American Standard Indoor Furnishings 0410021 User Manual

ELLISSE PETITE™  
COUNTERTOP SINK  
VITREOUS CHINA  
BARRIER FREE  
ELLISSE PETITE™ COUNTERTOP SINK  
• Petite stylish countertop sink made from  
vitreous china  
• Self-rimming with cutout template supplied  
• Rear overflow  
• Large deck area  
Shown with 8871.802 Amarilis faucet with  
Fabian handles (not included)  
0411.039 Faucet holes on 8" (203mm) centers  
(illustrated)  
0410.021 Faucet holes on 4" (102mm) centers  
0411.047 Center hole only  
Nominal Dimensions:  
610 x 467mm  
(24" x 18-3/8")  
610mm  
(24)  
51mm  
(2)  
203mm  
(8)  
OPTIONAL  
38mm  
(1-1/2)  
70mm  
(2-3/4)  
FINISHED  
WALL  
Bowl sizes:  
457mm (18") wide  
191mm  
(7-1/2)  
OR  
SPLASH BACK  
305mm (12") front to back  
165mm (6-1/2") deep  
203mm  
(8)  
MIN.  
467mm  
(18-3/8)  
848mm  
(33-3/8)  
Compliance Certifications -  
Meets or Exceeds the  
Following Specifications:  
• ASME A112.19.2M for  
Vitreous China Fixtures  
686mm  
(27)  
MIN.  
610mm  
(24)  
152mm  
(6)  
MAX.  
COUNTERTOP (BY OTHERS)  
29mm  
(1-1/8)  
16mm  
(5/8)  
BARRIER FREE  
CLEARANCE  
229mm  
(9)  
200mm  
(7-7/8)  
*
273mm  
(10-3/4)  
MIN.  
337mm  
*
(13-1/2)  
178mm  
(7)  
203mm  
(8)  
SUPPLIES  
AS REQ'D  
787mm (31)  
848mm (33-3/8)  
To Be Specified:  
Color: White Bone  
Linen Silver  
Fawn Beige  
Black  
1-1/4 O.D.  
WASTE  
FINISHED  
FLOOR  
1-1/4 O.D.  
TAILPIECE  
Faucet*:  
Faucet Finish:  
Supplies:  
1-1/4" Trap:  
* See faucet section for additional models available  
NOTES:  
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP  
*
ARE SUGGESTED.  
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE  
TEMPLATE SUPPLIED WITH SINK.  
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED  
SEPARATELY.  
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES  
AND ANSI A117.1 ACCESSIBLE AND USABLE  
SEALING COMPOUND SUPPLIED BY OTHERS.  
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.  
Install lavatory 864mm (34") from finished floor.  
Lavatory installed 51mm (2") minimum from front edge  
of countertop provides 686mm (27") knee clearance area.  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the  
range of tolerances established by ANSI Standard A112.19.2.  
These measurements are subject to change or cancellation. No responsibility  
is assumed for use of superseded or voided pages.  
J24  
© 2008 AS America Inc.  
Revised 2/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Abocom Switch FT128MX User Manual
ADC Switch Radiator II User Manual
Agilent Technologies Video Gaming Accessories Agilent E3614A Serials KR83503035 User Manual
Aiphone Intercom System AT 306 User Manual
Airflow Systems Carbon Monoxide Alarm IAQ50 User Manual
AKG Acoustics Headphones K 701 User Manual
Alienware Personal Computer Hangar18 User Manual
Altinex Switch MT105 100 User Manual
Alto Shaam Oven 2020ES User Manual
Beko Refrigerator CF6914 W User Manual