AEG Cooktop HK854220FB User Manual

HK854220FB  
EN INDUCTION HOB  
USER MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
3
CONTENTS  
4 Safety information  
5 Installation instructions  
7 Product description  
8 Operating instructions  
12 Helpful hints and tips  
14 Care and cleaning  
14 What to do if…  
16 Environment concerns  
The following symbols are used in this user  
manual:  
Important information concerning your  
personal safety and information on how to  
avoid damaging the appliance.  
General information and tips  
Environmental information  
Subject to change without notice  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Safety information  
SAFETY INFORMATION  
For your safety and correct operation of the appliance, read this manual carefully before  
the installation and use. Always keep these instructions with the appliance also if you move  
or sell it. The users must fully know the operation and safety functions of the appliance.  
Children and vulnerable people safety  
WARNING!  
Do not let persons, children included, with reduced physical sensory, reduced mental func-  
tions or lack of experience and knowledge to use the appliance. They must have supervision  
or instruction for the operation of the appliance by a person who is responsible for their  
safety.  
• Keep all packaging away from children. There is the risk of suffocation or injury.  
• Keep the children away from the appliance during and after the operation, until the ap-  
pliance is cold.  
WARNING!  
Activate the child safety device to prevent small children and pets from an accidental acti-  
vation of the appliance.  
Safety during operation  
• Remove all packaging, stickers and layers from the appliance before the first use.  
• Set the cooking zones to "off" after each use.  
• The risk of burns! Do not put the objects made of metal, for example cutlery or saucepan  
lids, on the surface that you cook. They can become hot.  
• The Users with an implanted pacemaker must keep their upper body minimum 30 cm  
from induction cooking zones that are activated.  
WARNING!  
Fire risk! Too hot fats and oils can occur with ignition very quickly.  
Correct operation  
• Always monitor the appliance during operation.  
• The appliance is only for domestic use!  
• Do not use the appliance as a work or a storage surface.  
• Do not put or keep very flammable liquids and materials, easy fusible objects (made of  
plastic or aluminium) on or near the appliance.  
• Be careful when you connect the appliance to the near sockets. Do not let the electricity  
bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.  
How to prevent a damage to the appliance.  
• If the objects or cookware fall on the glass, the surface can be damaged.  
• Cookware made of cast iron, cast aluminium or with damaged bottoms can cause  
scratch of the glass. Do not move them on the surface.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
5
• Do not let cookware boil dry to prevent the damage to cookware and glass .  
• Do not use the cooking zones with empty cookware or without cookware.  
• Do not put the aluminium foil on the appliance.  
• Make sure that the airflow space of 5 mm between the worktop and front of the unit  
below it stays opened.  
WARNING!  
If there is a crack on the surface, disconnect power supply to prevent the electrical  
shock.  
INSTALLATION INSTRUCTIONS  
Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The  
rating plate of the appliance is on its lower casing.  
HK854220FB  
949 595 085 00  
220-240 V 50-60-Hz Induction 7,4 kW  
7,4 kW  
58 GBD C2 AU  
AEG  
The Safety Instructions  
WARNING!  
You must read these!  
Make sure that the appliance is not damaged because of transportation. Do not connect a  
damaged appliance. If it is necessary, speak to the supplier.  
Only an authorised servicing technician can install, connect or repair this appliance. Use on-  
ly original spare parts.  
Only use the built-in appliances after you assemble the appliance into correct built-in units  
and work surfaces that align to the standards.  
Do not change the specifications or change this product. Risk of injury and damage to the  
appliance.  
Fully obey the laws, ordinances, directives and standards in force in the country where you  
use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!  
Keep the minimum distances to other appliances and units!  
Install shock protection, for example install the drawers only with a protective floor directly  
below the appliance!  
Keep safe the cut surfaces of the worktop from moisture with a correct sealant!  
Seal the appliance to the work top with no space between with a correct sealant!  
Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher or  
oven!  
Do not install the appliance adjacent to doors and below windows! If not, when you open  
the doors or windows they can push off hot cookware from the appliance.  
WARNING!  
Risk of injury from electrical current. Carefully obey the instructions for electrical connec-  
tions.  
• The electrical mains terminal is live.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Installation instructions  
• Make electrical mains terminal free of voltage.  
• Install correctly to give shock protection.  
