Operating Instructions
®
4295 Charter Street
Los Angeles Ca. 90058
Revised 02/02
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CAUTIONS REGARDING HANDLING....................................................................................................4
PRODUCT INFORMATION.....................................................................................................................6
CUSTOMER SUPPORT..........................................................................................................................7
FEATURES..
...............................3
FUNCTIONS AND CONTROLS..............................................................................................................9
BASIC OPERATION
LOADING/EJECTING DISC.......................................................................................................13
STARTING/STOPPING PLAYBACK..........................................................................................14
FRAME SEARCH.......................................................................................................................15
ADJUSTING TIME DISPLAY
.............................................16
SETTING CUE POINTS............................................................................................................18
CREATING LOOPS
......................................................18
PROGRAMMING AND PROGRAM PLAY...................................................................................19
SHUT DOWN PROCEDURES .........................................................20
WARRANTY....................................
SPECIFICATIONS
..............................................................23
.....................................................................24
MAIN FEATURES
• 8 times over sampling 1 bit D/A converter
• Front Loading CD System
• 10 Digit Liquid Crystal Display
• 5 LED Indicator System
• +/- 12% Pitch Range
• +/- 16% Pitch Bend
• + 10 Track Skip Search
• Single Rackmount unit
• 1/75th second frame search
• Jog Wheel for frame search
• Jog Shuttle for fast search
• 8 different speed scan (4 Forward/4 Reverse)
• Pitch display
• Digital RCA coaxial output
• Large bright Digital Screen can be viewed from wide angles.
• Loop
• Pitch Percentage Display
• 30 Track Programmable
• Instant Start within 10 ms (sound is produced immediately when the PLAY button is pressed)
©American Audio®
-
-
SCD-100™ Instruction Manual Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL SAFETY PRECAUTIONS
CAUTION: TO PREVENT ELECTRIC SHOCK
DO NOT USE THIS (POLARIZED) PLUG WITH
AN EXTENSION CORD, RECEPTACLE, OR
OTHER OUTLET UNLESS THE BLADES CAN
BLADE EXPOSURE
NOTE: This CD player uses a semiconductor
the following temperature: 41˚F - 95˚F / 5˚C -
CAUTION:
1. Handle the power supply cord carefully. Do
not damage or deform; it may cause electric
shock or malfunction when used. Hold plug
attachment when removing from wall outlet.
Do not pull on the cord.
To avoid electric shock, do not open the
top cover when the unit is plugged in. If
problems occur with the unit, call your local
®
ELECTRIQUES NE PAS UTILISER CETTE
GATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF
FOND SANS EN LAISSER AUCUNE PARTIE A
3. Do not place metal objects or spill liquid
inside the CD player. Electric shock or mal-
function may occur.
The serial and model number for this unit is
located on the rear panel. Please write down
the numbers here and retain for future refer-
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference
in a residential installation. This equipment
generates, uses, and can radiate radio fre-
quency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
Model No._____________________________
Serial No._____________________________
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
– Reorient or relocate the receiving antenna.
Increase the separation between the equip-
Connect the unit into an electrical outlet on
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
THE COMPACT DISC PLAYER SHOULD NOT
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product'senclosurethatmaybeofsufficientmagnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE REFER SERVICE TO YOUR AUTHORIZED
AMERICAN AUDIO� SERVICE TECHNICIAN.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS � All the safety and operating
GROUNDING OR POLARIZATION
OBJECT AND LIQUID ENTRY - Never push objects of
instructions should be read before the product is
operated.
"
Ifthisproductisequippedwithapolarizedalternating
current line plug (a plug having one blade wider than
theother), itwillfitintotheoutlet onlyoneway. This
isasafetyfeature.Ifyouareunabletoinserttheplug
fullyintotheoutlet, tryreversingtheplug. Iftheplug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
RETAIN INSTRUCTIONS — The safety and operating
instructionsshouldberetainedforfuturereference.
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS � All operating and use
instructions should be followed.
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
CLEANING � The product should be cleaned only with
a polishing cloth or a soft dry cloth. Never clean with
furniture wax, benzine, insecticides or other volatile
liquids since they may corrode the cabinet.
"
If this product is equipped with
a
three-wire
DAMAGEREQUIRINGSERVICE - Unplugthisproduct
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
groundingtypeplug,aplughavingathird(grounding)
pin, itwillonlyfitintoagroundingtypepoweroutlet.
Thisisasafetyfeature.Ifyouareunabletoinsertthe
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
•
"
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into
the product.
ATTACHMENTS
�
Do not use attachments not
recommendedbytheproductmanufacturerasthey
may cause hazards.
WATER AND MOISTURE � Do not use this product
near water — for example, near a bathtub, wash
bowl,kitchensink,orlaundrytub;inawetbasement;
or near a swimming pool; and the like.
ACCESSORIES � Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
"
"
If the product has been exposed to rain or water.
Iftheproductdoesnotoperatenormallybyfollowing
theoperatinginstructions.Adjustonlythosecontrols
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
POWER-CORD PROTECTION - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs,conveniencereceptacles,andthepointwhere
they exit from the product.
