American Standard Outdoor Shower 1041229099 User Manual

WILLIAMSBURG  
ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET  
MODEL NUMBER:  
1041.229.099 Pressure Balance Bath/Shower  
2 sets of handles (metal levers and porcelain levers).  
I.P.S. diverter spout. Polished Brass (PVD) finish.  
Hot  
Co  
l
d
Of  
f
1-5/8" TO 3-1/4"  
(41mm TO 83mm)  
FINISHED WALL  
1/2" NPT  
(12,7mm) NPT  
1041.229.099 Shown.  
5" REF.  
(127mm)  
OPTIONAL TO FINISHED FLOOR  
USUALLY BETWEEN 65" AND 78"  
(165cm - 198cm)  
GENERAL DESCRIPTION:  
Cast brass body, washerless ceramic disc valve cartridge with  
back-to-back capability and hot limit safety stop. Cycles from  
off to hot through cold. Pressure balancing cartridge maintains  
constant output temperature in response to changes in relative  
hot and cold supply pressure. One-half inch female I.P.S.  
inlets and outlets. Easy Clean showerhead with 2.5  
gpm/9.5L/min. flow restrictor. Rough-in plaster guard designed  
for use as thin-wall mounting adapter.  
7" REF.  
(178mm)  
"SEE ILLUSTRATION"  
74" FOR HEAD CLEARANCE  
(188cm)  
SHR  
TUB  
7-5/8"  
(194mm)  
PRODUCT FEATURES:  
Cast Brass Valve Body: Durable - Quality that will last a  
lifetime. Ideal material for prolonged contact with water.  
18" OPTIONAL  
(45,7cm)  
4" REF.  
(102mm)  
1/2 NPT  
Ceramic Disc Valve Cartridge: Assures a lifetime of  
smooth handle operation and drip-free performance.  
Pressure Balancing Valve Cartridge: Maintains constant  
output temperature in response to changes in hot and cold supply  
pressure. Diaphragm system engineered to eliminate cross flow  
and spool "thumping". Avoids failure due to mineral deposits -  
ideal for use in hard water  
4"  
5-1/8" REF.  
(130mm)  
(102mm)  
BOTTOM OF TUB  
TOP OF TUB RIM  
Back-to-Back Capability: Hot and cold can be reversed  
quickly and easily.  
INLETS  
5-7/8"  
Adjustable Hot Limit Safety Stop: Limits the amount of  
hot water allowed to mix with cold. Reduces the risk of  
accidental scalding.  
5/8 O.D. FOR 1/2 NOM.  
COPPER SWEAT  
INLETS  
4-1/16"  
(149mm)  
2"  
(51mm)  
ALL CONNECTIONS  
(104mm)  
2"  
(51mm)  
Integral Plaster Guard and Mounting Plate: Plaster  
guard is designed to protect valve during installation and serve  
as a mounting plate for thin-wall installations.  
2"  
SWEAT  
INLETS  
w/STOPS  
2"  
SWEAT  
INLETS  
(51mm)  
No Exposed Screws: Decorative dial plate conceals screws.  
(51mm)  
SUGGESTED SPECIFICATION:  
Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of  
back-to-back installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow  
and avoid failure due to mineral deposits. Shall also feature hot limit safety stop and large "comfort zone" - 20 degrees  
temperature range for at least 45 degrees handle rotation. Fitting shall be American Standard Model # 1041.229.099.  
HD-41  
© 2008 AS America, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Aarrow Fires Stove Gas Stove User Manual
Abocom Network Card DVG 2101S User Manual
Adder Technology Switch AdderLink IP User Manual
American DJ DJ Equipment Flash 1CTM User Manual
Atmel Digital Camera CAMELIACOL 25M User Manual
Audiovox Remote Starter PRO 9051 User Manual
Axis Communications Printer AXIS 5400+ User Manual
Baldor Computer Drive VS1MD User Manual
Behringer Stereo Equalizer FBQ6200 FBQ3102 FBQ1502 User Manual
Beko Iron BKK 2132 K User Manual