ENGLISH
Digital
Presenter
S
P
O
TA
DP-950DXA
T
E
T
XT/
I
MG
ZO
O
A
F
M
FREEZE
IRIS
LAMP
I
N
T
/
E
X
T
A
W
C
EXT
1
E
X
T
2
HIGH RESOLUTION DIGITAL PRESENTER
USER'S MANUAL
SDP-950DXA/STA
Before attempting to operate this product, Please read the instructions carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Various image control
Digital features on your Digital Presenter provide useful and
various image controls including:
- Negative/Positive image conversion
- Brightness and R/B color control
- Image rotation
- Image save/recall
- Image freeze
- Image divide
Input source selection
You can quickly switch between your computer presentation and
your document presentation with the INT/EXT button on the
control panel or on the remote controller.
Custom user settings
To avoid any interruption of presentation to reset the digital
presenter, you can preset up to 4 customized settings in the
memory and simply recall it during the presentation.
Convenience of carrying
It is light and handy to carry. Additionally remote control
depository is attached to digital presenter.
Support GUI menu system
The SDP-950 series supports GUI menu system to control various
function of digital presenter with mouse operation.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Product features and structure
Safety precautions..................................................................5
Uses of digital presenter........................................................6
Supplied accessories .............................................................7
Name and function of each part ............................................8
Front side............................................................................8
Main control panel ............................................................10
Terminals at the back .......................................................11
On the remote controller...................................................12
Operation methods
Set preparation......................................................................14
Connecting to output device ...............................................15
PC Monitor,Projector or DVI supporting device................15
Desktop computer.............................................................16
Computer..........................................................................17
PS/2 Mouse ......................................................................17
Using the presenter ..............................................................18
To show the image received from external device ...........18
To project an object on the digital presenter.....................20
Adjusting your image ...........................................................23
Adjusting your image with GUI............................................28
Image section ..................................................................28
Digital section ...................................................................31
Miscellaneous section.......................................................35
Exit section .......................................................................37
Changing your image with Draw ........................................38
Before requesting service
Storage...................................................................................41
Trouble shooting...................................................................43
Battery replacement .............................................................44
Specifications........................................................................45
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Follow these safety instructions when setting up
and using your Digital Presenter:
1. Do not place the presenter on an unstable cart,
stand, or table.
10. Never push objects of any kind through cabinet
slots. Never spill liquid of any kind into the
presenter.
2. Do not use the presenter near water or sources of
heat.
11. Except as specifically explained in this User's
Manual, do not attempt to service this product
yourself. Refer all servicing to qualified service
personnel. Opening or removing covers may
expose you to dangerous voltages and other
hazards.
3. Use the type of power source indicated on the
presenter. If you are not sure of the power
available, consult your dealer or power company.
4. Place the presenter near a wall outlet where the
plug can be easily unplugged.
12. Unplug the presenter during lightning storms or
when it will not be used for extended periods.
5. Take the following precautions for the plug.
Failure to comply with these precautions could
result in sparks or fire:
13. Do not place the presenter and remote controller
on top of heat-producing equipment or in a
heated place, such as a car.
Do not insert the plug into an outlet with dust
present. Insert the plug firmly into the outlet.
14. Unplug the presenter from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
6. Do not overload wall outlets, extension cords, or
integral convenience receptacles. This can cause
fire or electric shock.
• When the power cord or plug is damaged or
frayed.
7. Do not place the presenter where the cord can be
walked on. It may result in fraying or damage to
the plug.
• If liquid has been spilled into the presenter, or it
has been exposed to rain or water.
• If it does not operate normally when you follow
the operating instructions, or if it exhibits a
distinct change in performance, indicating a
need for service.
8. Unplug the presenter from the wall outlet before
cleaning. Use a damp cloth for cleaning. Do not
use liquid or aerosol cleaners.
9. Do not block the slots and openings in the
presenter case. They provide ventilation and
prevent the presenter from overheating. Do not put
the presenter on a sofa, rug, or other soft surface
or in a built-in installation, unless proper ventilation
is provided.
• If it has been dropped or the cabinet has been
damaged.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Uses of digital presenter
Conference
Education
Detailed information in a report, form, table, etc. as well
as a three dimensional object, such as a model, can be
projected on a screen clearly that all the participants
can focus on the same topic during a conference. Thus
it is very helpful for an effective progress of a
conference.
It can be used as an audiovisual tool for printed
materials, such as text books, as well as audiovisual
materials, educational materials, and especially for
students' art works.
Medicine and science areas
Advertisement and design areas
It is possible to present various visual data including
slides and X-ray film etc. at a medical conference or a
doctors' association in the order of file.
