Acer Computer Monitor S243HL User Manual

Acer LCD Monitor  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Information for your safety and  
comfort  
Safety instructions  
Read these instructions carefully. Keep this document for future reference.  
Follow all warnings and instructions marked on the product.  
Special notes on LCD monitors  
The following are normal with the LCD monitor and do not indicate a problem.  
Due to the nature of the fluorescent light, the screen may flicker during  
initial use. Turn off the power switch and then turn it on again to make  
sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the  
desktop pattern you use.  
The LCD screen has 99.99% or more effective pixels. It may include  
blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.  
Due to the nature of the LCD screen, an afterimage of the previous screen  
may remain after switching the image, when the same image is displayed  
for hours. In this case, the screen is recovered slowly by changing the image  
or turning off the power switch for a few hours.  
Cleaning your monitor  
Please carefully follow these guidelines when cleaning the monitor:  
Always unplug the monitor before cleaning.  
Use a soft cloth to wipe the screen and cabinet front and sides.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
iv  
Accessibility  
Be sure that the power outlet you plug the power cord into is easily accessible  
and located as close to the equipment operator as possible. When you need to  
disconnect power from the equipment, be sure to unplug the power cord from  
the electrical outlet.  
Safe listening  
To protect your hearing, follow these instructions.  
Gradually increase the volume until you can hear it clearly and comfortably  
and without distortion.  
After setting the volume level, do not increase it after your ears have  
adjusted.  
Limit the amount of time listening to music at high volume.  
Avoid turning up the volume to block out noisy surroundings.  
Turn the volume down if you can't hear people speaking near you.  
Warnings  
Do not use this product near water.  
Do not place this product on an unstable cart, stand or table. If the product  
falls, it could be seriously damaged.  
Slots and openings are provided for ventilation to ensure reliable  
operation of the product and to protect it from overheating. These  
openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug or other similar surface.  
This product should never be placed near or over a radiator or heat  
register, or in a built-in installation unless proper ventilation is provided.  
Never push objects of any kind into this product through cabinet slots as  
they may touch dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any kind onto or into  
the product.  
To avoid damage of internal components and to prevent battery leakage,  
do not place the product on a vibrating surface.  
Never use it under sporting, exercising, or any vibrating environment  
which will probably cause unexpected short current or damage internal  
devices.  
The adapter is only used for this monitor ,do not be used for other purposes.  
Using electrical power  
This product should be operated from the type of power indicated on the  
marking label. If you are not sure of the type of power available, consult  
your dealer or local power company.  
Do not allow anything to rest on the power cord. Do not locate this  
product where people will walk on the cord.  
If an extension cord is used with this product, make sure that the total  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
v
ampere rating of the equipment plugged into the extension cord does not  
exceed the extension cord ampere rating. Also, make sure that the total  
rating of all products plugged into the wall outlet does not exceed the fuse  
rating.  
Do not overload a power outlet, strip or receptacle by plugging in too  
many devices. The overall system load must not exceed 80% of the branch  
circuit rating. If power strips are used, the load should not exceed 80% of  
the power strip's input rating.  
This product's power cord is equipped with a three-wire grounded plug.  
The plug only fits in a grounded power outlet. Make sure the power outlet  
is properly grounded before inserting the power cord plug. Do not insert  
the plug into a non-grounded power outlet. Contact your electrician for  
details.  
Warning! The grounding pin is a safety feature. Using a power  
outlet that is not properly grounded may result in electric shock  
and/or injury.  
Note: The grounding pin also provides good protection from  
unexpected noise produced by other nearby electrical devices that  
may interfere with the performance of this product.  
Use the product only with the supplied power supply cord set. If you need  
to replace the power cord set, make sure that the new power cord meets  
the following requirements: detachable type, UL listed/CSA certified, type  
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6  
meters (15 feet) maximum length.  
Product servicing  
Do not attempt to service this product yourself, as opening or removing covers  
may expose you to dangerous voltage points or other risks. Refer all servicing to  
qualified service personnel.  
Unplug this product from the wall outlet and refer servicing to qualified service  
personnel when:  
the power cord or plug is damaged, cut or frayed  
liquid was spilled into the product  
the product was exposed to rain or water  
the product has been dropped or the case has been damaged  
the product exhibits a distinct change in performance, indicating a need  
for service  
the product does not operate normally after following the operating  
instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
vi  
Note: Adjust only those controls that are covered by the operating  
instructions, since improper adjustment of other controls may  
result in damage and will often require extensive work by a  
qualified technician to restore the product to normal condition.  
