AD Blood Pressure Monitor UA 767 30 User Manual

Digital Blood Pressure Monitor  
Model UA-767 30  
Instruction Manual  
Manuel dinstructions  
Manual de Instrucciones  
Manuale di Istruzioni  
Bedienungsanleitung  
使用手册  
WM+PD4001183  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dear Customers  
Congratulations on purchasing a state-of-the-art A&D blood pressure  
monitor, one of the most advanced monitors available today. Designed  
for ease of use and accuracy, this monitor will facilitate your daily blood  
pressure regimen.  
We recommend that you read through this manual carefully before  
using the device for the first time.  
Preliminary Remarks  
This device conforms to the European Directive 93/42 EEC for Medical  
Products. This is made evident by the  
mark of conformity.  
(0366: The reference number of the designated authority).  
The device is designed for use on adults only, not newborns or infants.  
Environment for use  
The device is for use indoors.  
Precautions  
Precision components are used in the construction of this device.  
Extremes in temperature, humidity, direct sunlight, shock or dust should  
be avoided.  
Clean the device with a soft, dry cloth. Never use thinner, alcohol,  
benzine, or wet cloth.  
Avoid tightly folding the cuff or storing the hose tightly twisted for long  
periods, as such treatment may shorten the life of the components.  
The device and cuff are not water resistant. Prevent rain, sweat and  
water from soiling the device and cuff.  
Measurements may be distorted if the device is used close to televisions,  
microwave ovens, cellular telephones, X-ray or other devices with strong  
electrical fields.  
Used equipment, parts and batteries are not treated as ordinary  
household waste, and must be disposed of according to the applicable  
local regulations.  
English 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Parts Identification  
DC Jack  
START button  
(Orange illumination)  
Display  
Air Connector Plug  
Air Socket  
Arm Cuff  
Air Hose  
Proper Fit Range  
Index Mark  
Battery Cover  
Battery Compartment  
1.5V Batteries  
(R6P, LR6 or AA)  
MEMORY  
Systolic Pressure  
Diastolic Pressure  
Part of Display  
Pressure Bar Indicator  
and  
WHO Classification Indicator  
Pulse Rate  
Heart Mark  
Battery Indicator  
I.H.B. Indicator (Irregular heartbeat indicator)  
English 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Symbols  
Function / Meaning  
Symbols  
Recommended Action  
Standby and Turn the device on.  
Battery installation guide  
Direct current  
SN  
Serial number  
Date of manufacture  
Type BF: Device, cuff and tubing are  
designed to provide special protection  
against electrical shocks.  
The indicator while measurement is in Measurement is in  
progress. It blinks while detecting the progress. Remain as still  
pulse.  
as possible.  
Irregular Heartbeat indicator.  
(I.H.B.)  
The indicator that detects irregular  
heartbeats or any excessive body  
movement during the measurement.  
Previous measurements stored in  
MEMORY.  
The battery power indicator during  
measurement.  
Full Battery  
Replace all batteries with  
new ones, when the  
indicator blinks.  
The battery is low when it blinks.  
Low Battery  
Try measurement again.  
Remain very still during  
the measurement.  
Unstable blood pressure due to  
movement during the measurement.  
The systolic and diastolic values are  
within 10 mmHg of each other.  
The pressure value did not increase  
during inflation.  
Fasten the cuff correctly,  
and try the measurement  
again.  
The cuff is not fastened correctly.  
The pulse is not detected correctly.  
PUL. DISPLAY ERROR  
SYS  
Systolic blood pressure in mmHg  
Diastolic blood pressure in mmHg.  
Pulse per minute  
DIA  
PUL./min  
EC directive medical device label  
WEEE label  
English 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operation Mode  
1. Normal Measurement With Storing Data ( Refer to page 8)  
Press the START button. Blood pressure is measured and data is stored  
within the device. The device can store the last thirty sets of data in  
memory automatically.  
2. Recalling Data  
Press and hold the START button to recall the  
data. Stored data are automatically displayed in  
order from the last data.  
Press and hold  
Data number  
The device can store the last thirty sets of data  
in memory automatically.  
Alternation  
Stored Data  
3. Clearing Data  
Remove batteries to clear all data. Re-install them again.  
4. Measurement With The Desired Systolic Pressure  
Refer to page 9 for the measurement with the desired systolic pressure.  