It is useful in design area where visualization is
necessary. It is possible to project catalogs and
slides, thus the effect of a job can be checked easily.
Demonstration or exhibition
By connecting to a large projector, it can produce
dynamic images at a new product demonstration, an
exhibition, or an event.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
When you unpack your Digital Presenter, make sure that you have all these components.
User's Manual
C-Composite cable
DVI cable
Power cable
S-video cable
Remote controller
Lens cap
PC Monitor cable
PS/2 Mouse
USB Cable
SDP-950 program
CD
Option
Suitcase
2 Batteries
(The unit is only for SDP-950DXA)
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and function of each part
Front side
1
2
4
3
5
7
Digital Presenter SDP-950DXA
P
O
T
A
T
E
T
X
T
/IM
G
Z
AF
O
O
M
FREEZE
IRIS
LAMP
IN
T
/E
X
T
AW
C
EXT1
E
X
T
2
6
8
1
Lens
Can rotate to the front and back.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
5
6
7
8
Main support
Main lock button
Press to move the main support.
Lamp unit
(Upper lamp)
Document plate
(built-in light box)
PO
T
A
TE
D
X
A
TXT/IMG
Main control panel
IR Sensor
D
ig
ita
l
P
re
s
e
n
te
r
S
P
D
O
TAT
P
-9
5
E
0
D
X
A
TXT/IM
G
ZO
OM
AF
FREEZE
IR
IS
L
A
M
P
IN
T
/E
X
T
AW
C
E
X
T
1
E
X
T
2
ZO
OM
AF
FREEZE
IRIS
LA
M
P
I
NT
AW
C
IR
I
S
INT/EXT
Remote control depository
AW
C
E
X
T
1
E
X
T
2
Press to use the remote control.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and function of each part
Main control panel
The buttons on the main control panel can be found in the remote controller. These buttons perform the same
functions.
1
2
4
5
6
7
IRIS
INT/EXT
ROTATE
AF
EXT1
EXT2
AWC
LAMP
ZOOM
TXT/IMG
FREEZE
8
9
10
11
SDP-950DXA
3
IRIS
INT/EXT
AF
NEGA/POSI
EXT1
EXT2
AWC
LAMP
ZOOM
FREEZE
TXT/IMG
SDP-950STA
POWER
APERTURE
Use this to control the sharpness of the output
image.
Use this to turn the power on or off.
ROTATE (SDP-950DXA ONLY)
Use this to rotate the image.
FREEZE
Use this to freeze the image.
NEGA/POSI (SDP-950DXA ONLY)
Use this to turn the image negative or positive.
LAMP
Use this to turn the upper lamp or light box
on or off.
ZOOM
Use this to control the size of an object
projected on the screen.
AWC
Use this to adjust the color automatically.
AF
Use this to adjust the focus automatically.
IRIS
Use this to control the brightness of the image.
INT / EXT
Use this to select internal or external image
INT: to view the image on this product.
EXT: to view the VGA output from another device
such as a PC monitor or a projector by
connecting it to this product.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and function of each part
Terminals at the back
1
2
3
4
5
6
7
8
9
10
THE KENSINGTON SECURITY SLOT
Connect Kensington Slim MicroSaver security
cable to this slot to attach the presenter to an
DVI OUTPUT
Connect this to the monitor or projector by
supplied DVI cable.
immovable object.
VGA VIDEO INPUT 1,2
Connect this to the VGA output terminal of
another device by supplied PC cable.
When external input menu is selected, the image
is shown through the VGA out terminal.
MOUSE
Use this to connect PS/2 Mouse. (See page 17.)
VGA VIDEO OUTPUT 1,2
Connect this to the RGB input terminal of a PC
monitor or a projector by supplied PC cable.
RS-232C: COMPUTER CONNECTION
TERMINAL
Use this to connect RS-232C cable.
S-VIDEO OUTPUT
This is the video output terminal connecting to a
TV that has S-video input terminal.
USB: COMPUTER CONNECTION
TV OUTPUT
TERMINAL
Use this to connect USB cable when transmitting
image by USB port.
Connect this to the TV input terminal.
Even when the external input menu is selected,
only the image on the main unit is displayed on
TV output terminal.
POWER INPUT TERMINAL
Use this to connect the power cable. (100 - 240V,
free voltage)
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and function of each part
On the remote controller
PO
WER
3
4
1
2
INT/EXT
TXT/IMG
FOCUS
LAMP
F
RED
2
5
1
BLUE
3
+
N
4
+
6
9
AF
7
8
5
7
AW
C
6
8
3X3
Nega/P
osi
10
11
FREEZE
BRIGHT +
R
WIDE
O
12
TAT
E
14
EXIT
BRIGHT -
TELE
15
13
NTSC/P
A
L
PRESET
16
SA
VE
RECALL
SA
VE
17
18
DIVIDE
A
CTIVE
SHIFT
DIGIT
AL PRESENTER
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
Turns power on or off.
