|
802.11b Wireless
CardBus PC Card
Quick Installation
M73-APO01-630
Download from Www.Somanuals.com. All Manuals Search And Download.
7. When Windows prompts you to restart your
computer, click Yes.
In Windows ME
1. Select Specify the location of the driver
(Advanced), click Next.
2. Insert the supplied CD-ROM into the
CD-ROM drive. Select Search for the best
driver for your device (Recommended) and
click Browse to provide the appropriate path
(e.g. D:\WINME.) Click Next.
3. Click Next, Windows will copy all the
necessary files to your system.
4. Click Finish to complete the installation.
5. When Windows prompts you to restart your
computer, click Yes.
In Windows 2000
1. In Found New Hardware Wizard, click
Next.
2. In Install Hardware Device Drivers, select
Search for a suitable driver for my device
(recommended), click Next.
3. Insert the supplied CD-ROM into the
CD-ROM drive. Select Specify a location,
click Next.
4. Click Browse to provide the appropriate path
(e.g. D:\WIN2000). Click OK.
5. Click Next, Windows will copy all the
necessary files to your system.
6. In Digital Signature Not Found window,
click Yes to continue.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Click Finish to complete the installation.
In Windows XP
1. Select Install from a list or specific location
(Advanced) and click Next.
2. Insert the supplied CD-ROM into the
CD-ROM drive. Select Include this location
in the search: and click Browse to provide
the appropriate path (e.g. D:\WINXP). Click
Next.
3. Click Continue Anyway to proceed.
Windows will copy all the necessary files to
your system.
4. Click Finish to complete the installation.
Verify
To verify if the device exists in your computer
and is enabled, go to Start ꢀ Settings ꢀ
Control Panel ꢀSystem (ꢀHardware) ꢀ
Device Manager. Expand the Network adapters
category. If the 802.11b Wireless LAN CardBus
(Mini-) PCI NIC is listed here, it means that
your device is properly installed and enabled.
Install the Utility
1. Insert the supplied CD-ROM into the
CD-ROM drive. Double click on Setup.exe
to install the Wireless LAN Utility.
2. When the Welcome screen appears, click
Next to continue.
2. In License Agreement, click Yes to accept
the terms.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click Finish to complete the installation.
NETWORK CONNECTION
Once the driver has been installed, you must
make some changes to your network settings.
In Windows 98/ME
1. Go to Start ꢀSettings ꢀControl Panel ꢀ
Network.
2. Make sure that the following components are
installed.
ꢁ802.11b Wireless LAN CardBus(Mini-) PCI NIC
ꢁIPX/SPX-compatible Protocol
ꢁNetBEUI
ꢁTCP/IP
If any components are missing, click on the Add
button to add them in. All the protocols and
clients required and listed above are provided by
Microsoft.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. After clicking Add, highlight the component
you need, click Add.
4. Highlight Microsoft, and then double click
on the item you want to add. Click OK.
5. For making your computer visible on the
network, enable the File and Print Sharing.
6. Click the Identification tab. Make up a name
that is unique from the other computers'
names on the network. Type the name of
your workgroup, which should be the same
used by all of the other PCs on the network.
7. Click the Access Control tab. Make sure
that “Share-level access control” is selected.
If connecting to a Netware server, share level
can be set to “User-level access control.”
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8. When finished, restart your computer to
activate the new device.
9. Once the computer has restarted and
Windows has booted up, a Logon window
will appear and require you to enter a
username and password. Make up a
username and password and click OK. Do
not click the Cancel button, or you won’t be
able to log onto the network.
10. Double-click the Network Neighborhood
icon on the windows desktop, and you should
see the names of the other PCs on the
network.
In Windows 2000/XP
1. (In Windows 2000)
Go to StartꢀSettings ꢀControl Panel ꢀ
Network and Dial-up Connections ꢀ
Local Area Connection ꢀProperties.
(In Windows XP)
Go to Start ꢀControl Panel ꢀNetwork
Connections ꢀ Wireless Network
Connection Enabled 802.11b Wireless
LAN CardBus(Mini-) PCI NIC ꢀ
Properties.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Make sure that you have all the following
components installed.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ Client for Microsoft Networks
ꢁ NWLink NetBIOS
ꢁ 802.11b EAPPkt Protocol
ꢁ Internet Protocol (TCP/IP)
3. If any components are missing, click on the
Install… button to select the
Client/Service/Protocol required. After
selecting the component you need, click
Add… to add it in.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. For making your computer visible on the
network, make sure you have installed File
and Printer Sharing for Microsoft
Networks.
