixed installation applications and allows public address to be  
directed to up to three zones (rooms). The eight input channels  
process Line and Microphone signals. Further inputs are added  
by connecting a second ZMX8210. All channels have high-quality  
preamplifiers to ensure the highest level of sound quality. The  
input signals can flexibly be routed to three output buses as well  
as effectively be processed with the integrated 4-band equalizer.  
Several functions of the ZMX8210 can be controlled remotely by  
using simple control elements. Thanks to its intuitive control panel,  
the unit can also be employed by inexperienced users after a short  
while unlike conventional mixers.  
Should your BEHRINGER product malfunction, our goal is to have  
it repaired as quickly as possible. Please contact the retailer from  
whom the equipment was purchased. Should your BEHRINGER  
dealer not be located in your vicinity, you may directly contact  
one of our subsidiaries. Corresponding contact information is  
included in the original equipment packaging (Global Contact  
Information/European Contact Information). Should your country  
not be listed, please contact the distributor nearest you. A list of  
distributors can be found in the support area of our website (www.  
behringer.com/support).  
The ZMX8210 gives you full control in no time to direct public  
address into every setting .  
Registering your purchase and equipment with us helps us process  
your repair claims quicker and more efficiently.  
Have fun with your new mixer.  
1.1 Before getting started  
1.1.1 Shipment  
Thank you for your cooperation!  
2. Controls and connectors  
2.1 Front panel  
The controls of channels 1 – 6 and 7 – 8 are largely identical as  
well as the controls of the LEFT, RIGHT andAUX buses. Channels  
1 and 7 plus the LEFT bus are described exemplarily.  
Your ZMX8210 was carefully packed at the factory, and the  
packaging was designed to protect the unit from rough handling.  
Nevertheless, we recommend that you carefully examine the  
packaging and its contents for any signs of physical damage that  
may have occurred during transit.  
Pressing the switch controls, unless otherwise noted, activates the  
described functions, but are deactivated when not pressed.  
+
If the unit is damaged, please do NOT return it to BEH-  
RINGER. Instead, notify your dealer and the shipping  
company immediately. Otherwise, claims for damage  
or replacement may not be honored.  
+
+
+
Always use the original packing carton to prevent dam-  
age during storage or transport.  
Make sure that no children are left unsupervised with  
the unit or its packaging.  
Please ensure proper disposal of all packing materi-  
als.  
Fig. 2.1: Controls of the ZMX8210  
1.1.2 Initial operation  
Channels 1 – 6  
Be sure that there is enough space around the unit for cooling.  
To avoid overheating, please do not place the ZMX8210 near  
radiators and other equipment emanating heat.  
{1} PAD: The switch attenuates the input level of loud signal  
sources by 20 dB.  
{2} +48 V: The switch activates the phantom power for capaci-  
+
Blown fuses must be replaced by fuses of the same type  
and rating! The correct value is specified in “Specifica-  
tions.” Unplug the unit before replacing the fuse!  
tor microphones.  
{3} L, R, AUX: The three switches route the channel signals to  
one or more output buses.  
The mains connection is made using the enclosed power cord and  
a standard IEC receptacle. It meets all of the international safety  
certification requirements.  
{4} THRESH (only Channel 1): The knob selects the level at  
which the signal is muted. When the level of the input signal  
exceeds the specified value, the signal of channels 2 – 8 on  
the LEFT/RIGHT bus is muted. Apply the Mute function to  
fade out music signals as soon as a microphone on channel  
1 is talked into.  
+
Please make sure that all units have a proper ground  
connection. For your own safety, never remove or dis-  
able the ground conductor from the unit or of the AC  
power cord. The unit shall always be connected to the  
mains socket outlet with a protective ground connec-  
tion.  
{5} LEVEL: This knob adjusts the preamplification and the level  
with which the input signal is sent to the selected buses.  
{6} LEDs: The LEDs show the input levels. When the CLIP  
LED lights up, the input level needs to be attenuated by  
using the LEVEL knob {5} to prevent clipping. In case the  
attenuation is insufficient, use PAD switch {1} to attenuate  
the signal further.  
+
+
Please ensure that only qualified people install and  
operate the unit. During installation and operation,  
the user must have sufficient electrical contact to the  
ground, otherwise electrostatic discharges might affect  
the operation of the unit.  
Channels 7 – 8  
The sound quality may diminish within the range of pow-  
erful broadcasting stations and high-frequency sources.  
