Alliance Laundry Systems Washer SW039 User Manual

Washer-Extractors  
Cabinet Freestanding  
Keep These Instructions for Future Reference.  
(If this machine changes ownership, this manual must accompany machine.)  
Part No. 9001014R5  
July 2008  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Introduction.........................................................................................  
2
Table of  
Contents  
Safety Information..............................................................................  
3
Specifications and Dimensions...........................................................  
7
Installation........................................................................................... 21  
Operation............................................................................................. 27  
Disposal of Unit................................................................................... 29  
© Copyright 2008, Alliance Laundry Systems LLC  
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any  
means without the expressed written consent of the publisher.  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Introduction  
Model Identification  
Information in this manual is applicable to these  
models:  
HX18PV  
HX25PV  
HX35PV  
HX55PV  
HX75PV  
SX18PV  
SX25PV  
SX35PV  
SX55PV  
SX75PV  
UX18PV  
UX25PV  
UX35PV  
UX55PV  
UX75PV  
UX100PV  
UX135PV  
UX165PV  
HX100PV  
HX135PV  
HX165PV  
SX100PV  
SX135PV  
SX165PV  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation/Operation Supplement  
Safety Information  
Explanation of Safety Messages  
Important Safety Instructions  
Precautionary statements (“DANGER,” “WARNING,”  
and “CAUTION”), followed by specific instructions,  
are found in this manual and on machine decals. These  
precautions are intended for the personal safety of the  
operator, user, servicer, and those maintaining the  
machine.  
WARNING  
To reduce the risk of fire, electric shock,  
serious injury or death to persons when  
using your washer, follow these basic  
precautions:  
W023  
DANGER  
1. Read all instructions before using the washer.  
DANGER indicates the presence of a  
hazard that will cause severe personal  
injury, death, or substantial property  
damage if the danger is ignored.  
2. Refer to the GROUNDING INSTRUCTIONS in  
the INSTALLATION manual for the proper  
grounding of the washer.  
3. Do not wash textiles that have been previously  
cleaned in, washed in, soaked in, or spotted with  
gasoline, kerosene, waxes, cooking oils, dry-  
cleaning solvents, or other flammable or  
explosive substances as they give off vapors that  
could ignite or explode.  
WARNING  
WARNING indicates the presence of a  
hazard that can cause severe personal  
injury, death, or substantial property  
damage if the warning is ignored.  
4. Do not add gasoline, dry-cleaning solvents, or  
other flammable or explosive substances to the  
wash water. These substances give off vapors that  
could ignite or explode.  
5. Under certain conditions, hydrogen gas may be  
produced in a hot water system that has not been  
used for two weeks or more. HYDROGEN GAS  
IS EXPLOSIVE. If the hot water system has not  
been used for such a period, before using a  
washing machine or combination washer-dryer,  
turn on all hot water faucets and let the water  
flow from each for several minutes. This will  
release any accumulated hydrogen gas. The gas is  
flammable, do not smoke or use an open flame  
during this time.  
CAUTION  
CAUTION indicates the presence of a  
hazard that will or can cause minor  
personal injury or property damage if the  
caution is ignored.  
Additional precautionary statements (“IMPORTANT”  
and “NOTE”) are followed by specific instructions.  
IMPORTANT: The word “IMPORTANT” is used  
to inform the reader of specific procedures where  
minor machine damage will occur if the procedure  
is not followed.  
6. Do not allow children to play on or in the washer.  
Close supervision of children is necessary when  
the washer is used near children. This is a safety  
rule for all appliances.  
NOTE: The word “NOTE” is used to communicate  
installation, operation, maintenance or servicing  
information that is important but not hazard  
related.  
7. Before the washer is removed from service or  
discarded, remove the door to the washing  
compartment.  
8. Do not reach into the washer if the wash drum is  
moving.  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
     
Installation/Operation Supplement  
9. Do not install or store the washer where it will be  
exposed to water and/or weather.  
20. If the supply cord is damaged, it must be replaced  
by a special cord or assembly available from the  
manufacturer or its service agent.  
10. Do not tamper with the controls.  
21. Be sure water connections have a shut-off valve  
and that fill hose connections are tight. CLOSE  
the shut-off valves at the end of each wash day.  
11. Do not repair or replace any part of the washer, or  
attempt any servicing unless specifically  
recommended in the user-maintenance  
instructions or in published user-repair  
instructions that the user understands and has the  
skills to carry out.  
22. Loading door MUST BE CLOSED any time the  
washer is to fill, tumble or spin. DO NOT bypass  
the loading door switch by permitting the washer  
to operate with the loading door open.  
12. To reduce the risk of an electric shock or fire, DO  
NOT use an extension cord or an adapter to  
23. Always read and follow manufacturer’s  
instructions on packages of laundry and cleaning  
aids. Heed all warnings or precautions. To reduce  
the risk of poisoning or chemical burns, keep  
them out of the reach of children at all times  
(preferably in a locked cabinet).  
connect the washer to the electrical power source.  
13. Use washer only for its intended purpose,  
washing textiles.  
14. Never wash machine parts or automotive parts in  
the machine. This could result in serious damage  
to the basket.  
24. Always follow the fabric care instructions  
supplied by the textile manufacturer.  
15. ALWAYS disconnect the washer from electrical  
supply before attempting any service. Disconnect  
the power cord by grasping the plug, not the cord.  
25. Never operate the washer with any guards and/or  
panels removed.  
26. DO NOT operate the washer with missing or  
broken parts.  
16. Install the washer according to the  
INSTALLATION INSTRUCTIONS. All  
connections for water, drain, electrical power and  
grounding must comply with local codes and be  
made by licensed personnel when required.  
