Atlona Switch AT PROHD88M SR User Manual

User Manual  
AtlonA  
8x8 HDMI matrix Switch with  
8 x CAT5 Receivers included  
AT-PROHD88M-SR  
HDMI MATRIX 8:8:2  
AT-PROHD88M-R  
AT-PROHD88M-S  
FRONT VIEW  
FRONT VIEW  
AT-PROHD88M-R  
REAR VIEW  
AT-PROHD88M-S  
REAR VIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
INTRODUCTION  
Atlona Technologies’ AT-PROHD88M-SR is an 8x8 HDMI Matrix Switcher over Twisted Pair designed to work  
as a switcher for multiple Audio/Video sources and displays. The Atlona unit is capable of switching HDMI  
signals between eight sources (such as: Blue-Ray player, HD DVD player, satellite receiver, game system, etc.)  
and eight displays. Because it is a matrix switch, any or all of the 8 inputs can simultaneously be switched to  
any or all of the outputs. Along with supporting HDMI 1.3 and HDCP Compliance, switcher will support high  
definition video in multiple resolutions of up to 1080p or 1920x1200. Five switching modes are available includ-  
ing front panel buttons, local IR, IR call back from remote locations, RS485 and TCP/IP. The PROHD88 is  
capable of routing IR signal from remote locations to the main location where the switcher is. The IR emitters/  
receivers can control the switch as well as sources next to it.  
The Atlona PROHD88M-SR has 8 dual* outputs.  
*Dual Output: HDMI + Dual Twisted Pair output where both are active at the same time. Each output could be  
connected to either 2 displays or AVR and a Display; however the signal from both outputs will be identical.  
PACKAGE CONTENTS:  
• AT-PROHD88M-SR (main switch)  
• 8 x AT-PROHD-REC (CAT5/6/7 receivers)  
• 8 x 5 VDC Power Supply (110/240v universal) – for receivers  
• 1 x 12 VDC Power Supply (110/240v universal) – for the main switch  
• 1 x IR Remote.  
• 1x IR receiver extension cable.  
• 8x 3ft galvanic isolated cables.  
• Rack Ears  
• 1 x USB to RS232 adapter cable.  
• Manual  
FEATURES:  
• HDMI 1.3c, HDCP and EDID compatible  
• 8 x CAT5/6/7 receivers are included  
• Allows up to eight HDMI sources to be independently switched to eight HDMI outputs, where each output is  
featured with HDMI and Twisted pair connections and both are active at the same time.  
• The eight outputs could show the same or different source simultaneously  
• Supports high definition resolutions up to 1920x1200 or 1080p  
• Supports all latest HDMI audio formats including Dolby TrueHD and DTS-HD  
• Switcher is featured with IR call back function which allows each remote location to send IR signal though  
CAT5/6/7 receivers back to the switch and further down to the nearby sources.  
• Each CAT5/6/7 output can go up to 165ft @ 1080p on CAT5/6 cables and up to 250ft @ 1080p on the CAT7  
cable (tested with Tyco wire). If more distance is required, Atlona offers CAT5/6/7 repeater (AT-PROHD-RP)  
unit which can double the distance and allow chain up to 6 units.  
• Each input and output port is able to support HDMI or DVI signal. For DVI signal adapter will be required.  
• Five switching modes: panel buttons, local IR, IR call back from remote locations, RS485 and TCP/IP.  
• Rack Mountable, comes with 19-inch Rack-Ears (4U)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
DIAGRAM  
8* HDTV  
8* HDMI Source  
2x CAT5e cable  
AT-HD88M-R  
PS3  
HDMI cable  
AT-HD88M-SR’s  
remote control  
Blu-ray Disc Player  
TiVo  
AT-HD88M-R  
AT-HD88M-R  
IR receiver  
HDMI Camera  
AT-HD88M-R  
Source device’s  
remote control  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
SPECIFICATIONS:  
Operating Temperature Range  
Operating Humidity Range  
Input Video Signal  
-5 to +35°C (-41 to +95 °F)  
5 to 90 % RH (no condensation)  
0.5-1.0 volts p-p  
Input DDC Signal  
12v (main unit) and 5v (receivers)  
Video Format Supported  
HDTV: 480p/576p/720p/1080i/1080p (50/60Hz)  
Computer: up to 1920x1200  
Audio Format Supported  
All latest HDMI audio formats including Dolby  
TrueHD and DTS-HD  
HDMI Standard  
HDMI 1.3c  
55ft (16m)  
Maximum Output Distance  
(HDM out)  
Maximum Output Distance  
RJ45 outputs  
165ft (50m) @ 1080p on CAT5/6 cables and  
Up to 250ft (80m) @ 1080p on the CAT7 cable  
(Tested with Tyco wire)  
Power Consumption  
Dimensions (inch)  
30wtts (Max)  
17.3’’L×11’’W×5.5’’H - 4U  
12LB/0.3LB (6kg)/(0.1kg)  
