Voice
Internet
02-4.5
Shaping the Future of Converged Communications
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING!
Toll fraud is committed when individuals unlawfully gain access to
customer telecommunication systems. This is a criminal offense.
Currently, we do not know of any telecommunications system that is
immune to this type of criminal activity. AltiGen Communications, Inc.
will not accept liability for any damages, including long distance charges,
which result from unauthorized and/or unlawful use. Although AltiGen
Communications, Inc. has designed security features into its products, it is
your sole responsibility to use the security features and to establish security
practices within your company, including training, security awareness, and
call auditing.
NOTICE
While every effort has been made to ensure accuracy, AltiGen
Communications, Inc. will not be liable for technical or editorial errors or
omissions contained within the documentation. The information contained
in this documentation is subject to change without notice.
This documentation may be used only in accordance with the terms of the
AltiGen Communications, Inc. License Agreement.
AltiGen Communications, Inc.
47427 Fremont Blvd.
Fremont, CA 94538
Telephone: 510-252-9712
Fax:
510-252-9738
E-mail:
Web site:
TRADEMARKS
AltiGen, AltiServ, AltiWare, AltiSpan, AltiReach, AltiLink, AltiConsole,
AltiAdmin, Zoomerang and Dynamic Messaging are trademarks or
registered trademarks of AltiGen Communications, Inc.
All other brand names mentioned are trademarks or registered trademarks
of their respective manufacturers.
Copyright © AltiGen Communications, Inc. 2000. All rights reserved.
Printed in U.S.A.02/2002 Part Number 4003-0002-4.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Phone Feature Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AltiGen Voice Mail System Quick Features . . . . . . . . . . . . . . . . 1
Making Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Call Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Other Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CHAPTER 1
AltiServ Telephone Functions . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Making Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Centrex Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Conference Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Consultation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Call Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System Call Park and Silent System Call Park. . . . . . . . . . . . . . . 7
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Multiple Call Waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
System Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Dialing a Remote AltiServ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Calling a Remote Extension Directly over IP. . . . . . . . . . . . . . . 10
Calling Remote Auto Attendant or Operator . . . . . . . . . . . . . . . 10
Calling a Remote Number (Hop Off Dialing) . . . . . . . . . . . . . . 10
Voice Over IP Trunk Call Support . . . . . . . . . . . . . . . . . . . . . . . . . 12
Supported Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remote Locations IP Dialing Chart . . . . . . . . . . . . . . . . . . . . . . . . 14
Using Feature Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AltiServ User Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
AltiGen Voice Mail System Quick Features . . . . . . . . . . . . . . . 18
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Call Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Workgroup Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Workgroup Supervisor Features. . . . . . . . . . . . . . . . . . . . . . . . . 21
Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Operator Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Call Handling and the Auto Attendant. . . . . . . . . . . . . . . . . . . . 23
Checking the General Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . 23
Calls on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operator Off-line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Outside Call Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CHAPTER 2
Using the AltiGen Mail Voice System . . . . . . . . . . . . . . . . . .25
Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Remote Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
About Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Transfer to AltiGen Voice Mail System Feature . . . . . . . . . . . . 27
Returning to Auto Attendant from the AltiGen Voice Mail System
27
AltiGen Voice Mail System Main Menu Options . . . . . . . . . . . . . 28
Listening to Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Sending Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Making a Call from within the AltiGen Voice Mail System . . . 31
Personal Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Recording Greetings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using Message Notification. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using Reminder Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Feature Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using Distribution Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Log on/off IP Extension (Dynamic IP Addressing Only) . . . . . 38
Dynamic Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Zoomerang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2
AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Private Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
AltiGen Voice Mail System Mixed-Media Messaging . . . . . . . . . 41
Accessing AltiGen Voice Mail System Mixed-Media Messages41
CHAPTER 3
Using AltiReach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
The Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting Call Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
One Number Access (ONA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Message Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Station Speed Dialing Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
AltiServ User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Feature Codes
## <pwd> . . . . . . . . . . . . . . . . . Log in to voicemail at your own
station
### <ext> <pwd>. . . . . . . . . . . Log in to voicemail at another station
AltiGen Voice Mail System Quick Features
#11 . . . . . . . . . . . . . . . . . . . . . . Greeting Menu
#28 . . . . . . . . . . . . . . . . . . . . . . Password Menu
Making Calls
#34 . . . . . . . . . . . . . . . . . . . . . . Dial By Name1
#35 . . . . . . . . . . . . . . . . . . . . . . Virtual Log In (Station Privilege
Override)
#69 . . . . . . . . . . . . . . . . . . . . . . Dial Last Caller
#77 . . . . . . . . . . . . . . . . . . . . . . Station Speed Dial
#88 . . . . . . . . . . . . . . . . . . . . . . System Speed Dial
#99 . . . . . . . . . . . . . . . . . . . . . . Last Number Redial
#93 <ext> . . . . . . . . . . . . . . . . . Intercom Call (to 390 phone only2)
Answering Calls
#29 <ext> . . . . . . . . . . . . . . . . . Individual Call Pickup (a specific
station)
#30 . . . . . . . . . . . . . . . . . . . . . . System Call Pickup (any station
ringing)
FLASH #31 . . . . . . . . . . . . . . . Personal Call Park
#31 <ext> . . . . . . . . . . . . . . . . . Personal Call Park Pickup
FLASH #41 . . . . . . . . . . . . . . . System Call Park
#41 <loc. #> . . . . . . . . . . . . . . . System Call Park Pickup
#81 . . . . . . . . . . . . . . . . . . . . . . Hands Free Intercom Mode
#82 . . . . . . . . . . . . . . . . . . . . . . Hands Free Manual Answer Mode
Call Management
#15 . . . . . . . . . . . . . . . . . . . . . . Transfer to Auto Attendant
1
Feature must be enabled by system administrator.
Feature available only on systems with Triton Analog Extension board.
2
AltiServ User Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
#26 . . . . . . . . . . . . . . . . . . . . . . .Station Log Out
#27 . . . . . . . . . . . . . . . . . . . . . . .Station Log In
#32 <acct code>. . . . . . . . . . . . .Enter Account Code (before dialing)
FLASH #32 <acct code>. . . . . .Enter Account Code (mid-call)
#31 <acct code>. . . . . . . . . . . . .Re-enter Account Code (mid-call, to
correct)
#33 . . . . . . . . . . . . . . . . . . . . . . .Do Not Disturb
#36 . . . . . . . . . . . . . . . . . . . . . . .Call Forwarding
#37 . . . . . . . . . . . . . . . . . . . . . . .Remote Call Forwarding
Other Features
#22 . . . . . . . . . . . . . . . . . . . . . . .Feature Status Check
#25 . . . . . . . . . . . . . . . . . . . . . . .Station Speed Dial Setup
#38 . . . . . . . . . . . . . . . . . . . . . . .Outside Call Blocking (operator only)
#39 . . . . . . . . . . . . . . . . . . . . . . .Operator Off-Line (operator only)
#44 . . . . . . . . . . . . . . . . . . . . . . .Overhead Paging
#45 . . . . . . . . . . . . . . . . . . . . . . .Overhead Paging by Trunk
#55 . . . . . . . . . . . . . . . . . . . . . . .List Feature Tips
#73 . . . . . . . . . . . . . . . . . . . . . . .Silent System Call Park
FLASH <ext> . . . . . . . . . . . . . .Transfer
FLASH #40 . . . . . . . . . . . . . . . .Transfer to AltiGen Voice Mail
System
FLASH # 15 <AA#> . . . . . . . . .Transfer to Auto Attendant
FLASH # # <ext> . . . . . . . . . . .Transfer to a User’s Voice Mail
FLASH <ext> FLASH . . . . . . .Consultation
FLASH <number> # . . . . . . . . .Conference Call
FLASH . . . . . . . . . . . . . . . . . . .Call Waiting
2
AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
C
H A P T E R
1
AltiServ Telephone Functions
AltiServ provides a broad range of call-handling and dialing features. For
you to use the system most effectively, you might want to browse through
this section and keep it handy for future reference.
Note: This guide refers to the FLASH button on the telephone device.
The flash function is the off-hook flash used, for example, to take
the other call in a simple call-waiting situation. Some telephones
may provide a LINK or similar button that provides the same
function.