Increase the distance between the transmitter and the  
device and use shielded cables for all connections.  
{7} MONO: This switch selects the configuration of the stereo  
channels:  
= In mono mode (switch pressed), the channel's L/R  
inputs are mixed together and sent to the LEFT, RIGHT  
and AUX buses. In this way, a mono signal is sent to all  
output buses at the same time.  
Controls and connectors  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ULTRAZONE ZMX8210  
= In stereo mode (switch not pressed), the signal of the  
L input is sent to the LEFT bus, the R input is sent to  
the RIGHT bus and a mixed L/R signal is sent to the  
AUX bus.  
+
+
To disconnect the unit from the mains, please pull the  
mains plug. When using the unit, make sure that the  
mains plug is readily accessible. When using the unit  
mounted in a rack, please make sure that you can easily  
disconnect the unit from the mains by using a plug or a  
circuit breaker on the backside.  
{8} LEDs: These have the same function as the control {6}. In  
stereo mode, the LEDs show the summed level of the input  
signals L and R.  
Please note: The POWER switch does not entirely dis-  
connect the unit from the mains when turned off. For  
this reason, disconnect the cable from the mains plug  
when the unit is not used for a long period.  
{9} LEVEL: This has the same function as the control {5}. In  
stereo mode, the control adjusts the volume level of the  
L/R signal.  
[10] CH SELECT: This switch is used either to activate channel  
7 or 8. The active channel is indicated by the glowing of the  
corresponding LED.  
SERIAL NUMBER: The serial number is found on the rear panel.  
It is required for online registration.  
2.2 Rear panel  
The BUS LINKS connector as well as the channel inputs 7 and 8  
are unbalanced. The other PCB inputs and outputs are balanced.  
To use balanced connectors for unbalanced connections, insert  
a jumper wire between the ground pin (m) and the negative pin  
(-).  
Fig. 2.2: Controls of the ZMX8210  
Main section  
Fig. 2.3: Connections of the ZMX8210  
[11] MIC LOW CUT: This switch cuts low-frequency rumble  
[19] FUSEHOLDER/IEC power receptacle: The connection to the  
mains is established through an IEC connector. It meets all  
of the international safety certification requirements.Atting  
power cord is included. When replacing the fuse, you need  
to use the same type.  
below 100 Hz  
[12] MICMIX:Thisswitchremovesthesignalofchannels1–6from  
the remote control function, allowing only the output volume of  
channels 7/8 on the LEFT/RIGHTbus to be remote controlled.  
When the switch is not pressed, the total volume of all chan-  
nels fed to the LEFT/RIGHT bus are remote controlled.  
+
Before you change the fuse, switch off the device and  
pull the plug to avoid electric shock or damage to the  
device.  
[13] RIGHT MUTE: This switch excludes the RIGHT bus from  
the Mute function. This is helpful when using the RIGHT and  
LEFT buses for different zones (rooms).  
[20] REMOTE:This connector is used for connecting components  
to remote control the ZMX8210.  
= When the switch is pressed, the signal of channels 1 – 8,  
which is dependent on the signal level of channel 1, is  
muted on both the LEFT and RIGHT bus. This occurs  
when the input level of channel 1 drops below the speci-  
fied threshold value (THRESH {4}).  
= It is possible to connect a simple potentiometer to remote  
control the volume of the LEFT and RIGHT buses (see  
Chapter 3.1.3).  
= Connect a push-button switch and two control diodes to  
remote control the CH SELECT switch {10} of channels  
7 and 8 (see Chapter 3.1.3).  
= When the switch is not pressed, only the LEFT bus  
is muted while the RIGHT bus continues to transmit  
a signal, provided the individual channels have been  
routed accordingly.  
[21] BUS LINKS: Use this connector to link two ZMX8210s  
together to provide additional inputs (signals). The three  
output buses LEFT/RIGHT/AUX are linked together using  
the connector. The mute signal of the ZMX8210 which is set  
to be the master is also transmitted so that the mute function  
of the master is also able to mute the buses of the slave.  
[14] EQ ON: The switch activates the equalizer [15] for the LEFT  
and RIGHT bus.  
[15] LOW/LOW MID/HIGH MID/HIGH: This knob adjusts the  
boost/cut of factory-preset frequencies as follows:  
[22] SLAVE/MASTER: The switch places the ZMX8210 in the  
= LOW: This boosts/cuts frequencies below 70 Hz by a  
master or slave mode of operation.  
maximum of ±15 dB.  