27. DO NOT bypass any safety devices.  
28. Failure to install, maintain, and/or operate this  
washer according to the manufacturer’s  
17. To reduce the risk of fire, textiles which have  
traces of any flammable substances such as  
vegetable oil, cooking oil, machine oil,  
instructions may result in conditions which can  
produce bodily injury and/or property damage.  
NOTE: The WARNINGS and IMPORTANT  
SAFETY INSTRUCTIONS appearing in this  
manual are not meant to cover all possible  
conditions and situations that may occur. Common  
sense, caution and care must be exercised when  
installing, maintaining, or operating the washer.  
flammable chemicals, thinner, etc., or anything  
containing wax or chemicals such as in mops and  
cleaning cloths, must not be put into the washer.  
These flammable substances may cause the  
fabric to catch on fire by itself.  
18. Do not use fabric softeners or products to  
eliminate static unless recommended by the  
manufacturer of the fabric softener or product.  
Any problems or conditions not understood should be  
reported to the dealer, distributor, service agent or the  
manufacturer.  
19. Keep washer in good condition. Bumping or  
dropping the washer can damage safety features.  
If this occurs, have washer checked by a qualified  
service person.  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Installation/Operation Supplement  
WARNING  
CAUTION  
This machine must be installed, adjusted,  
and serviced by qualified electrical  
Be careful around the open door,  
particularly when loading from a level  
below the door. Impact with door edges  
can cause personal injury.  
maintenance personnel familiar with the  
construction and operation of this type of  
machinery. They must also be familiar  
with the potential hazards involved.  
Failure to observe this warning may result  
in personal injury and/or equipment  
SW025  
WARNING  
damage, and may void the warranty.  
SW004  
Never touch internal or external steam  
pipes, connections, or components.  
These surfaces can be extremely hot and  
will cause severe burns. The steam must  
be turned off and the pipe, connections,  
and components allowed to cool before  
IMPORTANT: Ensure that the recommended  
clearances for inspection and maintenance  
are provided. Never allow the inspection and  
maintenance space to be blocked.  
the pipe can be touched.  
SW014  
WARNING  
Safety Decals  
Install the machine on a level floor of  
sufficient strength. Failure to do so may  
result in conditions which can produce  
serious injury, death and/or property  
Safety decals appear at crucial locations on the  
machine. Failure to maintain legible safety decals  
could result in injury to the operator or service  
technician.  
damage.  
W703  
To provide personal safety and keep the machine in  
proper working order, follow all maintenance and  
safety procedures presented in this manual. If  
questions regarding safety arise, contact the  
manufacturer immediately.  
Use manufacturer-authorized spare parts to avoid  
safety hazards.  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
 
Installation/Operation Supplement  
Operator Safety  
WARNING  
Do not bypass any safety devices in the machine.  
WARNING  
NEVER insert hands or objects into  
basket until it has completely stopped.  
Doing so could result in serious injury.  
Never operate the machine with a  
bypassed or disconnected balance  
system. Operating the machine with  
severe out-of-balance loads could result  
in personal injury and serious equipment  
SW012  
To ensure the safety of machine operators, the  
following maintenance checks must be performed  
daily:  
damage.  
SW039  
1. Prior to operating the machine, verify that all  
warning signs are present and legible. Missing or  
illegible signs must be replaced immediately.  
Make certain that spares are available.  
2. Check door interlock before starting operation of  
the machine:  
a.Attempt to start the machine with the door  
open. The machine should not start with the  
door open.  
b.Close the door without locking it and attempt to  
start the machine. The machine should not  
start with the door unlocked.  
c.Close and lock the door and start a cycle.  
Attempt to open the door while the cycle is in  
progress. The door should not open.  
If the door lock and interlock are not functioning  
properly, call a service technician.  
3. Do not attempt to operate the machine if any of  
the following conditions are present:  
a.The door does not remain securely locked  
during the entire cycle.  
b.Excessively high water level is evident.  
c.Machine is not connected to a properly  
grounded circuit.  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
 
Installation/Operation Supplement  
Specifications and Dimensions  
General Specifications  
18  
Model  
25  
35  
Overall Dimensions  
Overall width  
660 mm (26 in.)  
660 mm (26 in.) 783 mm (30.8 in.)  
Overall height  
1031 mm (40.6 in.) 1031 mm (40.6 in.) 1194 mm (47 in.)  
780 mm (30.7 in.) 870 mm (34.3 in.) 960 mm (37.8 in.)  
Overall depth  
Weight and Shipping Information  
Net weight  
236 kg (520 lb.)  
283 kg (624 lb.)  
241 kg (531 lb.)  
347 kg (765 lb.)  
Shipping weight  
290 kg (639.5 lb.) 467 kg (1030 lb.)  
3
3
3
3
3
3
Shipping volume  
0.8 m (22.5 ft )  
0.9 m (24.5 ft )  
1.3 m (34.7 ft )  
Wash Cylinder Information  
Cylinder diameter  
530 mm (20.9 in.) 530 mm (20.9 in.) 650 mm (25.6 in.)  
345 mm (13.6 in.) 440 mm (17.3 in.) 500 mm (19.7 in.)  
Cylinder depth  
3
3
3
Cylinder volume  
76 l (2.7 ft )  
97 l (3.43 ft )  
167 l (5.9 ft )  
Perforation size  
3 mm (0.1 in.)  
3 mm (0.1 in.)  
3 mm (0.1 in.)  
Door Opening Information  
Door opening size  
300 mm (11.8 in.) 300 mm (11.8 in.) 300 mm (11.8 in.)  
Height of door bottom above floor  
Water Consumption  
Average water consumption per cycle  
279 mm (11 in.)  
279 mm (11 in.) 395 mm (15.6 in.)  
HOT  
90 l (24 gal.)  
42 l (11 gal.)  
110 l (29 gal.)  
49 l (13 gal.)  
178 l (47 gal.)  
79 l (21 gal.)  