Basic Functions
Making Calls
•
To make an internal call to another extension, lift the handset
off-hook, wait for dial tone and dial the extension number.
•
To make an external call, lift the handset off-hook, wait for dial tone,
dial the designated outside line access digit and dial the phone number.
The outside line digit(s) are provided by your administrator.
Note: If the Forced Account Code feature is enabled, the user must
enter an Account Code before making an external call.
Answering Calls
When you answer the phone, there may be different rings depending on
who is calling you. When Distinctive Ringing is enabled on your system,
three different ringing cadences may be used:
•
•
•
Internal Call = short double rings
External Call = long single rings between long pauses
Operator Call = long single rings between short pauses
AltiServ User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting a Call on Hold
While connected to a call, do one of the following:
•
Press the FLASH button to play music on hold —if the system is
configured to play music on hold—and do not hang up. Hanging up
will disconnect the call. To reconnect to the call, press the FLASH
button again.
•
Press the HOLD button. Nothing is heard while placed on hold this
way. Hanging up here will not disconnect the call. To reconnect to the
call, press the HOLD button again.
Transferring Calls
To transfer the currently connected call:
1. Press the FLASH button.
2. At the dial tone, dial the third party’s extension number, or if
permitted, a trunk-line access prefix and an external phone number.
3. When the third party answers, announce the call or simply hang up.
When hanging up, use the Release button if available, or keep the
hook-flash depressed for a couple of seconds to make sure the call is
transferred.
To abort the transfer and reconnect to the incoming call, press FLASH
again before the transfer is complete.
Centrex Transfer
If you have a Centrex line, you can use this feature to transfer an external
call to an outside number without having to tie up two trunk lines. Once the
transfer is complete, the external caller’s line connects directly to the
outside number. Since there are no longer any connections to internal users,
internal trunk lines are then dropped, freeing up system trunk line resources
for other calls.
To complete a Centrex transfer:
1. Press FLASH, then *.
2. Dial the second party’s number (no need to dial the prefix for trunk-
line access such as 9) and either hang up or announce the call.
4
AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Once you place the handset back on-hook, the trunk line also drops and
Centrex completes the transfer.
Transferring Calls into the AltiGen Voice Mail System
To send an outside call into the AltiGen Mail Voice system, press FLASH
# 4 0.
Transferring Calls Directly to a User’s Voice Mailbox
To transfer a call directly into a user’s voice mail, press FLASH ## and the
user’s extension number. When you transfer a call this way, you do not
need to set the user’s station on Do-Not-Disturb or wait for the phone to
finish ringing.
Transferring Calls to an Auto Attendant
To transfer a call to the Auto Attendant, press FLASH # 15 and the
Auto Attendant number. For example, if 001 is the initial greeting to which
you want to send the user, press FLASH # 15001.
Conference Calls
You can place conference calls including up to 5 parties, and you can speak
privately with each party before adding them to the conference call. Any
internal user is able to add parties to the conference call.
The quality of the conference call depends on the quality of service
available with the local telephone company.
To initiate a conference call while connected to the first party:
1. Press FLASH.
2. At the dial tone, dial the next party’s phone number.
3. Wait for the third party to answer and announce the conference call.
4. Press # to put all three parties into the conference call.
5. During conferencing, any internal conference participant may press
FLASH, dial the next party’s number, and press # to bring the person
into the conferencing session.
There are some system technical restrictions on conference calls.
AltiServ User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
On each Quantum board, the extensions assigned to the board can be
involved in a maximum of 3 different conferences. For example, if
extensions 101–110 are all on the same board, 101, 105, and 107 could be
involved in one conference call, while 104 and 108 were on another, and
109 and 102 were on a third call.
Depending on the type of board, each Quantum board could run up to 4, 8,
or 12 extensions. There is no limit to conferencing extensions from the
same board.
For all conferences on a single board, the system allows up to 4 extensions
total from any of the other boards, in any combination, at any one time.
For example, if Conference #1 includes 4 extensions from other boards,
Conference #2 and #3 cannot have any. If Conference #1 includes only 2
extensions from other boards, 2 other extensions could be used by
Conference #2 or #3.
If these limits are reached, the system rejects attempts to conference
additional parties to the call.
Consultation
To place the caller on hold and speak with a person at another
extension:
1. Press FLASH and dial the extension number of the person you wish to
speak with.
2. When you are finished, press FLASH again to disconnect the
consultation and return to the original caller.
Call Park
You can park calls and then pick them up at your current station or another
one. After a time-out period—set in the AltiWare Administrator—parked
calls ring the extension at which they are parked.
To park calls:
1. Do one of the following:
• To park the call at the current extension, press FLASH # 31 and
hang up.
6
AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
• To park the call at another extension, press FLASH # 31 followed
by the extension number. For example, to park the call at ext. 487,
press FLASH # 31487.
2. To pickup the parked call, press # 31 followed by the extension
number of the station where the call is parked.
System Call Park and Silent System Call Park
System Call Park allows the user to park a call at a public “location” by
entering FLASH #41. The system announces where the call is parked—a
location number. Calls parked by a user will ring that user’s extension after
the time-out period expires.
You can enable the Silent System Call Park feature by pressing #73 on
your telephone keypad. This feature is used to disable the system from
announcing the “location” of a call when using the System Call Park
feature. This announcement is sometimes confusing when using graphic
interface applications such as AltiConsole rather than using the telephone.
It also eliminates having to wait for the location number to be announced
before moving on to the next task.
Call Waiting
To use call waiting, it must have been enabled either for the system in the
AltiWare Administrator or by the user in AltiReach. The latter is described
in “Setting Call Management” on page 44.
If a call comes in while you’re on the phone, the system will beep up to
three times over a 24 second period before the call is routed into voice mail.
To answer the call:
1. Press FLASH to put the first call on hold and simultaneously connect
to the waiting call.
2. Press FLASH again to return to the first call.
Distinctive Call Waiting Tone
If the Distinctive Call Waiting Tone option is enabled by the system
administrator, you may have three different call waiting tones cadences that
distinguish the types of calls:
• Internal Call = two tones
• External Call = one tone
AltiServ User Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Operator Call = three tones
Multiple Call Waiting
This feature enables a “personal” queue that allows you to handle multiple
incoming calls by letting callers wait in queue until you answer the call.
You can transfer or park calls before answering the next call in queue.
Multiple Call Waiting must be enabled for your extension by the system
administrator before it can be used.
Before being placed in queue, the caller hears an Initial Greeting. Once in
the queue, the caller hears a Subsequent Greeting every 30 seconds. You
can change or customize these greetings in the AltiGen Voice Mail system
at the Personal Options menu as described in “Recording Greetings” on
page 9.
In queue, the callers can press pound (#) to exit the queue and leave a voice
mail message or, if your organization has an operator, press 0 for the
operator. You may want to remind users of these options in the greetings.
To answer calls in a Multiple Call Waiting situation:
•
During a call, you will hear an alert tone (audio beep) for each new call
that is added to the queue.
•
If you hang up, the phone will ring with the next caller in queue.
1. To park or transfer a call before answering the next call, press the Link
or FLASH key and do one of the following:
• To transfer the call, enter the extension or phone number and hang
up.
• To park the call using Personal Call Park, press # 31, enter an
extension number only if you want to park the call at an extension
other than your own, and then hang up (see “Call Park” on page 6).
• To park the call using System Call Park, press # 41, note the
parked call “location” number, and then hang up.
2. Answer the next call in queue; it will ring after you disconnect the
previous call.
8
AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Account Codes
The supervisor can create or assign codes that will enable or force users to
assign outgoing calls to particular codes for billing, tracking or forecasting
purposes.
When this option is enabled, after the user enters outgoing call digits, the
system will prompt the user for an account code before allowing the
outgoing call to proceed.
System Callback
You can have AltiServ call you at a remote location. This is useful for
mobile users who don’t want to accrue expensive toll charges while
traveling, especially from international locations where there is no access
to toll-free numbers.
In order to access this feature, System Callback must be configured in the
Auto Attendant by the system administrator.