ROTATE (For the SDP-950DXA ONLY)
Use this to rotate the image by 90˚, 180˚, 270˚,
0˚.
INT/EXT
Allows to choose the signal inputs to be
displayed.
WIDE/TELE
• Reduces the image size.
• Enlarges the image size.
TXT/IMG
Controls the sharpness of the output image.
Switches for TEXT mode or IMAGE mode.
+
-
BRIGHT / BRIGHT
• Increases the brightness.
• Decreases the brightness.
LAMP
EXIT (For the SDP-950DXA ONLY)
Stops current function and returns to the normal
mode.
Turns the upper lamps and/or lightbox on or off.
FOCUS
Allows to focus on an object.
F: Used to focus on an object which is in the far
distance.
NTSC/PAL
• Switches Video output mode to NTSC or PAL.
N: Used to focus on an object being close.
RED/BLUE/AWC
PRESET
Adjusts the image color.
• SAVE:saves the customized user setting values.
• ACTIVE:activates the preset user settings.
R +/-: Adjusts the red color.
B +/-: Adjusts the blue color.
AWC: Adjusts color automatically.
SAVE/RECALL
(For the SDP-950DXA ONLY)
• Saves the projected image into the memory of
this unit.
AF
Use this to adjust the focus automatically.
• Recalls the image from the memory.
NEGA/POSI
Switches for negative or positive film.
DIVIDE
Divides the screen to show both the current
image and the image recalled from the memory
simultaneously on one screen.
FREEZE
Keeps the current image on the screen.
SHIFT
3X3 MODE (For the SDP-950DXA
ONLY)
Switches to 3X3 Multi ON or 3X3 Multi OFF.
Shifts the recalled image shown in the divided
screen from the left to right to show the hidden
portion of the image.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Set preparation
Raise the lamp unit until it is
convenient for use, and set it to
the center of the document plate.
Press the main lock button and
raise the main support
1
3
5
2
Digital Presenter SDP-950DXA
2
1
D
ig
it
a
l
P
r
e
s
e
n
te
r
P
O
S
D
P
-9
T
A
T
5
E
0
D
X
A
T
X
T
/IM
G
D
ig
it
a
l
P
r
e
s
Adjust the angle of the lamps
properly.
Turn the lens area to face
downward.
4
Remove the lens cap.
Plug the power cord in.
6
110V
220V
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to output device
PC Monitor, Projector or DVI supporting devices
Connect a TV, PC monitor, Projector and DVI
supporting devices(Monitor or Projector)to this
presenter to display the projected images using the
appropriate cable.
Di
gi
ta
l
P
re
se
nt
er
SD
PO
T
P-
A
95
TE
0D
XA
TX
T/
IM
G
ZO
O
M
AF
FRE
I
RI
EZE
S
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
EX
T2
Connection
Connect to the
VGA input terminal
PC monitor cable
PC monitor, projector, etc
Digital Presenter
DVI cable
Connect to the DVI input terminal
Monitor, projector, etc
Digital Presenter
Digital Presenter
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to output device
Connecting Computer
Connect a desktop PC and the presenter using USB
cable and install the supplied program. You can see
the projected image on the PC monitor and control the
image using the program.
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to control
the projected image on PC. Ask your dealer for further
details.
Di
gi
ta
l
P
re
se
nt
er
SD
PO
T
P-
A
95
TE
0D
XA
TX
T/
IM
G
ZO
O
M
AF
FREE
I
RI
S
ZE
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
EX
T2
USB connection
Connect to the USB port on your PC,
Digital Presenter
then install the supplied SDP-950 Series program.
We recommend you to connect to USB port which is attached on computer main board.
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 5.0 m.
Caution
RS-232C connection
Digital Presenter
Connect the cable to the
RS-232C terminal on your PC.
RS-232C cable is not provided with the presenter.
You can obtain one from your computer dealer.
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to output device
If you connect a computer
through VGA IN port, you can
receive video signal from the
computer.
Di
gi
ta
l
P
re
se
nt
er
SD
PO
T
P-
A
95
TE
0D
XA
TX
T/
IM
G
ZO
O
M
AF
FREE
IR
IS
ZE
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
EX
T2
Connection
Connect the cable to the
VGA input terminal
Digital Presenter
PC monitor, projector, etc.
