Atlona 10 Input Scaler and Switcher
with a Single HDMI Output
AT-LINE-PRO4-GEN2
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The Atlona 10-input Scaler and Switcher with a single HDMI Output allows four HDMI or DVI (using
a HDMI to DVI connector i.e. AT14050), three VGA, one component, one S-Video and one composite
video input to be scaled to a single HDMI output. The AT-LINE-PRO4 also gives you the flexibility to
add PAL or NTSC that may not be native to your display. The on screen display gives you the ability
to change audio, scaling, and resolution options. With additional functions such as RS-232 and IR
control the AT-LINE-PRO4 is easier than ever to control or integrate with a preexisting system.
Package Contents
• AT-LINE-PRO4
• 5V/2.6A DC power adaptor
• IR Remote Control
• Rack Ears
• User manual
Features
• Scaling any incoming Signal whether VGA, Composite, DVI or any other to the native resolution of
the display: VGA(640x480)~WUXGA(1920x1200) or 480p~1080p
• Analog to digital AV conversion
• PAL to NTSC and NTSC to PAL conversion 50/60Hz
• Digital and analog audio capabilities with HDMI out
• RS-232 commands available for control systems
• 3.5mm Stereo Audio out for connecting your audio to an amp (i.e. AT-PA100-G2)
• Learnable IR codes for universal remote controls
• Standard 1U size for easy rack mounting
• 3.5mm Audio jacks for audio embedding on HDMI inputs (Useful for DVI sources when used with
HDMI/DVI adapters)
• Horizontal and vertical shift, color, tint, brightness, contrast, detail, sizing, and top and bottom
vertical blanking adjustments
• VGA Inputs Supports following Resolutions: VGA(640x480) ~WUXGA(1920x1200) or 480p~1080p
• HDMI inputs support following resolutions: 480i~1080p and VGA (640x480)~WUXGA (1920x1200)
• Supports deep color of 8 / 10 / 12 bits per color (x3)
• On-Screen-Display allows users to fully adjust inputs/outputs preferences
• HDCP compliant
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TMDS Clock Frequency
225Mbps
Input Ports
4 x HDMI
7 x 3.5mm stereo audio
3 x VGA
1 x S-Video
1 x Component Video
1 x Composite Video
1 x HDMI
Output Ports
1 x 3.5mm stereo audio port
Video: up to 1080p @ 60Hz
Vesa: up to 1920x1200
17.16 x 6.57 x 1.92 (inch) or 436 x 67 x 49 (mm)
4.6 lbs or 2.1 kg
Resolution outputs
Dimensions (WxDxH)
Weight
Temperature
Operating: 32°F to 104°F or 0°C to 40°C
Storage: -4°F to 140°F or -20°C to 60°C
8.5W
Power consumption
Panel Description
Front Panel
8
9
10
4
5
7
1
2
3
6
1. POWER BUTTON: Press this button to turn on or set the device to standby mode. The LED will
illuminate red when the power is on.
2. IR RECEIVER: This IR window receives IR signal from the remote control included in the package.
3. CV: Press this button to select the composite video input source and the LED will illuminate red.
4. SV: Press this button to select the s-video input source and the LED will illuminate in red
5. COMP: Press this button to select the component video input source and the LED will illuminate
red.
6. VGA 1 through 3: Press VGA1, VGA2, or VGA3 to select input 1, 2, or 3. The LED will illuminate
red.
7. HDMI 1 through 4: Press the HDMI number to choose input 1, 2, 3 or 4. The LED will illuminate
red.
8. MENU: Press this button to bring up the On Screen Display.
9. -/+: Press -/+ buttons to make a selection.
10. ENTER: Press this button to confirm the selection.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel
2
4
8
10
6
1
5
7
9
11
3
1. RS-232: Connect to a 3rd party control system or a computer with this port.
2. 3.5mm Stereo audio out - send stereo audio through to an amp (i.e. AT-PA100-G2)
3. HDMI Out - Connect to a display with HDMI or an HDMI to DVI connector (such as AT14048 which
has a compatible locking connector to secure the connection).
4. 3.5mm Stereo In - Audio in port used for audio when using an HDMI to DVI adapted source.
5. HDMI In - Connect the HDMI sources here or DVI sources with an HDMI to DVI adapter (i.e. AT-14050)
6. VGA In & Stereo In: These slots are for input sources such as Laptops, Desktop Computers,
Document Cameras or any other VGA source. Each VGA input is accompanied with a 3.5mm
stereo audio input.