OUTDOOR ANTENNA GROUNDING � If an outside
antennaorcablesystemisconnectedtotheproduct,
be sure the antenna or cable system is grounded so
astoprovidesomeprotectionagainstvoltagesurges
andbuilt-upstaticcharges.Article810oftheNational
ElectricalCode,ANSI/NFPA70,providesinformation
with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirementsforthegroundingelectrode.SeeFigure
A.
LIGHTNING � For added protection for this product
duringalightningstorm,orwhenitisleftunattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES �An outside antenna system should
notbelocatedinthevicinityofoverheadpowerlines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING � Do not overload wall outlets,
extensioncords,orintegralconveniencereceptacles
as this can result in a risk of fire or electric shock.
"
If the product has been dropped or damaged in any
way.
with
a
cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
•
When the product exhibits a distinct change in
performance — this indicates a need for service.
REPLACEMENT PARTS -- When replacement parts
arerequired,besuretheservicetechnicianhasused
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorizedsubstitutionsmayresultinfire,electric
shock, or other hazards.
SAFETY CHECK - Upon completion of any service or
repairs to this product, ask the service technician to
performsafetycheckstodeterminethattheproduct
is in proper operating condition.
CART � A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
WALL OR CEILING MOUNTING � The product should
not be mounted to a wall or ceiling.
HEAT —The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
VENTILATION � Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
POWER SOURCES —This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
LOCATION – The appliance should be installed in a
stable location.
NONUSE PERIODS – The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
©American Audio®
-
-
SCD-100™ Instruction Manual Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT INFORMATION
I. Read Instructions - All the safety and operat-
ing instructions should be read before the CD
Player is operated. The safety and operating
instructions should be saved for future
• The SCD-100 is designed to operate in
either a 120 volts or 220 volts environment.
• Before changing the operating voltage
voltage be sure main power is disconnect-
ed.
• The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear
panel (using a flat head screw driver).
• Do not force the VOLTAGE SELECTOR
switch as this may cause damage
not move smoothly, please contact a quali-
2. Heed Warnings - All warnings on the CD
Player and in the operating instructions
should be adhered to.
3. Water and Moisture - The player should not
be used near water - for example, near a
bath tub, kitchen sink, laundry tub, in a
wet basement or near a swimming pool, etc.
4. Ventilation - The CD Player should be situated
so that its location or position does not inter-
fere with its proper ventilation. For example,
the CD player should not be situated on
a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in
a built-in installation, such as a bookcase
or cabinet that may impede the flow of
air through the ventilation openings.
CLASS
1
LASER PRODUCT
1998.01.12
LASER KLASSE
1
5. Heat - The CD player should be situated
away from heat sources such as radiators,
heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
VOLTAGE SELECTOR SWITCH
6. Power Sources - The CD player should be
connected to a power supply only of the
type described in the operating instructions
or as marked on the CD Player.
The SCD-100™ carries a TWO year (730 days)
limited warranty. This warranty covers parts
and labor. Please fill out the enclosed warranty
card to validate your purchase. All returned
service items whether under warranty or not,
must be freight pre-paid and accompany a
return authorization (R.A.) number. The R.A.
number must be clearly written on the outside
of the return package. A brief description of
the problem as well as the R.A. number must
also be written down on a piece of paper and
included in the shipping container. If the unit
is under warranty, you must provide a copy of
your proof of purchase invoice. You may obtain
a R.A. number by contacting customer support
7. Servicing - The user should not attempt
to service the CD Player beyond that
described in the operating instructions. All
other servicing should be referred to quali-
fied service personnel. The Player should be
servicedbyqualifiedservicepersonnelwhen:
A. The power-supply cord or the plug has
been damaged.
B. Objects have fallen, or liquid has been
spilled into the CD Player.
C. The CD Player has been exposed to
rain or water.
D. The CD Player does not appear to
operate normally or exhibits a marked
change in performance.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING
Every SCD-100™ has been thoroughly tested and has been shipped in perfect operating condition.
Carefully check the shipping carton for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your CD player for any damage and be sure all equipment
necessary to operate the CD player has arrived intact. In the event damage has been found or parts
are missing, please contact our toll free customer support number for further instructions. Please do
not return the CD player to your dealer without first contacting customer support.
INTRODUCTION
Introduction:
Congratulations and thank you for purchasing the American Audio® SCD-100™ CD player. This CD
player is a representation of American Audio’s continuing commitment to produce the best and high-
est quality audio products possible at an affordable price. Please read and understand this manual
completely before attempting to operate your new CD player. This booklet contains important informa-
tion concerning the proper and safe operation of your new CD player.
Customer Support:
American Audio® provides a toll free customer support line, to provide set up help and answer any
question should you encounter problems during your initial set up or operation. You may also visit us
through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time.
Fax:
(800) 322-6337
(323) 582-2610
Caution! There are no user serviceable parts inside this CD player. Do not attempt any repairs your-
self, without being instructed to do so by an authorized American Audio service technician. Doing so
will void your manufactures warranty. In the unlikely event your CD player may require service, please
contact American Audio® customer support.