Main Unit Weight/Receiver  
PANEL DESCRIPTION  
Main Unit  
1. Front Panel  
4
HDMI MATRIX 8:8:2  
6
5
3
2
1
1. Power ON/OFF switch  
2. SET/ENTER (Push the ‘FN’ button to confirm change of an input channel to an output).  
3. Output selection push-buttons (Use it to choose the preferred output channel).  
4. Input selection push-buttons (Use it to choose the preferred input channel).  
5. IR window.  
6. LED indicator of input for output port 1 to 8.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
2. Rear Panel  
11  
1
2
3 4  
5
6
7
8
9
10  
1. IR extension.  
2. RS485 port.  
3. LAN port.  
4. IR emitter, corresponding to the Input port from 1 to 8  
5. RS232 port.  
7. Input ports 1 to 4.  
8. Power input.  
9. Output 5 and 8 with HDMI and CAT5E.  
10. Input ports 5 to 8.  
11. DIP switch setting.  
6. Output 1 to 4 with HDMI and CAT5E.  
Note: The TCP/IP port has to be connected to the computer via direct Crosswire CAT5/6/7 wire while if connected to the router it needs  
to be connected though Straight wire.  
HDMI Receiver (8 x Receivers included)  
Power Input  
HDMI Out  
IR Input RX  
RJ45 Inputs  
RJ45 inputs – please be careful when connecting RJ45 # 1 and # 2 inputs. They absolutely have to match the  
outputs on the switch. Output # 1 should be connected to Input # 1 and Output # 2 should be connected to  
Inputs # 2.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
CONNECT AND OPERATION  
1)  
Connect the HDMI input sources (such as HD-DVD, PS3, AppleTV, DirecTV etc) into the inputs on AT-  
PROHD88M-SR.  
2)  
3)  
Connect the HDMI outputs from AT-PROHD88M-SR (such as LCD, Plasma, LED, Projector, Monitor)  
Power on the input source you want to show. (Keep the unused input power OFF, otherwise it may  
interfere with the normal display.)  
4)  
5)  
Use IR remote, front panel, RS232, TCP/IP or RS485 connections to choose desired input source.  
IR calls back from remote locations allows controlling the matrix switch as well as nearby sources (such  
as DVD, AppleTV, Satellite, Cable and etc…).  
6) Instruction on IR Emitter.  
The sequence of “IR1, IR2, IR3, IR4, IR5, IR6, IR7, IR8” one-to-one correspond with “HDMI Inputs 1~8”. When  
an output chooses certain input, the call-back IR signal of RJ45 on this output will choose the corresponding  
“IR” port to send the signal out.  
For example, OUTPUT#1 chooses INPUT#3, then the call-back IR signal of RJ45 on OUTPUT#1 will choose  
“IR 3” to send the signal out.  
Note: For better functionality of the IR, we suggest to place the IR receiver Eye at the IR Eye of the controlling source.  
8) EDID Settings (PLEASE READ, IT IS VERY IMPORTANT):  
The functionality of the switch will depend on how you select the Dip Switches below. Please read the instruc-  
tions and explanations below to understand the purpose of different configurations.  
There are four DIP switches on the back of the 8x8 matrix switcher. Below you will find the definition of each  
one of the dip switches.  
Position ID  
EDID Operational Mode  
1
2
3
4
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
AUTO EDID MANAGEMENT (DIP # 1)  
AUTO EDID MANAGEMENT - LONG CABLES(DIP # 2)  
Up to 1080P with Stereo Audio (no deep-color) ) (DIP#3)  
Up to 1080P with 5.1 Audio (no deep-color) (DIP#4)  
Up to 1080P with Stereo Audio (deep-color) (DIP#5)  
Up to 1080P with 5.1 Audio (deep-color) (DIP#6)  
OFF  
OFF  
ON  
OFF  
ON  
OFF  
ON  
ON  
Note: 1 – ON and 0 – OFF  
EACH TIME DIP SWITCHES ARE CHANGED; THE ATLONA SWITCH HAS TO POWER CYCLED.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
DIP#1: Auto EDID Management (ADM) is a smart function which will allow users to have matrix switch figure  
out the best and most appropriate EDID.  
