Acer Projector X1161 User Manual

Acer Projector  
X1161/X1161A/X1161N/X1261  
Series  
User's Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Information for your safety and  
comfort  
Read these instructions carefully. Keep this document for future reference.  
Follow all warnings and instructions marked on the product.  
Turning the product off before cleaning  
Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
Caution for plug as disconnecting device  
Observe the following guidelines when connecting and disconnecting power to  
the external power supply unit:  
Install the power supply unit before connecting the power cord to the AC  
power outlet.  
Unplug the power cord before removing the power supply unit from the  
projector.  
If the system has multiple sources of power, disconnect power from the  
system by unplugging all power cords from the power supplies.  
Caution for Accessibility  
Be sure that the power outlet you plug the power cord into is easily accessible  
and located as close to the equipment operator as possible. When you need to  
disconnect power to the equipment, be sure to unplug the power cord from the  
electrical outlet.  
Warnings!  
Do not use this product near water.  
Do not place this product on an unstable cart, stand or table. If the product  
falls, it could be seriously damaged.  
Slots and openings are provided for ventilation to ensure reliable  
operation of the product and to protect it from overheating. These  
openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug or other similar surface.  
This product should never be placed near or over a radiator or heat register, or  
in a built-in installation unless proper ventilation is provided.  
Never push objects of any kind into this product through cabinet slots as  
they may touch dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any kind onto or into  
the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
iv  
To avoid damage of internal components and to prevent battery leakage,  
do not place the product on a vibrating surface.  
Never use it under sporting, exercising, or any vibrating environment  
which will probably cause unexpected short current or damage rotor  
devices, lamp.  
Using electrical power  
This product should be operated from the type of power indicated on the  
marking label. If you are not sure of the type of power available, consult  
your dealer or local power company.  
Do not allow anything to rest on the power cord. Do not locate this  
product where people will walk on the cord.  
If an extension cord is used with this product, make sure that the total  
ampere rating of the equipment plugged into the extension cord does not  
exceed the extension cord ampere rating. Also, make sure that the total  
rating of all products plugged into the wall outlet does not exceed the fuse  
rating.  
Do not overload a power outlet, strip or receptacle by plugging in too  
many devices. The overall system load must not exceed 80% of the branch  
circuit rating. If power strips are used, the load should not exceed 80% of  
the power strip's input rating.  
This product's AC adapter is equipped with a three-wire grounded plug.  
The plug only fits in a grounded power outlet. Make sure the power outlet  
is properly grounded before inserting the AC adapter plug. Do not insert  
the plug into a non-grounded power outlet. Contact your electrician for  
details.  
Warning! The grounding pin is a safety feature. Using a power outlet that is  
not properly grounded may result in electric shock and/or injury.  
Note: The grounding pin also provides good protection from unexpected  
noise produced by other nearby electrical devices that may interfere with  
the performance of this product.  
Use the product only with the supplied power supply cord set. If you need  
to replace the power cord set, make sure that the new power cord meets  
the following requirements: detachable type, UL listed/CSA certified, type  
SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters  
(15 feet) maximum length.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
Product servicing  
Do not attempt to service this product yourself, as opening or removing covers  
may expose you to dangerous voltage points or other risks. Refer all servicing to  
qualified service personnel.  
Unplug this product from the wall outlet and refer servicing to qualified service  
personnel when:  
the power cord or plug is damaged, cut or frayed  
liquid was spilled into the product  
the product was exposed to rain or water  
the product has been dropped or the case has been damaged  
the product exhibits a distinct change in performance, indicating a need  
for service  
the product does not operate normally after following the operating  
instructions  
Note: Adjust only those controls that are covered by the operating  
instructions, since improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician to  
restore the product to normal condition.  
Warning! For safety reasons, do not use non-compliant parts when adding  
or changing components. Consult your reseller for purchase options.  
Your device and its enhancements may contain small parts. Keep them out of  
the reach of small children.  
Additional safety information  
Do not look into the projector's lens when the lamp is on. The bright may  
hurt your eyes.  
Turn on the projector first and then signal sources  
Do not place the product in following environments:  
Space that is poorly ventilated or confined. At least 50cm clearance from walls  
and free flow of air around the projector is necessary.  
Locations where temperatures may become excessively high, such as inside of a  
car with all windows rolled up.  
Locations where excessive humidity, dust, or cigarette smoke may contaminate  
optical components, shortening the life span and darkening the image.  
Locations near fire alarms.  
Locations with an ambient temperature above 40 ºC/104 ºF.  
Locations where the altitudes are higher than 10000 feet.  
Unplug immediately if there is something wrong with your projector. Do  
not operate if smoke, strange noise or odor comes out of your projector. It  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
might cause fire or electric shock. In this case, unplug immediately and  
contact your dealer.  
Do not keep using this product to break or drop it. In this case contact your  
dealer for inspection.  
Do not face the projector lens to the sun. It can lead to fire.  
When switching the projector off, sugges to ensure the projector  
completes its cooling cycle before disconnecting power.  
Do not turn off the main power abruptly or unplug the projector during  
operation. It can lead to lamp breakage, fire, electric shock or other  
trouble. The best way is to wait for the fan to turn off before turning main  
power off.  
Do not touch air outlet grille and bottom plate which becomes hot.  
Clean the air filter frequently if have. The temperature inside may rise and  
cause damage when the filter/ventilation slots clogged with dirt or dust.  
Do not look into the air outlet grille when projector is operating. It may  
hurt your eyes.  
Always open the lens shutter or remove the lens cap when the projector is  
on.  
Do not block the projector lens with any object when the projector is  
under operation as this could cause the object to become heated and  
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE  
on the remote control.  
The lamp becomes extremely hot during operation. Allow the projector to  
cool for approximately 45 minutes prior to removing the lamp assembly for  
replacement.  
Do not operate lamps beyond the rated lamp life. It could cause it to break  
on rare occasions.  
Never replace the lamp assembly or any electronic components unless the  
projector is unplugged.  
The product will detect the life of the lamp itself. Please be sure to change  
the lamp when is showing warning message.  
When changing the lamp, please allow unit to cool down, and follow all  
changing instructions.  
Reset the "Lamp Hour Reset" function from the Onscreen display  
"Management" menu after replacing the lamp module.  
Do not attempt to disassemble this projector. There are dangerous high  
voltages inside which may hurt you. The only user serviceable part is the  
lamp which has its own removable cover. Refer servicing only to suitable  
qualified professional service personnel.  
Do not stand the projector on end vertically. It may cause the projector to  
fall over, causing injury or damage.  
This product is capable of displaying inverted images for ceiling mount  
installation. Only use acer ceiling mount kit for mounting the projector  
and ensure it is securely installed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
Operating environment for using wireless function  
(Optional)  
Warning! For safety reasons, turn off all wireless or radio transmitting  
devices when using your machine under the following conditions. These  
devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth  
and/or 3G.  