Connect to VGA IN terminal using the VGA cable from the computer. VGA IN terminal is available.
Connect the cable to VGA port on the computer equipped with XGA, SXGA, UXGA graphic card.
PS/2 Mouse
If you connect PS/2 mouse through MOUSE port, you can control various functions of digital presenter.
(See page 28.)
Kensington Security Slot
Secure your presenter in seconds by wrapping the sleek, strong steel cable around an immovable object,
inserting the lock into the Kensington Security Slot, and turning the key.
The security cable is not
provided with the presenter.
You can obtain one from your
computer dealer.
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the presenter
To show the image received from external devices
1
Set up your digital presenter properly.
(See page 15.)
D
ig
ita
l
P
re
se
nt
er
S
P
O
T
A
D
P
-9
50
T
E
D
X
A
T
X
T
/I
M
G
Z
A
F
O
O
M
F
IR
IS
R
E
E
Z
E
LA
M
P
INT/
E
XT
A
W
C
EX
T1
EX
T2
2
3
Connect the input device from which you want to receive the image and the output device in which you
want to show the image.
(See pages 15 through 17.)
Turn the power of the input and output device on, and the digital presenter on.
When the digital presenter is powered on, the upper lamp turns on.
To turn it off, press LAMP button of the presenter twice.
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the presenter
4
Choose the video source with the INT/EXT button of the presenter.
• Each time you press the button, the display shows
EXT1 OUT, EXT2 OUT, INT OUT.
• EXT1 OUT, EXT2 OUT
View the image from an external VGA output
device through a PC monitor or a projector
connected to the digital presenter.
• INT OUT
Choose this mode to show the image through the
lens of the digital presenter.
• If Blank Image is displayed, check if the external input device is connected properly.
• Although you select INT or EXT1/EXT2, the current status is not displayed.
• By DVI port you cannot recieve the image from external device.
5
Open the image on the computer. Now you see the image through a PC monitor or a projector.
Di
gi
ta
l
P
re
se
nt
er
SD
P-
95
0D
P
O
T
A
TE
XA
TX
T/
IM
G
ZO
O
M
AF
FRE
EZE
IR
IS
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
EX
T2
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the presenter
To project an object on the digital presenter
1
Set up your digital presenter properly.
(See page 15.)
Di
gi
ta
l
P
re
se
nt
er
SD
P-
95
0D
P
O
T
A
TE
XA
TX
T/I
M
G
ZO
O
M
AF
FRE
E
I
RI
S
ZE
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
EX
T2
2
3
Connect the presenter to a PC monitor or projector to display the image.
(See page 15.)
Turn the power of the output device and the digital presenter on.
4
Place the object on the document plate, and adjust the head to
face the object.
Di
gi
ta
l
P
re
se
nt
er
SD
P-
95
0D
P
O
T
A
TE
XA
TX
T/IM
G
ZO
O
M
AF
FRE
EZ
IR
IS
E
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
EX
T2
If there is no image on the PC monitor or the projector, check if the cable is properly
connected and press the INT/EXT button of the presenter to select the input mode to INT OUT.
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the presenter
5
Select a proper lighting source with the LAMP button of the presenter. Each time you press the button,
upper lamps on, lightbox on, then all lightings off.
AW
Upper lamps. Use the upper lamps to project paper
documents and other materials, and use lightbox
lamp to project transparencies.
Lightbox.
D
ig
it
a
l
P
re
s
e
n
te
r
P
O
S
D
P
T
-9
A
5
T
E
0
D
X
A
T
X
T
/I
M
G
Z
A
F
O
O
M
F
R
IR
IS
E
E
Z
E
L
A
M
P
IN
T
/E
X
T
A
W
C
E
X
T
EXT2
1
• It wil take two minutes to project on the optimum brightness after turning on presenter.
And then you can execute AWC button to adjust the color status.
6
Remove or attach the adapter lens according to the object.
Rotate the lens to
remove or attach it.
• Remove the adaptor lens in the camera mode.
(possible focal length: 1m ~ ∞)
• Attach the adaptor lens to view a material or a
document or a film placed on the document plate.
(possible focal length: 240mm~365mm)
• Beyond the possible focal length mentioned above, it
might be out of focus. So pay attention to the
distance between the object and the lens.
D
ig
it
a
l
P
re
s
e
n
te
r
P
O
S
D
P
T
-9
A
5
T
E
0
D
X
A
T
X
T
/IM
G
Z
A
O
F
O
M
F
R
IR
IS
E
E
Z
E
L
A
M
P
IN
T
/E
X
T
A
W
C
E
X
T
EXT2
1
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the presenter
7
Focus on the object.
