ATP-CNX-020
Document Revision 01.06
Aastra CNX
Conference Network Switch
Release 1.2
July 2005
Aastra CNX
Conference Network Switch
Installation and Setup Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warranty, regulatory, safety, and copyright / licensing notices
Warranty - Aastra Telecom, Inc. ........................................................................................v
Warranty Limitation .....................................................................................................v
Regulatory information ..................................................................................................... vi
Safety warnings .................................................................................................................x
General warnings ........................................................................................................x
Lithium battery caution ................................................................................................x
Compliances ...............................................................................................................x
.
.
.
.
.
Welcome
Introduction ......................................................................................................................xiii
What does the Aastra CNX do? ................................................................................xiii
What is in the Aastra CNX shipping package? ........................................................ xiv
.
.
Aastra CNX
Installation and Setup Procedures
Procedures ........................................................................................................................1
Preparing for the hardware installation .......................................................................2
Installing the Aastra CNX in a rack .............................................................................3
Connecting to the console port ...................................................................................4
Connecting the network cables ...................................................................................5
Connecting the AC power cable ..................................................................................6
Starting up and checking the Aastra CNX ...................................................................7
Configuring the network settings .................................................................................8
.
.
.
.
.
.
.
.
Using the Aastra CNX GUI via the Web ....................................................................16
.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty, regulatory, safety, and
copyright / licensing notices
Warranty - Aastra Telecom, Inc.
Aastra Telecom Inc. ("Aastra") warrants ("Warranty") to its customer that: (i) Aastra has good and marketable title to
the Product at the time of delivery to its customer, free and clear of any and all security interests, liens, claims, charges
or encumbrances; and (ii) the Product shall be free from defects in design, material and workmanship and shall
perform in accordance with the Aastra specifications in all material respects when used for the intended purpose for a
period of twelve (12) months from the date of purchase of the Product by such customer from Aastra ("Warranty
Period"). This Warranty specifically excludes any representation, warranty, condition or other term relating to any
software contained in the Product. At its sole option, Aastra shall either repair or replace defective Product returned
during the Warranty Period. Any repaired or replacement Product shall subsequently be covered for the balance of the
original Warranty Period or ninety (90) days, whichever is longer. Upon customer's specific request, Product that fails
after the Warranty Period expires may be returned for repair at the then current rates, with the cost of such repairs and
shipping to be borne by customer.
Customer shall obtain a "returned material authorization" ("RMA") number from Aastra and comply with shipping
instructions for all defective Products being returned to Aastra. Defective Products shall be returned to Aastra at the
customer's sole expense. Aastra shall repair or replace defective Products returned under Warranty at no charge to
customer, and Aastra shall bear the expense of the return shipment of the repaired or replacement Product to customer.
Aastra does not warrant the Product to be compatible with the equipment of any particular telephone company, or their
network. This Warranty does not extend to Products damaged by improper installation or operation, alteration,
accident, neglect abuse, misuse, fire or natural causes such as storms or floods. Aastra reserves the right to use
refurbished parts in the repair or replacement of defective Products. Unauthorized modification or repair will void the
Warranty.
To exercise the Aastra CNX Warranty,:
1. First contact your reseller for instructions.
2. Alternatively, you can contact Aastra Telecom at 1-866-599-7399.
Warranty Limitation
THE FOREGOING PRODUCT WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES AS TO THE
CONDITION, OPERATION AND PERFORMANCE OF THE PRODUCT, EXPRESSED OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES AND/OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AASTRA'S SOLE AND EXCLUSIVE
LIABILITY, AND CUSTOMER'S SOLE AND EXCLUSIVE REMEDY, FOR ANY AASTRA BREACH OF
WARANTIES HEREUNDER SHALL BE AASTRA'S OBLIGATION TO REPAIR OR REPLACE THE PRODUCT,
AS SET FORTH IN THIS SECTION, AND AASTRA SHALL NOT BE LIABLE FOR ANY DAMAGES
WHATSOVER, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, INCIDENTIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE, OR OTHER LOSS, DAMAGE OR EXPENSE
DIRECTLY OR INDIRECTLY ARISING FROM CUSTOMER'S USE OF OR INABILITY TO USE PRODUCT,
EITHER SEPARATELY OR IN COMBINATION WITH OTHER EQUIPMENT.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Regulatory information
Regulatory information
U.S.A. requirements
The AASTRA CNX has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the
instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case users will be required to take whatever measures
may be necessary to correct the interference at their own expense.