Remember to follow any special regulations in force in any area, and always  
switch off your device when its use is prohibited or when it may cause  
interference or danger. Use the device only in its normal operating positions.  
This device meets RF exposure guidelines when used normally, and it and its  
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your  
body. It should not contain metal and you should position the device the above-  
stated distance from your body.  
To successfully transmit data files or messages, this device requires a good  
quality connection to the network. In some cases, transmission of data files or  
messages may be delayed until such a connection is available.  
Ensure that the above separation distance instructions are followed until the  
transmission is completed.  
Parts of the device are magnetic. Metallic materials may be attracted to the  
device, and persons with hearing aids should not hold the device to the ear with  
the hearing aid. Do not place credit cards or other magnetic storage media near  
the device, because information stored on them may be erased.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may  
interfere with the functionality of inadequately protected medical devices.  
Consult a physician or the manufacturer of the medical device to determine if  
they are adequately shielded from external RF energy or if you have any  
questions. Switch off your device in health care facilities when any regulations  
posted in these areas instruct you to do so. Hospitals or health care facilities  
may be using equipment that could be sensitive to external RF transmissions.  
Pacemakers. Pacemaker manufacturers recommend that a minimum separation  
of 15.3 centimeters (6 inches) be maintained between wireless devices and a  
pacemaker to avoid potential interference with the pacemaker. These  
recommendations are consistent with the independent research by and  
recommendations of Wireless Technology Research. Persons with pacemakers  
should do the following:  
Always keep the device more than 15.3 centimeters (6 inches) from the  
pacemaker.  
Not carry the device near your pacemaker when the device is switched on.  
If you suspect interference, switch off your device, and move it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii  
Hearing aids. Some digital wireless devices may interfere with some hearing  
aids. If interference occurs, consult your service provider.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles such as electronic fuel injection systems, electronic  
antiskid (antilock) braking systems, electronic speed control systems, and air bag  
systems. For more information, check with the manufacturer, or its  
representative, of your vehicle or any equipment that has been added. Only  
qualified personnel should service the device, or install the device in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any  
warranty that may apply to the device. Check regularly that all wireless  
equipment in your vehicle is mounted and operating properly. Do not store or  
carry flammable liquids, gases, or explosive materials in the same compartment  
as the device, its parts, or enhancements. For vehicles equipped with an air bag,  
remember that air bags inflate with great force. Do not place objects, including  
installed or portable wireless equipment in the area over the air bag or in the  
air bag deployment area. If in-vehicle wireless equipment is improperly  
installed, and the air bag inflates, serious injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device  
before boarding an aircraft. The use of wireless teledevices in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the wireless telephone  
network, and may be illegal.  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Potentially explosive  
atmospheres include areas where you would normally be advised to turn off  
your vehicle engine. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death. Switch off the device at refueling points  
such as near gas pumps at service stations. Observe restrictions on the use of  
radio equipment in fuel depots, storage, and distribution areas; chemical plants;  
or where blasting operations are in progress. Areas with a potentially explosive  
atmosphere are often, but not always, clearly marked. They include below deck  
on boats, chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), and areas where the air contains  
chemicals or particles such as grain, dust or metal powders.  
Caution for Listening  
To protect your hearing, follow these instructions.  
Increase the volume gradually until you can hear clearly and comfortably.  
Do not increase the volume level after your ears have adjusted.  
Do not listen to music at high volumes for extended periods.  
Do not increase the volume to block out noisy surroundings.  
Decrease the volume if you can't hear people speaking near you.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
Disposal instructions  
Do not throw this electronic device into the trash when discarding. To minimize  
pollution and ensure utmost protection of the global environment, please  
recycle. For more information on the Waste from Electrical and Electronics  
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/  
Sustainability/sustainability01.htm  
Mercury advisory  
For projectors or electronic products containing an LCD/CRT monitor or display:  
“Lamp(s) contain Mercury,  
Dispose Properly.”  
Lamp(s) inside this product contain mercury and must be recycled or disposed of  
according to local, state or federal laws. For more information, contact the  
information, check www.lamprecycle.org  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
First thing first  
Usage Notes  
Do:  
Turn off the product before cleaning.  
Use a soft cloth moistened with mild detergent to clean the display  
housing.  
Disconnect the power plug from AC outlet if the product is not being used  
for a long period of time.  
Don't:  
Block the slots and openings on the unit provided for ventilation.  
Use abrasive cleaners, waxes or solvents to clean the unit.  
Use under the following conditions:  
In extremely hot, cold or humid environments.  
In areas susceptible to excessive dust and dirt.  
Near any appliance that generates a strong magnetic field.  
Place In direct sunlight.  
Precautions  
Follow all warnings, precautions and maintenance as recommended in this  
user's guide to maximize the life of your unit.  
Warning:  
Do not look into the projector's lens when the lamp is on. The bright light may hurt  
your eyes.  
To reduce the risk of fire or electric shock, do not expose this product to rain or  
moisture.  
Please do not open or disassemble the product as this may cause electric shock.  
When changing the lamp, please allow unit to cool down, and follow all changing  
instructions.  
This product will detect the life of the lamp itself. Please be sure to change the lamp  
when it shows warning messages.  
Reset the "Lamp Hour Reset" function from the Onscreen display "Management"  
menu after replacing the lamp module.  
When switching the projector off, please ensure the projector completes its cooling  
cycle before disconnecting power.  
Turn on the projector first and then the signal sources.  
Do not use lens cap when projector is in operation.  
When the lamp reaches the end of its life, it will burn out and may make a loud  
popping sound. If this happens, the projector will not turn back on until the lamp  
module has been replaced. To replace the lamp, follow the procedures listed under  
"Replacing the Lamp".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1
Introduction  
Product Features  
This product is a single-chip DLP® projector. Outstanding features include:  
DLP® technology  
X1161/X1161A/X1161N series: Native 800 x 600 SVGA resolution  
X1261 series : Native 1024 x 768 XGA resolution  
4:3 / 16:9 aspect ratio supported  
Acer ColorBoost technology delivers nature's true colors for vivid, life-like  
images  
High brightness and contrast ratio  
Versatile display modes (Standard, Video, Bright, Picture, Game, User) for  
optimum performance in any situation  
NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported  
Lower power consumption and economy (ECO) mode extends lamp life  
Acer EcoProjeciton Technology delivers Intelligent power management  
approach and physical efficiency improvement.  