Do not discard the packing carton in the trash. Please recycle when ever possible.
SET-UP PRECAUTIONS
Please be sure to make any connections before plugging the CD player in to an electrical outlet. All
fader and volume controls should be set to zero or minimum position, before the CD player is switched
on. If the CD player has been exposed to drastic temperature fluctuation (e.g. after transportation),
do not switch on the CD player immediately. The arising condensation of water might damage your
device. Leave the device switched off until it has reached room temperature.
Operating Determinations:
• When installing this CD player, please make sure that the device is not exposed or will not be
exposed to extreme heat, moisture or dust!
• Do not operate the CD player in extremely hot (more than 30°/100°F) or extremely cold (less than
5°C/40°F) surroundings.
• Keep the unit out of direct sunlight and away from heaters.
• Operate the CD player only after becoming familiar with its' functions. Do not permit operation by
persons not qualified for operating the unit. Most damages are the result of unprofessional operation.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
SET-UP
1. Checking the Contents
Be sure your SCD-100™ package was shipped with the following:
1) SCD-100™ Professional Rackmount Single CD Player
2) User Manual (this booklet)
3) Stereo Pair of RCA Cables
4) Warranty Card
2. Installing the Units
1) The SCD-100 is designed to placed on a flat level surface or installed into a standard 19”
rack mount case or enclosure. When mounting the SCD-100 in a 19” rack be sure to support
the unit by all four screw slots on the face of the unit.
2) Be sure the player is mounted in a well ventilated area where it will not be exposed to direct
sunlight, high temperatures, or high humidity.
3) Try to place the unit as far as possible from TV’s and tuners, as the unit may cause undesir-
able interference with such devices.
3. Connections
1) Be sure the power is disconnected.
2) Connect the included RCA cable from your SCD-100™ outputs to the inputs on your mixer.
3) Use the Digital Output to connect to MiniDisc, DAT machines, or other device that accepts
digital inputs.
CAUTION:
To avoid sever damage to the unit, be sure the power is off when making connections to the unit.
CAUTION:
• The player will work normally when the main unit is mounted with the front panel within 15
degrees of the vertical plane If the unit is tilted excessively, disks may not be loaded or unloaded
properly. (Figure 1)
Figure 1
• The LCD is designed to be clearly visible within the angles shown in Figure 2. Mount the control
unit so that the visual angle is within this range.
Figure 2
©American Audio®
-
-
SCD-100™ Instruction Manual Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND CONTROLS
TRACK
M
S
F
COMPACT
DIGITALAUDIO
1
BIT
8
TIMES OVERSAMPLING D/A CONVERTERMCPOACT DISC PLAYER
ON
OFF
CLASS 1
LASER PRODUCT
1998.01.12
LASER KLASSE 1
28
25 26
27
ELAPSED
R E M A I N
S I N G L E
CONTINU
TRACK
M
S
F
29
30
31 32 33 34 35 36 37 38
A. FRONT CONTROLS (FIGURE 3)
drive mechanism is in “Pause” or “Cue” mode to
prevent accidentally stopping the music during
playback.
1. TRANSPORT TRAY - This tray is used to load
and unload compact disc’s into the drive mecha-
nism. The tray is opened and closed by pressing
the OPEN/CLOSE BUTTON (2). Never attempt to
force the transport tray open or closed when the
power is turned off.
The time button is used to changed the
way the time values are displayed in the LCD (4).
The time value can be displayed as elapsed track
time or remaining track time.
2. OPEN/CLOSE (TRANSPORT TRAY OPEN/
CLOSE) - This button is used to open and close
the transport tray. NOTE: The TRANSPORT TRAY
(1) will not open when a CD is insert, unless the
4. LIQUID CRYSTAL DISPLAY (LCD) - This high
quality LCD Indicates all the unit functions (play,
pause, cue, etc..,), as they occur as well as dis-
©American Audio®
-
-
SCD-100™ Instruction Manual Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND CONTROLS
playing the time and track values. This display
is viewable at several comfortable angles as
described on pages 11 and 12. The LCD symbols
point or find a particular starting point.
tary pitch bend during playback. Turning the
wheel clockwise will increase the pitch per-
centage up to 16%, and turning the wheel in
the counterclockwise direction will decrease
the pitch percentage up to -16%. The pitch
bend will be determined on how fast you
5. SGL - This button allows the unit's play mode
to change between Single and Continuous. In
single mode the unit will play a single track and
return to cue mode. In continuous mode the unit
continues to play track by track and returns to
cue mode after all tracks have played. This func-
tion also operates in program modes. In program
mode the continuous function will play all tracks
in a program, than return to cue mode on the first
track in the program.
14.
TRACK BUTTON - This buttons is
used to select a track. Tapping this button will
back-skip to the previous track, holding down
this button will rapidly back-skip through the
6. PROG. - (Program Button) This button is used
to enter Program Mode. The word “PROGRAM”
LCD DISPLAY (4)
Program Mode is activated. For programming
information see “Programming” on page 19.
15. CUE LED - This LED will glow when the unit
is in CUE mode. The LED will also flash every
time a new CUE POINT is set. See CUE on page
18.