Do not attempt to repair or modify this equipment. All repairs must be performed by Aastra Telecom, or an authorized
Aastra Telecom representative.
FCC Part 68 general information
The AASTRA CNX complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains, among other information, a product identifier in the format
US:2L4DDNANAASTRA01. If requested, this number must be provided to the telephone company.
This Aastra CNX uses the following USOC RJ-48 jacks:
Interface
Service Code
Facility Code
1.544 Mb/s superframe format (SF) without line power
6.0Y
6.0Y
6.0Y
04DU9-BN
04DU9-DN
04DU9-1KN
1.544 Mb/s superframe format (SF) and B8ZS without line power
1.544 Mb/s ANSI extended superframe format (ESF) without line
power
1.544 Mb/s ANSI extended superframe format (ESF) and B8ZS
without line power
6.0Y
04DU9-1SN
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone modular plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
If the AASTRA CNX causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if
you believe it is necessary.
The telephone company may make changes in its facility, equipment, operations or procedures that could affect the
operation of the AASTRA CNX. If this happens the telephone company will provide advance notice in order for you
to make necessary modifications to maintain uninterrupted service.
vi
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory information
If you experience trouble with this equipment, please contact Aastra Telecom for repair and warranty information. If
there is a problem with the network, the telephone company may request that you remove the equipment from the
network until the problem is resolved.
Aastra Telecom recommends that you install an AC surge protector in the AC outlet to which the equipment is
connected. This helps to prevent damage to the equipment caused by local lightning strikes or other electrical surges.
THE AASTRA CNX HAS NO USER SERVICEBLE PARTS.
FCC and telephone company procedures and requirements
In order to connect this equipment to the network, you must provide the local telephone company with the registration
number of this equipment, and you must order the proper connections.
To order the proper service, provide the telephone company with the following information:
•
•
•
Number of required jacks and their USOC numbers
Sequence in which the trunks are to be connected
Facility interface codes, by position
CSA certification - U.S. and Canada
This equipment has been certified by CSA for use in the U.S. and Canada to the requirements of UL 1950. Third
Edition - Safety of Information Technology Equipment. Including Electrical Business equipment and Canadian
Standards Association CAN/CSA C22.2 No. 950-95 Third Edition.
Canadian requirements
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (Aastra CNX) does not exceed the Class A limits for radio-noise emissions from digital
apparatus, as documented in the Radio Interference Regulations of the Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des Communications
Cet appareil numérique (Aastra CNX) respecte les limites de bruits radioélectriques visant les appareils numériques
de classe A prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du
Canada.
Canada CS-03 rules and regulations
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment
Technical Specifications. This is confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications were met.
It does not imply that Industry Canada approved the equipment.”
NOTE: The Canadian Department of Communications label identifies certified equipment. The certification means
that the equipment meets certain telecommunications network protective, operational, and safety requirements. The
Department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, ensure that it is permissible to connect to the facilities of the local
telecommunications company. You must install this equipment using an acceptable connection method.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Regulatory information
Repairs to certified equipment should be made by a supplier-designated representative. If you make repairs or
alterations to this equipment, or if the equipment malfunctions, the telecommunications company may request that
you disconnect the equipment.
You should ensure, for your own protection, that the electrical ground connections for the power utility, telephone
lines, and internal water-pipe system, if present, are connected. This precaution may be particularly important in rural
areas.
CAUTION: You should not attempt to make such connections. You should contact the appropriate inspection
authority or electrician.