Empowering Key reveals Acer Empowering Technology utilities (Acer  
eView, eTimer, ePower Management) for easy adjustment of settings  
Advanced digital keystone correction optimizes presentations  
Multi-language onscreen display (OSD) menus  
Manual focus projection lens zooms up to 1.1X  
2X digital zoom and pan move function  
Microsoft® Windows® 2000, XP, Vista®, Macintosh® OS compliant  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2
Package Overview  
This projector comes with all the items shown below. Check to make sure your  
unit is complete. Contact your dealer immediately if any thing is missing.  
Projector with lens cap  
Power cord  
VGA cable  
XXXXXX  
3V  
Composite video cable  
(X1161/X1261 series)  
Battery  
Security card  
Acer Projector  
Quick Start Guide  
User’s guide  
Remote control  
Quick start guide  
Carrying case  
(X1161/X1161N/X1261  
series)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Projector Overview  
Projector Outlook  
Front / upper side  
1
7
8
2
3
9
3
4
1
10  
5
6
#
Description  
#
Description  
1
Ventilation (inlet)  
6
Lens cap  
2
3
4
5
Ventilation (outlet)  
Remote control receivers  
Focus ring  
7
8
9
Power button  
Remote control  
Zoom lever  
Zoom lens  
10 Horn  
Rear side  
7*  
10  
6*  
3
4
5
7
8
9
1
10*  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4
#
Description  
#
Description  
X1161N Series:  
X1261 Series:  
1
2
3
Power socket  
KensingtonTM lock port  
1
2
Power socket  
KensingtonTM lock port  
PC analog signal/HDTV/component  
video input connector (VGA IN 1 or  
VGA IN)  
PC analog signal input connector (VGA  
In 1 or VGA In)  
3
10 USB connector  
X1161/X1161A only:  
4
5
S-Video input connector  
Composite video input connector  
PC analog signal/HDTV/component vid-  
eo input connector (VGA IN 2)  
1
2
Power socket  
6*  
7
KensingtonTM lock port  
RS232 connector  
PC analog signal/HDTV/component  
video input connector (VGA IN 1 or  
VGA IN)  
Monitor loop-through output  
connector (VGA-Out)  
3
8
9
4
5
S-Video input connector  
Audio input connector  
Composite video input connector  
10* USB connector  
7* RS232 connector  
10 USB connector  
Note: "*" Optional.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Remote Control and Control Panel Layout  
2
1
8
3
9
8
4
5
6
10  
11  
7
2
12  
13  
#
Icon  
Function  
Description  
1
Remote control Receives signals from remote control.  
receiver  
2
3
POWER  
Refer to the "Turning the Projector On/Off" section.  
MENU  
Press "MENU" to launch the Onscreen display (OSD)  
menu, back to the previous step for the OSD menu  
operation or exit the OSD menu.  
Confirm your selection of items.  
4
5
6
7
KeyPad 0~9  
ASPECT RATIO  
RESYNC  
Press "0~9" to input a password in the "Security".  
To choose the desired aspect ratio (Auto/4:3/16:9).  
Automatically synchronizes the projector to the input source.  
To pause the screen image.  
FREEZE  
8
KEYSTONE  
Adjusts the image to compensate for distortion caused by  
tilting the projector (± 40 degrees).  
9
Four directional Use up, down, left, right buttons to select items or make  
select keys  
adjustments to your selection.  
Zooms the projector display in or out.  
Changes the active source.  
10  
11  
12  
ZOOM  
SOURCE  
HIDE  
Momentarily turns off the video. Press "HIDE" to hide the  
image, press again to display the image.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
#
Icon  
Function  
Description  
13  
Empowering  
key  
Unique Acer functions: eView, eTimer, ePower Management.  
Note:  
Remote Control Placement  
Please refer to the illustration to attach the remote control to the projector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Getting Started  
Connecting the Projector  
VGA  
RS232  
RS232  
USB  
USB  
D-Sub  
D-Sub  
4
8
8
2
4
2
6
D-Sub  
D-Sub  
X1161 series  
Y
3
1
5
7
Y
S-Video output  
Video output  
#
Description  
#
Description  
X1161N series:  
X1261 series:  
1
2
8
Power cord  
VGA cable  
USB cable  
1
2
3
4
5
Power cord  
VGA cable  
Composite video cable  
RS232 cable  
X1161/X1161A series:  
1
2
Power cord  
VGA cable  
S-Video cable  
*
*
*
Audio cable jack/jack  
6
7
8
3
5
8
4
Composite video cable  
S-Video cable  
Audio cable jack/RCA  
USB cable  
USB cable  
*
RS232 cable  
Note: To ensure the projector works well with your computer,  
please make sure the timing of the display mode is compatible  
with the projector.  
Note: "*" Optional.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
8
Turning the Projector On/Off  
Turning on the Projector  
1
2
Remove the lens cap.(Illustration #1)  
Ensure that the power cord and signal cable are securely connected. The  
Power indicator LED will flash red.  
3
4
Turn on the projector by pressing "Power" button on the control panel,  
and the Power indicator LED will turn blue. (Illustration #2)  
Turn on your source (computer, notebook, video player ,etc.). The  
projector will detect your source automatically.  
If the screen displays "Lock" and "Source" icons, it means the  
projector is locked onto a specific source type and there is no such  
type of input signal detected.  
If the screen displays "No Signal", please make sure the signal cables  
are securely connected.  
If you connect to multiple sources at the same time, use the "Source"  
button on the remote control to switch between inputs.  
2
Power button  
1
Lens cap  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9
Turning off the Projector  
1
To turn off the projector, press the "Power" button twice. The message  
below will display onscreen for 5 seconds.  
"Please press power button again to complete the shutdown process."  
Immediately after powering off, the Power indicator LED will flash RED  
2
rapidly and the fan(s) will continue to operate for about 120 seconds. This  
is to ensure that the system cools correctly.  
3
4
Once the system has finished cooling, the Power indicator LED will turn  
solid RED which means projector enter standby mode.  
It is now safe to unplug the power cord.  
Warning: Do not turn on the projector immediately after  
powering off.  
Note: If you wish to turn the projector back on, you must wait for  
60 seconds at least to press the "Power" button to restart the  
projector.  
Warning indicators:  
If the projector automatically shuts down and the Power indicator  
quick flashing RED and steady BLUE by returns, please contact your  
local reseller or service center.  
If the projector automatically shuts down and the Power indicator  
quick flashing RED and steady BLUE by returns, this indicates that the  
projector has overheated. The message below will display onscreen if  
this is about to happen:  
"Projector Overheated. Lamp will automatically turn off soon."  
If the Power indicator quick flashing RED and steady BLUE by returns  
and the message below is displayed onscreen, please contact your  
local dealer or service center:  
"Fan fail. Lamp will automatically turn off soon."  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Adjusting the Projected Image  
Adjusting the Height of Projected Image  
The projector is equipped with elevator feet for adjusting the height of image.  
To raise/lower the image:  
1
Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle.  
