Bluetooth Mouse User Guide
Model: BT-630
Download from Www.Somanuals.com. All Manuals Search And Download.
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to
OET65. The equipment has very low levels of RF energy that it is deemed to comply without
testing of specific absorption ratio (SAR).
Package Contents
1. Bluetooth Mouse
2. 1*AA Battery
3. Quick Set Up Guide
4. CD (CD User Manual)
Features
1. Bluetooth V2.0, 10 meter range
— 2 —
Download from Www.Somanuals.com. All Manuals Search And Download.
2. 1000DPI
3. Four stages power saving mode, low battery warning
4. 8 in Right software, innovative 4D wheel
System Requirement: Windows XP/ Vista / Windows 7
Know your product
— 3 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Back View
Front View
Dual-color LED Indicator
Bluetooth Mouse
LED Status
Power On
Green LED: Turn off after 1 Second
Red LED: Blinking
Low Battery Warning
Connection Start
Alternate Blink Between Red and Green
Stop Blinking
Connection Complete
Turn On/Off Mouse
— 4 —
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Slide on the power switch to immediately turn on the
mouse.
2. To turn off the mouse, just slide off the power switch and
then LED light is off immediately.
Battery Installation
Open battery cover and insert the supplied AA battery. Please make sure that the positive (+)
and negative (-) ends of the battery match the polarity indicators inside the battery
compartment.
Power Saving Management
Four stages power saving mode provide the best power saving management. In Deep Sleep, the
mouse can
be activated by clicking any mouse buttons. In other sleep statuses, just move the mouse to
activate
it.
— 5 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Time elapses to enter the
mode
Status
Power Consumption
Way to wake up
Stand-by
Slight Sleep
Middle Sleep
Deep Sleep
0 second
2 seconds
4 seconds
5 minutes
20mA
10mA
1.7mA
0.3mA
Moving
Moving
Moving
Clicking
Note: The mouse will enter Deep Sleep ten seconds after turning off PC. To wake it up, turn
on PC and click any mouse button.
— 6 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Our Bluetooth Mouse is designed to work with Five major software standards: Microsoft,
Broadcom, IVT,Toshiba, Apple. Please select the corresponding connection way according to
your software standard.
Bluetooth
Bluetooth
Software
Vendor
Bluetooth
Software
Name
Bluetooth
Device Not
Inserted
Bluetooth
Device In
Working
Device
Already
Inserted
Support
Version
Windows
XP(SP2) Above
Windows
Bluetooth
Microsoft
Broadcom
IVT
Widcomm
BlueSoleil
V4.0 Above
V5.0 Above
V3.0 Above
Bluetooth
Stack
Toshiba
Mac OS X
10.4~10.5
Above
Mac OS X
Bluetooth
Apple
— 7 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Note：Before start Bluetooth Mouse connectivity, please check whether your system has
already installed Bluetooth software and whether it works.
Bluetooth Software: MICROSOFT
Step 1：Click Start, click Control Panel Step 2：In popped Bluetooth Devices
(make sure you're in Classic View), and
window,Click Add.
then double-click Bluetooth Devices.
— 8 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3：Turn on the mouse and press the Step 4：After the device names appear,click
connection button at the bottom of mouse
until the LED Indicator in the middle
wheel blinks alternately in Red and
Green. In the Add Bluetooth Device
Wizard, select the My device is set up and
ready to be found check box, and then
click Next.
Bluetooth Mouse, and then click Next.
— 9 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5：When the wizard asks to specify a Step 6 ： Please wait while the wizard
completes the process of adding your
Bluetooth mouse. In the final page of the
wizard, click Finish, and then click OK.
The LED Indicator in the middle wheel
stops blinking.
passkey, click Don't use a passkey, and
then click Next.
Bluetooth Software: WIDCOMM
— 10 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1：Right click on Bluetooth icon
located at system tray, then select Add a
Bluetooth Device.
Step 2：In popped Initial Bluetooth
Configuration Wizard, Click Next.
Step 3：Turn on the mouse and press the Step 4：After the device names appear,click
connection button at the bottom of mouse
until the LED Indicator in the middle
wheel blinks alternately in Red and Green.
In Bluetooth Devices Selection, it will
BlueTooth Mouse, and then click Next.
automatically
detects
discoverable
bluetooth devices.
— 11 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5：Please wait while the wizard completes the processof adding your Bluetooth mouse.
In the final page of the wizard, click Click here. The LED Indicator in the middle wheel
stops blinking, the Bluetooth mouse has successfully installed.
Bluetooth Software: BLUESOLEIL
Step 1：Right click on Bluetooth icon
located at system tray, then select Add a
Display Classic View.
Step 2：Double click orange circle button to
start searching Bluetooth devices.
— 12 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3：Turn on the mouse and press the Step 4：Right click on the mouse icon and
connection button at the bottom of mouse
until the LED Indicator in the middle
wheel blinks alternately in Red and
Green. The mouse icon will display after
searching Bluetooth devices sucessfully.
select Connect Bluetooth Human Interface
Device.
— 13 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 ： The Bluetooth mouse will
automatically complete the connection.
The bluetooth mouse has successfully
installed while the LED Indicator in the
middle wheel stops blinking.
Bluetooth Software: Bluetooth Stack
— 14 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1：Right click on Bluetooth icon
located at system tray, then select Add
New Connection.
Step 2：In popped Bluetooth Settings, Click
New Connection.
Step 3：Turn on the mouse and press the Step 4：Please wait until the device names
connection button at the bottom of mouse appear,click
until the LED Indicator in the middle BlueTooth Mouse, and then click Next.
wheel blinks alternately in Red and
Green. In Add New Connection Wizard,
click Express Mode, and then click Next
to search Bluetooth devices.
— 15 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 ： Please wait while the wizard Step 6：The LED Indicator in the middle
completes the process of adding your wheel stops blinking after the mouse has
Bluetooth mouse. The mouse doesn’t successfully installed.
require Passkey(PIN code).
Bluetooth Software: Mac OS X Bluetooth
— 16 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1：Right click on Bluetooth icon
located at system tray, then select Set up continue setup. Select Mouse when below
window appears.
Step 2：Follow on-screen instructions to
Bluetooth Device.
Step 3：Turn on the mouse and press the Step 4 ： The bluetooth mouse has
connection button at the bottom of mouse
until the LED Indicator in the middle
wheel blinks alternately in Red and
Green. After device names appear, click
BlueTooth Mouse, and then click Next.
successfully installed while the LED
Indicator in the middle wheel stops
blinking. You can choose to set up
another device or click Quit to exit.
— 17 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
1. Before installing the mouse software, please uninstall any previously installed mouse
software.
2. Insert enclosed CD to start installation.
3. Follow on-screen instructions to complete the installation.
4. The icon
software.
will appear on your desktop, then you have successfully installed the
5. To launch the software, double click the icon
on your desktop or go to Start—
Programs—A4tech 8 in Right, then the icon will appear in the taskbar at the right
corner of your screen.
— 18 —
Download from Www.Somanuals.com. All Manuals Search And Download.
.For more completed instructions on how to set up this software, please refer to software
manual in CD.
** Features and specifications of all A4 TECH products are subject to change without
notification.
— 19 —
Download from Www.Somanuals.com. All Manuals Search And Download.
|