Potentially explosive environments  
Switch off your device in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Potentially explosive atmospheres include areas  
where you would normally be advised to turn off your vehicle engine. Sparks in  
such areas could cause an explosion or fire resulting in bodily injury or even  
death. Switch off the device near gas pumps at service stations. Observe  
restrictions on the use of radio equipment in fuel depots, storage and  
distribution areas; chemical plants; or where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often, but not always,  
marked. They include below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas (such as propane or butane),  
and areas where the air contains chemicals or particles such as grain, dust or  
metal powders.  
Additional safety information  
Your device and its enhancements may contain small parts. Keep them out of  
the reach of small children.  
IT Equipment Recycling Information  
Acer is strongly committed to environmental protection and views recycling, in  
the form of salvaging and disposal of used equipment, as one of the company's  
top priorities in minimizing the burden placed on the environment.  
We at Acer are very conscious of the environmental effects of our business and  
strive to identify and provide the best working procedures to reduce the  
environmental impact of our products.  
For more information and help when recycling, please go to this website:  
Visit  
of our other products.  
for further information on the features and benefits  
Disposal instructions  
Do not throw this electronic device into the trash when discarding.  
To minimize pollution and ensure utmost protection of the global  
environment, please recycle. For more information on the Waste  
from Electrical and Electronics Equipment (WEEE) regulations, visit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
vii  
LCD pixel statement  
The LCD unit is produced with high-precision manufacturing techniques.  
Nevertheless, some pixels may occasionally misfire or appear as black or  
red dots. This has no effect on the recorded image and does not constitute  
a malfunction.  
This product has been shipped enabled for power management:  
Activate display’s Sleep mode within 15 minutes of user inactivity.  
Activate computer’s Sleep mode within 30 minutes of user inactivity.  
Wake the computer from Sleep mode by pushing the power button.  
Tips and information for comfortable use  
Computer users may complain of eyestrain and headaches after prolonged use.  
Users are also at risk of physical injury after long hours of working in front of a  
computer. Long work periods, bad posture, poor work habits, stress,  
inadequate working conditions, personal health and other factors greatly  
increase the risk of physical injury.  
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,  
tenosynovitis or other musculoskeletal disorders. The following symptoms may  
appear in the hands, wrists, arms, shoulders, neck or back:  
numbness, or a burning or tingling sensation  
aching, soreness or tenderness  
pain, swelling or throbbing  
stiffness or tightness  
coldness or weakness  
If you have these symptoms, or any other recurring or persistent discomfort  
and/or pain related to computer use, consult a physician immediately and  
inform your company's health and safety department.  
The following section provides tips for more comfortable computer use.  
Finding your comfort zone  
Find your comfort zone by adjusting the viewing angle of the monitor, using a  
footrest, or raising your sitting height to achieve maximum comfort. Observe  
the following tips:  
refrain from staying too long in one fixed posture  
avoid slouching forward and/or leaning backward  
stand up and walk around regularly to remove the strain on your leg  
muscles  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
viii  
Taking care of your vision  
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive  
room lighting, poorly focused screens, very small typefaces and low-contrast  
displays could stress your eyes. The following sections provide suggestions on  
how to reduce eyestrain.  
Eyes  
Rest your eyes frequently.  
Give your eyes regular breaks by looking away from the monitor and  
focusing on a distant point.  
Blink frequently to keep your eyes from drying out.  
Display  
Keep your display clean.  
Keep your head at a higher level than the top edge of the display so your  
eyes point downward when looking at the middle of the display.  
Adjust the display brightness and/or contrast to a comfortable level for  
enhanced text readability and graphics clarity.  
Eliminate glare and reflections by:  
placing your display in such a way that the side faces the window or  
any light source  
minimizing room light by using drapes, shades or blinds  
using a task light  
changing the display's viewing angle  
using a glare-reduction filter  
using a display visor, such as a piece of cardboard extended from the  
display's top front edge  
Avoid adjusting your display to an awkward viewing angle.  
Avoid looking at bright light sources, such as open windows, for extended  
periods of time.  
Developing good work habits  
Develop the following work habits to make your computer use more relaxing  
and productive:  
Take short breaks regularly and often.  
Perform some stretching exercises.  