The way it works: Atlona 8x8 matrix acquires EDID from all the outputs and after processing it, chooses the  
EDID which will work on all the outputs.  
Example # 1: User has 8 outputs connected where 6 of the outputs are 1080P TV’s only and the other 2 loca-  
tions are 720P TV’s. The Atlona’s EDID would be 720P with 2-channel Stereo (because most TV’s will only be  
able to take stereo audio though HDMI input).  
Example # 2: User has 8 outputs connected, where 6 outputs are 1080P TV’s and the remaining are 2 x Sur-  
round Sound Receivers (after connected to the TV’s for video only). The Atlona’s EDID would be 1080P with  
Stereo or PCM (because most TV’s will only take Stereo Audio though HDMI input).  
Remark: If you don’t like the Auto EDID Management functions, switcher has some pre-recorded modes which  
will certainly satisfy you.  
DIP#2: This function is very similar to Note # 1; however it is designed for users who have very long CAT5/6/7  
cables and signal is going in and out. This DIP Switch setting will replace some of the hdmi control signals with  
video, which will allow picture to stabilize.  
DIP#3: Atlona Switcher has a few built-in EDID modes; this mode is for resolutions up to 1080P with Stereo Au-  
dio. When this mode is selected the deep-color will be disabled. Deep-color will only work on new TV’s which  
were built after April 2009. If you know that one of the displays doesn’t support deep color, we suggest to use  
this setting or DIP # 1 setting for signal to be reliable.  
DIP#4: Atlona Switcher has a few built-in EDID modes; this mode is for resolutions up to 1080P with 5.1 Digi-  
tal Audio. When this mode is selected the deep-color will be disabled. Deep-color will only work on new TV’s  
which were built after April 2009. If you know that one of the displays doesn’t support deep color, we suggest to  
use this setting or DIP # 1 setting for signal to be reliable.  
This mode is designed for applications where user has AV Receivers in each remote location which are able to  
accept Digital Audio from HDMI inputs. If this mode is selected and in even one of the locations user has a TV  
without an AV receiver, the TV might “mute” or start outputting garbled audio (because most TV’s don’t support  
digital audio though HDMI input)  
DIP#5: Atlona Switcher has a few built-in EDID modes; this mode is for resolutions up to 1080P with Stereo Au-  
dio. When this mode is selected the switcher will pass deep-color. Deep-color will only work on new TV’s which  
were built after April 2009. If you know that one of the displays doesn’t support deep color, we suggest using  
DIP # 1 or DIP # 3 setting for signal to be reliable.  
DIP#6: Atlona Switcher has a few built-in EDID modes; this mode is for resolutions up to 1080P with 5.1 Digital  
Audio. When this mode is selected the switcher will pass deep-color. Deep-color will only work on new TV’s  
which were built after April 2009. If you know that one of the displays doesn’t support deep color, we suggest  
using DIP # 1 or DIP # 3 setting for signal to be reliable.  
This mode is designed for applications where user has AV Receivers in each remote location which are able to  
accept Digital Audio from HDMI inputs. If this mode is selected and in even one of the locations user has a TV  
without an AV receiver, the TV might “mute” or start outputting garbled audio (because most TV’s don’t support  
digital audio though HDMI input)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
VERY IMPORTANT:  
If one of your Output devices is a projector or a display with a unique resolution your sources/source  
which are/is connected to the switch might not send out a proper video format which will result image  
to intermit or signal not show up on the display.  
Solution: Make sure your DIP switch configuration is either DIP # 1 or # 2. Route the device in question  
to the output in question. After that’s done, please perform the following operation: (Simultaneously  
press and hold the “Output # (in question) and “FN Key” buttons for three seconds). You shall see the  
following message to appear on your LED display: “MIX OK”  
If you receive a “MIX FL” – please try this operation again.  
IR REMOTE CONTROL  
The AT-PROHD88M-Sr comes with 16 button IR remote control, which could be  
used to control the switcher when pointing at it or controlling the switcher from  
a remote location by pointing the remote control to the IR Eye connected to the  
HDMI receiver.  