COLD  
Power Consumption  
Motor  
Average power used per cycle  
0.15 kW/hr  
1.5 kW/hr  
0.15 kW/hr  
2.25 kW/hr  
0.2 kW/hr  
Heating  
3.75 kW/hr  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation/Operation Supplement  
General Specifications  
18  
Model  
Drive Train Information  
Number of motors in drive train  
Drive motor power  
25  
35  
1
1
1
0.75 kW (1 hp)  
0.75 kW (1 hp)  
1.5 kW (2 hp)  
Cylinder Speeds  
Wash/reverse speed  
10-50 rpm  
82 rpm  
10-50 rpm  
82 rpm  
10-50 rpm  
74 rpm  
Distribution/drain speed  
Extract speed  
250-1000 rpm  
250-1000 rpm  
250-1000 rpm  
Centrifugal Force Data  
Wash/reverse centrifugal force  
Extract centrifugal force  
Balance Detection  
0.03-0.74 Gs  
19-296 Gs  
0.03-0.74 Gs  
19-296 Gs  
0.04-0.91 Gs  
23-363 Gs  
Vibration safety switch installed  
Direct Steam Heating (Optional)  
Steam inlet connection size  
Number of steam inlets  
Standard  
Standard  
Standard  
10 mm (0.38 in.)  
1
10 mm (0.38 in.)  
1
10 mm (0.38 in.)  
1
Steam required to raise  
bath temperature 10°C, kg (10°F, lb.)  
LOW  
0.83 kg (1.15 lb.)  
0.94 kg (1.3 lb.)  
1.15 kg (1.6 lb.)  
1.3 kg (1.8 lb.)  
1.6 kg (2.22 lb.)  
1.8 kg (2.52 lb.)  
HIGH  
Average steam use per cycle  
7.6 kg (0.48 bhp) 9.5 kg (0.60 bhp) 16.5 kg (1.05 bhp)  
Electrical Heating (Optional)  
Total electrical heating capacity  
Electrical heating elements  
9 kW  
3
9 kW  
3
18 kW  
6
Electrical heat element size  
3 kW  
3 kW  
3 kW  
LOW 10°C  
50°F  
Time required to raise bath temperature  
3 minutes  
6 minutes  
4 minutes  
7 minutes  
5 minutes  
8 minutes  
6 minutes  
9 minutes  
5 minutes  
8 minutes  
6 minutes  
9 minutes  
MED 10°C  
50°F  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
General Specifications  
Model  
Overall Dimensions  
Overall width  
55  
75  
100  
135  
165  
900 mm  
(35.4 in.)  
1060 mm  
(41.8 in.)  
1200 mm  
(47.3 in.)  
1200 mm  
(47.3 in.)  
1300 mm  
(51.8 in.)  
Overall height  
Overall depth  
1544 mm  
(60.8 in.)  
1560 mm  
(61.4 in.)  
1920 mm  
(75.6 in.)  
1920 mm  
(75.6 in.)  
2100 mm  
(82.7 in.)  
1016 mm  
(40 in.)  
1168 mm  
(46 in.)  
1330 mm  
(52.4 in.)  
1500 mm  
(59.1 in.)  
1620 mm  
(63.8 in.)  
Weight and Shipping Information  
Net weight  
570 kg  
865 kg  
1520 kg  
1645 kg  
2100 kg  
(1247 lb.)  
(1907 lb.)  
(3351 lb.)  
(3626 lb.)  
(4630 lb.)  
Shipping weight  
Shipping volume  
630 kg  
(1380 lb.)  
995 kg  
(2194 lb.)  
1697 kg  
(3741 lb.)  
1822 kg  
(4017 lb.)  
2319 kg  
(5113 lb.)  
3
3
3
3
3
1.5 m  
2.1 m  
3.3 m  
3.7 m  
4.4 m  
3
3
3
3
3
(54.9 ft )  
(74 ft )  
(115 ft )  
(131 ft )  
(162 ft )  
Wash Cylinder Information  
Cylinder diameter  
750 mm  
(29.5 in.)  
850 mm  
(33.5 in.)  
980 mm  
(38.6 in.)  
980 mm  
(38.6 in.)  
1095 mm  
(43.1 in.)  
Cylinder depth  
Cylinder volume  
Perforation size  
530 mm  
(20.9 in.)  
537 mm  
(21.1 in.)  
597 mm  
(23.5 in.)  
775 mm  
(30.5 in.)  
775 mm  
(30.5 in.)  
234 l  
305 l  
(10.76 ft )  
451 l  
(15.92 ft )  
585 l  
(20.66 ft )  
730 l  
3
3
3
3
3
(8.27 ft )  
(25.8 ft )  
3 mm  
3 mm  
3 mm  
3 mm  
3 mm  
(0.1 in.)  
(0.1 in.)  
(0.1 in.)  
(0.1 in.)  
(0.1 in.)  
Door Opening Information  
Door opening size  
395 mm  
395 mm  
500 mm  
500 mm  
622 mm  
(15.6 in.)  
(15.6 in.)  
(19.7 in.)  
(19.7 in.)  
(24.5 in.)  
Height of door bottom above floor  
559 mm  
(22 in.)  
559 mm  
(22 in.)  
648 mm  
(25.5 in.)  
648 mm  
(25.5 in.)  
710 mm  
(28 in.)  
Water Consumption  
Average water consumption  
per cycle  
HOT  
216 l  
(57 gal.)  
326 l  
(86 gal.)  
401 l  
(106 gal.)  
591 l  
(156 gal.)  
719 l  
(190 gal.)  
COLD  
98 l  
136 l  
178 l  
265 l  
322 l  
(26 gal.)  
(36 gal.)  
(47 gal.)  
(70 gal.)  