To use the System Callback feature:
1. Call the AltiServ system you want to call you back.
2. Using the Auto Attendant, select the System Callback option.
3. When prompted, enter your extension number and password.
4. Enter the number for AltiServ to call you back and press # at the end
of the number. When you enter the number, it should be exactly as
AltiServ will dial it back; enter a 1 and the area code if it is a long
distance number or 011 and the country code if it is an international
number. You do not need to enter an outside line access digit (e.g. 9).
5. Hang up. AltiServ will call you back at the number you specified.
6. When prompted, enter your password. At successful login, you are
connected to the Auto Attendant.
AltiServ User Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing a Remote AltiServ
Calling a Remote Extension Directly over IP
To call a remote extension directly over IP:
1. Dial the IP trunk access code (e.g. 8).
2. Dial the destination ID (e.g. 1), if applicable.
3. Dial the destination extension number (e.g. 101).
Calling Remote Auto Attendant or Operator
If the remote system is configured to connect incoming calls to an operator
or Auto Attendant (and not to a person’s or workgroup extension), you can
connect with the operator or Auto Attendant as follows:
1. Dial the IP trunk access code (e.g. 8).
2. Dial the destination ID (e.g. 1), if applicable.
Calling a Remote Number (Hop Off Dialing)
If your AltiWare systems are configured to allow Hop Off dialing—using
a remote trunk to place an outgoing call—you can do that as follows:
1. Dial IP trunk access code (e.g. 8).
2. Dial the remote system ID digit (e.g. 3).
3. Dial *, which selects the PSTN trunk with the lowest value in the
access code.
4. Dial the phone number (e.g. 14085551212).
5. Optionally, press # to speed up the call.
For example, to call 650 555-4444, using your local IP trunk access code
of 8 and the remote system with an ID of 3, you would dial 8 0 *
16505554444#, this will call 14085551212 using a CO (Central Office)
trunk on the remote system.
You can also replace the * with a 9 to select the remote access trunk code
9. The specific trunk access code only works for 9. You cannot select 8, 7,
or 6, etc., as the trunk access code using this dialing method unless the
remote extension for this system is set to unknown.
10 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The remote Extension Length must be always be set to None for
the remote system entry, if using Hop Off Dialing.
Hop On Dialing to a Remote Extension
To hop onto a remote extension:
1. The incoming call must come in over T1/PRI or the CO to an
extension.
2. The extension is set up to forward over IP to the remote extension.
AltiServ User Guide 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Over IP Trunk Call Support
If your system is set up with Voice Over IP, you can use the following
trunk-related AltiServ features during IP trunk call sessions.
Supported Features
The following features are supported while dialing through IP trunks:
• Incoming and Outgoing Trunk Calls—you must dial the IP trunk
access code to make outgoing calls via an IP trunk.
• Call Transfer To and From IP Trunk (Blind and Supervised)—
you must dial the IP trunk access code and all necessary prefixes to
transfer calls via an IP trunk.
• One Number Access—when entering “outcall” numbers via
AltiReach or AltiAdmin, you must add the IP Trunk Access
number. For example, if you want AltiServ to dial the extension 300
at a remote AltiServ where the location ID (Dialed Digits) is 1 and
the IP trunk access code is 8, you must enter 81300 as the outcall
number.
• Message Notification
• Reminder Calls
• Multi-Location Conferencing
• Call Park
• Call Waiting
• Call Forwarding
• Automatic Call Distribution
• Auto Attendant
• System CallBack over IP Trunk
• Calling Out from Voice Mail
• Zoomerang—allows the caller to leave a different extension
number as the callback number. If the callback number of a call
from another AltiServ is available and automatically captured,
AltiServ only announces the extension number but connects to the
correct remote AltiServ.
12 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
• Dial Last Caller—AltiServ will use an IP trunk to dial the last
caller if that call was received via an IP trunk.
• Call Restrictions
• Speed Dialing—be sure to enter all appropriate prefixes such as IP
trunk access code, Dialed Digits, etc.
• Call Accounting
• Caller ID—displays location and extension number. If an
incoming call is from an unspecified IP host, the IP address is used
instead of location name.
• Voice Mail
• Microsoft Exchange Integration
• AltiConsole Client Support—you can use AltiConsole to handle
calls to and from IP trunks.
• AltiReach Support—all features accessible via AltiReach (One
Number Access, Message Notification, etc.) can be used with IP
trunks. Call View and Workgroup View windows also show call
activities over IP trunks.
• AltiView / AltiView IP Extensions
AltiServ User Guide 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Locations IP Dialing Chart
To use IP trunks to dial remote AltiServ locations, generally you need to
know the IP trunk access code, the remote location ID (the digit[s] you dial
to reach the remote server), and the remote extension you want. You can
use the following chart to list the IDs and extension lengths for each remote
AltiServ system.
IP Trunk Access Code: (e.g. 8)
Remote Loc. ID
(Dialed Digits)
Extension Length
(at remote location)
Location/Destination
(example) San Jose
(example) Seattle
1
2
3
3
14 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Feature Codes
The following sections describe additional telephone features used for call
handling and management. To use any of these features:
1. Lift the handset off-hook and wait for the dial tone.
2. Dial the keys indicated in the “Dial” column.
3. Follow the instructions in the “Description” column.
AltiServ User Guide 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering Calls
a
Feature
Dial
Description
Individual Call
Pickup
#29
Connects to the local set with extension <ext>.
<ext>
#30
Note: For workgroup calls, only a workgroup
agent can pick up the call.
System Call
Pickup
Connects the call of any ringing phone to the
local set.
(any ringing
phone)
Note: For workgroup calls, only a workgroup
agent can pick up the call.
Personal Call
Park
FLASH
Parks the call to later pick up from this or
#31, then another station. Or park the call at a specific sta-
hang up; tion by pressing FLASH #31 and the extension
OR
FLASH
of the other station. You can have up to 50 calls
parked per station simultaneously. Parked calls
#31<ext>, ring the extension upon timeout. Timeout time is
then hang configurable, with a default of 2 minutes.
up
If you park the call to a workgroup extension,
only you or the workgroup agents can pick up
the call with #31 <ext>.
Note: If you park a call to a workgroup pilot
number, only you or a workgroup agent
can pick up the call with #31<ext>.
Personal Call
Park Pickup
#31
<ext>
Pick up the call parked at extension <ext>
If the call was parked to a workgroup extension,
only a workgroup agent or the user who parked
the call can pick it up with this feature..
Note: If the extension is a workgroup pilot
number, only a workgroup agent or the
person who parked the call can pick it up.
System Call Park FLASH
#41
Park a call at a public “location” station by enter-
ing FLASH #41. The system announces where
the call is parked (a location number). Calls
parked by a user will ring that user’s extension
upon time-out after 2 minutes.
System Call Park #41
Pick up the system parked call at location num-
ber <loc>
Pickup
<loc>
16 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands Free
Intercom Mode
#81
Allows you to receive internal calls through the
speaker phone without having to pick up the
handset to answer, as the system will connect the
call to your phone automatically within one ring.
Outside calls, however, will continue to ring the
phone, and you must answer these manually.
You can use the handset if that is preferred.
Caution, Security Issue: If you are away from
your desk for a moment, or if the ringer is off,
you may not be aware that a call has come in and
the caller is connected and listening to whatever
conversation you are having.
Pressing #81 activates; pressing #81 a second
time deactivates this feature.
You must use a speaker phone, and the speaker
must be turned on to use this feature. When a
call comes in, you hear a ringing tone from the
speaker, and the call is automatically connected.
Pressing #82 activates; pressing #82 a second
time deactivates this feature.
Activating #82 causes #81 to be deactivated.
Note: If you are using a 390 phone, #81 mode
will automatically be deactivated when
any incoming call is disconnected.
Hands Free Man- #82
ual Answer Mode
Allows you to receive internal and external calls
through the speaker phone without having to
pickup the handset to answer, provided you use
AltiGen's AltiView or Contact Advantage desk-
top PC application with the ‘Answer’ button to
take the call—by speaker phone, handset, or
headset as you prefer. The system will not auto-
matically answer.
Pressing #82 activates; pressing #82 a second
time deactivates this feature.
Activating #82 causes #81 to be deactivated.
a <ext> = extension num.; <nn> = 2-digit num.; <loc.> location
num.
