ADC Network Card Pro Patch User Manual

Pro PatchTM  
Optical Normal Through Panel  
Module Front  
Module Rear  
Chassis Open  
ADCs Optical Normal Through Panel is the latest addition to its Pro Patch line of broadcast  
patching products. This fiber panel is designed to provide patch by exception, normal through  
functionality, similar to copper-based patch panels. Traditional fiber patch panels require a fiber  
jumper to be in place at all times. With this newly designed panel, however, all fiber “Source”  
and “Destination” connections are on the rear of the panel, with a normal through connection  
between the “Source” and “Destination” ports. For greater convenience and reliability, patch and  
monitoring capabilities are accessed on the front of the panel.  
Features  
Module specifications:  
Two density options:  
• Modules may be added to the chassis  
as needed.  
• The 3RU chassis houses 6 modules to  
provide 24 fiber terminations (12 pairs)  
using simplex connectors (SC, FC, ST).  
• “Source” and “Destination” terminations  
may be made by either splicing raw cable  
to pigtails attached to the modules or by  
routing connectorized patch cords to the  
back of the modules.  
• The 4RU chassis houses 6 modules to  
provide 48 fiber terminations (24 pairs)  
using small-form-factor connectors (LC).  
Functionality:  
• Manual switch on front of module to  
change to “Patched” operation.  
• Each module contains pairs of “Source” and  
“Destination” fibers plus optional monitor  
ports and a switch for emergency patching.  
• LED indicators for “Normal” and  
“Patched” operations.  
• Accommodates 1310 and 1550 singlemode  
wavelengths (switch wavelength range is  
1290-1330 and 1525-1610).  
• Modules are available with or without  
monitor ports on the front.  
Chassis specification:  
• Connector ports on front and rear may be  
SC, FC, ST or LC.  
• 19" EIA flush mounting  
• IL through module is approximately 0.5 dB  
(final specifications TBD).  
• Hot swappable power supply  
to power switches inside modules  
• Module port is configurable to 90/10, 95/5  
or 99/1 split ratios.  
• 110/220 IEC interface  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pro PatchTM Optical Normal Through Panel  
Pro Patch™ Preconfigured Panels  
The information below explains the ordering numbers contained in the charts on this page.  
Catalog Number  
PPO - __ __ __ __ __ __ __ __ - __  
Power Supply  
Panel Size  
0
No cord  
3
4
3 RU  
4 RU  
1
With IEC cord  
Rear Cable Management/splice  
Modules Loaded  
0
2
3
Patch cord slack storage  
Heat shrink splice trays  
Mass Fusion splice trays  
1-6 Number of modules loaded  
Front Patch Connector Style  
2
7
J
SMFC  
Rear Connector/Splice  
SMSC  
2
7
J
SMFC  
SMSC (8º angled polish)  
SMLC (4 RU only)  
SMST  
SMSC  
8
4
SMSC (8º angled polish)  
SMLC (4 RU only)  
Pigtail for splicing  
SMST  
8
0
4
Switch Type  
0
2
Standard individual  
Pair switch together  
Monitor Split Style  
Monitor Port Connector  
0
A
B
No monitor  
90/10  
0
F
No monitor  
SMFC (8º angled polish)  
SMSC (8º angled polish)  
SMALC (4 RU only)  
95/5  
J
C
99/1  
Q
Custom configurations are available. Please contact ADC Technical Assistance Center.  
w w w . a d c . c o m  
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0  
1 - 8 0 0 - 3 6 6 - 3 8 9 1  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pro Patch™ Modules  
The information below explains the ordering numbers contained in the charts on this page.  
Catalog Number  
PPO-M __ __ __ __ __ __  
Panel Size  
Rear Connector/Splice  
3
4
3 RU  
4 RU  
7
J
SMSC  
SMSC (8º angled polish)  
SMLC (4 RU only)  
Pigtail for splicing  
SMST  
8
0
4
2
Front Patch Connector Style  
2
7
J
SMFC  
SMSC  
SMFC  
SMSC (8º angled polish)  
SMST  
Monitor Split Style  
4
8
0
A
B
No monitor  
90/10  
SMLC (4 RU only)  
Switch Type  
95/5  
C
99/1  
0
2
Standard individual  
Pair switch together  
Monitor Port Connector  
0
F
No monitor  
SMFC (8º angled polish)  
SMSC (8º angled polish)  
SMALC (4 RU only)  
J
Q
Custom configurations are available. Please contact ADC Technical Assistance Center.  
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080  
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site.  
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101  
Specifications published here are current as of the date of publication of this document. Because we are continuously  
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may  
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.  
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features  
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer  
103447AE 9/06 Revison © 2006 ADC Telecommunications, Inc. All Rights Reserved  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Modem 965DPS User Manual
3M Projector X68 User Manual
Accusplit Watch AX602 User Manual
Acoustic Energy Computer Monitor AE1 Classic User Manual
ADC Switch ASX User Manual
Agri Fab Spreader 45 02143 User Manual
Alamo Lawn Mower SL72 User Manual
Alliance Laundry Systems Washer SF18VNV User Manual
American Dryer Corp Clothes Dryer ADG 410 User Manual
Bakers Pride Oven Food Warmer CHS 1N User Manual