DIGITAL DELAY DD400
Thank you for showing your confidence in us by choosing the BEHRINGER DIGITAL DELAY
DD400. This ultimate effects pedal is designed to deliver 24-bit high-resolution stereo delay
sounds comparable to state-of-the-art studio processors. Thanks to its parameter controls and
built-intap tempo feature, you’ll have plenty of cool sounds at your disposal to handle every
situation.
The delay effect creates a delay of the input signal with various repetitions. Different tempo
settings allow interesting delay effects.
1. CONTROLS
1
2
5
3
4
7
8
6
Top view
{1} The LEVEL control adjusts the output level.
{2} The FEEDBACK (Feedback) control adjusts the amount of signal repetitions.
{3} The TIME (Delay Time) control adjusts the exact delay time.Depending on the MODE
control position you can adjust it around 200 ms, 500 ms or 1300 ms. The delay time
describes how fast the signal repetitions will follow after the original signal.
{4} With the MODE control you can chose between three different delay time ranges
around 200 ms, 500 ms or 1300 ms with either mono (M) or stereo (S) delay. The exact
delay time can be adjusted by the TIME control. In position HOLD the signal will be
repeated constantly.
{5} The ON/BATT LED illuminates when the effect is activated. It also serves as a battery
level indicator.
{6} Use the footswitch to activate/deactivate the effect. The built-in tap tempo feature is
also accessed through this switch.
•
•
Hold the footswitch down for at least one second and release to enter tap mode. The
LED will blink in rhythm with the current tempo.
Tap the footswitch to the desired tempo. The pedal will measure the time between
the last two taps and automatically employ this as the delay time. The LED will now
flash in rhythm with the new tempo.
•
•
After a few seconds, the unit will automatically exit tap mode and the footswitch can
be used to activate/deactivate the effect again.
Turning the Time knob will override the tapped tempo and the delay will be deter-
mined by the settings of the Mode and Time knobs.
{7} Use this ¼" TS IN connector to plug in the instrument cable.
{8} The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both
connectors if you want to achieve full stereo delay effect. For mono use just plug in
OUT A.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply
(not included).
Download from Www.Somanuals.com. All Manuals Search And Download.
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
DIGITAL DELAY DD400
Responsible party name:
Address:
MUSIC Group Services USA, Inc.
18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.:
Phone: +1 425 672 0816
Fax: +1 425 673 7647
DIGITAL DELAY DD400
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
behringer.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|