When the switch  
= LOW MID: This boosts/cuts frequencies around 300 Hz  
by a maximum of ±15 dB.  
= is pressed, the ZMX8210 is placed in the slave mode  
of operation.  
= HIGH MID: This boosts/cuts frequencies around 3 kHz  
by a maximum of ±15 dB.  
= is not pressed, the ZMX8210 is placed in the master  
mode of operation.  
= HIGH: This boosts/cuts frequencies above 10 kHz by a  
maximum of ±15 dB.  
+
+
The ZMX8210 needs to be used in master mode when  
no additional units are connected!  
Buses  
[16] LEDs: When the CLIP LED lights up, attenuate the output  
level by using the LEVEL knob [17] to avoid clipping.  
When more than one ZMX8210 are connected, only one  
unit is allowed to be in master mode. The other units  
need to be placed in the slave mode of operation.  
[17] LEVEL: This knob adjusts the output level of the bus outputs  
OUT L, OUT R and AUX.  
[23] AUX/OUT R/OUT L: Balanced signal outputs for busesAUX,  
RIGHT and LEFT.  
Mains  
[18] POWER: The POWER switch powers up the mixer. The  
POWER switch should be in the Off position when connecting  
the unit to the mains.  
6
Controls and connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ULTRAZONE ZMX8210  
In case you need to use further signals, simply link to units to-  
gether. The ZMX8210 can handle line-level sources, dynamic  
microphones and phantom-powered capacitor microphones as  
input signals.  
3.1 Examples of application  
In comparison to conventional rack mixers, the ZMX8210 offers  
several advantages for fixed installations and PA equipment that  
is being used by laymen. With the Euro-type connectors and the  
easy usability, the ZMX8210 optimally fulfills the requirements of  
these kind of applications.  
Fig. 2.4: Connections of the ZMX8210  
[24] INPUTS 7 – 8: Unbalanced signal inputs for channels 7 – 8.  
The connections are RCA connectors.  
[25] INPUTS 1 – 6: Balanced signal inputs for channels 1 – 6.  
3.1.1 Directing public address to up to three zones  
The following application example shows a typical cabling of three  
zones in mono mode. Distribute the signal to zones 1 – 3 by using  
the routing switches (L, R, AUX) of the particular input channel.  
Instead of three independent mono zones, it is also possible to  
have one stereo zone (LEFT / RIGHT bus) and one mono zone  
(AUX bus).  
3. Application  
The ZMX8210 is a user-friendly rack mixer which is principally  
used for fixed installations to direct public address in different  
zones or facilities, such as cafés, practices and houses of wor-  
ship. With one unit, you can provide a maximum of three zones  
with different signals.  
Fig. 3.1: Example of using three zones  
3.1.2 Using multiple ZMX8210s  
3.1.3 Remote control of the ZMX8210  
In case the eight input channels of the ZMX8210 are not enough,  
you can link two units together by using the BUS LINKS connec-  
tors. The output buses of the two units are connected by routing  
the input signals of both units to the output buses. This gives you  
additional inputs.  
The ZMX8210 provides a 5-pin REMOTE connector to remote  
control  
= the volume level of the LEFT and RIGHT buses.  
= channel selection of channels 7 and 8.  
The remote control can be realized by using simple compo-  
nents.  
The output signal can be on both units. To use two units together,  
please complete the following steps:  
Volume level of the LEFT and RIGHT buses  
1) Set one unit to master mode and the second to slave mode  
by using the SLAVE/MASTER switch [22].  
To be able to remote control the volume level of the LEFT and  
RIGHT buses, you need a potentiometer. Use a  
2) Using a shielded, 4-pin conductor cable to connect the BUS  
LINKS connector of the MASTER unit to the corresponding  
connector of the SLAVE unit.  
= 10 kΩ potentiometer to achieve a maximum attenuation of  
30 dB.  
= 100 kΩ potentiometer to achieve a maximum attenuation of  
60 dB.  
Application  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ULTRAZONE ZMX8210  
Connect the potentiometer to pins V and SHD. Connect the mid  
tap to pin C (see Fig. 3.2).  
3.2 Basic operation  
Using the ZMX8210 is easy to learn and is very similar to using a  
standard mixer. Complete the following steps:  
1) Hook up the unit as described in Chapter 3.1.  
2) Adjust the LEFT, RIGHT andAUX LEVEL knobs [17] to center  
position and turn the LEVEL knobs {5} of each channel fully  
to the left.  