Canada CS-03 Règles et règlements
« AVIS : Le présent matériel est conforme aux spécifications techniques d’Industrie Canada
applicables au matériel terminal. Cette conformité est confirmée par le numéro
d'enregistrement. Le sigle IC, placé devant le numéro d'enregistrement, signifie que
l’enregistrement s’est effectué conformément à une déclaration de conformité et indique que
les spécifications techniques d'Industrie Canada ont été respectées. Il n’implique pas
qu’Industrie Canada a approuvé le matériel. »
NOTE: L’étiquette du ministère des Communications du Canada indique que l’appareillage est certifié, c’est-à-dire
qu’il respecte certaines exigences de sécurité et de fonctionnement visant les réseaux de télécommunications. Le
ministère ne garantit pas que l’appareillage fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer l’appareillage, s’assurer qu’il peut être branché aux installations du service de télécommunications
local. L’appareillage doit aussi être raccordé selon des méthodes acceptées.
Les réparations de l’appareillage certifié devraient être confiées à un service désigné par le fournisseur. En cas de
réparation ou de modification effectuées par l’utilisateur ou de mauvais fonctionnement de l’appareillage, le service
de télécommunications peut demander le débranchement de l’appareillage.
Pour leur propre sécurité, les utilisateurs devraient s’assurer que les mises à la terre des lignes de distribution
d’électricité, des lignes téléphoniques et de la tuyauterie métallique interne sont raccordées ensemble. Cette mesure de
sécurité est particulièrement importante en milieu rural.
ATTENTION: Les utilisateurs ne doivent pas procéder à ces raccordements, mais doivent plutôt faire appel aux
pouvoirs de réglementation en cause ou à un électricien, selon le cas.
viii
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory information
European requirements
EMI/EN 55 022 statement
This certifies that the Aastra CNX Asterisk Network Switch is shielded against the generation of radio interference in
accordance with the application of Council Directive 89/336/EEC. Conformity is declared by the application of EN 55
022:1998 and EN 55 024:1998.
WARNING: This is a Class A product. In a residential area, this product may cause radio interference, in which case
the user may be required to take the appropriate measures.
EC declaration of conformity
This product conforms to the provisions of Council Directive’s EMC Directive (89/336/EEC), Low Voltage Directive
(73/23/EEC), and R+TTE Directive (1999/5/EC).
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Safety warnings
Safety warnings
General warnings
The following safety warnings apply:
•
•
•
Mechanical hazards and electrical shock hazards are possible if you remove one or more of the modules. There
are no operator-serviceable modules. Only qualified personnel should service this equipment.
This equipment must be connected to a protective ground according to the instructions in this manual. Improper
grounding may result in electrical shock.
This equipment does not provide safety isolation between any port that is connected to a digital network
termination point or any port to which terminal equipment is connected.
•
•
•
The wall circuit breaker provides the main protection for this equipment.
Ensure that rack installation does not result in airflow blockage to power supply vents or chassis vents.
Before installing the Aastra CNX rackmount version, ensure that the rack is sturdy and well-secured.
Lithium battery caution
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.
ATTENTION: Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec
une batterie du même type ou d’un type recommandé par le constructeur. Mettre au rebut les batteries usagées
conformément aux instructions du fabricant.
Compliances
The Aastra CNX is in compliance with regulations as follows:
•
•
•
•
•
•
•
•
•
•
•
Environmental
32-104° F (0-40° C)
Humidity 10-85% non-condensing
400 BTUs/hour
28 dBA maximum acoustic noise
Safety Certifications
cUL 950, NTRL/UL 1950, TUV EN 60 950
Telecom Approvals
FCC Part 68, Industry Canada, CTR4
EMI/RF
FCC Part 15 Class A, EN55022 Class A (CISPR), EN55024
x
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Software licensing and copyright
Software licensing and copyright
The Aastra CNX product consists of an Aastra designed hardware platform
distributed with embedded Linux operating system and application software. This
embedded software consists of multiple Aastra and third party programs; each
individual program may be subject to one or more Copyrights or Software
Licenses; the overall aggregation and distribution of these separate programs is
protected as a collective work, Copyright © Aastra Telecom Inc. 2005.
Use and distribution of the CNX product are deemed to be acceptance of the
Software Licensing terms contained within the Aastra CNX Service Level
Agreement. Associated third party license agreements and applicable Open
Source software licenses are incorporated by reference; the full text of all licenses
can be found on the Aastra CNX documentation CDROM.
