Aiwa DVD VCR Combo HV DH1EH User Manual

HV-DH1^EH

DVD PLAYER/STEREO VIDEO

CASSETTE RECORDER

OPERATING INSTRUCTIONS

BEDIENUNGSANLEITUNG

ISTRUZIONI PER LUSO

MANUAL DEL USUARIO

GEBRUIKSAANWIJZINGEN

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

NEDERLANDS

8C-JF1-904-11

020502AMK-U-L

PAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Operation with Audio CD and MP3 Discs. . . . . . . 27

Playing an Audio CD and MP3 Discs . . . . . . . . . . . . 27

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Moving to another Track. . . . . . . . . . . . . . . . 27

ꢀ Repeat Track/All/Off . . . . . . . . . . . . . . . . . . . 27

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 27

ꢀ Changing the Audio Channel . . . . . . . . . . . . 27

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 28

Programmed Playback with Audio CD

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important notes on controlling this unit . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Front Panel and Display Window . . . . . . . . . . . . . . 6

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

and MP3 Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Programmed Playback with Video CD . . . . . . . . . . . 28

ꢀ Repeat Programmed Tracks. . . . . . . . . . . . . 28

ꢀ Erasing a Track from Program list. . . . . . . . . 28

ꢀ Erasing the Complete Program list. . . . . . . . 28

Additional Operation - VCR part . . . . . . . . . . . 29-30

On Screen Display. . . . . . . . . . . . . . . . . . . . . . . 29

Tape Counter Memory Stop . . . . . . . . . . . . . . . . 29

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Hi-Fi Stereo Sound System . . . . . . . . . . . . . . . . 30

Wide Screen Compatibility 16:9 . . . . . . . . . . . . . 30

To set the decoder . . . . . . . . . . . . . . . . . . . . . . 30

Additional Operation - DVD part . . . . . . . . . . . . . . 31

Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 31

Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 31

Special Recording . . . . . . . . . . . . . . . . . . . . . . . . . 32

Copying from DVD to VCR . . . . . . . . . . . . . . . . . 32

Recording from another video recorder . . . . . . . 32

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting to Optional Equipment . . . . . . . . . . . 10

Before Operation - VCR part . . . . . . . . . . . . . . 11-15

Tuning in a video channel on your TV. . . . . . . . . 11

Initial preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Setting the clock Manually . . . . . . . . . . . . . . . . . 12

To set the colour system . . . . . . . . . . . . . . . . . . 12

How to use the main menu. . . . . . . . . . . . . . . . . 13

Tuning in TV stations Automatically . . . . . . . . . . 13

Tuning in TV stations Manually . . . . . . . . . . . . . . 14

Changing the order of TV stations . . . . . . . . . . . 15

Deleting TV stations. . . . . . . . . . . . . . . . . . . . . . 15

Before Operation - DVD part . . . . . . . . . . . . . . 16-19

General Explanation. . . . . . . . . . . . . . . . . . . . . . 16

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 16

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 17-19

ꢀ Initial Settings General Operation. . . . . . . . . 17

ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Others (DRC/Vocal/PBC) . . . . . . . . . . . . . . . 18

ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 19

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 34

Country Code list . . . . . . . . . . . . . . . . . . . . . . . . . 35

Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Operation

About the symbols for instructions

Operation with Tape . . . . . . . . . . . . . . . . . . . . . 20-23

Playing a tape . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ꢀ AD (Advertisement) Skip. . . . . . . . . . . . . . . . . 20

ꢀ OPR (Optimum Picture Response) . . . . . . . . . 20

One-Touch Timer Recording (OTR) . . . . . . . . . . 21

ShowView programming. . . . . . . . . . . . . . . . . . . 22

Timer recording using On Screen Display. . . . . . 23

Operation with DVD and Video CD . . . . . . . . . . 24-26

Playing a DVD and Video CD . . . . . . . . . . . . . . . 24

General Features . . . . . . . . . . . . . . . . . . . . . . . . 24

ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 24

ꢀ Moving to another CHAPTER/TRACK . . . . . 24

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 24

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

ꢀ

Still Picture and Frame-by-Frame Playback. . . . . 25

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 26

Special DVD Features . . . . . . . . . . . . . . . . . . . . 26

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Changing the Audio Language. . . . . . . . . . . 26

ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Title (DVD only)

Playable Discs

The main film content or accompanying feature content

or additional feature content, or music album. Each title

is assigned a title reference number enabling you to

locate it easily.

DVD

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Sections of a picture or a musical piece that are smaller

than titles.

Audio CD

(8 cm / 12 cm disc)

In addition, this unit can play a CD-R or CD-RW that

contains audio titles or MP3 files.

A title is composed of one or several chapters. Each

chapter is assigned a chapter number, enable you to

locate the chapter you want. Depending on the disc, no

chapters may be recorded.

Notes

– Depending on the conditions of the recording equip-

ment or the CD-R/RW disc itself, some CD-R/RW

discs cannot be played on the unit.

– The unit cannot play the CD-R/RW discs that contain

no data, or contain different kinds of formatted data

other than MP3 and CD-DA data.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

– Do not use irregular shaped CDs (e.g., heart-shaped

or octagonal). It may result in malfunctions.

Track (Video CD and audio CD only)

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

A scene is composed of one or several tracks.

Notes on DVDs and Video CDs

Some playback operations of DVDs and Video CDs may

be intentionally fixed by software manufacturers. As this

unit plays DVDs and Video CDs according to disc con-

tent designed by the software manufacturer, some play-

back features of the unit may not be available, or other

functions may be added.

Refer also to the instructions applied with the DVDs and

Video CDs. Some DVDs made for business purposes

may not be played on the unit.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

Regional code of the DVD player and DVDs

This DVD player is designed and manufactured

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

for playback of region “2” encoded DVD software.

The region code on the labels of some DVD discs indi-

cates which type of player can play those discs. This unit

can play only DVD discs labeled “2” or “ALL”. If you try to

play any other discs, the message “Check Regional

Code” will appear on the TV screen. Some DVD discs

may not have a region code label even though their

playback is prohibited by area limits.

Note on DTS-encoded CDs

Do not play back DTS-encoded CDs when connecting

to an AV receiver not equipped with a DTS decoder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Cont’d)

Precautions

Storing discs

After playing, store the disc in its case.

Handling the unit

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packed at the factory.

Cleaning discs

When setting the unit

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

The picture and sound of a nearby TV or radio may be

distorted during playback. In this case, position the unit

away from the TV or radio, or turn off the unit after

removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber of plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

Cleaning the unit

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents, such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

About Symbols

About the

symbol display

To obtain a clear picture

The DVD player is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn down, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

“

” may appear on the TV screen during operation.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is

applicable only to the disc represented by the symbol.

For details, please contact your nearest dealer.

DVD

Notes on Discs

VCD2.0

Video CDs with the PBC (playback control)

function.

Handling discs

VCD1.1

Video CDs without the PBC (playback control)

function.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

Audio CDs.

Do not stick paper or tape on the disc.

MP3 MP3 disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel and Display Window

Tape Eject

PAUSE (

)

Pause playback temporarily / press repeatedly

for frame-by-frame playback.

POWER 6STANDBY/ON

Switches the unit to

ON or OFF.

STOP ( ^Á)

Stops playback.

PLAY ( G)

Starts playback.

Forward Skip/Scan, Fast-Forward (

)

Go to next chapter/track.

Press and hold for two seconds for a fast forward search.

Winds the tape forwards.

Reverse Skip/Scan, Rewind (

)

OPEN/CLOSE (

Opens or closes the disc tray.

)

Go to beginning of current

chapter/track or to previous chap-

ter/track. Press and hold for two

seconds for a fast reverse search.

Rewinds the tape.

Disc Tray

Insert a disc here.

Tape Compartment

POWER

EJECT

OPEN/CLOSE

STANDBY/ON

AV3 IN

L–AUDIO –R

REC/OTR

PLAY

STOP

PAUSE

VIDEO

DVD/VCR

CHANNEL

DVD

VCR

DVD/VCR

Indicator

Display window

Shows the current

status of the unit.

VCR Record

Channel Programme Selectors

Remote Sensor

Video Jack

Audio (L/R) Jacks

DVD/VCR

Selector

Point the remote control here.

TITLE Indicates current title number

PROG. Programmed playback active

CHP/TRK Indicates current chapter or track number

VCR’s internal tuner is engaged

A timer recording is programmed or in progress

Channel programme

MP3 MP3 disc inserted

ANGLE active

VCR recording is engaged

Indicates total playing time/elapsed time

Child Lock is engaged

Bilingual mode

Indicates repeat mode

CD Audio CD inserted

The Hi-Fi track of a VHS

tape is playing

DVD

DVD inserted

VCD Video CD inserted

Cassette-In indicator

The current TV

show or video is

broadcast in stereo

Displays the

recording and

playback speed

REC

HI-FI

PROG. TITLE CHP/TRK VCR TIMER

CDREC

ALL MP3

BIL PR

VCD

DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

DVD/VCR select button

Selects operational mode of remote

control.

POWER

Switch this unit ON or OFF.

TV/VCR

Switch between your TV’s tuner and

the VCR’s internal tuner.

OPEN/CLOSE

EJECT (Z)

- Open or close the the disc tray.

