Barco Network Router 3 User Manual

ClickShare  
User Guide  
R5900001/03  
21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changes  
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war-  
ranties or merchantability and tness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the  
program(s) described in this publication at any time without notice.  
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this  
publication; these changes are incorporated in new editions of this publication.  
The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the secured Barco web site  
Copyright ©  
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or  
stored in a retrieval system without the prior written consent of Barco.  
Barco ClickShare End-User License Agreement (EULA/Software License)  
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING SOFTWARE OR HARDWARE  
PROVIDED TO YOU BY BARCO AS IT CONTAINS THE TERMS AND CONDITIONS BY WHICH BARCO OFFERS TO LICENSE THE  
SOFTWARE. BY OPENING THE SOFTWARE PACKAGE, OR USING THE HARDWARE IN WHICH THE SOFTWARE IS EMBEDDED,  
YOU AGREE TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT.  
The Software as supplied by BARCO is licensed, not sold to you, on a non-exclusive basis for use only under the terms of this license,  
and BARCO reserve all rights not expressly granted to you. You may own the carrier on which the Software is provided, but the Software  
is owned and copyrighted by BARCO or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights  
in the Software or its documentation.  
By installing, executing and/or using the Software, either as initial version or as an upgrade, update, patch or enhancement of a prior  
release, this Software License shall supersede any terms and conditions previously agreed upon (whether or not in writing) between Barco  
and you with respect to the subject matter of this Software License and such previous terms shall from the date hereof cease to have any  
force or effect; provided, however that this Software License shall not be construed as a renunciation, discharge or waiver of any right or  
remedy provided in any terms and conditions previously agreed upon with respect to a failure of either party to perform any of its obligations  
under any terms and conditions previously agreed upon.  
Software Specications  
The Software contains the following software products: ClickShare  
Software License Terms  
1. This Software License is between you and BARCO NV, a corporation organized and existing under the laws of Belgium registered  
under number BE 0473.191.041, Commercial Companies’ Register of Kortrijk, having its registered ofce President Kennedypark, 35  
at B-8500 Kortrijk, Belgium ("Barco") for the use of the Software.  
You hereby undertake to inform all users authorized by you to make use of the computing device on which the Software is loaded/in-  
stalled (“Authorized Users”) of the terms of this Software License and to bind all Authorized Users to accept all such terms of this  
Software License as applies to them.  
2. Barco grants you a limited, non-exclusive, non-assignable, non-transferable user license (without the right to grant sublicenses).  
Unless specically agreed upon otherwise between you and Barco or unless specically allowed by the Software (or its DRM man-  
agement) itself, i) the license under this Software License applies to one (1) copy of the Software to be used on one single computing  
device and ii) installation on a computing device that may be concurrently accessed by more than one user shall not constitute a  
permitted use and a separate license is required for each active user connected to a computing device on which the Software is being  
used.  
You and Authorized Users are entitled to use the Software for the purposes and in the manner set out in this Software License (and  
documentation), but neither you nor any Authorized User are entitled to: (i) sell or grant a security interest in the Software to other  
parties in any way, or to rent, lease or sub-license the Software to others without the express prior written consent of Barco; or (ii)  
exploit the Software or any of its component parts for any commercial purpose, other than use by you and/or Authorized Users of the  
Software.  
Neither you nor any Authorized User may, whether in whole or in part, copy, translate, reverse engineer, derive source code from,  
modify, disassemble, decompile, create derivative works based on the Software, or remove any proprietary notices or labels on the  
Software, save as may be permitted by law or this Software License, without the prior consent, in writing, of Barco.  
3. Barco (and Barco’s licensors, as appropriate) retain ownership of all intellectual property rights in the Software and any copies you  
or any Authorized User may make of such Software. The Software is protected by national copyright laws, international copyright  
treaties and conventions, and other applicable laws. All rights not expressly licensed to you in this Software License are reserved  
to Barco and Barco’s licensors, as appropriate. The Software contains certain other licensed materials and Barco’s licensors may  
protect their rights in the event of any violation of this Software License.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Barco shall hold you harmless, defend and indemnify you from and against direct damages, losses and expenses arising from in-  
fringement or alleged infringement of any patent, trademark or copyright of such third party by the license and the right to install the  
Software as permitted by this Software License and settle at its sole expense any amounts awarded in a nal judgment or settlement  
resulting therefrom, under the condition that (i) you promptly notify Barco in writing after a claim has been asserted against you or  
the commencement of any claim, action, suit or proceeding (whichever is the earlier), and (ii) Barco shall be allowed to assume sole  
control of the defense and any settlement negotiations related to any claim, action, suit or proceeding, and (iii) you shall not negotiate,  
settle or compromise any claim, action, suit or proceeding without the prior written consent of Barco and (iv) you, at your cost, shall  
cooperate with Barco and provide assistance and support, as may reasonably be required by Barco, in connection with the defense  
and any settlement negotiations related to any claim, action, suit or proceeding. Barco shall have no indemnity obligation for any  
Software, or any portion thereof, (i) that is based on specications, drawings, models or other data furnished by you or, (ii) that is  
not provided by Barco or, (iii) that is modied, in spite of the prohibition for you to modify the software or, (iv) to the extent that you  
continue allegedly infringing activity after having been provided modications that avoid the alleged infringement, or (v) where the use  
of the Software, or the combination or thereof with other Software, processes or materials or the distribution thereof rather than the  
Software itself is the primary cause of an alleged infringement. In case it has been determined by a nally awarded judgment that  
Barco infringed or misappropriated such third party rights or earlier, at Barco’s discretion, it may, at its option and cost, (i) modify the  
Software in such a way that it shall not infringe upon or misappropriate the rights of the third party or (ii) obtain for you a license or  
other right to use the rights allegedly infringed or (iii) replace the Software in question with non-infringing Software. The remedies set  
forth in this paragraph shall constitute your sole and exclusive remedy and Barco’s sole and exclusive liability for a third party claim  
that the Software infringes or misappropriates any intellectual property right of a third party.  
5. The duration of this Software License will be from the date of your acceptance (as set forth above) of the Software (whereby you ac-  
knowledge that use of the Software implies acceptance), with no termination date, unless otherwise specied. You may terminate this  
Software License at any time by destroying all copies of the Software then in your possession and returning all associated materials  
and documentation, to Barco or the appointed Barco reseller that sold or provided these to you. Barco may terminate this Software  
License forthwith by informing you at any time if you and/or any Authorized User are in breach of any of the Software License’s terms.  