• Loose and incorrect plug and socket connections can make the terminal become too hot.  
• A qualified electrician must install the connections in the clamps correctly.  
• Use a strain relief clamp on cable.  
• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or  
two phase connection.  
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or  
higher). Speak your local Service Centre.  
The appliance must have the electrical installation which lets you disconnect the appliance  
from the mains at all poles with a contact opening width of minimum 3 mm.  
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses  
removed from the holder), earth leakage trips and contactors.  
Assembly  
min.  
500mm  
min.  
50mm  
min.  
50mm  
min.  
5mm  
R 5mm  
490+1mm  
600mm  
750+1mm  
min.  
38 mm  
min.  
25 mm  
min.  
5 mm  
min.  
5 mm  
min.  
20 mm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product description  
7
If you use a protection box (the additional acces-  
sory), the front airflow space of 5 mm and protec-  
tive floor directly below the appliance are not  
necessary.  
PRODUCT DESCRIPTION  
General overview  
1 Induction cooking zone 1800 W, with  
Power function 2800 W (minimum  
cookware diameter = 145 mm).  
1
2
2 Induction cooking zone 2400 W, with  
Power function 3700 W (minimum  
cookware diameter = 210 mm).  
180  
mm  
300  
mm  
3 Control panel  
180  
145  
4 Induction cooking zone 1400 W, with  
Power function 2500 W (minimum  
cookware diameter = 125 mm).  
mm  
mm  
5
4
3
5 Induction cooking zone 1800 W, with  
Power function 2800 W (minimum  
cookware diameter = 145 mm).  
Control panel layout  
1
2
3
4
5
10  
9
8
7
6
Use the sensor fields to operate the appliance The displays, indicators and sounds tell which  
function operate.  
sensor field  
function  
It activates and deactivates the appliance.  
It locks/unlocks the control panel.  
1
2
3
cooking zones' indicators of timer  
It shows for which cooking zone you set the time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Operating instructions  
sensor field  
function  
It shows the time in minutes.  
It activates the Power function.  
It shows the heat setting.  
the timer display  
4
5
a heat setting display  
6
a control bar  
/
To set the heat setting.  
7
It increases or decreases the time.  
It selects the cooking zone.  
It activates and deactivates STOP+GO  
8
9
10  
Heat setting displays  
Display  
Description  
The cooking zone is deactivated.  
The cooking zone operates.  
The function operates.  
-
The Automatic Heat Up function operates.  
Power function operates.  
There is a malfunction.  
+ digit  
OptiHeat Control (3 step Residual heat indicator) : continue cook /  
stay warm / residual heat.  
/
/
Lock/The Child Safety functions operates.  
Not correct cookware or too small or no cookware on the cooking  
zone.  
The Automatic Switch Off function operates.  
OptiHeat Control (3 step Residual heat indicator)  
WARNING!  
\
\
The risk of burns from residual heat!  
OptiHeat Control shows the level of the residual heat. The induction cooking zones make  
the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is  
hot from the heat of the cookware.  
OPERATING INSTRUCTIONS  
Activation and deactivation  
Touch  
for 1 second to activate or deactivate the appliance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating instructions  
9
Automatic Switch Off  
The function stops the hob automatically if:  
• All cooking zones are deactivated.  
• You do not set the heat setting after you activate the appliance.  
• You spill something or put something on the control panel for more than 10 seconds, (a  
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove  
the object or clean the control panel.  
• The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the hob  
again, the cooking zone must be cool.  
• You use not correct cookware. The symbol  
vates automatically after 2 minutes.  
comes on and the cooking zone deacti-  
• You do not deactivate a cooking zone or change the heat setting. After some time,  
comes on and the appliance deactivates. See the table.  
The times of Automatic Switch Off  
Heat setting  
-
-
-
-
The cooking zone  
deactivates after  
6 hours  
5 hours  
4 hours  
1.5 hours  
The heat setting  
Touch the control bar at the heat setting. Change  
to the left or the right, if it is necessary. Do not  
release before you have a correct heat setting. The  
display shows the heat setting.  
Automatic Heat Up  
12  
11  
10  
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14  
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat  
Up function. This function sets the highest heat setting for some time (see the illustration),  
and then decreases to the necessary heat setting.  