AltiServ User Guide 17
Download from Www.Somanuals.com. All Manuals Search And Download.
AltiGen Voice Mail System Quick Features
The following voice messaging features are accessible in the same way as
telephone features, without having to login to the AltiGen Voice Mail
System.
Feature
Dial
Description
Greeting Menu
# 11
<pass-
word>
Follow the system prompts to change
your greeting.
Password Menu
# 28
Follow the system prompts to change
your password.
1
Making Calls
a
Feature
Dial
Description
Dial By Name
#34
After entering #34, enter the letters of the
<string> # name (first, or last, or both in any order),
followed by #. Use 1 for Q and Z. The
system searches for a unique name and
calls the extension associated with the
name.
Note: This feature must be enabled by
your system administrator.
Station Privilege Over- #35
To have your own calling privileges at
ride
<your ext> that phone set for the next call only. After
<pass-
word>
the call, the phone set returns to its origi-
nal call restrictions.
Dial Last Caller
#69
Dials the last incoming call number.
Station Speed Dial
#77 <nn> Dials the 2-digit speed dial number <nn>.
See “Station Speed Dial Setup” on page
22.
System Speed Dial
#88 <nn> Dials the 2-digit system-wide speed dial
number <nn>.
Intercom Call (to 390
#93 <ext> If the callee uses a 390 phone, connects
you directly to the callee’s intercom after
exactly one ring. After one ring, your
voice will be audible on the callee’s 390
phone intercom.
b
phone only )
18 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Last Number Redial
#99
Saves and redials the last number dialed.
a <ext> = extension num.; <nn> = 2-digit num.; <loc.> location
num.; <string> = character string
b Feature available only on systems with Triton Analog Extension
board.
1
If you are unable to make calls within certain area codes, check with your Sys-
tem Administrator for any toll restrictions placed on codes and dialing prefixes.
AltiServ User Guide 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Management
a
Feature
Station Log Out #26
<pass-
word>
Dial
Description
Deactivates or shuts off your extension, forward-
ing all calls to voice mail. This feature can be
used to move your extension from your phone set
to another phone set in the office.
Station Log In #27
Reactivates your extension at your original phone
set or another one. If using a different phone set,
that set must be deactivated for any prior exten-
sion.
<ext>
<pass-
word>
#27 can also be used to hear the currently active
extension number for the phone set.
Account Code #32
(before calling) <acct.
code>
After entering the account code (a maximum of
ten digits), make the call when you hear the dial
tone. This feature can be used for client billing
purposes.
Account Code FLASH
(during a call) (wait for
Press FLASH, wait for the dial tone, enter #32
and the account code followed by #. You will
dial tone) then be reconnected to the call.
#32 <acct.
code>
Correct
Account Code <acct.
(during a call) code>
#31
Changes the account code mid-call, replacing the
originally entered code.
Do Not Disturb #33
/ Deactivate Do
Not Disturb
Activates Do Not Disturb when it’s off, deacti-
vates it when it’s on. While activated, all calls are
forwarded to busy handling.
Call Forward- #36 <pass- Forwards all calls to the destination, which can be
ing
word>
an internal extension or external phone number
<destina- including access code, long distance prefix and
tion> #
area code. To deactivate forwarding, press #36
again, or deactivate from within the AltiGen
Voice Mail System.
Remote Call
Forwarding
#37 <your When you’re on a telephone station other than
ext>
your own, forwards your calls to the current sta-
tion. Multiple users can forward to the same
extension. Deactivate it by pressing #37 again on
the same phone set.
<pass-
word>
a <ext> = extension num.; <nn> = 2-digit num.; <loc.> location
num.; <destination> = extension or complete phone number
20 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Workgroup Features
a
Feature
Dial
Description
Workgroup
Call Pickup
#29
<wkgp
ext>
Pickup incoming calls for your work-
group and ignore other calls coming into
the system.
Outbound Workgroup #53
Set the workgroup to associate outbound
calls to.
Workgroup Log In
#54
<wkgp
ext>
For workgroup members only: Logs in to
a workgroup.
Multiple Workgroup
Log In
#54 + 0 + For workgroup members only: Logs in to
<wkgp ext multiple workgroups.
1> + # +
<wkgp ext
2> + # etc.
Workgroup Log Out
#56
<wkgp
ext>
Log out and block workgroup calls but
receive other calls at your extension.
Multiple Workgroup
Log Out
#56 + 0
#90
Log out from all workgroups and block
workgroup calls but receive other calls at
your extension.
Status Ready
Tells the system your extension is ready
to receive workgroup calls. This can be
used to end a call Wrap Up Time delay.
#91
Tells the system not to route workgroup
calls to this extension.
Status Not Ready
a <wkgp ext> = workgroup pilot extension number.
2
Workgroup Supervisor Features
a
Feature
Dial
Description
Workgroup
Silent Monitor
#59 + <agnt
ext> +<wkgp
pwd> + 1
Listen to incoming or outgoing
calls in the specified workgroup.
Workgroup
Barge-in
#59 + <agnt
ext> +<wkgp
pwd> + 2
Intervene in a conversation
between an agent and a caller or
callee.
a <wkgp ext> = workgroup pilot extension number
AltiServ User Guide 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
a
Feature
Dial
#22
Description
Feature Status
Check
Retrieves an announcement about currently
activated telephone features. In addition, the
dial tone changes when the following features
are activated: Do Not Disturb, Call Forward-
ing, Remote Call Forwarding, Hands-Free
Mode, Dial Tone Mute Mode, Outside Call
Blocking (Operator only) and Operator Off-
line (Operator only).
Station Speed Dial #25 <nn> Program a station speed dial phone number
Setup
<phone
num> #
assigned to a 2-digit dialing number between
00 and 19. The phone number can be up to 20
digits, and must include all necessary digits
such as outside line access digit, 1 for out of
area numbers and the area code. When you
have finished, press #.
Hang up when done, or you can continue to set
up other speed dial numbers by pressing #
again.
Overhead Paging
#44
#45
If available on your system, connects to the
overhead broadcast device. Speak into the
handset and hang up when finished.
Overhead Paging
by Trunk
If available on your system, directs a call to a
particular trunk with a paging ID broadcast.
Allows broadcasting through a trunk without
checking call progress.
Feature Tips
#55
Plays helpful tips and reminders for optimal
use of AltiServ. There are eleven tips total and
a different one is played each time you access
Feature Tips. See “Feature Tips” on page 13
for more information.
Silent System Call #73
Park
Disable the system from announcing the
“location” of a call when using the System
Call Park feature. See “System Call Park and
Silent System Call Park” on page 7.
a <nn> = 2-digit num; <phone number> = extension or complete
phone number, including trunk or route access code
2
These features require a Triton Resource Board and system settings that allow
monitoring and barge-in.
22 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Operator Features
This section is provided specifically for the designated Operator.
Depending on your organization, this may be a single person or a number
of people.
Call Handling and the Auto Attendant
If your system uses the Auto Attendant, it can handle and route incoming
calls automatically with prompts and menus; most incoming calls do not
reach the Operator.
The call will ring at the Operator’s desk if the caller dials 0 while listening
to options given by the Auto Attendant. The sections at the beginning of
this chapter offer instructions on basic answering, putting calls on hold, and
transferring calls.
Checking the General Mailbox
The System Administrator may set up a General Mailbox where callers can
leave messages if they do not know who to speak with or when the Operator
is unavailable. This mailbox works like any other voice mailbox and has an
extension number and password. Be sure to check this mailbox frequently
and forward messages to the appropriate person as soon as possible.
Calls on Hold
To place a call on hold, do one of the following:
•
•
Press the FLASH button to play music on hold, or
Press the HOLD button to place the caller on hold without music.
If a call is placed on hold at the Operator’s desk, subsequent calls to the
Operator can be routed to the next extension in a queue, sent to a voice mail
(the General Mailbox), or placed into a new queue. Be sure to fully
understand your organization’s customized call processing procedures.
AltiServ User Guide 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operator Off-line
When the Operator Off-line feature is activated, all calls are directed to the
Auto Attendant. When callers dial 0 in the Auto Attendant, the system
transfers the call to the next extension in the workgroup if one is
configured. If there is no operator extension available, the system informs
the caller that the Operator is not available and to leave a message in the
Operator’s mailbox.