6. YOU UNDERSTAND THAT THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS". BARCO DOES NOT MAKE NOR INTENDS  
TO MAKE ANY WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS ALL IMPLIED  
WARRANTIES OF MERCHANTABILITY FITNESS, FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF INTELLEC-  
TUAL PROPERTY AND DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE FROM ERRORS OR THAT SUCH ERRORS  
WILL BE CORRECTED BY BARCO AND YOU ARE SOLELY RESPONSIBLE FOR ALL COSTS AND EXPENSES ASSOCIATED  
WITH RECTIFICATION, REPAIR OR DAMAGE CAUSED BY SUCH ERRORS.  
YOU ALSO ACKNOWLEDGE AND AGREE THAT:  
BARCO ACCEPTS NO LIABILITY FOR ANY DAMAGES, LOSSES OR CLAIMS YOU OR ANY THIRD PARTY MAY SUFFER AS  
A RESULT OF YOUR USE OF THE SOFTWARE. IN JURISIDCTIONS WHERE BARCO’S LIABILITY CANNOT BE EXCLUDED,  
BARCO’S LIABILITY FOR DIRECT DAMAGES SHALL BE LIMITED TO AN AMOUNT OF 250 EURO IN THE AGREGATE (OR TO  
THE MAXIMUM EXTENT PERMITTED BY LAW WHERE NO FURTHER EXCLUSION IS LEGALLY ALLOWED).  
TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL BARCO BE LIABLE FOR ANY INDIRECT, SPECIAL,  
PUNITIVE, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES OF ANY KIND WHICH MAY ARISE OUT OF OR IN CON-  
NECTION WITH THE SOFTWARE, THIS SOFTWARE LICENSE OR THE PERFORMANCE OR PURPORTED PERFORMANCE  
OF OR FAILURE IN THE PERFORMANCE OF BARCO’S OBLIGATIONS UNDER THIS SOFTWARE LICENSE OR FOR ANY ECO-  
NOMIC LOSS, LOSS OF BUSINESS, CONTRACTS, DATA, GOODWILL, PROFITS, TURNOVER, REVENUE, REPUTATION OR  
ANY LOSS ARISING FROM WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OF THE SOFTWARE AND ANY AND  
ALL OTHER COMMERCIAL DAMAGES OR LOSSES WHICH MAY ARISE IN RESPECT OF USE OF THE SOFTWARE, EVEN IF  
BARCO HAS BEEN ADVISED OF THE POSSIBILITY OF THEIR OCCURRENCE.  
YOU HEREBY AGREE TO INDEMNIFY, KEEP INDEMNIFIED, DEFEND AND HOLD HARMLESS BARCO AND BARCO’S AFFILI-  
ATES AND SUBSIDIARIES FROM AND AGAINST ANY AND ALL ACTIONS, PROCEEDINGS, LIABILITY, LOSS, DAMAGES, FEES  
AND COSTS (INCLUDING ATTORNEYS" FEES), AND OTHER EXPENSES INCURRED OR SUFFERED BY BARCO ARISING OUT  
OF OR IN CONNECTION WITH ANY BREACH BY YOU OF THE TERMS OF THIS SOFTWARE LICENSE.  
7. You shall treat as condential all information obtained from the other pursuant to this Software License which is marked "condential"  
or the equivalent or has the necessary quality of condence about it and shall not divulge such information to any persons without  
Barco’s prior written consent provided that this Paragraph 7 shall not extend to information which was rightfully in the possession of  
you prior to the commencement of the negotiations leading to this Software License, which is already public knowledge or becomes  
so at a future date (otherwise than as a result of a breach of this paragraph 7), is required to be disclosed by law or which is trivial or  
obvious. You are aware of and ensure to comply with the provisions of this paragraph 7. The foregoing obligations as to condentiality  
shall survive any termination of this Software License.  
8. You will remain responsible for the maintenance of your hardware, operating system, the functioning of your network and in keeping  
your systems virus-free. You acknowledge that the Software is a complex computer software application, and that the performance  
thereof may vary depending hardware platform, software interactions and conguration. You acknowledge that the Software is not  
designed and produced specically to meet your specic requirements and expectations and the selection of the Software by you is  
entirely your own choice and decision. For the avoidance of doubt, nothing in this Software License shall impose any obligation on  
Barco to provide support services (on the Software or any other hardware or software product).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. This Software License is the only understanding and agreement between you and Barco for use of the Software by you and/or Autho-  
rized Users. The Software License supersedes all other communications, understandings or agreements we had prior to this Software  
License (with the exception of any continuing condentiality agreement) although nothing in this Software License purports to exclude  
liability for fraudulent misrepresentation. You may not export or re-export the Software or any copy or adaptation in violation of any  
applicable laws or regulations. This Software License shall not be altered, amended or varied. If any provision of this Software Li-  
cense is determined to be illegal, void or unenforceable, or if any court of competent jurisdiction in any nal decision so determines,  
this Software License shall continue in full force save that such provision shall be deemed to be deleted with effect from the date of  
such decision, or such earlier date, and shall be replaced by a provision which is acceptable by law and which embodies the intention  
of this Software License a close as possible.  
10. You acknowledge that this Software may be subject to U.S. or other governments Export Jurisdiction. You agree to comply with all  
applicable international and national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as  
end-user, end-use, and destination restrictions issued by the U.S. or other governments.  
11. Barco shall be entitled to sub-contract all or any of Barco’s obligations hereunder to a third party and/or any of Barco’s afliated  
companies.  
12. The construction, validity and performance of this Software License shall be governed in all respects by the laws of Belgium without  
recourse to its conict of law principles. All disputes arising in any way out of or affecting this Software License shall be subject  
to the exclusive jurisdiction of the courts of Kortrijk, without prejudice to enforcement of any judgment or order thereof in any other  
jurisdiction. The United Nations Convention on Contracts for the International Sale of Goods (the "Convention") shall not apply to this  
Software License, however, if the Convention is deemed by a court of competent jurisdiction to apply to this Software License, Barco  
shall not be liable for any claimed non-conformance of the Software under Article 35(2) of the Convention.  
Trademarks Software License Terms  
Brand and product names mentioned in relation to the Software may be trademarks, registered trademarks or copyrights of their respective  
(third party) holders. All such brand and product names mentioned in relation to the Software serve as comments or examples and are not  
to be understood as advertising for the products or their manufacturers.  
Privacy Policy  
You acknowledge and agree that the Software is gathering technical information about the functionality of the products which are connected  
through the Software (“Functional Information”) and that Barco may make use of such Functional Information (with the exclusion of any  
personal data) for any reason Barco sees t, including but not limited to providing services to you / your organization, allowing third party  
to access to such Functional Information and/or to provide services to you / your organization .  