To start the Automatic Heat Up function for a cooking zone:  
1. Touch  
(
comes on in the display).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Operating instructions  
2. Immediately touch the necessary heat setting. After 3 seconds  
comes on in the dis-  
play.  
To stop the function change the heat setting.  
Power function  
The Power function makes more power available to the induction cooking zones. The Power  
function is activated for 10 minutes at most. After, that the induction cooking zone auto-  
matically sets back to highest heat setting. To activate, touch  
vate, touch a heat setting  
,
comes on. To deacti-  
-
.
Power management  
The power management divides the power be-  
tween two cooking zones in a pair (see the illus-  
tration). The power function increases the power  
to the maximum level for one cooking zone in the  
pair. Automatically decreases the power in the  
second cooking zone to a lower level. The display  
for the reduced zone change between two levels.  
Timer  
Count Down Timer  
Use the Count Down Timer to set how long the cooking zone operates for only this one  
time.  
Set the Count Down Timer after the selection of the cooking zone.  
You can set the heat setting before or after you set the timer.  
To set the cooking zone:touch  
cooking zone comes on.  
again and again until the indicator of a necessary  
To activate the Count Down Timer: touch  
of the timer to set the time (  
-
00 99  
minutes). When the indicator of the cooking zone start to flash slow, the time counts  
down.  
To see the remaining time: set the cooking zone with  
. The indicator of the cooking  
zone starts to quickly. The display shows the remaining time.  
To change the Count Down Timer:set the cooking zone with  
touch  
or  
.
To deactivate the timer: set the cooking zone with  
. Touch . The remaining time  
. The indicator of the cooking zone goes out. To deactivate you can  
counts back to  
also touch  
00  
and at the same time.  
When the countdown comes to an end, the sound operates and  
zone deactivates.  
flashes. The cooking  
00  
To stop the sound: touch  
CountUp Timer ( The count up timer)  
Use the CountUp Timer to monitor how long the cooking zone operates.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating instructions  
11  
To set the cooking zone (if more than 1 cooking zone operate):touch  
again until the indicator of a necessary cooking zone comes on.  
To activate the CountUp Timer:touch of the timer comes on. When the indicator  
of the cooking zone starts to flash slow, the time counts up. The display switches be-  
tween and counted time (minutes).  
To see how long the cooking zone operates: set the cooking zone with  
again and  
. The indica-  
tor of the cooking zone starts to flash quickly. The display shows the time that the cook-  
ing zone operates.  
To deactivate the CountUp Timer: set the cooking zone with  
deactivate the timer. The indicator of the cooking zone goes out.  
and touch  
or to  
Minute Minder  
You can use the timer as a Minute Minder while the cooking zones do not operate. Touch  
. Touch  
operates and  
or of the timer to set the time. When the time comes to an end, the sound  
flashes.  
00  
To stop the sound: touch  
STOP+GO  
The  
When  
The  
function sets all cooking zones that operate to the lowest heat setting (  
operates, you cannot change the heat setting.  
function does not stop the timer function.  
).  
To activate this function touch  
To deactivate this function touch  
. The symbol  
. The heat setting that you set before comes on.  
comes on.  
Lock  
When the cooking zones operate, you can lock the control panel, but not  
accidental change of the heat setting.  
. It prevents an  
First set the heat setting.  
To start this function touch  
The Timer stays on.  
. The symbol  
comes on for 4 seconds.  
To stop this function touch  
. The heat setting that you set before comes on.  
When you stop the appliance, you also stop this function.  
The child safety device  
This function prevents an accidental operation of the appliance.  
To activate the child safety device  
• Activate the appliance with  
. Do not set the heat settings.  
• Touch  
for 4 seconds. The symbol comes on.  
• Deactivate the appliance with  
.
To deactivate the child safety device  
• Activate the appliance with  
The symbol comes on.  
• Deactivate the appliance with  
. Do not set the heat settings. Touch  
for 4 seconds.  
.
To override the child safety device for only one cooking time  
• Activate the appliance with . The symbol comes on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Helpful hints and tips  
• Touch  
ance.  
for 4 seconds. Set the heat setting in 10 seconds. You can operate the appli-  
• When you deactivate the appliance with  
, the child safety device operates again.  
OffSound Control (Deactivation and activation of the sounds)  
Deactivation of the sounds  
Deactivate the appliance.  