The following is a list of Aastra CNX software licenses. See the Aastra CNX
documentation CD for more information about these licenses.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Aastra SLA 1.5
Copying GPLv2
Netfilter-licensing
Asterisk credits
LINUX note
Apachev11
APLv11
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PWLIB
PCMCIA CS
BSD
Syslogd Klogd
Copying.LIB LGPL 2v1
GLIBC
Sendmail
OpenORB
WU-ftpd
EXOLAB
Xinetd
MPLv1
Ntpd
MPLv11
OpenSSL
OpenH323
LINUX PAM
Sun Microsystems
Popt X11
BerkleyDB
LFS bootscripts
Octasic Device Enabling
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Introduction
Congratulations!! You have purchased a highly functional, cost-effective,
easy-to-use Aastra CNX Conference Network Switch for use in your network.
The Aastra CNX is easy to install and operate, and provides a comprehensive set
of security features you would expect from a state-of-the-art call conferencing
product.
What does the Aastra CNX do?
The Aastra CNX is a conference network switch that provides:
•
High quality voice conferences for up to 30 participants in up to 15 active
conferences, upgradable to 60 participants and 30 active conferences, or 120
participants and 60 active conferences.
•
•
Allows for permanent and scheduled conferences
Comprehensive conference controls for host and participants using a simple
touch-tone telephony interface
•
•
Simple to install, configure, manage, and use through an intuitive web
interface
Integrates with existing office systems: connects to Private branch exchange
(PBX) using ISDN PRI and IP PBXs using SIP or H.323
•
•
Comprehensive security features
Cost-effective conferencing for small to medium-size enterprises
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Introduction
What is in the Aastra CNX shipping package?
The Aastra CNX is carefully and securely packaged within the shipping container.
Upon opening the shipping package, inventory the contents to be sure there are no
missing or damaged parts. The following parts are included:
•
•
•
•
One Aastra CNX unit
One Power cable (for connection to AC power source)
One DB-9 to DB-9 console cable
One CompactFlash memory card that contains the software required to
operate the unit (for use in CompactFlash memory slot 1)
•
•
•
One set of rack mounting brackets with six Phillips head screws
One Aastra CNX Technical Documentation CD ROM
One CD ROM envelope with License Key label
For a list of additional parts that you need to install the Aastra CNX (which are not
included in the shipping package), see the section, “Aastra CNX Installation and
Setup Procedures” on page 1.
1
2
3
4
POWER
STATUS
1
2
ACTIVE
ALARM
CNX
10/100 ENET
T1
/
E1
1
2
COMPACTFLASH
Aastra CNX unit
Console cable
Power cable
CompactFlash card
License Key: 996-555-1e9-f6
License Key: 996-555-1e9-f6
License Key: 996-555-1e9-f65-421-e85
License Key
Rack mounting brackets with
Phillips head screws
CD ROM envelope with
license key label
Technical documentation CD ROM
xiv
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX
Installation and Setup Procedures
Procedures
Introduction
This section provides quick installation and setup procedures for installing and
starting up the Aastra CNX Conference Network Switch. This section also
provides a list of additional parts that you need to install the Aastra CNX.
References
For information about configuring and using the Aastra CNX, see related
documentation on the Aastra CNX Conference Network Switch Documentation
CD.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Preparing for the hardware installation
Prepare for hardware installation
1
What you need for a single installation
One Aastra CNX unit
One AC power cable
One CompactFlash memory card
One set of rack mounting brackets with six (6) Phillips head screws
Truss head screws (not provided)
One to four RJ-48C T1/E1 cable(s) (not provided)
NOTE: T1/E1 Ports 1 and 2 are available for the 30-port unit and the 60-port unit.
One 9-pin male DB-9 to female DB-9, RS-232 serial cable
One or two RJ-45 10/100BaseT Ethernet cable(s) (not provided)
(Optional) One 9-pin male DB-9 to female DB-25, RS-232 serial cable for
modem connections (not provided)
*Tools required for rackmount installations
In addition to the parts listed above, the following tools are also required
when installing an Aastra CNX rackmount unit:
#2 Phillips screwdriver
Torque wrench
Nutdriver set
Check the shipping contents
Upon opening the shipping package, inventory the contents to be sure there are no missing
or damaged parts, as described in the Welcome section of this document.
