TM
TACT Switch
6.45mm Diameter Low contact Resistance with Round Terminals (Radial type)
SKPL Series
Soft feeling, low contact resistance metal contacts and round terminals with excellent PC
board mouting performance.
Features
Detector
Push
●
Soft feeling type with metal contacts achieving low contact
resistance.
●
●
Supplied with radial taping.
Slide
Round terminals are most suitable for radial auto-insertion/mounting
onto the PC board. (reduces switch rise during mounting and also
reduces cutter wear outs caused by the insert machine.)
Better solderability thanks to no rupture plane of the terminal.
Rotary
Encoders
Power
●
Applications
●
●
For car AV equipment and car navigation systems
Dual-in-line
For various operation in audio equipment, communication devices,
measuring instruments, in-car components, etc.
Package Type
Multi Control
Devices
TACT SwitchTM
Product Line
Product No.
Operating Operating Travel Rating Rating Operating life Initial contact
Rubber color
Custom-
Products
force
1.57N
1.96N
2.45N
direction （mm） （max.） （min.） （5mA 5V DC） resistance
SKPLAGD010
SKPLAKD010
SKPLAFD010
Gray
Green
Yellow
50mA
16V DC
10BA
1V DC
Vertical
1.3
100,000cycles
100mΩ max.
Unit:mm
Dimensions
Sharp
Feeling
PC board mounting hole dimensions
（Viewed from switch mounting face）
Style
Soft
Feeling
12.7
Snap-in
Type
ø4.55
Surface
Mount Type
Rubber
dome
Radial
Type
ø6.45
2
1
ø0.5
2-ø0.9 holes
5
5
ø4
12.7
Note
Using a 1.6mm thick PC board is recommended.
Circuit Diagram
1
2
Refer to P.373 for product specifications.
Refer to P.374 for soldering conditions.
Refer to P.376 for taping package specifications.
371
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
TACT Switch
Soldering Conditions
Condition for Reflow
Available for Surface Mount Type.
1. Heating method: Double heating method with infrared heater.
2. Temperature measurement: Thermocouple 0.1 to 0.2φ CA（K）or CC（T）at solder joint（s copper foil surface）. A heat resistive tape
Detector
Push
should be used to fix thermocouple.
3. Temperature profile
Temperature (˚C )
Slide
260˚C max. 3 sec max.
Rotary
Encoders
Power
230˚C
180
150
Time
Dual-in-line
Package Type
120 sec max（. pre-heating ）
40s max.
Multi Control
Devices
3 to 4min.
TACT SwitchTM
Time inside soldering equipment
Custom-
Products
Note
1. The above temperature shall be measured on the mounting surface of a PC board. There are cases where the PC
board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards
and others. The above-stated conditions shall also apply to switch surface temperatures.
2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is
highly recommended.
Sharp
Feeling
Conditions for Auto-dip
Manual Soldering Except SKRT series）
（
Soft
Feeling
Available for Snap-in Type and Radial Type
Items
Condition
（Except SKHJ, SKHL, SKQJ, SKQK, SKEG series）
Snap-in
Type
Soldering temperature
Duration of soldering
350℃max.
3s max.
Items
Flux built-up
Condition
Surface
Mount Type
Mounting surface
should not be exposed to flax
Capacity of soldering iron
60W max.
Radial
Type
Ambient temperature of the soldered
surface of PC board.
Preheating temperature
100℃ max.
Preheating time
60s max.
Soldering temperature
Duration of immersion
Number of soldering
260℃ max.
5s max.
2times max.
Notes
1. Consult with us for TACT SwitchTM washing conditions.
2. Prevent flux penetration from the top side of the TACT SwitchTM.
3. Switch terminals and a PC board should not be coated with flux prior to soldering.
4. The second soldering should be done after the switch returns to normal temperature.
5. Use the flux with a specific gravity of min 0.81.
（EC-19S-8 by TAMURA Corporation, or equivalents.）
374
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
TACT Switch
Specification of Radial Taping Package
Taping Packaging for Auto-insertion
The SKQK, SKQN, SKRC, SKRG, SKPD and SKPL series are delivered with taping packaging.
Box Size
Detector
Push
Slide
Rotary
Encoders
Power
Dual-in-line
Package Type
Multi Control
Devices
TACT SwitchTM
Custom-
Products
Quantity Accommodated Per Box
Qty/ree（l pcs.）
（Minimum
packing unit）
Series
SKQK
SKPD
SKRG
1,000
800
Unit:mm
Sharp
Series
A
B
C
Feeling
Soft
Feeling
SKQK
SKPD
SKQN
47
331
291
2,000
900
Snap-in
Type
SKRGAL to AS
SKRGAA to AF
SKPL
48
43
SKQN
SKRC
235
334
337
Surface
Mount Type
340
370
SKPL
2,700
SKRC
55
Radial
Type
377
Download from Www.Somanuals.com. All Manuals Search And Download.
|