To activate this feature, press #39. When it’s active, you can deactivate it
also by pressing #39.
Outside Call Blocking
You can block access to all outside lines by pressing #38. Pressing #38 a
second time restores the system to its normal outside calling status.
24 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
C
H A P T E R
2
Using the AltiGen Mail Voice
System
This chapter describes the features and functions in the AltiGen Voice Mail
System, the voice messaging subsystem of AltiServ. The AltiGen Voice
Mail System includes basic voice mail functions and more sophisticated
features such as an interface with email.
The AltiGen Voice Mail System voice prompts provide instructions and
options for all functions. From any menu, press 0 to repeat your options or
* to return to the previous menu.
The chart at the end of the AltiServ User Guide will help you better
understand the menu structure.
Feature Tips
Each time you login to the AltiGen Voice Mail System, you hear a Feature
Tip—helpful tips and reminders of the most useful features for optimal use
of AltiServ. See “Feature Tips” on page 35 for more information on this
feature as well as instructions on how to enable/disable this feature.
Logging In
To login for the first time:
1. From your station, press ##.
2. Enter the default password your system administrator has given you.
Note: The default password is for initial login only; be sure to change it
as soon as possible.
To change your password, after pressing 4 at the Main Menu to hear
the Personal Options …
1. Press 2 for the Password options
2. Press 1 to change the password
3. Enter a new password. See “About Passwords” on page 27.
AltiServ User Guide 25
Download from Www.Somanuals.com. All Manuals Search And Download.
To perform a normal login at your station:
Press ##, followed by your password.
To login from another station or as a virtual extension:
Press ###, followed by your extension number, followed by your
password.
Remote Login
For remote login from outside the office:
Dial your company phone number and during the Auto Attendant
greeting, press #, followed by your extension number, followed by
your password.
For standard remote login:
The Auto Attendant must be configured. If Auto Attendant is not used
in your office, someone in the office (such as the operator) must
transfer you into the AltiGen Voice Mail System.
There are two ways to transfer users into AltiGen Voice Mail System:
• Normally, anyone in the office is able to send an outside user into
AltiGen Voice Mail System by pressing FLASH #40 while
connected to the user.
• If FLASH is disabled1, you can also login to AltiGen Voice Mail
System by pressing * during the voice mail greeting of any
extension. If you’re calling your own extension, you then enter your
password. If you’re calling someone else’s extension, press # to
enter your extension and then your password. Please see “Transfer
to AltiGen Voice Mail System Feature” on page 27.
1
FLASH may be disabled if the operator or user is using any TAPI third party
application that does not support it.
26 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
About Passwords
A valid password must be 4 to 8 digits in length, and different from your
extension number. It can contain numbers or letters A- Z. The letters map
to numbers as follows:
Numbers
Letters
Numbers
Letters
2
A, B, C, a, b, c
D, E, F, d, e, f
G, H, I, g, h, i
J, K, L, j, k, l
M, N, O, m, n, o
7
P, R, S, p, r, s
T, U, V, t, u, v
W, X, Y, w, x, y
Q, Z, q, z
3
4
5
6
8
9
1
Transfer to AltiGen Voice Mail System Feature
If the Auto Attendant is not active when you want to login from a remote
phone, you must have the operator or any other internal user transfer you
into AltiGen Voice Mail System. There are two ways to transfer users into
AltiGen Voice Mail System:
•
Normally, anyone in the office is able to send an outside user into
AltiGen Voice Mail System by pressing FLASH #40 while connected
to the user.
•
If FLASH is disabled2, you can also login to AltiGen Voice Mail
System by pressing * during the voice mail greeting of any extension.
If you’re calling your own extension, you then enter your password. If
you’re calling someone else’s extension, press # to enter your
extension and then your password.
Returning to Auto Attendant fromtheAltiGen Voice
Mail System
After a remote login, you can dial 9 from the main menu to return to the
Auto Attendant, provided the Auto Attendant is configured and activated.
This allows you to access voice mail and also speak with or leave messages
for others on the same phone call. Even if you decide not to leave a
message, you can press 9 to return to the Auto Attendant.
2
FLASH may be disabled if the operator or user is using any TAPI third party
application that does not support it.
AltiServ User Guide 27
Download from Www.Somanuals.com. All Manuals Search And Download.
If you leave a voicemail message and press # for delivery options and then
# to send it, you are given the option to return to the Auto Attendant to try
other extensions.
AltiGen Voice Mail System Main Menu Options
Once you’ve successfully logged into the AltiGen Voice Mail System, you
are presented with the following options at the Main Menu:
1. Listen to New Messages
2. Review Saved Messages
3. Send a Message
4. Access Personal Options
5. Access Private Messaging Options
6. Phrase Management (system manager extension only)
8. Review Mixed-Media Messages
9. Transfer Out of Voice Mail (for remote access AltiGen Voice Mail
System only)
#. Make a Call
Listening to Messages
If there are new messages in your voice mail box, the dial tone changes
from a constant tone to a broken tone. At the Main Menu, the AltiGen
Voice Mail System announces the presence of new and saved messages.
To check voice mail messages, press…
•
•
1 for new messages
2 for saved messages
To listen to Mixed-Media messages (see page 41), press 8 and then…
•
•
1 for new messages
2 for saved messages
The Main Menu options 1, 2, and 8 are not available and are not announced
if there are no new or saved messages.
28 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposing of the Messages
After or while listening to a new or saved message, you have the following
options. Press…
•
•
•
•
•
1 to delete
2 to replay
3 to save
4 to forward a copy of the message with an introduction
5 to call the sender
This is the Zoomerang feature described on page 39. Press *** to
disconnect from the call and return to the AltiGen Voice Mail System.
The sender’s caller ID information is automatically captured by the
AltiServ if the caller is an internal user or an outside caller who has
either a publicly listed number or has entered their callback number in
the delivery options menu after leaving the message. But if the caller
ID is not available, you can still use the Zoomerang feature by manu-
ally dialing the number.
When using Zoomerang with Cellular or PCS phones, see the discus-
sion in the next subsection.
•
•
•
•
•
6 to reply to the message
7 to rewind (during message playback)
9 to fast forward (during message playback)
# to skip
(To listen to a skipped message, press 1 again at the Main Menu.)
Note: See your System Administrator to activate or deactivate the
announcement of time and date for each message before
playing the message content. The time stamp can be skipped by
pressing 9 during playback.
About Outcalls to Cellular or PCS Phone Numbers
When an outcall is made by the system (for One-Number-Access, Message
Notification, Zoomerang, Call Forwarding, etc.), to a cellular or PCS
phone, it may ring the phone once but not necessarily present the call and
make a connection. This will happen if the ringback tone played by the
AltiServ User Guide 29
Download from Www.Somanuals.com. All Manuals Search And Download.
cellular service provider does not confirm to standard ringback tones. To
work around this problem, instruct users to append a few commas (,) to the
outcall (cellular) number when entering it. One comma provides a one
second pause.
Sending Messages
To send a message:
1. At the Main Menu, press 3.
2. Record your message and press # when finished.
If you need to re-record the message, press * when prompted.
3. Select a destination by entering one of the following:
• destination extension number
• # to enter destination extension by name. Enter last name followed
by the first name and press # when finished. (Use 1 for “Q” and
“Z”.)
• 01 followed by a personal Distribution List number to send a
message to a personal distribution list. See “Using Distribution
Lists” on page 36 for information on setting up distribution lists in
the AltiGen Voice Mail System. You can also set them up in
AltiView.
• 02 followed by a system Distribution List number to send a message
to a system distribution list. System distributions are set up by the
system administrator.
4. After selecting the destination, press one of the following:
• # to send immediately
• 1 for delivery options, then 1 for urgent delivery, or 2 for future
delivery. Urgent messages are placed at the beginning in the queue
of new messages to be heard, before other non-urgent messages.
• 2 to re-enter a destination as in step 3.
30 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call from within the AltiGen Voice Mail
System
You can make a call, either to another user’s extension number or to an
external phone number, using the AltiGen Voice Mail System. This can be
useful, for example, when you’re calling in from a remote location and
want to respond to messages and make other calls, all on the same call into
the AltiGen Voice Mail System.
