English
Technical Information
Power ratings:
Satellite Speakers:
120V Model - 120V @ 60Hz; 80VA
240V Model - 140V @ 50Hz; 80VA
A patented advanced technology driver featuring a unique heat
transfer system: special high excursion suspension and a
computer-designed anti-resonant cone
Dimensions:
Sub Woofer - 265mm x 190mm x 350mm
Satellites - 68mm x 103mm x 90mm
Inputs:
3 x RCA Phono - Line level
1 x Stereo Mini jack - Line level
Weight:
9 Kg
Outputs:
3 x Speaker terminals
Finishes:
Black sub woofer
Controls:
Textured black satellites with
silver/grey grilles
1 x Volume / Power pot
1 x Bass switch (3 Position)
1 x Centre input switch (2 Position)
White sub woofer
Textured white satellites with
silver/grey grilles
Accessories:
2 x 5 metre Speaker cables
1 x 2 metre Signal input cable
1 x Speaker level to line level
adaptor cable
2 x Wall brackets
Warranty
Your Acoustic Energy loudspeakers are guaranteed against original defects in materials,
manufacture and workmanship for 1 year from the date of purchase.
Please retain all original packaging materials for possible future use.
Under this warranty Acoustic Energy agrees to repair any defect or, at the company’s discretion,
replace the faulty component(s) without charge for parts and labour.
This warranty does not imply any acceptance by Acoustic Energy or its agents for consequential
loss damage and specifically excludes fair wear and tear, accident misuse or unauthorised
modification.
OWNERS
MANUAL
This warranty is applicable in the United Kingdom only and does not in any way limit the
customer’s legal rights. Claims and enquiries under the warranty for AE products purchased
outside the UK should be addressed to the local importers or distributors.
If you have reason to claim under the warranty please contact your dealer in the
first instance.
Designed by KOI Inc (USA) Exclusively for Acoustic Energy Limited (UK)
Manufactured in Malasyia.
Acoustic Energy Limited, 16 Bridge Road, Cirencester, Gloucestershire GL7 1NJ. UK
Tel: +44 (0)1285 654432 Fax: +44 (0)1285 654430
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Aego5
AEGO5 Speaker Placement
As with all loudspeakers, the placement in
Controls
POWER
Subwoofer
relationship to room boundaries (walls etc.) will have
a major effect on their overall performance. As the
Aego Satellites are so small your choice of positions
is far greater and you should use this to maximize
the performance of these remarkable little speakers.
Front Left
Front Right
Existing Decoder
Centre
Front Front Rear
Left Right Left
Rear
Right
Sub Centre
If a speaker is positioned in free air (not close to any
walls etc.) then it will sound brighter. If mounted on
or close to a large object (such as a table or on a
wall) then the mid range will become louder and the
speaker will sound warmer and more powerful.
When set to “AUTO”
the Aego system will
go in to standby mode
if no signal is detected
for a period of time
(10 minutes).
see page 5 for connection
in to AEGOP5 decoder.
It will automatically
switch back on when
a signal is detected.
In most situations we would recommend that the
satellites are mounted on walls at about head height
with the brackets provided to give you a warm
powerful sound that you will find pleasing and
comfortable. However if this is not possible then
Aego Speaker Stands are available from your dealer.
SUB
LEVEL
(Alternative)
Rear Left
(Alternative)
Rear Right
Sub Level
This can be altered to
obtain preferred level
of bass.
Right Speaker
Centre Speaker
Left Speaker
Surface Mounting
Stand Mounting Wall Mounting
AUX.
SUB.
Sub output
This output is available
to supply an auxiliary
subwoofer such as the
“Acoustic Energy
Aegis Compact Sub”.
This may be
SPEAKER OUTPUTS
FRONT
RIGHT
FRONT CENTRE
LEFT
REAR
RIGHT
REAR
LEFT
AUX.
SUB.
SUB
LEVEL
MULTIPIN
INPUT
POWER
recommended when
used in a large room.
*
*
Power
Not supplied
Volume knob
*
This is the main volume
control for all channels.
When used with a
decoder it would
normally be set to
maximum, This enables
the Aego5 system to be
used with DVD players
that have a built in
decoder but no overall
volume control.