Pressing the CUE button during play-
back immediately pauses playback and returns
the track to the last set cue point (see setting a
CUE POINT, page 18). The red CUE LED (15)
glow when the unit is in cue mode. The LED will
also flash every time a new CUE POINT is set.
7. PROGRAM LED - This LED will glow while
programming or when the unit is playing in pro-
gram mode. See Programming on page 19.
8. LOOP LED - This LED will glow when the unit
is in loop mode. See Looping on page 18.
17. + 10 - This button instantly advances the
track selection by 10. For example if the unit
is cued on track one, pressing this button will
instantly advance to and cue track 11. If the but-
ton is pressed once more the unit will advance to
and cue track 21.
9. LOOP BUTTON - This button is used to acti-
vate a loop. See Looping on page 18.
10. PITCH LED - This LED will glow when the
pitch function is activated. See PITCH on page
11. POWER SWITCH - This switch is used to
control the unit's main power.
Each press of the
PLAY/PAUSE Button causes the operation to
change from play to pause or from pause to play.
While in play mode the green play LED will glow,
and while in pause mode the green play LED will
flash.
12. SHUTTLE WHEEL - (OUTER RING)
outer wheel of the jog shuttle is used as a fast
four reverse speed positions for speed searching
through tracks. The more you turn the wheel in
either direction, the faster you search.
While in play mode the green
play LED will glow, and while in pause mode the
green play LED will flash.
13. JOG WHEEL - (INNER WHEEL) The inner
wheel of the jog shuttle is serves two functions
depending on the current operating mode:
20.
TRACK BUTTON - This buttons is
used to select your desired track. Tapping this
button will forward skip to the next track, holding
down this button will rapidly forward skip through
the tracks on your CD.
A. The jog wheel will act as a slow frame
search control when the unit is in pause or
cue mode allowing you to set a specific cue
©American Audio®
-
-
SCD-100™ Instruction Manual Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND CONTROLS
another music source. By changing the pitch of
one disc with respect to the other in this way, the
21. (-) PITCH BEND - The (-) pitch bend function
creates a momentary “Slow Down” in the CD’s
pitch speed (Beats per minute - BPM) when the
PITCH (23) function is activated. This functions
allows the beats between two CD’s or any other
music source to match. This is a momentary
function. When the button is depressed the pitch
speed will automatically return to
ER'S (24) selected pitch. Holding down this but-
ton will give a maximum of -12% pitch. Be sure
to remember that this function is a momentary
pitch adjust-ment, for a more precise adjustment
PITCH SLIDER'S (23)
with another playing music source.
25. VOLTAGE SELECTOR - Because power
supplies vary from location to location a voltage
selector switch has been incorporated in the unit's
design. This switch can select a voltage input of
120v or 220v to accommodate the two major
power source. Always be sure to disconnect the
power plug before changing the voltage.
26. POWER CORD - This is the main power
connection. The power cord is polarized and is
designed to fit in the socket one way. Do not
attempt to force the cord in to a socket if it does
not fit. If the cord does not fit one way, try flipping
it over. Also, be sure the local power matches the
unit’s required power.
22. (+) PITCH BEND - The (+) pitch bend function
creates a momentary “BUMP” in the CD’s pitch
speed (Beats per minute - BPM) when the PITCH
(23)
the beats between two CD’s or any other music
source to match. This is a momentary function.
When the button is depressed the pitch speed
will automatically return to PITCH SLIDER'S (24)
selected pitch. Holding down this button will give
a maximum of +12% pitch. Be sure to remember
that this function is a momentary pitch adjust-
ment, for a more precise adjustment use the
PITCH SLIDER'S (24) to match the BPM’s with
another playing music source.
This jack sends a digital
stereo out signal. Use this connection to create
near perfect copies of your disc to a Mini disc,
CD-R, or any other recording device with a digital
input.
These jacks are used to
send a left and right output signal. Use these jacks
to send an audio signal to a mixer or receiver. The
red colored jack represents the right channel out-
put and white jack represents the left channels
output. Used together these signal reproduce a
stereo signal.
23. PITCH BUTTON - This button is used to turn
the pitch function on and off. The pitch func-
BUTTONS (21 & 22) and JOG WHEEL (13) will not
function without this function being activated.
This double digit indi-
cator details a current track. The number dis-
played in the track indicator is a direct reference
to a track being selected for programming or a
track in play, pause, or cue mode.
This slider is used to adjust
the playback pitch percentage when the PITCH
(23)
adjustment and will remain set until the pitch slid-
PITCH (23)
turned off. This adjustment can be made with or
without a CD in the drive. The pitch adjustment
will remain even if a disc has been remove, and
will reflect on any other disc loaded into the unit.
That is to say, if you set a +2% pitch on one disc,
remove that disc and insert another, that disc too
will have a +2% pitch. The amount of pitch being
applied will be displayed in the LCD (4)
This meter will display
the elapse, or remaining time in minutes. The dis-
play time will be indirect reference to the current
31. SECONDS METER - This meter will display
the elapse, or remaining time in seconds. The
display time will be indirect reference to the cur-
rent time mode.
