User Manual
AtlonA
HDMI with RS232 and with
Bi-Directional IR Extenders
over CAT5/6/7 up to 350ft
AT-HD4-V110SR
www.atlona.com | toll free: 1-877-536-3976
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
INTRODUCTION
The Atlona AT-HD4-V110SR is HDMI with RS232 and Bi-Directional IR Extender Kit over Cat5/6/7, designed on
HDBaseT technology which allows full 3D and 4Kx2K (4 times the 1080p) up to 350ft.
The HD4-V110SR is capable of transmitting Ethernet channel from one location to another, perfect for digital
signage applications.
PACKAGE CONTENTS:
• 1 x AT-HD4-V110S (transmitter module)
• 1 x AT-HD4-V110R (receiving module)
• 2 x 5v Power supplies (Universal 110/240V)
• 1 x Set of Wall Mounting Ears
• 2 x IR Emitter sensor
• 2 x IR Receiver sensor
• 1 x Instructions manual
FEATURES:
• Transmits HDMI (Digital Video and Audio), RS232 and Bi-Directional IR up to 350ft (100m)
• Supports Full Uncompressed HD Video
• Supports high resolution video HD: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz),
2k (2048x1080p) and 4kx2K (4096x2160p) - 4 times higher than 1080p
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768,
1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200, 2048x1080p, 4096x2160p - 4 times
higher than 1080p
• Full HD and 3D support - all 7 3D formats
• Fully EDID Compliant
• Fully HDCP Compliant
• Supports all VESA formats which is perfect when used with specialized projectors or commercial
LCD panels.
• Enables 10.2Gbps of HDMI (including HDCP) over 350ft Cat5/6/7 cable.
• Highest Audio Formats: Dolby TrueHD & DTS Master Audio 7.1 (and all below)
• Supports Refresh Rates: 24Hz, 30Hz, 50, 60Hz
• Supports Bi-directional IR transmission, perfect for Control4, RTI, HAI users as this ability allows
sending IR to the remote locations from the control systems and from the remote locations to the
control systems.
• Supports RS232 pass-though, perfect for integrating a 3rd party control system.
• Supports transmission distances up to 350ft @ at full resolution
• Wall Mountable, mounting ears are included.
• Locking Power Supplies
• Easy to install, simple to operate and the most effective solution for long signal extension.
• Ideal for whole house A/V, video broadcasting, remote monitoring, presentations and educational
facilities.
www.atlona.com | toll free: 1-877-536-3976
3
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
SPECIFICATIONS:
Transmitter Inputs
HDMI (Type A), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45)
Link to Receiver (RJ45), Ethernet (RJ45)
Link to Transmitter (RJ45), Ethernet (RJ45)
HDMI (Type A), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45)
Yes
Transmitter Outputs
Receiver Inputs
Receiver Outputs
HDCP/EDID Compliant
Supports high resolution video HD
480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz),
2k (2048x1080p), 4kx2k 4096x2160p
Supports high resolution video VESA 640x480, 800x600, 1024x768, 1280x800, 1280x768,
1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200,
2048x1080p and 4096x2160p - 4 times higher than 1080p
Distance at the highest resolution
and full color depth
350ft
Deep Color
48bit up to 330ft (100m)
Power Consumption (max.)
Video Bandwidth
2.5W (transmitter) and 5.5W (receiver)
up to 10Gbps
Input TMDS signal
Input DDS signal
1.2 volts (peak-to-peak)
5 volts (peak-to-peak)
Power Supply
5V/4A (110/220 universal) – Locking Type
5.98×4.13×1.22 (Lx W x H)
2.1 (transmitter + receiver)
-5 to +35°C (-41 to +95 °F)
5 to 90 % RH (no condensation)
Dimensions (inch)
Weight (lb)
Operating Temperature Range
Operating Humidity Range
PANEL DESCRIPTION
5.1. Transmitting Module
5.1.1. Front Panel
1
2
3
4
1. HDMI Input
2. Ethernet In/Out
3. IR RX
4. IR TX
www.atlona.com | toll free: 1-877-536-3976
4
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
5.1.2. Rear Panel
1
2
3
4
1. RS-232 In
2. POWER ON Indicator
3. LINK to a Receiver
4. 5V Locking Power In
5.2. Receiving Module
5.2.1. Front Panel
1
2
3
4
1. HDMI Output
2. Ethernet In/Out
3. IR RX
4. IR TX
5.1.2. Rear Panel
1
2
3
4
1. RS-232 In
2. POWER ON Indicator
3. LINK to a Transmitter
4. 5V Locking Power In
www.atlona.com | toll free: 1-877-536-3976
5
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
CONNECTION AND OPERATION
1. Connect the HDMI Source e.g., Cable/satellite Receiver, Blu-Ray Player or a Video Switch to the AT-HD4-
V110SR (transmitting unit)
2. Connect the HDMI Display e.g., Projector, LCD/LED or a switch to the AT-HD4-110R (receiving unit)
3. Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired cor-
rectly before connect it to the HD4-V110SR modules.