Surround Right (SR)
Subwoofer
Surround Left (SL)
Detachable grille
can rotate to suit
speaker orientation.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting AEGOp5
(with 5.1 Theatre System)
Games Consul
VCR
Audio Out
L
CD Player
Laserdisc
DVD Player
Digital Audio Out
L
Audio Out
Optical
Controls
POWER
L
L
Coaxial
R
R
R
R
Phono Jack
Play
Rec
When set to “AUTO”
the Aego system will
go in to standby mode
if no signal is detected
for a period of time
(10 minutes).
Front
Left
Rear
Left
Centre
It will automatically
switch back on when
a signal is detected.
ACOUSTIC ENERGY LIMITED,
16 BRIDGE ROAD, CIRENCESTER,
GLOUCESTERSHIRE GL7 1NJ
Left
WWW.ACOUSTIC-ENERGY.CO.UK
Right
SUB
LEVEL
Front
Right
Rear
Right
Sub
AUX 2
AUX 1
LINE IN
OPTICAL
IN
DIGITAL
IN
POWER
12V DC
MULTIPIN
Developed And Manufactured By Videologic Systems.
AEGOP5 Decoder
Centre Speaker
Right Speaker
Left Speaker
Sub Level
This can be altered to
obtain preferred level
of bass.
AUX.
SUB.
SPEAKER OUTPUTS
Sub output
FRONT
RIGHT
FRONT CENTRE
LEFT
REAR
RIGHT
REAR
LEFT
AUX.
SUB.
This output is available
to supply an auxiliary
subwoofer such as the
“Acoustic Energy
Aegis Compact Sub”.
This may be
SUB
LEVEL
MULTIPIN
INPUT
POWER
Power
recommended when
used in a large room.
Acknowledgments & Trademarks
FCC Compliance Statement
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
All contents are subject to change at any time without
notice. No responsibility is assumed for its use; or for
infringements of patents or other rights of third parties
and no patent or license is implied hereby.
All trademarks are the property of their respective
owners. Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic “ and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. (c)1992 - 1997
Dolby Laboratories, Inc. All rights reserved.
Volume knob
This is the main volume
control for all channels.
When used with a
decoder it would
Surround Right (SR)
Subwoofer
Surround Left (SL)
I Reorient or relocate the receiving antenna.
normally be set to
I Increase the separation between the equipment and receiver.
I Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
maximum, This enables
the Aego5 system to be
used with DVD players
that have a built in
decoder but no overall
volume control.
1. After properly connecting AEGOP5 to your audio sources and amplifier, plug in AEGOP5 ’s AC adapter to an AC outlet.
2. Turn on the power of AEGOP5 by pushing the POWER button on the front panel. Turn on the power of all audio
sources, amplifier, or powered subwoofer.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380,
5,978,762 and other worldwide patents issued and
pending. “DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems, Inc.
All Rights Reserved.
I Consult the dealer or an experienced radio/TV technician for help.
Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Shielded cables and I/O cords must be used for this equipment to comply with
the relevant FCC regulations.
3. Installation is now complete, get ready to experience true Dolby Digital or DTS surround sound.
Note: To prevent damage to speakers, when playing music or a movie, ensure the volume is set low initially.
Gradually turn the volume up to an appropriate level after the playback has started.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
AEGOp5 Decoder
AEGOp5 Remote Control
1
2
3
4
5
6
POWER Button
On/off key
INPUT MODE Button
Select from the 5 different source inputs
Front
Left
Rear
Left
9 6
AEGOP5
TEST Button
Test signal for the 6 discrete channels
Centre
Sub
Front
Right
Rear
Right
MUTE Button
Mute the sound (toggle on and off)
input
power
2
4
1
PRO LOGIC Button
Select from 4 different surround settings
mute
test
3
balance
delay
prologic
DELAY Button
Select the desired channel to engage the time
delay adjustment
AEGOp5 Front Panel
7
5
field
EQ on/off EQ setup
1. The POWER Button
2. LCD Display
3. Speaker Channel LEDs
8
10
Turns AEGOP5 on or off.
Provides you with
information regarding the
system status and settings.
Each LED represents the status of an individual channel. When
a particular channel is active, the LED lights up.
The colour of the LED also indicates the frequency range of
that channel:
7
8
9
BALANCE Button
preset 1 preset 2 preset 3
Set the volume setting for each of the 6 channels
11
13
14
EQ SETUP Button
Select up to 5 EQ Band Settings
save1
preset 4
load
Cen
12
15
* Red means this particular channel has been set to output a wider frequency
range that contains bass signal between 20Hz to 120Hz.