• Auto focus control: Press AF button.
• Manual focus control: press [Focus F] or [Focus N] to adjust manually.
A
8
You see the image on the PC monitor or the projector or DVI supporting devices
(monitor or projector)
• To use versatile image control features, see pages 23 through 27.
Di
gi
ta
l
P
re
se
nt
er
SD
P-
95
0D
P
O
T
A
TE
XA
TX
T/I
M
G
ZO
O
M
AF
FR
EE
ZE
I
RIS
LA
M
P
IN
T/
EX
T
A
W
C
EX
T1
T2
EX
To change the object projected during presentation, freeze the image on the screen by using
FREEZE button of the presenter and change it.
To release the FREEZE mode, press FREEZE button again or EXIT button on the remote controller.
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image
Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected
image. Some of the main features are described below:
Adjusting image size
Press WIDE or TELE button on the remote controller to change the image size displayed on the screen.
You can also use ZOOM
or ZOOM
button of the presenter to achieve the same result.
Adjusting brightness
S
Press IRIS
Press IRIS
button on the control panel or IRIS + button on the remote controller to lighten the overall image.
button on the control panel or IRIS - button on the remote controller to darken the overall image.
IRIS
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image
Adjusting image color
For automatic color adjustment, press AWC button.
If you want fine level adjustment, press BLUE + / - or RED + / - button on the remote controller to increase or
decrease blue or red color factor manually.
BLUE 90
I I I I I I I I
Hint:
To obtain the best result, put the camera lens facing
the white paper and press AWC button.
The color level will
be displayed.
Positive and negative switching
Press NEGA/POSI button.
Each time you press the button, POSI or
NEGA appears alternately on the screen.
Set to POSI to see normal object and set
to NEGA to see negative film.
Image sharpness control
Press APERTURE button to control the sharpness of the output image of this product.
- APERTURE ON: For a material mostly with words.
- APERTURE OFF: For a material with many pictures or colors.
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image
Image rotate control (SDP-950DXA Only)
For image rotation, press ROTATE button.
To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button.
R
O
T
A
TE 90
˚
The rotate image status
will be displayed.
NTSC/PAL switching
Switches Video output mode to NTSC or PAL.
Saving image in memory (SDP-950DXA Only)
You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to
recall it.
To save the image into the memory, press SAVE
button and specify the memory location within 4
seconds using the number keys from 1 through 8.
If you want to recall the saved image from
memory, press RECALL button and press the
memory location number within 4 seconds. If you
press and hold down RECALL button, all images
saved in memory are displayed one by one.
If you want to exit from the recall mode, press
EXIT button.
The memory location numbers are printed on the right
side of these buttons. For example, if you want to
save the image into memory location 7, press SAVE
then press AF button printed 7 at right side
.
• If you turn the power off, all the saved images will be lost.
• The image is not saved in the Rotate or Freeze status.
• Digital zoom picture is not saved, therefore when you press SAVE button under
digital zoom mode, the digital presenter automatically returns to the maximum optical
zoom state.
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image
Screen 2 divide and image shift (SDP-950DXA Only)
You can see both the image of an object currently projected and the image saved in memory simultaneously on
one screen.
Press DIVIDE button and press the memory location
number within 4 seconds to recall the image you want
to see.
To cancel this mode and return to normal mode, press
EXIT button.
The digital zoom is not available in DIVIDE mode,
therefore when you select DIVIDE mode under digital
zoom mode, the digital presenter automatically returns
the right live picture to the maximum optical zoom state.
You can see the
image of an object
currently projected
at right side.
The recalled image from memory appears
at left side. Press SHIFT button to shift the
image from right to left. Each time you
press the button, a third of the image will
be moved from right to left.
3x3 Multi-Screen (SDP-950DXA Only)
You can see all the images saved in memory simultaneously on one screen and choose one to display it.
Press 3x3 button for 2 seconds or more, then all
the images saved in memory are displayed on the
screen.
To cancel this mode and return to normal mode,
press EXIT button.
1
4
6
2
3
5
8
3X3 Divide Mode
7
When you want to see one of them, press the
number button to recall it.
For example, if you want to see the image in
memory location 3, press BLUE + button and
the image is displayed on the screen.
1
4
6
2
3
5
8
3X3 Divide Mode
3
7
Page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image
Saving custom user setting
After you adjust feature value, you can save the value for next time use. You can save up to 4 different custom
user settings. (You can save the setting on the Zoom, Focus, Iris, Lamp state and Color level buttons.)