This meter will display the
©American Audio®
-
-
SCD-100™ Instruction Manual Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND CONTROLS
elapse, or frames. The displayed frames will be
indirect reference to the current time mode.
This bar visually
details the time defined in the TIME METER (30,
31, & 32). TIME METER (30, 31, &
32), this bar is also dependent on the selected
time function (REMAIN (37) OR ELAPSE (34). This
bar will begin to flash when 15 seconds of a track
remain and will begin to rapidly flash when three
seconds of a track remain. The flashing bar is a
great visual reminder a track is about to end. The
flashing bar will function regardless of which time
34.ELAPSE INDICATOR - This indicator is in
TIME METER (30, 31, &
32). When the Elapse indicator is displayed in the
LCD, the time defined will refer to a single track's
elapsed time. The time mode is changed by the
tapping on the TIME BUTTON (3)
unit is in continuous play mode. In continuous
mode the drive will play through all the tracks on
will return to cue mode. If the CONTINUE indica-
tor is not displayed the unit is in single play mode
and the SINGLE indicator will glow.
36. SINGLE INDICATOR - This indicates the unit
is in single play mode, the unit will play a single
track and return to CUE mode. If the SINGLE
indicator is not displayed the unit is in continuous
mode and the CONTINUE indicator will glow.
37. REMAIN INDICATOR - This indicator is in
TIME METER (30, 31, &
32). When the REMAIN indicator is displayed in
LCD (4), the time defined will refer to a single
track's remaining time. The time mode is changed
by tapping on TIME BUTTON (3).
This meter displays the
pitch percentage being applied to playback by
PITCH SLIDER (24). If this meter displays
zero and the PITCH SLIDER'S (24) is not set to
the zero position, the PITCH (23) function is not
©American Audio®
-
-
SCD-100™ Instruction Manual Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
1. OPENING AND CLOSING THE DISC TRAY
This is an electronic operation and can only work when the power is on. Press the OPEN/CLOSE BUTTON (2)
to open or close the disc tray. Pressing the PLAY/PAUSE BUTTON (18), will also automatically close the tray if
it is open and immediately cue any CD that is in it. If the transport tray is left open for more than 60 seconds it
will close automatically to prevent accidental damage to the transport. Again if a CD is left in the transport tray
it will immediately cue to the first song. The disc trays cannot be opened during playback to prevent playback
from being interrupted if the OPEN/CLOSE BUTTON (2) is pressed accidentally. Stop playback, then press the
OPEN/CLOSE BUTTON (2)
TRACK
M
S
F
COMPACT
DIGITALAUDIO
BIT T8IMES OVERSAMPLING D/A CTONRVCEORMAPCTDISC PLYAER
1
E
ON
OFF
The SCD-100 can play both 3 inch (8 cm) and 5 inch (12 cm) compact discs (CD’s). Odd shaped and oval
CD’s are not compatible. When loading a CD into the unit always hold the disc by its' edges and place it in
the disc tray. Never touch the signal surface (the glossy side). When using 5 inch/12 cm discs, place the disc
in the outer tray guides (figure 7), and when using 3 inch/8 cm discs, place them securely in the inner guides
(figure 8).
CAUTION:
• NEVER insert any foreign objects in the disc tray.
• NEVER attempt to insert more than one disc in the disc tray at a time. Doing so may result in severe
damage to the unit.
force the transport tray open or closed when the power is off, as this may result in malfunction
and damage the transport system.
Figure 8 - 3 in. / 8cm disc
Figure 7 - 5 in. / 12cm disc
3. SELECTING TRACKS
Select a desired track by using either of the two TRACK BUTTONS (14 & 20) Tapping the TRACK BUTTONS
(14 & 20) once will select either a higher or lower track. You may hold down the TRACK BUTTONS (14 & 20) to
change tracks continuously at a higher speed. If you are using the TRACK BUTTONS (14 & 20)
track during playback (a track already playing) the new track you selected will immediately begin playback as
soon as the search operation is completed.
TRACK
M
S
F
COMPACT
DIGITALAUDIO
BIT T8IMES OVERSAMPLING D/A CTONRVCEORMAPCTDISC PLYAER
1
E
ON
OFF
Figure 8
©American Audio®
-
-
SCD-100™ Instruction Manual Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
4. STARTING PLAYBACK
Insert an audio CD as describe on the previous page (LOADING DISCS). Pressing the PLAY/PAUSE BUTTON
(18) with an audio CD inserted will immediately start playback. The point at which playback starts (cue point)
will automatically be stored in the memory as the cue point. The unit will return to this cue point (the point at
which playback started) when the CUE BUTTON (16) is pressed.
TRACK
M
S
F
COMPACT
DIGITALAUDIO
1
BIT T8IMES OVERSAMPLING D/A CTONRVCEORMAPCTDISC PLYAER
E
ON
OFF
5. STOPPING PLAYBACK
Stopping playback will not stop the drive mechanism, but merely pause or cue the track. There are two ways
to stop playback:
Pausing temporarily stops playback. Pressing the PLAY/PAUSE BUTTON (18) changes the operating mode
between play and pause. The PLAY/PAUSE LED (19) will flash repeatedly when pause mode is activated or
when a track is in cue mode.