Breathe fresh air as often as possible.  
Exercise regularly and maintain a healthy body.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
Acer Incorporated  
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih  
Taipei Hsien 221, Taiwan  
Tel : 886-2-2696-1234  
Fax : 886-2-2696-3535  
Declaration of Conformity  
We,  
Acer Incorporated  
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan  
Contact Person: Mr. Easy Lai, E-mail: [email protected]  
And,  
Acer Europe SA  
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland  
Hereby declare that:  
Product:  
LCD Monitor  
Acer  
Trade Name:  
Model Number:  
Series Model Type:  
SKU Number:  
S243HL  
S243HLxxxx (“x” = 0~9, a ~ z, or A ~ Z)  
Is compliant with the essential requirements and other relevant provisions of the following EC directives,  
and that all the necessary steps have been taken and are in force to assure that production units of the  
same product will continue comply with the requirements.  
EMC Directive 2004/108/EC as attested by conformity with the following harmonized  
standards:  
-. EN55022, AS/NZS CISPR22 Class B.  
-. EN55024  
-. EN61000-3-2, Class D  
-. EN61000-3-3  
Low Voltage Directive 2006/95/EC as attested by conformity with the following  
harmonized standard:  
-. EN60950-1  
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances  
in Electrical and Electronic Equipment:  
-. The maximum concentration values of the restricted substances by weight in homogenous material are:  
Lead  
Mercury  
0.1% Polybrominated Biphenyls (PBB’s)  
0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%  
0.01%  
0.1%  
Hexavalent Chromium 0.1% Cadmium  
Directive 2005/32/EC of the European Parliament and of the Council with regard to Eco-  
design Requirements.  
Year to begin affixing CE marking 2009.  
_______________________________  
Easy Lai /Manager  
Regulation, Acer Inc.  
Jul. 13, 2009  
Date  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
x
Federal Communications Commission  
Declaration of Conformity  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2)  
this device must accept any interference received, including interference that may  
cause undesired operation.  
The following local Manufacturer /Importer is responsible for this declaration:  
Product Name:  
24”W LCD Monitor  
S243HLxxxx  
Main Model Number:  
Series Model Number:  
S243HLxxxx  
Name of Responsible Party: Acer America Corporation  
Address of Responsible Party: 333 West San Carlos St.  
San Jose, CA 95110  
U. S. A.  
Contact Person:  
Phone No.:  
Fax No.:  
Acer Representative  
254-298-4000  
254-298-4147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Unpacking  
Please check that the following items are present when you unpack the box,  
and save the packing materials in case you need to ship or transport the  
monitor in the future.  
LCD monitor  
D-sub cable  
Audio Cable  
User guide  
Quick start guide  
HDMI cable  
(Optional)  
AC Power cord  
Adapter  
AC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Attaching the base (for selected models)  
Note: Remove the monitor and monitor base from its packaging.  
Carefully place the monitor face-down on a stable surface -- use a  
cloth to avoid scratching the screen.  
1
2
Attach the the monitor stand arm to the base.  
Ensure that the base is locked onto the monitor stand arm.  
Note: Take care when performing the installation to avoid  
injuring yourself.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Screen position adjustment  
To optimize the viewing position, you can adjust  
the monitor tilt, using both of your hands to hold  
the edges of the monitor. The monitor can be  
adjusted to 15 degrees up or 5 degrees down.  
Connecting the adapter and AC Power code  
Check first to make sure that the power cord  
you use is the correct type required for your  
area.  
The monitor has a universal power supply  
that allows operation in either 100/120 V AC  
or 220/240 V AC voltage area. No user-  
adjustment is required.  
Plug one end of the AC power cord to the  
Adapter, and plug the other end into an AC outlet.  
For units using 120 V AC:  
Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.  
For units using 220/240 V AC:  
Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The  
cord set should have the appropriate safety approvals for the country in  
which the equipment will be installed.  
Power saving  
The monitor will be switched to "power saving" mode by the control signal  
from the display controller, as indicated by the amber-colored power LED.  
Mode  
On  
LED light  
Blue  
Power saving  
Orange  
The power saving mode will be kept until a control signal has been detected or  
the keyboard or mouse is activated. The recovery time from "power saving"  
mode back to "on" is around 3 seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Display Data Channel (DDC)  
To make installation easier, so long as your system supports the DDC protocol,  
the monitor is able to plug-and-play. The DDC is a communication protocol  
through which the monitor automatically informs the host system about its  
capabilities; for example, supported resolutions and corresponding timing. The  
monitor supports the DDC2B standard.  