- Tape Eject.

OUTPUT SELECT

Select one of your output sources

to view on the TV screen.

DISC MENU

Access menu of a DVD disc.

OK/ENTER

DISPLAY

CLK/CNT

Access the On-Screen Display.

Shows you the current time or counter.

F/G/D/E (left/right/up/down)

- Select an item in the menu

CH/TRACKING (v/V): Select channel

Acknowledge menu selection.

Select input source for recording

into tape.

REC/OTR

Record your input sources into tape.

•

programme of VCR.

i/SETUP

Access or remove setup menu.

- Search forward* / go to next

chapter or track.

- Winds the tape forwards.

* Press and hold button for about

TOP MENU •

Display the title menu of the disc if

available.

PAUSE/STEP ( ) •

Pause playback temporarily / press

repeatedly for frame-by-frame

playback.

STOP ( ^Á) •

Stops playback.

0-9 numerical buttons

Select numbered items in a menu.

two seconds.

• PLAY

Starts playback.

•

- Search backward* / go to beginning

of current chapter or track or go

to previous chapter or track.

- Rewinds the tape.

* Press and hold button for about

two seconds.

PROGRAM

Access or remove program menu.

AUDIO •

Select an audio language (DVD) or

an audio channel (CD).

CLEAR

- Clear a track number on the

program menu or a mark on the

MARKER SEARCH menu.

- Reset tape counter to zero.

SUBTITLE •

Select a subtitle language.

MARK •

Mark any point during playback.

• REPEAT

- Repeat chapter, track, title, all.

• A-B/SPEED

SEARCH •

Display MARKER SEARCH menu.

ANGLE •

Select DVD camera angle if available

RETURN •

- Remove the setup menu.

- Displays the menu of a video CD

with PBC.

C.LOCK

Switch the Child Lock on and off.

- Repeat sequence.

- Select the recording speed of the

tape.

• RANDOM/AD-SKIP

- Play tracks in random order.

- CM SKIP

• ZOOM

Enlarge video image.

• SHOWVIEW

To display the programme menu for

ShowView programming.

Remote Control Operation Range

Remote control battery installation

Point the remote control at the remote sensor and press

the buttons.

Detach the battery cover on the rear of

the remote control, and insert two R03

^ꢀDistance: About 7 m from the front of the remote

sensor

^ꢀAngle: About 30° in each direction of the front of the

remote sensor

(size AAA) batteries with

aligned correctly.

and

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

AUDIO OUT (Left/Right)

Connect to an amplifier, receiver or stereo system.

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

AERIAL

Connect the aerial using this jack.

EURO AV2 DECODER

Connect to pay-TV decoder or another video recorder.

DVD EXCLUSIVE OUT

VCR IN+OUT/DVD OUT

AUDIO

OUT

DIGITAL

AUDIO OUT

AERIAL

EURO AV2

DECODER

COAXIAL

EURO AV1

AUDIO/

RF.OUT

VIDEO

DVD/VCR

OUT

VIDEO OUT

AC Power Cord

Connect to a power

source.

EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)

Connect to your TV set or another video recorder.

RF.OUT

Connect to your TV using this jack.

VIDEO OUT

Connect to a TV with video inputs.

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

DVD exclusive out connection

^ꢀYou can only watch the DVD playback.

Tips

^ꢀDepending on your TV and other equipment you wish

to connect, there are various ways you could connect

the unit.

^ꢀPlease refer to the manuals of your TV, Stereo

System or other devices as necessary to make the

best connections.

Connect the VIDEO OUT jack on this unit’s DVD

EXCLUSIVE OUT to the video in jack on the TV

using the video cable.

Connect the Left and Right AUDIO OUT jacks of

^ꢀFor better sound reproduction, connect this unit’s

AUDIO OUT jacks to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment.

See “Connecting to optional equipment” on page 10.

this unit’s DVD EXCLUSIVE OUT to the audio left/

right in jacks on the TV using the audio cables.

Rear of this unit (DVD exclusive out connection)

Caution

VCR IN+OUT/DVD OUT

DVD EXCLUSIVE OUT

– Make sure this unit is connected directly to the TV. Set

the TV to the correct video input channel.

– Do not connect this unit’s AUDIO OUT jack to the

phono in jack (record deck) of your audio system.

AUDIO

OUT

DIGITAL

AUDIO OUT

AERIAL

EURO AV2

DECODER

COAXIAL

RF.OUT

EURO AV1

AUDIO/

VIDEO

DVD/VCR

OUT

VIDEO OUT

Connecting to a TV

^ꢀMake one of the following connections, depending on

the capabilities of your existing equipment.

Basic connection (AV)

Connect the EURO AV1 AUDIO/VIDEO on the rear

panel of this unit to the SCART input socket on the

TV using a SCART lead.

Rear of TV

VIDEO

INPUT

AERIAL

SCART INPUT

AUDIO INPUT

Some TV broadcasters transmit encoded television

signals which you can only see with a purchased or

rented decoder. You can caonnet such a decoder

(descrambler) to this unit.

Satellite

Basic connection (RF)

Connect the RF antenna cable from your indoor/

outdoor antenna to AERIAL jack on the rear panel

of this unit.

Connect the supplied RF antenna cable from the

RF.OUT jack on the rear panel of this unit to your

television’s Antenna Input.

VHS IN+OUT/DVD OUT

DVD EXCLUSIVE OUT

AUDIO

OUT

DIGITAL

AUDIO OUT

AERIAL

EURO AV2

DECODER

COAXIAL

RF.OUT

EURO AV1

AUDIO/

VIDEO

DVD/VCR

OUT

VIDEO OUT

Rear of this unit (Basic connection)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Cont’d)

Connecting to Optional Equipment

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

– To see the audio format of the current DVD in the On-

Screen Display, press AUDIO.

Connect the Left and Right AUDIO OUT jacks on this

unit to the audio left and right in jacks on your amplifier,

receiver or stereo system, using the audio cables.

Accessory Audio/Video (A/V) Connections to

this unit

Connect the AV 3 IN jacks on the unit to the audio/video

out jacks on your accessory component, using the

optional audio/video cables.

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/

Video receiver equipped with a multi-channel

decoder (Dolby Digital™, MPEG 2 or DTS)

Connect this unit’s DIGITAL AUDIO OUT jack

(COAXIAL) to the corresponding in jack on your

amplifier. Use an optional coaxial audio cable.

You will need to activate this unit’s digital output.

(See “Digital Audio Output” on page 18).

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your unit (MPEG 2, Dolby

Digital and DTS). Check the receiver manual and the

logos on the front of the receiver.

Warning:

POWER

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

STANDBY/ON

AV3 IN

L–AUDIO –R

VIDEO

DVD

VCR

Rear of this unit

VCR IN+OUT/DVD OUT

DVD EXCLUSIVE OUT

AUDIO

OUT

DIGITAL

AUDIO OUT

AERIAL

EURO AV2

DECODER

COAXIAL

RF.OUT

EURO AV1

AUDIO/

VIDEO

DVD/VCR

OUT

VIDEO OUT

2 channel analog stereo or Dolby Surround connection.

DVD exclusive out

Digital multi-channel

connection

COAXIAL

DIGITAL INPUT

AUDIO INPUT

Amplifier (Receiver)

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Press CHANNEL N or M to select another video

channel.You may select any channel number

between 22 and 68.

You can also set it to “OFF” if there is any

interference when your TV is connected to the

VCR with a SCART lead.

Tuning in a video channel on your TV

Notes

^ꢀThe output frequency of this video recorder

(VCR) is set at UHF channel 36. If channel 36

is already used by another TV station, or if the

picture is distorted, you can change the

transmitter channel of your VCR. Stages 5 ~ 8

will show you how to change the output

frequency of your VCR.

Select a TV channel number on which you wish to

watch video’s.

Press POWER 6STANDBY/ON on the front of your

VCR when you have finished.

Tune this channel so that a bright blue screen

appears.

Store this channel on your TV.

^ꢀYour TV receives signals from the video

recorder (VCR) like another TV station. You

have to select a channel number on your TV

and tune it in so that you may watch video

tapes. If you have used a SCART or AUDIO

and VIDEO cables then your TV should already

have a dedicated video channel built into it,

usually called AV.

Notes

Make sure that you have correctly installed your

VCR and successfully tuned in a dedicated video

channel on your TV. If you do not tune in a

dedicated video channel on your TV you will be

unable to view and record video tapes!

Make sure that you have correctly installed your

VCR as described earlier in this book.

Press POWER to turn on your VCR.

Turn on your TV.

Initial preset

For the following steps we do assume that you have just

connected your video recorder for the very first time. In

this case the video recorder is on after mains connection.

You should not touch any buttons yet. On the connected

TV you will now see.

Insert a pre-recorded video tape into your VCR

and press PLAY on the remote control.

Select a TV channel number on which you wish to

watch video’s.

Don’t worry if you don’t have a video-tape to play at

this stage! If you switch your VCR on and continue

stages 3 ~ 4, instead of seeing video playback tune

your TV until you see a bright blue screen.

Note - If this menu does not appear, your video recorder

was programmed already.

Select the country according to your area with

F and G.

Tune this channel until the video picture is sharp

and the sound is clear.