TRACK
M
S
F
1) Press the PLAY/PAUSE BUTTON (18)
during playback to pause at that point.
TRACK
M
S
F
CUE BUTTON (16) during
playback to return the track to it’s last
cue point.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
7. AUTO CUE
”Cueing” is the action of preparing for playback. When the unit is in cue mode the CUE LED (15) will flash
repeatedly. The unit is designed to automatically cue at the first audible signal on the first of a disc when a
disc is inserted. If a track is selected before a disc is inserted, the unit will automatically cue to the first audible
signal for the selected track.
This feature allows you to scroll through a track to set a cue, or
Figure 9
loop point. To use the scroll function you must first be in Pause
Mode or Cue Mode. Once you are in Pause or Cue mode, use
your finger tip to turn the JOG WHEEL (13) to scroll through
TRACK
M
S
F
the track (figure 9). Turning the wheel in a clockwise direc-
tion will advance the frame search and turning the wheel in a
counter-clockwise direction rewinds the frame search. When
you use the JOG WHEEL (13) the monitor (headphone level)
of a mixer allows you to here what you are scrolling through.
Once you reach your desired starting point you can set a cue
(starting) point by pressing the PLAY/PAUSE BUTTON (18) as
in figure 9. Pressing the CUE BUTTON (16) will return the disc
to the cue point just set.
9. SCANNING (FAST FORWARD / FAST
REVERSE)
TRACK
M
S
F
This function gives you a fast search through a disk or
track. To do this turn SHUTTLE WHEEL (12) in clock-
fast reverse. You can scan in 4 different forward and 4
different reverse speeds depending on how much you
rotate the wheel.
Figure 10
©American Audio®
-
-
SCD-100™ Instruction Manual Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
10. CHANGING THE TIME DISPLAY (30, 31, & 32)/TIME BAR (33):
The time may be displayed in three different modes; Elapsed and Remain. During normal playback, pressing
the TIME BUTTON (3) as in figure 11, will change the time display information (30, 31, 32, & 33) in the LCD.
The following is a break down of the time settings and their definitions:
1) ELAPSED (34) - This details the time in the LCD (30, 31, & 32) as the current tracks’ elapsed running time.
The elapsed function only details a tracks elapsed time and not the entire disc.
2) REMAIN (37) - This details the time in the LCD (30, 31, & 32) as the current tracks’ remaining running time.
TIME BAR INDICATOR - The time bar in the LCD visually details the time defined in the TIME METER (30, 31,
& 32). This bar is also dependent on the selected time function; REMAIN (37) or ELAPSE (34)
begin to flash when 15 seconds of a track remain and will begin to rapidly flash when three seconds
of a track remain. The flashing bar is a great visual reminder a track is about to end. The flashing bar
will function regardless of which time mode the unit is in.
TRACK
M
S
F
Figure 11
11. PITCH ADJUSTMENTS
This function will increase or decrease the playback speed or "PITCH," of a track. The maximum pitch bend
percentage allowed is +/-12%. The PITCH SLIDER (24) is used to decrease or increase the playback pitch. If
the slider is move up (towards the top of the unit) the pitch will decrease, if the slider is moved down (towards
the bottom of the unit) the pitch will increase.
To activate the PITCH SLIDER (24), you must turn the
TRACK
M
S
F
pitch function on. Press the PITCH BUTTON (23) to turn
on the pitch function, when the pitch function is activated
the PITCH LED (10) will begin to glow. If the pitch function
PITCH SLIDER (21)
Figure 12
To use the PITCH SLIDER
(24) slide the slider up and down. Down will increase the
pitch and up will decrease the pitch. When the slider is in the
center position, there is zero pitch being applied to a track.
TRACK
M
S
F
Figure 13
Figure 14
©American Audio®
-
-
SCD-100™ Instruction Manual Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
12. PITCH BEND
This function will momentarily increase or decrease a tracks playback speed using the (-) & (+) PITCH BUT-
TONS (21 & 22) The maximum pitch bend percentage allowed is +/-16%. The pitch bend function will work
in conjunction with the PITCH SLIDER (24) pitch setting. For example, if the PITCH SLIDER (24) is set to a 2%
pitch gain the pitch bending process will begin at 2% and will continue to the maximum of -/+16%.
PITCH BEND BUTTONS (21 & 22)
The (+) PITCH BEND BUTTON (22) will provide a speed bump and the (-) PITCH BEND BUTTON (21) will pro-
vide a slow down. The extent to which the speed changes is proportionate to the amount of time the button
is pressed. For example, if the (+) PITCH BEND BUTTON (22) is held down continuously, the disc speed will
increases and will continue to increase until it reaches a maximum of 12% speed gain. When you release the
(+) PITCH BEND BUTTON (22) the disc speed will automatially return to it’s previous speed.
c
Holding down or tapping on the (+) PITCH
BEND BUTTON (22) will provide a speed
bump in the playback pitch.