Determine location of Aastra CNX (desktop or rackmount)
a. If you are installing the Aastra CNX as a desktop unit, place it on a flat surface in close proximity
to your PC, skip Step 2, and perform Steps 3 through 8.
b. If you are installing the Aastra CNX as a rackmount unit, proceed to Step 2.
2
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
Installing the Aastra CNX in a rack
Install the Aastra CNX in a rack
2
Warning: Before you install the Aastra CNX unit in a rack, ensure that the rack is sturdy and well
secured.
Caution: The operating environment must provide unobstructed front-to-back airflow to the chassis
mounted in a rack.
To install an Aastra CNX in a rack:
a. Mount the rackmount brackets to the
Aastra CNX unit in a flush-mount position using
the 6 Phillips head screws.
b. Align the bracket holes to the rack and
insert truss-head screws (not provided).
c. Tighten the screws to 15 in-lb (.69 Nm).
1
2
3
4
POWER
STATUS
1
2
ACTIVE
ALARM
CNX
10/100 ENET
T1
/
E1
1
COMPACTFLASH
2
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Connecting to the console port
Connect to the console
3
Console port parameters
Parameter Value
You can access the Aastra CNX console locally or remotely. Ensure that you
configure your terminal or PC (terminal emulator) console port parameters.
Baud rate
Flow control None
Data bits
Stop bits
Parity
9600
Local connection
To connect a local PC or terminal:
a. Attach the 9-pin male DB-9 connector on the serial cable to the
female console port on the rear panel of the Aastra CNX.
b. Attach the 9-pin female connector on the serial cable to the male console
port on the back of your PC or terminal.
8
1
None
Remote connection
To connect a remote PC and an Aastra CNX to an Ethernet LAN:
a. Attach one end of an Ethernet cable to the Ethernet port on the PC, and the other end to a LAN port.
b. Attach one end of an Ethernet cable to an Ethernet port on the back panel of the Aastra CNX,
and the other end to a LAN port.
To connect a modem:
a. Attach the 9-pin male connector on the serial cable to the female console port on the rear panel of the
Aastra CNX.
b. Attach a 25-pin male connector on the modem cable to the modem's DB-25 RS-232 port.
DB-9 port on PC
PC or terminal
Aastra CNX
10/100 ENET
T1 / E1
1
2
3
4
CONSOLE
RESET
1
2
100-240VAC
1.0A 47-63HZ
Ethernet LAN
Console port
DB-9 to DB-9 console cable
Modem (AT or Hayes compatible)
DB-25 RS-232 port
To console port
on Aastra CNX
NMS
PHONE
DIAL
DTE
(LEASE
3810
(LEASED)
3810
DWR
DB-9 to DB-25 modem cable
4
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
Connecting the network cables
Connect network cables
4
Make sure you have the network cables that you need for your facility, and connect them to the
following interfaces as appropriate:
T1/E1 Connect the RJ-48C T1/E1 cable(s) to the RJ-48C T1/E1 port(s) on the rear panel of the
Aastra CNX .
Ethernet Connect the RJ-45 Ethernet UTP cable(s) to the RJ-45 10/100 ENET port(s) on
the rear panel of the Aastra CNX.
10/100 ENET
T1 / E1
1
2
3
4
1
2
CONSOLE
RESET
100-240VAC
1.0A 47-63HZ
Ethernet RJ-45
connectors
T1/E1 RJ-48C
connectors
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Connecting the AC power cable
Connect the power cable
5
Ground the chassis
a. Locate the 3-hole, female, power receptacle on the rear of the chassis.
b. Plug the male, 3-prong connector on the power cable into the power receptacle.
c. Insert the plug at the other end of the power cable into a grounded power source (100 to 240 VAC).
NOTE: North America: 120 V at 15 A
Europe: 240 V at 10 A
10/100 ENET
T1 / E1
1
2
3
4
1
2
CONSOLE
RESET
100-240C
1.0A 4
AC power cord
Connect to a grounded 15 A
power source (100 to 240 VAC).
(North America: 120 V at 15 A)
(Europe: 240 V at 10 A)
6
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
Starting up and checking the Aastra CNX
Startup and check the Aastra CNX
6
Apply power to the Aastra CNX
To start up the Aastra CNX, insert the CompactFlash card into slot 1 of the unit and apply power
from the power source.
