Albatron Technology Computer Accessories KI51PV 754 User Manual |
KI51PV-754
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form
or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written permission of the company. Brands and product names are trademarks
or registered trademarks of their respective companies.
The vendor makes no representations or warranties with respect to the contents herein and
especially disclaim any implied warranties of merchantability or fitness for any purpose. Further
the vendor reserves the right to revise this publication and to make changes to the contents
herein without obligation to notify any party beforehand. Duplication of this publication, in part or
in whole, is not allowed without first obtaining the vendor’s approval in writing.
Trademark
All the trademarks or brands in this document are registered by their respective owner.
Disclaimer
We make no warranty of any kind with regard to the content of this user’s manual. The content
is subject to change without notice and we will not be responsible for any mistakes found in this
user’s manual. All the brand and product names are trademarks of their respective companies.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense. However, there is no guarantee that
interference will not occur in a particular installation.
CE Mark
The device is in accordance with 89/336 ECC-ENC Directive.
Ver: EG101
Download from Www.Somanuals.com. All Manuals Search And Download.
Things You Should Know
0
The images and pictures in this manual are for reference only and may vary from the
product you received depending on specific hardware models, third party components
and software versions.
0
This mainboard contains very delicate IC chips. Always use a grounded wrist strap
when working with the system.
0
0
Do not touch any IC chip, lead, connector or other components.
Always unplug the AC power when you install or remove any device on the mainboard
or when confuguring pins and switches.
Packing List
KI51PV-754 mainboard
I/O Bracket
IDE Cable
SATA Cable
Mainboard Setup Driver & User’s Manual CD
Mainboard Quick Installation Guide
Symbols
The following list explains the convention for symbols that will be used throughout this
manual:
Attention- Important Information
Follow the procedures below…
Troubleshooting Tips
Refer to other sections in this manual…
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CHAPTER 1. GETTING STARTED ....................................................1
INTRODUCTION.......................................................................................................1
SPECIFICATION .......................................................................................................2
CONFIGURATION ....................................................................................................5
Layout of KI51PV-754 (Right Side)................................................................5
Layout of KI51PV-754 (Back Side) ................................................................6
HARDWARE INSTALLATION ...................................................................................7
CPU Processor Installation..............................................................................7
Memory Installation: DIMM1.........................................................................8
Back Panel Configuration................................................................................9
Connectors..................................................................................................... 11
Front Panel Headers: SW/LED, SPEAKER..................................................12
Headers & Jumpers........................................................................................13
Audio Configuration......................................................................................17
Slots...............................................................................................................18
Power Supply Attachments............................................................................19
CHAPTER 2. BIOS SETUP ........................................................... 20
INTRODUCTION.....................................................................................................20
KEY FUNCTION.....................................................................................................20
MAIN MENU .........................................................................................................21
ADVANCED BIOS FEATURES..............................................................................23
INTEGRATED PERIPHERALS ................................................................................28
POWER MANAGEMENT........................................................................................32
HARDWARE MONITOR .........................................................................................34
LOAD DEFAULTS..................................................................................................34
CHAPTER 3: SOFTWARE SETUP................................................... 36
SOFTWARE LIST ...................................................................................................36
SOFTWARE INSTALLATION...................................................................................36
CHAPTER 4: TROUBLESHOOTING................................................. 38
APPENDIX I: SUPER 5.1 CHANNEL AUDIO EFFECT SETUP....................................41
APPENDIX II: RAID SETUP...................................................................................42
APPENDIX III: ABS (ALBATRON BIOS SECURITY) CARD SETUP ........................50
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
Chapter 1. Getting Started
Introduction
Congratulations on choosing the KI51PV-754 Mainboard. It is based on the nVIDIA® nForce4
C51PV Northbridge chipset and the nVIDIA® nForce4 MCP51 Southbridge chipset; with
possessing integrated graphics feature. The mainboard supports the AMD AthlonTM 64/
SempronTM processor (The power consumption for the aforementioned processors must be
rated at 65W or less.) socket 754 with FSB (Front Side Bus) frequencies of 800 MHz (1600
MT/s).
The KI51PV-754 provides one DIMM (Dual In-Line Memory Modules) socket. It allows you
installing 184-pin, non-ECC and unbuffered DDR400 (PC3200)/ DDR333 (2700) SDRAM which
supports a total memory capacity of 1GB.