TRACK
M
S
F
Figure 15
TRACK
M
S
F
Holding down or tapping on the (-) PITCH BEND
BUTTON (21) will provide a slow down in the
playback pitch.
Figure 16
JOG WHEEL (13)
The JOG WHEEL (13) will temporarily bend the pitch if a track
is in play mode. Turing the wheel in a clockwise direction will
increase your track pitch and turning the wheel in a counter-
clockwise direction will slow your track pitch. The speed you
rotate the JOG WHEEL (13) will determine pitch bend per-
centage, to a maximum of +/-16%.
TRACK
M
S
F
Figure 17
©American Audio®
-
-
SCD-100™ Instruction Manual Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (18) is pressed. A cue point
may be created anywhere on a disc or in a track.
JOG WHEEL (13) to set a cue point by frame. While
TRACK
M
S
F
the disc is in pause or cue mode, use the JOG WHEEL (13)
to scroll through a track to find your desired starting point.
Once you have found your desired cue point press the PLAY
BUTTON (18) to enter this point in to the unit's memory. At
this point when ever the CUE BUTTON (16) is pressed it will
return the track to this exact point.
Figure 28
A loop is a sound loop that plays continuously. You can use this loop to create effect in your mixing. This loop
has no time limit and you could actually loop the entire length of disc. You create a loop between two continu-
ous points of a disc. The following steps illustrate the procedures for creating a loop:
TRACK
M
S
F
1) Press the PLAY/PAUSE BUTTON (18) to activate
playback mode.
Figure 28
2) Press the LOOP BUTTON (9). This will set the starting loop
point. The LOOP LED (8) will flash briefly indicating a starting
point has been set.
TRACK
M
S
F
3) Press the LOOP BUTTON (9) again to set the ending point
for your LOOP (Figure 13). The LOOP LED (8) will begin to
flash indicating a loop has been activated.
Figure 28
TRACK
M
S
F
To exit a loop, press the
TON (9). Music playback will resume normal play.
Figure 28
©American Audio®
-
-
SCD-100™ Instruction Manual Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
This operation allows you to customize the order tracks are played back. You may select specific tracks to play
and the order they will be played in. You may program a maximum of 30 tracks at once and program a single
track to played more than once. To create a program:
1) Be sure a disc is inserted in the drive and press the
PROGRAM BUTTON (6). Pressing the PROGRAM BUT-
TRACK
M
S
F
TON (6) from any function will immediately pause the
disc and enter the program mode.
2) After activating the program mode the PROGRAM INDI-
CATOR LED (7) will begin to glow indicating Program
Mode has been activated.
Figure 27
TRACK
M
S
F
3) Select a track to be programmed by using the FORWARD
TRACK SKIP (20) and BACK SKIP TRACK BUTTON (14)
Figure 28
TRACK
M
S
F
4) Once you reach the track you wish to place in to the pro-
gram memory pressing PROGRAM BUTTON (6)
track into memory.
Figure 29
5) Repeat these steps three and four up to 29 times (up to 30 tracks may be programmed).
6) As you program tracks in memory the LCD (4) will indicate the tracks that have been programmed
in to memory.
7) When you have finished your programming and are ready to
begin playback simply press the PLAY/PAUSE BUTTON (18)
and your program will begin to play.
TRACK
M
S
F
8) After you complete your program you can always add more
tracks to your program by repeating the steps one through
four. Remember that you can only have a maximum of 30 track
in a program and you can only add track not subtract.
9) To cancel and clear the program press and hold down the
PROGRAM BUTTON (6) for more than two seconds (see figure
29).
Figure 30
©American Audio®
-
-
SCD-100™ Instruction Manual Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER DOWN
• When you have finished using the CD unit, and before switching off the power, be sure that the disc
OPEN/CLOSE BUTTON (2) (see figures 7 & 8).
• TRAY PROTECTION: If tray is not closed after 60 seconds, it will close automatically and pause.
CAUTION: DO NOT forcibly close the disc holder when the power is off.
Do not switch off the power
when the disc holder is open.
Switch off the power after the
disc holder has been closed
with the OPEN/CLOSE button.
DO NOT switch off the power when the disc holder is
open. Switch off the power after the disc holder has
been closed with the OPEN/CLOSE BUTTON (2).
COMPACT DISC
1. PRECAUTIONS ON HANDLING COMPACT DISCS
Compact disc are constructed of the same types of plastic record are. To avoid severe damage to you valuable
disc please observe the following guide lines. Following the these guide lines will ensure long disc life.
Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with
a soft dry cloth.
Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths
to clean discs.
Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from
its edges.
Do not bend the disc.
Do not apply heat.
Do not enlarge the hole in the center of the disc.
Do not write on the label (printed side) with a hard tipped implement such as a pencil or ball point pen.
Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in
winter. Do not attempt to dry the disc with a hair dryer, etc.
2. PRECAUTION ON STORAGE
After playing a disc, always unload it from the unit.
Always store the compact disc in the jewel case, protecting from dirt or damage.
