Audiovox Car Satellite Radio System SIR CK3 User Manual

PNP3 SHUTTLE  
p.tune  
s.seek  
Vehicle Installation  
Guide SIR-CK3  
001  
ChannelName  
Artist  
Song  
Category 12:00P A-1  
JUMP  
128-7194  
1 of 20  
Released: 8-9-04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Congratulations ........................................................................................ 4  
Cautions and Warnings ............................................................................ 5  
Contents SIR-CK3 ................................................................................... 6  
Hardware Kit................................................................................. 6  
Installation/Wiring Precautions ................................................................. 7  
Setting Up and Installing Your Kit.............................................................. 7  
Interconnect Diagram ................................................................... 8  
Installing the Cradle Using Double-Sided Tape ........................... 11  
Using Other Manufacturer’s Mounts ........................................... 11  
Installing the Shuttle Into the Cradle............................................ 11  
Sirius Program Listening Options .......................................................... 13  
Mounting the Vehicle Antenna................................................................. 14  
Warranty................................................................................................. 18  
-3-  
128-7194  
3 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations  
You are one step closer to experiencing Sirius Satellite Radio. Sirius will revolutionize your in-home  
or vehicle entertainment with:  
Over 120 channels of original programming, including –  
65 channels of 100% commercial-free music – guaranteed,  
Over 50 channels of world-class sports, news, talk and information.  
Your Model PNP3 Audiovox Shuttle must be used with an adapter kit, such as the Audiovox Home kit,  
Boom Box or Vehicle Kit as required by your specific installation needs. These kits are available at  
retailers where Audiovox main units are sold.  
Audiovox Home Kit: SIR-HK3  
Audiovox Vehicle Kit: SIR-CK3  
Audiovox Boombox: SIR-BB3  
Accessories:  
RCA Adapter Cable, SAT-RCA  
FM Switching Box, SAT-SWB  
-4-  
128-7194  
4 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions and Warnings  
1. Do not install the Shuttle in a position that hinders  
your view through the windshield, or obstructs view  
ing of the dashboard indicators and displays.  
2. Do not install the unit where it may obstruct the  
operation or deployment of safety devices, such  
as airbags, etc.  
3. Do not allow operation of the unit to detract from  
safe driving practices; remember that you are  
responsible as the vehicle operator to adhere to  
all safe driving and traffic regulations.  
4. This unit complies with the interference limits  
relative to a Class B digital device, applicable  
under Part 15 of the FCC Rules regarding  
installation in a residential environment. If the unit  
is not installed in accordance with these instruc-  
tions, it could cause harmful interference to radio or  
television reception. If this condition persists after  
corrective action, consult your dealer or experi-  
enced installation facility.  
5. By adhering to these warnings and safety consider-  
ations, serious accidents and/or personal injury can  
be avoided.  
-5-  
128-7194  
5 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents SIR-CK3  
HARDWARE KIT (P/N 150-1577)  
Audio Cable  
(Optional)  
(P/N SAT-RCA)  
Install Manual  
(P/N 1287194)  
Base  
(P/N 136-3804)  
PhillipsMachine  
1.6” W X 2”Long  
DoubleSidedFoamTape  
(P/N 138-1305)  
Screw (M4 x 8mm)  
With Captive Lock  
and Flat Washer  
(P/N 100-2329)  
Antenna  
1 pc.  
(P/N 118-1135)  
1 pc.  
1 pc  
Cradle CK3  
(P/N 136-3801)  
4 pcs.  
Alcohol Swab  
(P/N 138-1189)  
OPTIONAL  
FM Switching Box Assy  
P/N SAT-SWB (6 Meter)  
1 pc.  
DC Power Adapter  
(P/N 112-3459)  
1 pc.  
1 pc.  
1 pc.  
1 pc.  
-6-  
128-7194  
6 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up and Installing Your Kit  
Installation/Wiring Precautions  
NOTE: The SIRIUS® signal can be received and  
processed virtually anywhere as long as there  
are no obvious satellite signal obstructions such  
as nearby buildings, high terrain, parking  
garages or tunnels.  