* Green means this particular channel doesn’t contain the bass signal between
20Hz to 120Hz.
EQ ON/OFF Button
Activate the selected EQ Band Setting
BassManager
SL/SR
SW
10 FIELD Button
Select from 6 different sound fields
VOL
D Time
DRC
reset
11 PRESET Button (P1, P2, P3, P4)
18
19
Recall up to 4 different presets
12 SAVE Button
17
16
Store your settings into a selected preset
Front
Left
Rear
Left
Centre
13 LOAD Button
ACOUSTIC ENERGY LIMITED,
16 BRIDGE ROAD, CIRENCESTER,
GLOUCESTERSHIRE GL7 1NJ
Left
Activate your saved setting stored in selected preset
WWW.ACOUSTIC-ENERGY.CO.UK
14 SPEAKER ON/OFF Buttons (CEN, SL/SR, SW)
CEN Button activates/deactivates the centre
channel speaker.
Right
Front
Right
Rear
Right
Sub
AUX 2
AUX 1
LINE IN
OPTICAL
IN
DIGITAL
IN
POWER
12V DC
MULTIPIN
Developed And Manufactured By Videologic Systems.
LS/RS Button simultaneously activates/deactivates
the left and right rear speakers.
SW Button activates/deactivates the subwoofer.
AEGOp5 Rear Panel
15 BASS MANAGER Button
1. MULTIPIN Audio Output:
Switches between three bass configurations
(bass config.1, bass config.2 and bass config.3)
This output feeds 6 channels audio signals to the matching input on a control centre or power amplifier via a multipin (DIN) cable.
16 VOL + and VOL -
2. Main Outputs (Front Left, Front Right, Rear Left, Rear Right, Centre and Sub):
Increase/decrease the volume.
The Six outputs feed audio signals to the matching inputs on a control centre or power amplifier.
17 D TIME Button
3. AUX1 AUX2 and LINE Inputs:
Increase/decrease the delay time.
These inputs accept signals from stereo analog signal sources.
18 DRC Button
Select among 3 different dynamic range
compression ratios.
4. OPTICAL and DIGITAL inputs:
Your AEGOP5 has two types of digital inputs. One S/PDIF (OPTICAL) and one coaxial (DIGITAL) input. Connect the digital outputs of the
sound sources to these inputs.
19 RESET Button
Resets the system to its factory default settings.
5. 12V DC Power Input:
Connect the AEGOP5 power adapter to an AC outlet. Please refer to page 6 to determine the correct voltage in your area.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
AEGOp5 Operation
AEGOp5 Operation
The following pages provide information on the operation of
AEGOP5. The AEGOP5 was purposely designed to be simple to
operate with all functions available from the remote control.
AEGOp5 Operation
AEGOP5 Operation
- Test Mode
AEGOp5 Operation
- Input Selection
- Master Volume Control
Volume Setting
Test Mode
Input Selection
preset 1 preset 2 preset 3
To increase or decrease the master
volume of your AEGOP5, simply press
VOL + or VOL - on the remote control.
After connecting up to your source
and speakers, you can press the
TEST button on the remote to test the
system. You can also use the test
mode to test the location of the
speakers. When the TEST button is
pressed, white noise is generated
through all satellite speakers in an
order of Front Left, Centre, Front
Right, Rear Left, and Rear Right
channels for 2 seconds each. When
completed, the AEGOP5 returns to
Auto Decode mode.
The AEGOP5 can be connected to up
to 5 audio sources. Select the input
source you want by repeatedly
pressing the INPUT Button on the
remote control until the desired
source is selected.
input
power
input
power
save1
preset 4
load
Cen
AEGOp5 Operation
- LCD and LEDs
mute
test
mute
test
BassManager
SL/SR
balance
delay
prologic
balance
delay
prologic
SW
field
EQ on/off EQ setup
field
EQ on/off EQ setup
VOL
D Time
1. Press the power button to turn the AEGOP5 on,
DRC
reset
press it again to turn it off.
preset 1 preset 2 preset 3
preset 1 preset 2 preset 3
Example:
Volume being decreased
by 3 decibels.
save1
preset 4
load
Cen
save1
preset 4
load
Cen
2. When power is turned off but still connected to the mains:
a. LCD display and Speaker Configuration LEDs are off.
b. Decoder status and user configurations are stored.
c. Once the power is turned on again, AEGOP5 will resume
to its previous decoder status and user configurations.