7. Y/PB/PR & L/R In: This port is to connect an input source such as a DVD player, a Cables Box or an
HD Camera. The input is accompanied with a L/R RCA audio input.
8. COAX: This port is to embed digital audio signal from any source.
9. SV & L/R: These ports are to connect an S-Video source.
10. CV & Stereo In: These ports are to connect to input sources such as VCRs or Security Cameras.
11. DC 5V: This port is to connect to the supplied power supply.
Remote Control
7
1
1. Input Button: Press this before choosing the source to switch to.
2. Source Selection: Press to switch between sources.
3. Exit: Press to exit from a sub menu or main menu.
4. On Screen Display operation. Press to increase/decrease the setting
value of a selected parameter. OK (Enter): Press to confirm your selection.
5. Reset: Press the button to reset the unit’s firmware setting to the factory
default.
6. Output Resolution: Press to directly select output resolution. For other out
put resolutions that are not available on the remote please enter On
Screen Display Menu to select them.
2
8
9
3
4
5
6
7. POWER ON/OFF: Press these buttons to power on the device or to set it
to standby mode.
8. MENU: Press to bring up On Screen Display.
9. Auto Adjust: Press to optimize the position of the picture on the screen.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display Menu
1st Tier Option
Video
2nd Tier Option
Adjustment
PICTURE MODE
CONTRAST
BRIGHTNESS
HUE
USER / STANDARD / VIVID / MOVIE
0 ~ 100 of Contrast Level
0 ~ 100 of Brightness Level
0 ~ 100 of Hue Level
SATURATION
SHARPNESS
SCALE
0 ~ 100 of Saturation Level
0 ~ 100 of Sharpness Level
OVERSCAN / UNDERSCAN / LETTERBOX/
PANSCAN / FULL
NR
LOW / MIDDLE / HIGH / OFF
Back to the 1st Tier
EXIT
COLOR
OUTPUT
OSD
COLOR TONE
RED
USER / NORMAL / WARM / COOL
0 ~ 100 of Red Color Level
0 ~ 100 of Green Color Level
0 ~ 100 of Blue Color Level
Back to the 1st Tier
GREEN
BLUE
EXIT
VGA (640x480)
SVGA (800x600)
XGA (1024x768)
UXGA (1600x1200)
SXGA+ (1400x1050)
HPOSITION
VPOSITION
TIMER
480i
576i
WXGA (1280x800)
WSXGA (1680x1050
WUXGA (1920x1200)
WUXGA+ (1440x900)
1080p@30Hz
480p
576p
720p@60Hz
1080i@60Hz
720p@50Hz
1080i@50Hz
1080p@60Hz 1080p@50Hz
0 ~ 100 of OSD Horizontal Position
0 ~ 100 of OSD Vertical Position
0 ~ 100 of OSD Show Time (sec.)
0 ~ 100 of OSD Transparency Level
BACKGROUND (transparency)
COLOR BAR
On: Color bar will display when the source is
disconnected
Off: After the source is disconnected, a black
screen will be active for 50 seconds before the
output signal is shut off
Timeon 15min: Once the source is
discontinued, a color bar will be active for 15
minutes before the output signal is shut off
EXIT
Back to the 1st Tier
AUDIO
SOURCE
DELAY
SOUND
EXIT
HDMI / L/R / COAXIAL
OFF / 40MS / 110MS / 150 MS
ON / MUTE
Back to the 1st Tier
INFORMATION
EXIT
SOURCE (Input interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
Close the OSD Menu
-
Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection and Installation
Satellite Receiver
Blu-Ray
Laptop
Laptop
VCR
or
or
or
or
Computer
VCR
AT-PA100-G2
Camera
Computer
Projector
RS-232
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions
associated with them, some will be unassigned.
No.
1
Pin
----
Tx
Function
Not used
Transmit
Receive
2
5 4 3 2 1
3
Rx
4
----
Gnd
----
----
----
----
Not used
Ground
5
6
Not used
Not used
Not used
Not used
7
9 8 7 6
8
9
Baud Rate: 19200bps
Data Bit: 8bits
Parity: None
Stop Bit: 1bit
Toll free: 1-877-536-3976
Local: 1-408-962-0515
7
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Command
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Note: Each command and feedback is terminated with a carriage return and linefeed.