3) Turn on the ZMX8210 and the other devices you want to use  
(amplifier and loudspeakers last).  
4) Apply an audio signal (line or microphone signal) to an input  
channel.  
5) Press the +48 V push-button switch {2} in case you want to  
use a capacitor microphone.  
6) Press the push-button switches L, R and AUX {3} to select  
the buses to which the input signals are sent.  
7) Turn the LEVEL knob of the corresponding channel to the  
right until  
= you have reached the required volume level  
= or the 0 db LED glows continuously.  
Volume potentiometer  
Fig. 3.2: Remote volume control  
connection with potentiometer  
If the CLIP LED lights up, you need to adjust the level by slowly  
turning the knob to the left. For especially strong input signals, use  
the PAD push-button switch {1} to attenuate the signal further.  
Alternatively, you can control the volume by using a positive con-  
trol voltage of max. 11 V DC. The voltage needs to be inserted  
between the pins SHD and C.  
8) Repeat steps 4 to 7 with additional signal sources. Use chan-  
nels 7 or 8 for stereo signal sources.  
9) In case you are using a microphone, press the MIC LOW CUT  
push-button switch [11] to reduce low-frequency rumble such  
as subsonic noise.  
+
When using a voltage source to remote control the vol-  
ume level, make sure that the control voltage does not  
exceed 11 V DC or else your unit could be damaged.  
10) Press the EQ ON push-button switch [14] and adjust the LOW,  
LOW MID, HIGH MID and HIGH knobs of the equalizer section  
(15) to modify the sound.  
Selecting stereo channels 7 and 8  
To select the stereo channels 7 and 8, you need a push-button  
switch and optionally two LEDs.  
11) Use the LEVEL knobs of the LEFT, RIGHT and AUX buses  
[17] to adjust the volume level of the OUT L, OUT R and AUX  
outputs (zones).  
Connect the push-button switch to pins SHD and SEL. You can  
add two LEDs to indicate the selected channel. They have to be  
connected in parallel with a reverse polarity between the pins IND  
and SHD (see Fig. 3.3).  
4. Installation  
4.1 Rack mounting  
The unit requires the height of 1 U to fit within a 19" rack. Please  
make sure to provide approximately 4" of space for the connec-  
tors on the rear panel. Please use M6 rack screws and nuts when  
rack-mounting the unit.  
4.2 Audio connections  
The ZMX8210 connections are Euro-type connectors. You require  
special PCB connectors for the cabling. You can purchase the  
connectors at well-assorted electronics retailers. The ZMX8210  
connectors' pin assignment is printed on the rear panel of the unit.  
Alternatively, refer to the following diagrams.  
Control LED CH 8  
INPUTS / AUX / OUT R / OUT L  
Channel select switch  
Control LED CH 7  
Fig. 3.3: Connection with push-button switch and two LEDs for  
channel selection  
Fig. 4.1: Pin assignment of the INPUTS connectors  
8
Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ULTRAZONE ZMX8210  
Fig. 4.2: Pin assignment of the output bus connectors  
+:  
-:  
Signal (positive / balanced)  
Signal (negative / balanced)  
Ground  
m:  
Use all three pins for a balanced connection.  
For an unbalanced connection, use pins m and + and insert a  
jumper wire between pins m and -.  