BassManager
SL/SR
BassManager
SL/SR
SW
SW
DOLBY DIGITAL CO
VOLUME -03DB
VOL
D Time
VOL
D Time
DRC
DRC
3. When power is turned off and the unit unplugged from the mains:
a. LCD display and Speaker Configuration LEDs are off.
b. Decoder status and user configurations are not stored.
c. AEGOP5 will reset to factory defaults if the adaptor
is reconnected to the mains.
When test mode is running, the display shows information in a
sequence as below:
In the Digital Mode (Dolby Digital / DTS), you can manually select the
audio input source either in coaxial or optical form depending on the
input type.
AEGOp5 Operation
- Balance Setting
DOLBY DIGITAL CO
TEST L
If “COAXIAL” is selected, the display shows the following information:
Balance Button
AEGOp5 Operation
- LCD Display
You can set the volume setting of each
individual channel.
DOLBY DIGITAL CO
SURROUND
DOLBY DIGITAL CO
TEST C
input
power
mute
test
Auto Decode Mode (Auto detection of input type)
When AEGOP5 is turned on, it automatically detects and identifies the
audio signal coming from source unit.
balance
delay
prologic
To select a channel, press BALANCE
button on the remote control
repeatedly until the desired channel is
reached.
If “Optical” is selected, display of AEGOP5 shows
the following information:
DOLBY DIGITAL CO
TEST R
field
EQ on/off EQ setup
preset 1 preset 2 preset 3
DOLBY DIGITAL OP
SURROUND
save1
preset 4
load
Cen
Playing a DVD title with Dolby Digital (AC3) format,
the display shows the following information.
DOLBY DIGITAL CO
TEST SL
Adjust volume on selected channel by
pressing VOL + or VOL - on the remote
control.
BassManager
SL/SR
In the PCM mode, you can switch between 3 audio input sources
such as CD Player, VCR, game consoles etc. (See page 8 or page 9
for reference). The display shows the following information:
SW
DOLBY DIGITAL CO
SURROUND
DOLBY DIGITAL CO
TEST SR
VOL
D Time
DRC
reset
Example:
Playing a DVD title with DTS format, the display shows
the following information.
PCM
STEREO
LINEIN
Press the BALANCE button once to display
the current balance volume for
channel L (Left).
DTS COAXIAL
SURROUND
PCM
STEREO
AUX1
AEGOp5 Operation
- Mute Mode
DOLBY DIGITAL CO
BALANCE L 0DB
Playing DVD, CD, LD, VCR and games consoles connected to the
analog inputs (LINE, AUX1 and AUX2), the display shows
the following information.
Mute Mode
Pressing MUTE Button on the remote
control will mute all signal outputs
(including the multipin and 6 RCA
connectors.)
PCM
STEREO
AUX2
Press the BALANCE button again to select
the next channel.
input
power
PCM LINEIN
STEREO
DOLBY DIGITAL CO
BALANCE R 0DB
mute
test
balance
delay
prologic
field
EQ on/off EQ setup
Press VOL + or VOL - will increase or
To disable the mute function,
press MUTE Button again.
decrease the balance volume for selected channel.
preset 1 preset 2 preset 3
AEGOp5 Operation - Mode
Selection
save1
preset 4
load
Cen
DOLBY DIGITAL CO
BALANCE R +0DB
BassManager
SL/SR
Surround Processing Modes:
SW
The versatile AEGOP5 surround sound processor is capable of
processing both the digital or analog audio signals from many
different types of audio source. With the equipment connected
correctly, AEGOP5 automatically detects the type of digital signal
present at the digital input.
VOL
D Time
DRC
When MUTE Button is pressed,
the display shows the following information:
DOLBY DIGITAL CO
SURROUND
MUTE
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AEGOp5 Operation
AEGOp5 Operation
Pressing the SL or SR button, switches the surround
channels on and off. The LCD will display the following:
Press the DELAY Button will display the current
delay time for channel LS.