1
Tilt adjusting wheel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
11  
How to optimize image size and distance  
Consult the table below to find the optimal image sizes achievable when the  
projector is positioned at a desired distance from the screen. Example: If the  
projector is 3 m from the screen, good image quality is possible for image sizes  
between 69" and 76".  
Note: Remind as below figure, the space of 133 cm height is  
required when located at 3m distance.  
Max screen size  
Min screen size  
76"  
B
69"  
9"  
Height: 133cm  
Form base to  
top of image  
Height:  
120cm  
C
A
3m  
Desired Distance  
Figure: Fixed distance with different zoom and screen size.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
12  
Screen size  
(Min zoom)  
Screen size  
(Max zoom)  
Top  
Top  
Desired  
Distance  
(m)  
From base to  
top of image  
(cm) <C>  
From base to top  
of image (cm)  
<C>  
Diagonal  
(inch)  
<B>  
Diagonal  
(inch)  
<B>  
W (cm) x  
H (cm)  
W (cm) x  
H (cm)  
<A>  
1.5  
2
34  
46  
70 x 52  
60  
38  
50  
77 x 58  
66  
93 x 70  
80  
103 x 77  
88  
2.5  
3
57  
116 x 87  
100  
120  
140  
160  
181  
201  
241  
281  
321  
361  
401  
441  
481  
63  
128 x 96  
111  
133  
155  
177  
199  
221  
265  
310  
354  
398  
442  
487  
531  
69  
140 x 105  
163 x 122  
186 x 140  
209 x 157  
233 x 174  
279 x 209  
326 x 244  
372 x 279  
419 x 314  
465 x 349  
512 x 384  
558 x 419  
76  
154 x 115  
179 x 135  
205 x 154  
231 x 173  
256 x 192  
308 x 231  
359 x 269  
410 x 308  
462 x 346  
513 x 385  
564 x 423  
615 x 462  
3.5  
4
80  
88  
92  
101  
114  
126  
151  
177  
202  
227  
252  
278  
303  
4.5  
5
103  
114  
137  
160  
183  
206  
229  
252  
275  
6
7
8
9
10  
11  
12  
Zoom Ratio: 1.1x  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
How to get a preferred image size by adjusting  
distance and zoom  
A
50"  
Desired  
image size  
D
Height  
Form base to  
top of image  
2 m  
B
2.2 m  
Desired Distance  
C
The table below shows how to achieve a desired image size by adjusting either  
the position or the zoom ring. Example: to obtain an image size of 50" set the  
projector at a distance 2 m and 2.2 m from the screen and adjust the zoom level  
accordingly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14  
Desired Image Size  
Distance (m)  
Top (cm)  
From base to top of  
Diagonal (inch)  
Max zoom  
Min zoom  
<C>  
W (cm) x H (cm)  
image  
<D>  
<A>  
<B>  
30  
40  
61 x 46  
81 x 61  
1.2  
1.6  
2.0  
2.4  
2.8  
3.2  
3.6  
4.0  
4.8  
5.9  
7.1  
7.9  
9.9  
11.9  
1.3  
1.7  
2.2  
2.6  
3.1  
3.5  
3.9  
4.4  
5.2  
6.6  
7.9  
8.7  
10.9  
53  
70  
50  
102 x 76  
122 x 91  
142 x 107  
163 x 122  
183 x 137  
203 x 152  
244 x 183  
305 x 229  
366 x 274  
406 x 305  
508 x 381  
610 x 457  
88  
60  
105  
123  
140  
158  
175  
210  
263  
315  
351  
438  
526  
70  
80  
90  
100  
120  
150  
180  
200  
250  
300  
Zoom Ratio: 1.1x  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
User Controls  
Installation menu  
The installation menu provides an onscreen display (OSD) for projector  
installation and maintenance. Use the OSD only when the message "No signal  
input" is displayed on the screen.  
The menu options include settings and adjustments for screen size and distance,  
focus, keystone correction and more .  
1
2
Turn on the projector by pressing "Power" button on the control pad.  
Press the "MENU" button on the control pad to launch the OSD for  
projector installation and maintenance.  
3
4
The background pattern acts as a guide to adjusting the calibration and  
alignment settings, such as screen size and distance, focus and more .  
The Installation menu includes the following options:  
•Projection method  
•Projection location  
•Menu location  
•Keystone settings  
•Language settings  
•Reset to factory default function  
Use the up and down arrow keys to select an option, the left and right  
arrow keys to adjust selected option settings, and the right arrow key to  
enter a submenu for feature setting. The new settings will be saved  
automatically upon exiting the menu.  
5
Push the menu button anytime to exit the menu and return to the Acer  
welcome screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
16  
Acer Empowering Technology  
Acer Empowering Key provide three  
Empowering Key  
Acer unique functions, they are "Acer  
eView Management", "Acer eTimer  
Management" and "Acer ePower  
Management" respectively. Press "  
"
key for more than one second to launch  
the Onscreen display main menu to  
modify its function.  
Acer eView Management  
Press " " to launch "Acer eView  
Management" submenu.  
"Acer eView Management" is for  
display mode selection. Please refer to  
Onscreen Display Menus section for  
more detail.  
Acer eTimer Management  
Acer ePower Management  
Press " " to launch "Acer eTimer  
Management" submenu.  
"Acer eTimer Management" provides  
the reminding function for  
presentation time control. Please refer  
to Onscreen Display Menus section for  
more detail.  
Press " " to launch "Acer ePower  
Management".  
"Acer ePower Management" provides  
user one shortcut to save lamp and  
projector life. Please refer to Onscreen  
Display section for more detail.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
17  
Onscreen Display (OSD) Menus  
The projector has multilingual OSD that allow you to make image adjustments  
and change a variety of settings.  
Using the OSD menus  
To open the OSD menu, press "MENU" on the remote control.  
When the OSD is displayed, use the  
keys to select any item in the  
main menu. After selecting the desired main menu item, press  
submenu for feature setting.  
to enter  
Use the  
keys to select the desired item and adjust the settings by  
keys.  
using the  
Select the next item to be adjusted in the submenu and adjust as described  
above.  
Press "MENU" on the remote control, the screen will return to the main  
menu.  
To exit OSD, press "MENU" on the remote control again. The OSD menu  
will close and the projector will automatically save the new settings.  
Main menu  
Setting  
Sub menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18  
Color  
There are many factory presets optimized for various types of  
images.  
Display Mode  
Standard: For common environment.  
Video: For playing video in a bright environment.  
Bright: For brightness optimization.  
Picture: For graphic picture.  
Game: For game content.  
User: Memorize user’s settings.  
Use this function to choose a proper color according to the wall.  
There are several choices, including white, light yellow, light blue,  
pink, dark green. It will compensate the color deviation due to the  
wall color to show the correct image tone.  