You hereby explicitly give consent that Barco may gather, access, preserve, and/or disclose the personal data you provide to us (e.g.  
connected with your account allowing for the gathering of Functional Information as well as any content associated with that account) as  
well as personal information we receive from you through the use of the Software:  
For the benet of the business purposes of Barco and/or its afliates;  
In order to provide, maintain, protect and/or improve the Software and to develop new software;  
For administration of the relationship between you, your organization and Barco and/or its afliates ;  
For any other legitimate purpose (including i) direct marketing purposes from Barco, its afliates or selected third parties, and ii)  
allowing third parties to provide services to you related to the Software);  
if required to do so by law or in a good faith belief that such access preservation or disclosure is reasonably necessary to:  
-
-
-
-
Satisfy any applicable law, regulation, legal process or enforceable governmental request;  
Enforce this Software License, including investigation of potential violations hereof;  
Detect, prevent, or otherwise address fraud, security or technical issues (including, without limitation, the ltering of spam);  
Protect against imminent harm to the rights, property or safety of Barco, its users or the public as required or permitted by law.  
Barco shall not process any “sensitive information” whatsoever, including but not limited to medical information.  
You understand that the technical processing and transmission of or by the Software, including your content, may involve:  
Transmissions over various networks;  
Changes to conform and adapt to technical requirements of connecting networks, devices and/or services.  
You hereby explicitly give consent that Barco may export your personal data to any country worldwide, especially to any country where  
Barco and/or its afliates have infrastructure, or where a third party is making available infrastructure to Barco and/or its afliates, to process  
personal data.  
Barco fully adheres to the EU Directive 95/46/EC on the protection of individuals with regard to the processing of personal data and the  
free movement of such data, as implemented in the local EU member states. In accordance with these regulations, you have a right of  
access to, and rectication of, your personal data. You may exercise these rights by contacting Barco.  
Open Source Software provisions:  
This product contains software components released under an Open Source license. A copy of the source code is available on request  
by contacting your Barco customer support representative.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION ARE PROVIDED "AS IS" WITH-  
OUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTOR  
BE LIABLE FOR DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POS-  
SIBILITY OF SUCH DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIA-  
BILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCE  
SOFTWARE. MORE INFORMATION/DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.  
Copyright on each Open Source Software component belongs to the respective initial copyright holder, each additional contributor and/or  
their respective assignee(s), as may be identied in the respective documentation, source code, README le, or otherwise. You shall not  
remove or obscure or otherwise alter the respective copyrights.  
You acknowledge living up to the conditions of each separate Open Source Software license.  
In the development of the Software, the following Open Source Software components have been used (an updated list may be made  
available through the (customer section of the) Barco website or other (online) means):  
Open Source component  
Open Source License  
alsa-lib  
alsa-utils  
busybox  
dropbear  
fakeroot  
linux  
gmp  
iproute2  
kobs-ng  
rsync (<3.0.0)  
rsync (>=3.0.0)  
uClibc  
wireless_tools  
wpa_supplicant  
imx-bootlets  
Crypto++  
libresample  
libjpeg-turbo  
acpid  
avahi  
crda  
cron  
http://opensource.org/licenses/ISC  
http://opensource.org/licenses/ISC  
dbus  
http://opensource.org/licenses/ISC  
dhcpd  
dmidecode  
e2fsprogs  
eglibc  
ethtool  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Open Source component  
gdbserver  
grub  
Open Source License  
gstreamer  
hdparm  
hostapd  
i2c-tools  
iftop  
iperf  
iptables  
iw  
acl  
attr  
libav  
libcap2  
libdaemon0  
libdrm2  
http://opensource.org/licenses/MIT  
libexpat1  
libfontcong1  
libfontenc1  
freetype  
http://opensource.org/licenses/MIT  
http://freetype.sourceforge.net/FTL.TXT  
libgcc1  
libgcrypt11  
libglib-2  
libgnutls26  
libgpg-error0  
BSD like licensee  
libjpeg8  
libnl2  
libnss-mdns  
libpam  
libpcap  
libpcre0  
libpixman-1-0  
0ubuntu1/libpixman-1-0.copyright  
libpng12-0  
libpopt0  
libsm6  
http://opensource.org/licenses/MIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Open Source component  
libstdc++6  
libtalloc2  
Open Source License  
http://opensource.org/licenses/MIT  
libusb  
libxml2  
libz1  
Free license  
lighttpd  
lmsensors  
logrotate  
makedevs  
memtest86plus  
mesa  
http://opensource.org/licenses/MIT  
module-init-tools  
modutils  
monit  
ncurses  
http://opensource.org/licenses/MIT  
netbase  
openssh-sftp-server  
openssl  
opkg  
pciutils  
perl  
php  
procps  
Free license  
read-edid  
rgb  
rockbox-imxtools  
rsyslog  
splashutils  
strace  
sysfsutils  
sysvinit  
tcpdump  
ttf-arphic-uming  
ttf-dejavu-common  
ttf-dejavu-sans-mono  
ttf-dejavu-sans  
ttf-sazanami-gothic  
ttf-sazanami-mincho  
ttf-un-fonts  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Open Source component  
udev  
Open Source License  
update-modules  
update-rc  
usbutils  
util-linux-ng  
server-xorg  
http://opensource.org/licenses/MIT  
zeroconf  
Trademarks  
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.  
All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for  
the products or their manufacturers.  
Guarantee and Compensation  
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser  
must immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barco  
must be informed immediately in writing of any complaints.  
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning,  
at latest 30 days after the transfer of risks. In the event of justied notice of complaint, Barco can repair the fault or provide a replacement  
at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a  
reduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or  
indirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a component  
of the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of properties  
guaranteed in writing or due to the intent or gross negligence or part of Barco.  
If the purchaser or a third party carries out modications or repairs on goods delivered by Barco, or if the goods are handled incorrectly,  
in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to inuences not  
agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are  
system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as  
well as normal maintenance are not subject to the guarantee provided by Barco either.  
The environmental conditions as well as the servicing and maintenance regulations specied in the this manual must be complied with by  
the customer.  
EN55022/CISPR22 Class A ITE (Information Technology Equipment)  
Class A ITE is a category of all other ITE which satises the class A ITE limits but not the class B ITE limits. Such equipment should not  
be restricted in its sale but the following warning shall be included in the instructions for use:  
Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be  
required to take adequate measures.  