Touch  
for 3 seconds. The displays come on and go out. Touch  
for 3 seconds.  
comes on, the sound is on. Touch  
,
comes on, the sound is off.  
When this function operates, you can hear the sounds only when:  
• you touch  
• the Minute Minder comes down  
• the Count Down Timer comes down  
• you put something on the control panel.  
Activation of the sounds  
Deactivate the appliance.  
Touch  
for 3 seconds. The displays come on and go out. Touch  
for 3 seconds.  
comes on, because the sound is off. Touch  
,
comes on. The sound is on.  
HELPFUL HINTS AND TIPS  
Use the induction cooking zones with correct cookware.  
Cookware for induction cooking zones  
For induction cooking zones a strong electro-magnetic field creates the heat in the cook-  
ware very quickly.  
Cookware material  
correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer  
(with correct mark from a manufacturer).  
not correct: aluminium, copper, brass, glass, ceramic, porcelain.  
Cookware is correct for an induction hob if …  
• ... some water boils very quickly on a zone set to the highest heat setting..  
• ... a magnet pulls on to the bottom of the cookware.  
The bottom of the cookwar must be as thick and flat as possible.  
Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of  
the cookware automatically to some limit.  
The noises during operation  
If you can hear  
• crack noise: cookware is made of different materials (Sandwich construction).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Helpful hints and tips  
13  
• whistle sound: you use one or more cooking zones with high power levels and the cook-  
ware is made of different materials (Sandwich construction).  
• humming: you use high power levels.  
• clicking: electric switching occurs.  
• hissing, buzzing: the fan operates.  
The noises are normal and do not refer to appliance malfunction.  
Energy saving  
• If it is possible, always put the lids on the cookware.  
• Put cookware on a cooking zone before you start it.  
Öko Timer (Eco Timer)  
To save the energy, the heater of the cooking zone deactivates before the count down timer  
signal. The difference in the operation time is depends of the heat setting level and the time  
you cook.  
The examples of cooking applications  
The data in the table is for guidance only.  
Heat  
setting  
Use to:  
Time  
Hints  
Put a lid on a cookware.  
Mix from time to time.  
Cook with a lid on.  
Keep cooked foods warm  
as nec-  
essary  
1
1-3  
1-3  
3-5  
Hollandaise sauce, melt: butter, choco- 5-25  
late, gelatine  
min  
Solidify: fluffy omelettes, baked eggs  
10-40  
min  
Simmer rice and milkbased dishes, heat- 25-50  
ing up ready-cooked meals  
Add the minimum two times as  
much liquid as rice, mix milk dishes  
at some point of the procedure  
through.  
min  
5-7  
7-9  
7-9  
9-12  
Steam vegetables, fish, meat  
Steam potatoes  
20-45  
min  
Add some tablespoons of liquid.  
20-60  
min  
Use max. ¼ l water for 750 g of po-  
tatoes.  
Cook larger quantities of food, stews  
and soups  
60-150 Up to 3 l liquid plus ingredients.  
min  
Gentle fry: escalope, veal cordon bleu,  
cutlets, rissoles, sausages, liver, roux,  
eggs, pancakes, doughnuts  
as nec-  
essary  
Turn halfway through.  
12-13 Heavy fry, hash browns, loin steaks,  
steaks  
5-15  
min  
Turn halfway through.  
14  
Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips.  
The Power function is best to heat up large quantities of water.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Care and cleaning  
Information on acrylamides  
Important! According to the newest scientific knowledge, if you brown food (specially the  
one which contains starch), acrylamides can pose a health risk. Thus, we recommend that  
you cook at the lowest temperatures and do not brown food too much.  
CARE AND CLEANING  
Clean the appliance after each use.  
Always use cookware with clean bottom.  
WARNING!  
The sharp objects and abrasive cleaning agents can cause damage to the appliance.  
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.  
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance oper-  
ates.  
To remove the dirt:  
1. – Remove immediately:melted plastic, plastic foil, and food with sugar. If not, the dirt  
can cause damage to the appliance. Use a special scraper for the glass . Put the scra-  
per on the glass surface at an acute angle and move the blade on the surface .  
Remove after the appliance is sufficiently cool:limescale rings , water rings, fat  
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or  
stainless steel.  