BUS LINKS  
Fig. 4.3: Pin assignment of the BUS LINKS connector  
M:  
M(UTE) bus signal link  
A:  
A(UX) bus signal link (unbalanced)  
SH(IEL)D signal link (shield)  
SHD:  
R:  
R(IGHT) bus signal link (unbalanced)  
L(EFT) bus signal link (unbalanced)  
L:  
REMOTE  
Fig. 4.4: Pin assignment of the REMOTE connector  
V:  
V(OLUME) connection to the potentiometer  
(potential)  
C:  
C(ONTROL) connection to the potentiometer  
(mid tap)  
SHD:  
SH(IEL)D connection  
(shield)  
SEL:  
SEL(ECT) connection to the push-button switch  
IND(ICATOR) connection to the LEDs  
IND:  
Installation  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ULTRAZONE ZMX8210  
5. Specifications  
INPUTS 1 – 6  
Type  
Euro-type connector, electronically balanced  
Impedance  
3 kΩ balanced, 1.5 kΩ unbalanced (with PAD)  
+ 12 dBu (with PAD)  
Max. input level  
Max. gain  
40 dB  
Crosstalk  
> 63 dB @ 1 kHz  
Common-mode rejection ratio (CMRR)  
Equivalent input noise (EIN)  
INPUTS 7 – 8  
Type  
> 75 dB @ 1 kHz, 22 Hz – 22 kHz  
-116 dBu A-weighted; terminated with 150 Ω  
RCA connectors, unbalanced  
10 kΩ, unbalanced  
+ 15 dBu  
Impedance  
Max. input level  
Max. gain  
15 dB  
OUT L, OUT R, AUX  
Type  
Euro-type connector, balanced  
22 dB  
Max. gain  
Max. gain (input/output)  
Impedance  
62 dB (without PAD)  
60 Ω, unbalanced, 120 Ω, balanced  
+ 21 dBu unbalanced/balanced  
> 63 dB @ 1 kHz  
Max. output level  
Crosstalk (output/output)  
Noise (all level controls down)  
Signal-to-noise ratio  
BUS LINKS  
-105 dBu A-weighted  
87 dB @ 0 dB A-weighted  
Type  
Euro-type connector, unbalanced  
approx. 150 Ω  
Impedance  
Max. output level  
REMOTE  
+ 21 dBu  
Type  
Euro-type connector  
30 dB attenuation with 10 kΩ potentiometer (not  
included)  
Volume control  
60 dB attenuation with 100 kΩ potentiometer (not  
included)  
Channel select 7/8  
EQ  
Push-button switch (1 pin) required (not included)  
MIC LOW CUT  
LOW  
High-pass filter; Cutoff frequency: 100 Hz  
± 15 dB @ 70 Hz  
LOW MID  
± 15 dB @ 300 Hz  
HIGH MID  
± 15 dB @ 3 kHz  
HIGH  
± 15 dB @ 10 kHz  
SYSTEM SPECIFICATIONS  
Frequency response  
Distortion (THD+N)  
POWER SUPPLY  
Power consumption  
20 Hz – 22 kHz ± 0.5 dB  
< 0.05 %  
max. 25 W  
T 630 mA H 250 V  
(100 – 120 V ~, 50/60 Hz)  
T 315 mA H 250 V  
Fuse  
(220 – 230 V ~, 50/60 Hz)  
DIMENSIONS/WEIGHT  
Dimensions  
approx. 1 3/4" x 19" x 8 1/2" (approx. 44.5 mm x 482.6 mm x  
217 mm)  
Weight  
approx. 4.9 lb. (2.2 kg)  
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products  
without prior notice. Specifications and appearance may differ from those listed or illustrated.  
10  
Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ULTRAZONE ZMX8210  
2. If the product needs to be modified or adapted in order to comply with  
applicable technical or safety standards on a national or local level, in  
any country which is not the country for which the product was originally  
developed and manufactured, this modification/adaptation shall not be  
considered a defect in materials or workmanship. The warranty does  
not cover any such modification/adaptation, irrespective of whether  
it was carried out properly or not. Under the terms of this warranty,  
BEHRINGER shall not be held responsible for any cost resulting from  
such a modification/adaptation.  
6. Warranty  
§ 1 Other warranty rights  
and national law  
1. This warranty does not exclude or limit the buyer’s statutory rights  
provided by national law, in particular, any such rights against the seller  
that arise from a legally effective purchase contract.  
2. The warranty regulations mentioned herein are applicable unless they  
constitute an infringement of national warranty law.  
3. Free inspections and maintenance/repair work are expressly excluded  
from this warranty, in particular, if caused by improper handling of the  
product by the user. This also applies to defects caused by normal wear  
and tear, in particular, of faders, crossfaders, potentiometers, keys/but-  
tons, tubes, guitar strings, illuminants and similar parts.  
§ 2 Online registration  
Please do remember to register your new BEHRINGER equipment right  
afteryourpurchasebyvisitingwww.behringer.com(alternativelywww.beh-  
ringer.de)andkindlyreadthetermsandconditionsofourwarrantycarefully.  
Registering your purchase and equipment with us helps us process  
your repair claims quicker and more efficiently.  
4. Damage/defects caused by the following conditions are not covered  
by this warranty:  
= improper handling, neglect or failure to operate the unit in compli-  
ance with the instructions given in BEHRINGER user or service  
manuals;  
Thank you for your cooperation!  
