Datasheet | Port Interface Cards
AT-AR02X Series
Port Interface Cards (PICs)
1
Maximize Flexibility
Providing an array of physical interfaces, Port
Interface Cards (PICs) offer flexibility when
configuring AlliedTelesis routers and Rapier L3
switches to work in a variety of network
topologies and physical media. Users can modify
or replace PICs to meet changing network
requirements—or they can enhance perform-
ance via the cards’ on-board I/O controllers.
AT-02X Product Compatibility
Key Features
AT-AR020
AR410, AR410S, AR415S, AR440S,
AR441S, AR442S, AR720, AR725, AR740,
AR745, AR750S, AR750S-DP, AR770S, Rapier
16f, Rapier 16fi, Rapier 24, Rapier 24i,
Rapier 48w
• Maximum flexibility
TM
• Interoperable with AT-AR series routers
and Rapier L3 switches
• Compact size
AT-AR021S (V3)1 AR410, AR410S, AR415S, AR440S,
AR441S, AR442S, AR720, AR725, AR740,
AR745, AR750S, AR750S-DP, AR770S, Rapier
16f, Rapier 16fi, Rapier 24, Rapier 24i,
Rapier 48w
Ordering Information
AT-AR020
Single software configurable E1/T1 interface supporting
channelized/unchannelized Primary Rate ISDN/Frame Relay
Order Number: 990-001304-00
Reduce Networking Life-cycle Costs
By taking advantage of AlliedTelesis’s wide
range of PIC options, your company can be
assured of graceful migrations from one inter-
face to another without having to replace core
equipment, resulting in reduced capital, training,
deployment, and management requirements as
your network evolves.
AT-AR023
AR410, AR410S, AR415S, AR440S,
AR441S, AR442S, AR720, AR725, AR740,
AR745, AR750S, AR750S-DP, AR770S, Rapier
16f, Rapier 16fi, Rapier 24, Rapier 24i
AT-AR021S (V3)1
Single Basic Rate ISDN (S/T) interface
Order Number: 990-002153-00
AT-AR024
AR410, AR410S, AR415S, AR440S,
AR441S, AR442S, AR720, AR725, AR740,
AR745, AR750S, AR750S-DP, AR770S, Rapier
16f, Rapier 16fi, Rapier 24, Rapier 24i,
Rapier 48w
AT-AR023
Single Synchronous port up to 2Mbps to an external
CSU/DSU (AT-V.35-DTE-00 or AT-X.21-DTE-00 cable required)
Order number: 990-001104-00
2-Port FXS-VoIP PIC
The AT-AR027 FXS (Foreign Exchange Service)
PIC provides low-density, high-quality, full-duplex,
inter-site voice/fax communication over IP.
Combined with an AlliedTelesis router or
Rapier Layer 3 switch it will allow up to eight
telephones or faxes to be connected to a Local
Area Network.
AT-AR027
AR410, AR410S, AR415S, AR440S,
AR441S, AR442S, AR720, AR725, AR740,
AR745, Rapier 16f, Rapier 16fi,
Rapier24, Rapier 24i
AT-AR024
Four Asynchronous RS232 interfaces to 115Kbps
Order number: 990-001105-00
1
Please check the hardware reference manual for appropriate
PIC combinations.
AT-AR027
Two VoIP FXS ports
Order number: 990-001356-00
Industry Standard Compatibility
The AT-AR027 fully complies with Industry
Standard Protocols, such asVoIP, H.323 v2, SIP,
G.711 A/µlaw, G.723.1 and G.729 A/B (optional).
1
®
AR021S (V3) requires AlliedWare Operating System
version 2.9.1-13 or later
High Quality ofVoice
The AT-AR027 also provides support for
various voice CODECs i.e. G.711 (A/µlaw)
vocoder 64Kbps, G.723.1 (5.3 and 6.3Kbps) and
G.729 A/B (8Kbps) (optional).
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters |Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
© 2008 AlliedTelesis Inc.All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-00457-00 Rev. J
Download from Www.Somanuals.com. All Manuals Search And Download.
|