For users who would like to use a 3rd part IR remote control or IR remote sys-  
tem, we recommend either learning IR codes off the remote or copying and  
pasting the IR HEX code into the remote control software. The file with HEX  
codes could be found on Atlona website under downloads for AT-PROHD88M-  
SR.  
There are 2 scenarios which codes to use:  
• User will need to learn all 64 x codes in order to control each location  
when pointing at the switcher  
• User will only need to learn 8 x codes if there will be a separate remote  
for each remote location  
Note: The switcher can only accept and route IR signal which doesn’t exceed 38 KHz.  
In other words, if you are trying to send IR signal from the remote location though  
out HDMI receiver and the IR signal is higher than 38 KHz, the IR signal will not pass  
though.  
VERY IMPORTANT:  
When connecting IR receivers and IR emitters, be very careful as if they are reversed the IR Eye will  
burn-out and also may damage the IR module inside of the switch and Receiver.  
TX – Connects to the Switch  
RX – Connects to the HDMI Receivers  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
RS232 CONTROL:  
Baud Rate:  
Data bits:  
Parity:  
9600 bps  
8 bits  
None  
1 bit  
Stop bits:  
Flow control: None  
RS232 Cable Wiring:  
AT-PROHD88M-SR  
Controller  
Definition  
Pin  
1
Definition  
NC  
Pin  
1
NC  
Rx  
2
Tx  
2
3
Rx  
3
Tx  
4
NC  
4
NC  
GND  
NC  
NC  
NC  
NC  
5
GND  
NC  
5
6
6
7
NC  
7
8
NC  
8
9
NC  
9
Note: ‘ ’ is carriage return.  
OUTPUT  
COMMAND  
ACTION  
cir 00  
cir 01  
cir 02  
cir 03  
cir 04  
cir 05  
cir 06  
cir 07  
cir 08  
cir 09  
cir 10  
cir 11  
cir 12  
cir 13  
cir 14  
cir 15  
cir 16  
cir 17  
cir 18  
cir 19  
Output 1 select Input1  
Output 1 select Input2  
Output 1 select Input3  
Output 1 select Input4  
Output 1 select Input5  
Output 1 select Input6  
Output 1 select Input7  
Output 1 select Input8  
Output 1 select Input previous  
Output 1 select Input next  
Output 2 select Input1  
Output 2 select Input2  
Output 2 select Input3  
Output 2 select Input4  
Output 2 select Input5  
Output 2 select Input6  
Output 2 select Input7  
Output 2 select Input8  
Output 2 select Input previous  
Output 2 select Input next  
Output 1  
<
>
Output 2  
<
>
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
cir 20  
cir 21  
cir 22  
cir 23  
cir 24  
cir 25  
cir 26  
cir 27  
cir 28  
cir 29  
cir 30  
cir 31  
cir 32  
cir 33  
cir 34  
cir 35  
cir 36  
cir 37  
cir 38  
cir 39  
cir 40  
cir 41  
cir 42  
cir 43  
cir 44  
cir 45  
cir 46  
cir 47  
cir 48  
cir 49  
cir 50  
cir 51  
cir 52  
cir 53  
cir 54  
cir 55  
cir 56  
cir 57  
cir 58  
cir 59  
Output 3 select Input1  
Output 3 select Input2  
Output 3 select Input3  
Output 3 select Input4  
Output 3 select Input5  
Output 3 select Input6  
Output 3 select Input7  
Output 3 select Input8  
Output 3 select Input previous  
Output 3 select Input next  
Output 4 select Input1  
Output 4 select Input2  
Output 4 select Input3  
Output 4 select Input4  
Output 4 select Input5  
Output 4 select Input6  
Output 4 select Input7  
Output 4 select Input8  
Output 4 select Input previous  
Output 4 select Input next  
Output 5 select Input1  
Output 5 select Input2  
Output 5 select Input3  
Output 5 select Input4  
Output 5 select Input5  
Output 5 select Input6  
Output 5 select Input7  
Output 5 select Input8  
Output 5 select Input previous  
Output 5 select Input next  
Output 6 select Input1  
Output 6 select Input2  
Output 6 select Input3  
Output 6 select Input4  
Output 6 select Input5  
Output 6 select Input6  
Output 6 select Input7  
Output 6 select Input8  
Output 6 select Input previous  
Output 6 select Input next  
Output 3  
<
>
Output 4  
<
>
Output 5  
<
>
Output 6  
<
>
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
cir 60  
cir 61  
cir 62  
cir 63  
cir 64  
cir 65  
cir 66  
cir 67  
cir 68  
cir 69  
cir 70  
cir 71  
cir 72  
cir 73  
cir 74  
cir 75  
cir 76  
cir 77  
cir 78  
cir 79  
Output 7 select Input1  
Output 7 select Input2  
Output 7 select Input3  
Output 7 select Input4  
Output 7 select Input5  
Output 7 select Input6  
Output 7 select Input7  
Output 7 select Input8  
Output 7 select Input previous  
Output 7 select Input next  
Output 8 select Input1  
Output 8 select Input2  
Output 8 select Input3  
Output 8 select Input4  
Output 8 select Input5  
Output 8 select Input6  
Output 8 select Input7  
Output 8 select Input8  
Output 8 select Input previous  
Output 8 select Input next  
Output 7  
<
>
Output 8  
<
>
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
SAFETY INFORMATION  
Avoid excessive humidity, sudden  
temperature changes or temperature  
extremes.  