Wall color  
Brightness  
Adjust the brightness of the image.  
Press  
Press  
to darken image.  
to lighten the image.  
"Contrast" controls the difference between the lightest and  
darkest parts of the picture. Adjusting the contrast changes the  
amount of black and white in the image.  
Contrast  
Press  
Press  
to decrease the contrast.  
to increase the contrast.  
Adjust the color temperature. At higher color temperatures, the  
screen looks colder; at lower color temperatures, the screen looks  
warmer.  
Color  
Temperature  
Effects the representation of dark scenery. With greater gamma  
value, dark scenery will look brighter.  
Degamma  
Adjusts the red color.  
Adjusts the green color.  
Adjusts the blue color.  
Color R  
Color G  
Color B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
19  
Adjusts a video image from black and white to fully saturated  
color.  
Saturation  
Tint  
Press  
Press  
to decrease the amount of color in the image.  
to increase the amount of color in the image.  
Adjusts the color balance of red and green.  
Press  
Press  
to increase the amount of green in the image.  
to increase the amount of red in the image.  
Note: "Saturation" and "Tint" functions are not supported under computer  
mode or DVI mode.  
Image  
Projection mode  
Front: The factory default setting.  
Rear: Reverses the image so you can project from behind a  
translucent screen.  
Projection Location  
Auto: Automatically adjusts projection location of image.  
Desktop  
Ceiling: Turns the image upside down for ceiling-mounted  
projection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
20  
Use this function to choose your desired aspect ratio.  
Aspect Ratio  
Auto: Keep the image with original width-higth ratio and maxi  
mize the image to fit native horizontal or vertical pixels.  
4:3: The image will be scaled to fit the screen and displayed using  
a 4:3 ratio.  
16:9: The image will be scaled to fit the width of the screen and  
the height adjusted to display the image using a 16:9 ratio.  
Auto Keystone  
Automatically adjusts vertical image.  
Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees)  
<Note> The Manual Keystone funcion is unavailable under Auto  
Keystone setting to "On".  
H. Position  
(Horizontal  
position)  
Press  
Press  
to move the image left.  
to to move the image right.  
V. Position  
(Vertical position)  
Press  
Press  
to move the image down.  
to move the image up.  
Frequency  
"Frequency" changes the projector's refresh rate to match the  
frequency of your computer’s graphics card. If you can see a vertical  
flickering bar in the projected image, use this function to make the  
necessary adjustments.  
Tracking  
Synchronizes the signal timing of the projector with the graphics card.  
If you experience an unstable or flickering image, use this function to  
correct it.  
Sharpeness  
Adjusts the sharpness of the image.  
Press  
Press  
to decrease the sharpness.  
to increase the sharpness.  
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions  
are not supported under DVI or Video mode.  
Note: "Sharpness" functions is not supported under DVI and Computer  
mode.  
Note: "Auto Keystone" functions is not supported in X1161A/X1161N.  
Note: "Projection Location-->  
X1161N.  
" functions is not supported in X1161A/  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Setting  
Menu Location  
Source Lock  
Choose the menu location on the display screen.  
When source lock is turned "off", the projector will search for  
other signals if the current input signal is lost. When source lock is  
turned "on", it will "lock" the current source channel unless you  
press "Source" button on the remote control for the next channel.  
Closed Caption  
Selects a preferred closed captioning mode from CC1, CC2, CC3,  
CC4, (CC1 displays captions in the primary language in your area).  
Select "Off" to turn off the captioning feature. This function is only  
available when a composite video or S-Video input signal is  
selected and its system format is NTSC.  
<Note> Set your screen aspect ratio to 4:3. This function is not  
available when the aspect ratio is "16:9" or "Auto" .  
Security  
Security  
This projector provides a useful security function for the  
administrator to manage usage of the projector .  
Press  
to change the "Security" setting. If the security function  
is enabled, your must enter the "Administrator Password" first  
before changing the security settings.  
Select "On" to enable the security function. The user has to  
enter a password to operate the projector. Please refer to the  
"User Password" section for details.  
If "Off" is selected, then the user can turn on the projector  
without password.  
Timeout(Min.)  
Once "Security" is activated to "On", the administrator can set  
timeout function.  
Press  
or  
to select the timeout interval.  
The range is from 10 minute to 990 minutes.  
When the time is up, the projector will prompt the user to  
enter the password again.  
The factory default setting of "Timeout(Min.)" is "Off".  
Once the security function is enabled, the projector will  
request user to enter password when switch on the projector .  
Both "User Password" and "Administrator Password" can be  
accepted for this dialogue.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22  
User password  
Press  
to setup or change the "User Password".  
Press number keys to set your password on the remote control  
and press "MENU" to confirm.  
Press  
to delete character.  
Enter the password when you see "Confirm Password"  
displayed.  
The password should be between 4 and 8 characters long.  
If you select "Request password only after plugging power  
cord", the projector will prompt the user to enter the  
password every time the power cord is plugged.  
If you select "Always request password while projector turns  
on", the user has to enter the password every time when the  
projector is turned on.  
Administrator Password  
The "Administrator Password" can be used in both the "Enter  
Administrator Password" and "Enter Password" dialog boxes.  
Press  
to change the "Administrator Password".  
The factory default of "Administrator Password" is "1234".  
If you forgot your administrator password, do the following to  
retrieve the administrator password:  
An unique 6-digit "Universal Password" which is printed on  
the Security Card (please check accessory in the box). This  
unique password is the number which will be accepted by  
projector anytime no matter what the Administrator  
Password is.  
If losing this security card and number, please contact with an  
Acer service center.  
Disable Power button  
When "ON" is selected, only the Power Key on the remote  
control can be used. If "OFF" is selected, then the Power Key  
on either the remote control or the control panel can be used  
to control the projector.  
Reset  
Press the  
button and choose "Yes" to return the  
parameters on all menus to the factory default settings.  
Note: "Closed Caption" functions is not supported in X1161N.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Management  
Choose "On" to dim the projector lamp which will lower power  
consumption, extend the lamp life and reduce noise. Choose "Off"  
to return normal mode.  
ECO Mode  
Choose "On" to turn on High Altitude mode. Operate the fans at  
full speed continuously to allow for proper high altitude cooling of  
the projector.  
High Altitutde  
Auto Shutdown  
The projector will automatically shutdown when there is no signal  
input after the allocated time. (in minutes)  
Lamp Hour Elapse  
Lamp Reminding  
Displays the lamp’s elapsed operating time (in hours).  
Activate this function to display a reminder to change the lamp 30  
hours before its expected end-of-life.  
Lamp Hour Reset  
Press the  
button and choose "Yes" to turn the lamp hour  
counter to 0 hours.  
Audio  
Volume  
Mute  
Press  
Press  
to decrease the volume.  
to increase the volume.  