(85 gal.)  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
General Specifications  
Model  
55  
75  
100  
135  
165  
Power Consumption  
Motor  
Heat  
Average power used per cycle  
0.75 kW/hr  
3.75 kW/hr  
0.95 kW/hr  
4.5 kW/hr  
1.1 kW/hr  
1.3 kW/hr  
6.5 kW/hr  
1.6 kW/hr  
N/A  
5.22 kW/hr  
Drive Train Information  
Number of motors in drive train  
Drive motor power  
1
1
1
1
1
4 kW  
(5.4 hp)  
4 kW  
(5.4 hp)  
5.5 kW  
(7.4 hp)  
7.5 kW  
(10 hp)  
11.5 kW  
(15 hp)  
Cylinder Speeds  
Wash/reverse speed  
Distribution/drain speed  
Extract speed  
10-50  
10-50  
10-50  
10-50  
10-50  
69 rpm  
65 rpm  
61 rpm  
61 rpm  
100 rpm  
250-1000  
rpm  
250-1000  
rpm  
250-800  
rpm  
250-800  
rpm  
250-750  
rpm  
Centrifugal Force Data  
Wash/reverse centrifugal force  
Extract centrifugal force  
0.04-1.05 Gs 0.05-1.19 Gs 0.06-1.37 Gs 0.06-1.37 Gs 0.06-1.52 Gs  
26-418 Gs  
30-475 Gs  
34-350 Gs  
34-350 Gs  
34-344 Gs  
Balance Detection  
Vibration safety switch installed  
Standard  
Standard  
Standard  
Standard  
Standard  
Direct Steam Heating (Optional)  
Steam inlet connection size  
10 mm  
10 mm  
10 mm  
10 mm  
19 mm  
(0.38 in.)  
(0.38 in.)  
(0.38 in.)  
(0.38 in.)  
(0.75 in.)  
Number of steam inlets  
1
1
1
1
1
Steam required to raise bath LOW  
2.5 kg (3.4 lb.) 3.4 kg (4.6 lb.) 4.5 kg (6.2 lb.) 6.1 kg (8.4 lb.) 7.8 kg (10.3 lb.)  
2.8 kg (4 lb.) 3.8 kg (5.5 lb.) 5 kg (6.9 lb.) 6.8 kg (9.3 lb.) 8.4 kg (11.4 lb.)  
temperature 10°C, kg  
MED  
(10°F, lb.)  
Average steam use per cycle  
23.4 kg  
30.4 kg  
45 kg  
57 kg  
70 kg  
(1.49 bhp)  
(1.94 bhp)  
(2.87 bhp)  
(3.63 bhp)  
(4.4 bhp)  
Electrical Heating (Optional)  
Total electrical heating capacity  
Electrical heating elements  
18 kW  
6
18 kW  
6
27 kW  
9
27 kW  
9
N/A  
N/A  
N/A  
Electrical heat element size  
3 kW  
3 kW  
3 kW  
3 kW  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
General Specifications  
Model  
55  
75  
100  
135  
165  
LO 10°  
Time required to raise bath  
temperature  
6 minutes  
6 minutes  
11 minutes  
13 minutes  
N/A  
W
C
50°  
F
8 minutes  
5 minutes  
10 minutes  
6 minutes  
5 minutes  
5 minutes  
11 minutes  
12 minutes  
12 minutes  
13 minutes  
14 minutes  
14 minutes  
N/A  
N/A  
N/A  
ME 10°  
D
C
50°  
F
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
18: 787 mm (31 in.)  
25: 884 mm (34.8 in.)  
5
1031 mm  
(40.6 in.)  
1011 mm  
(39.8 in.)  
518 mm  
(20.4 in.)  
279 mm  
(11 in.)  
486 mm  
(19.13 in.)  
18: 560 mm  
(22.05 in.)  
660 mm  
(26 in.)  
25: 660 mm  
(25.98 in.)  
CFD530N  
CFS464N  
229 mm  
(9 in.)  
152 mm  
(6 in.)  
8
140 mm  
(5.5 in.)  
74 mm  
(2.9 in.)  
1
2
3
7
6
4
158 mm  
(6.2 in.)  
780 mm  
(30.7 in.)  
881 mm  
(34.7 in.)  
742 mm  
(29.2 in.)  
9
41 mm  
(1.6 in.)  
389 mm  
(15.3 in.)  
51 mm  
(2 in.)  
10  
181 mm  
(7.1 in.)  
CFS465N  
TH  
18 AND 25 POUND CAPACITY MODELS WITH U IN THE 8 POSITION (E.G. *X18PVXU6)  
1
2
3
4
5
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
6
7
8
9
10  
External Liquid Supply Inlets  
Electrical Power Input  
External Supply Signal Input  
Drain Outlet  
Steam Connection Input (Optional)  
Figure 1  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
8.66 in.  
(220 mm)  
11  
1.3 in.  
(33 mm)  
2.56 in.  
(65 mm)  
1.3 in.  
(33 mm)  
2.56 in.  
(65 mm)  
1.18 in.  
(30 mm)  
1.18 in.  
(30 mm)  
18: 23.23 in. (590 mm)  
25: 27.16 in. (690 mm)  
20.87 in. (530 mm)  
25.98 in. (660 mm)  
18: 26.38 in. (670 mm)  
25: 30.31 in. (770 mm)  
CFD521N  
8.9 in. (226 mm)  
5.94 in. (151 mm)  
2.95 in. (75 mm)  
18: 28.62 in. (727 mm)  
25: 32.56 in. (827 mm)  
2.72 in.  
(69 mm)  
1
3
2
4
CFD522N  
5
10  
9
6
7
4.3 in.  
(109 mm)  
8
7.09 in. (180 mm)  
25.98 in. (660 mm)  
1.73 in.  