Federal Communication Commission Interference Statement  
You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s  
authority to operate the equipment.  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with  
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely  
to cause harmful interference in which case the user will be required to correct the interference at his own expense.  
If this equipment does cause interference with radio communications services, which can be determined by turning the equipment off and  
on, you are encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1. this device may not cause harmful interference, and  
2. this device must accept any interference received, including interference that may cause undesired operation of the device.  
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a devices operating in the  
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite  
Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GHz band)  
are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not  
violate federal regulations to protect Mobile Satellite Services.  
Base Unit FFC ID: RYK-WPEA-121N  
Button FCC ID: 2AAED-CLSBTN  
Compliance Anatel (Brasil)  
1. Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução nº 242/2000, e atende  
aos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção especíca referente a campos elétricos,  
magnéticos e eletromagnéticos de radiofreqüência de acordo com as resoluções nº 303/2002 e 533/2009. Para maiores informações,  
consulte o site da Anatel - www.anatel.gov.br  
2. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações  
do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.  
Canada, Industry Canada (IC) Notices  
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this  
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired  
operation of the device.  
Radio Frequency (RF) Exposure Information  
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco  
Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.  
Base Unit IC ID: IC: 4104 A-AR5BHB116  
Button IC ID: 9393B-CLSBTN  
IC Antenna statement  
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain  
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should  
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.  
This radio transmitter 4104 A-AR5BHB116 has been approved by Industry Canada to operate with the antenna types listed below with  
the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list,  
having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.  
Type: Dipole  
Maximum Peak Gain: 2 dBi  
Impedance: 50 Ohm  
Canada, avis d’lndustry Canada (IC)  
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est  
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout  
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.  
Informations concernant l’exposition aux fréquences radio (RF)  
La puissance de sortie émise par l’appareil de sans l Barco est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada  
(IC). Utilisez l’appareil de sans l Barco de façon à minimiser les contacts humains lors du fonctionnement normal.  
IC ID Unité de Base: 4104 A-AR5BHB116  
IC ID Button : 9393B-CLSBTN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Déclaration d’antenne d’Industrie Canada (IC)  
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain  
maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique  
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente  
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.  
Le présent émetteur radio 4104 A-AR5BHB116 a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés  
ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans  
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.  
Type: Dipole  
Gain maximum: 2 dBi  
Impédance: 50 Ohm  
NCC Statement  
第十二條  
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特  
性及功能。  
第十四條  
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得  
繼續使用。前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療  
用電波輻射性電機設備之干擾。  
底座 CCAF11LP0930T5  
按鈕 CCAJ13LP1890T2  
KCC Statement  
기본 장치  
등록번호 KCC-RMM-BVY-CLICKBASE  
기자재의 명칭 : 무선데이터통신시스템용 무선기기  
모델명 : CLICKSHARE-BASE  
본 기기는 내부에 인증 받은 무선모듈(인증번호 : ATH-AR5BHB116)을 내장하고 있음  
본 기기와 20 cm 이상 떨어져서 사용하시기 바랍니다  
등록번호 KCC-CRM-BVY-CLICKBUTTON  
버튼  
기자재의 명칭 : 특정소출력 무선기기(무선데이터통신시스템용 무선기기)  
모델명 : CLICKSHARE-BUTTON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
TABLE OF CONTENTS  
R5900001 CLICKSHARE 21/11/2013  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
2
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Introduction  
1. INTRODUCTION  
Overview  
1.1 Versions  
Regional versions  
Depending on the location where you buy the ClickShare product, the Base Unit and accessories are regionalized. By the time of  
release of this manual, 4 regional versions of ClickShare are available:  
Europe  
North America  
China  
Japan  
The regional version of your ClickShare cannot be changed. That means that you cannot use it in another  
region.  
For more information on the regional variants, refer to the ClickShare Installation Guide (R5900004).  
1.2 About this guide  
This manual  
Partnumber  
Description  
Level  
R5900001  
User Guide  
User  
Available System documentation  
This guide is part of the documentation set describing the ClickShare product.  
Guide  
Article number  
R5900001  
R5900002  
R5900004  
R5900005  
R5900006  
R5900007  
R5900008  
R5900009  
User Guide  
Quick Start Guide  
Installation Guide  
Safety Guide  
Service Guide  
Button Guide  
Rack Mount Guide  
Recycling Manual  
A printed copy of the Safety Guide and Quick Start Guide is included in the ClickShare box at purchase. Please check online for  
the other documents.  
Always check for the latest version of the manual on www.barco.com/clickshare Click on Visit the ClickShare  
product page and go to tab Downloads..  
R5900001 CLICKSHARE 21/11/2013  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
1. Introduction  
Depending on the ClickShare version, some graphics might be different to the ones used in this manual. This  
however does not have any effect to the functionality.  
The User Guide describes how to use ClickShare. It also contains a basic troubleshooting part where you can search for a solution  
when a problem occurs.  
1.3 Symbols and fonts  
Symbol overview  
The following icons are used in the manual :  
Caution  
Warning  
Info, term denition. General info about the term  
Note: gives extra information about the described subject  
Tip: gives extra advice about the described subject  
Font overview  
Buttons are indicated in bold, e.g. OK.  
Menu items are indicated in italic.  
Step related notes, tips, warnings or cautions are printed in italic.  
Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon.  
4
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. Introduction to ClickShare  
2. INTRODUCTION TO CLICKSHARE  
Overview  
2.1 About the ClickShare product  
ClickShare sets  
ClickShare makes connecting to the meeting room’s video system a matter of clicking a Button. This one click wonder not only  
helps the presenter get the presentation on-screen in a second, but it also allows the other people in the meeting to participate more  
actively. The result is enhanced meeting efciency and better decision-making.  
At the moment 4 different sets are available on the market. Each set is sold in its specic region and it can only be used in that  
specic region.  
Components ClickShare set  
A standard ClickShare set consists of a Base Unit, a Tray and 4 Buttons. Depending on the location where you buy the product, the  
software of the Base Unit is different. If needed, you can buy additional Buttons and Trays.  
1
3
2
Image 2-1  
ClickShare main components  
1
2
3
Base unit  
Button  
Tray  
Accessories included  
Depending on the country where you buy the product, the following regionalized accessories are also included in the ClickShare  
box.  