Choose "On" to mute the volume.  
Choose "Off" to restore the volume.  
Note: Audio menu is for X1261 series.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
24  
Timer  
Timer Location  
Timer Start  
Choose the location of the timer on the screen.  
Press  
Press  
to start or stop the timer.  
Timer Period  
Timer Display  
or  
or  
to adjust the timer period.  
to which timer mode to display on the  
Press  
screen.  
Language  
Language  
Choose the multilingual OSD menu. Use the  
to select your preferred menu language.  
or  
key  
Press  
to confirm the selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
25  
Appendices  
Troubleshooting  
If you experience a problem with your Acer projector, refer to the following  
troubleshooting guide. If the problem persists, please contact your local reseller  
or service center.  
Image Problems and Solutions  
#
Problem  
Solution  
1
No image appears  
onscreen  
Connected as described in the "Getting Started"  
section.  
Ensure none of the connector pins are bent or  
broken.  
Check if the projector lamp has been securely  
installed. Please refer to the "Replacing the Lamp"  
section.  
Make sure you have removed the lens cap and the  
projector is switched on.  
2
Partial, scrolling  
or incorrectly  
displayed  
image(For PC  
(Windows 95/98/  
2000/XP))  
Press "RESYNC" on the remote control.  
For an incorrectly displayed image:  
Open "My Computer," open the "Control  
Panel," and then double-click the "Display"  
icon.  
Select the "Settings" tab.  
Verify that your display resolution setting is  
lower than or equal to UXGA (1600 x 1200).  
Click the "Advanced Properties" button.  
If the problem still appears, change the monitor display  
you are using and follow the steps below:  
Verify that the resolution setting is lower than  
or equal to UXGA (1600 x 1200).  
Click the "Change" button under the  
"Monitor" tab.  
Click "Show all devices". Next, select "Standard  
monitor types" under the SP box, and choose  
the resolution mode you need under the  
"Models" box.  
Verify that the resolution setting of the  
monitor display is lower than or equal to UXGA  
(1600 x 1200).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
26  
3
Partial, scrolling  
or incorrectly  
displayed image  
(For notebooks)  
Press "RESYNC" on the remote control.  
For an incorrectly displayed image:  
Follow the steps for item 2 (above) to adjust  
the resolution of your computer.  
Press the toggle output settings. Example:  
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],  
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP  
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]  
If you experience difficulty changing resolutions or  
your monitor freezes, restart all equipment  
including the projector.  
®
®
4
The screen of the  
notebook  
computer is not  
displaying your  
presentation  
If you are using a Microsoft Windows based  
notebook: Some notebook PCs may deactivate their  
own screens when a second display device is in use.  
Each has a different way to be reactivated. Refer to  
your computer's manual for detailed information.  
®
®
If you are using an Apple Mac OS based  
notebook: In System Preferences, open Display and  
select Video Mirroring "On".  
5
6
Image is unstable  
or flickering  
Adjust the "Tracking" to correct it. Refer to the  
"Image" section for more information.  
Change the display color depth settings on your  
computer.  
Image has vertical  
flickering bar  
Use "Frequency" to make an adjustment. Refer to  
the "Image" section for more information.  
Check and reconfigure the display mode of your  
graphics card to make it compatible with the  
projector.  
7
8
Image is out of  
focus  
Make sure the lens cap is removed.  
Adjusts the focus ring on the projector lens.  
Make sure the projection screen is within the  
required distance of 3.3 to 39.4 feet (1.0 to 12.0  
meters) from the projector. Refer to the "How to  
Get a Preferred Image Size by Adjusting Distance  
and Zoom" section for more information.  
Image is stretched  
when displaying a  
"widescreen"  
DVD title  
When you play a DVD encoded in anamorphic or 16:9  
aspect ratio you may need to adjust the following  
settings:  
If you play a 4:3 format DVD title, please change the  
format to 4:3 in the projector OSD.  
If the image is still stretched, you will also need to  
adjust the aspect ratio. Set up the display format to  
16:9 (wide) aspect ratio on your DVD player.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
9
Image is too small  
or too large  
Adjust the zoom lever on the front of the projector.  
Move the projector closer to or further from the  
screen.  
Press "MENU" on the remote control. Go to "Image  
--> Aspect Ratio" and try different settings or  
press"Aspect Ratio" on the remote control to adjust  
directly.  
10  
Image has slanted  
sides  
If possible, reposition the projector so that it is  
centered on the screen.  
Press the "Keystone  
/
" button on the remote  
control until the sides are vertical.  
Press "MENU" on the remote control. Go to "Image -  
-> Auto Keystone" and choose "Off" on the OSD, if  
"Keystone" button is not available on the remote  
control.  
11  
Image is reversed  
Select "Image --> Projection" on the OSD and adjust  
the projection direction.  
Problems with the Projector  
#
Condition  
Solution  
1
The projector stops responding  
to all controls  
If possible, turn off the projector, then  
unplug the power cord and wait at least 30  
seconds before reconnecting power.  
2
Lamp burns out or makes a  
popping sound  
When the lamp reaches the end of its useful  
life, it will burn out and may make a loud  
popping sound. If this happens, the projector  
will not turn on until the lamp module has  
been replaced. To replace the lamp, follow  
the procedures in the "Replacing the Lamp"  
section.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
OSD Messages  
#
Condition  
Message  
Message Reminder  
1
Fan Fail - the system fan is not working.  
Projector Overheated - the projector has exceeded its  
recommended operating temperature and must be allowed to  
cool down before it may be used.  
Replace the lamp - the lamp is about to reach its maximum  
lifetime. Prepare to replace it soon.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
LED & Alarm Definition Listing  
LED Messages  
Power LED  
Message  
Red  
Blue  
Input Power Plug  
Standby  
Flash ON to OFF 100ms  
--  
V
--  
Power button ON  
Lamp retry  
--  
V
--  
Quick Flashing  
Power off (Cooling state)  
Quick Flashing  
V
--  
--  
Power button OFF:  
Cooling completed;  
Standby Mode  
Error (Thermal Failure)  
Error (Fan lock)  
Quick Flashing RED and Steady BLUE by returns  
Quick Flashing RED and Steady BLUE by returns  
Quick Flashing BLUE and Steady RED by returns  
Quick Flashing BLUE and Steady RED by returns  
Error (Lamp breakdown)  
Error (Color Wheel fail)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
30  
Replacing the Lamp  
Use a screwdriver to remove the screw(s) from the cover, and then pull out the  
lamp.  
The projector will detect the lamp life. You will be shown a warning message  
"Lamp is approaching the end of its useful life in full power operation.  
Replacement Suggested!" When you see this message, change the lamp as soon  
as possible. Make sure the projector has been cooling down for at least 30  
minutes before changing the lamp.  