4. Connect the power supplies to both transmitter and receiver and the video and in a few seconds the video
should appear on the display.
5. For users who want to transmit IR signal from the Display to the source, should connect the IR RX to the
receiver unit and IR TX to the transmitter.
6. For users who want to transmit IR signal from the Source to the Display, should connect IR RX to the trans-
mitter and IR TX to the receiver module.
Note: It is very important to connect IR RX and IR TX to its proper connections. If the IR TX is connected to the
IR RX connection or other way around, the IR sensors will get damaged.
7. For users who want to transmit RS232 signal from the control system or computer to the display device,
should connect the RS232 (DB9) cables to the transmitter and receiver modules respectively.
8. RS232 Port on the transmitter and Receiver can also be used for firmware upgrades to the HD4-V110SR
modules.
TROUBLESHOOTING
1. No Video Signal on the Display or Signal is going in and Out:
a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected and
the distance is within the limits.
b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct con-
nection bypassing all additional equipment.
c. Please try to re-terminate your CAT5/6/7 wire to 568B
d. Reboot your source and try connecting it directly to the display to see if the video and audio will pass-
through. If so, please go into the menu of the source and select an actual resolution that TV handles instead
of AUTO – which is default.
e. If your sources is a computer (laptop or desktop), please enable the DVI output.
•
Windows computers: Select Properties Select Display resolutions Select Detect Display Select
second Display Select Extended Display check box Select most appropriate resolution (most basic would
be 1024x768)
•
Mac Computers: Select Settings Select Displays Select Detect Display Select Arrangement
Select Mirror Displays Select most appropriate resolution (most basic would be 1024x768)
2. IR Signal is not passing through:
Make sure you have IR RX and IR TX connected to its respective interfaces. If not, you may have burned the
IR sensor on the IR RX or and IR TX and therefore should replace them.
3. No Audio Signal or Garbled Audio
a. Your display might not be able to accept audio formats that you are trying to send, most displays can only
accept PCM or Stereo Audio as they only have 2 speakers. Please try selecting PCM or Stereo audio under
the source audio configuration.
b. If you are connecting Source to an AVR with the AT-HD4-V110SR and AVR is connected to a TV or a Projec-
tor with a standard HDMI cable or another extender and your AVR is only not getting full Dolby Digital or
DTS audio. This issue is related to the EDID issue of the AVR, we suggest changing an AVR for a better one
or using AT-HDSync (Atlona HDMI Corrector) to fix this issue.
www.atlona.com | toll free: 1-877-536-3976
6
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
SAFETY INFORMATION
Avoid excessive humidity, sudden
temperature changes or temperature
extremes.
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture.
Keep this product away from wet locations
such as bathtubs, sinks, laundries, wet
basements and swimming pools.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Use only accessories recommended by
ATLONA to avoid fire, shock or other
hazards.
Do not modify the wall plug.
Doing so will void the warranty and safety
features.
Unplug the product before cleaning. Use
a damp cloth for cleaning. Do not use
cleaning fluid or aerosols, which could
enter the unit and cause damage, fire or
electrical shock. Some substances may
also mar the finish of the product.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in case it requires
disconnection.
Precautions
Never open or remove unit panels or make
any adjustments not described in this
manual. Attempting to do so could expose
you to dangerous electrical shock or other
hazards. It may also cause damage to your
AT-HD4-V110SR. Opening the product will
void the warranty.
FCC Regulations state that any
unauthorized changes or modifications to
this equipment not expressly approved by
the manufacturer could void the
user’s authority to operate this
equipment.
Do not attempt to service the unit. Instead
disconnect it and contact your Authorized
ATLONA reseller or contact ATLONA
directly.
Operate this product using only the
included external power supply. Use of
other power supplies could impair
performance, damage the product or cause
fires.
In the event of an electrostatic discharge,
this device may automatically turn off. If this
occurs, unplug the device, and plug it back
in.
Protect and route power cords so they will
not be stepped on or pinched by anything
placed on or against them. Be especially
careful of plug-ins, or cord exit points from
this product.
www.atlona.com | toll free: 1-877-536-3976
7
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
1. LIMITED WARRANTY
Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the ac-
companying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from
defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law
imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdic-
tions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.
2. CUSTOMER REMEDIES
Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’
option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this
Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty
is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be war-
ranted for the remainder of the original warranty period or 3 year, whichever is longer.
3. NO OTHER WARRANTIES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS
DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IM-
PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO
THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPE-
CIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.
4. NO LIABILITY FOR DAMAGES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALLATLONA TECHNOLOGIES OR
ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, IN-
CIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING
OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS SUPPLIERS’
ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTU-
ALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
www.atlona.com | toll free: 1-877-536-3976
8
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership
record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware
updates.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-
ranty rights.
www.atlona.com | toll free: 1-877-536-3976
9
Download from Www.Somanuals.com. All Manuals Search And Download.
For International: 1-408-962-0515
|