English 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Monitor  
Step 1  
Installing / Changing The Batteries  
1. Slide the battery cover up to open it.  
Step 3  
2. Remove the used batteries and insert  
new  
batteries  
into  
the  
battery  
compartment as shown, taking care that  
the polarities (+) and (-) are correct.  
Step 2  
3. Slide the battery cover down to close it.  
Use only R6P, LR6 or AA batteries.  
CAUTION  
Insert the batteries as shown in the battery compartment. If not, the device will  
not work.  
When  
(LOW BATTERY mark) blinks in the display, replace all batteries with  
new ones. Do not mix old and new batteries. It may shorten the battery life, or  
cause the device to malfunction.  
(LOW BATTERY mark) does not appear when the batteries are drained.  
Battery life varies with the ambient temperature and may be shorter at low  
temperatures.  
Use the specified batteries only. The batteries provided with the device are for  
testing monitor performance and may have a limited life.  
Remove the batteries if the device is not to be used for a long time.  
The batteries may leak and cause a malfunction.  
Stored data are cleared when the batteries are removed.  
Air Hose  
Connecting The Air Hose  
Insert the air connector plug into  
the air socket firmly.  
Air Connector Plug  
Air Socket  
Selecting The Correct Cuff  
Using the correct cuff size is important for an accurate reading. If the cuff is not  
the proper size, the reading may yield an incorrect blood pressure value.  
The index  
correct cuff. (Refer to "Attaching The Arm Cuff" on next page)  
If the index points outside of the range, contact your local dealer for replacement.  
and proper fit range, on the cuff, tell you if you are attaching the  
Arm Size  
Recommended Cuff Size  
Large cuff  
Order No.  
32 cm to 42 cm  
22 cm to 32 cm  
18 cm to 22 cm  
UA-CUFDBKLA-EC  
UA-CUFDBKAU-EC  
UA-CUFDBKCH-EC  
Medium cuff  
Small cuff  
Arm size: The circumference at the biceps.  
English 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Monitor  
Rolled up shirtsleeve  
Attaching The Arm Cuff  
1. Wrap the cuff around the upper arm,  
about 2 - 3 cm above the elbow, as  
shown. Place the cuff directly against  
the skin, as clothing may cause a faint  
pulse and result in a measurement  
error.  
Cuff  
Air Hose  
2. Constriction of the upper arm, caused  
by rolling up a shirtsleeve, may prevent  
accurate readings.  
2 -3 cm  
Constriction of the Upper Arm  
3. Confirm that the index  
the proper fit range.  
points within  
How To Take Proper Measurements  
For the most accurate blood pressure  
measurement:  
Sit comfortably around the table.  
Rest your arm on the table.  
Relax for about five to ten minutes  
before measurement.  
Index  
and Proper fit range  
Place the center of the cuff at the same height as your heart.  
Remain still and keep quiet during measurement.  
Do not measure right after physical exercise or a bath. Rest for twenty or  
thirty minutes before taking the measurement.  
Try to measure your blood pressure at the same time every day.  
Measurement  
During measurement, it is normal for the cuff to feel very tight. (Do not be  
alarmed)  
After Measurement  
After measurement, press the START button to turn off the power.  
Remove the cuff and record your data.  
Note: The device has an automatic power shut-off function, which turns the  
power off approximately one minute after measurement.  
Allow at least ten minutes between measurements on the same person.  
English 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Measurements  
30 is designed to detect the pulse and to inflate the  
Model UA-767  
cuff to a systolic pressure level automatically.  
If your systolic pressure is expected to exceed 230 mmHg or you use the  
optional small cuff, read "Measurement With The Desired Systolic  
Pressure" on next page.  
Normal Measurement  
1. Place the cuff on the arm (preferably the left arm).  
At heart level  
Sit quietly during measurement.  
2. Press the START button.  
START button  
Averaged data  
The average blood pressures and last data  
number are displayed briefly. Then the  
display changes, as indicated in the figure  
at the right, as the measurement begins.  
The cuff starts to inflate. It is normal for the  
cuff to feel very tight. A pressure bar  
indicator is displayed, as in the figure at  
the right, during inflation.  
Data number  
Starts inflation  
Pressurizing  
Note: If you wish to stop inflation at any time,  
press the START button again.  
3. When inflation is complete, deflation starts  
automatically and the  
(heart mark)  
blinks, indicating that the measurement is  
in progress. Once the pulse is detected,  
the mark flashes with each pulse beat.  