Note: If the command fails or is incorrect the feedback should be “Command FAILED”
Set Commands
Command
Feedback
Description
S POWER 0
S POWER 1
S SOURCE 0
S SOURCE 1
S SOURCE 2
S SOURCE 3
S SOURCE 4
S SOURCE 5
S SOURCE 6
S SOURCE 7
S SOURCE 8
S SOURCE 9
S OUTPUT 0
S OUTPUT 1
S OUTPUT 2
S OUTPUT 3
S OUTPUT 4
S OUTPUT 5
S OUTPUT 6
S OUTPUT 7
S OUTPUT 8
S OUTPUT 9
S OUTPUT 10
S OUTPUT 11
S OUTPUT 12
S OUTPUT 13
S OUTPUT 14
S OUTPUT 15
S OUTPUT 16
S OUTPUT 17
S OUTPUT 18
>POWER OFF
Power on
>POWER ON
Power off
>SOURCE CV
Set the input to CV
> SOURCE SV
Set the input to SV
> SOURCE COMP
> SOURCE PC1
> SOURCE PC2
> SOURCE PC3
> SOURCE HDMI1
> SOURCE HDMI2
> SOURCE HDMI3
> SOURCE HDMI4
> OUTPUT NATIVE
> OUTPUT VGA
> OUTPUT SVGA
> OUTPUT XGA
> OUTPUT SXGA
> OUTPUT UXGA
> OUTPUT 480i
> OUTPUT 480p
> OUTPUT 720p
> OUTPUT 1080i
> OUTPUT 1080p
> OUTPUT 576i
> OUTPUT 576p
> OUTPUT 720p
> OUTPUT 1080i50
Set the input to COMP
Set the input to PC1
Set the input to PC2
Set the input to PC3
Set the input to HDMI1
Set the input to HDMI2
Set the input to HDMI3
Set the input to HDMI4
Set the output EDID to native
Set the output EDID to VGA(640X480@60)
Set the output EDID to SVGA(800X600@60)
Set the output EDID to XGA(1024X768@60)
Set the output EDID to SXGA(1280X1024@60)
Set the output EDID to UXGA(1600X1200@60)
Set the output EDID to 480i
Set the output EDID to 480p
Set the output EDID to 720p@60
Set the output EDID to 1080i@60
Set the output EDID to 1080p@60
Set the output EDID to 576i@60
Set the output EDID to 576p@60
Set the output EDID to 720p@50
Set the output EDID to 1080i@50
> OUTPUT 1080p50 Set the output EDID to 1080p@50
> OUTPUT WXGA
> OUTPUT WSXGA
Set the output EDID to WXGA (1280x800@60)
Set the output EDID to WSXGA (1680x1050@60)
> OUTPUT WUXGA Set the output EDID to WUXGA (1920X1200@60)
Toll free: 1-877-536-3976
Local: 1-408-962-0515
8
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Command
S OUTPUT 19
S OUTPUT 20
S SIZE 0
Feedback
Description
> OUTPUT WXGA+
> OUTPUT SXGA+
> SIZE FULL
Set the output EDID to WXGA+(1440X900@60)
Set the output EDID to SXGA+ (1400X1050@60)
Scale to Full Screen output
S SIZE 1
> SIZE OVERSCAN
> SIZE UNDERSCAN
> SIZE LETTERBOX
> SIZE PANSCAN
Scale to Overscan Screen output
Scale to Underscan Screen output
Scale to Letterbox Screen output
Scale to Panscan Screen output
Set picture mode to STANDARD
S SIZE 2
S SIZE 3
S SIZE 4
S PICTUREMODE 0
> PICTUREMODE STAN-
DARD
S PICTUREMODE 1
S PICTUREMODE 2
S PICTUREMODE 3
S CONTRAST 0~100
S BRIGHTNESS 0~100
S HUE 0~100
> PICTUREMODE MOVIE
> PICTUREMODE VIVID
> PICTUREMODE USER
> CONTRAST 0~100
> BRIGHTNESS 0~100
> HUE 0~100
Set picture mode to MOVIE
Set picture mode to VIVID
Set picture mode to USER
Adjust Contrast between 0 and 100
Adjust Brightness between 0 and 100
Adjust Hue between 0 and 100
S SATURATION 0~100 > SATURATION 0~100
Adjust Saturation between 0 and 100
Adjust Sharpness between 0 and 100
Set NR Mode to OFF
S SHARPNESS 0~100
S NR 0
> SHARPNESS 0~100
>NR OFF
S NR 1
>NR LOW
Set NR Mode to LOW
S NR 2
>NR MIDDLE
Set NR Mode to MIDDLE
S NR 3
>NR HIGH
Set NR Mode to HIGH
S PCPHASE 0~63
S PCCLOCK 0~100
> PCPHASE 0~63
> PCCLOCK 0~100
Adjust the PC Phase between 0 and 63
Adjust the PC Clock between 0 and 100
Adjust the Horizontal Position between 0 and 100
Adjust the Vertical Position between 0 and 100
Set Color Temperature to NORMAL
Set Color Temperature to WARM
Set Color Temperature to COOL
Set Color Temperature to USER
Adjust the RED hue between 0 and 100
Adjust the GREEN hue between 0 and 100
Adjust the BLUE hue between 0 and 100
Adjust the OSD Horizontal Position between 0 and 100
S PCHPOSITION 0~100 > PCHPOSITION 0~100