The mainboard provides one PCI slot for use with a graphics card or expansion cards which the
interfaces are compatible.
The KI51PV-754 provides one floppy disk drive connector that can be used with 360KB/
720KB/1.2MB/1.44MB/2.88MB drives. It also has two IDE connectors for hard drives supporting
Ultra ATA 66/100/133. In addition, the onboard Serial ATA II comes with four SATA II
connectors, which each interface can provide up to3 Gbps transfer rate and also support RAID
0/ 1/ 0+1/ JBOD/ 5 mode (See Appendix II).
Moreover, the KI51PV-754 provides onboard I/O facilities such as one VGA connector (=D-Sub
connector), one DVI connector, and a maximum of eight USB 2.0/ 1.1 ports that can be set.
Four headers are also available on this mainboard for a TV OUT connector, a printer connector,
and two COM connectors to be set externally with cables and used additionally.
The onboard AC’ 97 audio codec supports high quality 6-channel audio play (Super 5.1
Channel Audio Effect) (See Appendix I) and supports the Sony/Philips Digital Interfaces
(SPDIF) specifications (Optional).
This mainboard also comes with one onboard 10/100 Mbps and the other built-in 1 Gbps
Ethernet LAN chips. There are two LAN ports on the back panel of your computer case that you
can directly plug into an Internet cable.
In addition, this mainboard supports the ABS (Albatron BIOS Security) card (Optional), which is
a small circuit board inserted onto the mainboard providing full backup BIOS functionality in
case of BIOS failure or damage during the BIOS flash (See Appendix III).
All the information (including hardware installation and software installation) in this manual are
for reference only. The contents in this manual may be updated without notice. The company
will not assume any responsibility for any errors or mistakes within.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
Specification
CPU:
z
z
Supports Socket 754
Supports AMD AthlonTM 64/ SempronTM Processor (The power consumption for the
aforementioned processors must be rated at 65W or less.)
z
z
Supports Hyper-TransportTM Link Technology
Supports 800 MHz (1600 MT/s) FSB (Front Side Bus) Frequencies
Chipset:
z
Northbridge Chipset – nVIDIA® nForce4 C51PV ( nVIDIA® GeForceTM 6150)
- Integrated nVIDIA® Pure VideoTM Technology
- Supports TV Encoder
- Supports 475 MHz Graphic Clock
- Supports MPEG-2 (DVD)/ WMV9 (HD-Video) Playback
- Supports Video Scaling
z
z
z
z
z
Southbridge Chipset – nVIDIA® nForce4 MCP51 ( nVIDIA® nForce 430)
I/O Controller – Winbond® W83627HF-AW
AC’ 97 Aduio Codec – Realtek® ALC655
Gbit LAN Controller – Marvell® 88E8056
10/100 Mbps LAN PHY – Marvell® 88E8036
Memory:
z
One DIMM socket with Dual Channel Technology supported, and also support a total
memory capacity of 1GB
z
Supports to use 184-pin, non-ECC & unbuffered DDR400 (PC3200)/ DDR333
(PC2700) SDRAM
Slots:
z
One PCI slot for expansion card
FDC Connector:
z
z
Supports one connector for two floppy disk drives
Supports 360KB/720KB/1.2MB/1.44MB/2.88MB
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
IDE Connector:
z
z
z
Two IDE connectors, support up to four IDE devices can be set
Supports Ultra ATA 66/100/133
Supports high capacity hard disk drives
Serial ATA II Connector:
z
z
z
Four SATA II connectors, support up to four SATA II HDDs can be set
Supports SATA 2.0 specification and provides 3 Gbps transfer rate
Supports RAID 0/1/ 0+1/ JBOD/ 5 mode
Onboard I/O facilities:
z
z
z
z
One PS/2 mouse port and one PS/2 keyboard port
One DVI connector
One VGA connector (=D-Sub connector)
One TV Out header, one IrDA header, one Printer header, one SPDIF header, and
two COM headers with cables externally are available to be set
Onboard USB Ports:
z
z
z
Four onboard USB 2.0/ 1.1 ports
Two front USB headers come with this mainboard for additional four USB ports
Supports a maximum of eight USB ports can be set
Onboard AC’ 97 Audio CODEC:
z
z
z
z
z
High performance CODEC with high S/N ratio (>90 db)
Compliant with AC’ 97 2.3 specification
Support 6-channel playback capability (Super 5.1 Channel Audio Effect)
Support 3D stereo enhancement
Support Sony/ Philips Digital Interfaces (S/PDIF) functionality