(44 mm)  
CFD528N  
TH  
18 AND 25 POUND CAPACITY MODELS WITH A OR M IN THE 8 POSITION (E.G. *X18PVXM6)  
1
2
3
4
5
6
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
External Liquid Supply Inlets  
Hot Water Inlet (Required)  
Ventilation Tub  
7
8
9
10  
11  
Electrical Power Input  
Drain Outlet  
Steam Connection Input (Optional)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
Main Switch  
Figure 2  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
5
960 mm  
(37.8 in.)  
1194 mm  
(47 in.)  
1176 mm  
(46.3 in.)  
620 mm  
(24.4 in.)  
394 mm  
(15.5 in.)  
639 mm  
(25.16 in.)  
770 mm  
782 mm  
(30.8 in.)  
(30.31 in.)  
CFD531N  
CFS467N  
328 mm  
(12.9 in.)  
264 mm  
(10.4 in.)  
89 mm  
(3.5 in.)  
8
2
3
155 mm  
(6.1 in.)  
4
1
6
7
10  
1041 mm  
(41 in.)  
934 mm  
(36.75 in.)  
1001 mm  
(39.4 in.)  
965 mm  
(38 in.)  
889 mm  
(35 in.)  
9
508 mm  
(20 in.)  
203 mm  
(8 in.)  
112 mm  
(4.4 in.)  
CFS468N  
TH  
35 POUND CAPACITY MODELS WITH U IN THE 8 POSITION (E.G. *X35PVXU6)  
1
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
6
7
8
9
10  
External Liquid Supply Inlets  
Electrical Supply Signal Input  
External Supply Signal Input  
Drain Outlet  
2
3
4
5
Steam Connection Input (Optional)  
Figure 3  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
8.66 in.  
(220 mm)  
11  
3.47 in.  
(88 mm)  
1.34 in.  
(34 mm)  
1.34 in.  
(34 mm)  
1.44 in.  
(36.5 mm)  
1.44 in.  
(36.5 mm)  
25.51 in. (648 mm)  
30.71 in.(780 mm)  
2.6 in.  
(66 mm)  
30.12 in. (765 mm)  
33.86 in. (860 mm)  
3.23 in.  
82 mm)  
2.6 in.  
CFD524N  
(66 mm)  
36.06 in. (916 mm)  
13.05 in. (332 mm)  
CFD525N  
10.49 in. (267 mm)  
7.93 in. (202 mm)  
4.13 in. (105 mm)  
1
3
2
10  
4
9
5
8
6
4.3 in.  
(109.2 mm)  
1.38 in (35 mm)  
7
7.87 in.  
(200 mm)  
2.36 in.  
(60 mm)  
CFD529N  
TH  
35 POUND CAPACITY MODELS WITH A OR M IN THE 8 POSITION (E.G. *X35PVXM6)  
1
2
3
4
5
6
Fill and Supply Ventilation  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Main Switch  
Ventilation Tub  
Electrical Power Input  
7
8
9
10  
11  
Drain Outlet  
Steam Connection Input (Optional)  
External Liquid Supply Inlets  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
Figure 4  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
5
1016 mm  
(40 in.)  
1544 mm  
(60.8 in.)  
1499 mm  
(59 in.)  
859 mm  
(33.8 in.)  
559 mm  
(22 in.)  
740 mm  
(29.13 in.)  
102 mm  
(4 in.)  
830 mm  
(32.68 in.)  
900 mm  
(35.43 in.)  
CFS470N  
CFD509N  
91 mm  
(13.6 in.)  
254 mm  
(10 in.)  
252 mm  
(9.9 in.)  
2
158 mm  
(6.2 in.)  
3
4
99 mm  
(3.9 in.)  
1
6
191 mm  
(7.5 in.)  
1389 mm  
(54.7 in.)  
11  
7
8
1283 mm  
(50.5 in.)  
36 mm  
(1.4 in.)  
721 mm  
(28.4 in.)  
165 mm  
(6.5 in.)  
165 mm  
(6.5 in.)  
9
10  
104 mm  
(4.1 in.)  
CFS471N  
104 mm  
(4.1 in.)  
55 MODEL  
1
2
3
4
5
6
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
External Liquid Supply Inlets  
7
8
9
10  
11  
Electrical Power Input  
External Supply Signal Input  
Drain Outlet  
Reuse Drain Outlet (Optional)  
Steam Connection Input (Optional)  
Figure 5  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
5
1168 mm  
(46 in.)  
1575 mm  
(62 in.)  
853 mm  
(33.6 in.)  
1532 mm  
(60.3 in.)  
559 mm  
(22 in.)  
102 mm  
(4 in.)  
870 mm  
(34.25 in.)  
1060 mm  
(41.73 in.)  
CFD510N  
488 mm  
(19.2 in.)  
960 mm  
(37.8 in.)  
CFS473N  
366 mm  
(14.4 in.)  
246 mm  
(9.7 in.)  
229 mm  
(9 in.)  
3
2
4
94 mm  
(3.7 in.)  
1
175 mm  
(6.9 in.)  
6
1407 mm  
(55.4 in.)  
7
8
11  
1315 mm  
(51.75 in.)  
43 mm  
(1.7 in.)  
170 mm  
(6.7 in.)  
582 mm  
(22.9 in.)  
10  
9
104 mm  
(4.1 in.)  
CFS474N  
104 mm  
(4.1 in.)  
75 MODEL  
1
2
3
4
5
6
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
External Liquid Supply Inlets  
7
8
9
10  
11  
Electrical Power Input  
External Supply Signal Input  
Drain Outlet  
Reuse Drain Outlet (Optional)  
Steam Connection Input (Optional)  
Figure 6  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
100: 1331 mm (52.4 in.)  
135: 1506 mm (59.3 in.)  
6
1951 mm  
(76.8 in.)  
960 mm  
(37.8 in.)  
648 mm  
(25.5 in.)  
102 mm  
(4 in.)  
1040 mm  
(40.94 in.)  