If you have used a SCART or AUDIO and VIDEO

cables you will not have to tune your TV, simply

select the AV channel. The AV channel is already

pre-tuned for optimum video playback on your TV.

“A”: Austria, “B”: Belgium, “CH”: Switzerland, “D”:

Germany, “DK”: Denmark, “E”: Spain, “F”: France,

“I”: Italy, “N”: Norway, “NL”: Netherlands, “P”:

Portugal, “S”: Sweden, “SF”: Finland, “AUTRES”:

Others

Store this channel on your TV.

You will need to look at the TV instruction book if

you do not know how to do this.

Only carry out stages 5 ~ 8 if you cannot obtain

clear video playback as described in stages 1 ~ 4.

Select a TV channel number on which you wish to

watch video’s.

SF ANDERE

Pr-12

ACMS

Make sure that your VCR is in standby pressing

POWER on the remote control (only the clock will

be displayed).

Press OK/ENTER to start the automatic storing of

the channels of the TV stations in your area.

Press CHANNEL N or M on the front of your

VCR for more than 4 seconds.

RF36 will appear in the display window.

The following picture will be displayed on the TV

screen.

C02

00 ARD

Pr-12

ACMS

RF CHANNEL 36

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Setting the clock Manually

To set the colour system

The clock in your VCR controls time and date

settings for your VCR.

Press i/SETUP.

The clock is set automatically during ACMS

(Automatic Channel Memory System) when your

VCR detects a channel that broadcasts a Teletext

signal. If the broadcast signal is weak the clock

will not be set and will require setting manually.

2 ^{The main menu will appear on the TV screen.}

Press or to select the SYSTEM and press

OK/ENTER.

Press i/SETUP.

Press or to select TIME DATE.

Press OK/ENTER.

Press or to select according to the COLOUR

system used.

The auto adjust mode can be set to “OFF” by pressing

or if you want to set the time manually.

Press OK/ENTER.

A B

Pr-12

_SA_ETUTO

TIME SYS-

DATE

TEM

REC

ACMS

OSD

SYS-

TEM

PAL

ME_D⁺S_ECE_OC_-AM

OSD

OFF

16:9

4:3

OPR

DER

AUTO ADJUST

- -

Press i/SETUP to remove the menus from the TV

screen.

TIME

DATE

HH MM DD MM YY

- - - - -

- -

TIME

DATE

Use the numbered buttons on the remote control

to alter the HOURS, MINUTES, DAY, MONTH and

YEAR.

Please note your VCR uses a 24 hour clock. e.g.

1pm will be displayed as 13:00.

The day of the week will appear automatically when

you enter the year.

HH MM DD MM YY

02 TUE

TIME

DATE

If you make a mistake press or and enter the

correct details.

4 ^{Press i/SETUP.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

How to use the main menu

Tuning in TV Stations Automatically

This VCR can easily be programmed by using the

menus displayed on screen.

The menus are controlled from the Remote

Control Handset.

If the TV broadcast signal is weak your VCR may

not detect the necessary information and will be

and to store them correctly. To overcome this problem

please turn to the MANUAL TUNING section on

page 14.

Switch on your TV set and video recorder by pressing

the POWER button.

Press POWER to turn on your VCR.

Press i/SETUP button.

The main menu will appear on the TV screen.

Press i/SETUP button.

The main menu will appear on the TV screen.

Press or to select the ACMS.

Press OK/ENTER.

A B

Pr-12

TIME SYS-

SET

REC

ACMS

OSD

DATE

TEM

REC

OSD

OFF

16:9 DECO-

4:3

DER

OPR

A B

Pr-12

TIME

SYS-

TEM

SET

REC

ACMS

OSD

DATE

Pr-12

ACMS

OSD

DECO-

DER

16:9

4:3

^ꢀREC - Timer recording setting (see p. 23).

^ꢀPR SET - Manual tuning setting (see p. 14).

^ꢀACMS - ACMS (Automatic Channel Memory

System) (see p. 13).

OPR

OFF

^ꢀTIME DATE - Date & clock setting (see p. 12).

SYSTEM - To set the Colour TV System

(see p. 12).

SF OTHERS

Pr-12

ABC OSD - To change the language setting for

OSD.

ACMS

You can select the language among

English, Deutsch, Français, Italiano,

Español and Dutch.

Press or to select COUNTRY.

(A:Austria, B:Belgium, CH:Switzerland,

D:Germany, DK:Denmark, E:Spain, F:France,

I:Italy, N:Norway, NL:Nertherlands, P:Portugal,

S:Sweden, SF:Finland, Others)

Press OK/ENTER again to start the automatic tun-

ing process.

The VCR’s clock will be set automatically when

automatic tuning has finished. If the clock is wrong

please see “Setting the clock manually” on page 12.

F.OSD ON/OFF - Turn the on-screen display on

or off (see p. 29).

16:9/4:3 - To select the aspect ratio of your TV

(see p.30).

DECODER - To use a pay-TV decoder (or Satellite)

with your VCR (see p. 30).

OPR - To improve the playback picture

(see p. 20).

C02

C03

C04

ARD

ZDF

WDR 3

Press and to select the desired menu.

Press OK/ENTER and press or to select.

4 ^{Press i/SETUP to return to a TV picture.}

Pr-12

ACMS

The TV STATION TABLE will appear when tuning is

complete.

Press i/SETUP to save your settings.

C02

C03

C04

C05

C06

C07

C08

C09

ARD

ZDF

WDR 3

BR3

HR3

N 3

NDR 3

SWF3

MOVE :

DELETE :

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Tuning in TV Stations Manually

In certain areas of the country broadcast signals

may be too weak for your VCR’s automatic tuning

process to find or assign TV stations correctly.

You must tune in these weaker broadcast stations

manually in order for your VCR to store them.

Press to select STATION so that you may name

your TV station.

Press OK/ENTER.

The TV station name list will appear.

ARD

ZDF

WDR 3

BR3

HR3

N 3

C10

MFT

NDR3

SWF3

Press i/SETUP.

The main menu will appear on the TV screen. Press

or to select the PR SET.

Press OK/ENTER.

SET

Press D or E to select a station name from the list.

Press OK/ENTER to select it.

If your station name isn’t on the list do not press

OK/ENTER, but go to stage 7.

A B

Pr-12

TIME SYS-

SET

REC

ACMS

OSD

DATE

TEM

SET

ARD

ZDF

OSD

OFF

16:9

4:3

DECO-

DER

OPR

WDR 3

BR3

HR3

N 3

C10

MFT

NDR3

SWF3

C 02

MFT

STATION

PR-01

SET

CHANNEL/CABLE : AV

You can change a TV station name manually rather

than using the “standard” names.

Press ^G.

Press or to select letters and numbers for the

new station name.

SET

Press i/SETUP.

The station table will appear.

Press or to select the programme number that

you want to tune (for example, PR 09).

Press or to move back and forth between char-

acters.

Press OK/ENTER.

C02

C03

C04

C05

C06

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

C09

C10

MFT

STATION

ZDF

MOVE :

DELETE :

SET

Press OK/ENTER.

3 _{Press AV to select C (Standard stations) or S}

Press i/SETUP, confirm the station placement.

Press i/SETUP again.

Your new TV station has now been tuned into your VCR.

If you wish to manually tune other stations repeat

stages 1 - 8.

(Cable stations):

C02 - C69, S01 - S41.

Enter the channel number of station that you want

to tune with the numbered buttons or use or

to find the required station.

C10

ZDF

- -

- - - - -

C - -

MFT

- -

STATION

- - - -

CHANNEL/CABLE : AV

MOVE :

DELETE :

SET

Searching will stop when it locates a stations.

Press to select MFT.

Press or

to adjust.

C10

MFT

STATION

CHANNEL/CABLE : AV

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR part

Changing the order of TV Stations

Deleting TV Stations

After tuning TV stations into your VCR you may wish

to change the order in which they are stored without

having to retune them against! The instructions given

on this page will show you how you can simply move

them into your desired order.

After tuning TV stations into your VCR you may wish

to delete a station.

The instructions given on this page will show you

how easily delete any unwanted TV stations.

Press i/SETUP.

The main menu will appear on the TV screen. Press

or to select the PR SET. Press OK/ENTER.

Press i/SETUP.

The main menu will appear on the TV screen. Press

or to select the PR SET. Press OK/ENTER.

A B

Pr-12

TIME SYS-

SET

REC

ACMS

OSD

DATE

TEM

SET

A B

Pr-12

OSD

OFF

TIME SYS-

SET

16:9

4:3

REC

ACMS

DECO-

DER

OSD

DATE

TEM

OPR

SET

OSD

OFF

DECO-

DER

16:9

4:3

OPR

C 02

MFT

STATION

PR-01

C 02

MFT

STATION

PR-01

CHANNEL/CABLE : AV

SET

Press i/SETUP.

Press or to select the programme number

you want to delete. (for example, PR 03)

you want to move (for example, PR 03).

Press

C02

C03

C04

C05

C06

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

C02

C03

C04

C05

C06

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

MOVE :

DELETE :

SET

MOVE :

SET

DELETE :

OK i

Press

After a short while, the selected station will be

deleted.