Note: The use of this privilege is configurable on a per-user basis. Check
with your AltiServ system administrator.
To place a call, press # at the Main Menu, then dial the number or
extension.
For external numbers, dial the outside line access code (e.g., 9 or 8) and any
long distance prefix such as 1 and area code. Press *** to disconnect from
the call and return to the AltiGen Voice Mail System.
Personal Options
Personalize your AltiGen Voice Mail System by creating unique greetings
and customizing the system to notify you of important calls or remind you
about meetings and action items.
At the Main Menu, press 4 for the following Personal Options:
•
•
•
•
•
•
•
•
Personal Greetings
Password
Message Notification
Reminder Call
Call Forwarding
Feature Tips
Distribution Lists
Log on/off IP Extension
Recording Greetings
At the Personal Options menu, press 1 to record greetings, then press…
•
1 to record your Personal Greeting.
AltiServ User Guide 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Record your greeting and press # when finished. Example: “Hi, this is
Mary Smith. I am unable to answer your call at this time. Please leave
a detailed message and I will return your call promptly.”*
•
•
2 to record your Directory Name.
Record your full name and press # when finished.
3 to select which greeting to use (the system greeting or personal
greeting).
The following options, 4 and 5, are available only when Multiple Call
Waiting is enabled for your extension. See “Multiple Call Waiting” on
page 28. These features both require activation as discussed in the
preceding paragraph.
•
4 to record an Initial Greeting.
Callers will hear the Initial Greeting when placed in your personal
queue. Example: “Hi, this is Mary Smith. I’m on the other line at the
moment. If you would like to hold, please stay on the line. To leave a
message, press pound (#) at any time. Press 0 for the operator.”*
The system default Initial Greeting is: “<your directory name> is on
the phone and will be with you as soon as possible. You may hold or
press the # key to leave a message.”
•
5 to record a Subsequent Greeting.
Callers in your personal queue will hear the Subsequent Greeting
every 30 seconds. Example: “Hi, I’m still on the other line. Please
continue to hold or press pound (#) to leave a message. Press 0 for the
operator.”*
The system default Subsequent Greeting is: “<your directory name>
is still on the phone. You may continue holding or press # to leave a
message.”
*Even if you have recorded your personal greeting, the default system
greeting is used until you select and thus activate your personal greeting.
This also applies to the Initial and Subsequent greetings described below.
Changing your Password
To protect your voice mail system, memorize your password without
writing it down. Change your password frequently, and change it any time
you suspect it has been compromised.
32 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
To change your password, after pressing 4 at the Main Menu to hear the
Personal Options …
1. Press 2 for the Password options
2. Press 1 to change the password
3. Enter a new password. See “About Passwords” on page 27.
Using Message Notification
When you’re away from your desk, you can use the Message Notification
function to alert you about incoming messages. When a caller leaves a
message in your voice mailbox, the system calls the extension, phone
number or pager that you designate—the delivery phone number. The
AltiGen Voice Mail System then prompts you for your password and
places you at the Main Menu.
About the Delivery Number
When setting this delivery phone number, the AltiGen Voice Mail System
asks you to enter the number (up to a maximum of 64 digits), using the long
distance prefix 1 for out of area phone numbers. You must also identify the
type of number: extension, phone number, or pager. You don’t need to enter
the trunk, route access trunk, or route access code as part of the number.
The destination number cannot be a virtual extension or workgroup pilot
extension. Also, please see “About Outcalls to Cellular or PCS Phone
Numbers” on page 29.
If the system is unable to reach you for Message Notification or Reminder
Calls, it will play “Attempts to reach you earlier were unsuccessful” the
next time you login to the AltiGen Voice Mail System. Also, the system
cannot reach you at an outside location if there are no trunk lines available
when the system attempts to make the call.
To Set Message Notification:
After pressing 4 at the Main Menu to hear the Personal Options menu, press
3 to hear the Message Notification options, then press…
•
•
•
•
1 to enable notification for urgent messages only
2 to enable notification for all messages
3 to disable message notification
4 to set or change notification phone number, pager number, or
extension
AltiServ User Guide 33
Download from Www.Somanuals.com. All Manuals Search And Download.
•
5 to set a notification schedule, and then select one of the follow-
ing options:
— 1 to activate notification at all times
— 2 to activate notification during off hours
— 3 to setup your own notification schedule
The AltiGen Voice Mail System will prompt you for the activate
and deactivate times. If the hour digit is “1” in the case of one
o’clock for example, press # after the entry. Always enter two digits
for minutes. The AltiGen Voice Mail System will only accept 10
minute intervals such as 10:10 or 10:20 and not 10:15.
Using Reminder Calls
You can nudge your memory about important meetings, calls, or other
events by setting up a Reminder Call. The AltiGen Voice Mail System will
ring you and play back your pre-recorded message at a specified time and
date, to a specified delivery phone number. For example, you can have the
AltiGen Voice Mail System call you at home tonight to remind you to bring
a file to work the next morning!
Note: The delivery number used by Reminder Call is the same as the one
used by the Message Notification function. If you want to use a
different number than the one set in Message Notification, open the
Message Notification options by pressing 3 on the Personal
Options menu, then press 4 to set or change the delivery number.
Also, please see “About the Delivery Number” on page 33.
To Set Up a Reminder Call:
After pressing 4 at the Main Menu to hear the Personal Options menu, press
4 again to hear the Reminder Call options, then…
1. Press 2.
2. At the prompts, set the time and date for the call
If the hour digit is “1”, press # after the entry. Always enter two digits
for minutes. The AltiGen Voice Mail System will only accept 10
minute intervals such as 10:10 or 10:20 and not 10:15.
3. Record the reminder message, then press #.
4. Select one of the following:
• 1 to deliver the reminder to your extension
34 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
• 2 to deliver the reminder to the outcall number or delivery phone
number designated in Message Notification. If you want to change
this number, you need to separately.
5. Press # to confirm the message delivery.
Reviewing Scheduled Reminder Calls
If a scheduled reminder call has not been delivered, there is an additional
option on the Reminder Call menu; you can press 1 to review scheduled
reminder calls.
Call Forwarding
You can configure Call Forwarding from your phone or from a remote
location by dialing into the AltiGen Voice Mail System and following the
steps listed here:
Note: Forwarding calls to a pager is possible but not recommended
since callers will only hear what is heard when calling a pager and
might not know to enter a return phone number unless instructed.
Also, please see “About Outcalls to Cellular or PCS Phone
Numbers” on page 29.
To Set Up Call Forwarding:
After pressing 4 at the Main Menu to hear the Personal Options menu, press
5 to set up call forwarding, then…
1. Enter the destination number.
If it is an external number, begin with the outside trunk or route access
digit and any long distance prefix digits such as 1 and area code.
2. Immediately after entering the destination number, press #.
This forwards all calls to the destination number until you login and
select the call forwarding option again and disable it.
Feature Tips
Each time you login to the AltiGen Voice Mail System, you hear a Feature
Tip—helpful tips and reminders about the most useful AltiServ features.
There are a total of eleven tips and a different tip is played each time you
access the AltiGen Voice Mail System.
AltiServ User Guide 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Another way to listen to Feature Tips is by pressing #55 on your telephone.
You can listen to just one tip at a time or listen to all the tips at once.
To turn this feature off, press 6 at the Personal Options menu. This is a
toggle feature, so that if the feature is turned off, pressing 6 at the Personal
Options menu will turn it back on again.
Using Distribution Lists
Distribution lists provide a way to use a single destination number to send
messages to a group of people. You can send or forward a message to a list
just as you would to an extension. When you send a message to a list, it is
sent to everyone on the list.
You can create up to 100 distribution lists, and each list can have up to 64
entries. An entry can be an extension of any kind, including virtual or
workgroup pilots, or another distribution list, so in effect there is no
practical limit to the number of people to which you can send a single
message.
When you create lists at your station, they are your personal distribution
lists—every extension can have its own lists. There may also be system
distribution lists created by your system administrators.
Creating a Distribution List
After pressing 4 at the Main Menu to hear the Personal Options menu, press
7 to access the Distribution Lists menu, then…
1. Press 1 to Add a distribution list.
2. When prompted, enter a 2-digit number to identify the list.
3. When prompted, enter the list members, which can be one of the
following forms:
• Extension numbers.