S PCVPOSITION 0~100 > PCVPOSITION 0~100
S COLORTEMP 0
S COLORTEMP 1
S COLORTEMP 2
S COLORTEMP 3
S RED 0~100
>COLORTEMP NORMAL
>COLORTEMP WARM
>COLORTEMP COOL
>COLORTEMP USER
> RED 0~100
S GREEN 0~100
S BLUE 0~100
> GREEN 0~100
> BLUE 0~100
S OSDHPOSITION
0~100
> OSDHPOSITION 0~100
S OSDVPOSITION
0~100
> OSDVPOSITION 0~100
Adjust the OSD Vertical Position between 0 and 100
S OSDTIMEOUT 0~100 > OSDTIMEOUT 0~100
Adjust the OSD Timeout between 0 and 100
S OSDBACKGROUND
> OSDBACKGROUND 0~8 Adjust the OSD Background between 0 and 8
0~8
S AAUD 0
S AAUD X
> AAUD 0
Mute audio
> AAUD 1 ~ 41
Adjust volume level, replace X with 1 through 41
Toll free: 1-877-536-3976
Local: 1-408-962-0515
9
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Command
Feedback
Description
> AUDIODELAY OFF
> AUDIODELAY 40ms
Turn Audio Delay off
Set Audio Delay to 40mSec
S AUDIODELAY 0
S AUDIODELAY 1
S AUDIODELAY 2
S AUDIODELAY 3
> AUDIODELAY 110ms Set Audio Delay to110mSec
> AUDIODELAY 150ms Set Audio Delay to 150mSec
Status Commands
Command
Feedback
Description
>POWER OFF~ON
>SOURCE CV~HDMI4
>OUTPUT NATIVE~SXGA+
>SIZE FULL~PANSCAN
Displays POWER status
Displays SOURCE status
Displays OUTPUT status
Displays SIZE status
R POWER
R SOURCE
R OUTPUT
R SIZE
> PICTUREMODE STANDARD~USER Displays PICTUREMODE status
R PICTUREMODE
R CONTRAST
R BRIGHTNESS
R HUE
> CONTRAST 0~100
> BRIGHTNESS 0~100
> HUE 0~100
Displays CONTRAST value
Displays BRIGHTNESS value
Displays HUE value
> SATURATION 0~100
> SHARPNESS 0~100
> NR OFF~HIGH
Displays SATURATION value
Displays SHARPNESS value
Displays NR status
R SATURATION
R SHARPNESS
R NR
> PCHPOSITION 0~100
> PCVPOSITION 0~100
> PCCLOCK 0~100
> PCPHASE 0~63
Displays PC H-POSITION value
Displays PC V-POSITION value
Displays PC CLOCK value
Displays PC PHASE value
R PCHPOSITION
R PCVPOSITION
R PCCLOCK
R PCPHASE
> COLORTEMP NORMAL~USER
> RED 0~100
Displays COLOR TEMP mode
Displays COLOR RED value
Displays COLOR GREEN value
Displays COLOR BLUE value
Displays OSD H-POSITION value
Displays OSD V-POSITION value
Displays OSD TIMEOUT value
Displays OSD BACKGROUND status
Displays AUDIO MUTE status
Displays AUDIO DELAY status
R COLORTEMP
R RED
> GREEN 0~100
R GREEN
> BLUE 0~100
R BLUE
> OSDHPOSITION 0~100
> OSDVPOSITION 0~100
> OSDTIMEOUT 0~100
> OSDBACKGROUND 0~8
> AUDIOMUTE OFF~ON
> AUDIODELAY OFF~150ms
R OSDHPOSITION
R OSDVPOSITION
R OSDTIMEOUT
R OSDBACKGROUND
R AUDIOMUTE
R AUDIODELAY
Toll free: 1-877-536-3976
Local: 1-408-962-0515
10
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Commands
Command
K POWER
K CV
Feedback
>POWER
> CV
Description
Panel/remote control key POWER
Panel key CV
> SV
Panel key SV
K SV
> COMP
> PC1
Panel key COMP
K COMP
K PC1
Panel key PC1
> PC2
Panel key PC2
K PC2
> PC3
Panel key PC3
K PC3
> HDMI1
> HDMI2
> HDMI3
> HDMI4
> MENU
> DEC
Panel key HDMI1
K HDMI1
K HDMI2
K HDMI3
K HDMI4
K MENU
K DEC
Panel key HDMI2
Panel key HDMI3
Panel key HDMI4
Panel key MENU
Panel key DEC
> INC
Panel key INC
K INC
> ENTER
> SOURCE
> VGA
Panel key ENTER
K ENTER
K SOURCE
K VGA
Remote control key SOURCE
Remote control key VGA
Remote control key SVGA
Remote control key XGA
Remote control key SXGA
Remote control key UXGA
Remote control key 1080i60
Remote control key 480p
Remote control key 720p
Remote control key 1080p60
Remote control key UP
Remote control key DOWN
Remote control key LEFT
Remote control key RIGHT
Remote control key EXIT
Remote control key AUTO
Remote control key RESET
> SVGA
> XGA
K SVGA
K XGA
> SXGA
> UXGA
> 1080i60
> 480p
> 720p60
> 1080p60
> UP
K SXGA
K UXGA
K 1080i60
K 480p
K 720P60
K 1080P60
K UP
> DOWN
> LEFT
K DOWN
K LEFT
> RIGHT
> EXIT
K RIGHT
K EXIT
> AUTO
> RESET
K AUTO
K RESET
Toll free: 1-877-536-3976
Local: 1-408-962-0515