1200 mm  
(47.24 in.)  
CFD511N  
100: 1010 mm  
(39.76 in.)  
305 mm  
(12 in.)  
2362 mm  
(9.3 in.)  
CFS476N  
135: 1185 mm  
(46.65 in)  
175 mm  
(6.9 in.)  
89 mm  
(3.5 in.)  
114 mm  
(4.5 in.)  
104 mm  
(4.1 in.)  
165 mm  
(6.5 in.)  
170 mm  
(6.7 in.)  
51 mm  
(2 in.)  
2
3
5
249 mm  
(9.8 in.)  
1
221 mm  
(8.7 in.)  
4
9
13  
8
7
12  
1575 mm  
(62 in.)  
10  
216 mm  
(8.5 in.)  
696 mm  
(27.4 in.)  
216 mm  
(8.5 in.)  
185 mm  
(7.3 in.)  
CFS477N  
11  
100 AND 135 MODELS  
1
2
3
4
5
6
7
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
External Liquid Supply Inlets  
8
9
10  
11  
12  
13  
Electrical Power Input  
External Supply Signal Input  
Drain Outlet  
Reuse Drain Outlet (Optional)  
Steam Connection Input (Optional)  
Service Power Disconnect  
Figure 7  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
1620 mm  
(63.8 in.)  
6
2100 mm  
(82.7 in.)  
1020 mm  
(40.2 in.)  
641 mm  
(25.25 in.)  
102 mm  
(4 in.)  
1140 mm  
(44.9 in.)  
1300 mm  
(51.2 in.)  
CFD511N  
360 mm  
(14.25 in.)  
273 mm  
(10.75 in.)  
1185 mm  
(46.7 in.)  
CFD15N  
198 mm  
(7.8 in.)  
122 mm  
(4.8 in.)  
114 mm  
(4.5 in.)  
114 mm  
(4.5 in.)  
51 mm  
(2 in.)  
197 mm  
(7.75 in.)  
2
172 mm  
(6.75 in.)  
3
5
260 mm  
(10.24 in.)  
1
221 mm  
(8.7 in.)  
4
9
7
13  
12  
1854 mm  
(73 in.)  
8
10  
254 mm  
(10 in.)  
696 mm  
(27.4 in.)  
254 mm  
(10 in.)  
236 mm  
(9.3 in.)  
CFS477N  
11  
165 MODEL  
1
2
3
4
5
6
7
Fill and Supply Ventilation  
Cold Water Inlet (Required)  
Hot Water Inlet (Required)  
Cold Water Inlet (Required)  
Cold Water Inlet (Required)  
Flushing Supply Dispenser  
External Liquid Supply Inlets  
8
9
10  
11  
12  
13  
Electrical Power Input  
External Supply Signal Input  
Drain Outlet  
Reuse Drain Outlet (Optional)  
Steam Connection Input (Optional)  
Service Power Disconnect  
Figure 8  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Installation  
Dimensional Clearances  
Table 1 shows recommended minimum clearances on  
all sides of the washer-extractor.  
Recommended Minimum Clearances  
Model  
18  
25  
35  
600 mm 600 mm 600 mm 600 mm 600 mm 600 mm  
(24 in.) (24 in.) (24 in.) (24 in.) (24 in.) (24 in.)  
150 mm 150 mm 150 mm 150 mm 150 mm 150 mm  
55  
75  
100  
135  
165  
Minimum rear clearance  
600 mm  
(24 in.)  
600 mm  
(24 in.)  
Minimum clearance between 150 mm  
machine and wall (6 in.)  
150 mm  
(6 in.)  
(6 in.)  
(6 in.)  
(6 in.)  
(6 in.)  
(6 in.)  
(6 in.)  
Minimum clearance between 25.4 mm 25.4 mm 25.4 mm  
30 mm  
30 mm  
30 mm  
30 mm  
30 mm  
machines (side)  
(1 in.)  
(1 in.)  
(1 in.)  
(1.2 in.)  
(1.2 in.)  
(1.2 in.)  
(1.2 in.)  
(1.2 in.)  
Minimum front clearance  
(door swing)  
419 mm  
419 mm  
419 mm 533 mm 533 mm 660 mm 660 mm 660 mm  
(16.5 in.) (16.5 in.) (16.5 in.) (21 in.)  
(21 in.)  
(26 in.)  
(26 in.)  
(26 in.)  
Table 1  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installation/Operation Supplement  
The washer-extractor must be placed on a smooth level  
surface so that the entire base of the machine is  
supported and rests on the mounting surface.  
Machine Foundation  
Thoroughness of detail must be stressed with all  
foundation work to ensure a stable unit installation,  
eliminating possibilities of excessive vibration during  
extract.  
The standard installation does not require anchoring  
unless mandated by state or local codes.  
Static and dynamic loads on the floor or foundation are  
shown in Table 2.  
CAUTION  
Table 2 can be used as a reference when designing  
floors and foundations.  
Ensure that the machine is installed on a  
level floor of sufficient strength and that  
the recommended clearances for  
inspection and maintenance are provided.  
Never allow the inspection and  
maintenance space to be blocked.  
W488  
Floor Load Data  
Model  
18  
25  
35  
55  
75  
100  
135  
165  
Staticfloor  
load  
2.51 kN  
(546 lb.)  
2.63 kN  
(592 lb.)  
4.38 kN  
(983 lb.)  
6.97 kN  
(1566 lb.)  
10.3 kN  
(2310 lb.)  
16.4 kN  
(3682 lb.)  
19.1 kN  
(4282 lb.)  
24.49 kN  
(5509 lb.)  