Powering up a new Aastra CNX:
Starts diagnostic test routines on the Aastra CNX.
Checks for a flash memory card in CompactFlash slot 1 of the Aastra CNX chassis.
Initializes the Aastra CNX and, if successful, resets all LEDs to their normal state.
Starts a one-time software script that allows you to setup your network settings (See Step 7).
Check the LEDs
a. Check the common LEDs on the front panel.
The Power and Status LEDs should be ON (green)
indicating the Aastra CNX is ready to take calls.
1
2
3
4
1
2
POWER
STATUS
ACTIVE
ALARM
b. Check the ENET LEDs on the front panel.
If your Aastra CNX has a physical Ethernet link to your
network from the 10/100 ENET ports 1 or 2 on the back
panel, and no alarms are present, the ENET LEDs
1 and/or 2 should be ON (green).
10/100 ENET T1 / E1
NOTE: The ENET LEDs FLASH (green) when
there is Rx/Tx activity.
c. The T1/E1 ports are disabled by default in the
Aastra CNX software configuration. The top row of T1/E1
LEDs should be OFF. To enable these ports and check the
LEDs, the System Administrator must enable the
T1/E1 ports using the Aastra CNX GUI.
Alarm Indicators
a. Check that the Status LED is not ON Red. If the Status LED is
ON Red, an alarm condition exists in the unit. Contact your System Administrator.
NOTE: During bootup of the Aastra CNX, the Status LED is ON Red
for 1 second. This is a normal condition at bootup.
b. When the T1/E1 port(s) are enabled, check that the T1/E1 LEDs
on the bottom row are OFF. If the T1/E1 LED(s) on the bottom row are ON Amber,
a yellow alarm is present on the T1/E1 link. If the T1/E1 LEDs are ON Red, a
Red alarm is present on the T1/E1 link. Contact your System Administrator.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Configuring the network settings
Configure the network settings
7
Requirements
The following is required before you configure the Aastra CNX for the first time:
•
The Aastra CNX must physically be connected to your console using an
RS-232/DB-9 cable.
•
The Aastra CNX must physically be connected to your network interface via the Ethernet
port(s).
•
•
The Aastra CNX must be turned on.
You must be running a terminal emulator on your PC. Terminal emulator must be set as
follows:
— Baud Rate
— Data
9600
8 bit
None
1 bit
— Parity
— Stop
— Flow Control None
The Aastra CNX setup script allows you to configure the following:
(1) Run network and time configuration
The following procedure describes how to configure the network settings.
Note: If at any time during the initial configuration process, you want to
backout of the configuration, press <ESC> to cancel.
8
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
(1) Run network and time configuration
Use the following procedure to initially configure the network settings on the Aastra CNX
hardware.
Step Action
1
After first-time power up of the CNX, the following displays in a terminal window:
Welcome to the
Aastra CNX - Conference Bridge
Configuration Utility
- please press <enter> to continue -
2
3
Press <Enter>.
The following displays:
Hostname:
Enter the hostname for the Aastra CNX and press <Enter>. For example:
Hostname: cnx1 ↵
The following displays:
Configuring ENET #1...
IP Address:
4
Enter the IP address for the Ethernet port for which you want to use as a management interface, and
press <Enter>. For example:
IP Address: 192.168.2.6 ↵
The following displays:
Netmask:
5
Enter the Netmask for the Ethernet port for which you want to use as a management interface, and
press <Enter>. For example:
Netmask: 255.255.255.0 ↵
The following displays:
Default Gateway:
(continued)
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Step Action
6
Enter “y” if the network information is correct, and press <Enter>.
Enter “n” if the network information is incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat steps 3 through 7 to correct the network
information, and then enter “y” at step 8.
The following message and prompt display (after entering “y” at the verification prompt):
Configuring Domain Name Service (DNS)...
Domain Name:
7
Enter the Default Gateway for the Ethernet port for which you want to use as a management
interface, and press <Enter>. For example:
Default Gateway: 192.168.2.1 ↵
The following displays:
Before the following information is configured, please verify the
information below is correct before proceeding.