Connector pin assignment  
1
5
10  
6
11  
15  
15-pin color display signal cable  
PIN No. Description  
PIN No. Description  
1
2
3
4
5
6
7
8
Red  
9
+5 V  
Green  
10  
11  
12  
13  
14  
15  
Logic ground  
Monitor ground  
DDC-serial data  
H-sync  
Blue  
Monitor ground  
DDC-return  
R-ground  
G-ground  
B-ground  
V-sync  
DDC-serial clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5
19-pin color display signal cable  
1917151311 9 7 5 3 1  
1816141210 8 6 4 2  
PIN No.  
Description  
TMDS Data2+  
PIN No.  
Description  
1
3
2
4
TMDS Data2 Shield  
TMDS Data2–  
TMDS Data1 Shield  
TMDS Data0+  
TMDS Data0–  
TMDS Clock Shield  
CEC  
TMDS Data1+  
TMDS Data1–  
TMDS Data0 Shield  
TMDS Clock+  
TMDS Clock–  
Reserved (N.C. on device)  
SDA  
5
6
7
8
9
10  
12  
14  
16  
18  
11  
13  
15  
17  
19  
SCL  
DDC/CEC Ground  
Hot Plug Detect  
+5V Power  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
6
Standard timing table  
Mode  
Resolution  
640x480  
640x480  
640x480  
640x480  
720x400  
800x600  
800x600  
800x600  
800x600  
832x624  
1024x768  
1024x768  
1024x768  
1152x870  
1152x864  
1280x960  
1280x1024  
1280x1024  
1280x720  
1280x768  
1
2
60  
72  
75  
66.7  
70  
56  
60  
72  
75  
74.55  
60  
70  
75  
75  
75  
60  
60  
75  
60  
60  
75  
60  
60  
75  
60  
60  
60  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
VGA  
3
MAC  
4
VESA  
5
6
7
SVGA  
8
9
MAC  
XGA  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
MAC  
VESA  
SXGA  
VESA  
1280x768  
1280x800  
WXGA 1360x768  
1440x900  
WXGA+  
1440x900  
SXGA+  
UXGA  
1440x1050  
1600x1200  
1680x1050  
28  
60  
75  
60  
60  
Hz  
Hz  
Hz  
Hz  
WSXGA+  
1680x1050  
1600x1200  
1920x1080  
29  
30  
31  
UXGA  
VESA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
7
Installation  
To install the monitor on your host system, please follow the steps below:  
Steps  
1
Connect the video cable  
a
b
c
Make sure both the monitor and computer are switched off.  
Connect the VGA video cable to the computer.  
Connect the digital cable  
(1) Make sure both the monitor and computer are switched off.  
HDMI Cable (Only HDMI-Input Model)  
(2)  
a. Make sure both the monitor and computer are powered-OFF.  
b. Connect the HDMI cable to the computer.  
2 Connect the Audio Cable  
3
Connect the adapter  
a
b
Connect the AC cord to the adapter.  
Connect one and of the adapter to the monitor and the other and to  
a properloy grounded,AC outlet.  
4
Turn on the monitor and computer  
Turn on the monitor first, then the computer. This sequence is very  
important.  
5
If the monitor does not function properly, please refer to the  
troubleshooting section to diagnose the problem  
DC  
1
2
2
1
2
2
Audio  
D-Sub  
HDMI 1  
HDMI 2  
HDMI 2 HDMI 1  
D-Sub  
Audio  
DC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Users controls  
Base controls  
Icon  
Item  
Description  
Power  
Turns the monitor on/off. Blue indicates power on.  
button/  
indicator  
Amber indicates standby/power saving mode.  
/
Minus / Plus  
If the OSD is active, press the Minus or Plus buttons  
to toggle between the OSD options.  
OSD  
functions  
Press to view the OSD. Press again to enter a  
selection in the OSD. Please refer to "Adjusting the  
OSD settings" on page 11 for more details.  
Auto adjust  
button/Exit  
If the OSD is active, press Auto to exit the OSD.  
Once the OSD is inactive, press Auto and the  
monitor will automatically optimize the display  
position, focus, and clock of your display.  
Empowering Press the Empowering Key to open the Acer eColor  
Key  
Management OSD and access the scenario modes.  