AEGOp5 Operation
- Pro Logic Mode
AEGOp5 Operation
- Delay Calibration
DOLBY DIGITAL CO
SPK SUR ON
DOLBY DIGITAL CO
Pro Logic Mode
DELAY
SL 5 MS
Centre
Subwoofer
Your AEGOP5 will automatically switch to
Pro Logic mode when it detects a Pro Logic
signal. With other types of input signal, you
can select the Dolby Pro Logic mode
manually by pressing Pro Logic button on
the remote. Repeatedly pressing the
Pro Logic Button will switch the Pro Logic
mode in between the following modes;
AUTO, ALL PCM, ENABLE and DISABLE.
Front
Right
Front
Left
input
power
Press the DELAY Button again will circle to next channel.
DOLBY DIGITAL CO
SPK SUR OFF
mute
test
DOLBY DIGITAL CO
balance
delay
prologic
DELAY
SR 5 MS
Pressing the SW button, switches the subwoofer on and off.
The LCD will display the following:
field
EQ on/off EQ setup
Press the D TIME + or D TIME - button will increase or
decrease the delay time for current channel.
preset 1 preset 2 preset 3
DOLBY DIGITAL CO
SPK SW ON
save1
preset 4
load
DOLBY DIGITAL CO
DELAY SR 6 MS
BassManager
SL/SR
Cen
SW
Rear Left
Rear Right
DOLBY DIGITAL CO
SPK SW OFF
Bass Manager
If a Pro Logic signal is detected, AEGOP5 will switch to Pro Logic
mode automatically, and the display shows the following information:
The recommended listening position is described below:
AEGOp5 Operation - Time Delay
Adjustment on Surround
Speakers
Pressing the BASS MANAGER button enables you to select from
three different settings of Bass; Bass Config.1, Bass Config.2 and
Bass Config.3. These selections will feed the bass signal
below 120Hz to different speakers as described below.
I Centre channel speaker should be placed the same distance as the
left and right speakers from your listening position.
DOLBY DIGITAL CO
PROLOGIC AUTO
Delay Calibration
mute
test
If a stereo signal (either analog or digital) is detected, AEGOP5 will
switch to stereo mode automatically. You can then convert the stereo
mode to Pro Logic mode by pressing the Prologic button until you see
the following on the display:
I Rear left and right speakers should be placed behind your listening
position and above ear level.
Press DELAY Button and repeat to
select the length of delay time for
SL/SR/C channels.
balance
delay
prologic
Bass Config.1
field
EQ on/off EQ setup
With this setting, the bass signal below 120Hz will be sent to the
subwoofer; the LEDs on the front panel indicating SW will be red,
and the LCD will show the following:
preset 1 preset 2 preset 3
I If speaker placement is restricted due to the physical environment
of the room, delay calibration is sometimes necessary to achieve
the ideal listening environment.
save1
preset 4
load
Cen
The delay range for SL/SR is 0 to 15 ms
and 0 to 5 ms for centre.
DOLBY DIGITAL CO
PROLOGIC ALL PCM
DOLBY DIGITAL CO
BASS CONFIG.1
BassManager
SL/SR
SW
I If the centre speaker can only be placed nearer to you than the left
and right speakers, sound from the centre speaker will arrive
before the sound from the left and right speakers. The difference in
arrival time could may affect the sound quality and effect. Your
AEGOP5 allows you to adjust the speaker time delay to compensate
for this problem by increasing the delay time for the centre channel.
Thus sound from the centre, left and right speakers will reach you
at the same time. If your centre speaker is closer to your listening
position than the left and right speakers, press DELAY button
repeatedly until the centre channel is selected. To increase or
decrease the delay time, press D TIME + or D TIME - until the
desired delay is selected. The same procedure can be applied to
adjust the delay time of rear surround speakers if necessary.
Adjust the delay time on selected
channel by pressing D TIME + or
D TIME - on the remote control.
DOLBY DIGITAL CO
PROLOGIC ENABLE
VOL
D Time
Bass Config.2
DRC
reset
With this setting, the bass signal below 120Hz will be sent to front left
and right speakers and the subwoofer; the LEDs on the front panel
indicating L/R/SW will be red, and the LCD will show the following
information:
If you want to convert Pro Logic or 2-channel Dolby Digital signal into
Stereo mode, you can press the Prologic button until you see the
following on the display:
Surround Speaker Delay
Delay calibration for the rear surround
speakers may be necessary if the surround speakers are placed quite
close to your listening position. To correct the delay this may cause,
press the DELAY button repeatedly until SL or SR appear on the
display. Increase the time delay of the surround speakers by pressing
D TIME + until you are able to hear a 3D sound effect coming from
surround speakers.