2
2
2
2
2
2
2
2
Static  
pressure  
6.79 kN-m 5.17 kN-m 6.53 kN-m 8.33 kN-m 8.97 kN-m 11.5 kN-m 12.5 kN-m 14.84 kN-m  
2
2
2
2
2
2
2
2
(137 lbs-ft ) (109 lbs-ft ) (137 lbs-ft ) (175 lbs-ft ) (188 lbs-ft ) (240 lbs-ft ) (261 lbs-ft ) (310 lbs-ft )  
Dynamic  
floor load  
0.7 kN  
(157 lb.)  
0.75 kN  
(169 lb.)  
1.2 kN  
(270 lb.)  
1.7 kN  
(382 lb.)  
2.0 kN  
(450 lb.)  
2.96 kN  
(665 lb.)  
3.75 kN  
(883 lb.)  
4.86 kN  
(1093 lb.)  
Maximum  
dynamic  
load  
0.7 kN  
(157 lb.)  
0.75 kN  
(169 lb.)  
1.2 kN  
(270 lb.)  
1.7 kN  
(382 lb.)  
2.0 kN  
(450 lb.)  
2.96 kN  
(665 lb.)  
3.75 kN  
(883 lb.)  
5.78 kN  
(1301 lb.)  
2
2
2
2
2
2
2
2
Dynamic 1.89 kN-m 1.47 kN-m 1.79 kN-m 2.03 kN-m 7.75 kN-m 2.07 kN-m 2.46 kN-m 3.05 kN-m  
pressure  
2
2
2
2
2
2
2
2
(39.4 lbs-ft ) (31.1 lbs-ft ) (37.6 lbs-ft ) (42.7 lbs-ft ) (36.6 lbs-ft ) (43.3 lbs-ft ) (53.8 lbs-ft ) (63.7 lbs-ft )  
Table 2  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation/Operation Supplement  
Mechanical Installation  
782 mm  
(30.8 in.)  
45 mm  
Frame Dimensions and Mounting Bolt  
Location for 18, 25, 35, 55, 75, 100, 135  
and 165 Models  
(1.77 in.)  
860 mm  
(33.85 in.)  
660 mm  
770 mm  
(30.31 in.)  
55 mm  
(26 in.)  
(2.17 in.)  
670 mm  
(26.38 in.)  
560 mm  
(22.05 in.)  
45 mm  
(1.77 in.)  
639 mm  
(25.16 in.)  
71 mm  
(2.78 in.)  
71 mm  
(2.78 in.)  
35 MODEL  
CFS480N  
55 mm  
(2.17 in.)  
486 mm  
(19.13 in.)  
Figure 11  
87 mm  
(3.43 in.)  
87 mm  
(3.43 in.)  
898 mm  
(35.35 in.)  
18 MODEL  
50 mm  
(1.97 in.)  
CFS479N  
Figure 9  
660 mm  
(26 in.)  
55 mm  
(2.17 in.)  
830 mm  
(32.68 in.)  
930 mm  
(36.61 in.)  
660 mm  
(25.98 in.)  
770 mm  
(30.31 in.)  
50 mm  
(1.97 in.)  
740 mm  
(29.13 in.)  
80 mm  
(3.15 in.)  
80 mm  
(3.15 in.)  
55 MODEL  
55 mm  
(2.17 in.)  
486 mm  
(19.13 in.)  
CFS481N  
87 mm  
(3.43 in.)  
87 mm  
(3.43 in.)  
Figure 12  
25 MODEL  
CFS478N  
Figure 10  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation/Operation Supplement  
1200 mm  
(47.24 in.)  
1060 mm  
(41.73 in.)  
42,5 mm  
(1.67 in.)  
60 mm  
(2.36 in.)  
1270 mm  
(50 in.)  
960 mm  
(37.8 in.)  
1080 mm  
(42.52 in.)  
1185 mm  
(46.65 in.)  
42,5 mm  
(1.67 in.)  
60 mm  
(2.36 in.)  
870 mm  
(34.25 in.)  
1040 mm  
(40.94 in.)  
95 mm  
(3.74 in.)  
95 mm  
(3.74 in.)  
80 mm  
(3.15 in.)  
80 mm  
(3.15 in.)  
135 MODEL  
75 MODEL  
CFS484N  
CFS483N  
Figure 15  
Figure 13  
1300 mm  
(51.2 in.)  
1200 mm  
(47.24 in.)  
40 mm  
(1.57 in.)  
33 mm  
(1.3 in.)  
1090 mm  
(42.91 in.)  
1010 mm  
(39.76 in.)  
1251 mm  
(49.25 in.)  
1185 mm  
(46.7 in.)  
40 mm  
(1.57 in.)  
33 mm  
(1.3 in.)  
1040 mm  
(40.94 in.)  
1140 mm  
(44.9 in.)  
80 mm  
80 mm  
(3.15 in.)  
80 mm  
(3.15 in.)  
80 mm  
(3.15 in.)  
(3.15 in.)  
165 MODEL  
100 MODEL  
CFS482N  
CFS484N  
Figure 14  
Figure 16  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
4. To level machine, fill the spaces between the  
machine base and floor with machinery grout.  
Grout completely under all frame members.  
Remove front and rear panels to gain access to all  
frame members. Force grout under the machine  
base until all voids are filled.  
Mounting Bolt Installation  
(If Required)  
1
2
5. Remove the spacers carefully, allowing the  
machine to settle into the wet grout.  
3
6. Position washers and locknuts on machinery  
anchor bolts and finger-tighten to machine base.  
7. After the grout is completely dry, tighten the  
locknuts by even increments – one after the  
other – until all are tightened evenly and the  
machine is fastened securely to the floor.  
152 mm  
(6 in.)  
8. Remove the four red transport brackets which  
secure the moving components of the machine  
during shipping. Refer to Installation manual for  
typical transport bracket locations.  