To save the current value, press SAVE button
and specify the memory location within 4 seconds
using the number keys from 1 through 4.
To recall your custom setting, press the ACTIVE
button and press the memory location number
within 4 seconds.
The memory location numbers are printed on the
right side of these buttons, For example, if you want
to save the feature into memory location 4, press
SAVE then press FOCUS N button printed 4 at right
side.
You can not save the setting on the FREEZE, RECALL, DIVIDE, SHIFT and ROTATE
functions.
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
The SDP-950 supports GUI menu system to control various function of digital presenter with mouse operation.
To use GUI menu system, first of all, mouse device (PS/2 type) must be connected to mouse control terminal, if
it is connected with success, mouse pointer will be appeared on the screen.
And then, click the right mouse button, GUI main menu is appeared on the screen, and GUI menu system is
activated.
When [Exit] menu is clicked, GUI main menu disappears and only the mouse pointer remains displayed.
Mouse device Connection
Main GUI menu appearance
Mouse move and left button click
Function execution
Mouse pointer appearance
Right button Click
[Exit] Menu Click
Main GUI menu disappearance
Menu and Functions
Image section
1
Image menu deals with various adjustment functions of on-screen image.
Page 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Focus
Allow to focus an object in the far / near distance, or automatically.
When holding down [Far]/[Near] menu with the left mouse button, focus is activated.
Click [Auto] menu to work auto focus function.
Zoom
Allow to change the image size.
When holding down [Tele]/[Wide] menu with the left mouse button, zoom is activated.
Bright
Allow to change IRIS to increase or decrease the brightness.
When holding down [Up]/[Down] menu with the left mouse button, lens iris is activated.
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Red / Blue
Allow to adjust image color through the red/blue gain control
When holding down [Up]/[Down] menu with the left mouse button, red/blue gain control is activated.
AWC
Allow to adjust image color automatically through automatic white balance control
When you click [AWC] menu with the left mouse button, AWC function is executed once.
Page 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Digital section
2
Digital menu deals with various digital image processing functions.
Freeze
Allow to keep the current image on the screen. Click[Freeze] menu with the left mouse button, freeze mode is
activated and [Freeze] menu turns checked state. To release freeze mode, click [freeze] menu again or click
[Cancel] menu with the left mouse button (and then [Freeze] menu turns unchecked state).
Rotate (For the SDP-950DXA Only)
Allow to rotate the image by 0˚(Off), 90°, 180°, 270°. Click [0°/90°/180°/270°] menu with the left mouse button,
image is rotated by user’s request and menu turns checked state following current status of image.
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Save / Recall (For the SDP-950DXA Only)
Allow to save the projected image into the memory of digital presenter or recall the image from the memory.
To save / recall the image with the proper save number, Click [numbers] menu with the left mouse button,
current image is saved into or recalled from memory.
Page 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Divide (For the SDP-950DXA Only)
Allow to divide the screen to show both of the current image and the image recalled from the memory
simultaneously on one screen.
Click [numbers] menu with the left mouse button, screen is divided and selected number of the image is
recalled from memory.
Shift (For the SDP-950DXA Only)
Allow to shift the recalled image shown in the divided screen to show the hidden portion of the image.
Click[Shift] menu with the left mouse button, image is shifted from right to left step by step on each request in
the divide mode.
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
3x3 Multi (For the SDP-950DXA Only)
Allow to see all the images in the memory (up to 8 frames) on one screen.
Click [3x3 Multi] menu with the left mouse button, 9 divide mode is activated and
GUI menu disappeared. If you click the image number on screen, selected image will be expanded to full
screen and GUI menu is appeared on the screen.
To Release 3x3 Multi mode, click the center image.
Cancel (For the SDP-950DXA Only)
Allow to stop the current function and return to normal mode.
Click [Cancel] menu with the left mouse button, all digital function is released.
Page 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Miscellaneous section
3
Misc menu deals with miscellaneous function of digital presenter.
Preset Save / Exe
Allow to save the customized user setting values or to activate the preset user setting.
Click [numbers] menu with the left mouse button, current setting value is saved to flash ROM or load setting
value from flash ROM.
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
NEGA Effect
Allow to switch for negative / positive image (default : positive). Click [NEGA Effect] menu with the left mouse
button, current image turns negative image and menu turns checked state. To return positive image, click
[NEGA Effect] menu again (and then menu turns unchecked state).
Aperture
Allow to control the sharpness of the output image (default : On). Click [Aperture] menu with the left mouse
button to turn on/off aperture mode. (Image mode / Text mode)
Video Out
Allow to switches video output mode to NTSC or PAL.