• 01, followed by a Personal Distribution List number.
• 02, followed by a System Distribution List number.
4. The system reads back the entry to you, and you press # to save or * to
cancel the entry.
5. Repeat the previous two steps until you’ve added all the list members.
36 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Distribution List
To add or remove list members, after pressing 4 at the Main Menu to hear
the Personal Options menu, press 7 to access the Distribution Lists menu,
then…
1. Press 3 to Modify a distribution list.
2. When prompted, enter a 2-digit number to identify the list.
3. When prompted, do one of the following:
• To add members, press 1, then follow steps 3 and 4 in the
immediately preceding procedure, Creating a Distribution List.
• To delete members, press 2. When prompted, enter the member
number you want to delete. For extensions, enter the extension
number. Use 01 or 02, followed by the list number, to specify
system or personal distribution lists, respectively.
4. The system reads back the entry to you, and you press # to save or * to
cancel the action.
5. If you just added a member, you’re prompted to add another. If you
just deleted a member, you’re asked if you want to delete another.
Deleting a Distribution List
After pressing 4 at the Main Menu to hear the Personal Options menu, press
7 to access the Distribution Lists menu, then…
1. Press 2 to Delete a distribution list.
2. When prompted, enter a 2-digit number to identify the list.
3. The system reads back the entry to you, and you press # to confirm the
deletion or * to cancel.
Reviewing a Distribution List
To hear a report of list members, after pressing 4 at the Main Menu to hear
the Personal Options menu, press 7 to access the Distribution Lists menu,
then…
1. Press 4 to Review a distribution list.
2. When prompted, enter a 2-digit number to identify the list.
3. The system reports the list members one by one.
AltiServ User Guide 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Log on/off IP Extension (Dynamic IP Addressing Only)
With a few exceptions (noted below), an IP extension works exactly the
same as an ordinary, “analog” extension, with the added advantage of
letting you work remotely without any extra cabling. Features not available
on an IP extension are:
•
•
•
#81 (Hands free–Intercom mode)
#82 (Hands free–Manual answer mode)
Distinctive ringing (double ring for internal calls, single rings for
external calls)
The IP option is available only if your extension is set up to be an IP
extension by your system administrator.
If your IP extension has “dynamic” IP addressing, you must log in to an IP
extension whenever you want to use an IP connection.
To log on or off an IP extension:
• After pressing 4 at the Main Menu to hear the Personal Options menu,
press 8 to log on or off an IP extension. You do not have to call from
the same phone to log off.
While logged on to the IP extension, all calls to your extension will be
routed to the IP extension, and all calls you make will be treated as
calls originating from your extension.
While logged off the IP extension, all calls to your extension will be
routed to voicemail unless you change your default call handling
settings.
Important:Log off the IP extension when you no longer wish to use it.
Otherwise, incoming calls may be routed to another user in the
event that you lose your Internet connection.
Dynamic Messaging
AltiServ provides special Dynamic Messaging features to provide support
for business travelers who need these remotely enabled functions.
The Zoomerang feature enables you to return a call with the push of one
button while you are in the AltiGen Voice Mail System. Private Messaging
provides a way to leave a private message for callers who are difficult to
reach.
38 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoomerang
The Zoomerang feature enables the user to listen to messages in the
AltiGen Voice Mail System, make calls to the parties who left the
messages, and then return to the AltiGen Voice Mail System (like a
boomerang). For example, this feature can allow a traveler to return calls
for all messages with one call into the AltiGen Voice Mail System from a
cellular phone.
How it Works, with and without Caller ID
When you make a Zoomerang callback, the system automatically makes
the call to the number captured by Caller ID. The Caller ID information is
captured for all internal users and for external callers who have a publicly
listed, unblocked number or who have entered their callback number in the
delivery options menu after leaving the message (see “The Caller’s
Options” on page 39).
If the caller ID was not captured, the user can enter the number manually.
If it is an external number, be sure to dial the outside line access digit and
any long distance prefix digits such as 1 and area code. Also, please see
“About Outcalls to Cellular or PCS Phone Numbers” on page 29.
Zoomerang is configured for each user; check your access with your
AltiServ system administrator.
To use Zoomerang:
1. After or while listening to a new or saved message, press 5 to call the
sender of the message.
The system places the call if the Caller ID number is available.
2. If the Caller ID is not available, you can manually enter the number.
3. Press *** to disconnect from the call and return to the AltiGen Voice
Mail System.
The Caller’s Options
After leaving a message, the caller can simply hang up or press # for the
following options.
•
•
•
* to re-record the message
1 to specify delivery options
2 to attach a call back number
(If the callback number is outside of your outcall accessibility, the
AltiServ User Guide 39
Download from Www.Somanuals.com. All Manuals Search And Download.
system cannot return the call. Please check with your System Admin-
istrator for your toll restrictions.)
•
# to send the message
After pressing 2, the caller is asked to leave a call back number beginning
with the area code. To notify your callers of this option, you may want to
mention the option to leave a call back number in your personal greeting.
If the caller’s number is a publicly listed number, there is no need to enter
their callback number since AltiServ automatically captures their caller ID
information.
Private Messaging
You have the ability to leave a private, detailed message in the AltiGen
Voice Mail System for a caller in case you are not at your desk or in the
office to take the call. This feature is perfect for those who are difficult to
reach and want to leave information for callers to pick up. When you leave
a private message, the system asks callers to enter the letters of their names
(last name followed by first name) to check if they have a private message.
You can have up to five private messages at one time, so you should delete
messages that have been heard.
To Leave A Private Message:
At the Main Menu, press 5 to access the Private Messaging menu and then
proceed as follows:
1. Press 2 to record a new message.
2. At the tone, record message and press #.
3. Using the number pad, enter recipient’s last name followed by the first
name. Use 1 for “Q” and “Z”.
4. When you have finished, press #.
To Check Message Status or Delete Messages:
To check the status of private messages that have been recorded, at the
Main Menu, press 5 to access the Private Messaging menu, then press 1.
AltiServ reports the following:
•
•
•
The time and date the message was recorded.
The recipient.
Whether the message has been heard.
40 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
A replay of the message.
A prompt for you to press 1 to keep the message or 2 to delete it.
AltiGen Voice Mail System Mixed-Media
Messaging
The AltiGen Voice Mail System can send and receive communications not
only in voice mail but email. The AltiGen Voice Mail System combines
different forms of messages into a “package” called a Mixed-Media
message. You can save time and money by sending Mixed-Media
messages over the Internet to anyone throughout the world with an Internet
address, toll free.
Since all messages (voice mail, email or Mixed-Media messages) go into
the same AltiGen Voice Mail System mailbox, you need only to check one
location for all messages with your multimedia computer.
When away from the office, access Mixed-Media messaging from
anywhere using an access line from an Internet provider to download all
unretrieved Mixed-Media messages from the AltiGen Voice Mail System
Post Office.
Accessing AltiGen Voice Mail System Mixed-Media
Messages
In order to access your AltiGen Voice Mail System either in the office or
remotely via the Internet, you must configure your email client application
(e.g., Netscape Navigator 2.0 and beyond, Eudora, etc.) to recognize your
AltiWare server. Please consult the configuration manual that comes with
your email client application.
1. Go to the mail server configuration section and enter your AltiWare
server’s name or IP address in both SMTP and POP3 server fields (in
some cases, this may be the same field).
2. Go to the user configuration section and enter your name, user name,
email address, and the reply-to address (usually the same as your email
address). The email address is usually your name appended with
“@your.domain.name.” Please see your system administrator for your
organization’s domain name.
3. Click or select the Get Mail option. Some email client applications
may provide a field to cache your email password for the current
AltiServ User Guide 41
Download from Www.Somanuals.com. All Manuals Search And Download.
session so that you don’t have to enter your password every time you
click Get Mail. Be sure to enter your email password when prompted.
Retrieving Messages
To retrieve messages using your multi-media computer:
1. Configure your email application (see “Accessing AltiGen Voice Mail
System” above).
2. Click on the “Get Mail” icon.
3. All new messages, whether read or unread, are stored in the Inbox
folder. Click on the Inbox folder.