C02

C03

C04

PR-01

PR-02

PR-03

C05

PR-04

PR-05

PR-06

PR-07

PR-08

C06

C07

C08

C09

C02

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

C03

C05

C06

C04

C07

SET

C08

C09

PR-07

PR-08

MOVE :

Press or to select the programme number

you want to move to (for example, PR 05).

DELETE :

SET

Press i/SETUP to remove the menus from the TV

C02

C03

C05

C06

C04

PR-01

PR-02

PR-04

PR-05

PR-03

screen.

If you wish to delete other TV stations repeat stages

1 - 3.

C07

C08

C09

PR-06

PR-07

PR-08

C02

C03

C06

C04

C07

C08

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

SET

C09

C10

PR-07

PR-08

Press OK/ENTER.

The selected programme will be moved to the new

programme number.

MOVE:

DELETE :

SET

If you wish to move other TV stations repeat stages 1 - 4.

Press i/SETUP to remove the menus from the TV

screen.

How to select Stored TV stations:

Stored TV stations can be selected in either of two ways.

Press PROG. or to select different stations that are

tuned into your VCR.

You may also directly select stations using the

numbered buttons on the remote control.

C02

C03

C05

C06

C04

C07

C08

C09

PR-01

PR-02

PR-03

PR-04

PR-05

PR-06

PR-07

PR-08

MOVE :

DELETE :

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD part

General Explanation

This manual gives the basic instructions for operating

this unit. Some DVDs require specific operation or allow

only limited operation during playback. When this

Temporary Feedback Field Icons

TITLE

Repeat Title

CHAPT

Repeat Chapter

TRACK

Repeat Track (non-PBC Video CDs only)

occurs, the symbol

appears on the TV screen,

ALL

indicating that the operation is not permitted by this unit

or is not available on the disc.

Repeat All Tracks (non-PBC Video CDs only)

Repeat A-B

OFF

Repeat Off

On-Screen Display

The general playback status can be displayed on the TV

Resume play from this point

Action prohibited or not available

screen. Some items can be changed on the menu.

On-screen display operation

Notes

Press DISPLAY during playback.

ꢀ Some discs may not provide all of the below On-

Screen Display.

ꢀ If no button is pressed for 10 seconds, the On-Screen

Display disappears.

Press or to select an item.

The selected item will be highlighted.

Press or to change the setting of an item.

The number buttons can be also be used for setting

numbers (e.g., title number). For some functions,

press OK/ENTER to execute the setting.

DVD

Items

Function (Press

to select desired item)

Selection Method

Title Number

Shows the current title number and total number of

, or

1/3

1/12

titles, and skips to the desired title number.

Numbers, OK/ENTER

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or

Numbers , OK/ENTER

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

0:16:57

Numbers , OK/ENTER

Audio language

and Digital Audio

Output mode

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

ENG

6 CH

Subtitle language

Shows the current subtitles language, and

OFF

1/1

changes the setting.

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

Sound

Shows the current sound mode, and

changes the setting.

NORM.

VCD1.1

VCD2.0

Items

Function (Press

to select desired item)

Selection Method

Track Number

Shows the current track number, total number of tracks

and PBC On mode, and skip to the desired track number.

, or

1/4

Numeric, OK/ENTER

Time

Shows the elapsed playing time (Display only)

0:16:57

–

Audio Channel

Sound

Shows the audio channel, and

STER.

changes the audio channel.

Shows the current sound mode, and

changes the setting.

NORM.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Menu Language

Select a language for the setup menu. This is the menu

you see when you press i/SETUP.

Initial Settings

You can set your own Personal Preferences on this unit.

Initial Settings General Operation

English

Spanish

French

German

Italian

Disc Audio

Disc Subtitle

Disc Menu

Rating

Press i/SETUP.

The setup menu appears.

Country Code

TV Aspect

Menu Language

Original

English

Disc Audio

Disc Subtitle

Disc Menu

Rating

Digital Audio Output

Others

French

German

Spanish

Italian

Country code

TV Aspect

Menu Language

Chinese

Polish

Digital Audio Output

Others

Hungarian

Russian

Other — — — —

Picture

DVD

TV Aspect

Press

to select the desired item.

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

The screen will show the current setting for the

selected item, as well as alternate setting(s).

3 ^{While the desired item is selected, press}

, then

to select the desired setting.

Press OK/ENTER to confirm your

selection.

Some items require additional steps.

16:9 Wide: Select when a 16:9 wide TV is connected.

Press i/SETUP, RETURN or PLAY to exit the

setup menu.

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Language

Menu Language

DVD

Disc Language

Digital Audio Output

Others

Select a language for the disc’s Menu, Audio, and

Subtitle.

Original : The original language set for the disc is selected.

Other : To select another language, press number buttons to

enter the corresponding 4-digit number according to the lan-

guage code list on page 34. If you enter the wrong language

code, press CLEAR.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

Rating

French

German

Spanish

Italian

Country code

TV Aspect

Menu Language

Chinese

Polish

Digital Audio Output

Others

Hungarian

Russian

Other — — — —

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Sound

Others

Digital Audio Output

The DRC, Vocal and PBC settings can be changed.

ꢀ Press

to select the desired item and press

Each DVD disc has a variety of audio output options.

Set the player’s Digital Audio Output according to the

type of audio system you use.

OK/ENTER. The setting of the selected item is

changed between On and Off.

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”

if you connected this unit’s DIGITAL OUT jack to a

Dolby Digital decoder (or an amplifier or other equip-

ment with a Dolby Digital decoder).

DRC Off

Vocal Off

PBC On

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Stream/PCM: Select “Stream/PCM” if you connected

this unit’s DIGITAL OUT jack to an amplifier or other

equipment with a DTS decoder, Dolby Digital decoder

or MPEG decoder.

Menu Language

Digital Audio Output

Others

PCM: select when connected to a 2-channel digital

stereo amplifier. This unit outputs sounds in the PCM

2ch format when you play a DVD video disc recorded

on the Dolby Digital, MPEG1, or MPEG2 recording sys-

tem.

Dynamic Range Control (DRC)

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

DOLBY

_DIGITAL/PCM

Stream/PCM

PCM

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Sample Freq.

48 KHz

Menu Language

96KHz

Digital Audio Output

Others

Vocal

Set Vocal to On only when a multi-channel karaoke DVD

is playing. The karaoke channels on the disc will mix

into a normal stereo sound.

Sample Frequency

To change the Sample Frequency setting, first select the

desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz sig-

nals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

CAUTION

DO NOT select “DOLBY DIGITAL/PCM” or

“Stream/PCM” for the “Digital Audio Output” in the

setup menu when connecting to an AV receiver not

equipped with a Dolby Digital decoder or DTS

decoder (with a coaxial connecting cord).

Merely attempting to play a disc may cause a

screeching noise which could be harmful to your

ears and damage the speakers. In this case, be

sure to select “PCM” for the “Digital Audio

Output”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued) - DVD part

Parental Control

DVD

Country Code

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list

(See “Country Code List”, page 35.).

DVD

Rating

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated from

1 to 8, and alternatively, more suitable scenes are avail-

able for selection on some discs. Ratings are

country-dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Code Set

D E

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Disc Audio

Disc Subtitle

Disc Menu

Rating

Select Country Code using the

the setup menu.

buttons on

Country Code

TV Aspect

Menu Language

2 ^{While Country Code is selected, press}

Digital Audio Output

Others

Unlock

Change

3 ^{Follow step 3 of “Rating” on left.}

4 ^{Select the first character using the}

buttons.

Select “Rating” on the Setup menu using the

and buttons.

Shift the cursor using

buttons and select

2 ^{While “Rating” is selected, press}

the second character using

buttons.

Press OK/ENTER to confirm your country code

selection, then press i/SETUP to exit the

menu.

When you have not entered a password yet.

Enter a 4-digit password using the numbered but-

tons to create a personal 4-digit security password,

then press OK/ENTER. Enter the 4-digit password

again and press OK/ENTER to verify.

When you have already entered a password;

Enter a 4-digit password using the numbered but-

tons to confirm the personal 4-digit security pass-

word, then press OK/ENTER.

Note

Confirmation of the 4-digit password is necessary when

the code is changed (see “Changing the 4-digit code”

below ).

Changing the 4-digit code

If you make a mistake before pressing OK/ENTER, press

CLEAR and enter 4-digit security password again.

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old code, then press OK/ENTER.

3 Select Change using the

buttons then press

Select a rating from 1 to 8 using the

but-

OK/ENTER.

tons. One (1) has the least playback restrictions.

Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is not

active. The disc will play in full.

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the play-

er, all disc scenes with the same rating or lower will

be played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or a

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

4 Enter the new 4-digit code, then press OK/ENTER.

5 Enter exactly the same code a second time and veri-

fy by pressing OK/ENTER.

6 Press i/SETUP to exit the menu.

If you forget your 4-digit code

If you forget your password, to clear the current pass-

word, follow the procedure below.

1 Press i/SETUP to display the setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

The 4-digit password is cleared.

Press OK/ENTER to confirm your rating selec-

tion, then press i/SETUP to exit the menu.

Enter a new code as shown above to the left (Rating).

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Playing a tape

Slow motion playback, Shuttle :

During playing back or still picture press F or G.

You can reach the following playback speeds.

