Altec Lansing inMotion Digital Speaker System
™
for Zune
iM414v2
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Spread Your Sound Around
Power
Congratulations on your purchase of the inMotion iM414 speaker system—
the portable system with an advanced Class D amplifier, surround effect
technology and crystal-clear speakers. Its sleek design cradles your Zune
player securely and attractively as it pumps out full-range, full-bodied sound
that fills the room. The inMotion system’s twin, bass-enhanced speakers
blend power and clarity. The built-in FM radio expands your listening
options while the wireless remote increases your freedom. You can plug in
the inMotion system for AC power, or use batteries to take the music with
you. So let the music out!
Use one of the following two options to power your inMotion system:
AC Power (wall outlet)
Insert the barrel connector from the power supply into the DC connector
on the rear of the inMotion system. After this connection is made, insert the
power supply into a wall outlet.
DC Power (battery)
Install 3 AA batteries (not included) into the battery compartments in
the rear of the inMotion system. Make sure the batteries are installed as
illustrated in the battery compartment.
Box Contents
• inMotion digital speaker system
• Wireless remote
Start Playing
1. Turn on your Zune player.
2. Turn on the inMotion system by pushing the
button for
• Power supply
about 2 seconds. The LCD screen turns on.
• User’s guide and quick connect instructions
3. Press the “SOURCE” button until “Zune” is selected on the
LCD screen.
iM414v2 model made for:
4. Use the
and
buttons to navigate through your playlist.
• Zune™ 30GB, 80GB, 8GB, 4GB, Zune HD
NOTE: To avoid hearing a popping sound when you turn on your inMotion
system, always turn on your Zune player or other audio source first.
Connecting Your Zune Player
Dock your Zune player by sliding it on top of the inMotion system docking
station. If provided, first install the docking adapter that came with the
inMotion system. While the docking adapter is not required for proper
functioning of your Zune player and inMotion system, it may provide a
better fit.
Power Off
Turn off the inMotion system by pushing the
turns off.
button. The LCD screen
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FM Radio
The inMotion system features a built-in FM radio.
1. Locate a 3.5 mm stereo cable (not included).
Activate the FM radio mode:
Press the “SOURCE” button until “FM” is selected on the LCD screen.
2. Connect one end of the 3.5 mm stereo cable into the auxiliary
input jack (AUX) located on the back of the inMotion system,
and the other end to the headphone or line out jack on your
alternate audio device.
Scanning FM radio stations:
Press and hold the
incremental manner.
or
buttons to scan radio stations in an
3. Press the “SOURCE” button until “AUX” is selected on the
Programming FM radio stations:
LCD screen.
To program FM radio stations into the wireless remote, follow the steps below:
4. Set the volume on the audio source at mid-level.
1. Press the “SOURCE” button until “FM” is selected on the
5. Set the volume on the inMotion system at the minimum level
LCD screen.
and adjust to a comfortable listening level.
2. Use the
and
buttons to tune in the station to
be preset.
Adjusting the Volume
1. Press the “+” button to increase the volume to the desired level.
2. Press the “–” button to reduce the volume to the desired level.
3. To program the station in the inMotion system memory,
press and hold one of the preset buttons (P1, P2, P3) on
the wireless remote for approximately 3 seconds. The LCD
screen will display the preset number when a station has been
successfully programmed.
Surround Effect
The inMotion system features surround effect technology that widens
the stereo image. Activate this feature by pushing the
wireless remote.
Once an FM radio station has been programmed, simply press the
appropriate preset button (P1, P2, P3) on the wireless remote to select it.
button on the
NOTE: To re-program a station in the inMotion system memory, simply
repeat steps 1-3.
Bass Enhancement Technology
The inMotion system features bass enhancement technology that delivers
quality bass without a subwoofer. Activate this feature by pushing the
“BASS” button on the wireless remote.
Connecting to an Alternate Audio Source
The inMotion system includes an auxiliary input jack (AUX) that allows you
to connect to alternate audio sources, such as other MP3 player models,
CD players, portable DVD players, and PCs and laptops. To connect the
inMotion system to an alternate audio source, follow the steps below.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible Problem
Solution
The power supply cord isn’t connected to a
Insert the barrel connector from the power supply into the DC connector on
wall outlet and/or the power supply connector the back of the inMotion system. After this connection is made, insert the
is not plugged into the power supply jack on
the back of the inMotion system.
power supply into a wall outlet.
The Power LED is not lit
(AC Operation)
The surge protector (if used) isn’t powered on. If the power supply cord is plugged into a surge protector, make sure the
surge protector is switched on.