2. Clean the appliance with a moist cloth and some detergent.  
3. At the end rub the appliance dry with a clean cloth.  
WHAT TO DO IF…  
Problem  
Possible cause and remedy  
You cannot activate the appli- • Activate the appliance again and set the heat setting in 10  
ance or operate it.  
seconds.  
• You touched 2 or more sensor fields at the same time. Only  
touch one sensor field.  
• The Child Safety Device or the Lock or Stop+Go operates. See  
the chapter Operating instructions.  
• There is water or fat stains on the control panel. Clean the  
control panel.  
A Sound operates and the ap-  
pliance deactivates.  
You put something on one or more sensor fields. Remove the ob-  
ject from the sensor fields.  
A sound operates when the ap-  
pliance is deactivated.  
The appliance deactivates.  
You put something on the . Remove the object from the sensor  
field.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to do if…  
15  
Problem  
Possible cause and remedy  
The residual heat indicator does The cooking zone is not hot because it operated only for a short  
not comes on.  
time. If the cooking zone should be hot, speak to the service cen-  
tre.  
The Automatic Heat Up func-  
tion does not operate.  
• There is still residual heat on the cooking zone. Let the cooking  
zone become sufficiently cool.  
• The highest heat setting is set. The highest heat setting has the  
same power as the Automatic Heat Up function.  
The heat setting changes be-  
tween two levels.  
The Power management is activated. See the section Power man-  
agement.  
The sensor fields become hot.  
The cookware is too large or you out it too near to the controls.  
Put large cookware on the rear cooking zones if it is necessary.  
There is no signal when you  
touch the panel sensor fields.  
The signals are deactivated. Activate the signals (see OffSound  
Control).  
The Automatic Switch Off operates. Deactivate the appliance and  
activate it again.  
comes on  
• No cookware on the cooking zone. Put cookware on the cook-  
ing zone.  
comes on  
• Not correct cookware. Use the correct cookware.  
• The diameter of the bottom of the cookware is too small for  
the cooking zone. Move cookware to a smaller cooking zone.  
There is an error in the appliance.  
Disconnect the appliance from the electrical supply for some  
time. Disconnect the fuse from the electrical system of the house.  
and number comes on.  
comes on  
Connect again. If  
comes on again, speak to the service centre.  
There is an error in the appliance, because a cookware boils dry or  
you use not correct cookware. The protection against become too  
hot for the cooking zone operates. The Automatic Switch Off op-  
erates.  
Deactivate the appliance. Remove the hot cookware. After, ap-  
proximately 30 seconds activate the cooking zone again.  
should go out of the display, residual heat indicator can stay. Let  
the cookware become sufficiently cool and check it with the sec-  
tion Cookware for the induction cooking zone.  
If you tried the above solutions and cannot repair the problem, speak to your dealer or the  
customer service. Give the data from the rating plate, three digit letter, code for the glass  
ceramic (it is in the corner of the glass surface) and an error message that comes on.  
Make sure, you operated the appliance correctly. If not the servicing by a customer service  
technician or dealer will not be free of charge, also during the warranty period. The instruc-  
tions about the customer service and conditions of guarantee are in the guarantee booklet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Environment concerns  
ENVIRONMENT CONCERNS  
The symbol on the product or on its packaging indicates that this product may not be  
treated as household waste. Instead it should be taken to the appropriate collection point  
for the recycling of electrical and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential negative consequences for the  
environment and human health, which could otherwise be caused by inappropriate waste  
handling of this product. For more detailed information about recycling of this product,  
please contact your local council, your household waste disposal service or the shop where  
you purchased the product.  
Packaging material  
The packaging materials are friendly to the environment and can be recycled. The plastic  
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as  
household waste at the waste disposal facilities in your municipality.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
892934396-A-452010  
Download from Www.Somanuals.com. All Manuals Search And Download.  

A4 Tech Digital Camera PK 5 User Manual
ADTRAN Switch 1224 PoE User Manual
Alpine Automobile Alarm SEA 8081 User Manual
Alvin Patio Furniture Pavillon Pedestal User Manual
American DJ DJ Equipment S 100A User Manual
Aspire Digital Laptop 1360 User Manual
Avocent Switch DSR1020 User Manual
Axis Communications Home Theater Server 241SA User Manual
Bakers Pride Oven Oven CO 11E User Manual
Behringer Home Theater System PX3000 User Manual