Please refer to "Acer eColor Management" on page  
10 for more details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9
Acer eColor Management  
Operation instructions  
1
Press the  
Empowering Key to open the Acer eColor Management OSD  
and access the scenario modes.  
2
3
Press "  
" or "  
" to select the mode.  
Press the Auto-adjust button to confirm the mode and exit Acer eColor  
Management.  
Features and benefits  
Main  
menu Sub menu item Description  
icon  
User mode  
User-defined. Settings can be fine-tuned to suit any  
situation.  
Text mode  
Optimal balance of brightness and contrast to  
prevent eyestrain. The most comfortable way to  
read onscreen text.  
Standard mode Default settings. Reflects native display capability.  
Graphic mode  
Movie mode  
Enhances colors and emphasizes fine detail. Pictures  
and photographs appear in vibrant colors with  
sharp detail.  
Displays scenes in clearest detail. Presents great  
visuals, even in unsuitably-lit environments.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
10  
Adjusting the OSD settings  
Note: The following content is for general reference only. Actual  
product specifications may vary.  
The OSD can be used for adjusting the settings of your LCD Monitor.  
Press the Menu key to open the OSD. You can use the OSD to adjust the picture  
quality, OSD position and general settings. For advanced settings, please refer  
to following page:  
Adjusting the picture quality  
1
2
Press the Menu key to bring up the OSD.  
/
Using the  
keys, select  
Picture from the OSD. Then navigate to the  
picture element you wish to adjust.  
/
3
4
Use the  
keys to adjust the sliding scales.  
The Picture menu can be used to adjust the current Brightness, Contrast,  
Colour Temp, Auto Config and other image-related qualities.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Adjusting the OSD position  
1
2
Press the Menu key to bring up the OSD.  
Using the directional keys, select  
OSD from the onscreen display.  
Then navigate to the feature you wish to adjust.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Adjusting the setting  
1
2
Press the Menu key to bring up the OSD.  
Using the keys, select Setting from the OSD. Then navigate to the  
feature you wish to adjust.  
/
3
The Setting menu can be used to adjust the screen Menu Language and  
other important settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Product information  
1
2
Press the Menu key to bring up the OSD.  
Using the keys, select Information from the OSD. Then the basic  
/
information of LCD monitor will show up for current input.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Troubleshooting  
Before sending your LCD monitor for servicing, please check the  
troubleshooting list below to see if you can self-diagnose the problem.  
VGA mode  
Problem  
LED status  
Remedy  
No picture visible  
Using the OSD, adjust brightness and  
contrast to maximum or reset to their  
default settings.  
Blue  
Off  
Check the power switch.  
Check if the power cord is properly  
connected to the monitor.  
Amber  
Check if the video signal cable is  
properly connected at the back of  
monitor.  
Check if the computer system is  
switched on and in power saving/  
standby mode.  
Unstable picture  
Abnormal picture  
Check if the specification of graphics  
adapter and monitor is in compliance  
which may be causing the input signal  
frequency mismatch.  
Image is missing, Using the OSD, adjust focus, clock, H-  
off-center, too  
large or too  
small on the  
screen.  
position and V-position with non-  
standard signals.  
Check the display setting on your  
system. In case of a missing image,  
please select another resolution or  
vertical refresh rate.  
Wait for a few seconds after adjusting  
the size of the image before changing  
or disconnecting the signal cable or  
switching off the monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
HDMI mode  
Problem  
LED status  
Blue  
Remedy  
No picture visible  
Using the OSD, adjust brightness and  
contrast to maximum or reset to their  
default settings.  
Off  
Check the power switch.  
Check if the AC power cord is properly  
connected to the monitor.  
Amber  
Check if the video signal cable is  
properly connected at the back of  
monitor.  
Check that the computer system is  
switched on and in power saving/  
standby mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   

Accusplit Heart Rate Monitor AX725BKC User Manual
ADC Network Card FTTX Service Pack User Manual
ADTRAN Network Card TSU 600 User Manual
Agilent Technologies Oven E1441A User Manual
Aiphone Home Security System KA DGR User Manual
Alliance Laundry Systems Water System F232122R3 User Manual
Atmel Network Router ATAVRAUTO100 User Manual
Avital Automobile Alarm 3300 User Manual
Baldor Remote Starter MN894 User Manual
Behringer Music Pedal RV600 User Manual