1. To prevent a short-circuit, be sure to turn off the  
ignition and remove the negative (-) battery cable  
prior to installation. Connect power wires last.  
1. Cabling Interconnections  
2. Do not install the unit in the locations exposed to  
direct sunlight or, in areas subject to extreme  
temperatures.  
You can begin to enjoy Sirius® Satellite Radio as  
soon as the Shuttle and Vehicle Kit installation  
are complete. Set up your Audiovox Shuttle using  
the following installation instructions, or enlist the  
help of a professional installer:  
3. Incorrect installation may cause damage to the  
system. Mount the unit firmly in place, using  
the supplied hardware.  
2. Installing the Cradle Mount Base Assembly  
4. Be careful not to damage the vehicle wiring.  
a. Interconnect all of the components as shown  
on the adjacent page to verify that the system  
operates normally.  
b. Locate a firm, reasonably flat surface within your  
car to permit optimum viewing and line-of-sight  
access by the supplied remote control unit.  
5. Be sure to use the supplied screws and washers.  
6. Be careful not to snag any wires when tightening  
screws.  
-7-  
128-7194  
7 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VEHICLE  
RADIO  
ANTENNA  
Interconnect Diagram  
VEHICLE  
FM RADIO  
NOTE:  
SHUTTLE CRADLE  
CK3  
(REAR VIEW)  
1. THE FM TRANSMITTER OPTION  
MUST BE SET TO ”FM ON” IN THE  
SHUTTLE USER MENU. (REFER TO  
THE OWNER’S MANUAL, PUBLICA-  
TION NO.128-7193.)  
2. IF THE SIR-CK3 IS INSTALLED  
USING THE WIRELESS FM  
SWITCHING BOX, SAT-SWB, OPTION,  
DO NOT CONNECT THE AUDIO  
CABLE TO THE LINE OUT CONNEC-  
TOR OF THE CRADLE.  
SHUTTLE  
ANTENNA  
WIRELESS FM SWITCHING  
BOX SAT-SWB (PURCHASED  
SEPARATELY)  
OPTIONAL  
AUDIO CABLE  
(PURCHASED  
SEPARATELY)  
TO VEHICLE  
RADIO ANTENNA  
JACK  
DC POWER  
ADAPTER  
TO VEHICLE  
+12 VDC POWER  
RECEPTACLE  
TO AUXILIARY AUDIO  
INPUT OF RADIO OR  
ENTERTAINMENT SYSTEM  
-8-  
128-7194  
8 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION:  
Do not install the mounting base  
on a leather or fabric surface, or  
in a position that could impair  
your vision, block air bag(s) or  
obstruct vehicle dashboard  
controls and/or radio CD/casette  
operational displays.  
d. The cradle contains a rear mounting plate  
After deciding the mounting configuration,  
loosen and remove two flat-head screws  
securing the plate to the cradle and remove  
the plate. Save the two screws for reassembly.  
NOTE: The adhesive backing on the base  
will not permit easy repositioning once  
it has been mated to the surface; use  
extreme care and planning when  
selecting the mounting location. If the  
base is to be screwed to the surface,  
make sure the area in back of the  
mounting surface is clear of wires or  
other items to prevent unintentional  
damage.  
REAR  
MOUNTING  
PLATE  
CRADLE  
ASSEMBLY  
(REAR VIEW)  
FLAT-HEAD  
SCREWS (2)  
c. Using the alcohol swab supplied with your kit,  
clean the mounting surface and thoroughly wipe  
the area dry with a clean lint-free cloth.  
-9-  
128-7194  
9 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
e. If the outside air temperature is cold, it may  
be beneficial to warm the adhesive backing  
on the base using a portable hair dryer, or  
by holding the backing surface in front of a  
vehicle heater vent.  
BASE  
SCREW HOLES  
(4) FOR DIRECT  
HARDMOUNTING  
ASSEMBLY  
MOUNTING  
PLATE  
f. Remove the plastic liner from the adhesive  
backing on the base, and fix the base in  
position on the surface; make sure the  
mounting pad is accurately positioned on  
the first try, since repositioning may be  
difficult, if not impossible.  