Regional version  
Contains  
Accessories included  
R9861005EU  
R9861006BEU  
power cables CEE7 and BS 1363  
wall/ceiling mounting brackets  
a DVI to VGA converter  
4x R9861006D01  
R9861006T01  
R5900001 CLICKSHARE 21/11/2013  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2. Introduction to ClickShare  
Regional version  
Contains  
Accessories included  
R9861005JP  
R9861006BJP  
power cable JIS C8303  
wall/ceiling mounting brackets  
a DVI to VGA converter  
4x R9861006D01  
R9861006T01  
R9861005CN  
R9861005NA  
R9861005WW  
R9861006BCN  
4x R9861006D01  
R9861006T01  
power cable GB 2099  
wall/ceiling mounting brackets  
a DVI to VGA converter  
R9861006BNA  
4x R9861006D01  
R9861006T01  
power cable NEMA 5/15  
wall/ceiling mounting brackets  
a DVI to VGA converter  
R9861006BEU  
4x R9861006D01  
R9861006T01  
power cables CEE7 and BS 1363  
wall/ceiling mounting brackets  
a DVI to VGA converter  
Contact your local sales representative for the correct regional variant to be used in your country.  
Optional accessory: ClickShare Link  
Order number: R9861001  
Image 2-2  
ClickShare Link  
Using the optional ClickShare Link allows you to use your iPad with ClickShare.  
Via a cable or wireless via Apple TV, the complete content of your iPad touchscreen is transferred to the meeting room screen  
A ClickShare Link kit contains:  
1 ClickShare Link unit  
1 DVI to HDMI convertor  
1 power adapter  
4 power clips  
1 USB cable  
2.2 About the Base Unit  
Base Unit functionality  
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the sound of  
the meeting room’s audio system.  
The Base Unit can be inside a cabinet in the meeting room, or put on the meeting room table or mounted on a wall or ceiling. Check  
the Installation Guide for instructions on how to install the Base Unit.  
6
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. Introduction to ClickShare  
2
1
3
2
Image 2-3  
The Base Unit  
1
2
USB port  
Status LED strip  
Standby Button  
3
Table 2-3  
USB Port  
The USB port is used to update the software of both the Base Unit and the Buttons.  
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the software  
and rmware of the Button is up to date. If not, the Base Unit updates the software and/or rmware.  
Status LED strips  
The color of the LEDs at the front of the Base Unit give information on the status of the system.  
LEDs behavior  
Explanation  
static red  
receiving content from the Buttons and streaming towards the display.  
pairing and software update of the Button is done. You can now unplug the  
Button from the Base Unit.  
during the rst phase of the Base Unit boot process.  
blinking white  
system is starting up (during the second phase)  
Button pairing is in progress  
software update of the Base Unit  
slow blinking white  
static white  
standby mode (i.e. muting the display output)  
awake and ready (i.e. showing the welcome message on the display)  
pairing is done  
red blinking  
an error occurred  
Standby button  
The button at the front of the Base Unit has a power on/off function and a standby function.  
When the system is awake, a short push triggers the system to go into standby mode.  
When the system is in standby mode, a short push triggers the system to wake up.  
When the system is powered on, a long push makes the system to shut down and power off.  
When the system is shut down, a long push or short push triggers the system to start up.  
R5900001 CLICKSHARE 21/11/2013  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Introduction to ClickShare  
2.3 About the Button  
Button functionality  
By default, the ClickShare Set comes with four Buttons. A Button contains three main functional components.  
1
2
3
Image 2-4  
The Button  
1
2
USB connector  
Button  
3
LED ring  
Table 2-5  
Handle the Button cable with care. Rough handling might cause defects.  
USB connector  
Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or in the Base Unit (for pairing the Button  
to the Unit or updating its software).  
Button  
Click the Button to display the content of the laptop’s screen on the meeting room display. Clicking the Button during the meeting  
will toggle the sharing of the screen.  
Holding the Button for 2 seconds brings the content of the laptop’s screen as full screen on the meeting screen, removing other  
sources currently displayed.  
LED ring  
The LED ring indicates the current status of your ClickShare.  
LEDs behavior  
Explanation  
white blinking  
the Button is plugged in the laptop and initializing or waiting for the user  
to start the ClickShare application.  
pairing/software update of the Button in the Base Unit is in progress.  
static white  
static red  
ClickShare is ready to start sharing your screen.  
pairing is done. You can now unplug the Button from the Base Unit.  
sharing your screen with the display.  
pairing and software update is done. You can now unplug the Button  
from the Base Unit.  
red blinking  
off (no light)  
an error occurred.  
the Button is not or not properly inserted into the USB port.  
the Button might be defective.  
the USB port or computer might be defective.  
8
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. Introduction to ClickShare  
2.4 About the Tray  
Tray functionality  
The function of the Tray is to hold the Buttons on the table when the meeting has nished. The Tray can hold up to 4 Buttons.  
Image 2-5  
Tray  
2.5 Mobile Device Support  
Overview  
The below list of Apps are supported by ClickShare and can be installed on your mobile device from Google Play or Apple App Store.  
Before you can use your mobile device with ClickShare, you have to connect the mobile device Wi-Fi with the ClickShare Base Unit  
Wi-Fi. Follow the instructions as given in your mobile device user guide.  
App  
Used on  
Logo  
ClickShare Presenter  
Android and iOS  
MirrorOp Sender for Galaxy  
Samsung Galaxy only  
R5900001 CLICKSHARE 21/11/2013  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2. Introduction to ClickShare  
10  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
3. GETTING STARTED  
Overview  
3.1 Powering the Base Unit on and off  
About power mode  
You can power on and off the Base Unit and bring the system in standby mode. In standby mode the system mutes the output signal  
to the display. If your display supports this, it will automatically enter power saving mode.  
To power on the Base Unit or awake it from standby  
1. When the Base Unit is shut down, set the rocker switch at the back of the Base Unit to “I”.  
Refer to image 3-1.  
Image 3-1  
Rocker switch  
2. If the system does not start up automatically, push the standby button shortly.  
Refer to image 3-2.  
R5900001 CLICKSHARE 21/11/2013  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
3. Getting Started  
Image 3-2  
Standby button  
The system is now powered on.  
To put the Base Unit in standby mode or awake it  
1. Push the standby button shortly.  
Refer to image 3-2.  
Note: If you plug in a Button into your laptop and connect to it, the Base Unit automatically wakes up from standby (enable its  
display output).  
If no Buttons have been connected to it for some time, the Base Unit can automatically enter standby mode.  
To shut down the Base Unit  
The Base Unit can be shut down in two ways :  
1. Push the standby button until the Base Unit shuts down.  
Refer to image 3-2.  
2. Set the rocker switch at the back of the Base Unit to “0”.  
Refer to image 3-1.  