4
CFS485N  
1
2
3
4
Base Frame  
Bolt  
Washer  
Anchor Bolt/Plug  
Figure 17  
After the concrete has cured and the anchors are  
installed, proceed as follows:  
1. Place the washer-extractor adjacent to the  
foundation. Do not attempt to move it by pushing  
on the sides. Always insert a pry bar or other  
device under the bottom of the frame of the  
washer-extractor to move it.  
2. Place the washer-extractor carefully over the  
anchors.  
3. Put bolts through the machine in the anchors and  
fasten them. (For the 18-25 and 35 models, the  
diameter of the bolt must be minimum 1/2-13 or  
12 mm; for the 55-75-100-135-165 models, the  
diameter of the bolt must be minimum 5/8-11 or  
16 mm.)  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
 
Installation/Operation Supplement  
Electrical Specifications  
Electrical Specifications  
Standard  
Voltage Designation  
Electric Heat  
18  
25  
N
P
440-480  
380-415  
200-240  
200-240  
440-480  
380-415  
200-240  
200-240  
440-480  
380-415  
200-240  
200-240  
440-480  
380-415  
200-240  
200-240  
440-480  
380-415  
200-240  
440-480  
380-415  
200-240  
440-480  
380-415  
200-240  
440-480  
380-415  
200-240  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
50/60  
3
3
3+PE  
3+N+PE  
3+PE  
6
15  
14/2.5  
20  
17  
28  
25  
10/6.0  
12/4.0  
10/6.0  
Not available  
20  
Q
X
N
P
3
Not available  
30  
1/3  
3
2/3+PE  
3+PE  
6
6
15  
14/2.5  
14/2.5  
Not available  
15  
21  
18  
29  
25  
10/6.0  
12/4.0  
10/6.0  
3
3+N+PE  
3+PE  
Not available  
20  
Q
X
N
P
3
Not available  
30  
1/3  
3
2/3+PE  
3+PE  
6
15  
14/2.5  
14/2.5  
Not available  
12  
15  
41  
36  
58  
50  
8/10.0  
8/10.0  
6/16.0  
3
3+N+PE  
3+PE  
Not available  
40  
35  
55  
Q
X
N
P
3
Not available  
60  
1/3  
3
2/3+PE  
3+PE  
12  
12  
15  
14/2.5  
14/2.5  
Not available  
15  
41  
36  
58  
50  
8/10.0  
8/10.0  
6/16.0  
3
3+N+PE  
3+PE  
Not available  
40  
Q
X
N
P
3
Not available  
60  
1/3  
3
2/3+PE  
3+PE  
12  
12  
12  
12  
17  
17  
17  
17  
17  
17  
20  
20  
25  
15  
15  
15  
20  
20  
20  
25  
25  
25  
30  
25  
25  
40  
14/2.5  
14/2.5  
14/2.5  
12/4.0  
12/4.0  
12/4.0  
10/6.0  
10/6.0  
10/6.0  
10/6.0  
10/6.0  
10/6.0  
8/10.0  
Not available  
41  
36  
58  
62  
55  
88  
62  
55  
88  
50  
8/10.0  
8/10.0  
6/16.0  
4/25.0  
6/16.0  
3/35.0  
4/25.0  
6/16.0  
3/35.0  
75  
3
3+N+PE  
3+PE  
40  
Q
N
P
3
60  
3
3+PE  
70  
100  
135  
165  
3
3+N+PE  
3+PE  
60  
Q
N
P
3
90  
70  
3
3+PE  
3
3+N+PE  
3+PE  
60  
Q
N
P
3
90  
3
3+PE  
Not available  
Not available  
Not available  
3
3+N+PE  
3+PE  
Q
3
Table 3  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation/Operation Supplement  
Operation  
Control Identification  
3
2
5
1
4
1
2
3
Keypad  
Display  
Emergency Stop Button  
4
5
Key Switch  
Serial Port  
Figure 18  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation/Operation Supplement  
For models: 100PV-165PV  
Load the Machine  
SX100PV  
SX135PV  
SX165PV  
UX100PV  
UX135PV  
UX165PV  
For models: 18PV-55PV  
SX18PV  
SX35PV  
SX75PV  
SX25PV  
SX55PV  
UX18PV  
UX35PV  
UX75PV  
UX25PV  
UX55PV  
1. Push on the doorlock system to open the door.  
2. Load the drum to the specified capacity.  
1. Pull the door handle towards you to open the  
door.  
3. Close the door by pushing the door handle  
towards the machine.  
Some models may have a door handle with a button  
that must be pressed.  
2. Load the drum to the specified capacity.  
3. Close the door by pushing the door handle  
towards the machine.  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
 
Installation/Operation Supplement  
Disposal of Unit  
This appliance is marked according to the European  
directive 2002/96/EC on Waste Electrical and  
Electronic Equipment (WEEE).  
This symbol on the product or on its packaging  
indicates that this product shall not be treated as  
household waste. Refer to Figure 19. Instead it shall be  
handed over to the applicable collection point for the  
recycling of electrical and electronic equipment.  
Ensuring this product is disposed of correctly will help  
prevent potential negative consequences for the  
environment and human health which could otherwise  
be caused by inappropriate waste handling of this  
product. The recycling of materials will help to  
conserve natural resources. For more detailed  
information about recycling of this product, please  
contact the local city office, household waste disposal  
service, or the source from which the product was  
purchased.  
MIX1N  
Figure 19  
9001014  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
   

3Com Network Card 2940 2941 User Manual
ADIC Server DAS V310E User Manual
AEG Oven BP5013001M User Manual
Agilent Technologies Thermometer FS2343 User Manual
Air King Vacuum Cleaner CVS 22E User Manual
Allied Air Enterprises Heat Pump 4HP16LT User Manual
Alpha ToolComHK Limited Grinder 225 User Manual
American Audio Thermometer ELMC 1 User Manual
AOC Flat Panel Television A17UX231 User Manual
Atlona Car Satellite TV System AT HDWP IR UK User Manual