11
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
Do not modify the wall plug. Doing so will
void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment,
not expressly approved by the manufacturer, could void the user’s authority to operate this
equipment.
Operate this product using only the included external power supply. Use of other power
supplies could impair performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed
on or against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements,
fish tanks, and swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or
aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards. It may
also cause damage to your AT-LINE-PRO4-GEN2. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized
Atlona reseller or contact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
12
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Limited Warranty
Atlona Technologies warrants that (a) its products (AT-LINE-PRO4-GEN2) will perform
substantially in accordance with the accompanying written materials for a period of 3 years
from the date of receipt and (b) that the product will be free from defects in materials and
workmanship under normal use and service for a period of 3 years. In the event applicable
law imposes any implied warranties, the implied warranty period is limited to 3 years from
the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied
warranty, so the above limitation may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy
shall be, at Atlona Technologies’ decision, either return of the price paid for the product,
repair, or replacement of the product that does not meet this Limited Warranty and which is
returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty
is void if failure of the product has resulted from accident, abuse, misapplication, or natural
occurrence. In example but not limited to: power surges (electrical storms, local power
outage), dropping the product (or items on the product), contact with fluids, and physical
misconduct (i.e. kicking or punching). Any replacement product will be warranted for the
remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its
suppliers disclaim all other warranties, either expressed or implied, including, but not limited
to, implied warranties of merchantability and fitness for a particular purpose, with regard to
the product and any related written materials. This Limited Warranty gives customer specific
legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona
Technologies or its suppliers be liable for any damages arising out of the use of or inability
to use this product, even if Atlona Technologies has been advised of the possibility of such
damages. Such damages include but are not limited to: special, incidental, consequential,
or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss. Atlona Technologies’ and its suppliers’
entire liability under any provision of this agreement shall be limited to the amount actually
paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of
liability for consequential or incidental damage. The above limitations may not apply to you in
such jurisdictional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
13
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an
extra few moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure
you’ll receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration
information is completely secure. Atlona product registration is completely voluntary and failure
to register will not diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
Local: 1-408-962-0515
14
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|