3.2 Basic Use  
Basic functionality  
When entering a meeting room equipped with ClickShare and if the display is not in power saving mode, the ClickShare wallpaper  
is shown on the display. The content of the wallpaper depends on the setup.  
12  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3. Getting Started  
Image 3-3  
Starting to use ClickShare is now very simple.  
To start using ClickShare  
1. Take a Button out of the Tray.  
Image 3-4  
2. Insert the Button into a USB port of your laptop.  
R5900001 CLICKSHARE 21/11/2013  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
Image 3-5  
The LEDs of the Button start ashing white.  
On your laptop a new drive appears.  
Two situation are possible now:  
-
A launcher is preinstalled on your laptop (downloaded from the Base Unit or Barco website, or deployed company-wide by  
your IT department). ClickShare is immediately available. You can continue with step 5.  
-
nothing is pre-installed. Continue with step 3.  
3. Browse to and double-click the ClickShare drive on your laptop.  
Image 3-7  
MAC environment  
Image 3-6  
Windows environment  
4. Double-click the ClickShare application.  
14  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Getting Started  
The ClickShare client software starts and its icon appears in the system tray.  
On a Windows computer:  
On a Macintosh:  
When the system is ready for use, a message appears close to the systray icon.  
Image 3-8  
The LEDs of the Button are static white.  
5. To share your screen on the display, click the Button.  
The LEDs of the Button become static red and your screen appears on the display. When audio is enabled on the ClickShare  
Base Unit, the audio of your laptop is also available on the audio output of the Base Unit and it will be played via the meeting  
room audio system. The icon return to the same state as in step 4.  
In the system tray, the ClickShare icon starts rotating. On Windows computers the icon changes into  
.
The name of the user logged on to the laptop which is sharing its content is briey shown in the bottom left corner of the added  
content.  
ClickShare automatically scales the content of your screen to the resolution of the meeting room display. The aspect ratio of your  
screen is maintained to make sure the proportions are correct.  
6. To remove your content from the display, click the Button again.  
The LEDs of the Button become static white.  
7. When leaving the meeting room, unplug the Button from your laptop and put it back in the Tray.  
No trace of the ClickShare application is left on your laptop.  
3.3 Advanced Use  
Advanced functionality  
ClickShare can show the content of up to four wireless sources or three wireless sources and one ClickShare Link (for an iPad) on  
the meeting room display(s) at the same time. A wireless source is a ClickShare Button, or either an iPad or android device sharing  
via the ClickShare app. This means by clicking their Button, clicking the virtual button in the ClickShare app or connecting an iOS  
device through the ClickShare Link, four persons in the meeting room can display their screens simultaneously. They appear as  
follows:  
For a meeting room with a single display:  
1
2
1
3
2
4
1
1
2
3
4 users  
2 users  
3 users  
1 user  
Image 3-9  
Position on single display  
For a meeting room with a dual display:  
R5900001 CLICKSHARE 21/11/2013  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3. Getting Started  
1
2
1
1
1
2
2
3
1 user  
3 users  
3
4
1
2 users  
4 users  
Image 3-10  
Position on Dual screen  
One display must support Display Port, otherwise an adapter piece from display port to DVI must be used.  
For a single display 2560x1080 Panoramic setup  
1
1 user panoramic setup  
1
2
1
2
3
4
2 users panoramic setup  
4 users panoramic setup  
Image 3-11  
For Panoramic projectors which require Dual Link DVI in, use the Barco kit B5606021 to convert DisplayPort into Dual Link DVI.  
Image 3-12  
DisplayPort convertor  
If you are the fth user who wants to share his screen, you are blocked. A message appears on your screen telling you the maximum  
number of users being displayed simultaneously has been reached. You can decide to wait until one of the four users removes his  
content from the display or you can decide to show your content full screen. In that case, the four screens that were being displayed  
are removed and your screen is displayed full screen.  
To show your content on the display full screen  
1. Click and hold the Button for 2 seconds.  
16  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
Your content is shown full screen on the display. If other persons were sharing their content on the display, their screens are  
removed. Their Button’s LEDs are now shining white again.  
1
3
2
4
5
4 users  
user 5  
Image 3-13  
Single display  
1
2
3
4
5
5
4 users  
user 5  
Image 3-14  
Dual display  
1
2
3
4
5
Image 3-15  
Panoramic display  
When you click again, your content is removed and the Base Unit shows the welcome screen again. The  
content of the previous users is not restored on the display.  
3.4 Use of an iOS device with ClickShare Link  
About using an iOS device with ClickShare Link  
The content of the iOS device touchscreen can be displayed on the large meeting room display(s) as one of the possible sources.  
The optional ClickShare Link must be installed in the meeting room before an iOS device can participate by sharing its screen con-  
tent. For more information about the physical installation of ClickShare Link in combination with an iOS device, consult ClickShare’s  
installation guide (R5900004)  
Necessary parts  
a ClickShare Link  
an HDMI cable  
optional: an iOS device HDMI adapter or an Apple TV  
Connection with cable  
1. Connect the iOS device HDMI convertor to your iOS device.  
2. Connect the ClickShare Link to the power and to a rear USB port of the Base Unit.  
3. Connect the HDMI port of the iOS device to the input of the ClickShare Link.  
The content of the screen will be displayed on the meeting room screen.  
R5900001 CLICKSHARE 21/11/2013  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Getting Started  
Connection via Apple TV  
As per the above but connect the ClickShare Link input to the Apple TV instead of the iOS device.  
1. Connect to the appropriate network and start sharing by enabling AirPlay mirroring. For more information on how to setup, consult  
the iOS device’s user guide.  
Note: Always use AirPlay mirroring. Streaming is not supported.  
3.5 User Interface  
User Interface functionality  
After launching the client, the ClickShare icon appears in the system tray.  
ClickShare context menu  
The content of the context menu is related to the operating system.  
1. Right-click the ClickShare icon in the system tray.  
The context menu appears.  
Image 3-16  
Context menu  
2. From the list, click the action you want to perform.  
Click  
To  
Result  
Start sharing  
Show me fullscreen  
to show your screen on the display.  
The LEDs of your Button become red.  
to bring the content of your screen on  
the display full screen.  
The screens of other users that were  
shown on the display disappear.  
Capture mode  
to choose to capture video with more  
(slower performance) or less detail  
(faster performance).  
Tune video performance and quality  
Shared desktop (only for Windows7 and to select primary or extended desktop  
Windows8)  
Depending on the selection the primary  
or the extended display is displayed.  
About ClickShare Client  
to nd out the ClickShare software  
Here you can nd more information on  
version.  
the ClickShare software version.  
Exit  
to close ClickShare.  