§ 3 Warranty  
= connection or operation of the unit in any way that does not comply  
with the technical or safety regulations applicable in the country  
where the product is used;  
1. BEHRINGER (BEHRINGER International GmbH including all BEH-  
RINGER subsidiaries, except BEHRINGER Japan) warrants the  
mechanical and electronic components of this product to be free of  
defects in material and workmanship for a period of one (1) year1 from  
the original date of purchase, in accordance with the warranty regulations  
described below. If the product shows any defects within the specified  
warranty period that are not excluded from this warranty as described  
under § 5, BEHRINGER shall, at its discretion, either replace or repair  
the product using suitable new or reconditioned parts. In the case that  
other parts are used which constitute an improvement, BEHRINGER  
may, at its discretion, charge the customer for the additional cost of  
these parts.  
= damage/defects caused by force majeure or any other condition  
that is beyond the control of BEHRINGER.  
5. Any repair or opening of the unit carried out by unauthorized personnel  
(user included) will void the warranty.  
6. If an inspection of the product by BEHRINGER shows that the defect  
in question is not covered by the warranty, the inspection costs are  
payable by the customer.  
7. Products which do not meet the terms of this warranty will be repaired  
exclusively at the buyer’s expense. BEHRINGER will inform the buyer of  
any such circumstance. If the buyer fails to submit a written repair order  
within 6 weeks after notification, BEHRINGER will return the unit C.O.D.  
with a separate invoice for freight and packing. Such costs will also be  
invoiced separately when the buyer has sent in a written repair order.  
2. If the warranty claim proves to be justified, the product will be returned  
to the user freight prepaid.  
3. Warranty claims other than those indicated above are expressly  
excluded.  
§ 6 Warranty transferability  
§ 4 Return authorization number  
This warranty is extended exclusively to the original buyer (customer of  
retail dealer) and is not transferable to anyone who may subsequently  
purchase this product. No other person (retail dealer, etc.) shall be  
entitled to give any warranty promise on behalf of BEHRINGER.  
1. To obtain warranty service, the buyer (or his authorized dealer) must  
call BEHRINGER during normal business hours BEFORE returning  
the product. All inquiries must be accompanied by a description of the  
problem. BEHRINGER will then issue a return authorization number.  
2. Subsequently, the product must be returned in its original shipping  
carton, together with the return authorization number to the address  
indicated by BEHRINGER.  
§ 7 Claim for damage  
Failure of BEHRINGER to provide proper warranty service shall not  
entitle the buyer to claim (consequential) damages. In no event shall the  
liability of BEHRINGER exceed the invoiced value of the product.  
3. Shipments without freight prepaid will not be accepted.  
§ 5 Warranty regulations  
1. Warranty services will be furnished only if the product is accompanied  
by a copy of the original retail dealer’s invoice. Any product deemed  
eligible for repair or replacement under the terms of this warranty will  
be repaired or replaced.  
1
Customers in the European Union please contact BEHRINGER Germany Support  
for further details.  
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability  
for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications  
may vary slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to  
bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or  
mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH.  
ALL RIGHTS RESERVED. (c) 2008 BEHRINGER International GmbH.  
BEHRINGER International GmbH,  
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Muenchheide II, Germany.  
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903  
Warranty  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION  
ULTRAZONE  
ZMX8210  
Responsible party name:  
BEHRINGER USA, Inc.  
Address:  
18912 North Creek Parkway, Suite 200  
Bothell, WA 98011, USA  
Phone/Fax No.:  
Phone: +1 425 672 0816,  
Fax: +1 425 673 7647  
hereby declares that the product(s)  
ULTRAZONE ZMX8210  
complies/comply with the FCC rules as mentioned in the following paragraph:  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
= Reorient or relocate the receiving antenna.  
= Increase the separation between the equipment and receiver.  
= Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
= Consult the dealer or an experienced radio/TV technician for help.  
Important information:  
Changes or modifications to the equipment not expressly approved by  
BEHRINGER USA can void the user’s authority to use the equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

4XEM Home Security System IPCAMW40 User Manual
ABC Office Paper Shredder 802CC User Manual
ADTRAN Air Conditioner 610200094 User Manual
Audiovox Automobile Alarm PRO 9644 User Manual
Audiovox Remote Starter 128 8210 User Manual
Audiovox Speaker CE208BT User Manual
Axxess Interface Automobile Parts OESWC 8113 STK User Manual
BB Electronics Switch ETHUB16 User Manual
Behringer Car Speaker B215XL B215XL WH User Manual
Beko Ice Maker TL 546 APS User Manual