Click [NTSC/PAL] menu with the left mouse button, video mode is switched to current value.
Page 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your image with GUI
Lamp
Allow to turn the upper lamps or lightbox on or off.
Click [All off/Upper/Lower] menu with the left mouse button, lamp mode is switched to current value.
Exit section
4
GUI main menu disappears and only the mouse pointer remains displayed.
Tips : Drag and Drop Function
GUI main menu can take any position of screen using Drag and Drop.
First of all, click the moving point of main menu, and then drag and drop to any position of screen where you
want.
1. Click the moving point image
2. Drag the GUI main menu
3. Drop the GUI menu
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing your image with Draw
SDP-950 series support to GUI Drawing system to draw straight lines, freehand lines, rectangular on the
screen with mouse operation.
To use GUI Drawing system, first of all, GUI menu system and [Freeze] or [Recall] function must be activated.
Then Draw menu is now being activated. (See page 28)
When [Draw] menu is clicked, GUI Draw toolbar is appeared on the screen and GUI main menu disappeared.
[Freeze] or [Recall]
GUI menu Activated
Function activated
[Draw] Menu Click
[Draw] Menu Activated
GUI Draw Toolbar appearance
Draw Function Execution
Draw toolbar disappeared.
GUI menu appearance
button Click
[1] Exit Button
[5] Line Width Selection
[2] Tool Selection
[3] Foreground / Background Color Panel
[4] Foreground / Background Color Palette
Page 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing your image with Draw
Exit Button
1
2
Use the Exit button ( ) to exit GUI Drawing system to normal mode, or clear all the user’s images on the
full screen.
Tool Selection
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Drawing the single line
To draw a single line, Click the single line icon and then,
1) Position the cursor on the screen where you want the line to start.
2) Press and hold the left/right mouse button.
3) Drag the mouse.
4) To end the line, release the mouse button. SDP-950 Series creates the line.
Drawing the rectangular
To create a rectangular, Click the rectangular icon and then,
1) Place the cursor at a corner of the area you want to select.
2) Click and drag the mouse until the selection is the size you want.
3) Release the mouse button.
Drawing the freehand line
To create a freehand line, Click the freehand line icon and then,
1) Position the cursor on the image where you want the line to begin.
2) Press and hold the left/right mouse button.
3) Drag the mouse on the path you want the line to take.
4) Release the mouse button.
Eraser Tool
1) Click the Eraser tool icon and then the cursor changes to the erasing rectangular.
2) Move the cursor over the line and click to delete the line.
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing your image with Draw
Foreground / Background Color Panel
3
There are two active colors in GUI Drawing System, the foreground (left mouse click) and
background(right mouse click) colors.
You can change the brush colors by selecting new foreground and background solid colors using the Color
Palette.
Foreground / Background Color Palette
4
Use the Color Palette to select the colors that you want to draw the line.
Move the cursor over the available colors panel. Click left button to select a foreground color, click right
button to select a background color. The two boxes above the Color Panel display the respective colors.
There are six colors to be selected, red, yellow, green, cyan, blue and magenta.
Line Width Selection
5
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Page 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
Turn the power off and unplug the
power cord.
Attach the lens cap.
1
2
4
Digital Presenter SDP-950DXA
P
O
TAT
E
TXT/IMG
ZOOM
A
F
F
R
E
IR
IS
E
Z
E
LA
M
P
INT/EXT
AW
C
EXT1
EXT2
Fold the middle of the head backward.
While you pull the main lock button
toward the front of the presenter, fold
the head completely.
Turn the head upside down.
3
D
ig
ita
l
P
re
s
e
n
te
r
S
P
D
O
TA
P
T
-9
5
0
E
D
X
A
T
XT/IM
G
ZOOM
A
F
F
R
IRIS
E
E
Z
E
L
A
M
P
INT/EXT
AW
C
EXT1
T2
EX
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Fold the lamps on both sides completely.
5
Digital Presen
ter SDP
P
Digita
O
TA
T
-950DXA
l
P
resenter SD
E
PO
TA
P-9
T
T
50DXA
E
XT/IMG
TXT
/IM
G
ZO
AF
O
M
ZOOM
AF
FR
EEZE
IRIS
FR
E
LAMP
IRIS
EZ
E
IN
T
/E
XT
A
W
LAMP
C
E
IN
T
X
T
/E
X
1
E
X
T
T
2
A
W
C
E
X
T1
EX
T2
Digital
P
resente
r
SDP-95
PO
T
AT
0DX
E
Digital Prese
A
nter SDP-950DXA
TXT
P
O
TA
T
/IM
G
E
TXT/IMG
Z
AF
OOM
FR
EE
ZE
ZO
AF
IRIS
OM
`¶
‚
IN
T
FREEZ
/E
XT
IRIS
A
E
W
C
EXT1
LAMP
E
X
IN
T/E
T
2
X
T
A
W
C
E
X
T
1
E
XT2
When you do not use it for a long time,
protect it with the suitcase supplied. (SDP-950 DXA only)
Page 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
No image appears
- Check if the resolution of the output device corresponds to that of the digital presenter.