The ClickShare icon disappears from  
the system tray and the LEDs of the  
Button start blinking white.  
3.6 Capture mode  
Only for Windows XP and Windows 7.  
About capture mode  
ClickShare is optimized for optimum video performance. Upon starting the client software it will disable Win7 Aero Glass to maximize  
video performance. Upon quitting the ClickShare applications your Aero Glass settings will be restored.  
Transparent alpha layers on WinXP and Win7 are by default not captured. Therefore some windows may not be shown or may  
appear different on screen. For example content of video players using overlays will not be shown.  
With "Capture More" selected, Win7 Aero Glass settings will be restored and capturing of alpha layers is enabled. In this mode,  
video throughput may decrease a bit and more details will be captured.  
Default setting: Not checked.  
18  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
3. Getting Started  
How to change  
1. Right click on the ClickShare icon in the system tray (1).  
Image 3-17  
Change capture mode  
A context menu opens.  
2. Click Capture mode to toggle.  
Checked: capture with more details but may have a lower performance.  
Not checked: capture will be faster but may lose some of the details  
3.7 Shared desktop: primary - extended  
Only for Window7 and Windows8  
About shared desktop  
Depending on your selection, your primary screen or your extended screen will be captured and displayed via ClickShare. That  
extended screen can be a physical screen or a virtual screen.  
With extended desktop you can take advantage of both your laptop screen and the central meeting room display. Presentation notes  
or other material on primary screen will not be displayed to everyone.  
PC with virtual extended screen:  
2
1
Image 3-18  
Primary screen displayed on the PC, extended screen displayed on the meeting room display.  
R5900001 CLICKSHARE 21/11/2013  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Getting Started  
2
2 2  
1
Image 3-19  
PC with one extended screen connected. That extended screen will be captured and displayed on the meeting room display.  
3
2
2
1
Image 3-20  
PC with two extended screens connected. The rst extended screen, screen 2 will always be captured and displayed on the meeting  
room display.  
To know if your system supports the extended desk top feature, press Window key + P. It should bring up the  
following pop-up on screen:  
Image 3-21  
How to select  
1. Right click on the ClickShare icon in the system tray (1).  
20  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
Image 3-22  
Shared desktop selection  
A context menu opens.  
2. Select Shared Desktop (2).  
3. Select the desired setting (3).  
Primary : the primary PC screen is displayed on the meeting room display.  
Extended always the secondary screen is displayed on the meeting room display.  
Known issue  
Virtual Extended Desktop not supported on some Windows7 and Windows8 systems due to a problem in recent versions of the  
AMD graphical driver. Downgrade to an older version of the driver might resolve the issue.  
3.8 Audio conguration  
Audio conguration  
The audio signals from the different users are mixed in the Base Unit to one output signal. Each connected user must control his  
own audio signal using the audio conguration of his computer. If he does not want to broadcast his audio signal, he has to mute  
audio on his computer.  
For some operating system, it is necessary to set ClickShare as your default output device. Once you unplug the Button, the default  
setting is switched back to the previous setting.  
Set ClickShare as default in Windows 7  
1. Right click on the speaker icon in the system tray (1).  
R5900001 CLICKSHARE 21/11/2013  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Getting Started  
Image 3-23  
Speakers ClickShare, default  
2. Click Playback devices (2).  
The Sound window opens on the Playback tab.  
3. Select Speakers ClickShare (3) and click Set default (4).  
4. Click Apply or OK to activate the new setting.  
Set ClickShare as default in Windows XP  
1. Right click on the speaker icon in the system tray.  
Image 3-24  
Speakers ClickShare, default  
22  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
2. Click Adjust Audio Properties (1).  
The Sound and Audio Devices Properties window opens.  
3. Select Audio tab (2).  
4. Click on the drop down box in the Sound playback pane and select ClickShare (3)..  
5. Click Apply or OK to activate the new setting.  
Set ClickShare as default on MAC  
1. Click on the Apple logo on the menu bar (1) and select System Preferences.. ..(2).  
Image 3-25  
Speakers ClickShare, default  
2. Click on the Speaker icon (3).  
The Sound window opens.  
3. Select the Output tab (4) and activate ClickShare (5).  
3.9 Pairing  
Pairing of the Buttons with the Base Unit  
To be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing. By default, the four  
Buttons delivered with the ClickShare set are already paired to the specic Base Unit.  
In case you buy additional Buttons or when a Button should be assigned to another Base Unit, the Button needs to be paired (again).  
When updating the Base Unit software, it is advised to also pair your Buttons with the Base Unit to update their software.  
R5900001 CLICKSHARE 21/11/2013  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Getting Started  
A Button can only be paired to one Base Unit at a time.  
The Button will always make connection to the Base Unit it was last paired to.  
To pair a Button to the Base Unit  
1. Insert the Button in the USB port at the front of the Base Unit you are using.  
Image 3-26  
Inserting Button into the Base Unit  
Both the LEDs of the Button and the LEDs of the Base Unit are blinking white. This means pairing is in progress.  
The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Button  
software. This may take more time.  
During the pairing and update process, a message is displayed on the screen: “Pairing and updating Button. Busy pairing and  
updating”  
Image 3-27  
Pairing message  
The result of the pairing process can be as follows:  
-
When the LEDs become static white, the Button is paired to the Base Unit, but no software update was needed. You can  
unplug the Button from the Base Unit.  
-
When the LEDs become static red, the Button is paired to the Base Unit and the software update has nished. You can unplug  
the Button from the Base Unit.  
Image 3-28  
Pairing nished  
2. Unplug the Button from the Base Unit.  
24  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
Image 3-29  
Unplug Button from Base Unit  
The Button is now ready for use.  
R5900001 CLICKSHARE 21/11/2013  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Getting Started  
26  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Troubleshooting  
4. TROUBLESHOOTING  
4.1 Basic Troubleshooting  
Problem solving  
In this chapter some problems that might occur while using ClickShare are listed. For each problem possible causes are given and  
a solution is proposed. If you cannot solve the problem yourself, please contact your local IT administrator.  
Problem  
Cause  
Solution  
Your screen is not shown on the display  
when pressing the Button.  
You are the fth person that wants to  
share his content to the display. Only  
Click and hold the Button to use the Show  
me full screen function of ClickShare.  
four screens can appear simultaneously. Refer to "Advanced Use", page 15.  
A message appears on your computer.  
The ClickShare client software is not  
running.  
Go to the ClickShare drive and run the  
software.  