Measurement  
in progress  
Note: If an appropriate pressure is not  
obtained, the device starts to inflate  
again automatically.  
Systolic pressure  
Diastolic pressure  
WHO classification  
Pulse rate  
4. When the measurement is complete, the  
systolic and diastolic pressure readings and  
pulse rate are displayed. The cuff exhausts  
the remaining air and deflates completely.  
5. Press the START button again to turn  
off the power.  
Exhausts remaining  
air automatically  
Note: Model UA-767  
30 is provided with an automatic power  
shut-off function. Allow at least ten minutes between  
measurements on the same person.  
English 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Measurements  
Measurement With The Desired Systolic Pressure  
If your systolic pressure is expected to exceed 230 mmHg or you use the  
optional small cuff, use this procedure.  
1. Place the cuff on the arm (preferably the left arm).  
At heart level  
2. Press and hold the START button  
until a number about 30 to 40 mmHg  
higher than your expected systolic  
Press and hold the button  
Release the button  
at the desired  
systolic pressure  
pressure appears.  
3. Release the START button to start  
measurement, when the desired  
number is reached. Then continue to  
measure your blood pressure as  
described on the previous page.  
Refer to the previous page  
for measurement  
Notes For Proper Measurement  
Sit down in a comfortable position. Place the arm to be used for the  
measurement on a table or other support so that the center of the cuff  
will be at the same height as your heart.  
Relax for about five or ten minutes before taking a measurement. If you  
are excited or depressed by emotional stress, the measurement will  
reflect this stress as a higher (or lower) than normal blood pressure  
reading and the pulse reading will usually be faster than normal.  
An individual's blood pressure varies constantly, depending on what you  
are doing and what you have eaten. What you drink can have a very  
strong and rapid effect on your blood pressure.  
This device bases its measurements on the heartbeat. If you have a very  
weak or irregular heartbeat, the device may have difficulty determining  
your blood pressure.  
Should the device detect a condition that is abnormal, it will stop the  
measurement and display an error symbol. See page 4 for the  
description of symbols.  
This blood pressure monitor is intended for use by adults only. Consult  
with your physician before using this device on a child. A child should not  
use this device unattended.  
English 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
What Is An Irregular Heartbeat  
Model UA-767  
30 blood pressure monitor provides a blood  
pressure and pulse rate measurement even when an irregular heartbeat  
occurs. An irregular heartbeat is defined as a heartbeat that varies by  
25% from the average of all heartbeats during the blood pressure  
measurement. It is important that you be relaxed, remain still and do not  
talk during measurements.  
Note: We recommend contacting your physician if you see this  
indicator frequently.  
Pressure Bar Indicator  
The indicator monitors the progress of pressure during measurement.  
Pressurizing  
Releasing air  
Inflation in progress  
Measurement in progress  
Inflation complete  
WHO Classification Indicator  
Example:  
Each six segments of the bar indicator  
correspond to the WHO blood pressure  
classification described on the next page.  
WHO Classification Indicator  
Severe hypertension  
Moderate hypertension  
Mild hypertension  
High normal  
Moderate hypertension  
Mild hypertension  
High normal  
Normal  
Optimal  
:
The indicator displays a segment, based  
on the current data, corresponding to the  
WHO classification.  
English 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About Blood Pressure  
What Is Blood Pressure?  
Blood pressure is the force exerted by blood against the walls of the arteries.  
Systolic pressure occurs when the heart contracts. Diastolic pressure occurs  
when the heart expands. Blood pressure is measured in millimeters of  
mercury (mmHg). One's natural blood pressure is represented by the  
fundamental pressure, which is measured first thing in the morning while one  
is still at rest and before eating.  
What Is Hypertension And How Is It Controlled?  
Hypertension, an abnormally high arterial blood pressure, if left unattended,  
can cause many health problems including stroke and heart attack.  
Hypertension can be controlled by altering lifestyle, avoiding stress, and with  
medication under a doctor’s supervision.  
To prevent hypertension or keep it under control:  
Do not smoke  
Exercise regularly  
Reduce salt and fat intake  
Maintain proper weight  
Have regular physical checkups  
Why Measure Blood Pressure At Home?  
Blood pressure measured at a clinic or doctor's office may cause  
apprehension and can produce an elevated reading, 25 to 30 mmHg higher  
than that measured at home. Home measurement reduces the effects of  
outside influences on blood pressure readings, supplements the doctor's  
readings and provides a more accurate, complete blood pressure history.  