MOUNTING  
BASE  
ASSEMBLY  
g. If the mount is to be screwed in place, do  
not remove the plastic liner from the  
adhesive backing. Use appropriate sheet  
metal or machine screws for this purpose.  
PLASTIC LINER  
AND ADHESIVE  
BACKING  
MOUNTING  
PLATE  
-10-  
128-7194  
10 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Allow a 72-hour period for the adhesive  
d. Peel the backing from the exposed side of the  
tape and carefully position the cradle on the  
mounting surface, gently pressing the cradle  
into place.  
backing to cure completely.  
3. Installing the Cradle Using Double-Sided Tape  
You can mount the cradle directly to your dashboard  
or other flat surface without using the cradle  
mount in the kit. To do this, do not remove the  
mounting plate assembly from the cradle.  
4. Using Other Manufacturer’s Mounts  
The Shuttle Cradle can also be installed using other  
manufacturer’s mounts; the mounting plate  
provisions on the rear or bottom of the cradle provide  
you with multiple mounting options within the  
vehicle using various vehicle-specific aftermarket  
brackets, such as those purchased separately from  
Panavise, Pro-Fit, etc.  
a. Remove the 3/4” x 3” double-sided tape from  
the supplied kit.  
b. Determine the location of the cradle, and clean  
the mounting surface as before.  
c. Peel the backing from one side of the tape, and  
press the tape in place on the rear or bottom  
cradle mounting plate.  
5. Installing the Shuttle into the Cradle  
Install the shuttle as follows:  
a. Carefully line up the shuttle rear spine grooves  
with the cradle guide spines; slide the latch tab  
lever to the unlock ( ) position, and lower the  
shuttle into the cradle.  
-11-  
128-7194  
11 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LATCH TAB  
LOCK/UNLOCK  
LEVER  
CRADLE  
TOP VIEW  
SHUTTLE REAR  
SPINE  
GROOVES  
SHUTTLE  
REAR VIEW  
SHUTTLE  
LATCHING TAB  
RECESS  
SHUTTLE  
LATCHING  
TAB  
20-PIN  
SYSTEM  
CONNECTOR  
LATCH TAB  
LOCK/UNLOCK  
LEVER  
CONNECTOR  
GUIDEPIN  
CRADLE  
FRONT VIEW  
CRADLE  
REAR VIEW  
CRADLEGUIDESPINES  
b. After making sure the connectors are properly  
lined up, gently press down on the shuttle to  
mate the connectors together.  
c. Slide the latch tab lever to the lock ( ) position;  
the tab will enter the shuttle latching tab recess  
to prevent vertical movement. The shuttle  
should now be nestled securely in the cradle.  
-12-  
128-7194  
12 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Sirius Program Listening Options  
The Shuttle and Cradle provide an audio output  
signal in three manners:  
Sirius signal received at the ANT cradle  
antenna input can be played through your car  
radio when tuned to one of these fequencies.  
1. When using the SIR-CK3 cradle with the FM  
switching box option, the audio signal can  
be transmitted to a car radio on one of over 100  
selectable FM frequencies using the menu  
options included in your PNP3 shuttle. (Refer  
to the shuttle owner’s manual.) The audio signal  
can then be played through your car radio when  
the car radio is tuned to one of these  
frequencies.  
3. When using the SIR-CK3 cradle without the FM  
switching box option, the audio signal can be  
routed through an optional audio cable (Part  
No. SAT-RCA) and applied to the auxiliary inputs  
of a radio or entertainment system.  
SHUTTLE CRADLE  
(REAR VIEW)  
2. In this instance, use of a hard-wired FM  
transmitter, such as the optional FM  
Switching Box assembly (Part No. SAT-SWB)  
is available and provides a hard-wired FM  
output when connected to the FM OUT  
TO CAR RADIO  
ANTENNA INPUT  
connector on the left rear side of the cradle;  
the other end of the switching box plugs into  
the antenna jack of your radio. By using this  
assembly, and selecting the appropriate FM  
output frequency (87.9MHz -107.9MHz) using  
the shuttle FM Transmitter Option menu, the  
FM SWITCHING  
BOXSAT-SWB  
-13-  
128-7194  
13 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Mounting the Vehicle Antenna  
s
.