Your screen is shown, but your audio is  
not playing on the meeting room audio  
system  
Your audio signal on your PC is muted  
Right click on the speaker icon and switch  
off the mute.  
Audio on the Base Unit is disabled.  
You or an administrator should change  
the corresponding setting via the web  
interface.  
Audio system of the meeting room is not Switch on the audio system of the  
switched on meeting room.  
When using separate audio, audio cable Check audio connection between the  
is not connected.  
Base Unit (audio out, green connector)  
and the audio system of the meeting  
room.  
Default speaker is not correctly set .  
With a Button inserted, set ClickShare  
speaker as your default speaker.  
Audio Functionality is not enabled in the Enable Audio Functionality in the Base  
Base Unit.  
Unit’s web interface and re-pair the  
dongles.  
Buttons are not re-paired after changing  
the audio setting on the web interface  
Re-pair the buttons.  
Your content is removed from the display Connection to the display has been lost.  
and the LEDs of your Button are blinking  
white.  
ClickShare tries to restore the connection  
automatically. If this fails, the LEDs of  
the Button start blinking red. You should  
unplug the Button from your laptop and  
start a new.  
Nothing is shown on the display at all.  
The display is switched off.  
Wrong input is selected.  
Switch on the display.  
Select the correct input.  
The display cable is not connected  
(correctly).  
(Re)insert the display cable to the display  
and the Base Unit.  
The display does not recognize or is  
not able to display the Base Unit output  
resolution.  
You or an administrator should change  
the corresponding setting via the web  
interface.  
The Base Unit is in standby mode.  
Briey push the standby button on the  
Base Unit or plug in a Button and run the  
ClickShare client software.  
The Base Unit is powered off.  
The Button’s software is not compatible  
with that of the Base unit  
Re-pair and update the software of the  
Button by inserting it in the front USB port  
of Base Unit.  
Two laptops connected with the Base  
Unit in a dual display meeting room but  
only one shows an image  
One of the displays is switched off  
One display cable is not connected  
Switch on the display.  
(Re)insert the display cable to the display  
and the Base Unit.  
R5900001 CLICKSHARE 21/11/2013  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4. Troubleshooting  
Problem  
Cause  
Solution  
After inserting the Button into your laptop, No automatic refresh of drives.  
Refresh the view on your laptop.  
you cannot nd the ClickShare drive.  
Bad connection at USB port on laptop.  
Reconnect to the USB port.  
Try another USB port.  
Reboot your laptop.  
Windows tries to assign the ClickShare  
drive to an already reserved drive letter  
Use Microsoft Windows Disk  
Management to assign it to a free  
drive letter.  
Some programs of Windows are not  
shown on the display.  
Use of overlays, 3D or hardware  
acceleration in the GPU.  
Disable overlays or hardware  
acceleration in the GPU.  
Disable AeroGlass in Windows 7  
Capture mode  
28  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Environmental information  
5. ENVIRONMENTAL INFORMATION  
5.1 Disposal information  
Disposal Information  
Waste Electrical and Electronic Equipment  
This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste from electrical and  
electronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment by  
handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possible  
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste  
and recycle them responsibly to promote the sustainable reuse of material resources.  
For more information about recycling of this product, please contact your local city ofce or your municipal waste disposal service.  
For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee  
Disposal of batteries in the product  
This product contains batteries covered by the Directive 2006/66/EC which must be collected and disposed of separately  
from municipal waste.  
If the battery contains more than the specied values of lead (Pb), mercury (Hg) or cadmium (Cd), these chemical symbols will  
appear below the crossed-out wheeled bin symbol.  
By participating in separate collection of batteries, you will help to ensure proper disposal and to prevent potential negative effects  
on the environment and human health.  
5.2 Rohs compliance  
Turkey RoHS compliance  
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.  
[Republic of Turkey: In conformity with the WEEE Regulation]  
中国大RoHS – Chinese Mainland RoHS  
根据中国大子信息染控制管理法》(也称中国大RoHS), 以下部分列出了Barco品中可能包含的有毒和/或有  
害物的名称和含量。中国大RoHS指令包含在中国信息产业MCV准:子信息品中有毒物的限量要求中。  
According to the “China Administration on Control of Pollution Caused by Electronic Information Products” (Also called RoHS of  
Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may  
contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the  
section “Limit Requirements of toxic substances in Electronic Information Products”.  
零件(名称)  
有毒有害物元素  
Component Name  
Hazardous Substances or Elements  
铬  
溴联苯  
二苯醚  
(Hg)  
(Pb)  
(Cd)  
(Cr6+)  
(PBB)  
(PBDE)  
x
x
x
x
0
0
0
0
0
0
0
0
印制路配件  
Printed Circuit  
Assemblies  
(线)缆  
Cables  
R5900001 CLICKSHARE 21/11/2013  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
5. Environmental information  
x
x
x
x
0
0
0
0
0
0
0
0
0
0
0
0
底架  
Chassis  
源供器  
Power Supply Unit  
文件书  
0
0
Paper Manuals  
O: 表示有毒有害物部件所有均材料中的含量均在 SJ/T 11363-2006 定的限量要求以下.  
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the  
limit requirement in SJ/T11363-2006.  
X: 表示有毒有害物至少在部件的某一均材料中的含量超出 SJ/T 11363-2006 定的限量要求.  
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is  
above the limit requirement in SJ/T11363 2006.  
在中国大陆销售的相应电子信息品(EIP)都必遵照中国大子信息染控制标识要求》保使用期限(EFUP)  
标签Barco品所采用的EFUP标签阅实例,徽内部的号使用于制定品)基于中国大的《子信息保使用期限  
。  
All Electronic Information Products (EIP) that are sold within Chinese Mainland must comply with the “Electronic Information Products  
Pollution Control Labeling Standard” of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The  
number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “Standard of Electronic Information Products  
Environmental Friendly Use Period” of Chinese Mainland.  
Image 5-1  
5.3 Production address  
Factory  
捷普科技(上海)限公司  
上海市田林路600号  
邮编200233  
30  
R5900001 CLICKSHARE 21/11/2013  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   

Accton Technology Switch 12i User Manual
Acoustic Research Speaker System AW850 User Manual
Actiontec electronic Modem GT701 WG User Manual
Aiphone Home Security System C 123l A User Manual
Alpine Car Stereo System VPA B222 User Manual
American Standard Hot Tub 6060LC User Manual
Audiovox Remote Starter PRO 9171FT User Manual
Audiovox Speaker JSP1044 User Manual
AVerMedia Technologies Security Camera EB1304 User Manual
BabySmart Life Jacket 99 01069 20 A0 User Manual