The wall outlet is not functioning.
The power isn’t turned on.
Plug another device into the same wall outlet to confirm the outlet is working.
Turn on the inMotion system by pushing the power button located to the left
of the docking station. The LCD screen will turn on.
Press the “+” button to increase the volume to the desired level.
The volume is set too low.
Check the volume level on alternate audio source device and set at mid-level.
The Zune player is not correctly seated into
the docking station.
Turn off the Zune player, remove it from the docking station, reseat it, and turn
it on again.
No sound is coming
from speakers
If using an alternate audio source, the audio
source is not properly connected to the
inMotion system or there is a problem with
the alternate audio source.
Follow the instructions in Connecting to an Alternate Audio Source.
If necessary, try connecting another audio source.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible Problem
Solution
The Zune player is not correctly seated into
the docking station.
Turn off the Zune player, remove it from the docking station, reseat it, and
turn it on again.
If using an alternate audio source, the audio
Follow the instructions in Connecting to an Alternate Audio Source.
There is a crackling sound source is not properly connected to the
If necessary, try connecting another audio source.
coming from speakers
inMotion system or there is a problem with
the alternate audio source.
If using a PC or laptop, the operating system’s Check the operating system volume level and decrease it if necessary.
volume level is set too high.
The inMotion system’s volume level is set
too high.
Press the “–” button to reduce the volume to the desired level.
Sound is distorted
There is radio interference The unit is too close to a radio tower.
Move the unit to see if the interference goes away.
Move the GSM cell phone away from the unit.
The unit is located too close to a GSM
Intermittent buzzing
cell phone.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
ALTEC LANSING ONE-YEAR LIMITED WARRANTY
What Does the Warranty Cover?
How Will State Law Affect Your Rights?
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please note that in the European Union, you as a consumer
might have other legal rights under national legislation of European Union Member
States governing the sale of Altec Lansing’s goods. Those rights are not affected by this
guarantee.
Altec Lansing warrants that its products shall be free from defects in materials or
workmanship, with the exceptions stated below.
What Is the Period of Coverage?
This warranty runs for one year from the date of purchase. The term of any warranties
implied by law shall expire when your limited warranty expires. Some states and/or
Member States in the European Union do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
The above limited warranties and remedies are sole warranties and remedies available to
purchaser, if, and to the extent, valid and enforceable under the applicable law.
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EqUIPMENT
What Does the Warranty Not Cover?
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources. For more
detailed information about recycling of this product, please contact your local city office
or your household waste disposal service.
This warranty does not cover any defect, malfunction or failure that occurs as a result
of: improper installation; misuse or failure to follow the product directions; abuse; or use
with improper, unintended or faulty equipment. (For information on proper installation,
operation and use consult the manual supplied with the product. If you require a
consequential and incidental damages are not recoverable under this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
What Will Altec Lansing Do to Correct the Problem?
Altec Lansing will, at its option, repair or replace any product that proves to be defective
in material or workmanship. If your product is no longer being manufactured, or is out of
stock, at its option, Altec Lansing may replace your product with a similar or better Altec
Lansing product.
How to Get Warranty Service
To get a covered product repaired or replaced, you must contact Altec Lansing during
email, your name, address, email address, telephone number, date of purchase and
a complete description of the problem you are experiencing. In the United States, you
may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 – please be
prepared to provide the same information. If the problem appears to be related to a
defect in material or workmanship, Altec Lansing will provide you a return authorization
and instructions for return shipment. Return shipments shall be at the customer’s
expense, and the return must be accompanied by the original proof of purchase. You
should insure the shipment as appropriate because you are responsible for the product
until it arrives at Altec Lansing.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADqUARTERS 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88. 570-296-4434. • Fax 570-296-6887
EUROPE Scorpius 140, 2132 LR Hoofddorp, The Netherlands
ASIA/PACIFIC 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008
*Sansa and 3 AAA batteries not included.
*Zune digital media player and 3 AAA batteries not included.
Specifications subject to change without notice.
1-year limited warranty (2 years in Europe; see inside for details).
© 2009 Plantronics, Inc. All rights reserved.
ALTEC, ALTEC LANSING, the Altec Lansing logo, the horn design, Altec Lansing Hear What’s Next, inMotion, Audio Alignment, iM413 and iM414 are trademarks or registered trademarks of Altec
Lansing, a division of Plantronics, Inc.
Plantronics, the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.
All other trademarks appearing herein are the property of their respective owners.
Designed by Altec Lansing in the USA. Made in China.
A13846 R01
Download from Www.Somanuals.com. All Manuals Search And Download.
|