instruction manual
TX-CT5
Classroom Transmitter
Transmitters
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Product Information .................................................................................................1
Local Mode............................................................................................................................... 3
Media Mode ............................................................................................................................. 3
Calls ......................................................................................................................................... 4
System Media Control....................................................................................................... 4
Motion ...................................................................................................................................... 4
Laser Disc ................................................................................................................................ 4
CD-I Player............................................................................................................................... 5
1
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Information
Product Information
The AMX Synergy Classroom Transmitter (TX-CT5) provides a full range of control options for
the AMX Synergy Resource Management System (RMS). It transmits Infrared (IR) format
commands to classroom Television Managers.
TX-CT5 Specifications
Dimensions (HWD): 5.25" (133 mm) x 6.26" (159 mm) x 0.75" (19.05 mm)
Weight:
8.4 oz (213.3 grams)
38 kHz - 455 kHz
Frequency:
Frequency options: • High-frequency IR (455 kHz) avoids interference with electronic ballasts
• Optional low frequency (38 kHz) to operate with existing AXB-TM installations
LED indicators:
Power:
Six high-output IR LEDs
Four 1.5 VDC N-size batteries
Enclosure:
Buttons:
High-impact molded enclosure
• ALT and OPTION buttons select special control options
• LOCAL button selects local video source for receivers/monitors
Setting the IR Frequency
1. Remove the battery cover.
2. Set the DIP switch for the correct IR frequency
ꢀ
ꢀ
Set the switch position down for 455 kHz.
Set the switch position up for 38 kHz.
1
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Information
2
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TX-CT5
Using the TX-CT5
Television Control
The TV control buttons operate the classroom television. The following functions are always
available:
ꢀ
ON/OFF turns on or off the classroom television power.
ꢀ VOLUME controls the television volume. Press the up or down arrows to manipulate the
volume.
ꢀ
ꢀ
MUTE activates or deactivates the volume mute option.
OPTION accesses optional control functions for local television display. Press OPTION
B, one of the following number buttons, then ENTER:
1
2
3
Line 1 select
Line 2 select
Closed Caption on/off
ꢀ
The following functions are for televisions with a local VCR connected to the same
AXB-TM:
4
5
6
7
9
Tracking up
Tracking down
Reset counter
Clear
Text display on/off
Modes
The TX-CT5 has two operation modes: Local Mode and Media Mode.
Local Mode
The Local Mode is active whenever one of the following occurs:
ꢀ
ꢀ
ꢀ
There is no media scheduled to that classroom.
Press SOURCE
Press SOURCE
(up) to select the next instructional channel.
(down) to select the previous instructional channel.
Media Mode
The Media Mode is active whenever there is a media source, broadcast channel, or media plan
scheduled to a classroom. You can select up to 10 sources.
ꢀ
Press SOURCE
(up) to pause current media, select next source assignment, and
play assigned media source.
ꢀ Press SOURCE (down) to pause current media, select previous source assignment,
and play assigned media source.
3
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TX-CT5
Office, Security, or Media Center Control
Calls
There are two different kinds of calls that you can send:
ꢀ
Office: To send a general emergency call signal to the Paging Console (AXP-PC) or to a
Security Panel (AXU-SPL4) press OFFICE then ENTER. To clear the call before you
receive a response press OFFICE then CLEAR.
ꢀ Media: To send a general call to the media center's computer press MEDIA then ENTER.
System Media Control
The TX-CT5 has a standard set of motion control buttons located on the right side.
Motion
To control the motion of the media, use the following seven buttons:
PLAY
STOP
PAUSE
FFWD (Fast forward)
REV (Rewind)
FWD (Step forward)
REV (Step reverse)
Laser Disc
The selected source must accept a Chapter command.
ꢀ Chapter: To play a specific chapter, press CHAPTER, the chapter number then ENTER.
ꢀ
ꢀ
ꢀ
Frame: To play a specified frame, press FRAME, the fame number, then ENTER.
Clear: To cancel commands, press CLEAR, then ENTER.
Audio: To control audio, press ALT and one of the following number buttons:
1
2
3
4
5
6
7
8
9
0
Left channel (analog)
Right channel (analog)
Both channels
All channels mute (analog)
Left channel (digital)
Right channel (digital)
Both channels (digital)
All channels mute (digital)
Text display on
Side A/B select (if available)
4
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TX-CT5
VCR
1. To access an optional feature, press ALT,
2. Then, choose one of the following number buttons and press ENTER:
4
5
6
7
9
Tracking up
Tracking down
Reset counter
Clear
Text display on/off
CD-I Player
To control the CD-I mouse, use the buttons labeled in yellow. Then, press one of the eight outer
number buttons (1 – 4 or 6 – 9). Select from four mouse speeds.
5 increases mouse speed while 0 decreases it.
To activate CD-I functions:
ꢀ
Press the right button (ENTER) or the left button (CLEAR) to activate the first CD-
I function button.
ꢀ
Press the right
button (FRAME) or the left
button (CHAPTER) to activate the
second CD-I function button.
Computer
To control the CD-I mouse, use the buttons labeled in yellow. Then, press one of the eight outer
number buttons (1 – 4 or 6 – 9). For information on the Speed and how to activate functions refer to
the CD-I Player subsection.
Slides
To control video slide projectors and still video players, use the following buttons::
PLAY (slides on)
STOP (slides off)
PAUSE (still video standby)
FFWD (zoom in)
REV (zoom out)
FWD (forward)
REV (reverse)
5
TX-CT5 Classroom Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
AMX reserves the right to alter specifications without notice at any time.
brussels • dallas • los angeles • mexico city • philadelphia • shanghai • singapore • tampa • toronto • york
3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993
Download from Www.Somanuals.com. All Manuals Search And Download.
|