s
e
e
k
p
.
ut  
n
e
The antenna should be placed on a relatively flat  
surface on the vehicle exterior, preferably on the  
roof (high point) or on the trunk (convertible). To  
mount the antenna:  
001  
C
hannel  
tist  
Song  
at or  
N
am  
e
A
r
C
e
g
y
12:00P  
A-1  
JU  
M
P
SHUTTLE  
(TYPICAL)  
a. Plug the antenna into the ANT connector  
on the back of the cradle.  
b. Place the antenna at the preferred location on  
the roof or trunk surface. If the vehicle is  
equipped with a roof or trunk rack, the antenna  
may have to be mounted off-center on the  
surface. The magnet will secure the antenna in  
the desired position.  
+12 VDC  
ADAPTER  
SAT  
ANTENNA  
(TYPICAL)  
c. Apply power to the Shuttle system as outlined  
in the associated User Guide and obtain an  
audio output. If no audio is heard, first check  
the signal strength indicator located on the  
bottom left corner of the display to ensure the  
antenna is receiving an optimum signal. If  
necessary, move the antenna to different  
positions on the surface until an audio output  
is heard. This is the desired antenna position  
and should be marked with masking tape or by  
another non-scratch method.  
d. After determining the optimum position, turn off  
Shuttle power, disconnect the power  
adapter from the vehicle cigarette lighter  
receptacle and disconnect the antenna cable.  
-14-  
128-7194  
14 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
e. Plan the routing of the antenna cable to the  
Shuttle RF input. Make sure you avoid any  
obstructions that could crimp, kink or twist the  
cable; use protective grommets wherever rough  
openings are encountered.  
f. Route the cable from the antenna position to  
the interior of the vehicle, working the cable  
under the rear window molding; make  
adjustments and take up slack whenever  
necessary.  
ANTENNA  
g. At the lowest point of the rear window, route the  
cable into the trunk, taking advantage of existing  
cable conduits. Then snake the cable around  
the passenger compartment to the back of the  
Sirius cradle.  
ROUTING  
THE CABLE  
h. In SUV’s, minivans, etc., route the cable into the  
vehicle under the rubber molding of the hatch  
door or tailgate, and then under the interior trim.  
NOTE: Avoid exposing the cable in the driver  
and passenger areas where it could  
become entangled in feet or other  
objects.  
-15-  
128-7194  
15 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
i. Plug the antenna cable into the ANT  
connector on the back of the cradle; then plug  
the cigarette lighter adapter into the lighter  
receptacle. The integral power LED of the  
power button ( ) will light red.  
j. You are now ready to enjoy Sirius programming  
within your vehicle.  
CAUTION: You could drain the vehicle battery if  
the cigarette lighter adapter remains  
plugged in after the ignition is turned  
off. Unplug the adapter to prevent  
this possibility.  
-16-  
128-7194  
16 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS PAGE LEFT BLANK INTENTIONALLY  
-17-  
128-7194  
17 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 MONTH LIMITED WARRANTY  
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,  
undernormaluseandconditions, beprovendefectiveinmaterialorworkmanshipwithin12monthsfromthedateoforiginalpurchase, suchdefect(s)  
will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.  
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill  
of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below.  
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for  
installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical systems.  
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,  
improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE  
EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE  
AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY  
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF  
48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or  
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage  
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994  
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA  
128-6464  
-18-  
128-7194  
18 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS PAGE LEFT BLANK INTENTIONALLY  
-19-  
128-7194  
19 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2004 Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788  
128-7194  
-20-  
128-7194  
20 of 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Home Theater System SCP725 User Manual
AB Soft Network Router TDW 33 User Manual
Acer Computer Monitor B203W User Manual
ADC Switch Z8F04A08100KIT User Manual
Aiphone Home Security System TB 20M D User Manual
Airlink Switch ASW 2402 User Manual
Alpine Car Stereo System 68 14470Z98 A User Manual
Alpine Stereo Amplifier DVA 9965E User Manual
AOpen Digital Photo Frame D X37PU EG E0110A User Manual
Beko Refrigerator TL 685 APW User Manual