Safeguards  
To reduce the risk of electric shock, do not  
expose this product to rain or moisture.  
Keep this product away from wet locations  
such as bathtubs, sinks, laundries, wet  
basements and swimming pools.  
If the wall plug does not fit into your local  
power socket, hire an electrician to replace  
your obsolete socket.  
Use only accessories recommended by  
ATLONA to avoid fire, shock or other  
hazards.  
Do not modify the wall plug.  
Doing so will void the warranty and safety  
features.  
Unplug the product before cleaning. Use  
a damp cloth for cleaning. Do not use  
cleaning fluid or aerosols, which could  
enter the unit and cause damage, fire or  
electrical shock. Some substances may  
also mar the finish of the product.  
This equipment should be installed near  
the socket outlet and the device should  
be easily accessible in case it requires  
disconnection.  
Precautions  
Never open or remove unit panels or make  
any adjustments not described in this  
manual. Attempting to do so could expose  
you to dangerous electrical shock or other  
hazards. It may also cause damage to your  
AT-PROHD88M-SR. Opening the product  
will void the warranty.  
FCC Regulations state that any  
unauthorized changes or modifications to  
this equipment not expressly approved by  
the manufacturer could void the  
user’s authority to operate this  
equipment.  
Do not attempt to service the unit. Instead  
disconnect it and contact your Authorized  
ATLONA reseller or contact ATLONA  
directly.  
Operate this product using only the  
included external power supply. Use of  
other power supplies could impair  
performance, damage the product or cause  
fires.  
In the event of an electrostatic discharge,  
this device may automatically turn off. If this  
occurs, unplug the device, and plug it back  
in.  
Protect and route power cords so they will  
not be stepped on or pinched by anything  
placed on or against them. Be especially  
careful of plug-ins, or cord exit points from  
this product.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
1. LIMITED WARRANTY  
Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the ac-  
companying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from  
defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law  
imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdic-  
tions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.  
2. CUSTOMER REMEDIES  
Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’  
option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this  
Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty  
is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be war-  
ranted for the remainder of the original warranty period or 3 year, whichever is longer.  
3. NO OTHER WARRANTIES  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS  
DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IM-  
PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO  
THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPE-  
CIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.  
4. NO LIABILITY FOR DAMAGES  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALLATLONA TECHNOLOGIES OR  
ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, IN-  
CIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS,  
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING  
OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN AD-  
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS SUPPLIERS’  
ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTU-  
ALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT  
APPLY TO YOU.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
ATLONA PRODUCT REGISTRATION  
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.  
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership  
record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware  
updates.  
At Atlona, we respect and protect your privacy and assure you that your registration information is completely  
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-  
ranty rights.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  

3Com Network Router 59039 2 User Manual
AEG Washer 86810 User Manual
Allstar Products Group Automobile Parts MH5011S User Manual
Alto Shaam Microwave Oven 1767 SK III User Manual
American Audio CD Player DCD PRO500 User Manual
American DJ DJ Equipment 4TM User Manual
ATI Technologies Stereo Amplifier ATP 8500 User Manual
Audiovox Automobile Alarm AA 939 User Manual
Axis Communications Security Camera P5532E User Manual
Barco CRT Television MCFD 1219 MCFD 1219 TS User Manual