Hostname:
cnx1
IP Address:
Broadcast Address:
Netmask:
192.168.2.6
192.168.2.255
255.255.255.0
Default Gateway:
192.168.2.1
Is this correct (y/n):
8
Enter “y” if the network information is correct, and press <Enter>.
Enter “n” if the network information is incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat steps 3 through 7 to correct the network
information, and then enter “y” at step 8.
The following message and prompt display (after entering “y” at the verification prompt):
Configuring Domain Name Service (DNS)...
Domain Name:
(continued)
10
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
Step Action
9
Enter the domain name for the Aastra CNX and press <Enter>. For example:
Domain Name: aastra.com ↵
The following prompts display:
Nameserver #1:
Nameserver #2:
10
Enter the IP address of the DNS servers for the Aastra CNX and press <Enter>. For example:
Nameserver #1: 192.167.2.11 ↵
Nameserver #2: 192.168.2.12 ↵
The following message and prompts display:
Before the following information is configured, please verify the
information below is correct before proceeding.
Domain Name:
aastra.com
Nameserver #1:
Nameserver #2:
192.167.2.11
192.168.2.12
Is this correct (y/n):
(continued)
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Step Action
11
Enter “y” if the DNS information is correct, and press <Enter>.
Enter “n” if the DNS information is incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat steps 9 and 10 to correct the DNS
information, and then enter “y” at step 11.
The following message and prompts display (after entering “y” at the verification prompt):
Unpacking timezones, please wait one moment...
Timezone Configuration
Africa
America
Antarctica EET
Arctic
Asia
Atlantic
Australia Eire
Brazil
CET
CST6CDT
Canada
Chile
Cuba
GMT
Jamaica
Japan
Kwajalein PST8PDT
Navajo
PRC
US
UTC
Universal
W-SU
WET
Zulu
GMT+0
GMT-0
GMT0
Greenwich MET
HST
Hongkong
Iceland
Indian
Iran
EST
EST5EDT
Egypt
Libya
Pacific
Poland
Portugal
ROC
MST
MST7MDT
Mexico
Mideast
NZ
Etc
Europe
GB
ROK
Singapore
Turkey
UCT
GB-Eire
Israel
NZ-CHAT
Enter a choice, "back" to go up one level, or "cancel" to cancel:
12
Enter your local timezone and press <Enter>. For example:
Enter a choice, "back" to go up one level, or "cancel" to cancel:EST ↵
Note: Some of the options in the Timezone Configuration list display an additional list of options. For
example, if you select “America” from the Timezone Configuration list, another list of options displays
for timezones in America.
The following message and prompt displays:
Timezone: EST
Are you sure? (y/n)
(continued)
12
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
Step Action
13 Enter “y” if the timezone is correct, and press <Enter>.
Enter “n” if the timezone is incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat step 12 to correct the timezone, and then
enter “y” at step 13.
The following message and prompts display (after entering “y” at the verification prompt):
Please enter the date and time:
Four-digit year [2005]:
Month [03]:
Day [09]:
Hour [19]:
Minutes [40]:
14
The defaults for the date and time are the current date and time on your PC.
If these defaults are correct, press <Enter> at each prompt without making an entry.
If a default is incorrect, enter the correct value and press <Enter> to continue. In the following
example, 14 is entered for the hour since the default of 19 is incorrect.
Four-digit year [2005]:
Month [03]:
Day [09]:
Hour [19]: 14
Minutes [40]:
The following displays:
Before the following information is configured, please verify the
information below is correct before proceeding.
Date: 2005-03-09 14:40:00
Is this the correct time (y/n) [n]:
(continued)
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Step Action
15
Enter “y” if the date and time are correct, and press <Enter>.
Enter “n” if the date and time are incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat step 14 to correct the date and time, and
then enter “y” at step 15.
The following message displays (after entering “y” at the verification prompt):
Configuring Network Time Protocol (NTP)...
You can configure up to 4 NTP servers. To remove an existing
server, set it's address to 0.0.0.0. If no valid servers are
given then ntp will be disabled.
Do you want to continue (y/n) [n]:
16
Enter “y” to continue, and press <Enter>.