4. Individual messages should appear on the right side of the window.
Click on a message to read/listen to it.
5. To listen to an audio attachment in an email, click on the attachment to
hear the message through the computer speaker. If you do not want
others around you to hear the message from your computer, you may
listen to the audio portion of the message over the handset of your
telephone by pressing 8 at the Main Menu of AltiWare. Refer to page
page 25 for more detailed instructions on listening to messages over
the phone.
Note: Voice mail messages also appear as Mixed-Media messages in
the “Inbox” folder. Open it and click on the audio attachment
to listen to the message.
Composing and Sending Messages
To compose a new message:
1. Click or select the “To: Mail” option and enter your recipient’s email
address.
2. Type the text portion of the message (optional).
3. Send an audio attachment with or without a text message by lifting the
handset off-hook and dialing # 0.
4. As instructed by the AltiGen Voice Mail System, press 2 to record a
new audio attachment.
5. After you have finished, press # and either hang up or press 1 to listen
to, 2 to re-record, or 3 to delete the audio attachment.
42 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click the “Send” icon when finished. The AltiGen Voice Mail System
will attach the voice annotation to the email when it is sent.
Note: An audio attachment is seen only at the receiving end and does
not appear as an attachment on the email message composed by
the sender. You may copy (CC:) the message to yourself to
verify that the audio attachment has been attached and sent
successfully.
AltiServ User Guide 43
Download from Www.Somanuals.com. All Manuals Search And Download.
44 AltiServ User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
C
H A P T E R
3
Using AltiReach
AltiReach is a Web-based management tool that provides the ability to
handle AltiServ call options such as call handling, speed dialing, One
Number Access, CallView, and Message Notification using a standard
Web browser. It provides an easy-to-use interface and is accessible from
any location that has an Internet connection.
Logging In
Users can access AltiReach Call Management by using any popular
browser. To use the CallView function, the browser must be Java capable.
AltiServ 4.5 User Guide 45
Download from Www.Somanuals.com. All Manuals Search And Download.
To access and log in to AltiReach:
1. Obtain your organization’s AltiReach URL address from the system
administrator. It will be in the form http://[servername]/altireach
2. Open a web browser and go to the AltiReach URL address, where you
login by entering your first and last name, extension, and password
(see (see Figure 1 on page 46).
Figure 1. AltiReach Login page
The Main Menu
After login, you arrive at the main menu, which provides access to the
following functions:
•
•
•
•
Call Management
Station Speed Dialing
CallView—a view of extension activity
One Number Access
46 AltiServ 4.5 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Message Notification
Figure 2. AltiReach Main Menu
The remainder of this chapter describes these functions.
AltiServ 4.5 User Guide 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Call Management
The Call Management page provides for setting up incoming call handling.
Figure 3. Call Management Setup page
Forwarding All Calls
If you want to forward calls to an external number, enter the number,
including the outside trunk or route access digit and any long distance
prefix digits such as 1 and area code.
Forwarding to a Pager Not Recommended
Forwarding calls to a pager is possible but not recommended since callers
will only hear what is heard when calling a pager and might not know to
enter a return phone number unless instructed.
48 AltiServ 4.5 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Do Not Disturb
If you select Enable Do Not Disturb, all incoming calls are forwarded
according to your “Enable Busy Call Handling” settings, described
immediately below.
Busy Call Handling and No Answer Handling
You can use these options to specify how you want to handle incoming
calls when you’re already on the phone or when you can’t answer the
phone, for example, when you’ve enabled Do Not Disturb.
If you want to use the Auto Attendant and you don’t know the number of
the phrase or menu you want to use, check with your system administrator.
Number of Rings Before Forwarding
This setting pertains to almost all the options in this window: the number
of times the phone should ring before the system decides to forward the call
to an extension, voice mail, or the Auto Attendant.
Email Forwarding
To forward email:
1. Select the Enable Mail Forwarding check box.
2. Select the Forward Email check box, and type in the email address to
which to forward the mail.
3. Choose whether you want the original address’s mail to be deleted,
treated as new, or treated as read and saved mail after it is forwarded.
AltiServ 4.5 User Guide 49
Download from Www.Somanuals.com. All Manuals Search And Download.
One Number Access (ONA)
If you are expecting calls that you want to receive regardless of where you
are, you can have the system forward those calls to you. You must enter the
Caller IDs for the calls you want forwarded, and the numbers where you
can be reached.
If the system is unable to connect the call (i.e., can’t identify a Caller ID or
can’t reach you at any of the numbers you specify), the call is sent to your
voice mail.
Before You Set Up ONA
• ONA must be enabled by your system administrator.
• Your Call Handling settings must not conflict with ONA. Specifically:
— Do Not Disturb must be disabled. Otherwise, if your line is busy,
all calls will go into voice mail and not to the ONA forwarding
numbers you specify.
— Enable Call Forward must be disabled. Otherwise, all calls will be
forwarded according to this setting.
See “Setting Call Management” on page 48 for details on these set-
tings.
50 AltiServ 4.5 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing One Number Access Setup
After you set the call handling options, click the One Number Access
button on the main page to open the One Number Access page.
Figure 4. One Number Access Setup top of page
1. Select the times you want to be available to ONA callers.
If you choose Enable based on the following schedule, you can set
up to four different schedules in the Schedule section. You can enable
or disable each schedule.
2. Enable the Caller ID Verification check box and then specify the
incoming phone numbers for ONA. If ONA finds one of these
numbers on an incoming call, it will forward the call to you.
You can enter up to ten phone numbers in the Caller ID Verification
fields. For local numbers, use 7 digits (5555555). For long distance
numbers, use 10 digits—area code + local number.
Note: If you enter no numbers in the Caller ID Verification fields and
ONA is enabled, ONA is made available to every caller.
Using a Password
You can use a Caller ID Verification field to enter a password number
such as “5555” so that a caller who knows this password can use
ONA to find you, regardless of where they are calling from. Tell the
AltiServ 4.5 User Guide 51
Download from Www.Somanuals.com. All Manuals Search And Download.
caller to dial 1 during your personal greeting and then enter the pass-
word.
3. Select the Forwarding Numbers to be used by the system to find you
when ONA is active. You can set up to four different numbers—
extensions or outside numbers. For outside numbers, use the
drop-down list to select the trunk access code you want to use.
When ONA is active, the system dials the forwarding number(s) in
the order from Forwarding Number 1 through Forwarding Number 4.
Note that this number order does not correspond to the Schedule
order—Forward Number 2 is not used first during Schedule Number
2.
Note: If your system administrator has disabled the Check Password
option for your ONA settings, a call forwarded via ONA that is
picked up by a voicemail box, fax machine, or answering machine
will connect, and will not try any subsequent Forwarding
Numbers. Therefore, if you want ONA to use such an option as a
“last resort,” it should be Forwarding Number 4.
52 AltiServ 4.5 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5. One Number Access Setup bottom of page
AltiServ 4.5 User Guide 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Notification
Message Notification lets you set up how you’d like to be alerted to new
messages when you’re away from your desk. You can also set up Message
Notification through the AltiGen Voice Mail System. See “Using Message
Notification” on page 11 for more information on this feature.
Figure 6.
Message Notification setup page
Use this page to set the notification options:
•
•
•
The types of messages on which you want to be alerted: none, urgent
voice messages only, all voice messages, or all voice messages and
email too.
How and where to notify you—in the Message Notification by
calling a… options, if you want to use an outside number, use the
drop-down list to select the trunk access you want to use.
Schedule—during what hours you want to be alerted.
54 AltiServ 4.5 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Station Speed Dialing Setup
The Speed Dial Setup page, accessed by clicking Station Speed on the
main menu, lets you set up to 20 station speed dial numbers. When you add
an outside number, all relevant prefix digits such as trunk or route access
number, the long distance prefix 1 and area codes must precede the phone
number. Station speed dial numbers are also set up by using the #25 feature
code on your phone set, as described in “Other Features” on page 42.
Figure 7. Station Speed Dialing setup
AltiServ 4.5 User Guide 55
Download from Www.Somanuals.com. All Manuals Search And Download.
56 AltiServ 4.5 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|