(For example, when the maximum resolution of a projector is SVGA and if the digital
presenter is set to XGA, then no image appears.)
- Check if the input selection of the output device is appropriate.
- Check if the iris control is adequate.
- Check if the VGA cable is connected to the VGA output terminal correctly.
- Check if the lens cap is removed.
No communication between the PC and USB.
- Make sure the operating system is Windows 98 or later. It doesn't work on Windows 95.
- For other detailed information, please refer to the program manual supplied with the product.
No image from a slide film or a negative film.
- Check if the light box is turned on.
- Adjust the lens to face the film directly.
- Check if the NEGA/POSI button is selected properly.
remote controller is not working.
- Check the battery of the remote controller.
Replace it with a new one.
The image is out of focus.
- Check if the adaptor lens is attached properly for the purpose. (See page 21.)
- Check if the distance from the object is too short.
When you use GUI, the
mouse is not seen or does
not work normally.
If there are problems,
please contact the store
you purchased the
product or our distributor
nearest you.
- Check the contact condition of mouse
port and make sure it's mouse offered by
Samsung Techwin.
(It may not work if it's not mouse offered by Samsung Techwin.)
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery replacement
Open the battery compartment lid
at the back of the remote controller.
Insert new batteries.
• Battery type:AAA type 1.5V
Close the lid.
Random replacement of built-in battery by other types of batteries may cause explosion.
Thus, the battery shall be replaced by the same battery. And the used batteries shall be
disposed carefully because they can cause environment pollutions.
Caution
Page 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Note: Specifications are subject to change without notice.
Specifications
Description
Lens
Shooting Area
Zoom
F=1.5(Wide)~2.1(Tele) f=5.2~66.5, 12x power zoom
Max: 299 x 244mm ,Min: 21 x 16mm
Powered (12x), Digital (3X)
Optical system
Focus
Iris
Powered (Auto Focus / Manual)
Auto (with fine level adjustment)
Upper
Lower
Attached to the side arm of the main unit
Light box (built-in main unit)
Illumination system
Pick-up Device/
Effective pixel
1/3" 850,000 pixels PS CCD / 1034(H) x 779(V)
Frame rate
Sync system
VGA output
20 frame/sec
Internal sync.
1024 x 768(XGA) RGB color
C-Video VBS 1.0Vp-p / 75Ω (unbalance)
S-Video Y: 1.0Vp-p / 75Ω (unbalance)
C: 0.286Vp-p / 75Ω (unbalance)
Manual / Auto (one touch type)
Selectable
Video output
White Balance
Negative / Positive
Freeze
built-in
Video
Input terminals
VGA:2
VIDEO:1, VGA:2, USB:1,
DVI:1, RS-232C:1, S-Video:1
Selectable
Output terminals
NTSC / PAL
Remote controller
Supplied
GUI(Graphic User Interface) Supplied
Input selection
On-screen display
Image freeze
Image save
Image recall
Image divide
Image rotation
Image transfer to computer
Preset function
USB
3 channels (Internal: 1, External: 2)
Available
Available
Available (8 frames) (SDP-950DXA ONLY)
Available (8 frames) (SDP-950DXA ONLY)
Available (2/9 divide) (SDP-950DXA ONLY)
Available (SDP-950DXA ONLY) (90˚, 180˚, 270˚)
Available (USB: QUAR, HALF, FULL, SCREEN FULL)
Up to 4 user settings
built-in
RS-232C
SET control
PC connection
Application software
Viewer (for Windows 98, 98SE, ME, 2000 Professional,
XP), TWAIN Driver (for windows), AVI Capture for Windows
Mac Program(Mac OS 10.2)
Operating temperature/
Humidity
+5˚C ~ +35˚C, 30% ~ 90%
Power
DC12V (Adaptor INPUT: AC100V~240V Free Voltage,
50/60Hz, OUTPUT: 12V, 4.0A)
General
In-use: 650(W) x 566(H) x 407(D)
Storage: 477(W) x 154(H) x 407(D)
4.8kg
Dimensions(mm)
Weight
Accessories
Remote controller, Cables, etc., Suitcase (SDP-950DXA Only)
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
|