DOLBY DIGITAL CO
BASS CONFIG.2
DOLBY DIGITAL CO
PROLOGIC DISABLE
Bass Config.3
With this setting, the bass signal below 120Hz will be sent to all the
speakers; the LEDs on the front panel indicating L/R/SL/SR/SW
channels will be red and the LCD will show the following information:
AEGOp5 Operation - Speaker
Mode with Bass Manager
Press DELAY Button again to move to the next channel.
DOLBY DIGITAL CO
BASS CONFIG.3
Speaker Mode with Bass Manager
field
EQ on/off EQ setup
DOLBY DIGITAL CO
The six LEDs on front panel of your AEGOP5
represent the six discrete audio channels
(Left, Right, Centre, Rear Left, Rear Right
and Sub). If a particular channel is active,
the LED will light up in green. The LED will
be red if that particular channel carries
bass signal below 120Hz.
DELAY
SL 5 MS
AEGOp5 Operation - Time Delay
Adjustment on Centre Channel
Speaker
preset 1 preset 2 preset 3
Bass Config. Off
save1
preset 4
load
Cen
With this setting, the bass signal below 120Hz will be sent to all
the speakers; the LEDs on front panel of AEGOP5 indicating
L/R/C/SL/SR/SW channels will be red and the LCD will show the
following information:.
DOLBY DIGITAL CO
DELAY SR 5 MS
BassManager
SL/SR
Delay Calibration
mute
test
SW
Press D TIME + or D TIME - to increase or decrease
the delay time for the selected channel.
Press the DELAY button and repeat to
select the length of delay time for the
Rear Left (SL), Rear Right (SR) and
Centre(C) channels.
balance
delay
prologic
VOL
D Time
DRC
reset
DOLBY DIGITAL CO
BASS CONFIG.OFF
field
EQ on/off EQ setup
DOLBY DIGITAL CO
DELAY SR 6 MS
preset 1 preset 2 preset 3
Speaker Mode
Pressing the CEN button, switches the
centre channel on and off. The LCD will
display the following:
save1
preset 4
load
Cen
The delay range for SL/SR is 0 to 15
ms and 0 to 5 ms for centre.
BassManager
SL/SR
SW
DOLBY DIGITAL CO
VOL
D Time
DRC
reset
Adjust the delay time for the selected
channel by pressing D TIME + or D
TIME - on the remote control.
SPK C
ON
DOLBY DIGITAL CO
SPK C OFF
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AEGOp5 Operation
AEGOp5 Operation
Press the EQ SETUP button to display the current
setting of EQ Band 1.
AEGOp5 Operation
- Saving Presets
AEGOp5 Operation
- Resetting
AEGOp5 Operation
- Sound Field Processing
DOLBY DIGITAL CO
EQ BAND 1 0DB
save1
preset 4
load
Cen
Setting Presets
Resetting
DSP Sound Field
Your AEGOP5 is equipped with a sound
field processor that gives you six
different field effects; Disable, Hall,
Theater, Stadium, Club, and Church. By
pressing Field button on the remote,
you can select any of these effects. You
can also increase or decrease the
Reverb value from 0 - 9 by pressing
VOL + or VOL - on the remote control
whilst you are selecting the field effect.
The AEGOP5 enables you to customise
up to 4 settings. This function enables
you to save and load your favourite
settings at any time.
Your AEGOP5 can be reset to its factory
default settings by pressing RESET button
on the remote.
BassManager
SL/SR
input
power
input
power
Press the EQ SETUP button again to select next EQ Band.
SW
mute
test
mute
test
DOLBY DIGITAL CO
EQ BAND 2 0DB
VOL
D Time
DRC
reset
balance
delay
prologic
balance
delay
prologic
field
EQ on/off EQ setup
field
EQ on/off EQ setup
Press the Vol+ or Vol- button to increase or decrease
the volume for current EQ Band.