Warning: The lamp compartment is hot! Allow it to cool down  
before changing the lamp.  
1
3
2
4
To Change the Lamp  
1
2
3
4
5
6
Turn off the projector by pressing the Power button.  
Allow the projector at least 30 mins to cool down.  
Disconnect the power cord.  
Use a screwdriver to remove the screw from the cover. (Illustration #1)  
Push up and remove the cover.  
Remove the two screws that secure the lamp module (Illustration #2) and  
pull up the lamp bar.(Illustration #3)  
7
Pull out the lamp module by force. (Illustration #4)  
To replace the lamp module, reverse the previous step.  
Warning: To reduce the risk of personal injury, do not drop the  
lamp module or touch the lamp bulb. The bulb may shatter and  
cause injury if it is dropped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
31  
Ceiling Mount Installation  
If you wish to install the projector using a ceiling mount, please refer to the  
steps below:  
1
Drill four holes into a solid, structurally sound part of the ceiling, and  
secure the mount base.  
Note: Screws are not included. Please obtain the appropriate  
screws for your type of ceiling.  
2
Secure the ceiling rod using the appropriate type of four-cylinder screws.  
Ceiling Mount Base  
- Attach to ceiling  
Short Rod  
Long Rod  
Extension Rod  
Long Cylinder Cap  
Allen Key  
- For tightening/loosening  
Screw Type A  
50 mm length / 8 mm diameter -  
Tightening Screw  
Medium Rod  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
32  
3
Use the appropriate number of screws for the projector size to attach the  
projector to the ceiling mount bracket.  
Screw Type B  
Smaller Washer  
Large Washer  
Projector Bracket  
Supports projector and allows -  
for adjustments  
Spacer  
- For heat dissipation  
Note: It is recommended that you keep a reasonable space  
between the bracket and the projector to allow for proper heat  
distribution. Use two washers for extra support, if deemed  
necessary.  
4
Attach the ceiling bracket to the ceiling rod.  
Large cylinder cap  
Allen Key  
- For tightening/loosening  
Screw Type A  
50 mm length -  
Tightening Screw  
08 mm diameter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
5
Adjust the angle and positioning as necessary.  
Tightening Screw  
Allen Key  
30°  
Allen Key  
Tightening Screw  
Note: The appropriate type of screw and washer for each model is  
listed in the table below. 3 mm diameter screws are enclosed in  
the screw pack.  
Models  
Screw Type B  
Diameter (mm)  
Washer Type  
Length (mm)  
25  
Large  
V
Small  
V
X1161/X1161A/  
X1161N/X1261  
3
SCREW SPEC. M3 x 25 mm  
95.00 mm  
15.00 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Specifications  
The specifications listed below are subject to change without notice. For final  
specs, please refer to Acer's published marketing specifications.  
®
Projection system  
Resolution  
DLP  
X1161/X1161A/X1161N: Native: SVGA (800 x 600) ,  
Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050)  
X1261: Native: XGA (1024 x 768), Maximum: UXGA  
(1600 x 1200), WSXGA+ (1680x1050)  
Computer compatibility  
Video compatibility  
IBM PC and compatibles, Apple Macintosh, iMac and  
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,  
WXGA, WXGA+, WSXGA +  
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/  
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,  
576p), SDTV (480i, 576i)  
Aspect ratio  
4:3 (native), 16:9  
16.7 million colors  
Displayable colors  
Projection lens  
F/ 2.41 - 2.55, f = 21.79 mm - 23.99 mm, 1.1X manual  
zoom lens  
Projection screen size (diagonal) 23" (0.58 m) - 303" (7.70 m)  
Projection distance  
Throw ratio  
3.3' (1.0 m) - 39.4' (12.0 m)  
50"@2m (1.95 - 2.15:1)  
Horizontal scan rate  
Vertical refresh scan rate  
Lamp type  
30k - 100 kHz  
50 - 85 Hz  
180W user-replaceable lamp  
Keystone correction  
Audio  
± 40 degrees  
Internal speaker with 2 W output (X1261)  
2.26 Kg (4.9 lbs.)  
Weight  
Dimensions (W x D x H)  
Digital Zoom  
268 mm x 192 mm x 80 mm (10.6" x 7.6" x 3.1")  
2X  
Power supply  
AC input 100 - 240 V auto-switching power supply  
Power consumption  
230W ± 10% for normal mode  
200W ± 10% for ECO mode  
Operating temperature  
5ºC to 35ºC / 41ºF to 95ºF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
35  
I/O connectors  
X1161N series:  
Power socket x1  
VGA input x1  
USB x1: for remote computer control  
X1161/X1161A series:  
Power socket x1  
VGA input x1  
USB x1: for remote computer control  
Composite video x1  
S-Video x1  
X1261 series:  
Power socket x1  
VGA input x1  
RS232 x1  
Composite video x1  
S-Video x1  
VGA output x1  
3.5 mm audio jack input x1  
Standard package contents  
AC power cord x1  
VGA cable x1  
Composite video cable x1 (X1161/X1261 series)  
Remote control x1  
Battery x1 (for remote control)  
User's guide (CD-ROM) x1  
Quick start guide x1  
Security card x1  
Carrying case x1 (X1161/X1161N/X1261 series)  
* Design and specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Compatibility modes  
A. VGA Analog  
1
VGA Analog - PC Signal  
Modes  
VGA  
Resolution  
V.Frequency [Hz] H.Frequency [KHz]  
640x480  
640x480  
60  
72  
31.5  
37.9  
37.5  
43.3  
35.1  
37.9  
48.1  
46.9  
53.7  
49.7  
48.4  
56.5  
60.0  
68.7  
63.8  
67.5  
77.1  
64.0  
77.0  
80.0  
91.10  
60.0  
75.2  
65.3  
75.00  
34.9  
37.9  
48.4  
68.7  
75.0  
31.4  
34.9  
37.9  
48.4  
68.7  
75.0  
640x480  
75  
640x480  
85  
SVGA  
800x600  
56  
800x600  
60  
800x600  
72  
800x600  
75  
800x600  
85  
832x624  
75  
XGA  
1024x768  
1024x768  
1024x768  
1024x768  
1152x864  
1152x864  
1152x864  
1280X1024  
1280X1024  
1280X1024  
1280X1024  
1280x960  
1280x960  
1400x1050  
1600x1200  
640x480  
60  
70  
75  
85  
SXGA  
70  
75  
85  
60  
72  
75  
85  
QuadVGA  
60  
75  
SXGA+  
UXGA  
60  
60  
Power Mac G4  
66.6(67)  
60  
800x600  
1024x768  
1152x870  
1280x960  
640x480  
60  
75  
75  
PowerBook G4  
60  
640x480  
66.6(67)  
60  
800x600  
1024x768  
1152x870  
1280x960  
60  
75  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
37  
i Mac DV (G3)  
1024x768  
75  
60.0  
2
VGA Analog - Extended Wide Timing  
Modes  
WXGA  
Resolution  
1280x768  
1280x768  
1280x768  
1280x720  
1280x800  
1440x900  
1680x1050  
V.Frequency [Hz] H.Frequency [KHz]  
60  
75  
85  
60  
60  
60  
60  
47.8  
60.3  
68.6  
44.8  
49.6  
59.9  
65.3  
WSXGA+  
Horizontal scan rate:  
30k-100kHz  
50-85Hz  
Vertical scan rate:  
Max. pixel rate  
170MHz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Regulations and safety notices  
FCC notice  
This device has been tested and found to comply with the limits for a Class B  
digital device pursuant to Part 15 of the FCC rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This device generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this device does cause harmful interference to radio or television  
reception, which can be determined by turning the device off and on, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the device and receiver.  
