Installation
Instructions
T038.990
DECK MOUNT
TUB FILLERS
TROPIC DIVERTER & PERSONAL
SHOWER TRIM KITS
with EverClean™ Finish
Congratulations on purchasing your American Standard
faucet with EverClean finish found only on American
Standard faucets.
Certified to comply with ANSI A112.18.1
U.S. Patent No. D403,750
EverClean Finish
• One wipe effortlessly removes spots
M968897
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
INSTALL HANDLE ADAPTER
1
3
5
2
Remove DIVERTER GUARD (1) from valve.
Place the ESCUTCHEON SEAL (7) into groove of DECK ADAPTER (2).
Align the HANDLE STEM (3) with the SLEEVE (4) as necessary.
1
GROOVE
Thread the HANDLE ADAPTER (5) into the VALVE BODY (6) until
the DECK ADAPTER (2) contacts tight against the finished
mounting surface.
7
4
6
INSTALL HANDLES
2
Push ADAPTER (1) on VALVE STEM (2), so that
the hole of the ADAPTER (1) without a spline is
facing up. Fig. A. Tighten STEM SCREW (3) to
secure ADAPTER (1).
THREAD ON
TO DECK
ADAPTER
4
Find correct position of LEVER HANDLE ASSEMBLY (4)
by adjusting male teeth on ADAPTER (1) to female teeth
in HANDLE (4).
TOP
1
3
Thread LEVER HANDLE ASSEMBLY (4) onto DECK
ADAPTER (5) until snug against mounting surface.
2
5
SPLINE END DOWN
Fig. A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|