Onboard LAN Chip:
z
z
z
Supports 10/100/1000 Mbps Ethernet LAN
Supports nVIDIA® Active ArmorTM which provides advanced data packet inspection
Supports nVIDIA® FirewallTM to protect your system from hackers and viruses
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
BIOS:
z
z
z
Phoenix-Award™ BIOS
Supports APM 1.2
Supports ACPI 2.0 power management
Green Function:
z
z
Supports Phoenix-Award™ BIOS power management function
Supports system-wake-from-power-saving-mode by keyboard or mouse touching
Shadow RAM:
z
The onboard memory controller provides the shadow RAM functionality and ROM
BIOS functionality
Flash Memory:
z
z
Supports flash memory functionality
Supports ESCD funtionality
Hardware Monitor Function:
z
z
z
Monitors CPU/ Chassis Fan Speed
Monitors CPU and system temperatures
Monitors system voltages
Watch Dog Timer:
z
This function is used for detecting the system hangs during the POST stage due to
conflicts resulting from changing the system BIOS settings. Once the problem is
detected, the system will reset the configurations and reboot the system within five
seconds.
ABS (Albatron BIOS Security):
z
z
Supports ABS Card (Optional)
Supports BIOS backup
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
Configuration
Layout of KI51PV-754 (Right Side)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
Layout of KI51PV-754 (Back Side)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
Hardware Installation
This section will assist you in quickly installing your system hardware. Wear a wrist ground strap
before handling components. Electrostatic discharge may damage your system components.
CPU Processor Installation
This mainboard supports AMD AthlonTM 64/ SempronTM processor using Socket 754. Before
building your system, we suggest you visit the AMD website and review the processor
CPU Socket 754 Configuration Steps:
1. Locate the CPU socket on your mainboard and nudge the locking lever away from the
socket. Then lift the lever to a 90-degree angle.]
2. On the socket, locate the corner which has the “diagonally cut-corner” on the rectangular
shaped pattern of pinholes (see diagram below-left). Match that corner with the “gold
triangle” on the CPU (see diagram below-right) and lower the CPU onto the socket. The
bottom of the CPU should be flush with the face of the socket.
Diagonally
Cut-corner
Gold triangle
3. Lower the lever until it snaps back into position. This will lock down the CPU.
4. Smear thermal grease on top of the CPU. Lower the CPU fan onto the CPU and use the
clasps on the fan to attach it to the socket. Finally, extend the power cable from the fan and
insert it onto the “CPUFAN” adapter.
Attention
DO NOT touch the CPU pins in case they are damaged. Also, make sure
that you have completed all installation steps before powered on the
system. Finally, double-check that the cooling fan is properly installed
and the CPU fan power cord is securely attached, in case your CPU and
other sensitive components are damaged because of high temperatures.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Mainboard KI51PV-754
FAN Headers: CPUFAN, CHASFAN
There are two fan headers available for cooling fans. The cooling fans play an important role in
maintaining ambient temperatures in your system. The CPUFAN header is attached with a CPU
cooling fan. The CHASFAN header is attached with other cooling fans.
Pin
1
Assignment
1
Ground
2
3
Power (+12V)
FAN RPM rate sense
CPUFAN/ CHASFAN
Attention
You can avoid damaging your CPU due to high temperatures with
proper cooling equipment. It is recommended that attach a cooling fan
on top of your CPU. Use the CPUFAN header to attach the fan cord.
On most fan power cord, the black wire of the fan cable is the “ground”
and should be attached to pin-1 of the header.
Memory Installation: DIMM1
The KI51PV-754 provides one DIMM (Dual In-Line Memory Modules) socket. It allows you to
install 184-pin, non-ECC & unbuffered DDR400 (PC3200)/ DDR333 (PC2700) SDRAM that
supports a total memory capacity of 1GB.
Memory Setup Steps:
1. Pull the white plastic tabs at both ends of the socket away.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|