Connect the device into an outlet on a circuit different from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio/television technician for help.  
Notice: Shielded cables  
All connections to other computing devices must be made using shielded cables  
to maintain compliance with FCC regulations.  
Notice: Peripheral devices  
Only peripherals (input/output devices, terminals, printers, etc.) certified to  
comply with the Class B limits may be attached to this equipment. Operation  
with non-certified peripherals is likely to result in interference to radio and TV  
reception.  
Caution  
Changes or modifications not expressly approved by the manufacturer could  
void the user's authority, which is granted by the Federal Communications  
Commission, to operate this device.  
Operation conditions  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
Notice: Canadian users  
This Class B digital apparatus complies with Canadian ICES-003.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
39  
Remarque à l'intention des utilisateurs canadiens  
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du  
Canada.  
Canada — Low-power license-exempt radio  
communication devices (RSS-210)  
a
Common information  
Operation is subject to the following two conditions:  
1. This device may not cause interference, and  
2. This device must accept any interference, including interference  
that may cause undesired operation of the device.  
b
Operation in 2.4 GHz band  
To prevent radio interference to the licensed service, this device is  
intended to be operated indoors and installation outdoors is subject  
to licensing.  
Declaration of Conformity for EU countries  
Acer hereby, declares that this projector series is in compliance with the  
essential requirements and other relevant provisions of Directive 1999/5/EC.  
Compliant with Russian regulatory certification  
Radio device regulatory notice  
Note: The regulatory information below is for models with  
wireless LAN and/or Bluetooth only.  
General  
This product complies with the radio frequency and safety standards of any  
country or region in which it has been approved for wireless use. Depending on  
configurations, this product may or may not contain wireless radio devices (such  
as wireless LAN and/or Bluetooth modules). The below information is for  
products with such devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
European Union (EU)  
R&TTE Directive 1999/5/EC as attested by conformity with the following  
harmonized standard:  
Article 3.1(a) Health and Safety  
EN60950-1:2001 + A11:2004  
EN50371:2002  
Article 3.1(b) EMC  
EN301 489-1 V1.6.1  
EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless  
keyboard mouse set)  
EN301 489-17 V1.2.1  
Article 3.2 Spectrum Usages  
EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless  
keyboard mouse set)  
EN300 328 V1.7.1  
EN301 893 V1.4.1 (Applicable to 5GHz high performance  
RLAN)  
List of applicable countries  
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France,  
Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United  
Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic,  
Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as  
Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict  
accordance with the regulations and constraints in the country of use. For further  
information, please contact a local office in the country of use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Acer America Corporation  
333 West San Carlos St., San Jose  
CA 95110, U. S. A.  
Tel : 254-298-4000  
Fax : 254-298-4147  
Federal Communications Commission  
Declaration of Conformity  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
The following local Manufacturer / Importer is responsible for this declaration:  
Product:  
DLP Projector  
Model Number:  
Machine Type:  
DSV0817/ DNX0818  
X1161/X1161N/X1161A/X1261 series  
Acer America Corporation  
Name of Responsible Party:  
Address of Responsible Party: 333 West San Carlos St.  
San Jose, CA 95110  
U. S. A.  
Contact Person:  
Phone No.:  
Fax No.:  
Acer Representative  
254-298-4000  
254-298-4147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Acer Incorporated  
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih  
Taipei Hsien 221, Taiwan  
Declaration of Conformity  
We,  
Acer Incorporated  
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan  
Contact Person: Mr. Easy Lai  
Tel: 886-2-8691-3089 Fax: 886-2-8691-3120  
Hereby declare that:  
Product:  
DLP Projector  
Trade Name:  
Model Number:  
Machine Type:  
Acer  
DSV0817/ DNX0818  
X1161/X1161N/X1161A/X1261 series  
Is compliant with the essential requirements and other relevant provisions of the following EC directives  
and that all the necessary steps have been taken and are in force to assure that production units of the  
same product will continue comply with the requirements.  
EMC Directive 2004/108/EC as attested by conformity with the following harmonized  
standards:  
-. EN55022: 2006, AS/NZS CISPR22: 2006, Class B  
-. EN55024: 1998 + A1: 2001 + A2:2003  
-. EN61000-3-2: 2006, Class A  
-. EN61000-3-3: 1995 + A1: 2001+A2: 2005  
Low Voltage Directive 2006/95/EC as attested by conformity with the following  
harmonized standard:  
-. EN60950-1: 2001 + A11: 2004  
Council Decision 98/482/EC (CTR21) for pan- European single terminal connection to the  
Public Switched Telephone Network (PSTN).  
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances  
in Electrical and Electronic Equipment  
The standards listed below are applied to the product if built with WLAN module or  
wireless keyboard and mouse.  
R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized  
standard:  
z Article 3.1(a) Health and Safety  
-. EN60950-1:2001 + A11:2004  
-. EN50371:2002  
z Article 3.1(b) EMC  
-. EN301 489-1 V1.6.1  
-. EN301 489-17 V1.2.1  
z Article 3.2 Spectrum Usages  
-. EN300 328 V1.7.1  
-. EN301 893 V1.4.1 (Applicable to 5GHz high performance RLAN)  
Year to begin affixing CE marking 2009.  
_______________________________  
Easy Lai /Manager  
Regulation Center, Acer Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acer Computer Monitor RB23WABAS User Manual
Actiontec electronic Network Router GT701WG User Manual
Adcom Home Theater System GTP 870HD User Manual
Adder Technology Network Card iPEPS User Manual
Agilent Technologies Welding System 08131 90001 User Manual
AMX Network Card TX MLCD User Manual
AMX Stud Sensor IRX DM+ User Manual
Axis Communications Security Camera 31922 User Manual
Axor Indoor Furnishings 16530XX1 User Manual
Beko Ventilation Hood CCB 7140 XA User Manual