5. When finished, you must restart your
computer to complete the installation.
CONFIGURATION
After successful installation of the Wireless PC
Card’s Driver and Utility, a Network Status icon
will display in the system tray. Meanwhile,
a Utility Shortcut icon
will appear on the
desktop.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing the Configuration Utility
Double-click on
Utility.
to open the Configuration
Click Advanced to enter the Configuration
Window.
All settings are categorized into 6 Tabs:
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Config Tab
The Config tab allows you to configure WEP
encryption and add/remove Profile(s).
Item
Description
Available
Wireless
Displays all available networks.
Network(s)
Configure
Highlight an available network, click
Configure to set up WEP encryption (see
diagram below).
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Refresh
Click the button to refresh and search for
all available networks.
Item
Description
Available Displays all available profiles.
Profile(s)
Click the button and the Wireless
Add
Network Properties window will appear.
In the Network Name (SSID) field, enter
your desired network name listed in the
above Available Wireless Network(s)
box, and click OK.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Highlight the unwanted profile listed in
the Available profile(s) box, and click
the button to remove it.
Remove
Highlight a profile, click the button to set
it as a default profile.
Set Default
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Config Tab
The Advanced Config Tab allows you to change
advanced configuration settings, such as the Ad
Hoc default channel, Power Save and Radio
Off.
Item
Description
Ad Hoc default Select the appropriate channel from
channel
the list provided to correspond with
your network settings. All devices
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
in the wireless LAN must be
configured to share the same radio
channel in order to function properly.
Power Save ꢂKeeps the PC card powered up
CAM
(Constantly
continuously so there is little lag in
message response time.
Awake Mode)
Consumes the most power but offers
the
highest
throughput.
Is
recommended for desktop computers
and devices that use AC power.
ꢂMax (Power Causes the access point to buffer
Save Mode)
incoming messages for the client
adapter, which wakes up periodically
and polls the access point to see if
any buffered messages are waiting for
it. The PC card can request each
message and then go back to sleep.
Conserves the most power but offers
the
lowest
throughput.
Is
recommended for devices which
power consumption is the ultimate
concern
(such
as
small
battery-powered devices).
ꢂFast (Power Switched between PSP mode and
Save Mode)
CAM mode, depending on network
traffic. This mode switched to CAM
when retrieving a large number of
packets and switches back to PSP
after the packets have been retrieved.
It is recommended when power
consumption is a concern but you
need greater throughput than that
allowed by Max PSP.
Encryption
Algorithm
WEP (Wired Equivalent Privacy)
AES (Advanced Encryption Standard)
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TKIP (Temporal
Key Integrity
Protocol)
Select one from the list to ensure the
security of your wireless network.
Preamble
Mode
A preamble is a signal used in
wireless environment to synchronize
the transmitting timing including
Synchronization and Start frame
delimiter. (Note: Please check the
setting of AP first.)
ꢂAuto
Select Auto for the USB adapter to
select
the
Preamble
type
automatically depending on the
Access Point Preamble type.
ꢂLong
ꢂShort
In a "noisy" network environment,
the Preamble Type should be set to
Long Preamble.
The Short Preamble is intended for
applications
where
minimum
overhead and maximum performance
is desired. In a "noisy" network
environment, the performance would
be decreased.
ꢃShow icon in Check this box to show icon in
System Tray
system tray.
ꢃRadio Off
Check/Uncheck this box to
disable/enable the radio module
function of the Wireless PC Card.
Rescan
Searches for all available networks.
Click this button to rescan and issue
an updated list of all available sites.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Tab
The Status Tab displays basic link information,
including Channel Set, MAC Address,
Network Type and Power Save Mode.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Statistics Tab
The Statistics tab shows the available statistic
information. Press Reset button to renew this list
of statistics.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
About Tab
Click on the About tab to view basic version
information about the Configuration Utility.
Exit Tab
Click on the Exit tab to exit the application.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|