The following prompts display:
NTP Server #1: [pool.ntp.org]:
NTP Server #2: [pool.ntp.org]:
NTP Server #3: [pool.ntp.org]:
NTP Server #4: [pool.ntp.org]:
(continued)
14
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Installation and Setup Procedures
Procedures
Step Action
17
Enter up to four NTP servers in your network, and press <Enter>. For example:
NTP Server #1: [pool.ntp.org]: 192.167.2.11 ↵
NTP Server #2: [pool.ntp.org]: 192.167.2.12 ↵
NTP Server #3: [pool.ntp.org]: 0.0.0.0 ↵
NTP Server #4: [pool.ntp.org]: 0.0.0.0 ↵
Notes:
1. You can enter up to four NTP servers. If you have fewer than four NTP servers, enter the
IP address(es) for the NTP servers that you have, and then enter 0.0.0.0 for the remaining
NTP entries.
2. If you do not have your own NTP server, and the Aastra CNX has Internet connectivity,
you may use the default server entry of pool.ntp.org.
3. Aastra Telecom strongly recommends the use of NTP servers, either your own or the
default servers. NTP servers avoid clock slippage and inconsistent conference
start times on the Aastra CNX. However, you may completely disable the NTP
server feature by setting the IP address of all four servers to 0.0.0.0.
The following displays:
Before the following information is configured, please verify
the information below is correct before proceeding.
NTP Server #1 : 192.167.2.11
NTP Server #2 : 192.167.2.12
Is this information correct (y/n)[n]:
18
Enter “y” if the NTP information is correct, and press <Enter>.
Enter “n” if the NTP information is incorrect, and press <Enter>.
Note: If you entered “n” at the verification prompt, repeat step 17 to correct the NTP information, and
then enter “y” at step 18.
The following message displays (after entering “y” at the verification prompt):
The conference bridge has now been configured, the system will now reboot
to reflect the changes.
19
You have successfully initialized the Aastra CNX.
When you have completed initializing and configuring the Aastra CNX, go to Step 8, “Using the
Aastra CNX GUI via the Web” on page 16. For more information about logging in, see the Aastra
CNX System Administrator Guide.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Quick Installation and Setup Guide
Procedures
Using the Aastra CNX GUI via the Web
Using the Aastra CNX GUI via the Web
8
To begin using the Aastra CNX GUI via the Web interface:
Important: The JRE allows you to use the Aastra CNX graphical user interface (GUI) to configure, manage,
and maintain the Aastra CNX. You must have JRE installed in order to use the Aastra CNX GUI.
If your PC (running Windows) is connected to the Internet, the JRE automatically installs
(if not already installed) when accessing the Aastra CNX GUI.
If you do not have access to an Internet connection OR if you are using the Aastra CNX in
a Linux environment, you must acquire the applicable JRE and install it manually before using
the Aastra CNX GUI.
a. Open your web browser and enter the URL or IP address of the Aastra CNX. For example:
or
b. Enter the username and password provided by the System Admininstrator.
Note: Default username and password for System Administrators is "cnxadmin".
c. Enter the Aastra CNX License Key and click APPLY.
The License Key can be found on the label located on the Documentation CD ROM envelope.
The Aastra CNX reboots. Close your web browser and wait a few minutes before logging in again.
d. Repeat steps a. and b. when the reboot is complete.
e. Change the default password by clicking the "Change Password" button.
f. Configure the Aastra CNX and/or schedule conferences as required.
Note: Available tasks are dependent on whether you are a System Administrator or Registered User.
Additional Notes:
1. After port upgrades and major software releases on the Aastra CNX, a System Administrator
must enter a new license key to activate the software. See the Aastra CNX System Administrator
Guide for more details.
2. The CNX performs an automatic reboot as part of an upgrade process.
For configuration details (System Administrators only)
See the Aastra CNX Conference Network Switch System Adminstrator Guide provided on
the Aaster CNX Conference Network Switch Documentation CD.
All documentation is provided in PDF format
For troubleshooting
If you are having problems using your Aastra CNX, contact your reseller or Aastra Telecom Technical Support.
16
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra CNX Conference Network Switch
Installation and Setup Guide
Printed in the USA
ATP-CNX-020
Aastra CNX Release 1.2, Document Revision 01.06
July 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
|