(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,

7xplay)

To switch off the slow motion and shuttle, press the

desired function.

During slow motion and shuttle, the noise bars may

appear on the picture according to the status of

tape.

You will only be able to load and eject video cassettes

when your VCR is plugged into the mains.

Your VCR may also playback recordings from NTSC

tapes (on PAL TV).

Getting a better picture

When a cassette is inserted and playback started, the

automatic tracking function works to get the best

possible picture automatically. If the quality of the

recording is poor, repeatedly press CH/TRACKING

or on the remote control or CHANNEL N or M

on the front panel to manually adjust the tracking

until any distortions have been removed. Press num-

bered 0 on the remote control to switch automatic

tracking back on again.

If distortions can be seen in the picture, reduce

them with CH/TRACKING ^Dor E.

Press STOP to end playback.

Press EJECT.

If the end of the tape is reached, your VCR will stop

playback automatically, rewind, stop, eject the tape.

AD (Advertisement) Skip:

This feature enables you during playback of a tape to

skip a commercial break in a few seconds, then resume

normal playback.

While tape is playing press AD-SKIP on the remote

control to skip commercial (or another programme

material).

Repeatedly press AD-SKIP to skip:

1 Press 30 seconds

2 Press 60 seconds

Make sure that you have correctly connected your

VCR as described earlier in this book.

Turn on your TV.

Press POWER to turn on your VCR.

Insert the video cassette into your VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

3 Press 90 seconds

4 Press 120 seconds

5 Press 150 seconds

6 Press 180 seconds

Press PLAY to start playing your tape.

If you load a video cassette which has had its

record protection tab removed, playback of the cas-

sette will start automatically.

OPR (Optimum Picture Response)

AUTO TRACKING

Your VCR will automatically adjust the tracking to

give the best picture quality.

This feature automatically improves playback picture

quality by adjusting your VCR to the condition of the

tape.

Press PAUSE/STEP to still a picture.

Press PAUSE/STEP repeatedly to advance the tape

frame by frame.

If you hold down t, the picture will be slowed

down at about 1/19 times the normal playback.

Tapes can be paused for up to 5 minutes. After 5

minutes your VCR will stop the tape to prevent

damaging the tape or your VCR .

Press i/SETUP.

2 ^Press

or to select OPR.

3 ^{Press OK/ENTER.}

Still picture quality can be improved slightly by

pressing CH/TRACKING

Press PLAY to continue playing your tape.

Picture search:

During playing back press either t or r to this

will enable you to rapidly wind the tape (7 times

normal playback) see where you are on the tape.

A B

OFF

Pr-12

SYS-

TEM

TIME

SET

REC

ACMS

SOFT

OSD

DATE

_OSDSHARP

OPR

16:9 DECO-

4:3

DER

OPR

OFF

Logic search:

During fast forwarding or rewinding press and hold

t or r the picture will be played back at 7

times normal playback speed.

Press

SHARP.

or repeatedly to select: OFF, SOFT or

Please note you may only set OPR when

playing a tape.

5 ^{Press i/SETUP return to screen.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Press SPEED if you wish to record in Long Play or

Standard Play.

SP will produce improved picture and sound quality,

however LP will provide twice as much recording

time as SP.

One-Touch Recording (OTR)

Your VCR allows you to make recordings using a

variety of simple methods:

One-Touch Recording (OTR) start recording

immediately for a set period of time or until the

video cassette runs out.

Press REC/OTR to start recording.

RECORD will appear on the TV screen.

Press REC/OTR several times. Each successive

press will increase the record time by 30 minutes

until you reach a maximum of 9 hours.

Your VCR incorporates Long Play (LP) which

enables you to record up to twice the amount of

time on a video cassette. For example an E-180 will

record up to 180 minutes using Standard Play (SP);

using LP you will be able to record up to 360 minutes.

Please note there will be a slight loss in picture and

sound quality when using LP.

Press PAUSE/STEP to avoid recording unwanted

scenes.

Press PAUSE/STEP to continue recording.

Tapes can be paused for up to 5 minutes; RECP

will be displayed when a tape is paused. After 5

minutes your VCR will stop recording to prevent

damaging the tape or your VCR.

Make sure that you have correctly connected your

VCR as described earlier in this book.

Press POWER to turn on your VCR.

Press STOP to end recording.

Press EJECT.

EJECT will appear on the TV screen for a few

seconds.

Insert a video cassette with protection tab into your

VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

Notes

ꢀ If you do not wish to record on a tape (this can happen

quite easily by accident!) remove the protection tab on

the back edge of the video cassette.

ꢀ It is possible to record on a video cassette with the

record protection tab removed by covering the hole

with self adhesive tape.

ꢀ Remember you can record one programme while

watching another by starting your one-touch recording,

press TV/VCR to select TV mode and then selecting a

different channel on your TV.

Press

you wish to record.

You may also directly select programme number

using the numbered buttons on the remote control.

or to select the programme number

If you wish to record directly from the SCART or

RCA sockets repeatedly press AV until the socket

you wish to record from is displayed.

AV 1 for recording from EURO AV1 SCART socket

on the rear of your unit.

AV 2 for recording from EURO AV2 SCART socket

on the rear of your unit.

AV 3 for recording from AV 3 IN VIDEO and AUDIO

(Left & Right) sockets on the front of your unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Press F or G to select the settings that you wish to

revise. (PR, DATE, TIME, VPS and SP).

ShowView Programming

Press D or E to enter the correct information.

ShowView greatly simplifies entering the date,

channel, start and end times of a Timer Recording

by simply entering a ShowView Code. ShowView

Codes are published in most TV guide magazines;

they can vary one to nine numbers in length.

DATE

TIME

ARD

- -

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

- -

SHOWVIEW is a registered trademark of Gemstar

Development Corporation.

The SHOWVIEW system is manufactured under

licence from Gemstar Development Corporation.

Press D or E to switch VPS/PDC on or off.

Press G to select the recording speed.

Press D or E to select the desired tape speed (SP,

IP, or LP).

IP mode determines how much tape is left and

switches speed from SP to LP, if necessary, to

complete recording the program.

IP mode is not selected when VPS/PDC is ON.

Check that the timer event details are correct.

If you wish to record from AV 3 IN AUDIO and

VIDEO on the front or from either of the EURO

SCART sockets on the back of VCR, press AV to

select for correct display (AV1, AV2 or AV3).

Make sure that TV channels have been tuned and

stored in correct SHOWVIEW order.

Insert a video cassette with protection tab into your

VCR.

Press SHOWVIEW.

- - - - - - - - -

ARD

- -

DATE

TIME

- -

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

ONCE

REC SHOWVIEW

0~9,

Press D or E to select the recording type.

ONCE: To record once.

WEEKLY: To record at the same time every week.

DAILY: To record every day (except Saturday and

Sunday) at the same time.

If you want to make another ShowView recording

repeat stages 2 - 7.

Press i/SETUP twice.

If PLEASE CHECK is displayed, you have entered

incorrect information and will need to re-enter the

data.

Press the numbered buttons to enter the

ShowView Code of the TV programme that you

wish to record.

If you make a mistake press F then enter the

revised number.

Press POWER to switch your VCR power off mode.

TIMER will appear in the video recorder’s display

while your VCR waits to make the recording.

246876543

Notes

ONCE

SHOWVIEW

ꢀ Video Programme System (VPS)

0~9,

REC

The Video Programme System (VPS) ensures that the

TV programmes that you have programmed for timer

recording will be recorded exactly from their beginning

to end, even if the actual broadcasting time differs from

the scheduled time due to delayed start, or if the pro-

gramme is extended beyond its scheduled time. Also, if

a programme is interrupted, for example, if a news flash

is inserted, the recording will also be interrupted auto-

matically and resumed when the programme contin-

ues.

Press OK/ENTER.

If PLEASE CHECK is displayed it means that you

have entered the wrong ShowView number, entered

the ShowView number incorrectly.

If “- -” is displayed, you have to enter the pro-

gramme number of the station, you want to record

from.

The VPS signal is broadcast by the TV station and this

controls the timer in the video recorder.

DATE

TIME

ARD

- -

10:11~11:55

- -: - -~ - -: - -

- -: - -~- - : - -

VPS should be set ON for all timer recordings from TV

stations broadcasting these signals. It should be set

OFF for all timer recordings from TV stations that are not

broadcasting these signals.

- -

*** The similar system PDC, which is used in the time

being in the Netherlands, can also be used with your

new video recorder.

ꢀ If you want to watch a DVD during timer recording,

press TV/VCR on the remote control to select VCR

mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Press the numbered buttons to enter the recording start

and end times of the programme that you wish to record.

Please note your VCR uses a 24 hour clock. e.g.

1pm will be displayed as 13:00.

Timer recording using On Screen

Display

You may also select the the start and end times by

You may set up to seven timer record events within

one month of the current date.

pressing

DATE

- -

Note

PR-01

- -

19:00~ 20:00

- -: - -~ - -: - -

- -: - -~- - : - -

Before setting the timer make sure that you have set

the VCR clock correctly and you know which stations

you have tuned TV stations on your VCR.

Insert a video cassette with protection tab into your

VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

Press

or to switch VPS/PDC on or off.

to select the recording speed.

Press i/SETUP.

Press or to select REC.