Saving a Preset:
Press the PRESET 1 button, the display
will show the following:
preset 1 preset 2 preset 3
preset 1 preset 2 preset 3
Press the RESET button to reset the
AEGOP5 to its factory default settings.
save1
preset 4
load
Cen
save1
preset 4
load
Cen
DOLBY DIGITAL CO
EQ BAND 2 +01DB
BassManager
SL/SR
BassManager
SL/SR
DOLBY DIGITAL CO
PRESET 1
DOLBY DIGITAL CO
RESET TO FACTORY
SW
SW
Press EQ SETUP button to store the new EQ setting.
VOL
D Time
VOL
D Time
DRC
Press the SAVE button to save all the
current decoder settings into Preset 1.
When completed, your AEGOP5 reverts
to Auto Decode mode.
Press the Field button and repeat to
change the current setting of Sound Field mode.
Press EQ ON/OFF button to switch the new EQ settings on or off.
DOLBY DIGITAL CO
PRESET 1 SAVING
DOLBY DIGITAL CO
SURROUND
DOLBY DIGITAL CO
DIABLE REVERB 0
DOLBY DIGITAL CO
PRESET 1 SAVED
DOLBY DIGITAL CO
AEGOp5 Operation - DRC
(Dynamic Range Compression)
HALL
REVERB 3
When complete, your AEGOP5 will revert back to Auto Decode mode.
DRC
DOLBY DIGITAL CO
THEATRE REVERB 3
Your AEGOP5 features Dynamic Range
DOLBY DIGITAL CO
input
power
Compression (DRC), its sophisticated
technology creates realistic sound fields
with richly detailed sound that is
remarkably free from distortion.
Repeatedly pressing DRC button will
switch between 3 modes:
mute
test
DOLBY DIGITAL CO
STADIUM REVERB 3
balance
delay
prologic
field
EQ on/off EQ setup
DOLBY DIGITAL CO
preset 1 preset 2 preset 3
AEGOp5 Operation
- Loading Preset
CLUB
REVERB 3
save1
preset 4
load
Cen
“NO” No compression is applied to the
original audio signal, this provides the
greatest dynamic range.
BassManager
SL/SR
Loading a Preset
You can load a previously saved preset
by pressing LOAD button on the
remote.
DOLBY DIGITAL CO
CHURCH REVERB 3
SW
input
power
VOL
D Time
DRC
reset
mute
test
“HALF” Partial compression is applied, this
function is useful if AEGOP5 is connected
to an external amplifier.
balance
delay
prologic
Loading a Preset:
AEGOp5 Operation
- Equalization
field
EQ on/off EQ setup
Press any of the 4 preset buttons,
(PRESET 1, PRESET 2, PRESET 3 or
PRESET 4), the display will show
the following:
preset 1 preset 2 preset 3
“FULL” Full compression is applied, this function is useful
if AEGOP5 is connected to an external amplifier.
save1
preset 4
load
Cen
5-Band Equalization
Your AEGOP5 features a 5-band equalizer
which enables you to fine tune the sound
of your favourite movie or music. Press
EQ SETUP button on the remote to
activate it. Repeatedly pressing EQ SETUP
button will switch between the 5 bands.
BassManager
SL/SR
input
power
DOLBY DIGITAL CO
PRESET 1
SW
Press the DRC button to display the current setting of Dynamic
Range Compression mode.
mute
test
VOL
D Time
DRC
balance
delay
prologic
Press LOAD button to load the preset.
DOLBY DIGITAL CO
field
EQ on/off EQ setup
DYNAMIC
NO
DOLBY DIGITAL CO
PRESET 1 LOADING
preset 1 preset 2 preset 3
Press the DRC button again to switch between the DRC modes.
save1
preset 4
load
Cen
Each band of the equalizer enables you to
adjust your desired volume to a maximum
of 10dB. Press VOL + or VOL - on the
remote control to adjust the volume.
DOLBY DIGITAL CO
BassManager
SL/SR
DOLBY DIGITAL CO
PRESET 1 LOADED
DYNAMIC
FULL
SW
VOL
D Time
DRC
reset
When preset loading is complete, your AEGOP5 will revert back to
Auto Decode mode.
DOLBY DIGITAL CO
DYNAMIC HALF
After setting the desired volume for each
EQ band, you
DOLBY DIGITAL CO
press EQ SETUP button again to store the
new setting for that band.
Press EQ ON/OFF button to switch the new EQ settings on or off.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|