Do not place discs in the following areas:
a) Areas exposed to direct sunlight for a considerable time.
b) Areas subject to accumulation of dust or high humidity.
c) Areas affected by heat from indoor heaters, etc.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be
free of manufacturing defects in material and workmanship for a period of 2 Year (730 days) from
the date of purchase. This warranty shall be valid only if the product is purchased within the
United States of America, including possessions and territories. It is the owner’s responsibility to
establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the American Audio® factory. All shipping charges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the
terms of this warranty, American Audio® will pay return shipping charges only to a designated
point within the United States. If the entire instrument is sent, it must be shipped in its original
package. No accessories should be shipped with the product. If any accessories are shipped
with the product, American Audio® shall have no liability whatsoever for loss of or damage to
any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified
in any manner which American Audio® concludes, after inspection, affects the reliability of the
product; if the product has been repaired or serviced by anyone other than the American Audio®
factory unless prior written authorization was issued to purchaser by American Audio®; if the
product is damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri-
odic check-up. During the period specified above, American Audio® will replace defective parts
at its expense, and will absorb all expenses for warranty service and repair labor by reason of
defects in material or workmanship. The sole responsibility of American Audio® under this war-
ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the
®. All products covered by this warranty were manufactured
after January 1, 1990, and bear identifying marks to that effect.
® reserves the right to make changes in design and/or improvements upon its
products without any obligation to include these changes in any products theretofore manufac-
tured.
No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
plied with products described above. Except to the extent prohibited by applicable law, all
implied warranties made by American Audio® in connection with this product, including warran-
ties of merchantability or fitness, are limited in duration to the warranty period set forth above.
And no warranties, whether expressed or implied, including warranties of merchantability or
fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s
sole remedy shall be such repair or replacement as is expressly provided above; and under no
® be liable for any loss or damage, direct or consequential,
arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American Audio® Products and super-
sedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
©American Audio®
-
-
SCD-100™ Instruction Manual Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL
Model: American Audio® SCD-100™ - Professional Compact Disc Player
System:
Single Tray Front Loading, Digital Compact Disc Audio Player.
Disc type:
Standard compact discs (5 in / 12cm and 3in/8cm discs)
Dimensions:
3.5” H x 19” W x 13.5” L / 482W x 88.8H x 268D mm
Installation:
Place on flat surface or mount in flat case
Weight:
7 Lbs. / 4 kgs
AC 115v/230v, 50/60Hz
14W
Power supply:
Power consumption:
Pitch control range:
Pitch bend:
+/-8%, +/-12%, +/-16%
+/-16%
Pitch accuracy:
Environmental conditions:
+/- 0.1%
Operational temperature:
Operational humidity:
Storage temperature:
5 to 35˚C (41 to 95˚F)
25 to 85% RH (non-condensation)
-20 to 60˚C (4 to 140˚F)
Accessories:
Dual RCA Cable (for left and right channels)
AUDIO SECTION:
Quantization:
16 bit linear per channel
44.1 kHz at normal pitch
8 times over sampling 1 bit D/A converter
16 bit
Sampling rate:
Over sampling rate:
D/A conversion
Frequency response:
Output level:
Load impedance:
Digital Output Level:
+/- 1 dB 20 Hz to 20,000 KHz
2.0V +/- 1dB
47k ohm or more
0.5V p-p (Load = 75ohms)
AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm):
ITEM
NOMINAL
LIMIT
CONDITION
Output level
2.0Vrms
0.5dB
2.0V+/-1dB 1KHz,0dB
Channel balance
Frequency response
De-emphasis response
Channel separation*
T.H.D. + NOISE*
1.0dB
+/-1.0dB
+/-1dB
80dB
1KHz,0dB
+/-0.5dB
+/-0.5dB
86dB
20Hz-20KHz,0dB
16KHz, -20dB
1KHz,0dB
0.01%
94dB
0.02%
88dB
1KHz,0dB
S/N ratio (IHF-A)*
1KHz.0dB
NOTE: *With 20KHz low pass filter.
SEARCHING TIME (TEST DISC: TCD-792):
ITEM
NOMINAL
LIMITS
CONDITION
Short access time
Long access time
CD recover time
1.7 sec
3 sec
1 sec
4 sec
6 sec
2 sec
Play next track
Track 1 ->Track 20 / Track 20 ->Track 1
CD play interrupted by mechanical shock
PLAYABILITY:
ITEM
NOMINAL
LIMIT
CONDITION
Interruption
Black dot
Finger prints
Eccentricity
Vertical deviation
1000um
1000um
75um
210um
1mm
800um
600um
65um
140um
500um
TCD-725
TCD-725
TCD-725
TCD-712,713
TCD-731R
PICK-UP (Sony KSS-213C):
System
Object lens drive system optical pick-up
2 dimensional parallel drive
3 spot beam detection
Semiconductor laser
Object lens drive system
Tracking detection
Optical source
Wave length
780nm
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
©American Audio®
-
-
SCD-100™ Instruction Manual Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
©American Audio
A Division of the American DJ Group of Companies
American Audio World Headquarters:
4295 Charter Street
Los Angeles, CA 90058 USA
Tel: 323-582-2650 Fax: 323-582-2610
Download from Www.Somanuals.com. All Manuals Search And Download.
|