Press

or to select the desired tape speed (SP, IP, or LP).

Press OK/ENTER.

IP mode determines how much tape is left and

switches speed from SP to LP, if necessary, to

complete recording the program. IP mode is not

selected when VPS/PDC is ON.

Press OK/ENTER to start setting the timer record

event.

If all timer record events are full press

or to

select the event that you wish to remove and

replace.

PR-01

- -

DATE

- -

Press to delete the event.

19:00~ 20:00

- -: - -~ - -: - -

- -: - -~- - : - -

DATE

- -

T I M E

- -: - -~ - -: - -

- -: - -~- - : - -

- -

Check that the timer event details are correct.

Press i/SETUP twice.

If PLEASE CHECK is displayed, you have entered

incorrect and will need to re-enter the data.

Press POWER to switch your VCR Standby.

TIMER will appear in the display window while your

VCR waits to make the recording.

Press the numbered buttons to enter the station

that you wish to record.

When selecting stations 1 - 9, press 0 first, then the

channel number; for example Stations 3 - 03. You

may also select Channels by pressing

Notes

Once selected press

ꢀ

If at a later date you wish to delete or change any of the

settings in timer event memory you may do so without

having to enter all the timer event information again.

If you wish to record from AV 3 IN AUDIO (L/R) and

VIDEO on the front or from the EURO SCART

sockets on the back of your unit, press AV to select

for correct display (AV1, AV2 or AV3).

Simply display the timer event screen. Press

select the event that you wish to delete or change.

Press to delete the event...or

FR3

- -

DATE

- -

T I M E

Press OK/ENTER to change; then press

- -: - -~ - -: - -

- -: - -~- - : - -

select; Station, Date, Start and End times and LP.

Press or to enter the correct information.

- -

ꢀ If Timer record events Overlap...

- -

Make sure that the preset times of the timer recording

events do not overlap. If they do, the earlier programme

will always be given priority.

Example:

Press the numbered buttons to enter the date of

the programme.

Programme 1 is programmed to start at 16:00 and end at 17:00.

Programme 2 is programmed to start at 16:30 and end at 17:30.

(In this case, Programme 1 will be recorded in its entirety, but

only the last 30 minutes of Programme 2 will be recorded.)

ꢀ To watch a DVD while performing a timer

recording, press TV/VCR.

If you press OK/ENTER before entering the date

you may select one of the following automated

recording features. Press or to select, then

press OK/ENTER to confirm.

DLY To record every day (except Saturday and

Sunday) at the same time.

Weekly To record at the same time every week.

DATE

- -: - -~ - -: - -

PR-01

- -

- -: - -~ - -: - - SP

- -: - -~- - : - - SP

- -

DLY SU MO TU WE TH FR SA

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Playing a DVD and Video CD

General Features

VCD2.0

VCD1.1

DVD

Playback Setup

Note

Unless stated otherwise, all operations

described use the remote control. Some

features may also be available on the Setup menu.

ꢀ Turn on the TV and select the video input source con-

nected to the DVD player.

ꢀ Audio system: Turn on the audio system

and select the input source connected to the

DVD player.

DVD

Moving to another TITLE

1/3

Press OPEN/CLOSE to open the disc tray.

When a disc has more than one title, you can move to

another title as follows:

Load your chosen disc in the tray, with the label

^ꢀPress DISPLAY when playback is stopped, then

facing up.

When a double-sided DVD is inserted, make sure

the side you want to play is facing up.

press j/l or the appropriate numbered button (0-9)

to select a title number.

Press OPEN/CLOSE to close the tray.

READING appears on the TV screen, and playback

starts automatically. If playback does not start,

press PLAY.

Moving to another CHAPTER/TRACK

1/12

1/3

VCD1.1

DVD

In some cases, the disc menu might appear

instead.

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

ꢀ Press . or > briefly during

playback to select the next chapter/track or to return

to the beginning of the current chapter/track.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD which contains a menu.

^ꢀPress . twice briefly to step back to the previous

chapter/track.

DVD

^ꢀTo go directly to any chapter during DVD playback,

Use the

buttons to select the title/chapter

you want to view, then press OK/ENTER to start play-

press DISPLAY. Then, press

to select C

back.

(chapter) (or for a Video CD, select T for track). Then,

enter the chapter/track number using the numbered

buttons (0-9).

Press TOP/MENU or DISC MENU to return to the menu

screen.

VCD2.0

Note

^ꢀUse the number buttons to select the track you want

to view.

For two-digit numbers, press the buttons in rapid

succession.

Press RETURN to return to the menu screen.

^ꢀMenu setting and the exact operating procedures for

using the menu may differ depending on the disc.

Follow the instructions on the each menu screen.

You also may set PBC to Off under setup. See page

18.

VCD2.0

VCD1.1

DVD

Slow Motion

1 Press . or > during pause.

The player will enter SLOW mode.

2 Use the . or > to select the required speed: t

1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16,

T 1/8, T 1/4 or T 1/2 (forward).

Notes

– If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control”, on page 19).

3 To exit slow motion mode, press PLAY.

Note

Slow motion playback in reverse is not applicable for

Video CD.

– DVDs may have a region code.

– Your player will not play discs that have a region code

different from your player. The region code for this

player is 2 (two).

– To watch a DVD while performing a timer

recording, press TV/VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Video CDs - Repeat Track/All/Off

General Features (continued)

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

Still Picture and Frame-by-frame playback

VCD2.0

VCD1.1

DVD

2 To repeat the disc currently playing, press REPEAT a

second time.

The Repeat All icon appears on the TV screen.

1 Press PAUSE during playback.

The player will now go into PAUSE mode.

2 You can advance the picture frame-by-frame by press-

ing PAUSE repeatedly on the remote control.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

Note

VCD2.0

VCD1.1

DVD

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Repeat function. See page 18.

1 Press and hold . or > for about two seconds

during playback.

The player will now go into SEARCH mode.

2 Press and hold . or > repeatedly to select the

required speed: mX2, mX4, mX16, mX100

(backward) or MX2, MX4, MX16, MX100

(forward).

With a Video CD, the Search speed changes: mX2,

mX4, mX8 (backward) or MX2, MX4, MX8

(forward).

VCD2.0

VCD1.1

DVD

Repeat A-B

OFF

To repeat a sequence in a title:

1 Press A-B at your chosen starting point.

A- appears briefly on the TV screen.

2 Press A-B again at your chosen end point.

A-B appears briefly on the TV screen, and the repeat sequence

begins (a-b repeat appears on the player’s display).

3 To exit SEARCH mode, press PLAY.

3 To cancel the sequence, press A-B.

VCD1.1

Karaoke DVD

Random

1 Press RANDOM during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

0:16:57

- : - - : - -

DVD

Time Search

The Time Search function allows you to start playing at

any chosen time on the disc.

2 To return to normal playback, press RANDOM until

“RANDOM” disappears on the TV screen.

1 Press DISPLAY during playback. The on-screen dis-

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

Tips

By pressing . or > during Random playback, the

unit selects another title (track) and resumes Random

playback.

2 Within 10 seconds, press

to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

Note

This function only works with DVD Karaoke discs and

video CD without PBC.

3 Within 10 seconds, use the number buttons to enter

the required start time. Enter hours, minutes, and sec-

onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

VCD2.0

VCD1.1

DVD

Repeat

CHAPT

TITLE

4 Within 10 seconds, press OK/ENTER to confirm the

start time.

ALL

TRACK

OFF

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

DVD Video Discs - Repeat Chapter/Title/Off

1 To repeat the currently playing chapter, press

REPEAT.

NORM.

3D SUR

DVD

3D Surround

The Repeat Chapter icon appears on the TV screen.

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

1 Press DISPLAY during playback.

2 Press

3 Press

to select “NORM.” or “3D SUR”.

repeatedly until the desired sound is

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features (continued)

DVD

Special DVD Features

VCD2.0

VCD1.1

DVD

Zoom

Checking the contents of DVD Video

discs: Menus

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use the / / / buttons to highlight your

selection, then press OK/ENTER.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six times.

2 Use the

buttons to move through the

zoomed picture.

DVD

Title Menu

3 Press CLEAR to resume normal playback or return to

the paused image.

1 Press TOP/MENU.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

Note

ꢀ The zoom function may not work for some DVDs.

ꢀ The zoom function may not work on multi-angle

scenes.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

3 To remove the title menu, press TOP/MENU again.

VCD2.0

VCD1.1

DVD

Marker Search

DVD

MARKER SEARCH

Disc Menu

1/9

1 Press DISC MENU.

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

The disc menu is displayed.

2 To remove the disc menu, press DISC MENU again.

1 During disc playback, press MARK when

playback reaches the spot that you want to

memorize.

1/1

DVD

Camera Angle

If the disc contains scenes recorded at different camera

angles, you can change to a different camera angle

during playback.

^ꢀPress ANGLE repeatedly during playback to select a

desired angle.

The Marker icon will appear on the TV screen briefly.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

To Recall a Marked Scene

The number of the current angle appears on the display.

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

DVD

Changing the Audio Language

2 Within 10 seconds, press

to select a Marker num-

ENG

ber that you want to recall.

3 Press OK/ENTER.

Press AUDIO repeatedly during playback to hear a dif-

ferent audio language or audio track.

Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press

SEARCH.

ENG

DVD

Subtitles

To clear a Marked Scene

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

2 Press

to select the Marker number that you want

to erase.

Note

appears, the feature is not available on the disc.

3 Press CLEAR.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

5 To remove the MARKER SEARCH menu, press

SEARCH.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3 Discs

Playing an Audio CD and MP3 discs

1 Press and hold . or > for about two seconds

during playback.

The player will now go into SEARCH mode.

The DVD Player can play MP3 formatted recordings on

CD-ROM, CD-R, or CD-RW discs.

Before playing MP3 recordings, read the notes on MP3

Recordings on page 31.

2 Press and hold . or > repeatedly to select the

required speed: mX2, mX4, mX8 (backward) or

MX2, MX4, MX8 (forward).

Insert a disc and close the tray.

The menu appears on the TV screen.

3 Search speed and direction are indicated on the

menu screen.

MP3

Program

TRACK 1.MP3

TRACK 1

TRACK 2.MP3

TRACK 3.MP3

TRACK 4.MP3

TRACK 5.MP3

TRACK 6.MP3

TRACK 7.MP3

TRACK 8.MP3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

4 To exit SEARCH mode, press PLAY.

Clear All

OFF

Clear All

NORM.

Random

56:35

0:56:35

STER.

1 Press RANDOM during playback or when playback is

stopped.

Audio CD menu

MP3 menu

The unit automatically begins Random Playback and

“RAND.” appears on the menu screen.

Press

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display.

Playback will stop at the end of the disc.

to select a track then press PLAY.

2 To return to normal playback, press RANDOM repeat-

edly until “RAND.” disappears on the menu screen.

3 ^{To stop playback at any other time, press STOP.}

Repeat A-B

To repeat a sequence.

1 During disc playback, press A-B at your chosen start-

ing point.

The Repeat icon and “A -” appears on the menu screen.

MP3

Pause

1 Press PAUSE during playback.

2 To return to playback, press PLAY or press PAUSE

again.

2 Press A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

3 To exit the sequence and return to normal play, press

A-B again.

MP3

Moving to another Track

^ꢀPress . or > briefly during playback to go to the

next track or to return to the beginning of the current

track.

The Repeat icon and “OFF” appear on the menu screen.

3D Surround

^ꢀPress . twice briefly to step back to the previous

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

track.

^ꢀIn case of audio CD, to go directly to any track, enter

the track number using the numbered buttons (0-9)

during playback.

1 Press DISPLAY or AUDIO during playback.

MP3

Repeat Track/All/Off

2 Press

3 Press

to select “NORM.” or “3D SUR”.

repeatedly until the desired sound is

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

selected.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat ALL icon appears on the menu screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (STEREO, LEFT, or RIGHT).

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat OFF icon appears on the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

MP3

Programmed Playback

Programmed Playback with Audio CD

and MP3 Discs

Programmed Playback with Video CD

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 18.

Program allows you to store your favorite tracks for a

particular disc in the player memory.

Program can contain 32 tracks (Audio CD) or 60 tracks

(MP3 disc).

Insert Video CD and close the tray.

Insert the disc and close the tray.

Press PROGRAM while playback is stopped.

The VCD Program menu will appear.

The menu is displayed on the TV screen.

Press PROGRAM during playback or in the stop

VCD

Program

mode to enter the Program Edit mode.

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

The

mark will appear to the right of the word Program

on the right side of the menu screen.

Clear All

Note

Press PROGRAM to exit the Program Edit mode; the

mark will disappear.

Note

Press RETURN or PROGRAM to exit the Program menu.

Press

to select a track, then press

OK/ENTER to place the selected track on the

Program list.

Follow steps 3-7 of “Programmed Playback with

Audio CD and MP3 Disc” on left.

Repeat step 3 to place additional tracks on the

Program list.

Repeat Programmed Tracks

Program

MP3

Program

^ꢀTo repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

^ꢀTo repeat all tracks on the program list, press

REPEAT a second time.

The Repeat All icon appears on the menu screen.

^ꢀTo cancel Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the menu screen.

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

TRACK 1.MP3

TRACK 8.MP3

TRACK 2.MP3

TRACK 4.MP3

TRACK 3.MP3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

TRACK 2.MP3

TRACK 3.MP3

TRACK 4.MP3

TRACK 5.MP3

TRACK 6.MP3

TRACK 7.MP3

TRACK 8.MP3

Clear All

NORM.

Clear All

OFF

0:00:14

STER.

56:35

Audio CD menu

MP3 menu

Erasing a Track from Program List

1 Press PROGRAM during playback or in the stop

mode to enter the Program Edit mode.

Press

The programmed track you selected last is highlighted on

the program list.

The

mark will appear.

Press

playing.

to select the track you want to start

2 Press to move to the Program list.

3 Use to select the track that you wish to erase

from the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

Press TOP MENU0 to move to the next page.

Press DISC MENU to move to the previous page.

Press PLAY to start.

Playback begins in the order in which you programmed the

tracks and “PROG.” appears on the display window.

Playback stops after all of the tracks on the Program list

have played once.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2 Use

to select “Clear All”, then press OK/ENTER.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

To resume normal playback from programmed

playback

Press and hold PROGRAM for 3 seconds until “PROG.”

indicator disappears in the display window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation - VCR part

On Screen Display

You may easily display the current time or tape counter,

amount of tape left, day, month, year, day of week,

programme channel, tape speed and operational mode

of your VCR will appear on the TV screen. If a recording

is taking place these On Screen Displays will not be

recorded onto the tape.

Turning on/off the On Screen

Display

Set the OSD off when dubbing a tape to another

tape.

Press i/SETUP.

Press or to select F.OSD ON/OFF, then press

Press CLK/CNT to display.

Press CLK/CNT repeatedly to cycle through the

display options. The tape counter and amount of

tape left will appear if there is a tape loaded.

OK/ENTER.

3 ^Press

or to select ON or OFF.

4 ^{Press i/SETUP to return to the normal screen.}

After 3 seconds the majority of the On Screen

Displays will clear leaving only the clock or tape

counter and the amount of tape left on the screen.

Press CLK/CNT again to remove all displays from

the TV screen.

Tape Counter Memory Stop

The Digital Tape Counter can be displayed on the display

window instead of the time by pressing CLK/CNT on

the remote control. The Digital Tape Counter indicates

the relative positions of recordings on the tape.

Press CLK/CNT.

Press CLEAR to set the counter to 0:00:00.

Press PLAY or start recording.

The tape counter will display the actual play time in

hours, minutes and seconds.

Press STOP when playback or recording is complete.

Press r.

The tape will rewind and automatically stop when

the counter returns to 0:00:00.

Child Lock

The control buttons on the front of the VCR can be

switched off so that your VCR can only be operated

using the remote control.

Press C.LOCK.

will appear in the display window.

None of the buttons on the front of your VCR will

work (except STOP and EJECT).

If any buttons on the front of your unit are pressed

will flicker in the display window for a few sec-

onds.

Press C.LOCK again to switch off the child lock.

will disappear in the display window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation - VCR part

Hi-Fi Stereo Sound System

Your VCR will record and playback Hi-Fi stereo sound.

This allows you to record and playback the sound in

several different ways. Video cassettes recorded on your

VCR will have a normal mono audio track and two VHS

Hi-Fi stereo audio tracks. These stereo tracks allow you

to make audio recordings in Hi-Fi stereo or bilingual

mode from a TV broadcast, stereo audio system, video

disc or another Hi-Fi VCR.

Press D or E repeatedly to select: AUTO, 4:3 or

16:9.

AUTO:

Automatically plays back Wide-Screen

programmes as Wide-Screen and Normal

programmes as normal.

4:3

Only for playing back and recording Normal format

recordings (4:3).

16:9:

Only for playing back and recording Wide-Screen

format recordings (16:9).

Your VCR’s allows you to enjoy broadcasts with

standard stereo, bilingual and mono sound. The

particular type of sound received or that recorded

will be briefly displayed on the TV screen for a

couple of seconds:

A B

Pr-12

SYS-

TIME

SET

REC

ACMS

OSD

AUTO

TEM

^DAT4^E:3

STEREO

16:9

4:3

OSD

16:9 DECO-

DER

16:9

OFF 4:3

OPR

Sound is automatically recorded on the Hi-Fi stereo

and mono tracks of the video tape.

BIL

Both audio channels will be recorded on the Hi-Fi

stereo tracks. The primary language channel (left)

will be recorded on the mono track of the video

tape.

Press i/SETUP to remove the menus from the TV

screen.

To enjoy Wide-Screen playback you must

connect your VCR to the TV using a SCART cable.

MONO

To set the decoder

The sound is recorded on the Hi-Fi tracks and the

We have already described, how to connect a decoder

for pay-TV station as CANAL+ or PREMIERE on page

9. For the recording of an encoded station you do not

have to control anything. You just select the station and

wait shortly until the decoding will start.

mono track of the video tape without any separation.

Press AUDIO repeatedly until the desired audio mode

appears.

The choice is STEREO, LEFT, RIGHT and MONO.

Press i/SETUP.

The main menu will appear on the TV screen.

Press ^For G to select the DECODER.

Press OK/ENTER.