WHO Blood Pressure Classification  
Standards to assess high  
blood  
pressure,  
without  
regard to age, have been  
established by the World  
Health Organization (WHO),  
as shown in the chart .  
Blood Pressure Variations  
An individual’s blood pressure  
varies greatly on a daily and  
seasonal basis. It may vary by  
30 to 50 mmHg due to various conditions during the day. In hypertensive  
individuals’ variations are even more pronounced. Normally, the blood  
pressure rises while at work or play and falls to its lowest levels during sleep.  
So, do not be overly concerned by the results of one measurement.  
Take measurements at the same time every day using the procedure  
English 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
described in this manual to get to know  
your normal blood pressure. Regular  
readings give a more comprehensive blood  
pressure history. Be sure to note date and  
time when recording your blood pressure.  
Consult your doctor to interpret your blood  
pressure data.  
Troubleshooting  
Problem  
Nothing  
appears in the  
display, even  
when the power  
is turned on.  
Possible Reason  
Recommended Action  
Replace all batteries with new  
ones.  
Batteries are drained.  
Reinstall the batteries with  
Battery terminals are not negative and positive terminals  
in the correct position.  
matching those indicated on the  
battery compartment.  
Battery voltage is too  
low.  
(LOW BATTERY  
mark) blinks. [ If the  
batteries are drained  
completely, the mark  
does not appear.]  
The cuff is not fastened  
properly.  
The cuff does  
not inflate.  
Replace all batteries with new  
ones.  
Fasten the cuff correctly.  
You moved your arm or Make sure you remain very still  
body during the  
measurement.  
and quiet during the  
measurement.  
The unit does  
not measure.  
Readings are  
too high or too  
low.  
Sit comfortably and still.  
Raise your hand so that the cuff  
is at the same level as your heart.  
If you have a very weak or  
irregular heat beat, the device  
may have difficulty in determining  
your blood pressure.  
The cuff position is not  
correct.  
The value is different  
from that measured at a  
clinic or doctor’s office.  
See “Why measure blood  
pressure at home”.  
Other  
Remove the batteries. Place  
them back properly and try the  
measurement again.  
Note: If the actions described above do not solve the problem, contact the  
dealer. Do not attempt to open or repair this product, as any attempt to  
do so will make your warranty invalid.  
English 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintenance  
Do not open the device. It uses delicate electrical components and an  
intricate air unit that could be damaged. If you cannot fix the problem  
using the troubleshooting instructions, request service from your dealer  
or from the A&D service group. The A&D service group will provide  
technical information, spare parts and units to authorized dealers.  
The device was designed and manufactured for a long service life.  
However it is generally recommended to have the monitor inspected  
every 2 years, to ensure proper functioning and accuracy. Please contact  
either your authorized dealer or A&D for maintenance.  
Technical Data  
Type  
UA-767  
30  
Measurement method  
Measurement range  
Oscillometric measurement  
Pressure: 20 - 280 mmHg  
Pulse:  
40 - 200 beats / minute  
Measurement accuracy  
Power supply  
Pressure: ±3 mmHg or 2%, whichever is greater  
Pulse:  
±5%  
4 x 1.5V batteries (R6P, LR6 or AA)  
Upper arm circumference 22 - 32 cm  
Classification  
Clinical test  
EMC  
Type BF  
According to ANSI / AAMI SP-10 1987  
IEC 60601-1-2: 2001  
Memory  
Last 30 measurements  
Operating condition  
Storage condition  
Dimensions  
Weight  
+10°C to +40°C / 30%RH to 85 %RH  
-10°C to +60°C / 30%RH to 85 %RH  
Approx. 147 [W] x 64 [H] x 110 [D] mm  
Approx. 300 g, excepting batteries  
Note: Specifications are subject to change without prior notice.  
English 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acer Computer Hardware S3811 User Manual
Acer Flat Panel Television AT2621 AT2622 User Manual
Acroprint Modem RS 232 User Manual
Acu Rite Weather Radio 02010 CCDI User Manual
Agilent Technologies Laptop FS2331 User Manual
Allied Telesis Network Router VPN User Manual
Audiovox Remote Starter APS 410a User Manual
Axis Communications Security Camera AXIS M3026 VE User Manual
Axis Communications Security Camera Q604 User Manual
Barco Projector R5975236 User Manual