Barco Camcorder H400 User Manual

iCon H250 / iCon H400 / iCon H500  
Installation manual  
R9010510  
R9010500  
R9010501  
R59770070/02  
13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
TABLE OF CONTENTS  
1. Hard disk recovery kit ............................................................................................. 3  
1.1 Introduction ........................................................................................................................... 3  
2. Hard disk recovery procedure ................................................................................... 5  
2.1 iCon server boot configuration ....................................................................................................... 5  
2.2 Defining commands .................................................................................................................. 6  
2.3 The recovery.......................................................................................................................... 7  
2.4 iCon H250 / H400 / H500 server setup ............................................................................................. 10  
Index......................................................................................................................13  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
2
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Hard disk recovery kit  
1. HARD DISK RECOVERY KIT  
Overview  
1.1 Introduction  
What can be done in case of hard disk failure?  
There is a possibility to recover the hard disk. This might eliminate the need to replace it in case of a hard disk failure.  
The recovery can be needed in case of non repairable virus infection, forgotten password, blue screen at start up...  
In this procedure we will use the Linux operating system to do the recovery.  
WARNING: This tool will remove all data from your hard disk!  
Procedure  
We first change the BIOS settings in order to make the projectors’ server boot from the USB DVD reader, using the image file of the  
firmware.  
Then we start the hard disk recovery. At the end of the procedure, we put the BIOS settings back to its original state.  
Kit contents  
The delivered kit includes the following items:  
R32998700: DVD-ROM containing the image file for your projector (hard disk data)  
R32998600: CD-ROM containing Linux recovery tool  
Image 1-1  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1. Hard disk recovery kit  
4
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Hard disk recovery procedure  
2. HARD DISK RECOVERY PROCEDURE  
Overview  
2.1 iCon server boot configuration  
Necessary tools  
DVD-ROM: Hard Disk Recovery Data iCon H250 / iCon H400 / iCon H500  
CD-ROM: Hard Disk Recovery Data iCon H250 / iCon H400 / iCon H500  
USB DVD reader device  
USB keyboard  
Windows® XP product key  
How to change the boot configuration?  
1. Connect the USB DVD reader device and the USB keyboard to the server of you projector  
Image 2-1  
2. Power up your projector  
3. When the server starts (on the first beep sound), press F2 to enter the BIOS  
4. Navigate to the tab Boot  
5. Use the + and the - key to move the USB DVD-ROM to the top of the Boot priority list  
Tip:  
You may have to use the x key to move it form the Excluded from boot order-list to the Boot priority order-list!  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Hard disk recovery procedure  
Image 2-2  
Image 2-3  
6. Put the CD-ROM Hard Disk Recovery Data in the USB DVD reader device  
7. Navigate to the tab Exit  
8. Select Exit Saving Changes  
Image 2-4  
2.2 Defining commands  
How to define the commands?  
1. At the boot prompt, type the following text: fb1024 docache doeject  
Image 2-5  
Warning: You only have a limited amount of time to enter this command! If you exceed this time, type shutdown —r now  
and restart the procedure!  
Note: The keyboard layout at this moment is QWERTY  
6
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Hard disk recovery procedure  
2. After about 5 seconds, the Load keymap (Enter for default) : prompt will appear: you have a limited amount of time to change  
the keyboard configuration. For AZERTY you can enter the following figure: 2 (= the figure corresponding to Belgian keyboard  
configuration).  
Image 2-6  
3. A few seconds later, the USB DVD reader will eject the disc. You see this prompt: root@sysresccd/root%  
Image 2-7  
4. Remove the CD-ROM Hard Disk Recovery Data from the USB DVD reader  
2.3 The recovery  
How to do the hard disk recovery?  
1. Insert the DVD-ROM Hard Disk Recovery Data in the USB DVD reader  
2. At the prompt, enter the following text: mount —t iso9660 /dev/sr0 /mnt/cdrom  
Tip:  
Pay attention to the spaces!  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Hard disk recovery procedure  
Image 2-8  
Note: You will see appear the following message: mount: block device /dev/sr0 is write-protected, mounting read-only  
3. At the prompt, enter the following text: partimage  
Image 2-9  
4. Navigate to the item Image file to create/use using the tab key and enter the following text:/mnt/cdrom/iconh400.000  
Image 2-10  
Note: iconh400.000 is the name of the file with the firmware and data. It may differ depending on the version and the projector  
type you are recovering (e.g. iconh250.000 or iconh500.000)!  
5. Press tab  
6. Use and the space bar to select the item Restore partition from an image file  
7. Press F5 , verify the partition description and use the space bar to close the window  
8
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Hard disk recovery procedure  
Image 2-11  
8. Press F5 and use the space bar to select OK . The disk recovery will now start.  
Image 2-12  
Image 2-13  
9. At the end of the recovery, use the space bar to select OK  
Image 2-14  
10.Now enter the following text: shutdown —r now  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Hard disk recovery procedure  
Image 2-15  
2.4 iCon H250 / H400 / H500 server setup  
Set the boot configuration to its original state  
1. When the server restarts (on the first beep sound), press F2 to enter the BIOS  
2. Navigate to the tab Boot  
3. Use the + and the - key to move the IDE 0 to the top of the Boot priority list  
4. Navigate to the tab Exit  
5. Select Exit Saving Changes: the server will start to reboot  
Setup the server again  
1. After some minutes, you will be asked to enter the Windows® XP Product Key: enter this key. You can find it on a label on the  
bottom plate of the projector  
Image 2-16  
2. Now the Windows® operation system reboots: you will be asked to enter the password. Enter the text: Barco  
Tip:  
Check the configuration of your keyboard first (AZERTY or QUERTY)  
3. Start the Auto-configuration by selecting Now  
10  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Hard disk recovery procedure  
Image 2-17  
Note: By choosing Now, the resolution will change form 1280x1024 (which can be viewed on a common monitor resolution) to  
1920x1080 (HDTV)  
4. On the next window, you can choose to start the Barco Desktop Integration by selecting Yes. This will enable the My Sources  
and My Layouts menu, instead of the standard My Pictures and My Music menu.  
5. The operation system now logs you off: you can log in again and start using the server. The Barco selected wall paper will be  
visible on the desktop.  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Hard disk recovery procedure  
12  
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
INDEX  
B
I
D
R
H
hard disk 3, 5  
S
R59770070 ICON H250 / ICON H400 / ICON H500 13/06/2007  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

3Com Network Card WL 455 User Manual
3M Cable Box 2250M User Manual
3M SONAR SE 400 User Manual
AEG Double Oven D8800 4 User Manual
Alpine CD Player CDA 7990 User Manual
Amana Clothes Dryer LED20AW User Manual
Avocent Switch SwitchView SC User Manual
Axis Communications Security Camera P5532 User Manual
Bakers Pride Oven Fryer ALF F User Manual
Beko Refrigerator CF540B User Manual