In BIL playback the primary language is output

onthe left channel and the secondary channel is

output simultaneously from the right channel when

audio output is set to STEREO. The primary language

willbe output from both channels when the audio

setting is MONO.

Press D or E to select.

ON: When the decoder is connected to the AV2

socket.

OFF: When another VCR is connected to the AV2

socket.

Press i/SETUP to return to a TV picture.

Please note that when adjusting the tracking control

Hi-Fi stereo sound may revert to MONO.

Wide Screen Compatibility 16:9

Your VCR can record and play back wide screen aspect

ratio programmes (16:9). To record a wide screen format

programme successfully the correct type of wide screen

signal must be broadcast by the TV station.

Switch on your VCR.

Press i/SETUP.

Press ^For G to select 16:9/4:3.

Press OK/ENTER.

A B

Pr-12

TIME

SYS-

TEM

Pr-12

SET

REC

ACMS

SYS-

TEM

OSD

TIME

DATE

SET

REC

ACMS

OSD

16:9

4:3

AUTO

16:9

4:3

OSD

OFF 4:3

OSD

OFF 4:3

4:3

16:9

16:9 DECO-

DER

16:9 DECO-

DER

OPR

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Operation - DVD part

VCD2.0

VCD1.1

Notes on MP3 Discs

DVD

Video Mode Setting

^ꢀWith certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

About MP3

ꢀ

An MP3 file is audio data compressed by using MPEG1,

the audio layer-3 file-coding scheme. We call files that

have the “.mp3” file extension “MP3 files”.

^ꢀThe player can not read an MP3 file that has a file

extension other than “.mp3”.

^ꢀTo change the video mode, press and hold DISPLAY

about 3 seconds during disc playback. The new video

mode number selected is displayed on the TV screen.

Check whether the video quality has improved. If not,

repeat the above procedure until picture quality is

improved.

^ꢀThe player can not read a fake MP3 file that has a

file extension “.mp3”.

MP3 Disc compatibility with this player is

limited as follows:

1. Sampling Frequency / only at 44.1kHz

2. Bit rate/ only 128kbps

^ꢀVideo mode change sequence:

MODE1 → MODE2 → MODE3 → MODE4 →

MODE5 → MODE1

3. CD-R physical format should be “ISO 9660”

4. If you record MP3 files using the software which

cannot create a FILE SYSTEM, for example “Direct-

CD” etc., it is impossible to playback MP3 files. We

therefore recommend that you use “Easy-CD

Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3 files in the first

track. If there is no MP3 file in the 1st track, it cannot

playback MP3 files. If you wish to playback MP3

files, format all the data in the disc or use a new

one.

^ꢀIf you turn off the the power, the video mode will be

back to initial state (MODE1).

6. We do not recommend using CD-RW discs. Please

use finished CD-R discs only.

7. File names should be named using 8 letters or less

and must incorporate the “.mp3” extension

e.g. “********.MP3”.

8. Characters other than uppercase letters (“A” to “Z”),

numerals (“0” to “9”) and underscore (“_”) may not

be displayed, or may be displayed in different char-

acters.

9. Total number of files on the disc should be less than

255.

10. Use 74 minute CD-R discs (650M), do not use 80

minute CD-R (700M) software.

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 files).

Customers should also note that permission is required

in order to download MP3 files and music from the

Internet. Our company has no right to grant such per-

mission. Permission should always be sought from the

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Recording

Copying from DVD To VCR

This unit allows you to copy the contents of a DVD to a

VHS tape.

Recording from another video

recorder

With this video recorder you can make recordings from

an external source, such as copying from another video

recorder or a camcorder.

Note

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “COPY PROTECT-

ED DISC” appears on the TV screen.

Note

In the following description, this video recorder will be

one used for recording and will be referred to as VCR B.

The other appliance will be used for playback and will

be referred to as VCR A.

Insert Disc.

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

VCR A should be connected to the SCART socket

on the rear panel of your unit or the AV 3 IN sock-

ets on the front panel of your unit.

Insert VHS Tape.

Insert a blank VHS video tape into the VCR deck.

Press PLAY on the DVD deck.

Insert the recorded tape into VCR A and a blank

tape into VCR B.

The DVD will go into play mode

ꢀ If the DVD disc menu appears, you may need to press

the PLAY manually to begin copying.

To start recording, press the REC/OTR on VCR B

and PLAY on VCR A.

Press REC/OTR (z) on the VCR deck.

The unit will go into Record mode.

When you want to finish copying, press the STOP

on both video recorders.

Stop the Copy Process.

When the DVD is finished playing, press the VCR

on the remote control and then press STOP (x) to

end the copy.

You must stop the Copy process manually when the

DVD movie ends, or the unit may replay and record

over and over again.

Note

Recording the tape continues, even if you press

PAUSE(X) while copying.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

ꢀ Refer to page 2.

Symptom

ꢀ DVD or VCR button is not switched

DVD or VCR do not

work properly.

properly.

ꢀ Plug the power cord into the wall outlet

securely.

ꢀ The power cord is disconnected.

ꢀ No disc is inserted.

No power.

ꢀ Insert a disc. (Check that the DVD or,

audio CD indicator in the display

window is lit.)

The power is on, but

the DVD player does

not work.

ꢀ Select the appropriate video input mode

on the TV so the picture from the DVD

player appears on the TV screen.

ꢀ The TV is not set to receive DVD signal

output.

No picture.

ꢀ Connect the video cable into the jacks

securely.

ꢀ The video cable is not connected

securely.

No sound.

ꢀ Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD player.

ꢀ The equipment connected with the

audio cable is not set to receive DVD

signal output.

ꢀ Connect the audio cable into the jacks

securely.

ꢀ The audio cables are not connected

securely.

ꢀ Turn on the equipment connected with

the audio cable.

ꢀ The power of the equipment connected

with the audio cable is turned off.

ꢀ Set the Digital Audio Output to the

correct position, then turn on the DVD

player again by pressing POWER.

ꢀ The Digital Audio Output is set to the

wrong position.

The picture is poor.

ꢀ Clean the disc.

ꢀ Check tuning, carry out tuning again.

ꢀ The disc is dirty.

ꢀ The TV channels are not tuned in properly.

ꢀ Insert a playable disc. (Check the disc

type and Regional code.)

ꢀ An unplayable disc is inserted.

The DVD player does

not start playback.

ꢀ Place the disc with the playback side

down.

ꢀ The disc is placed upside down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ Clean the disc.

ꢀ The disc is dirty.

ꢀ Cancel the Rating function or change

the rating level.

ꢀ The Rating level is set.

The remote control

ꢀ Remove the obstacle.

ꢀ There is an obstacle in the path of the

does not work properly.

remote control and this unit.

ꢀ Replace the batteries with new ones.

ꢀ Eject the tape in.

ꢀ The batteries in the remote control are

exhausted.

Video tape cannot be

inserted.

ꢀ Is the cassette compartment empty?

No Hi-Fi sound

ꢀ Select “STEREO” by repeatedly pressing

“AUDIO” on the remote control.

ꢀ Audio mode is not set properly.

Video Head Cleaning

Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken

up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes

might. Clean the video heads with a commercially available video heads cleaning tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 17).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Enter the appropriate code number for the initial setting “Country Code” (See page 19).

Code Country

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Specification

General

Power requirements

Power consumption

Dimensions (approx.)

Mass (approx.)

Operating temperature

Operating humidity

Timer

AC 200-240V, 50 Hz

23W

430 X 97.5 X 360 mm (w/h/d)

5.4 kg

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

24 hours display tape

UHF 22-68 (Adjustable)

RF Modulator

System

Laser

Semiconductor laser, wavelength 650 nm

Double azimuth 4 heads, helical scanning.

PAL

Video Head system

Signal system

Frequency response

DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT connectors only)

Less than 0.008%

More than 100 dB (DVD)

More than 95 dB (CD)

Inputs (VHS)

Audio

-6.0dBm, more than 10 kohms (SCART)

-6.0dBm, more than 47 kohms (RCA)

Video

1.0 Vp-p, 75 ohms, unbalanced (SCART/RCA)

Outputs (DVD)

VIDEO OUT

1 Vp-p 75 ohms, sync negative

Audio output (digital audio)

Audio output (analog audio)

0.5 V (p-p), 75 Ω, RCA jack x 1

2.0 Vrms (1 KHz, 0 dB), 330 Ω, RCA jack (L, R)x1/SCART (TO TV)

Outputs (VHS)

Audio

-6.0dBm, less than 1 kohms (SCART)

1.0Vp-p, 75 ohms, unbalanced (SCART)

Video

Accessory:

Video cable x 1, Audio cable x 1, RF aerial cable x 1, Remote control x 1

^ꢀDesign and specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Aastra Telecom Telephone 2025 User Manual
Actiontec electronic Network Router GT701WG QW04 User Manual
AKG Acoustics Microphone C 414 B ULS User Manual
Alps Electric Switch SKPL Series User Manual
Ativa Calculator AT 30S User Manual
Atmel Answering Machine AT91M55800A User Manual
Axor Paint Sprayer 284466XX1 User Manual
Axor Plumbing Product 10313001 User Manual
Bakers Pride Oven Oven GP 51 User Manual
Behringer Musical Instrument PMH1000 User Manual